Working strokes by single molecules of the kinesin-related microtubule motor ncd

The ncd protein is a dimeric, ATP-powered motor that belongs to the kinesin family of microtubule motor proteins. Here we resolve single mechanochemical cycles of recombinant, dimeric, full-length ncd, using optical-tweezers-based instrumentation and a three-bead, suspended-microtubule assay. Under conditions of limiting ATP, isolated and transient microtubule-binding events exhibit exponentially distributed and ATP-concentration-dependent lifetimes. These events do not involve consecutive steps along the microtubule, quantitatively confirming that ncd is non-processive. At low loads, a single motor molecule produces ATP-triggered working strokes of about 9 nm, which occur at the ends of binding events.     

Origins of reversed directionality in the ncd molecular motor.

The head or motor domain of the ncd (non-claret disjunctional) molecular motor is 41% identical to that of kinesin, yet moves along microtubules in the opposite direction to kinesin. We show here that despite the reversed directionality of ncd, its kinetics in solution are homologous in key respects to those of kinesin. The rate limiting step, ADP release, occurs at 0.0033 s-1 at 100 mM NaCl and is accelerated approximately 1000-fold when the motor binds to microtubules. Other reaction steps are all very fast (> 0.1 s-1) compared with ADP release, and the motor is consequently paused in the ncd.ADP state until microtubule binding occurs (Kd = 2 microM), at which point ADP release is triggered and the motor locks onto the microtubule in a rigor-like state. These data identify close functional homology between the strong binding states of kinesin and ncd, and in view of this we discuss a possible mechanism for directional reversal, in which the strong binding states of ncd and kinesin are functionally identical, but the weak binding states are biased in opposite directions.     

A novel adenosine triphosphate analog with a heavy atom to target the nucleotide binding site of proteins.

We have synthesized 2'-deoxy-2'-iodoadenosine-5'-triphosphate (2'-IATP), a heavy-atom analog of adenosine-5'-triphosphate. This compound was made for X-ray structural studies to target the nucleotide site of ATP binding proteins. It was diffused successfully into crystals of the microtubule-based motor proteins ncd (non-claret disjunctional protein from Drosophila melanogaster) and kinesin. With ncd, the nucleotide binding site was 70% occupied and the crystals were able to diffract X-rays to 2.5 A. The iodo-analog provided a useful isomorphous derivative with overall phasing power 1.89 in the range of 25.0-2.5 A. With kinesin, 2'-IATP co-crystallized with the protein. The crystals diffracted to at least 2.8 A with a phasing power of 1.73 in the range of 20.0-5.0 A. The analog was also found to be a substrate for all of the enzymes tested, including creatine kinase, pyruvate kinase, hexokinase, and myosin, with values of Km and Vmax that were within a factor of 10 of those for ATP. The analog supported muscle contraction, relaxing fibers, and producing active tension with values not statistically different from those obtained with ATP. These results all suggest that this analog should be useful for providing a heavy-atom derivative for crystals of enzymes that bind ATP.     

Visualizing a new binding site of ncd-motor domain on tubulin

Ncd is a microtubule minus-end directed motor of the kinesin superfamily. Previously it has been shown that ncd and kinesin motor domains share the same major binding site on microtubules. Here we report a three-dimensional EM reconstruction of negatively stained two-dimensional Zn-induced tubulin crystal sheets (Zn-sheets) decorated with the ncd motor domain at a resolution of 16 A. This work has revealed a second specific binding site for the ncd motor domain. The motor binding site on the tubulin Zn-sheets spans both alpha and beta tubulin subunits. This binding site is located at a position different from the previously identified ncd binding site on microtubules and may play a role in motor function.     

Microscopic evidence for a minus-end-directed power stroke in the kinesin motor ncd

We used cryo-electron microscopy and image reconstruction to investigate the structure and microtubule-binding configurations of dimeric non-claret disjunctional (ncd) motor domains under various nucleotide conditions, and applied molecular docking using ncd's dimeric X-ray structure to generate a mechanistic model for force transduction. To visualize the alpha-helical coiled-coil neck better, we engineered an SH3 domain to the N-terminal end of our ncd construct (296-700). Ncd exhibits strikingly different nucleotide-dependent three-dimensional conformations and microtubule-binding patterns from those of conventional kinesin. In the absence of nucleotide, the neck adapts a configuration close to that found in the X-ray structure with stable interactions between the neck and motor core domain. Minus-end-directed movement is based mainly on two key events: (i) the stable neck-core interactions in ncd generate a binding geometry between motor and microtubule which places the motor ahead of its cargo in the minus-end direction; and (ii) after the uptake of ATP, the two heads rearrange their position relative to each other in a way that promotes a swing of the neck in the minus-end direction.     

A structural analysis of the interaction between ncd tail and tubulin protofilaments

ncd is a minus-end directed, kinesin-like motor, which binds to microtubules with its motor domain and its cargo domain as well. Typical of retrograde motors, the motor domain of ncd locates to the C-terminal end of the polypeptide chain, and hence, the cargo domain constitutes the N-terminal region. To date, several studies have investigated the interaction properties of the motor domain with microtubules, but very few structural data are available about the tail itself or its interaction with microtubules as cargo. Here, we applied cryo-electron microscopy and helical 3D image reconstruction to 15 protofilament microtubules decorated with an ncd tail fragment (N-terminal residues 83-187, named NT6). In our study, the ncd tail shows a behaviour resembling filamentous MAPs such as tau protein, exhibiting a highly flexible structure with no large globular domains. NT6 binds to four different sites on the outer side of microtubules within the proximity of the kinesin motor-binding site. Two of these sites locate within the groove between two neighbouring protofilaments, and appear as strong binding sites, while the other two sites, located at the outer rim, appear to play a secondary role. In addition, the ncd tail fragment induces the formation of large protofilament sheets, suggesting a tail-induced modification of lateral protofilament contacts.     

Proteolytic mapping of kinesin/ncd-microtubule interface: nucleotide-dependent conformational changes in the loops L8 and L12.

We used a battery of proteases to probe the footprint of microtubules on kinesin and ncd, and to search for nucleotide-induced conformational changes in these two oppositely-directed yet homologous molecular motors. Proteolytic cleavage sites were identified by N-terminal microsequencing and electrospray mass spectrometry, and then mapped onto the recently-determined atomic structures of ncd and kinesin. In both kinesin and ncd, microtubule binding shields a set of cleavage sites within or immediately flanking the loops L12, L8 and L11 and, in ncd, the loop L2. Even in the absence of microtubules, exchange of ADP for AMPPNP in the motor active site drives conformational shifts involving these loops. In ncd, a chymotryptic cleavage at Y622 in L12 is protected in the strong binding AMPPNP conformation, but cleaved in the weak binding ADP conformation. In kinesin, a thermolysin cleavage at L154 in L8 is protected in AMPPNP but cleaved in ADP. We speculate that ATP turnover in the active site governs microtubule binding by cyclically retracting or displaying the loops L8 and L12. Curiously, the retracted state of the loops corresponds to microtubule strong binding. Conceivably, nucleotide-dependent display of loops works as a reversible block on strong binding.     

Effect of statins in stroke prevention

PURPOSE OF REVIEW: This paper reviews recent studies into the outcomes of clinical trials in which statin therapy has been used in the prevention and treatment of strokes. RECENT DEVELOPMENTS: Epidemiologic studies found no or little association between blood cholesterol levels and stroke. Randomized trials have confirmed that LDL lowering decreased the risk of stroke, in diabetic or hypertensive patients with 'normal' LDL cholesterol at baseline, and in patients with coronary artery disease, with respectively 48, 27 and 25% reduction in stroke incidence. A meta-analysis of trials showed that the greater the LDL cholesterol reduction, the greater the intima-media thickness and stroke risk reductions. Even if statins also have 'pleiotropic' effects, their main action seems to be through LDL reduction. The Heart Protection Study only included strokes that occurred 4.6 years before--a time when the stroke event rate is low and the cardiac event rate is high, and so may not have had the power to find a true effect of LDL cholesterol lowering in preventing recurrent stroke. The Stroke Prevention by Aggressive Reduction in Cholesterol Levels (SPARCL) trial may give a definite answer because SPARCL investigators included 4732 patients with brain infarction or transient ischemic attacks and no history of myocardial infarction within 6 months of their stroke event, at a time when the expected stroke rate is very high and the myocardial infarction rate is very low. The results should be announced by mid-2006. SUMMARY: The positive effect of statins on stroke observed in trials of patients with coronary heart disease depended mainly on between-group LDL reduction, but other mechanisms could be involved. Though effective in prevention of major coronary events after a first stroke, statins have not yet been proven effective in prevention of recurrent stroke.     

Regulation of ncd by the oligomeric state of tubulin

We have compared the interaction of ncd (non-claret disjunctional), a kinesin related protein, with microtubules and tubulin heterodimer. Ultracentrifugation experiments revealed that the ncd motor domain, residues 335-700 (ncd335), does not induce tubulin polymerization but stabilizes pre-formed microtubules with a maximum effect at a 1:1 ncd335:tubulin ratio. Ncd335 binding to tubulin or microtubules was estimated by following the change in fluorescence polarization of an exogenous dye attached to Cys670 of ncd335. Ncd335 binding to tubulin (containing GTP or GDP-bound) is characterized by a 2:1 stoichiometry, a higher affinity and an increased sensitivity towards salt, ADP, ATP and AMPPNP, as compared with ncd335 binding to microtubules. Maximum ATPases were 0.06-0.08 sec(-1) and 1.8-2.0 sec(-1) for the ncd335-tubulin and ncd335-microtubules complexes, respectively. Only the polymerized complex is fully functional, suggesting the presence of additional contacts between adjacent protofilaments. Moreover, the data reveal that the oligomeric state of microtubules is a potent regulator for the activity of kinesin related proteins.     

A new look at the microtubule binding patterns of dimeric kinesins

The interactions of monomeric and dimeric kinesin and ncd constructs with microtubules have been investigated using cryo-electron microscopy (cryo-EM) and several biochemical methods. There is a good consensus on the structure of dimeric ncd when bound to a tubulin dimer showing one head attached directly to tubulin, and the second head tethered to the first. However, the 3D maps of dimeric kinesin motor domains are still quite controversial and leave room for different interpretations. Here we reinvestigated the microtubule binding patterns of dimeric kinesins by cryo-EM and digital 3D reconstruction under different nucleotide conditions and different motor:tubulin ratios, and determined the molecular mass of motor-tubulin complexes by STEM. Both methods revealed complementary results. We found that the ratio of bound kinesin motor-heads to alphabeta-tubulin dimers was never reaching above 1.5 irrespective of the initial mixing ratios. It appears that each kinesin dimer occupies two microtubule-binding sites, provided that there is a free one nearby. Thus the appearances of different image reconstructions can be explained by non-specific excess binding of motor heads. Consequently, the use of different apparent density distributions for docking the X-ray structures onto the microtubule surface leads to different and mutually exclusive models. We propose that in conditions of stoichiometric binding the two heads of a kinesin dimer separate and bind to different tubulin subunits. This is in contrast to ncd where the two heads remain tightly attached on the microtubule surface. Using dimeric kinesin molecules crosslinked in their neck domain we also found that they stabilize protofilaments axially, but not laterally, which is a strong indication that the two heads of the dimers bind along one protofilament, rather than laterally bridging two protofilaments. A molecular walking model based on these results summarizes our conclusions and illustrates the implications of symmetry for such models.     

Removal of tightly bound ADP induces distinct structural changes of the two tryptophan-containing regions of the ncd motor domain

ncd is a molecular motor belonging to the kinesin superfamily. In solution, it is a homo-dimer of a 700 amino acid polypeptide. The C-terminus of each polypeptide forms a globular domain of about 40 kDa, the motor domain with ATPase activity. The ATPase site of the motor domain of kinesin family members, including ncd, binds ADP tightly, the release of which is facilitated by microtubules during the mechanochemical ATPase cycle. Previously, we studied the spectroscopic characteristics of the ncd motor domain, focusing on interactions of the transition-moment-dipoles between ADP and aromatic amino acid side chains using circular dichroism (CD) spectroscopy. In the present study, we generated several ncd motor domain mutants. In each, a tryptophanyl or specific tyrosyl residue was mutated. We found that Trp370 and Tyr442, the latter of which stacks directly with the adenine moiety of bound ADP, caused the bound ADP to exhibit peculiar CD signals. In addition, fluorescence measurements revealed that Trp370, but not Trp473, was responsible for the emission intensity change depending on the presence or absence of bound ADP. This fluorescence result implies that the structural change induced at the ADP-binding site (on the release of the ADP) is transmitted to the region that includes Trp370, which is relatively close to the ADP-binding site but not in direct contact with the ADP-binding region. In contrast, Trp473 in the region that is in contact with the alpha-helical coiled coil stalk did not experience the structural changes caused on removal of ADP. The distinct behavior of these two tryptophanyl residues suggests that the ncd motor domain has a bifacial architecture made up of a relatively deformable side including the nucleotide binding site and a more rigid one.     

Toward understanding the structure and interactions of microtubules and motor proteins

To obtain an overall three-dimensional picture of the interaction between microtubules and the motor proteins of the kinesin family it will be necessary to take account of both atomic resolution structures obtained by X-ray crystallography and medium resolution reconstructions obtained by electron cryomicroscopy. We examine the problems associated with obtaining the required structural information from electron micrographs of vitreous ice-embedded microtubules decorated with motor domains. We find that the minus-end directed motor, ncd, decorates microtubules with an 80 Å periodicity as for kinesin. Our theoretical analysis and experiments with ncd illustrate the difficulty in determining unambiguously the surface lattice organization by diffraction analysis of micrographs. 3D reconstructions of decorated microtubules are required to accurately locate the motor domains. Helical diffraction theory is not usually applicable because microtubules are cylindrical structures that rarely have complete helical symmetry. We propose using a back-projection method based on the long pitch helices formed by individual protofilaments. Model reconstructions show that this approach is feasible. © 1995 Wiley-Liss, Inc.     

The crystal structure of the minus-end-directed microtubule motor protein ncd reveals variable dimer conformations

BACKGROUND: The kinesin superfamily of microtubule-associated motor proteins are important for intracellular transport and for cell division in eukaryotes. Conventional kinesins have the motor domain at the N terminus of the heavy chain and move towards the plus end of microtubules. The ncd protein is necessary for chromosome segregation in meiosis. It belongs to a subfamily of kinesins that have the motor domain at the C terminus and move towards the minus end of microtubules. RESULTS: The crystal structure of dimeric ncd has been obtained at 2.9 A resolution from crystals with the C222(1) space group, with two independent dimers per asymmetric unit. The motor domains in these dimers are not related by crystallographic symmetry and the two ncd dimers have significantly different conformations. An alpha-helical coiled coil connects, and interacts with, the motor domains. CONCLUSIONS: The ncd protein has a very compact structure, largely due to extended interactions of the coiled coil with the head domains. Despite this, we find that the overall conformation of the ncd dimer can be rotated by as much as 10 degrees away from that of the twofold-symmetric archetypal ncd. The crystal structures of conventional kinesin and of ncd suggest a structural rationale for the reversal of the direction of movement in chimeric kinesins.     

Cardiomyopathy mutations impact the actin-activated power stroke of human cardiac myosin

Cardiac muscle contraction is driven by the molecular motor myosin, which uses the energy from ATP hydrolysis to generate a power stroke when interacting with actin filaments, although it is unclear how this mechanism is impaired by mutations in myosin that can lead to heart failure. We have applied a fluorescence resonance energy transfer (FRET) strategy to investigate structural changes in the lever arm domain of human β-cardiac myosin subfragment 1 (M2β-S1). We exchanged the human ventricular regulatory light chain labeled at a single cysteine (V105C) with Alexa 488 onto M2β-S1, which served as a donor for Cy3ATP bound to the active site. We monitored the FRET signal during the actin-activated product release steps using transient kinetic measurements. We propose that the fast phase measured with our FRET probes represents the macroscopic rate constant associated with actin-activated rotation of the lever arm during the power stroke in M2β-S1. Our results demonstrated M2β-S1 has a slower actin-activated power stroke compared with fast skeletal muscle myosin and myosin V. Measurements at different temperatures comparing the rate constants of the actin-activated power stroke and phosphate release are consistent with a model in which the power stroke occurs before phosphate release and the two steps are tightly coupled. We suggest that the actin-activated power stroke is highly reversible but followed by a highly irreversible phosphate release step in the absence of load and free phosphate. We demonstrated that hypertrophic cardiomyopathy (R723G)- and dilated cardiomyopathy (F764L)-associated mutations both reduced actin activation of the power stroke in M2β-S1. We also demonstrate that both mutations alter in vitro actin gliding in the presence and absence of load. Thus, examining the structural kinetics of the power stroke in M2β-S1 has revealed critical mutation-associated defects in the myosin ATPase pathway, suggesting these measurements will be extremely important for establishing structure-based mechanisms of contractile dysfunction.     

The kinesin-like ncd protein of Drosophila is a minus end-directed microtubule motor

The Drosophila ncd gene is required for chromosome segregation during female meiosis. Previous analyses suggested that the ncd gene encoded a protein with sequence similarity to the kinesin motor domain, which suggested that, like kinesin, the ncd protein might be a plus end-directed microtubule motor. Here we describe the expression of ncd protein in E. coli and the initial characterization of the ncd protein's motor properties. The ncd protein is indeed a microtubule motor, but the polarity of movement is minus end directed. The ncd protein also has microtubule bundling activity. These findings limit possible models for the in vivo functions of the ncd protein and suggest that motor proteins with similar sequence can generate movement in opposite directions along a microtubule.     

Mechanochemistry of a Viral DNA Packaging Motor

The pentameric ATPase motor gp16 packages double-stranded DNA into the bacteriophage ?29 virus capsid. On the basis of the results of single-molecule experimental studies, we propose a push and roll mechanism to explain how the packaging motor translocates the DNA in bursts of four 2.5 bp power strokes, while rotating the DNA. In this mechanism, each power stroke accompanies P_i release after ATP hydrolysis. Since the high-resolution structure of the gp16 motor is not available, we borrowed characterized features from the P4 RNA packaging motor in bacteriophage ?12. For each power stroke, a lumenal lever from a single subunit is electrostatically steered to the DNA backbone. The lever then pushes sterically, orthogonal to the backbone axis, such that the right-handed DNA helix is translocated and rotated in a left-handed direction. The electrostatic association allows tight coupling between the lever and the DNA and prevents DNA from slipping back. The lever affinity for DNA decreases towards the end of the power stroke and the DNA rolls to the lever on the next subunit. Each power stroke facilitates ATP hydrolysis in the next catalytic site by inserting an Arg -finger into the site, as captured in ?12-P4. At the end of every four power strokes, ADP release happens slowly, so the cycle pauses constituting a dwell phase during which four ATPs are loaded into the catalytic sites. The next burst phase of four power strokes starts once spontaneous ATP hydrolysis takes place in the fifth site without insertion of an Arg finger. The push and roll model provides a new perspective on how a multimeric ATPase transports DNA, and it might apply to other ring motors as well.     

3D electron microscopy of the interaction of kinesin with tubulin

We have studied the structure of microtubules decorated with kinesin motor domains in different nucleotide states by 3D electron microscopy. Having docked the atomic coordinates of both dimeric ADP.kinesin and tubulin heterodimer into a map of kinesin dimers bound to microtubules in the presence of ADP, we try to predict which regions of the proteins interact in the weakly binding state. When either the presence of 5'-adenylyimidodiphosphate (AMP-PNP) or an absence of nucleotides puts motor domains into a strongly-bound state, the 3D maps show changes in the motor domains which modify their interaction with beta-tubulin. The maps also show differences in beta-tubulin conformation compared with undecorated microtubules or those decorated with weakly-bound motors. Strongly-bound ncd appears to produce an identical change.     

Parabolic movement primitives and cortical states: merging optimality with geometric invariance

Previous studies have suggested that several types of rules govern the generation of complex arm movements. One class of rules consists of optimizing an objective function (e.g., maximizing motion smoothness). Another class consists of geometric and kinematic constraints, for instance the coupling between speed and curvature during drawing movements as expressed by the two-thirds power law. It has also been suggested that complex movements are composed of simpler elements or primitives. However, the ability to unify the different rules has remained an open problem. We address this issue by identifying movement paths whose generation according to the two-thirds power law yields maximally smooth trajectories. Using equi-affine differential geometry we derive a mathematical condition which these paths must obey. Among all possible solutions only parabolic paths minimize hand jerk, obey the two-thirds power law and are invariant under equi-affine transformations (which preserve the fit to the two-thirds power law). Affine transformations can be used to generate any parabolic stroke from an arbitrary parabolic template, and a few parabolic strokes may be concatenated to compactly form a complex path. To test the possibility that parabolic elements are used to generate planar movements, we analyze monkeys’ scribbling trajectories. Practiced scribbles are well approximated by long parabolic strokes. Of the motor cortical neurons recorded during scribbling more were related to equi-affine than to Euclidean speed. Unsupervised segmentation of simulta- neously recorded multiple neuron activity yields states related to distinct parabolic elements. We thus suggest that the cortical representation of movements is state-dependent and that parabolic elements are building blocks used by the motor system to generate complex movements.     

Lipid Droplets Purified from Drosophila Embryos as an Endogenous Handle for Precise Motor Transport Measurements

Molecular motor proteins are responsible for long-range transport of vesicles and organelles. Recent works have elucidated the richness of the transport complex, with multiple teams of similar and dissimilar motors and their cofactors attached to individual cargoes. The interaction among these different proteins, and with the microtubules along which they translocate, results in the intricate patterns of cargo transport observed in cells. High-precision and high-bandwidth measurements are required to capture the dynamics of these interactions, yet the crowdedness in the cell necessitates performing such measurements in vitro. Here, we show that endogenous cargoes, lipid droplets purified from Drosophila embryos, can be used to perform high-precision and high-bandwidth optical trapping experiments to study motor regulation in vitro. Purified droplets have constituents of the endogenous transport complex attached to them and exhibit long-range motility. A novel method to determine the quality of the droplets for high-resolution measurements in an optical trap showed that they compare well with plastic beads in terms of roundness, homogeneity, position sensitivity, and trapping stiffness. Using high-resolution and high-bandwidth position measurements, we demonstrate that we can follow the series of binding and unbinding events that lead to the onset of active transport.     

The shapes of the motor domains of two oppositely directed microtubule motors, ncd and kinesin: a neutron scattering study.

The shapes of the motor domains of kinesin and ncd, which move in opposite directions along microtubules, have been investigated. Using proteins expressed in Escherichia coli, it was found that at high salt (> 200 mM) Drosophila ncd motor domain (R335-K700) and human kinesin motor domain (M1-E349) were both sufficiently monomeric to allow an accurate determination of their radii of gyration (Rg) and their molecular weights. The measured Rg values of the ncd and kinesin motor domains in D2O were 2.06 +/- 0.06 and 2.05 +/- 0.04 nm, respectively, and the molecular weights were consistent with those computed from the amino acid compositions. Fitting of the scattering curves to approximately 3.5 nm resolution showed that the ncd and kinesin motor domains can be described adequately by triaxial ellipsoids having half-axes of 1.42 +/- 0.38, 2.24 +/- 0.44, and 3.65 +/- 0.22 nm, and half-axes of 1.52 +/- 0.23, 2.00 +/- 0.25, and 3.73 +/- 0.10 nm, respectively. Both motor domains are described adequately as somewhat flattened prolate ellipsoids with a maximum dimension of approximately 7.5 nm. Thus, it appears that the overall shapes of these motor domains are not the major determinants of the directionality of their movement along microtubules.