A reaction landscape identifies the intermediates critical for self-assembly of virus capsids and other polyhedral structures

The capsids of spherical viruses may contain from tens to hundreds of copies of the capsid protein(s). Despite their complexity, these particles assemble rapidly and with high fidelity. Subunit and capsid represent unique end states. However, the number of intermediate states in these reactions can be enormous-a situation analogous to the protein folding problem. Approaches to accurately model capsid assembly are still in their infancy. In this paper, we describe a sail-shaped reaction landscape, defined by the number of subunits in each species, the predicted prevalence of each species, and species stability. Prevalence can be calculated from the probability of synthesis of a given intermediate and correlates well with the appearance of intermediates in kinetics simulations. In these landscapes, we find that only those intermediates along the leading edge make a significant contribution to assembly. Although the total number of intermediates grows exponentially with capsid size, the number of leading-edge intermediates grows at a much slower rate. This result suggests that only a minute fraction of intermediates needs to be considered when describing capsid assembly.     

A Single Mutation at Residue 25 Populates the Folding Intermediate of E. coli RNase H and Reveals a Highly Dynamic Partially Folded Ensemble

Understanding the nature of partially folded intermediates transiently populated during protein folding is important for understanding both protein folding and misfolding. These ephemeral species, however, often elude direct experimental characterization. The well-characterized protein ribonuclease H (RNase H) from Escherichia coli populates an on-pathway intermediate identified in both bulk studies and single-molecule mechanical unfolding experiments. Here, we set out to trap the transient intermediate of RNase H at equilibrium by selectively destabilizing the region of the protein known to be unfolded in this species. Surprisingly, a single change at Ile25 (I25A) resulted in the equilibrium population of the intermediate under near-native conditions. The intermediate was undetectable in a series of heteronuclear single quantum coherences, revealing the dynamic nature of this partially unfolded form on the timescale of NMR detection. This result is in contrast to studies in which the structures of trapped intermediates are solved by NMR, indicating that they are well packed and native-like. The dynamic nature of the RNase H intermediate may be important for its role as an on-pathway, productive species that promotes efficient folding.     

Mass spectrometry reveals the missing links in the assembly pathway of the bacterial 20 S proteasome

The 20 S proteasome is an essential proteolytic particle, responsible for degrading short-lived and abnormal intracellular proteins. The 700-kDa assembly is comprised of 14 alpha-type and 14 beta-type subunits, which form a cylindrical architecture composed of four stacked heptameric rings (alpha7beta7beta7alpha7). The formation of the 20 S proteasome is a complex process that involves a cascade of folding, assembly, and processing events. To date, the understanding of the assembly pathway is incomplete due to the experimental challenges of capturing short-lived intermediates. In this study, we have applied a real-time mass spectrometry approach to capture transient species along the assembly pathway of the 20 S proteasome from Rhodococcus erythropolis. In the course of assembly, we observed formation of an early alpha/beta-heterodimer as well as an unprocessed half-proteasome particle. Formation of mature holoproteasomes occurred in concert with the disappearance of half-proteasomes. We also analyzed the beta-subunits before and during assembly and reveal that those with longer propeptides are incorporated into half- and full proteasomes more rapidly than those that are heavily truncated. To characterize the preholoproteasome, formed by docking of two unprocessed half-proteasomes and not observed during assembly of wild type subunits, we trapped this intermediate using a beta-subunit mutational variant. In summary, this study provides evidence for transient intermediates in the assembly pathway and reveals detailed insight into the cleavage sites of the propeptide.     

Analysis of the assembly profiles for mitochondrial- and nuclear-DNA-encoded subunits into complex I

Complex I of the respiratory chain is composed of at least 45 subunits that assemble together at the mitochondrial inner membrane. Defects in human complex I result in energy generation disorders and are also implicated in Parkinson's disease and altered apoptotic signaling. The assembly of this complex is poorly understood and is complicated by its large size and its regulation by two genomes, with seven subunits encoded by mitochondrial DNA (mtDNA) and the remainder encoded by nuclear genes. Here we analyzed the assembly of a number of mtDNA- and nuclear-gene-encoded subunits into complex I. We found that mtDNA-encoded subunits first assemble into intermediate complexes and require significant chase times for their integration into the holoenzyme. In contrast, a set of newly imported nuclear-gene-encoded subunits integrate with preexisting complex I subunits to form intermediates and/or the fully assembly holoenzyme. One of the intermediate complexes represents a subassembly associated with the chaperone B17.2L. By using isolated patient mitochondria, we show that this subassembly is a productive intermediate in complex I assembly since import of the missing subunit restores complex I assembly. Our studies point to a mechanism of complex I biogenesis involving two complementary processes, (i) synthesis of mtDNA-encoded subunits to seed de novo assembly and (ii) exchange of preexisting subunits with newly imported ones to maintain complex I homeostasis. Subunit exchange may also act as an efficient mechanism to prevent the accumulation of oxidatively damaged subunits that would otherwise be detrimental to mitochondrial oxidative phosphorylation and have the potential to cause disease.     

Extended Structures in RNA Folding Intermediates Are Due to Nonnative Interactions Rather than Electrostatic Repulsion

RNA folding occurs via a series of transitions between metastable intermediate states for Mg²⁺ concentrations below those needed to fold the native structure. In general, these folding intermediates are considerably less compact than their respective native states. Our previous work demonstrates that the major equilibrium intermediate of the 154-residue specificity domain (S-domain) of the Bacillus subtilis RNase P RNA is more extended than its native structure. We now investigate two models with falsifiable predictions regarding the origins of the extended intermediate structures in the S-domains of the B. subtilis and the Escherichia coli RNase P RNA that belong to different classes of P RNA and have distinct native structures. The first model explores the contribution of electrostatic repulsion, while the second model probes specific interactions in the core of the folding intermediate. Using small-angle X-ray scattering and Langevin dynamics simulations, we show that electrostatics plays only a minor role, whereas specific interactions largely account for the extended nature of the intermediate. Structural contacts in the core, including a nonnative base pair, help to stabilize the intermediate conformation. We conclude that RNA folding intermediates adopt extended conformations due to short-range, nonnative interactions rather than generic electrostatic repulsion of helical domains. These principles apply to other ribozymes and riboswitches that undergo functionally relevant conformational changes.     

Snapshots of pre-rRNA structural flexibility reveal eukaryotic 40S assembly dynamics at nucleotide resolution

Ribosome assembly in eukaryotes involves the activity of hundreds of assembly factors that direct the hierarchical assembly of ribosomal proteins and numerous ribosomal RNA folding steps. However, detailed insights into the function of assembly factors and ribosomal RNA folding events are lacking. To address this, we have developed ChemModSeq, a method that combines structure probing, high-throughput sequencing and statistical modeling, to quantitatively measure RNA structural rearrangements during the assembly of macromolecular complexes. By applying ChemModSeq to purified 40S assembly intermediates we obtained nucleotide-resolution maps of ribosomal RNA flexibility revealing structurally distinct assembly intermediates and mechanistic insights into assembly dynamics not readily observed in cryo-electron microscopy reconstructions. We show that RNA restructuring events coincide with the release of assembly factors and predict that completion of the head domain is required before the Rio1 kinase enters the assembly pathway. Collectively, our results suggest that 40S assembly factors regulate the timely incorporation of ribosomal proteins by delaying specific folding steps in the 3′ major domain of the 20S pre-ribosomal RNA.     

Analysis of early events in acetylcholine receptor assembly

Mammalian cell lines expressing nicotinic acetylcholine receptor (AChR) subunit cDNAs from Torpedo californica were used to study early events in AChR assembly. To test the hypothesis that individual subunits form homooligomeric intermediates before assembling into alpha 2 beta gamma delta pentamers, we analyzed the sedimentation on sucrose density gradients of each subunit expressed separately in cell lines. We have shown previously that the acute temperature sensitivity of Torpedo AChR subunit assembly is due, in part, to misfolding of the polypeptide chains (Paulson, H.L., and T. Claudio. 1990. J. Cell Biol. 110:1705-1717). We use this phenomenon to further analyze putative assembly-competent intermediates. In nonionic detergent at an assembly-permissive temperature, the majority of alpha, beta, gamma, and delta subunits sediment neither as 3-4S monomers nor as 9S complexes, but rather as 6S species whether synthesized in fibroblasts, myoblasts, or differentiated myosyncytia. Several results indicate that the 6S species are complexes comprised predominantly of incorrectly folded subunit polypeptides. The complexes represent homoaggregates which form rapidly within the cell, are stable to mild SDS treatment and, in the case of alpha, contain some disulfide-linked subunits. The coprecipitation of alpha subunit with BiP or GRP78, a resident protein of the ER, further indicates that at least some of these internally sequestered subunits also associated with an endogenous protein implicated in protein folding. The majority of subunits expressed in these cell lines appear to be aggregates of subunits which are not assembly intermediates and are not assembly-competent. The portion which migrates as monomer, in contrast, appears to be the fraction which is assembly competent. This fraction increases at temperatures more permissive for assembly, further indicating the importance of the monomer as the precursor to assembly of alpha 2 beta gamma delta pentamers.     

Structure and dynamics of oligomeric intermediates in β2-microglobulin self-assembly

β₂-Microglobulin is a 99-residue protein with a propensity to form amyloid-like fibrils in vitro which exhibit distinct morphologies dependent on the solution conditions employed. Here we have used ion mobility spectrometry-mass spectrometry to characterize the oligomeric species detected during the formation of worm-like fibrils of β₂-microglobulin at pH 3.6. Immediately upon sample dissolution, β₂-microglobulin monomer and oligomers—the latter ranging in size from dimer to hexamer—are present as a pool of rapidly interconverting species. Increasing the ionic strength of the solution initiates fibril formation without a lag-phase whereupon these oligomers become more stable and higher-order species (7-mer to >14-mer) are observed. The oligomers detected have collision cross-sectional areas consistent with a linearly stacked assembly comprising subunits of native-like volume. The results provide insights into the identity and properties of the transient, oligomeric intermediates formed during assembly of worm-like fibrils and identify species that differ significantly from the oligomers previously characterized during the nucleated assembly of long, straight fibrils. The data presented demonstrate the interrelationship between different fibril-forming pathways and identify their points of divergence.     

GroEL Can Unfold Late Intermediates Populated on the Folding Pathways of Monellin

The modulation of the folding mechanism of the small protein single-chain monellin (MNEI) by the Escherichia coli chaperone GroEL has been studied. In the absence of the chaperone, the folding of monellin occurs via three parallel routes. When folding is initiated in the presence of a saturating concentration of GroEL, only 50-60% of monellin molecules fold completely. The remaining 40-50% of the monellin molecules remain bound to the GroEL and are released only upon addition of ATP. It is shown that the basic folding mechanism of monellin is not altered by the presence of GroEL, but that it occurs via only one of the three available routes when folding is initiated in the presence of saturating concentrations of GroEL. Two pathways become nonoperational because GroEL binds very tightly to early intermediates that populate these pathways in a manner that makes the GroEL-bound intermediates incompetent to fold. This accounts for the monellin molecules that remain GroEL-bound at the end of the folding reaction. The third pathway remains operational because the GroEL-bound early intermediate on this pathway is folding-competent, suggesting that this early intermediate binds to GroEL in a manner that is different from that of the binding of the early intermediates on the other two pathways. It appears, therefore, that the same protein can bind GroEL in more than one way. The modulation of the folding energy landscape of monellin by GroEL occurs because GroEL binds folding intermediates on parallel folding pathways, in different ways, and with different affinities. Moreover, when GroEL is added to refolding monellin at different times after commencement of refolding, the unfolding of two late kinetic intermediates on two of the three folding pathways can be observed. It appears that the unfolding of late folding intermediates is enabled by a thermodynamic coupling mechanism, wherein GroEL binds more tightly to an early intermediate than to a late intermediate on a folding pathway, with preferential binding energy being larger than the stability of the late intermediate. Hence, it is shown that GroEL can inadvertently and passively cause, through its ability to bind different folding intermediates differentially, the unfolding of late productive intermediates on folding pathways, and that its unfolding action is not restricted solely to misfolded or kinetically trapped intermediates.     

Cold rescue of the thermolabile tailspike intermediate at the junction between productive folding and off-pathway aggregation.

Off-pathway intermolecular interactions between partially folded polypeptide chains often compete with correct intramolecular interactions, resulting in self-association of folding intermediates into the inclusion body state. Intermediates for both productive folding and off-pathway aggregation of the parallel beta-coil tailspike trimer of phage P22 have been identified in vivo and in vitro using native gel electrophoresis in the cold. Aggregation of folding intermediates was suppressed when refolding was initiated and allowed to proceed for a short period at 0 degrees C prior to warming to 20 degrees C. Yields of refolded tailspike trimers exceeding 80% were obtained using this temperature-shift procedure, first described by Xie and Wetlaufer (1996, Protein Sci 5:517-523). We interpret this as due to stabilization of the thermolabile monomeric intermediate at the junction between productive folding and off-pathway aggregation. Partially folded monomers, a newly identified dimer, and the protrimer folding intermediates were populated in the cold. These species were electrophoretically distinguished from the multimeric intermediates populated on the aggregation pathway. The productive protrimer intermediate is disulfide bonded (Robinson AS, King J, 1997, Nat Struct Biol 4:450-455), while the multimeric aggregation intermediates are not disulfide bonded. The partially folded dimer appears to be a precursor to the disulfide-bonded protrimer. The results support a model in which the junctional partially folded monomeric intermediate acquires resistance to aggregation in the cold by folding further to a conformation that is activated for correct recognition and subunit assembly.     

Functional TIM10 chaperone assembly is redox-regulated in vivo

The TIM10 chaperone facilitates the insertion of hydrophobic proteins at the mitochondrial inner membrane. Here we report the novel molecular mechanism of TIM10 assembly. This process crucially depends on oxidative folding in mitochondria and involves: (i) import of the subunits in a Cys-reduced and unfolded state; (ii) folding to an assembly-competent structure maintained by intramolecular disulfide bonding of their four conserved cysteines; and (iii) assembly of the oxidized zinc-devoid subunits to the functional complex. We show that intramolecular disulfide bonding occurs in vivo, whereas intermolecular disulfides observed in vitro are abortive intermediates in the assembly pathway. This novel mechanism of compartment-specific redox-regulated assembly is crucial for the formation of a functional TIM10 chaperone.     

The Impact of Viral RNA on Assembly Pathway Selection

Many single-stranded RNA viruses self-assemble their protein containers around their genomes. The roles that the RNA plays in this assembly process have mostly been ignored, resulting in a protein-centric view of assembly that is unable to explain adequately the fidelity and speed of assembly in such viruses. Using bacteriophage MS2, we demonstrate here via a combination of mass spectrometry and kinetic modelling how viral RNA can bias assembly towards only a small number of the many possible assembly pathways, thus increasing assembly efficiency. Assembly reactions have been studied in vitro using phage coat protein dimers, the known building block of the T = 3 shell, and short RNA stem-loops based on the translational operator of the replicase cistron, a 19 nt fragment (TR). Mass spectrometry has unambiguously identified two on-pathway intermediates in such reactions that have stoichiometry consistent with formation of either a particle 3-fold or 5-fold axis. These imply that there are at least two sub-pathways to the final capsid. The flux through each pathway is controlled by the length of the RNA stem-loop triggering the assembly reaction and this effect can be understood in structural terms. The kinetics of intermediate formation have been studied and show steady-state concentrations for intermediates between starting materials and the T = 3 shell, consistent with an assembly process in which all the steps are in equilibrium. These data have been used to derive a kinetic model of the assembly reaction that in turn allows us to determine the dominant assembly pathways explicitly, and to estimate the effect of the RNA on the free energy of association between the assembling protein subunits. The results reveal that there are only a small number of dominant assembly pathways, which vary depending on the relative ratios of RNA and protein. These results suggest that the genomic RNA plays significant roles in defining the precise assembly sub-pathway followed to create the final capsid.     

The Folding Pathway of the Antibody VL Domain

Antibodies are modular proteins consisting of domains that exhibit a β-sandwich structure, the so-called immunoglobulin fold. Despite structural similarity, differences in folding and stability exist between different domains. In particular, the variable domain of the light chain V_L is unusual as it is associated with misfolding diseases, including the pathologic assembly of the protein into fibrillar structures. Here, we have analysed the folding pathway of a V_L domain with a view to determine features that may influence the relationship between productive folding and fibril formation. The V_L domain from MAK33 (murine monoclonal antibody of the subtype κ/IgG1) has not previously been associated with fibrillisation but is shown here to be capable of forming fibrils. The folding pathway of this V_L domain is complex, involving two intermediates in different pathways. An obligatory early molten globule-like intermediate with secondary structure but only loose tertiary interactions is inferred. The native state can then be formed directly from this intermediate in a phase that can be accelerated by the addition of prolyl isomerases. However, an alternative pathway involving a second, more native-like intermediate is also significantly populated. Thus, the protein can reach the native state via two distinct folding pathways. Comparisons to the folding pathways of other antibody domains reveal similarities in the folding pathways; however, in detail, the folding of the V_L domain is striking, with two intermediates populated on different branches of the folding pathway, one of which could provide an entry point for molecules diverted into the amyloid pathway.     

Intermediates in the refolding of reduced pancreatic trypsin inhibitor

The thiol-disulphide exchange reaction used to renature the reduced pancreatic trypsin inhibitor has been rapidly quenched by acidification or by the addition of iodoacetate or iodoacetamide. The species so trapped at various times during the renaturation of the inhibitor have been analysed by acrylamide gel electrophoresis, which resolved the reduced and renatured inhibitors and several transient species with intermediate electrophoretic mobilities. The intermediates have been tentatively assigned contents of either one or two disulphide bonds by their relative electrophoretic mobilities when free Cys residues were carboxymethylated.The kinetic properties of the species have been determined during renaturation with varying concentrations of several disulphide reagents. The three separable intermediate species with one disulphide bond appear to be in rapid equilibrium via an intramolecular transition and fulfil the kinetic criteria for alternative intermediates on the folding pathway. Several species with two disulphide bonds accumulate under some circumstances. Their kinetic roles have not been fully elucidated, but at least some of them seem to be kinetically trapped species not on the main folding pathway. They appear to be particularly unstable species, one disulphide bond being readily broken.     

Distinguishing reversible from irreversible virus capsid assembly

Capsids of spherical viruses may be constructed from hundreds or thousands of copies of the major capsid protein(s). These assembly reactions are poorly understood. Here we consider the predicted behavior for assembly where the component reactions have weak association energy and are reversible and compare them to essentially irreversible reactions. The comparisons are based on mass action calculations and the behavior predicted from kinetic simulations where assembly is described as a cascade of low order reactions. Reversible reactions are characterized by a pseudo-critical concentration, whereas irreversible reactions consume all free subunits. Irreversible reactions are more susceptible to kinetic traps comprised of numerous small intermediates. In the case where only the ultimate step is irreversible, very low concentrations of intermediates slow the completion of the reaction so that overall it closely matches the predictions for the reversible reactions that make up the majority of the cascade. Data in the literature strongly support the hypothesis that most viruses are held together by many weak interactions.     

Dimeric procaspase-3 unfolds via a four-state equilibrium process.

We have examined the folding and assembly of a catalytically inactive mutant of procaspase-3, a homodimeric protein that belongs to the caspase family of proteases. The caspase family, and especially caspase-3, is integral to apoptosis. The equilibrium unfolding data demonstrate a plateau between 3 and 5 M urea, consistent with an apparent three-state unfolding process. However, the midpoint of the second transition as well as the amplitude of the plateau are dependent on the protein concentration. Overall, the data are well described by a four-state equilibrium model in which the native dimer undergoes an isomeration to a dimeric intermediate, and the dimeric intermediate dissociates to a monomeric intermediate, which then unfolds. By fitting the four-state model to the experimental data, we have determined the free energy change for the first step of unfolding to be 8.3 +/- 1.3 kcal/mol. The free energy change for the dissociation of the dimeric folding intermediate to two monomeric intermediates is 10.5 +/- 1 kcal/mol. The third step in the unfolding mechanism represents the complete unfolding of the monomeric intermediate, with a free energy change of 7.0 +/- 0.5 kcal/mol. These results show two important points. First, dimerization of procaspase-3 occurs as a result of the association of two monomeric folding intermediates, demonstrating that procaspase-3 dimerization is a folding event. Second, the stability of the dimer contributes significantly to the conformational free energy of the protein (18.8 of 25.8 kcal/mol).     

Structural and Mechanical Hierarchies in the α-Crystallin Domain Dimer of the Hyperthermophilic Small Heat Shock Protein Hsp16.5

In biological systems, proteins rarely act as isolated monomers. Association to dimers or higher oligomers is a commonly observed phenomenon. As an example, small heat shock proteins form spherical homo-oligomers of mostly 24 subunits, with the dimeric α-crystallin domain as the basic structural unit. The structural hierarchy of this complex is key to its function as a molecular chaperone. In this article, we analyze the folding and association of the basic building block, the α-crystallin domain dimer, from the hyperthermophilic archaeon Methanocaldococcus jannaschii Hsp16.5 in detail. Equilibrium denaturation experiments reveal that the α-crystallin domain dimer is highly stable against chemical denaturation. In these experiments, protein dissociation and unfolding appear to follow an “all-or-none” mechanism with no intermediate monomeric species populated. When the mechanical stability was determined by single-molecule force spectroscopy, we found that the α-crystallin domain dimer resists high forces when pulled at its termini. In contrast to bulk denaturation, stable monomeric unfolding intermediates could be directly observed in the mechanical unfolding traces after the α-crystallin domain dimer had been dissociated by force. Our results imply that for this hyperthermophilic member of the small heat shock protein family, assembly of the spherical 24mer starts from folded monomers, which readily associate to the dimeric structure required for assembly of the higher oligomer.     

Limited proteolysis analysis of the ribosome is affected by subunit association

Our understanding of the structural organization of ribosome assembly intermediates, in particular those intermediates that result from misfolding leading to their eventual degradation within the cell, is limited because of the lack of methods available to characterize assembly intermediate structures. Because conventional structural approaches, such as NMR, X‐ray crystallography, and cryo‐EM, are not ideally suited to characterize the structural organization of these flexible and sometimes heterogeneous assembly intermediates, we have set out to develop an approach combining limited proteolysis with matrix‐assisted laser desorption/ionization mass spectrometry (MALDI‐MS) that might be applicable to ribonucleoprotein complexes as large as the ribosome. This study focuses on the limited proteolysis behavior of appropriately assembled ribosome subunits. Isolated subunits were analyzed using limited proteolysis and MALDI‐MS and the results were compared with previous data obtained from 70S ribosomes. Generally, ribosomal proteins were found to be more stable in 70S ribosomes than in their isolated subunits, consistent with a reduction in conformational flexibility on subunit assembly. This approach demonstrates that limited proteolysis combined with MALDI‐MS can reveal structural changes to ribosomes on subunit assembly or disassembly, and provides the appropriate benchmark data from 30S, 50S, and 70S proteins to enable studies of ribosome assembly intermediates. © 2009 Wiley Periodicals, Inc. Biopolymers 91: 410–422, 2009. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Quantitative Proteomic Analysis of Ribosome Assembly and Turnover In Vivo

Although high-resolution structures of the ribosome have been solved in a series of functional states, relatively little is known about how the ribosome assembles, particularly in vivo. Here, a general method is presented for studying the dynamics of ribosome assembly and ribosomal assembly intermediates. Since significant quantities of assembly intermediates are not present under normal growth conditions, the antibiotic neomycin is used to perturb wild-type Escherichia coli. Treatment of E. coli with the antibiotic neomycin results in the accumulation of a continuum of assembly intermediates for both the 30S and 50S subunits. The protein composition and the protein stoichiometry of these intermediates were determined by quantitative mass spectrometry using purified unlabeled and ¹⁵N-labeled wild-type ribosomes as external standards. The intermediates throughout the continuum are heterogeneous and are largely depleted of late-binding proteins. Pulse-labeling with ¹⁵N-labeled medium time-stamps the ribosomal proteins based on their time of synthesis. The assembly intermediates contain both newly synthesized proteins and proteins that originated in previously synthesized intact subunits. This observation requires either a significant amount of ribosome degradation or the exchange or reuse of ribosomal proteins. These specific methods can be applied to any system where ribosomal assembly intermediates accumulate, including strains with deletions or mutations of assembly factors. This general approach can be applied to study the dynamics of assembly and turnover of other macromolecular complexes that can be isolated from cells.