Improvement of antagonistic capability of Trichoderma harzianum by UV-Irradiation for management of Macrophomina phaseolina

Antagonistic capability of Trichoderma harzianum was improved through UV-irradiation. Four different type of mutants, T. harzianum - M_a (Th-M_a), T. harzianum - M_b(Th-M_b), T. harzianum - M_c (Th-M_c), T. harzianum - M_d (Th-M_d) of T. harzianum and the parent strain (Th-P) were selected for further studies. Th-M_a and Th-M_b showed more antagonistic capability against Macrophomina phaseolina than its parent strain Th-P in dual culture. Biochemical analysis of these four mutants and the parent strain showed that Th-M_a releases higher level of two lytic enzymes i.e. chitinases and cellulases and Th-M_b produces more β-1,3-glucanase activity than the parent strain. Culture filtrate of Th-M_a also showed antifungal properties. Study of the competitive saprophytic ability (CSA) of these four mutants and the parent strain were also made. Th-M_a exhibited higher CSA than the parental isolate while Th-M_d had less CSA than all other mutants and the parent strain of T. harzianum.     

pH profiles of cellulases depend on the substrate and architecture of the binding region

Understanding the pH effect of cellulolytic enzymes is of great technological importance. In this study, we have examined the influence of pH on activity and stability for central cellulases (Cel7A, Cel7B, Cel6A from Trichoderma reesei, and Cel7A from Rasamsonia emersonii). We systematically changed pH from 2 to 7, temperature from 20°C to 70°C, and used both soluble (4-nitrophenyl β- d -lactopyranoside [pNPL]) and insoluble (Avicel) substrates at different concentrations. Collective interpretation of these data provided new insights. An unusual tolerance to acidic conditions was observed for both investigated Cel7As, but only on real insoluble cellulose. In contrast, pH profiles on pNPL were bell-shaped with a strong loss of activity both above and below the optimal pH for all four enzymes. On a practical level, these observations call for the caution of the common practice of using soluble substrates for the general characterization of pH effects on cellulase activity. Kinetic modeling of the experimental data suggested that the nucleophile of Cel7A experiences a strong downward shift in pK_a upon complexation with an insoluble substrate. This shift was less pronounced for Cel7B, Cel6A, and for Cel7A acting on the soluble substrate, and we hypothesize that these differences are related to the accessibility of water to the binding region of the Michaelis complex.     

Structure and dynamics of Trichoderma harzianum Cel7B suggest molecular architecture adaptations required for a wide spectrum of activities on plant cell wall polysaccharides

Cellulases from glycoside hydrolase family 7 (GH7) play crucial roles in plant lignocellulose deconstruction by fungi, but structural information available for GH7 fungal endoglucanases is limited when compared to the number of known sequences in the family. Here, we report the X-ray structure of the glycosylated catalytic domain (CD) of Trichoderma harzianum endoglucanase, ThCel7B, solved and refined at 2.9 Å resolution. Additionally, our extensive molecular dynamics simulations of this enzyme in complex with a variety of oligosaccharides provide a better understanding of its promiscuous hydrolytic activities on plant cell wall polysaccharides. The simulations demonstrate the importance of the hydrogen bond between substrate O2 hydroxyl in the subsite −1 and a side chain of catalytic Glu196 which renders ThCel7B capable to catalytically cleave cello and xylooligosaccharides, but not mannooligosaccharides. Moreover, detailed structural analyses and MD simulations revealed an additional binding pocket, suitable for accommodation of oligosaccharide decorations and/or substrates with mixed glycoside bonds that abuts onto the binding cleft close to subsite +2.     

The relationship between thermal stability and pH optimum studied with wild-type and mutant Trichoderma reesei cellobiohydrolase Cel7A.

The major cellulase secreted by the filamentous fungus Trichoderma reesei is cellobiohydrolase Cel7A. Its three-dimensional structure has been solved and various mutant enzymes produced. In order to study the potential use of T. reesei Cel7A in the alkaline pH range, the thermal stability of Cel7A was studied as a function of pH with the wild-type and two mutant enzymes using different spectroscopic methods. Tryptophan fluorescence and CD measurements of the wild-type enzyme show an optimal thermostability between pH 3.5-5.6 (Tm, 62 +/- 2 degrees C), at which the highest enzymatic activity is also observed, and a gradual decrease in the stability at more alkaline pH values. A soluble substrate, cellotetraose, was shown to stabilize the protein fold both at optimal and alkaline pH. In addition, unfolding of the Cel7A enzyme and the release of the substrate seem to coincide at both acidic and alkaline pH, demonstrated by a change in the fluorescence emission maximum. CD measurements were used to show that the five point mutations (E223S/A224H/L225V/T226A/D262G) that together result in a more alkaline pH optimum [Becker, D., Braet, C., Brumer, H., III, Claeyssens, M., Divne, C., Fagerstr?m, R.B., Harris, M., Jones, T.A., Kleywegt, G.J., Koivula, A., et al. (2001) Biochem. J.356, 19-30], destabilize the protein fold both at acidic and alkaline pH when compared with the wild-type enzyme. In addition, an interesting time-dependent fluorescence change, which was not observed by CD, was detected for the pH mutant. Our data show that in order to engineer more alkaline pH cellulases, a combination of mutations should be found, which both shift the pH optimum and at the same time improve the thermal stability at alkaline pH range.     

Solid state production of polygalacturonase and xylanase by Trichoderma species using cantaloupe and watermelon rinds

Different solid state fermentation (SSF) sources were tested such as cantaloupe and watermelon rinds, orange and banana peels, for the production of polygalacturonase (PG) and xylanase (Xyl) by Trichoderma harzianum and Trichoderma virens. The maximum production of both PG and Xyl were obtained by T. harzianum and T. virnes grown on cantaloupe and watermelon rinds, respectively. Time course, moisture content, temperature, pH, supplementation with carbon and nitrogen sources were optimized to achieve the maximum production of both PG and Xyl of T. harzianum and T. virens using cantaloupe and watermelon rinds, respectively. The maximum production of PG and Xyl of T. harzianum and T. virens was recorded at 4–5 days of incubation, 50–66% moisture, temperature 28–35°C and pH 6–7. The influence of supplementary carbon and nitrogen sources was studied. For T. harzianum, lactose enhanced PG activity from 87 to 120 units/g solid, where starch and maltose enhanced Xyl activity from 40 to 55–60 units/g solid for T. virnes. Among the nitrogen sources, ammonium sulphate, ammonium nitrate, yeast extract and urea increased PG activity from 90 to 110–113 units/g solid for T. harzianum. Similarly, ammonium chloride, ammonium sulphate and yeast extract increased Xyl activity from 45 to 55–70 units/g solid for T. virens.     

Implications of cellobiohydrolase glycosylation for use in biomass conversion

The cellulase producing ascomycete, Trichoderma reesei (Hypocrea jecorina), is known to secrete a range of enzymes important for ethanol production from lignocellulosic biomass. It is also widely used for the commercial scale production of industrial enzymes because of its ability to produce high titers of heterologous proteins. During the secretion process, a number of post-translational events can occur, however, that impact protein function and stability. Another ascomycete, Aspergillus niger var. awamori, is also known to produce large quantities of heterologous proteins for industry. In this study, T. reesei Cel7A, a cellobiohydrolase, was expressed in A. niger var. awamori and subjected to detailed biophysical characterization. The purified recombinant enzyme contains six times the amount of N-linked glycan than the enzyme purified from a commercial T. reesei enzyme preparation. The activities of the two enzyme forms were compared using bacterial (microcrystalline) and phosphoric acid swollen (amorphous) cellulose as substrates. This comparison suggested that the increased level of N-glycosylation of the recombinant Cel7A (rCel7A) resulted in reduced activity and increased non-productive binding on cellulose. When treated with the N-glycosidase PNGaseF, the molecular weight of the recombinant enzyme approached that of the commercial enzyme and the activity on cellulose was improved.     

Effect of pH and Temperature on Enzyme Activity of Chitosanase Produced Under Solid Stated Fermentation by <Emphasis Type="Italic">Trichoderma</Emphasis> spp<Emphasis Type="Italic">.</Emphasis>

Trichoderma strains were extensively studied as biocontrol agents due to their ability of producing hydrolytic enzymes, which are considered key enzymes because they attack the insect exoskeleton allowing the fungi infection. The present work aimed to evaluate the ability of chitosanase production by four Trichoderma strains (T. harzianum, T. koningii, T. viride and T. polysporum) under solid stated fermentation and to evaluate the effect of pH and temperature on enzyme activity. pH strongly affected the enzyme activity from all tested strains. Chitosanase from T. harzianum and T. viride presented optimum activity at pH 5.0 and chitosanase from T. koningii and T. polysporum presented optimum activity at pH 5.5. Temperature in the range of 40–50°C did not affect enzyme activity. T. polysporum was found as the most promising strain to produce chitosanase with maximal enzyme activity of about 1.4 IU/gds, followed by T. viride (~1.2 IU/gds) and T. harzianum (1.06 IU/gds).     

Improving the thermostability and activity of Melanocarpus albomyces cellobiohydrolase Cel7B

Two different types of approach were taken to improve the hydrolytic activity towards crystalline cellulose at elevated temperatures of Melanocarpus albomyces Cel7B (Ma Cel7B), a single-module GH-7 family cellobiohydrolase. Structure-guided protein engineering was used to introduce an additional tenth disulphide bridge to the Ma Cel7B catalytic module. In addition, a fusion protein was constructed by linking a cellulose-binding module (CBM) and a linker from the Trichoderma reesei Cel7A to the C terminus of Ma Cel7B. Both approaches proved successful. The disulphide bridge mutation G4C/M70C located near the N terminus, close to the entrance of the active site tunnel of Ma Cel7B, led to improved thermostability (ΔT _m = 2.5°C). By adding the earlier found thermostability-increasing mutation S290T (ΔT _m = 1.5°C) together with the disulphide bridge mutation, the unfolding temperature was increased by 4°C (mutant G4C/M70C/S290T) compared to that of the wild-type enzyme, thus showing an additive effect on thermostability. Both disulphide mutants had increased activity towards microcrystalline cellulose (Avicel) at 75°C, apparently solely because of their improved thermostability. The addition of a CBM also improved the thermostability (ΔT _m = 2.5°C) and caused a clear (sevenfold) increase in the hydrolysis activity of Ma Cel7B towards Avicel at 70°C.     

Cloning, expression, and characterization of novel thermostable family 7 cellobiohydrolases

As part of the effort to find better cellulases for bioethanol production processes, we were looking for novel GH-7 family cellobiohydrolases, which would be particularly active on insoluble polymeric substrates and participate in the rate-limiting step in the hydrolysis of cellulose. The enzymatic properties were studied and are reported here for family 7 cellobiohydrolases from the thermophilic fungi Acremonium thermophilum, Thermoascus aurantiacus, and Chaetomium thermophilum. The Trichoderma reesei Cel7A enzyme was used as a reference in the experiments. As the native T. aurantiacus Cel7A has no carbohydrate-binding module (CBM), recombinant proteins having the CBM from either the C. thermophilum Cel7A or the T. reesei Cel7A were also constructed. All these novel acidic cellobiohydrolases were more thermostable (by 4-10 degrees C) and more active (two- to fourfold) in hydrolysis of microcrystalline cellulose (Avicel) at 45 degrees C than T. reesei Cel7A. The C. thermophilum Cel7A showed the highest specific activity and temperature optimum when measured on soluble substrates. The most effective enzyme for Avicel hydrolysis at 70 degrees C, however, was the 2-module version of the T. aurantiacus Cel7A, which was also relatively weakly inhibited by cellobiose. These results are discussed from the structural point of view based on the three-dimensional homology models of these enzymes.     

In‐depth characterization of Trichoderma reesei cellobiohydrolase TrCel7A produced in Nicotiana benthamiana reveals limitations of cellulase production in plants by host‐specific post‐translational modifications

Sustainable production of biofuels from lignocellulose feedstocks depends on cheap enzymes for degradation of such biomass. Plants offer a safe and cost‐effective production platform for biopharmaceuticals, vaccines and industrial enzymes boosting biomass conversion to biofuels. Production of intact and functional protein is a prerequisite for large‐scale protein production, and extensive host‐specific post‐translational modifications (PTMs) often affect the catalytic properties and stability of recombinant enzymes. Here we investigated the impact of plant PTMs on enzyme performance and stability of the major cellobiohydrolase TrCel7A from Trichoderma reesei, an industrially relevant enzyme. TrCel7A was produced in Nicotiana benthamiana using a vacuum‐based transient expression technology, and this recombinant enzyme (TrCel7A^rec) was compared with the native fungal enzyme (TrCel7A^nat) in terms of PTMs and catalytic activity on commercial and industrial substrates. We show that the N‐terminal glutamate of TrCel7A^rec was correctly processed by N. benthamiana to a pyroglutamate, critical for protein structure, while the linker region of TrCel7A^rec was vulnerable to proteolytic digestion during protein production due to the absence of O‐mannosylation in the plant host as compared with the native protein. In general, the purified full‐length TrCel7A^rec had 25% lower catalytic activity than TrCel7A^nat and impaired substrate‐binding properties, which can be attributed to larger N‐glycans and lack of O‐glycans in TrCel7A^rec. All in all, our study reveals that the glycosylation machinery of N. benthamiana needs tailoring to optimize the production of efficient cellulases.     

Improvements in Glucose Sensitivity and Stability of Trichoderma reesei β-Glucosidase Using Site-Directed Mutagenesis

Glucose sensitivity and pH and thermal stabilities of Trichoderma reesei Cel1A (Bgl II) were improved by site-directed mutagenesis of only two amino acid residues (L167W or P172L) at the entrance of the active site. The Cel1A mutant showed high glucose tolerance (50% of inhibitory concentration = 650 mM), glucose stimulation (2.0 fold at 50 mM glucose), and enhanced specific activity (2.4-fold) compared with those of the wild-type Cel1A. Furthermore, the mutant enzyme showed stability at a wide pH range of 4.5–9.0 and possessed high thermal stability up to 50°C with 80% of the residual activities compared with the stability seen at the pH range of 6.5–7.0 and temperatures of up to 40°C in the wild-type Cel1A. Kinetic studies for hydrolysis revealed that the Cel1A mutant was competitively inhibited by glucose at similar levels as the wild-type enzyme. Additionally, the mutant enzyme exhibited substrate inhibition, which gradually disappeared with an increasing glucose concentration. These data suggest that the glucose stimulation was caused by relieve the substrate inhibition in the presence of glucose. To conclude, all the properties improved by the mutagenesis would be great advantages in degradation of cellulosic biomass together with cellulases.     

Optimization of formation and regeneration of protoplasts from biocontrol agents ofTrichoderma species

The optimal conditions necessary for a large yield and a high frequency of regeneration of protoplasts isolated from the biocontrol agentsTrichoderma koningii andT. harzianum were investigated. Protoplast yields were 1.2×10⁸/ml fromT. koningii and 6×10⁷/ml fromT. harzianum when 20-h mycelial culture was treated with a lytic enzyme solution containing Novozym 234 (15 mg/ml), sucrose (0.6 M) and citrate phosphate buffer (0.02 M), pH 5.6 at 31°C. When the protoplasts were grown in the regeneration medium containing yeast extract (1.5%), 1 I of Mandel's salts, pH 5.6, and glucose (0.8 M), a high frequency of regeneration of the protoplast was obseved: 66% forT. koningii and 45% forT. harzianum. Two patterns of regeneration were observed. First, the hyphae arose directly from the regenerated protoplast mother cell. Second, a chain of bud cells developed from the protoplast and subsequently generating hyphae generally protruded from the terminal bud cells.     

<Emphasis Type="Italic">In vitro</Emphasis> biocontrol analysis of <Emphasis Type="Italic">Alternaria alternata</Emphasis> (Fr.) Keissler under different environmental conditions

The species Trichoderma harzianum was analyzed as possible biocontrol agent of Alternaria alternata under different environmental conditions (water activity and temperature). The strains were analyzed macroscopically to obtain the Index of Dominance. The analysis was completed using two microscopic techniques. T. harzianum showed dominance on contact over A. alternata at all testing temperatures and water activities tested except at 0.95 a _w and 15 °C, at which T. harzianum inhibited A. alternata at a distance. Biocontrol was governed by different mechanisms such as competition for space and nutrients, mycoparasitism, and possible antibiosis. Temperature and water activity significantly influenced fungal growth rate.     

Mycolytic effect of extracellular enzymes of antagonistic microbes to Colletotrichum falcatum,red rot pathogen of sugarcane

Strains of selected bacteria and Trichoderma harzianum isolated from sugarcane rhizosphere and endosphere regions were tested for the production of chitinolytic enzymes and their involvement in the suppression of Colletotrichum falcatum, red rot pathogen of sugarcane. Among several strains tested for chitinolytic activity, 12 strains showed a clearing zone on chitin-amended agar medium. Among these, bacterial strains AFG2, AFG 4, AFG 10, FP7 and VPT4 and all the tested T. harzianum strains produced clearing zones of a size larger than 10 mm. The antifungal activity of these strains increased when chitin was incorporated into the medium. Trichoderma harzianum strain T5 showed increased levels of activity of N-acetylglucosaminidase and -1,3-glucanase when grown on minimal medium containing chitin or cell wall of the pathogen. Lytic enzymes of bacterial strains AFG2, AFG4, VPT4 and FP7 and T. harzianum T5 inhibited conidial germination and mycelial growth of the pathogen. Enzymes from T. harzianum T5 were found to be the most effective in inhibiting the fungus. When mycelial discs of the pathogen were treated with the enzymes, electrolytes were released from fungal mycelia. The results indicated that antagonistic T. harzianum T5 caused a higher level of lysis of the pathogen mycelium, and the inhibitory effect was more pronounced when the lytic enzymes were produced using chitin or cell wall of the pathogen as carbon source.     

Production of β-Xylosidase Activity by Trichodermaharzianum Strains

Nine Trichoderma harzianum strains were screened for β-xylosidase activity when grown in solid-state cultures on media containing wheat bran as the carbon source. All strains produced β-xylosidase activity, the most active being in extracts of cultures of T. harzianum strain 4. A β-xylosidase was purified by ammonium sulfate precipitation, ultrafiltration, gel filtration, and ion exchange chromatography from solid-state cultures of T. harzianum strain C. Enzyme preparations yielded a single band when stained for protein following eletrophoresis. The molecular weight value, calculated following SDS-PAGE, was determined to be 60 kDa. β-Xylosidase was most active at pH 4.0–4.5 and 70°C. This enzyme had a K _m value of 0.053 mM. The phenol-sulfuric acid method detected the presence of a small amount of carbohydrate in the purified enzyme preparation. β-Xylosidase was active against some p-nitrophenylglycosides. The enzyme was inactive against xylan and PNPG. β-xylosidase activity was inhibited by xylose and SDS. Iodoacetamide, dithiothreitol, gluconolactone, glucose, and mercuric chloride failed to inactivate this enzyme's activity. A synergistic effect was observed when β-xylosidase from T. harzianum strain C and β-xylanase from Aspergillus fumigatus were incubated with pretreated arabinoxylan. Received: 1 December 1995 / Accepted: 11 December 1995     

Production of protoplasts from the fungi Curvularia inaequalis and Trichoderma reesei

Summary Protoplast formation in Curvularia inaequalis was achieved using non-commercial and commercial snail gut enzymes or Trichoderma harzianum enzymes. The cells were grown for enzyme treatment on cellophane sheets or in liquid cultures for varying periods of time. The production of T. harzianum enzymes is discussed. The highest protoplast yields were 2.6x10⁷ protoplasts/ml enzyme solution. Protoplasts were shown to have zero to four nuclei. Protoplast regeneration was succesfully carried out in semisolid agar.     

Production and preliminary characterization of RNA-depolymerase from Trichoderma harzianum

Trichoderma harzianum produced RNA-depolymerase with maximum activity after 72 to 120 h of growth. Addition of K₂HPO₄ repressed enzyme production by the fungus. The optimal activity was at pH 7.8 and 40 to 50°C. The enzyme was stable at pH 3.2 to 9.0 and 80% of activity remained after 60 min at 40°C. EDTA and p-chloromercuribenzoate had no effect on the enzyme activity.E.S. Vasileva-Tonkova is with the Institute of Microbiology, Bulgarian Academy of Sciences, Acad, G. Bonchev str., B1. 26, 1113 Sofia, Bulgaria     

Purification and characterization of recombinant endoglucanase of Trichoderma reesei expressed in Saccharomyces cerevisiae with higher glycosylation and stability

Cel5A (endoglucanase II) of Trichoderma reesei was expressed in Saccharomyces cerevisiae then purified. Two components (C1 and C2) of recombinant Cel5A with different glycosylation were obtained. Purified C1 had a larger molecular mass (57 kDa) than that of the native Cel5A produced by T. reesei (48 kDa) due to the different extents of asparagines-linked glycosylation. There was no significant difference in enzymatic activity between the C1 and the native Cel5A from T. reesei. C1 treated with Endoglycosidase H had a molecular mass of 54 kDa and retained about 88% of its original activity. Unpurified C2 was larger form of hyperglycosylation proteins. Its molecular mass was larger than 85 kDa till up to 200 kDa. It still retained activity regardless of its magnitude molecular mass. With increased glycosylation extent of the enzyme components (C2 >C1 >native Cel5A), the pH range of activity become wider, and thermal stability become higher.     

The O-glycosylated linker from the Trichoderma reesei Family 7 cellulase is a flexible, disordered protein

Fungi and bacteria secrete glycoprotein cocktails to deconstruct cellulose. Cellulose-degrading enzymes (cellulases) are often modular, with catalytic domains for cellulose hydrolysis and carbohydrate-binding modules connected by linkers rich in serine and threonine with O-glycosylation. Few studies have probed the role that the linker and O-glycans play in catalysis. Since different expression and growth conditions produce different glycosylation patterns that affect enzyme activity, the structure-function relationships that glycosylation imparts to linkers are relevant for understanding cellulase mechanisms. Here, the linker of the Trichoderma reesei Family 7 cellobiohydrolase (Cel7A) is examined by simulation. Our results suggest that the Cel7A linker is an intrinsically disordered protein with and without glycosylation. Contrary to the predominant view, the O-glycosylation does not change the stiffness of the linker, as measured by the relative fluctuations in the end-to-end distance; rather, it provides a 16 Å extension, thus expanding the operating range of Cel7A. We explain observations from previous biochemical experiments in the light of results obtained here, and compare the Cel7A linker with linkers from other cellulases with sequence-based tools to predict disorder. This preliminary screen indicates that linkers from Family 7 enzymes from other genera and other cellulases within T. reesei may not be as disordered, warranting further study.     

Cellulases of Penicillium verruculosum

Nine major cellulolytic enzymes were isolated from a culture broth of a mutant strain of the fungus Penicillium verruculosum: five endo-1, 4-β-glucanases (EGs) having molecular masses 25, 33, 39, 52, and 70 kDa, and four cellobiohydrolases (CBHs: 50, 55, 60, and 66 kDa). Based on amino acid similarities of short sequenced fragments and peptide mass fingerprinting, the isolated enzymes were preliminary classified into different families of glycoside hydrolases: Cel5A (EG IIa, 39 kDa), Cel5B (EG IIb, 33 kDa), Cel6A (CBH II, two forms: 50 and 60 kDa), Cel7A (CBH I: 55 and 66 kDa), Cel7B (EG I: 52 and 70 kDa). The 25 kDa enzyme was identical to the previously isolated Cel12A (EG III). The family assignment was further confirmed by the studies of the substrate specificity of the purified enzymes. High-molecular-weight forms of the Cel6A, Cel7A, and Cel7B were found to possess a cellulose-binding module (CBM), while the catalytically active low-molecular-weight forms of the enzymes, as well as other cellulases, lacked the CBM. Properties of the isolated enzymes, such as substrate specificity toward different polysaccharides and synthetic glycosides, effect of pH and temperature on the enzyme activity and stability, adsorption on Avicel cellulose and kinetics of its hydrolysis, were investigated.