Aggregates Dramatically Alter Fibrin Ultrastructure

Among the many factors influencing fibrin formation and structure (concentration, temperature, composition, pH, etc.), it has been suggested that the polydispersity of fibrinogen may play an important role. We propose here a detailed investigation of the influence of this parameter on fibrin multiscale structure. Two commercial fibrinogen preparations were used, a monodisperse and a polydisperse one. First, the respective compositions of both fibrinogen preparations were thoroughly determined by measuring the fibrin-stabilizing factor; fibronectin; α, β, and γ intact chain contents; the γ/γ′ chains ratio; the N-glycosylation; and the post-translational modifications. Slight variations between the composition of the two fibrinogen preparations were found that are much smaller than the compositional variations necessary to alter significantly fibrin multiscale structure as observed in the literature. Conversely, multiangle laser light scattering-coupled size exclusion chromatography and dynamic light scattering measurements showed that the polydisperse preparation contains significant amounts of aggregates, whereas the other preparation is essentially monodisperse. The multiscale structure of the fibrins produced from those two fibrinogen preparations was determined by using x-ray scattering, spectrophotometry, and confocal microscopy. Results show that fibers made from the aggregate-free fibrinogen present a crystalline longitudinal and lateral structure and form a mikado-like network. The network produced from the aggregates containing fibrinogen looks to be partly built around bright spots that are attributed to the aggregate. The multiscale structure of mixtures between the two preparations shows a smooth evolution, demonstrating that the quantity of aggregates is a major determining factor for fibrin multiscale structure. Indeed, the effect of a few percent in the mass of aggregates is larger than any other effect because of compositional differences under the same reaction conditions. Finally, we propose a mechanistic interpretation of our results, which points at a direct role of the aggregates during polymerization, which disrupts the ideal ordering of monomers inside fibrin protofibrils and fibers.     

The molecular origins of the mechanical properties of fibrin

When normal blood circulation is compromised by damage to vessel walls, clots are formed at the site of injury. These clots prevent bleeding and support wound healing. To sustain such physiological functions, clots are remarkably extensible and elastic. Fibrin fibers provide the supporting framework of blood clots, and the properties of these fibers underlie the mechanical properties of clots. Recent studies, which examined individual fibrin fibers or cylindrical fibrin clots, have shown that the mechanical properties of fibrin depend on the mechanical properties of the individual fibrin monomers. Within the fibrin monomer, three structures could contribute to these properties: the coiled-coil connectors the folded globular nodules and the relatively unstructured αC regions. Experimental data suggest that each of these structures contributes. Here we review the recent work with a focus on the molecular origins of the remarkable biomechanical properties of fibrin clots.     

Structural Hierarchy Governs Fibrin Gel Mechanics

Fibrin gels are responsible for the mechanical strength of blood clots, which are among the most resilient protein materials in nature. Here we investigate the physical origin of this mechanical behavior by performing rheology measurements on reconstituted fibrin gels. We find that increasing levels of shear strain induce a succession of distinct elastic responses that reflect stretching processes on different length scales. We present a theoretical model that explains these observations in terms of the unique hierarchical architecture of the fibers. The fibers are bundles of semiflexible protofibrils that are loosely connected by flexible linker chains. This architecture makes the fibers 100-fold more flexible to bending than anticipated based on their large diameter. Moreover, in contrast with other biopolymers, fibrin fibers intrinsically stiffen when stretched. The resulting hierarchy of elastic regimes explains the incredible resilience of fibrin clots against large deformations.     

Lateral packing of protofibrils in fibrin fibers and fibrinogen polymers

The distinctive transverse banding pattern of fibrin fibers clearly indicates ordering of molecules in the longitudinal direction. In this study we examined the fibers of fibrin clots, as well as two types of fibrinogen polymers, by thin-section electron microscopy. The fibrinogen polymers have a transverse banding pattern identical to that of fibrin fibers—clearly indicating a regular longitudinal repeat—but they are larger in diameter, and show little or no branching. We therefore expected their overall ordering to be better than that of fibrin fibers. Several different fixation protocols were used. We readily observed the typical transverse banding seen previously by negative stain and metal replication techniques. However, only very rarely was any regular lateral lattice seen in any of the samples. X-ray diffraction was used to examine unfixed specimens of the two fibrinogen polymers and, once again, although a longitudinal repeat was evident, only rarely was evidence for lateral crystallinity seen. The electron-microscope and x-ray results showed that the needles and pellet fibers of fibrinogen have essentially the same internal architecture as thick fibrin fibers, and that all three types of polymer, although clearly transversely banded, have almost no crystallinity in their lateral protofibril packing.     

Multiple wavelength illumination in flow cytometry using a single arc lamp and a dispersing element

The principle of a multiple wavelength illumination method for flow cytometers, based upon a combination of a helium-neon laser and an arc lamp as illumination sources is described. By using a prism, the light from the arc lamp is dispersed and the different colors are imaged at different places on the sample stream. The small angle light scattering from the helium-neon laser light is measured as a relevant parameter and serves as a trigger signal for subsequent measurements of fluorescence or scattering of light from the arc lamp. Two experimental systems are described utilizing this principle: a system where the emission is detected orthogonally with respect to the direction of the illumination beams, and an epi-illumination system. With the orthogonal set-up multiple wave-length right angle scattering measurements are possible. This is illustrated by showing that the orthogonal scattering from erythrocytes is strongly dependent on the illumination wavelength. It is further shown that the apparatus is suitable for the measurement of intracellular pH using the pH dependence of the excitation spectrum of fluorescein. The epi-illumination system allows excitation of two (or more) fluorescent dyes with different excitation spectra. In this case the emission spectra of the fluorescent dyes may overlap substantially. This is shown by simultaneous measurement of DNA and protein of Chinese hamster lung cells using mitramycin and tetramethyl rhodamin isothiocyanate (TRITC).     

Visualization and mechanical manipulations of individual fibrin fibers suggest that fiber cross section has fractal dimension 1.3

We report protocols and techniques to image and mechanically manipulate individual fibrin fibers, which are key structural components of blood clots. Using atomic force microscopy-based lateral force manipulations we determined the rupture force, FR, f fibrin fibers as a function of their diameter, D, in ambient conditions. As expected, the rupture force increases with increasing diameter; however, somewhat unexpectedly, it increases as FR approximately D1.30+/-0.06. Moreover, using a combined atomic force microscopy-fluorescence microscopy instrument, we determined the light intensity, I, of single fibers, that were formed with fluorescently labeled fibrinogen, as a function of their diameter, D. Similar to the force data, we found that the light intensity, and thus the number of molecules per cross section, increases as I approximately D1.25+/-0.11. Based on these findings we propose that fibrin fibers are fractals for which the number of molecules per cross section increases as about D1.3. This implies that the molecule density varies as rhoD approximately D -0.7, i.e., thinner fibers are denser than thicker fibers. Such a model would be consistent with the observation that fibrin fibers consist of 70-80% water and only 20-30% protein, which also suggests that fibrin fibers are very porous.     

Protein interactions in undersaturated and supersaturated solutions: a study using light and x-ray scattering

Protein interactions in undersaturated and supersaturated solutions were investigated using static and dynamic light scattering and small angle x-ray scattering. A morphodrom of lysozyme crystals determined at 35 degrees C and pH = 4.6 was used as a guideline in selecting the protein and precipitant concentrations. The osmotic second virial coefficient, B(22), was determined by static and dynamic light scattering. At low ionic strengths for which no crystals were formed, B(22) was positive indicating repulsive interactions between the protein molecules. Negative B(22) at higher ionic strengths corresponds to attractive interactions where crystallization becomes possible. At two extreme salt concentrations, small angle x-ray scattering data were collected and fitted with a statistical mechanical model based on Derjaguin-Landau-Verwey-Overbeek potential using Random Phase Approximation. This model accounted well for the small angle x-ray scattering data at undersaturated condition with constant potential parameters. At very high salt concentration corresponding to supersaturated solution this model seems to fail, possibly due to the presence of non-Derjaguin-Landau-Verwey-Overbeek hydration repulsion between the molecules.     

Unraveling double stranded alpha-helical coiled coils: an x-ray diffraction study on hard alpha-keratin fibers

Transformations of proteins secondary and tertiary structures are generally studied in globular proteins in solution. In fibrous proteins, such as hard alpha-keratin, that contain long and well-defined double stranded alpha-helical coiled coil domains, such study can be directly done on the native fibrous tissue. In order to assess the structural behavior of the coiled coil domains under an axial mechanical stress, wide angle x-ray scattering and small angle x-ray scattering experiments have been carried out on stretched horse hair fibers at relative humidity around 30%. Our observations of the three major axial spacings as a function of the applied macroscopic strain have shown two rates. Up to 4% macroscopic strain the coiled coils were slightly distorted but retained their overall conformation. Above 4% the proportion of coiled coil domains progressively decreased. The main and new result of our study is the observation of the transition from alpha-helical coiled coils to disordered chains instead of the alpha-helical coiled coil to beta-sheet transition that occurs in wet fibers.     

Formation of fibrin gel in fibrinogen-thrombin system: static and dynamic light scattering study

The dynamics of thrombin-induced fibrin gel formation was investigated by means of static and dynamic light scattering. The decay time distribution function, obtained by the dynamic light scattering, clearly revealed a stepwise gelation process: the formation of fibrin and protofibril from fibrinogen followed by the lateral aggregation of protofibrils to form fibrin fibers and the formation of a three-dimensional network consisting of fibers. This conversion process was correlated with the angular dependence of the scattered light intensity (static light scattering). The correlation function of dynamic light scattering was analyzed in terms of sol-gel transition and gel structure. The correlation function showed a stretched exponential type behavior before the sol to gel transition point, and it showed a power law behavior at the gelation point.     

Evidence that αC region is origin of low modulus, high extensibility, and strain stiffening in fibrin fibers

Fibrin fibers form the structural scaffold of blood clots and perform the mechanical task of stemming blood flow. Several decades of investigation of fibrin fiber networks using macroscopic techniques have revealed remarkable mechanical properties. More recently, the microscopic origins of fibrin's mechanics have been probed through direct measurements on single fibrin fibers and individual fibrinogen molecules. Using a nanomanipulation system, we investigated the mechanical properties of individual fibrin fibers. The fibers were stretched with the atomic force microscope, and stress-versus-strain data was collected for fibers formed with and without ligation by the activated transglutaminase factor XIII (FXIIIa). We observed that ligation with FXIIIa nearly doubled the stiffness of the fibers. The stress-versus-strain behavior indicates that fibrin fibers exhibit properties similar to other elastomeric biopolymers. We propose a mechanical model that fits our observed force extension data, is consistent with the results of the ligation data, and suggests that the large observed extensibility in fibrin fibers is mediated by the natively unfolded regions of the molecule. Although some models attribute fibrin's force-versus-extension behavior to unfolding of structured regions within the monomer, our analysis argues that these models are inconsistent with the measured extensibility and elastic modulus.     

Fibrinogen Dusart: electron microscopy of molecules, fibers and clots, and viscoelastic properties of clots.

Ultrastructural perturbations resulting from defects in polymerization of fibrinogen Dusart, a congenital dysfibrinogenemia with the amino acid substitution A alpha 554 arginine to cysteine, were investigated by a variety of electron microscope studies. Polymerization of this mutant fibrinogen on addition of thrombin is impaired, producing clots with decreased porosity and increased resistance to fibrinolysis, resulting in thrombotic complications in the family members with this dysfibrinogenemia. Electron microscopy of rotary-shadowed individual molecules revealed that, in contrast to control fibrinogen, most of the alpha C domains of fibrinogen or fibrin Dusart appeared to be free-swimming appendages that do not exhibit intra- or intermolecular interactions either with each other or with the central domains. The location of albumin on the alpha C domains was demonstrated by electron microscopy using anti-albumin antibodies. Electron microscopy of negatively contrasted fibrin Dusart fibers indicated that they were less ordered than control fibers and had additional mass visible. Electron microscopy of freeze-dried, unidirectionally shadowed fibers showed that they were twisted with a shorter pitch. Scanning electron microscopy revealed that intact clots were made up of thin fibers with many branch points and very small pore sizes. The viscoelastic properties of Dusart fibrin clots measured with a torsion pendulum indicated a marked increase in stiffness consistent with the structural observations.     

Fibronectin alters the rate of formation and structure of the fibrin matrix

Plasma fibronectin is a vital component of the fibrin clot; however its role on clot structure is not clearly understood. The goal of this study was to examine the influence of fibronectin on the kinetics of formation, structural characteristics and composition of reconstituted fibrin clots or fibrin matrices. Fibrin matrices were formed by adding thrombin to 1, 2 or 4 mg/ml fibrinogen supplemented with 0–0.4 mg/ml fibronectin. The rate of fibrin matrix formation was then monitored by measuring light absorbance properties at different time points. Confocal microscopy of fluorescein conjugated fibrinogen was used to visualize the structural characteristics of fibrin matrices. The amount of fibronectin in fibrin matrices was determined through electrophoresis and immunoblotting of solubilized matrices. Fibronectin concentration positively correlated with the initial rate of fibrin matrix formation and with steady state light absorbance values of fibrin matrices. An increase in fibronectin concentration resulted in thinner and denser fibers in the fibrin matrices. Electrophoresis and immunoblotting showed that fibronectin was covalently and non-covalently bound to fibrin matrices and in the form of high molecular weight multimers. The formation of fibronectin multimers was attributed to cross-linking of fibronectin by trace amounts Factor XIIIa. These findings are novel because they link results from light absorbance studies to microcopy analyses and demonstrate an influence of fibronectin on fibrin matrix structural characteristics. This data is important in developing therapies that destabilize fibrin clots.     

Rheology of fibrin clots. IV. Darcy constants and fiber thickness.

Measurements of small oscillatory deformations of a fibrin clot by axial motion of a rod in a closed tube reveal an anomalous mechanical loss due to permeation of fluid through the clot structure. The Darcy constant for permeation can be calculated from data at the frequency where the apparent storage and loss shear moduli are equal, without the necessity of measurements at much lower frequencies as previously employed. From the Darcy constant, the average number of fibrin monomer units (v) per cross-section of a fibrous element of the clot can be calculated; it ranges from 4 to several hundred. In the range of fibrin concentration(c) from 3 to 14 milligrams, v is approximately proportional to c-2 for clots of coarse structure and to c-0.5 for clots of fine structure.     

Ultrastructure of clots during isometric contraction

We explored the retraction or contraction of platelet-fibrin clots under isometric conditions. In the presence of micromolar calcium clots of normal platelet-rich plasma developed tension at an initial rate of 0.1 to 0.2 g/min per cm2 (initial cross-sectional area). Electron microscopy of clots fixed after attaining a force of 1.6 g/cm2 revealed platelets with elongated bodies and pseudopods in close apposition to fibrin strands which were oriented in cablelike fashion in the direction of tension. The development of tension could not be explained simply on the basis of platelet-platelet association and interaction alone. First, factor XIII-dependent cross-linking of fibrin fibers was critical to normal isometric contraction. Second, tension decreased linearly, rather than exponentially, when the platelet count in the platelet-fibrin clot was decreased, suggesting that platelets must be interacting with another component (i.e. fibrin). Thrombasthenic platelets, deficient in fibrinogen receptors, failed to develop tension or to align fibrin strands or pseudopods in the clot. Platelet-fibrin clots treated with vincristine to disassemble microtubules or cytochalasin B to disrupt microfilaments failed to develop tension and relaxed if these agents were added after tension had developed. Relaxation under these conditions, however, was not associated with loss of orientation of fibrin strands. Our findings suggest that platelet-fibrin interaction in clots under isometric conditions leads to orientation of fibrin strands and platelets in the direction of force generation. Tension develops as platelets simultaneously attach to and spread along fibrin strands, and contract. The contraction draws some fibrin into platelet-fibrin clumps and aligns other strands in the long axis of tension. The achievement and maintenance of maximum tension appears to depend on the development of platelet-fibrin attachments and extension of platelet bodies and long pseudopods containing bundles of microfilaments and microtubules along the oriented fibrin fibers.     

Conformational Analysis of the Streptococcus pneumoniae Hyaluronate Lyase and Characterization of Its Hyaluronan-specific Carbohydrate-binding Module

For a subset of pathogenic microorganisms, including Streptococcus pneumoniae, the recognition and degradation of host hyaluronan contributes to bacterial spreading through the extracellular matrix and enhancing access to host cell surfaces. The hyaluronate lyase (Hyl) presented on the surface of S. pneumoniae performs this role. Using glycan microarray screening, affinity electrophoresis, and isothermal titration calorimetry we show that the N-terminal module of Hyl is a hyaluronan-specific carbohydrate-binding module (CBM) and the founding member of CBM family 70. The 1.2 Å resolution x-ray crystal structure of CBM70 revealed it to have a β-sandwich fold, similar to other CBMs. The electrostatic properties of the binding site, which was identified by site-directed mutagenesis, are distinct from other CBMs and complementary to its acidic ligand, hyaluronan. Dynamic light scattering and solution small angle x-ray scattering revealed the full-length Hyl protein to exist as a monomer/dimer mixture in solution. Through a detailed analysis of the small angle x-ray scattering data, we report the pseudoatomic solution structures of the monomer and dimer forms of the full-length multimodular Hyl.     

Concentration of protein in fibrin fibers and fibrinogen polymers determined by refractive index matching

We have used refractive index matching to determine the concentration of protein in the fibers in fibrin clots and of needlelike crystals of native fibrinogen. Our results are in agreement with those of Carr and Hermans [(1978) Macromolecules 11 , 46–50], as determined by light scattering—namely, that protein makes up about 20% of the volume of the fiber. However, we have found that the protein concentration is strongly dependent on ionic strength. An increase in ionic strength caused a substantial drop in the protein concentration. In a buffer containing 100 mM NaCl, the protein concentration was 26.6–29.8 g of protein per 100 cm³ of polymer, and at 200 mM NaCl it was reduced to 22.1–23.1 g/100 cm³.     

Effects of thrombospondin on fibrin polymerization and structure

Thrombospondin (TSP) is a trace protein in plasma but is released in high concentrations from alpha-granules of activated platelets during hemostasis. It binds to the platelet membrane and becomes incorporated into fibrin clots. A variety of approaches were taken to learn the effects of TSP on fibrin polymerization and structure. 125I-TSP and 125I-fibrinogen were used to study the effect of TSP concentration on the extent of TSP and fibrin incorporation. Turbidity at 600 nm was used to monitor the time course of polymerization. Wavelength dependence of the turbidity was used to calculate the mass to length ratio, fiber diameter, and fiber density of fibrin formed in the presence and absence of TSP. Morphologies of control and TSP-containing clots were examined by electron microscopy following critical point drying. The initial TSP concentration influenced the amount of TSP incorporated but did not alter the extent of fibrin polymerization. TSP, in a concentration-dependent manner, reduced the lag time to turbidity rise and caused formation of more numerous but thinner fibers. Except for their diameter, these fibers were identical to fibers of control fibrin in terms of density and morphology. It is proposed that TSP interacts with fibrin intermediates to accelerate fiber growth, perhaps by serving as a trifunctional branching unit during network formation. The properties of fibrin around aggregating platelets, therefore, may be influenced considerably by secreted TSP.     

Structure of cross-linked rabbit muscle phosphofructokinase in solution.

Cross-linked rabbit muscle phosphofructokinase in the active tetrameric and octameric state was studied in solution by hydrodynamic methods and small angle x-ray scattering techniques. The translational diffusion coefficients were determined by means of inelastic light scattering and were found to be 3.60 (+/- 0.02) x 10(-7) cm2 . s-1 for the tetramer and 2.54 (+/- 0.15) x 10(-7) cm2 . s-1 for the octamer. From small angle x-ray scattering measurements the radius of gyration, the specific inner surface area, and the volume were determined for both enzyme forms, revealing that the octameric cross-linked form is approximately spherical, with a diameter of 120.0 A, whereas the tetrameric form is asymmetric having an axial ratio of 2. By comparison of the scattering curves with triaxial geometric bodies which are equivalent in scattering, the tetrameric enzyme is described as a rectangular prism, with overall dimensions of A = 131.0 A, B = 131.0 A, and C = 65.0 A, and the octameric form as that of a cube with A = B = C = 120.0 A. The shape of the protomer, having a radius of gyration of 24.8 A, in the tetramer and octamer is similar to that for the native tetramer at pH 10 in the presence of 5 mM fructose 6-phosphate or 15 mM fructose 1,6-bis-phosphate. From the different shapes of the scattering curves of the native phosphofructokinase at pH 7.5 in the presence of 15 mM ATP and of the cross-linked tetramer or octamer, it can be inferred that the shapes of the protomers are different: in the presence of ATP the protomers are elongated, having an axial ratio of 1.8 to 2.0; the cross-linked state reveals a spherical protomer of radius 33.0 A, similar to that of the native enzyme at pH 7.5 in the presence of fructose 6-phosphate or fructose 1,6-bisphosphate.     

The role of hydrophobic interactions in catalysis of RNA cleavage by 1,4-diazabicyclo[2.2.2]-octane based artificial ribonucleases

Molecular interactions of RNA cleaving compounds-conjugates of 1,4-diazabicyclo[2.2.2.]octane substituted at the bridge position with tetradecamethylene fragment and imidazole were investigated using light scattering and small angle x-ray scattering methods. The compounds are known to efficiently cleave RNA and one source of the activity could result from micellar catalysis. It was found that the compounds indeed are capable of forming complex aggregates in solution. However, maximal efficacy of RNA cleavage by the conjugates is observed at concentrations well below the concentration required for micelle formation.     

Coarse-grained molecular dynamics simulations of fibrin polymerization: effects of thrombin concentration on fibrin clot structure

Studies suggest that patients with deep vein thrombosis and diabetes often have hypercoagulable blood plasma, leading to a higher risk of thromboembolism formation through the rupture of blood clots, which may lead to stroke and death. Despite many advances in the field of blood clot formation and thrombosis, the influence of mechanical properties of fibrin in the formation of thromboembolisms in platelet-poor plasma is poorly understood. In this paper, we combine the concepts of reactive molecular dynamics and coarse-grained molecular modeling to predict the complex network formation of fibrin clots and the branching of fibrin monomers. The 340-kDa fibrinogen molecule was converted into a coarse-grained molecule with nine beads, and using our customized reactive potentials, we simulated the formation and polymerization process of a fibrin clot. The results show that higher concentrations of thrombin result in higher branch-point formation in the fibrin clot structure. Our results also highlight many interesting properties, such as the formation of thicker or thinner fibers depending on the thrombin concentration. To the best of our knowledge, this is the first successful molecular polymerization study of fibrin clots to focus on thrombin concentration.