Purification and Characterization of Lipase from Wheat (Triticum aestivum L.) Germ

A method of isolation and purification of lipase (EC 3.1.1.3) from the germ of wheat (Triticum aestivumL.) is described. An electrophoretically homogeneous preparation of the enzyme (specific activity, 622.5 × 10^–3 mol/min per mg protein) was obtained after 61-fold purification. The molecular weight of the enzyme, determined by gel chromatography, was 143 ± 2 kDa. The optimal conditions for the enzyme were 37°C and pH 8.0. The homogeneous preparation of the lipase exhibited high thermal stability: over 20% of the original activity was retained after incubation of the preparation at high temperatures (60–90°C) for 1 h at pH 8.0.     

A protoplast to plant system in roses

High yields of protoplasts were isolated from embryogenic suspension cultures of Rosa persica x xanthina and Rosa wichuraiana using an enzyme mixture comprising 20 g l^-1 cellulase Onozuka R10, 1 g l^-1 Pectolyase Y-23 and 10 g l^-1 hemicellulase. Agarose-immobilized protoplasts gave the most consistent growth at a plating density of 5×10⁴ protoplasts ml^-1 on the basic medium of Kao & Michayluk (KM8p) containing 2 mg l^-1 naphthaleneacetic acid and 1 mg l^-1 benzylaminopurine. At 25°C in the dark, 0.004% of R. persica x xanthina protoplasts developed into colonies. Using similar culture conditions, but with a plating density of 9×10⁴ protoplasts ml^-1, 0.017% of R. wichuraiana protoplasts developed into colonies. On transfer of R. persica x xanthina colonies to Schenk & Hildebrandt's medium containing 3 mg l^-1 2,4-dichlorophenoxyacetic acid, globular and later stage embryos were formed. Approximately 30% of these embryos developed into plantlets on transfer to basal Schenk & Hildebrandt's medium. Further development of the plantlets took place on cellulose plugs (Sorbarods) soaked in Murashige & Skoog's medium containing 0.05 mg l^-1 naphthaleneacetic acid, 0.05 mg l^-1 indole-3-butyric acid and 0.1 mg l^-1 benzylaminopurine. Rose breeding is now open to the full range of in vitro genetic manipulation techniques involving protoplast technology.     

Cost-effective production of cellulose hydrolysing enzymes from <Emphasis Type="Italic">Trichoderma</Emphasis> sp. RCK65 under SSF and its evaluation in saccharification of cellulosic substrates

Trichoderma sp. is a potential cellulase producing mesophilic fungi which grow under mild acidic condition. In this study, growth and nutritional conditions were manipulated for the maximum and cost-effective production of cellulase using lab strain Trichoderma sp. RCK65 and checked for its efficiency in hydrolysis of Prosopis juliflora (a woody substrate). Preliminary studies suggested that when 48 h old secondary fungal culture (20 % v/w) was inoculated in wheat bran moistened with mineral salt solution (pH 4.5 and 1:3 solid to moisture ratio), incubated at 30 °C and after 72 h, it produced maximum cellulase (CMCase 145 U/gds, FPase 38 U/gds and β-glucosidase 105 U/gds). However, using statistical approach a S:L ratio (1:1) was surprisingly found to be optimum that improved cellulase that is CMCase activity by 6.21 %, FPase activity by 23.68 % and β-glucosidase activity by 37.28 %. The estimated cost of crude enzyme (Rs. 5.311/1000 FPase units) seems to be economically feasible which may be due to high enzyme titre, less cultivation time and low media cost. Moreover, when the crude enzyme was used to saccharify pretreated Prosopis juliflora (a woody substrate), it resulted up to 83 % (w/w) saccharification.     

Progress in leaf protoplast isolation and culture from virus-free axenic shoot cultures of Vitis vinifera L.

Axenic shoot cultures of virus-free Vitis vinifera L. cv. Soultanina were a highly efficient source for isolation of viable protoplasts. Optimum results were obtained with leaves of 50–100 mg fresh weight, leaf discs of 0.7 cm in diameter, 100 and 15 U ml^-1 Cellulase R-10 and Macerozyme R-10, respectively, and 18 h reaction time in either light or in darkness. Protoplast yield was approx. 25×10⁶ viable protoplasts per g fresh weight and their size ranged from 12 to 44 m. During a 20-day culture period, the maximum survival rate obtained was approx. 40%. A plating density of 10×10⁵ protoplasts per ml resulted in increased survival rates. Various growth regulators and glutamine did not significantly improve survival rates of protoplasts, whereas extract from coconut added to the culture medium caused an increase in the survival rates of protoplasts. Cell elongation at a significant rate and divisions were observed. [¹⁴C]glucose uptake was studied as an index of cell membrane integrity and functioning. Uptake rate of glucose by protoplasts was linear for up to 60 min, fully inhibited by NaN₃, with an optimum pH of 4.8. Protoplasts 24 h old exhibited significantly lower rates of glucose uptake.     

Optimization of different factors for efficient protoplast release from entomopathogenic fungus<Emphasis Type="Italic">Metarhizium anisopliae</Emphasis>

Optimization of different factors for efficient protoplast release fromMetarhizium anisopliae was investigated. Factors like culture media, age of the mycelium, incubation time, different enzymatic combinations and osmotic stabilizer were studied. Mycelium harvested at 40^th h in Sabouraud Dextrose broth showed the best protoplast yield over the other media and age of mycelium tested. An incubation time of 3 h and Lysing enzyme at a concentration of 10 mg/ml was the best among the different enzymatic concentrations and combinations tested and yielded a protoplast release of 7.3×10⁸ protoplasts/ml. The most suitable osmotic stabilizer for efficient protoplast release was 0.7M KCl.     

Lytic Enzymes of Trichoderma and Their Role in Plant Defense from Fungal Diseases: A Review

Lytic enzymes of mycoparasitic fungi of the genus Trichoderma, capable of suppressing a number of fungal phytopathogens that originate in air or soil, are reviewed. The topics analyzed include (1) regulation of production of chitinases, -1,3-glucanases, and proteases; (2) molecular and catalytic properties of purified enzymes; and (3) their in vitro ability to degrade cell walls and inhibit spore germination or germ-tube elongation in various phytopathogenic fungi. Among the results summarized are reports of cloning and expression of genes coding for certain lytic enzymes of Trichoderma spp. These genes are used for obtaining plant transgenes with increased resistance to fungal diseases and Trichoderma transformants that produce higher levels of one lytic enzyme (a chitinase or protease) and thereby exhibit a more pronounced ability to suppress phytopathogenic fungi.     

A rapid assay for genetic complementation of nitrate reductase deficiency via bulk protoplast fusion

Summary Genetic complementation of different nitrate reductase-deficient (NR^-) Nicotiana plumbaginifolia cell lines could be recognized in the described fusion disc technique as early as 5–10 days after protoplast fusion. Protoplasts of previously characterized mutant cell lines, belonging to four different complementation groups, were mixed in pairwise combinations and fused by the drop-wise fusion technique at very high protoplast densities (10⁶ protoplasts in an 8–10 mm spot) which resulted in the formation of a fusion disc on the bottom of the petri dish. After 5–10 days of incubation in K3 medium the restoration of NR activity could be detected directly in the original culture by the in vivo NR assay. Such a rapid test giving information about the genetic complementation of different auxotrophic cell lines has not previously been published for plants.     

Improved conditions for protoplast formation and transformation of Pleurotus ostreatus

Conditions suitable for the production and regeneration of Pleurotus ostreatus protoplasts from dikaryotic mycelia were examined. Three commercially available muralytic enzymes, including Sigma lysing enzyme, Novozym 234 and Novozym 234 LP, were used for production of protoplasts. Over 2 × 10⁷ protoplasts per gram fresh weight mycelia were obtained within 1.5 h by using each of these three enzymes. The colony regeneration rate was up to 13% on potato-dextrose-agar medium containing 0.8 m mannitol. Genetic transformation was based on positive selection for resistance to hygromycin B (HmB) using the plasmid vector pAN7-1 and accomplished by either electroporation or a polyethylene glycol (PEG)-divalent cation method. P. ostreatus strains used in this study have innate sensitivity to HmB at a critical inhibitory concentration of between 40–50 g/ml. Selection for HmB resistance of this fungus, indicative of transformation, resulted in 3–48 HmB-resistant colonies per microgram of pAN7-1 per 10⁷ viable protoplasts. No significant differences were apparent when either transformation protocol or either P. ostreatus strain was used. The best electrical condition found for the electrotransformation of P. ostreatus is at a field strength of 2.6–2.8 kV/cm with a capacitance of 25F and a parallel resistance of 800 ohms, corresponding to a time constant range of 10–14 ms. Correspondence to: P. A. Lemke     

Wheat protoplast culture: embryogenic colony formation from protoplasts

Wheat (Triticum aestivum L. cv Chinese Spring) protoplasts were isolated from immature embryos or embryogenic calli (3–4 weeks of culture on MS medium with 32 mg/1 dicamba) and cultured in R2 medium containing 2 mg/1 2,4-D by the nurse culture methods originally developed for rice protoplasts (Kyozuka et al. 1987). Protoplasts isolated from embryogenic calli started to divide within 3–5 days and formed colonies at frequencies up to 2% after 3–4 weeks of culture, while protoplasts isolated from immature embryos formed colonies at much lower frequency (less than 0.1%). Some of these colonies were embryogenic, and they appeared at a frequency of approximately 0.5% of colonies formed when callus-derived protoplasts were used. From two of those embryogenic colonies, calli were regenerated and albino shoots and roots were obtained.     

Cauliflower inflorescence protoplast culture and plant regeneration

A yield of 2–4×10⁶ protoplasts/g F.W. could be obtained when fresh cauliflower inflorescence segments were digested with 2% cellulase Onozuka R-10, 1% cellulase RS and 0.4% Macerozyme R-10 in CPW18S for 7 to 10 h. Purified protoplasts were cultured in K8p liquid and agarose medium. Although protoplasts in liquid medium divided earlier than in agarose, protoplast-derived cells in liquid culture could not avoid browning. With agarose culture, sustained division and callus formation could be achieved. After 20 days, calli were transferred onto B5 agar medium with ZT 1.5 mg l^-1, BA 0.5 mg l^-1 and IAA 0.1 mg l^-1 for shoot formation. The frequency of bud formation varied from 56.7% for calli of 1mm in size to 5.6% for 5mm calli. The shoots formed were rooted in B5 medium containing 0.5 mg l^-1 IBA, and the regenerated plants were transplanted to pots and grew normally. It took about two months from protoplasts to the regenerated plants.Abbreviations Ade adenine - BA 6-benzyl aminopurine - CH casein hydrolysate - CM coconut milk - 2,4-D 2,4,-dichlorophenoxyacetic acid - GA₃ gibberellic acid - Gln glutamine - NAA -naphthylacetic acid - IAA indole-3-acetic acid - IBA indole-3-butyric acid - ZT zeatin     

Penicillium ochrochloron MTCC 517 chitinase: An effective tool in commercial enzyme cocktail for production and regeneration of protoplasts from various fungi

Penicillium ochrochloron MTCC 517 is a potent producer of chitinolytic enzymes. Novozyme 234, traditional enzyme cocktail for protoplast generation is not available in the market. So, new enzyme cocktail is prepared for protoplast formation from various filamentous fungi which consists of 5 mg ml⁻¹ lysing enzymes from Trichoderma harzianum, 0.06 mg ml⁻¹ β-glucuronidase from Helix pomatia and 1 mg ml⁻¹P. ochrochloron chitinase. The greatest number of protoplasts could be produced from most of the fungi in 0.8 M sorbitol and by incubation for about 2 h at 37 °C, but the number was decreased by incubation for more than 3 h. About twice as many protoplasts were produced from different species of fungi by involvement of P. ochrochloron chitinase than with combined commercial enzymes.     

Partial Purification and Some Properties of Extracellular Asparaginase from Candida utilis

Extracellular asparaginase from Candida utilis was partially purified by precipitation with acetone and by column chromatography on DEAE Sephadex A-50 and Sephadex G-200. The specific activity of the enzyme preparation was 3900 units per mg of protein. Candida asparaginase characteristically had deaminating activity for d-asparagine as well as for l-asparagine. But this enzyme was not able to hydrolyzed l- or d-glutamine. SH inhibitor, chelating agents and metal ions did not show any inhibition or activation of l-asparaginase activity. Optimum pH was about 6 for both l- and d-asparagine. This asparaginase was stable between pH 4 and pH 10 in heating for 10 min at 50°C.     

Beauveria bassiana protoplast regeneration and transformation using electroporation

Summary Regeneration of Beauveria bassiana GK2016 protoplasts demonstrated three phases: (1) enlargement, (2) formation of a chain of budding cells, and (3) development of a true germ tube from the original protoplast. Regeneration frequencies of up to 80% were obtained when using the stabilizer ammonium sulphate. Using electroporation, protoplasts were transformed to methyl 1,2-benzimidazole carbamate (MBC) resistance with the Neurospora crassa MBC-resistant -tubulin gene. A transformation efficiency of one of three transformants per 5 g vector DNA was obtained. The MBC phenotype was stable and transformants grew in the presence of 5 g MBC/ml. Southern DNA-DNA hybridization analysis demonstrated that integration of the vector into the chromosomal DNA had occurred. Correspondence to: G. G. Khachatourians     

Autoclaved mycelium induces efficiently the production of hydrolytic enzymes for protoplast preparation of autologous fungus

The production of hydrolytic enzymes by the mutant Trichoderma reesei Rut-C30 when cultivated in the presence of various carbon sources: glucose, wheat bran and autoclaved mycelium of Penicillium occitanis CT1 has been studied. Glucose was shown to repress all studied hydrolases, 3% of either wheat bran or autoclaved cell walls led to high titers of enzymes, and were favorably comparable to commercial lysing enzymes (LE). The lysing enzyme cocktail obtained when T. reesei Rut-C30 was cultivated in the presence of autoclaved P. occitanis CT1 mycelia appeared to be a most effective for P. occitanis CT1 protoplast formation. Maximal yield of protoplasts reached 13 × 10⁶ protoplasts/mL while commercial LE preparation released only 4 × 10⁶ protoplasts/mL. The protoplast yield was affected also by the osmotic stabilizer, with KCl giving the best results. Our results suggest that to achieve the best protoplastization rate, the enzyme preparation should be obtained following induction by the autoclaved mycelium of the autologous fungus.     

Formation of giant protoplasts from protoplasts of Pleurotus cornucopiae by the cell wall lytic enzyme

Summary When purified protoplasts of Pleurotus cornucopiae IFO9614 were incubated with a mixture of cell wall lytic enzymes, they were found to increase their size. Their average diameter increased from 4.3 m to 31 m after 65 h incubation at 24° C. The presence of cellulase ONOZUKARS in the enzyme mixture had a significant effect on the formation of giant protoplasts. Regeneration frequency of giant protoplasts in a medium containing 0.5 M sucrose was 3.5%, approximately six times that of normal protoplasts.     

Influence of enzyme solution on protoplast culture and transient gene expression in maize (Zea mays L.)

The influence of two enzyme solutions, differing only in the presence or absence of Macerozyme, on protoplast yield, colony formation and transient GUS (-glucuronidase) activity was studied. For all parameters tested the presence of Macerozyme during protoplast isolation had a negative influence. Using an enzyme solution without Macerozyme suspension aggregates gave up to 4.4 times higher protoplast yield and plating efficiencies were increased up to 10-fold. Further, protoplasts isolated without macerozyme showed a 5.2-fold higher GUS activity in transient gene expression. Apart from the presence of Macerozyme, longer incubation (3 compared with 1.5 h) of cell aggregates in the enzyme solution also had a negative effect on transient transformation efficiency. These data demonstrate that protoplast isolation conditions have a profound effect on transient gene expression and it is proposed that these factors will also influence stable transformation efficiency.Abbreviations CP cellulase pectolyase - CPM cellulase pectolyase Macerozyme - 2,4-d 2,4-dichlorophenoxyacetic acid     

Studies of protoplast culture and plant regeneration from commercial and rapid-cyclingBrassica species

Protoplasts were isolated from aseptic shoot cultures of commercial cultivars ofBrassica napus, B. oleracea andB. campestris, and from the six rapid-cycling brassica species. Of the rapid-cycling species, onlyB. napus responded well to the culture conditions used; 2% of protoplasts formed calli and up to 5% of calli regenerated shoots. Regeneration was also achieved from commercial cultivars ofB. napus andB. oleracea. For these two species the plating density, time of dilution with fresh medium and the composition of the shoot-inducing medium were all found to have an important influence on the efficiency of plant regeneration. Both responded better to maltose than to sucrose-based media. Under the optimum conditionsB. napus showed a plating efficiency of 7.8% and shooting efficiency of 17%; forB. oleracea the figures were 2% and 56%, respectively.Abbreviations BAP 6-benzylaminopurine - NAA -naphthaleneacetic acid - 2,4-D 2,4-dichlorophenoxyacetic acid     

Kinetics of mycelial protoplast formation inGibberella fujikuroi andTrichoderma reesei

Mycelial protoplasts ofGibberella fujikuroi andTrichoderma reesei were prepared using Novozym 234 and linear relationship between the yield of the protoplasts and mycelial concentration up to 2 mg dry mass per mL was observed. The optima for concentration of the enzyme, the age of the culture and the contact time of the enzyme with mycelial cells were 2 g/L, 25h and 10 h, respectively, for both cultures. The frequency of reversion of the individual protoplasts was about 80%. The authors are thankful to Dr. A. Kama, Dr. K. Joseph, and Dr. N.G. Karanth for helpful suggestions and critical comments, and to Dr. B.L. Amla for constant encouragement. P.K.R. Kumar is grateful toCSIR, New Delhi, for the award of a research fellow-ship.     

Microcallus formation from maize protoplasts prepared from embryogenic callus

Conditions have been developed that induce maize (Zea mays L.) protoplasts to re-synthesize cell walls and to initiate cell divisions. Two types of embryogenic maize callus were used as a source of protoplasts: a heterogeneous callus (Type I) derived from immature embryos after three weeks in culture, and a friable, rapidly growing callus (Type II) selected from portions of the Type I callus. Many variables in the growth conditions of the donor tissue (type of medium, transfer schedule, age of callus), protoplast isolation solutions (pH, osmolarity, type and concentration of cell wall hydrolyzing enzymes, addition of polyamines) and conditions (amount of time in enzyme, amount of tissue per volume of enzyme incubation medium, agitation, preplasmolysis of source tissue, type of callus), and purification procedures (filtration and-or flotation), were found to affect both yield and viability of protoplasts (based upon fluorescein-diacetate staining). Our isolation procedure yielded high numbers of viable, uninucleated maize callus protoplasts which were densely cytoplasmic and varied in size from 20 to 50 m in diameter. Protoplasts plated in solid medium formed walls and divided several times. Of several gelling agents tested for protoplast propagation, only agarose resulted in protoplasts capable of sustained divisions leading to the formation of microcalli. Plating efficiency was established over a wide range of protoplast densities (10³–10⁷ protoplasts/ml). Highest plating efficiency (25%) was obtained at 1·10⁶ protoplasts/ml). The resulting microcalli grew to be dense clusters of about 0.1–0.5 mm in diameter and then stopped growing. Nurse cultures of maize and carrot (Daucus carota L.), were used to establish that individual protoplasts (not contaminating cells or cell clusters) formed walls and divided. Nurse cultures also increased the efficiency of microcallus formation from protoplasts.Abbreviations 2,4-D 2,4-dichlorophenoxyacetic acid - MS Murashige and Skoog (1962) salts - MS 1D Murashige and Skoog salts with 1 mg/l 2,4-D - MS 2D Murashige and Skoog salts with 2 mg/l 2,4-D - N₆ medium of Chu et al. (1975) - NN67-mod medium of Nitsch and Nitsch (1967) as modified in the present paper - FDA fluorescein diacetate - LMP low melting point     

Efficient protoplast isolation from fungi using commercial enzymes

Several commercial polysaccharases have been compared for their ability to liberate protoplasts from fungi. These enzymes were found to contain side activities capable of hydrolysing fungal cell walls. Protoplasts have been commonly isolated from fungi using enzyme systems prepared by workers in their own laboratories. However, these procedures are time consuming and considerable variation may be found between different batches of enzyme. The present study shows that high yields of protoplasts can be prepared from a variety of fungi using relatively cheap commercial enzymes. The yields obtained were normally as good as or better than those previously produced.