Expression and preparation of recombinant hepcidin in Escherichia coli

Hepcidin is a low-molecular-weight, highly disulfide bonded peptide relevant to small intestine iron absorption and body iron homeostasis. In this work, hepcidin was expressed in Escherichia coli as a 10.5 kDa fusion protein (His-hepcidin) with a N-terminal hexahistidine tag. The expressed His-hepcidin existed in the form of inclusion bodies and was purified by IMAC under denaturation condition. Since the fusion partner for hepcidin did not contain other cysteine residues, the formation of disulfide bonds was performed before the His-tag was removed. Then, the oxidized His-hepcidin monomer was separated from protein multimers through gel filtration. Following monomer refolding, hepcidin was cleaved from fusion protein by enterokinase and purified with reverse-phase chromatography. The recombinant hepcidin exhibited obvious antibacterial activity against Bacillus subtilis.     

Molecular cloning and the biochemical characterization of two novel phytases from B. subtilis 168 and B. licheniformis

A novel phytase gene ( phyL) was cloned from Bacillus licheniformis by multiple steps of degenerate and inverse PCR. The coding region of the phyL gene was 1,146 bp in size and a promoter region of approximately 300 bp was identified at the upstream sequence. This gene, together with a phytase gene ( 168phyA) identified in the B. subtilis strain 168 genome by a homology search, was cloned and over-expressed in B. subtilis using a phi105MU331 prophage vector system. Up to 35 units of phytase/ml were secreted into the culture media; and mature enzymes of around 44-47 kDa were purified for characterization. Both phytases exhibited broad temperature and pH optima and showed high thermostability. Of the two, the phytase encoded by phyL exhibited higher thermostability, even at a lower calcium concentration, as it was able to recover 80% of its original activity after denaturation at 95 degrees C for 10 min. With their neutral pH optima and good temperature stabilities, these Bacillus phytases are good candidates for animal feed applications and transgenic studies.     

Protein engineering of disulfide bonds in subtilisin BPN'

Five single-disulfide mutants were studied in subtilisin BPN', a cysteine-free, secreted serine protease from Bacillus amyloliquefaciens. The disulfides were engineered between residues 26-232, 29-119, 36-210, 41-80, and 148-243. These bonds connected a variety of secondary structural elements, located in buried or exposed positions at least 10 A from the catalytic Ser-221, and linked residues that were separated by 39 up to 206 amino acids. All disulfide bonds formed in the enzyme when the expressed protein was secreted from Bacillus subtilis, and the disulfides had only minor effects on the enzyme kinetics. Although these disulfide bonds varied by over 50-fold in their equilibrium constants for reduction with dithiothreitol, there was no correlation between the strength of the disulfide bond and the stability it imparted to the enzyme to irreversible inactivation. In some cases, the disulfide-bonded protein was stabilized greatly relative to its reduced counterpart. However, no disulfide mutant was substantially more stable than wild-type subtilisin BPN'. Some of these results can be rationalized by destabilizing effects of the cysteine mutations that disrupt interactions present in the folded enzyme structure. It is also possible that the rate of irreversible inactivation depends upon the kinetics and not the thermodynamics of unfolding and so the entropically stabilizing effect expected from a disulfide bond may not apply.     

Disulfide bond formation during the folding of influenza virus hemagglutinin

To study the importance of individual sulfhydryl residues during the folding and assembly in vivo of influenza virus hemagglutinin (HA), we have constructed and expressed a series of mutant HA proteins in which cysteines involved in three disulfide bonds have been substituted by serine residues. Investigations of the structure and intracellular transport of the mutant proteins indicate that (a) cysteine residues in the ectodomain are essential both for efficient folding of HA and for stabilization of the folded molecule; (b) cysteine residues in the globular portion of the ectodomain are likely to form native disulfide bonds rapidly and directly, without involvement of intermediate, nonnative linkages; and (c) cysteine residues in the stalk portion of the ectodomain also appear not to form intermediate disulfide bonds, even though they have the opportunity to do so, being separated from their correct partners by hundreds of amino acids including two or more other sulfhydryl residues. We propose a role for the cellular protein BiP in shielding the cysteine residues of the stalk domain during the folding process, thus preventing them from forming intermediate, nonnative disulfide bonds.     

The tandemly repeated domains of a β-propeller phytase act synergistically to increase catalytic efficiency

β-Propeller phytases (BPPs) with tandemly repeated domains are abundant in nature. Previous studies have shown that the intact domain is responsible for phytate hydrolysis, but the function of the other domain is relatively unknown. In this study, a new dual-domain BPP (PhyH) from Bacillus sp. HJB17 was identified to contain an incomplete N-terminal BPP domain (PhyH-DI, residues 41-318) and a typical BPP domain (PhyH-DII, residues 319-644) at the C-terminus. Purified recombinant PhyH and PhyH-DII required Ca(2+) for phytase activity, showed activity at low temperatures (0-35 °C) and pH 6.0-8.0, and remained active (at 37 °C) after incubation at 60 °C and pH 6.0-12.0. Compared with PhyH-DII, PhyH is catalytically more active against phytate (catalytic constant 27.72 versus 4.17 s(-1)), which indicates the importance of PhyH-DI in phytate degradation. PhyH-DI was found to hydrolyze phytate intermediate D-Ins(1,4,5,6) P(4), and to act synergistically (a 1.2-2.5-fold increase in phosphate release) with PhyH-DII, other BPPs (PhyP and 168PhyA) and a histidine acid phosphatase. Furthermore, fusion of PhyH-DI with PhyP or 168PhyA significantly enhanced their catalytic efficiencies. This is the first report to elucidate the substrate specificity of the incomplete domain and the functional relationship of tandemly repeated domains in BPPs. We conjecture that dual-domain BPPs have succeeded evolutionarily because they can increase the amount of available phosphate by interacting together. Additionally, fusing PhyH-DI to a single-domain phytase appears to be an efficient way to improve the activity of the latter.     

Structural and functional roles of cysteine residues of Bacillus polymyxa beta-amylase.

Bacillus polymyxa beta-amylase contains three cysteine residues at positions 83, 91, and 323, which can react with sulfhydryl reagents. To determine the role of cysteine residues in the catalytic reaction, cysteine residues were mutated to construct four mutant enzymes, C83S, C91V, C323S, and C-free. Wild-type and mutant forms of the enzyme were expressed in, and purified to homogeneity from, Bacillus subtilis. A disulfide bond between Cys83 and Cys91 was identified by isolation of tryptic peptides bearing a fluorescent label, IAEDANS, from wild-type and C91 V enzymes followed by amino acid sequencing. Therefore, only Cys323 contains a free SH group. Replacement of cysteine residues with serine or valine residues resulted in a significant decrease in the kcat/Km value of the enzyme. C323S, containing no free SH group, however, retained a high specific activity, approximately 20% of the wild-type enzyme. None of the cysteine residues participate directly in the catalytic reaction.     

Mapping an Interface of SecY (PrlA) and SecE (PrlG) by Using Synthetic Phenotypes and In Vivo Cross-Linking

SecY and SecE are integral cytoplasmic membrane proteins that form an essential part of the protein translocation machinery in Escherichia coli. Sites of direct contact between these two proteins have been suggested by the allele-specific synthetic phenotypes exhibited by pairwise combinations of prlA and prlG signal sequence suppressor mutations in these genes. We have introduced cysteine residues within the first periplasmic loop of SecY and the second periplasmic loop of SecE, at a specific pair of positions identified by this genetic interaction. The expression of the cysteine mutant pair results in a dominant lethal phenotype that requires the presence of DsbA, which catalyzes the formation of disulfide bonds. A reducible SecY-SecE complex is also observed, demonstrating that these amino acids must be sufficiently proximal to form a disulfide bond. The use of cysteine-scanning mutagenesis enabled a second contact site to be discovered. Together, these two points of contact allow the modeling of a limited region of quaternary structure, establishing the first characterized site of interaction between these two proteins. This study proves that actual points of protein-protein contact can be identified by using synthetic phenotypes.     

The nonconsecutive disulfide bond of Escherichia coli phytase (AppA) renders it dependent on the protein-disulfide isomerase, DsbC

The formation of protein disulfide bonds in the Escherichia coli periplasm by the enzyme DsbA is an inaccurate process. Many eukaryotic proteins with nonconsecutive disulfide bonds expressed in E. coli require an additional protein for proper folding, the disulfide bond isomerase DsbC. Here we report studies on a native E. coli periplasmic acid phosphatase, phytase (AppA), which contains three consecutive and one nonconsecutive disulfide bonds. We show that AppA requires DsbC for its folding. However, the activity of an AppA mutant lacking its nonconsecutive disulfide bond is DsbC-independent. An AppA homolog, Agp, a periplasmic acid phosphatase with similar structure, lacks the nonconsecutive disulfide bond but has the three consecutive disulfide bonds found in AppA. The consecutively disulfide-bonded Agp is not dependent on DsbC but is rendered dependent by engineering into it the conserved nonconsecutive disulfide bond of AppA. Taken together, these results provide support for the proposal that proteins with nonconsecutive disulfide bonds require DsbC for full activity and that disulfide bonds are formed predominantly during translocation across the cytoplasmic membrane.     

Oligomerization of H(+)-pyrophosphatase and its structural and functional consequences

The H(+)-pyrophosphatase (H(+)-PPase) consists of a single polypeptide, containing 16 or 17 transmembrane domains. To determine the higher order oligomeric state of Streptomyces coelicolor H(+)-PPase, we constructed a series of cysteine substitution mutants and expressed them in Escherichia coli. Firstly, we analyzed the formation of disulfide bonds, promoted by copper, in mutants with single cysteine substitutions. 28 of 39 mutants formed disulfide bonds, including S545C, a substitution at the periplasmic side. The formation of intermolecular disulfide bonds suppressed the enzyme activity of several, where the substituted residues were located in the cytosol. Creating disulfide links in the cytosol may interfere with the enzyme's catalytic function. Secondly, we prepared double mutants by introducing second cysteine substitutions into the S545C mutant. These double-cysteine mutants produced cross-linked complexes, estimated to be at least tetramers and possibly hexamers. Thirdly, we co-expressed epitope-tagged, wild type, and inactive mutant H(+)-PPases in E. coli and confirmed the formation of oligomers by co-purifying one subunit using the epitope tag used to label the other. The enzyme activity of these oligomers was markedly suppressed. We propose that H(+)-PPase is present as an oligomer made up of at least two or three sets of dimers.     

Modulation of thiol-disulfide oxidoreductases for increased production of disulfide-bond-containing proteins in Bacillus subtilis

Disulfide bonds are important for the correct folding, structural integrity, and activity of many biotechnologically relevant proteins. For synthesis and subsequent secretion of these proteins in bacteria, such as the well-known "cell factory" Bacillus subtilis, it is often the correct formation of disulfide bonds that is the greatest bottleneck. Degradation of inefficiently or incorrectly oxidized proteins and the requirement for costly and time-consuming reduction and oxidation steps in the downstream processing of the proteins still are major limitations for full exploitation of B. subtilis for biopharmaceutical production. Therefore, the present study was aimed at developing a novel in vivo strategy for improved production of secreted disulfide-bond-containing proteins. Three approaches were tested: depletion of the major cytoplasmic reductase TrxA; introduction of the heterologous oxidase DsbA from Staphylococcus carnosus; and addition of redox-active compounds to the growth medium. As shown using the disulfide-bond-containing molecule Escherichia coli PhoA as a model protein, combined use of these three approaches resulted in secretion of amounts of active PhoA that were approximately 3.5-fold larger than the amounts secreted by the parental strain B. subtilis 168. Our findings indicate that Bacillus strains with improved oxidizing properties can be engineered for biotechnological production of heterologous high-value proteins containing disulfide bonds.     

Engineered disulfide bonds increase active-site local stability and reduce catalytic activity of a cold-adapted alkaline phosphatase

Alkaline phosphatase is an extracellular enzyme that is membrane-bound in eukaryotes but resides in the periplasmic space of bacteria. It normally carries four cysteine residues that form two disulfide bonds, for instance in the APs of Escherichia coli and vertebrates. An AP variant from a Vibrio sp. has only one cysteine residue. This cysteine is second next to the nucleophilic serine in the active site. We have individually modified seven residues to cysteine that are on two loops predicted to be within a 5 A radius. Four of them formed a disulfide bond to the endogenous cysteine. Thermal stability was monitored by circular dichroism and activity measurements. Global stability was similar to the wild-type enzyme. However, a significant increase in heat-stability was observed for the disulfide-containing variants using activity as a measure, together with a large reduction in catalytic rates (k(cat)) and a general decrease in Km values. The results suggest that a high degree of mobility near the active site and in the helix carrying the endogenous cysteine is essential for full catalytic efficiency in the cold-adapted AP.     

Protease-deficient DegP suppresses lethal effects of a mutant OmpC protein by its capture

The expression of assembly-defective outer membrane proteins can confer lethality if they are not degraded by envelope proteases. We report here that the expression of a mutant OmpC protein, OmpC(2Cys), which forms disulfide bonds in the periplasm due to the presence of two non-native cysteine residues, is lethal in cells lacking the major periplasmic protease, DegP. This lethality is not observed in dsbA strains that have diminished ability to form periplasmic disulfide bonds. Our data show that this OmpC(2Cys)-mediated lethality in a degP::Km(r) dsbA(+) background can be reversed by a DegP variant, DegP(S210A), that is devoid of its proteolytic activity but retains its reported chaperone activity. However, DegP(S210A) does not reverse the lethal effect of OmpC(2Cys) by correcting its assembly but rather by capturing misfolded mutant OmpC polypeptides and thus removing them from the assembly pathway. Displacement of OmpC(2Cys) by DegP(S210A) also alleviates the negative effect that the mutant OmpC protein has on wild-type OmpF.     

Assignment of interchain disulfide bonds in platelet-derived growth factor (PDGF) and evidence for agonist activity of monomeric PDGF.

Platelet-derived growth factor (PDGF) is a dimeric factor stabilized by disulfide bonds. Using an approach involving partial reduction of PDGF, we have identified the 2nd and 4th cysteine residues in the PDGF chains as the cysteine residues forming interchain disulfide bonds. Analysis of PDGF mutants in which the 2nd and 4th cysteine residues were mutated to serine residues revealed that the disulfide bonds are arranged in a cross-wise manner, with the 2nd cysteine residue in one chain being linked to the 4th cysteine residue in the other. A PDGF B-chain mutant, in which both the 2nd and 4th cysteine residues were substituted with serine residues, migrated as a monomer in sodium dodecyl sulfate gel electrophoresis and retained receptor binding activity. When analyzed in receptor dimerization and autophosphorylation assays, this mutant showed agonistic activity. Thus, structural information has been obtained that will allow the large scale production of properly folded monomeric PDGF, as well as design of specific PDGF heterodimers.     

Lasiocepsin, a novel cyclic antimicrobial peptide from the venom of eusocial bee Lasioglossum laticeps (Hymenoptera: Halictidae)

In the venom of eusocial bee Lasioglossum laticeps, we identified a novel unique antimicrobial peptide named lasiocepsin consisting of 27 amino acid residues and two disulfide bridges. After identifying its primary structure, we synthesized lasiocepsin by solid-phase peptide synthesis using two different approaches for oxidative folding. The oxidative folding of fully deprotected linear peptide resulted in a mixture of three products differing in the pattern of disulfide bridges. Regioselective disulfide bond formation significantly improved the yield of desired product. The synthetic lasiocepsin possessed antimicrobial activity against both Gram-positive and -negative bacteria, antifungal activity against Candida albicans, and no hemolytic activity against human erythrocytes. We synthesized two lasiocepsin analogs cyclized through one native disulfide bridge in different positions and having the remaining two cysteines substituted by alanines. The analog cyclized through a Cys8-Cys25 disulfide bridge showed reduced antimicrobial activity compared to the native peptide while the second one (Cys17-Cys27) was almost inactive. Linear lasiocepsin having all four cysteine residues substituted by alanines or alkylated was also inactive. That was in contrast to the linear lasiocepsin with all four cysteine residues non-paired, which exhibited remarkable antimicrobial activity. The shortening of lasiocepsin by several amino acid residues either from the N- or C-terminal resulted in significant loss of antimicrobial activity. Study of Bacillus subtilis cells treated by lasiocepsin using transmission electron microscopy showed leakage of bacterial content mainly from the holes localized at the ends of the bacterial cells.     

Four free cysteine residues found in human IgG1 of healthy donors

Modifications with different thiol reagents demonstrated that 28 of 32 cysteine residues of human IgG1 are involved in the formation of disulfide bonds, and four cysteines remain free. So IgG1 is a protein possessing both free SH-groups and disulfide bonds. Only one of the four SH-groups is accessible for silver or mercury ions and hydrophobic reagents, whereas the remaining three SH-groups are masked and can be revealed only after deep denaturation of the protein. Detection of the masked cysteine residues was shown to depend on the kinetics of intramolecular changes occurring during denaturation of the protein and on the method of the assay of the SH-groups.     

An engineered disulfide bond in dihydrofolate reductase

Substitution of cysteine for proline-39 in Escherichia coli dihydrofolate reductase by oligonucleotide-directed mutagenesis positions the new cysteine adjacent to already existing cysteine-85. When the mutant protein is expressed in the E. coli cytosol, the cysteine sulfur atoms are found, by X-ray crystallographic analysis, to be in van der Waals contact but not covalently bonded to one another. In vitro oxidation by dithionitrobenzoate results in formation of a disulfide bond between residues 39 and 85 with a geometry close to that of the commonly observed left-handed spiral. Comparison of 2.0-A-refined crystal structures of the oxidized (cross-linked) and reduced (un-cross-linked) forms of the mutant enzyme shows that the conformation of the enzyme molecule was not appreciably affected by formation of the disulfide bond but that details of the molecule's thermal motion were altered. The disulfide-cross-linked enzyme is at least 1.8 kcal/mol more stable with respect to unfolding, as measured by guanidine hydrochloride denaturation, than either the wild-type or the reduced (un-cross-linked) mutant enzyme. Nevertheless, the cross-linked form is not more resistant to thermal denaturation. Moreover, the appearance of intermediates in the guanidine hydrochloride denaturation profile and urea-gradient polyacrylamide gels indicates that the folding/unfolding pathway of the disulfide-cross-linked enzyme has changed significantly.     

Functional rescue of the nephrogenic diabetes insipidus-causing vasopressin V2 receptor mutants G185C and R202C by a second site suppressor mutation

Mutations in the gene of the G protein-coupled vasopressin V2 receptor (V2 receptor) cause X-linked nephrogenic diabetes insipidus (NDI). Most of the missense mutations on the extracellular face of the receptor introduce additional cysteine residues. Several groups have proposed that these residues might disrupt the conserved disulfide bond of the V2 receptor. To test this hypothesis, we first calculated a structure model of the extracellular receptor domains. The model suggests that the additional cysteine residues may form a second disulfide bond with the free, nonconserved extracellular cysteine residue Cys-195 rather than impairing the conserved bond. To address this question experimentally, we used the NDI-causing mutant receptors G185C and R202C. Their Cys-195 residues were replaced by alanine to eliminate the hypothetical second disulfide bonds. This second site mutation led to functional rescue of both NDI-causing mutant receptors, strongly suggesting that the second disulfide bonds are indeed formed. Furthermore we show that residue Cys-195, which is sensitive to "additional cysteine" mutations, is not conserved among the V2 receptors of other species and that the presence of an uneven number of extracellular cysteine residues, as in the human V2 receptor, is rare among class I G protein-coupled receptors.     

Removal of disulfide from acid stress chaperone HdeA does not wholly eliminate structure or function at low pH

HdeA is an acid-stress chaperone that operates in the periplasm of various strains of pathogenic gram-negative bacteria. Its primary function is to prevent irreversible aggregation of other periplasmic proteins when the bacteria enter the acidic environment of the stomach after contaminated food is ingested; its role is therefore to help the bacteria survive long enough to enter and colonize the intestines. The mechanism of operation of HdeA is unusual in that this helical homodimer is inactive when folded at neutral pH but becomes activated at low pH after the dimer dissociates and partially unfolds. Studies with chemical reducing agents previously suggested that the intramolecular disulfide bond is important for maintaining residual structure in HdeA at low pH and may be responsible for positioning exposed hydrophobic residues together for the purpose of binding unfolded client proteins. In order to explore its role in HdeA structure and chaperone function we performed a conservative cysteine to serine mutation of the disulfide. We found that, although residual structure is greatly diminished at pH 2 without the disulfide, it is not completely lost; conversely, the mutant is almost completely random coil at pH 6. Aggregation assays showed that mutated HdeA, although less successful as a chaperone than wild type, still maintains a surprising level of function. These studies highlight that we still have much to learn about the factors that stabilize residual structure at low pH and the role of disulfide bonds.     

Dsb-insensitive expression of CcrA, a metallo-beta-lactamase from Bacteroides fragilis, in Escherichia coli after amino acid substitution at two cysteine residues within CcrA.

It has previously been shown that functional expression of CcrA, a metallo-beta-lactamase from Bacteroides fragilis, in Escherichia coli requires a mutation in either dsbA or dsbB, components of a periplasmic disulfide bond-catalyzing system. Site-directed mutagenesis resulting in the substitution of various amino acids for two of the three cysteine residues within CcrA allowed the expression of CcrA in a dsb+ background. This finding supports the hypothesis that DsbA creates aberrant disulfide bonds involving the Cys residues of CcrA.     

Inhibition of microbial growth by ajoene, a sulfur-containing compound derived from garlic.

Ajoene, a garlic-derived sulfur-containing compound that prevents platelet aggregation, exhibited broad-spectrum antimicrobial activity. Growth of gram-positive bacteria, such as Bacillus cereus, Bacillus subtilis, Mycobacterium smegmatis, and Streptomyces griseus, was inhibited at 5 micrograms of ajoene per ml. Staphylococcus aureus and Lactobacillus plantarum also were inhibited below 20 micrograms of ajoene per ml. For gram-negative bacteria, such as Escherichia coli, Klebsiella pneumoniae, and Xanthomonas maltophilia, MICs were between 100 and 160 micrograms/ml. Ajoene also inhibited yeast growth at concentrations below 20 micrograms/ml. The microbicidal effect of ajoene on growing cells was observed at slightly higher concentrations than the corresponding MICs. B. cereus and Saccharomyces cerevisiae were killed at 30 micrograms of ajoene per ml after 24 h of cultivation when cultivation was started at 10(5) cells per ml. However, the minimal microbicidal concentrations for resting cells were at 10 to 100 times higher concentrations than the corresponding MICs. The disulfide bond in ajoene appears to be necessary for the antimicrobial activity of ajoene, since reduction by cysteine, which reacts with disulfide bonds, abolished its antimicrobial activity.