Effects of different alleles of the E. coli K12 polA gene on the replication of non-transferring plasmids

Summary The effects of eight different polA ^-alleles on the replication of six different non-transferring enterobacterial plasmids have been tested. Using phage P1CM transduction, different allelic polA ^- mutations were introduced into E. coli K12 strains carrying one of several antibiotic resistance plasmids. Plasmid stability in the transductants was examined by testing clones for drug resistance after growth under various conditions. From the results, the R factors may be divided into three different classes. One plasmid is only affected by PolA^- conditions which inhibit host cell growth, three plasmids (from the same compatibility group) are unstable under conditions in which the cells are severely deficient in DNA polymerase I and two other plasmids (compatible with each other and with the other four) are immediately lost from such transductants and are unstable in a number of others. Furthermore, the plasmids which are most dependent on DNA polymerase I have been shown to replicate in the presence of chloramphenicol and therefore typify a class of plasmids which includes bacteriocinogenic factors such as ColE1 and CloDF13, resistance determinant RSF1030 and the E. coli 15 minicircular plasmid.     

Plasmid rolling circle replication: identification of the RNA polymerase-directed primer RNA and requirement for DNA polymerase I for lagging strand synthesis.

Plasmid rolling circle replication involves generation of single-stranded DNA (ssDNA) intermediates. ssDNA released after leading strand synthesis is converted to a double-stranded form using solely host proteins. Most plasmids that replicate by the rolling circle mode contain palindromic sequences that act as the single strand origin, sso. We have investigated the host requirements for the functionality of one such sequence, ssoA, from the streptococcal plasmid pLS1. We used a new cell-free replication system from Streptococcus pneumoniae to investigate whether host DNA polymerase I was required for lagging strand synthesis. Extracts from DNA polymerase I-deficient cells failed to replicate, but this was corrected by adding purified DNA polymerase I. Efficient DNA synthesis from the pLS1-ssoA required the entire DNA polymerase I (polymerase and 5'-3' exonuclease activities). ssDNA containing the pLS1-ssoA was a substrate for specific RNA polymerase binding and a template for RNA polymerase-directed synthesis of a 20 nucleotide RNA primer. We constructed mutations in two highly conserved regions within the ssoA: a six nucleotide conserved sequence and the recombination site B. Our results show that the former seemed to function as a terminator for primer RNA synthesis, while the latter may be a binding site for RNA polymerase.     

Complementation of Bacillus subtilis polA mutants by DNA polymerase I from Streptococcus pneumoniae

Summary The polA gene of Streptococcus pneumoniae cloned in the recombinant plasmid pSM22 is expressed in Bacillus subtilis. Extracts of B. subtilis polA mutants containing pSM22 showed 6 times more DNA polymerase activity than extracts of wild-type cells without the plasmid. Complete complementation of the B. subtilis polA5 and polA59 mutations with respect to in vivo resistance to UV irradiation and methyl methanesulfonate was observed when four copies of the pneumococcal polA gene were present in each cell. Ectopic integration of the polA gene together with a cat marker into the chromosome of B. subtilis gave chromosomal insertions containing single and double doses of the pneumococcal polA gene. Correlation with gene dosage was observed for both chloramphenicol acetyltransferase and DNA polymerase activities measured in vitro. Depending on the number of copies of the S. pneumoniae polA gene present, restoration of DNA repair functions in polA mutants of B. subtilis was either partial or complete.     

Isolation of a DNA polymerase I (polA) mutant of Rhizobium leguminosarum that has significantly reduced levels of an IncQ-group plasmid

A population of Tn5 mutagenised Rhizobium leguminosarum cells was screened for mutants affected in protein secretion by introducing a plasmid carrying the Erwinia chrysanthemi prtB gene and screening for mutants defective in secretion of the protease PrtB. One such mutant (A301) also appeared to be defective in secretion of the R. leguminosarum nodulation protein NodO. Genetic analysis showed that the defect in A301 was caused by the Tn5 insertion. However the DNA sequence adjacent to the site of Tn5 insertion had significant homology to the Escherichia coli polA gene, which encodes DNA polymerase I. The mutant A301 showed increased sensitivity to ultraviolet light, a characteristic of polA mutants of E. coli. The apparent defect in secretion by A301 was due to a large decrease in the copy number of the IncQ group replicon on which prtB and nodO were cloned and this decreased the total amounts of PrtB or NodO protein synthesised and secreted by the polA mutant. The polA mutant had a lower growth rate than the parent strain on both rich and minimal media, but there was no obvious effect of the polA mutation on the symbiosis of R. leguminosarum bv. viciae with pea.     

Genetic analysis of the inter-relationship between plasmid replication and incompatibility

Summary The relationship between replication control and plasmid incompatibility has been investigated using a composite replicon, pPM1, which consists of the pSC101 plasmid ligated to another small multicopy plasmid, RSF1050. Since pPM1 can utilise the replication system of either of the two functionally distinct components, propagation of the composite plasmid can occur in the presence of a mutation of one of its moieties. Such mutants are detected by their inability to rescue the composite plasmid under conditions not permissive for replication of the other moiety. Mutations in incompatibility functions can be detected by the failure of the composite replicon to exclude co-existing plasmids carrying a replication system identical to the one on pPM1.The inability of the composite plasmid to replicate at 42° in a host synthesizing temperature-sensitive DNA polymerase I, which is required by the RSF1050 replication system, was used to isolate pPM1 mutants defective in replication of the pSC101 component. Mutants defective in the incompatibility functions of pSC101 were obtained by selecting derivatives that allow the stable coexistence of a second pSC101 replicon in the same cell. Analysis of these two classes of mutants indicates that plasmids selected for defective pSC101 replication ability nevertheless retain pSC101 incompatibility. In contrast, plasmid mutants that have lost incompatibility functions were found always to be defective in replication ability.     

Direction of transcription affects the replication mode of lambda in an in vitro system

Summary pMV158 is a 5.4 kb broad host range multicopy plasmid specifying tetracycline resistance. This plasmid and two of its derivatives, pLS1 and pLS5, are stably mantained and express their genetic information in gram-positive and gram-negative hosts. The in vitro replication of plasmid pMV158 and its derivatives was studied in extracts prepared from plasmid-free Escherichia coli cells and the replicative characteristics of the streptococcal plasmids were compared to those of the E. coli replicons, ColE1 and the mini-R1 derivative pKN182. The optimal replicative activity of the E. coli extracts was found at a cellular phase of growth that corresponded to 2 g wet weight of cells per litre. Maximal synthesis of streptococcal plasmid DNA occurred after 90 min of incubation and at a temperature of 30° C. The optimal concentration of template DNA was 40 g/ml. Higher plasmid DNA concentrations resulted in a decrease in the incorporation of dTMP, indicating that competition of specific replication factor(s) for functional plasmid origins may occur. In vitro replication of plasmid pMV158 and its serivatives required the host RNA polymerase and de novo protein synthesis. The final products of the streptococcal plasmid DNAs replicated in the E. coli in vitro system were monomeric supercoiled DNA forms that had completed at least one round of replication, although a set of putative replicative intermediates could also be found. The results suggest that a specific plasmid-encoded factor is needed for the replication of the streptococcal plasmids.     

Isolation and characterization of pLS 1 plasmid mutants with increased copy numbers

Abstract Streptococcus pneumoniae genetic systems designed for isolation of plasmid mutants with copy-up phenotypes have been developed. The target plasmids have the pLS1 replicon, and two different strategies have been followed: (i) selection of clones exhibiting augmented resistance to antibiotics, or (ii) obligatory co-existence of incompatible plasmids. We have isolated 23 plasmid mutants exhibiting increased number of copies. All the mutations corresponded to four different alleles of the copG gene of plasmid pLS1. These strategies could be used with other plasmids.     

Lagging-Strand Replication from the ssoA Origin of Plasmid pMV158 in Streptococcus pneumoniae: In Vivo and In Vitro Influences of Mutations in Two Conserved ssoA Regions

The streptococcal plasmid pMV158 replicates by the rolling-circle mechanism. One feature of this replication mechanism is the generation of single-stranded DNA intermediates which are converted to double-stranded molecules. Lagging-strand synthesis initiates from the plasmid single-stranded origin, sso. We have used the pMV158-derivative plasmid pLS1 (containing the ssoA type of lagging-strand origin) and a set of pLS1 derivatives with mutations in two conserved regions of the ssoA (the recombination site B [RS_B] and a conserved 6-nucleotide sequence [CS-6]) to identify sequences important for plasmid lagging-strand replication in Streptococcus pneumoniae. Cells containing plasmids with mutations in the RS_B accumulated 30-fold more single-stranded DNA than cells containing plasmids with mutations in the CS-6 sequence. Specificity of lagging-strand synthesis was tested by the development of a new in vitro replication system with pneumococcal cell extracts. Four major initiation sites of lagging-strand DNA synthesis were observed. The specificity of initiation was maintained in plasmids with mutations in the CS-6 region. Mutations in the RS_B region, on the other hand, resulted in the loss of specific initiation of lagging-strand synthesis and also severely reduced the efficiency of replication.     

Interspecific plasmid transfer between Streptococcus pneumoniae and Bacillus subtilis

Summary The streptococcal plasmids pMV158 and pLS1, grown in Streptococcus pneumoniae, were transferred to Bacillus subtilis by DNA-mediated transformation. The plasmids were unchanged in the new host; no deletions were observed in 80 instances of transfer. Their copy number was similar to that in S. pneumoniae. Two B. subtilis plasmids, pUB110 and pBD6, could not be transferred to S. pneumoniae. Hybrid plasmids were produced by recombining the EcoRI fragment of pBD6 that confers Km^r with EcoRI-cut pLS1, which confers Tc^r. The simple hybrid, pMP2, was transferable to both species and expressed Tc^r and Km^r in both. A derivative, pMP5, which contained an insertion in the pBD6 component, expressed a higher level of kanomycin resistance and was more easily selected in S. pneumoniae. Another derivative, pMP3, which contained an additional EcoRI fragment, presumably of pneumococcal chromosomal DNA, could not be transferred to B. subtilis. Previous findings that monomeric plasmid forms could transform S. pneumoniae but not B. subtilis were confirmed using single plasmid preparations. Although plasmids extracted from either species were readily transferred to S. pneumoniae, successive passage in B. subtilis increased the ability of plasmid extracts to transfer the plasmid to a B. subtilis recipient. This adaptation was tentatively ascribed to an enrichment of multimeric forms in extracts of B. subtilis as compared to S. pneumoniae. A review of host ranges exhibited by plasmids of Gram-positive bacteria suggested differences in their ability to use particular host replication functions. The pMP5 plasmid, with readily selectable Km^r and Tc^r markers in both hosts, and with the potential for inactivation of Km^r by insertion in the Bg/II site, could be a useful shuttle vector for cloning in S. pneumoniae and B. subtilis.     

Segregational stability and copy number of the theta-type lactococcal replicon Rep22 in Lactococcus

Rep22 is the replication region of the lactococcal theta replicating pUCL22 plasmid. The copy number of Rep22-based plasmids in Lactococcus was determined by using a chromosomal DNA fragment from Lactococcus lactis subsp. lactis MMS368 as reference. Segregational behavior appeared to be linked to copy number and therefore indicated random distribution of copies to daughter cells. Nevertheless, an active partitioning system was detected in the parental plasmid pUCL22. A pUCL22 138-bp DNA restriction fragment bearing a perfect 18-bp inverted repeat was involved in the improvement of Rep22-based plasmid segregational stability during discontinuous exponential growth.     

Establishment of Escherichia coli cells with an integrated high copy number plasmid

Summary The dnaA46 cells can grow at high temperature when a high copy number plasmid pKY31, a derivative of pBR322 carrying a segment of the E. coli chromosome, integrates into the bacterial chromosome. In contrast, the dnaA46 polA ^- cells with the integrated plasmid can not grow at high temperature. Therefore, integration of the plasmid can suppress the dnaA mutation and this suppression requires DNA polymerase I which has been known to be required for plasmid replication. Full reversion of polA or lysogenization of polA ⁺ is lethal for the dnaA46polA ^- bacteria that carry the plasmid only in integrated state. Partial reversion of polA allows these cells to grow at both low and high temperatures. Introduction of the plasmid pBR322 into cytoplasm of these bacteria suppresses the lethal effect caused by full reversion of polA or lysogenization of polA ⁺. This lethal effect expresses independent of the presence or absence of the dnaA mutation. In partial revertants of polA which have only integrated plasmid, the number of copies of a region near the replication origin of integrated plasmid increases. The number is reduced by the presence of extrachromosomal pBR322. It is suggested that the lethal effect of normal levels of DNA polymerase I in strains that carry only the integrated plasmid is due to excessive initiation of replication of the bacterial chromosome from the plasmid origin and high potential of initiation can be absorbed in many copies of cytoplasmic plasmid, probably, in their replication origins.Abbreviations Amp^r ampicillin resistant (resistance) - Tet^s tetracycline sensitive - Tet^r tetracycline resistant - MMS^r methyl methane sulfonate resistant (resistance) - ts temperature sensitive - Kb kilobase pairs     

Nonintegrated plasmid-folded chromosome complexes: genetic studies on formation and possible relationship to plasmid replication.

When folded chromosomes are purified from plasmid-containing bacteria, a reproducible fraction of the host's covalently closed, circular (CCC) plasmid DNA copurifies with the chromosomes. From this copurification, we infer the existence of nonintegrative plasmid-chromosome (NPC) complexes. Previously, we noted that plasmids dependent on DNA polymerase III and with stringent control of replication complex to a greater extent than plasmids dependent on DNA polymerase I and with relaxed control of replication. We have examined this subject in more depth and find that: (i) The composite plasmids formed by in vitro recombination of a “stringent” with a “relaxed” replicon complex to chromosomes at the frequency of the component replicon which directs replication; (ii) all of the detectable replicative intermediates, but only 25% of the CCC forms, of plasmid ColE1 complex to chromosome; and (iii) when a mini-F plasmid is deleted for the DNA sequences which include the primary origin of replication, the complexing frequency decreases 30 to 40%. We conclude from these findings that NPC complexes either indirectly or directly relate to plasmid replication. Further, we find that the EcoRI kan⁺ fragments of pML31 and the ampicillin resistance transposon, Tn3, promote complexing of both ColE1 and mini-F plasmids to host chromosomes. The biological significance of this latter complexing is unknown. However, we conclude from these studies and from point (iii) that complexing is determined in part by unique plasmid sequences.     

Replication of the promiscuous plasmid pLSI: a region encompassing the minus origin of replication is associated with stable plasmid inheritance

Deletion of a region of the promiscuous plasmid pLS1 encompassing the initiation signals for the synthesis of the plasmid lagging strand led to plasmid instability in Streptococcus pneumoniae and Bacillus subtilis. This defect could not be alleviated by increasing the number of copies (measured as double-stranded plasmid DNA) to levels similar to those of the wild-type plasmid pLS1. Our results indicate that in the vicinity of, or associated with the single-stranded origin region of pLS1 there is a plasmid component involved in its stable inheritance. Homology was found between the DNA gyrase binding site within the par region of plasmid pSC101 and the pLS1 specific recombination site RS_R.     

In vivo definition of the functional origin of leading strand replication on the lactococcal plasmid pFX2

The lactococcal plasmid pFX2 belongs to a family of plasmids, whose prototype is the streptococcal plasmid pMV158, that replicates by the rolling circle mechanism. Determination of the nucleotide sequence of the repX gene of pFX2 allowed us to make some minor corrections in the published sequence, and to show that the repX gene is identical to the rep gene of plasmid pWV01. We have established pFX2 in Escherichia coli and in Streptococcus pneumoniae. In the latter host, we have defined in vivo the nick site introduced by the RepX protein. Plasmid pFX2 and the pMV158 derivative pLS1 exhibit a moderate degree of incompatibility in S. pneumoniae. Cloning of the double strand origin (dso) of pFX2 into a high-copy-number plasmid that is compatible with the pMV158 replicon led to an increase in incompatibility toward pLS1. Plasmids pFX2 and pLS1 exhibit homologies in their Rep proteins and in their dso sequences, but not in their negative control elements. Thus, the observed incompatibility indicates that cross-recognition of Rep proteins and dso takes place. Received: 25 May 1998 / Accepted: 8 July 1998     

A new class of mutants in DNA polymerase I that affects gene transposition

A mutant of Escherichia coli strain K12 is defective in transposition of both the transposons Tn5 and Tn10 and the insertion sequences IS1 and IS5. In addition to the defect in transposition, the mutant is also sensitive to methylmethane sulfonate and ultraviolet light, does not grow phage lambda red and is missing the polymerizing activity and the 5′?3′ exonuclease activity of DNA polymerase I, indicating that the mutation is in the structural gene for this enzyme. We have designated the mutant allele as polA34. All of the properties associated with this mutant cotransduce with a marker known to be linked to polA. Furthermore, revertants of the mutant to methylmethane sulfonate resistance also regain the normal transposition frequencies of Tn5, IS1 and IS5. Complementation tests using the diploid polA34/polA show that the sensitivity to methylmethane sulfonate, and the defect in transposition is recessive to the wild-type. Some revertants of polA34 (called polA34 spa) restore resistance to methylmethane sulfonate and u.v. and partially restore the polymerase and 5′?3′ exonuclease activity but do not restore transposition. Thus we conclude that neither the polymerase activity nor the 5′?3′ exonuclease activity are required in transposition, but rather some other property of DNA polymerase I is needed.