Fine structure of transposition genes on Tn2603 and complementation of its tnpA and tnpR mutations by related transposons

The fine structure of the genes tnpA, tnpR and res of Tn2603 required for its own transposition, was determined. The order of the genes was tnpA-tnpR-res from the right end of the right hand side region in Tn2603, the tnpA and tnpR encoded gene products having molecular weights of 110,000 and 21,000, respectively. The 110,000 molecular weight polypeptides was absolutely required for replicon fusion as the first stage of transposition, and named transposase. On the other hand, the 21,000 molecular weight polypeptide was necessary for resolution of the cointegrate as the second stage of transposition, and named resolvase. We also examined the ability of various transposons, assumed to be closely related, to complement the tnpA and tnpR mutations of Tn2603. The results indicated that the mercury resistance transposon, Tn2613, and Tn501, can complement both genes, but TnAs and gamma delta cannot at all. Tn501 had much less efficiency of complementation for tnpA than Tn2613. We have also discovered that the transposition frequency of transposons in the tn2613 family systematically depend on their size of transposon.     

Toluene transposons Tn4651 and Tn4653 are class II transposons

The toluene degradative transposon Tn4651 is included within another transposon, Tn4653, and both of these elements are members of the Tn3 family. The tnpA gene product of each element mediates formation of cointegrates as intermediate products of transposition, and the tnpS and tnpT gene products encoded by Tn4651 take part in resolution of both Tn4651- and Tn4653-mediated cointegrates. Sequence analysis demonstrated that Tn4651 and Tn4653 have 46- and 38-base-pair terminal inverted repeats, respectively, and that both elements generate 5-base-pair duplication of the target sequence upon transposition. Complementation tests of the Tn4651- and Tn4653-encoded transposition functions with those of Tn3, Tn21, and Tn1721 showed that (i) the trans-acting transposition functions encoded by Tn4651 were not interchangeable with those encoded by the four other transposons, (ii) the Tn4653 tnpA function was interchangeable with the Tn1721 function, and (iii) Tn4653 coded for a resolvase (tnpR gene product) that complemented the tnpR mutations of Tn21 and Tn1721. The Tn4653 tnpR gene was located just 5' upstream of the tnpA gene and shared extensive sequence homology with the Tn1721 tnpR gene. The res region was located adjacent to the tnpR gene, and sequence analysis indicated that failure of the Tn4653 tnpR product to resolve the Tn4653-mediated cointegrates is ascribed to an incomplete structure of the res region.     

Four genes, two ends, and a res region are involved in transposition of Tn5053: a paradigm for a novel family of transposons carrying either a mer operon or an integron

The complete nucleotide sequence of an 8447 bp-long mercury-resistance transposon (Tn 5053 ) has been determined. Tn 5053 is composed of two modules: (i) the mercury-resistance module and (ii) the transposition module. The mercury-resistance module carries a mer operon, merRTPFAD , and appears to be a single-ended relic of a transposon closely related to the classical mercury-resistance transposons Tn 21 and Tn 501 . The transposition module of Tn 5053 is bounded by 25 bp terminal inverted repeats and contains four genes involved in transposition, i.e. tniA, tniB, tniQ , and tniR . Transposition of Tn 5053 occurs via cointegrate formation mediated by the products of the tniABQ genes, followed by site-specific cointegrate resolution. This is catalysed by the product of the tniR gene at the res region, which is located upstream of tniR . The same pathway of transposition is used by Tn 402 (Tn 5090 ) which carries the integron of R751. Transposition genes of Tn 5053 and Tn 402 are interchangeable. Sequence analysis suggests that Tn 5053 and Tn 402 are representatives of a new family of transposable elements, which fall into a recently recognized superfamily of transposons including retroviruses, insertion sequences of the IS 3 family, and transposons Tn 552 and Tn 7 . We suggest that the tni genes were involved in the dissemination of integrons.     

Overproduction of the Tn3 transposition protein and its role in DNA transposition

Five single base pair mutations that increase expression of the tnpA (transposase) gene of the Tn3 transposon approximately 30-fold, but which still allow the gene to be regulated, have been isolated by using a generally applicable procedure that involves distally linked lac gene fusions. The mutations, which are all located in a region controlling initiation of translation of the tnpA gene, do not affect normal repression of tnpA by the tnpR gene product, and yield up to a 9000-fold increase in tnpA protein production when combined with a tnpR mutation and placed on a high copy number plasmid. The mutation yielding the highest expression level was separated from the fused lac gene segment by homologous recombination and was found to increase the rate of transposition without altering the nature of the transposition product; in cells defective in both the E. coli recA gene and the tnpR gene of tn3, cointegrate transposition-intermediate structures occur with the overproducing--as well as with the wild-type--tnpA gene. In the presence of a functional Tn3 tnpR gene or the related transposon delta gamma, such cointegrate structures are resolved into the final products of transposition.     

Identification and characterization of Tn4656, a novel class II transposon carrying a set of toluene-degrading genes from TOL plasmid pWW53

It has been reported that the toluene-degrading (xyl) genes from Pseudomonas putida plasmid pWW53 are able to translocate to broad-host-range drug resistance plasmid RP4, and pWW53-4 is one of the smallest RP4 derivatives (H. Keil, S. Keil, R. W. Pickup, and P. A. Williams, J. Bacteriol. 164:887-895, 1985). Our investigation of pWW53-4 in this study demonstrated that such a translocated region that is 39 kb long is a transposon. This mobile element, Tn4656, was classified as a class II transposon since its transposition occurred by a two-step process: transposase (TnpA)-mediated formation of the cointegrate and resolvase (TnpR)-mediated site-specific resolution of the cointegrate at the two copies of the res site. The Tn4656 TnpA and TnpR functions encoded in the rightmost 4-kb region were found to be exchangeable with those specified by other Tn1721-related class II transposons, including another toluene transposon, Tn4653. Sequence analysis of the transposition-related genes and sites of Tn4656 also supported the hypothesis that this transposon is closely related to the Tn1721-related transposons. The lower transposition frequency of Tn4656 has been suggested to be due to the unique nucleotide sequence of one of the terminal 39-bp inverted repeats.     

Tn5037-a Tn21-like mercury transposon, detected in Thiobacillus ferrooxidans

The 6645-bp mercury resistance transposon of the chemolithotrophic bacterium Thiobacillus ferrooxidans was cloned and sequenced. This transposon, named Tn5037, belongs to the Tn21 branch of the Tn21 subgroup, many members of which have been isolated from clinical sources. Having the minimum set of the genes (merRTPA), the mercury resistance operon of Tn5037 is organized similarly to most of the Gram-negative bacteria mer operons and is closest to that of Thiobacillus 3.2. The operator-promoter region of the mer operon of Tn5037 also has the common (Tn21/Tn501-like) structure. However, its inverted, presumably MerR protein binding repeats in the operator/promoter element are two base pairs shorter than in Tn21/Tn501. In the merA region, this transposon shares 77.4, 79.1, 83.2 and 87.8% identical bases with Tn21, Tn501, T. ferrooxidance E-15, and Thiobacillus 3.2, respectively. No inducibility of the Tn5037 mer operon was detected in the in vivo experiments. The transposition system (terminal repeats plus gene tnpA) of Tn5037 was inactive in Escherichia coli K12, in contrast to its resolution system (res site plus gene tnpR). However, transposition of Tn5037 in this host was provided by the tnpA gene of Tn5036, a member of the Tn21 subgroup. Sequence analysis of the Tn5037 res site suggested its recombinant nature.     

The phosphotriesterase gene opdA in Agrobacterium radiobacter P230 is transposable

We report a transposase gene (tnpA) upstream of the opdA phosphotriesterase gene of Agrobacterium radiobacter P230, as well as inverted repeats indicative of insertion sequences, flanking the two genes. Both the tnpA gene and the inverted repeats resemble the Tn610 transposon from Mycobacterium fortuitum. Two additional putative open reading frames separate opdA and tnpA with inferred translation products with similarity to two proteins encoded on the Geobacillus stearothermophilus IS5376 transposon. To test the proposition that these genes were contained on a transposon, an artificial composite transposon was constructed. This artificial transposon was then delivered into Escherichia coli DH10beta cells. Transposition was demonstrated by the presence of opdA on the E. coli chromosome and confirmation of insertion by inverse polymerase chain reaction. The data presented suggest a possible role of transposition in the distribution of the opd/opdA genes across a wide range of soil bacteria.     

Transposition of Tn1000: in vivo properties.

Transposition mediated by the Tn1000 transposase was investigated by using transposon variants carrying synthetic or wild-type termini but no intact Tn1000 genes. Transposon Tn1001, whose only homologies to Tn1000 are in its 38-base-pair terminal inverted repeats, transposed at the same rate as Tn1005, an artificial construct carrying wild-type Tn1000 termini and approximately 1 kilobase of flanking Tn1000 DNA at each end, when transposase was supplied in trans. The majority of the transpositions into pOX38 gave rise to cointegrates, but approximately 10% of the products expressed phenotypes of direct transpositions. The expression and temperature dependence of the tnpA gene product were examined by studying transposition of Tn1001 to bacteriophage lambda. The temperature optimum for transposition was 37 degrees C, and the transposase was stable for up to 2 h at this temperature.     

A third transposable element,ISPpu12, from the toluene-xylene catabolic plasmid pWW0 of Pseudomonas putida mt-2

A 3,372-bp insertion sequence, ISPpu12, has been identified on the archetypal toluene-xylene TOL catabolic plasmid pWW0 from Pseudomonas putida mt-2. The insertion sequence element is located on the plasmid between bases 84397 and 87768 in a region which also contains the termini and transposase genes of the catabolic transposons Tn4651 and Tn4653 (A. Greated, L. Lambertson, P. A. Williams, and C. M. Thomas, Environ. Microbiol., in press). ISPpu12 has terminal inverted repeats of 24 bp with three mismatches and contains four open reading frames, a tnpA homologue and three open reading frames (lspA, orf1, and orf2) of undetermined function. After insertion in vitro of a Km(r) cassette into ISPpu12 either in the intergenic region between orf1 and orf2 or directly into the orf1 gene and ligation into a suicide vector, the modified ISPpu12-Km transposes at high frequency, often in multiple copies, into the chromosome of a P. putida recipient. Inactivation of lspA, orf1, and orf2 by introducing a 7-bp deletion into the 5' region of each gene had no major effect upon transposition, but a similar mutation of tnpA completely eliminated transposition. Analysis of the literature and of strains derived from the chlorobenzoate-degrading Pseudomonas sp. strain B13 suggests that the promiscuity of this element has played an important role in the history of plasmid pWW0. Database comparisons and the accompanying paper (A. J. Weightman, A. W. Topping, K. E. Hill, L. L. Lee, K. Sakai, J. H. Slater, and A. W. Thomas, J. Bacteriol. 184:6581-6591, 2002) show that ISPpu12 is a transposable element also found in other bacteria.     

Structure and function of Tn5467, a Tn21-like transposon located on the Thiobacillus ferrooxidans broad-host-range plasmid pTF-FC2.

A 3.5-kb region of plasmid pTF-FC2, which contains a transposon-like element designated Tn5467, has been sequenced, and its biological activity has been investigated. The transposon is bordered by two 38-bp inverted repeat sequences which have sequence identity in 37 of 38 and in 38 of 39 bp to the tnpA distal and tnpA proximal inverted repeats of Tn21, respectively. Within these borders, open reading frames with amino acid similarity to a glutaredoxin-like protein, a MerR regulatory protein, and a multidrug-resistant-membrane transport-like protein were found. The gene for the glutaredoxin-like protein was expressed in Escherichia coli and enabled growth of a glutathione-requiring E. coli trxA gshA mutant on minimal medium and the reduction of methionine sulfoxide to methionine. In addition, there were two regions which, when translated, had homology to 85% of the N-terminal region of the Tn21 resolvase (tnpR) and to 15% of the C terminus of the Tn21 transposase (tnpA). A region containing res-like sites was located immediately upstream of the partial tnpR gene. Neither the partial transposase nor the resolvase genes of Tn5467 were biologically active, but Tn5467 was transposed and resolved when the Tn21 transposase and resolvase were provided in trans. Tn5467 appears to be a defective transposon which belongs to the Tn21 subgroup of the Tn3 family.     

Transposon vectors containing non-antibiotic resistance selection markers for cloning and stable chromosomal insertion of foreign genes in gram-negative bacteria.

A simple procedure for cloning and stable insertion of foreign genes into the chromosomes of gram-negative eubacteria was developed by combining in two sets of plasmids (i) the transposition features of Tn10 and Tn5; (ii) the resistances to the herbicide bialaphos, to mercuric salts and organomercurial compounds, and to arsenite, and (iii) the suicide delivery properties of the R6K-based plasmid pGP704. The resulting constructions contained unique NotI or SfiI sites internal to either the Tn10 or the Tn5 inverted repeats. These sites were readily used for cloning DNA fragments with the help of two additional specialized cloning plasmids, pUC18Not and pUC18Sfi. The newly derived constructions could be maintained only in donor host strains that produce the R6K-specified pi protein, which is an essential replication protein for R6K and plasmids derived therefrom. Donor plasmids containing hybrid transposons were transformed into a specialized lambda pir lysogenic Escherichia coli strain with a chromosomally integrated RP4 that provided broad-host-range conjugal transfer functions. Delivery of the donor plasmids into selected host bacteria was accomplished through mating with the target strain. Transposition of the hybrid transposon from the delivered suicide plasmid to a replicon in the target cell was mediated by the cognate transposase encoded on the plasmid at a site external to the transposon. Since the transposase function was not maintained in target cells, such cells were not immune to further transposition rounds. Multiple insertions in the same strain are therefore only limited by the availability of distinct selection markers. The utility of the system was demonstrated with a kanamycin resistance gene as a model foreign insert into Pseudomonas putida and a melanin gene from Streptomyces antibioticus into Klebsiella pneumoniae. Because of the modular nature of the functional parts of the cloning vectors, they can be easily modified and further selection markers can be incorporated. The cloning system described here will be particularly useful for the construction of hybrid bacteria that stably maintain inserted genes, perhaps in competitive situations (e.g., in open systems and natural environments), and that do not carry antibiotic resistance markers characteristic of most available cloning vectors (as is currently required of live bacterial vaccines).     

Complete sequence of the IncP-9 TOL plasmid pWW0 from Pseudomonas putida

The TOL plasmid pWW0 (117 kb) is the best studied catabolic plasmid and the archetype of the IncP-9 plasmid incompatibility group from Pseudomonas. It carries the degradative (xyl) genes for toluenes and xylenes within catabolic transposons Tn4651 and Tn4653. Analysis of the complete pWW0 nucleotide sequence revealed 148 putative open reading frames. Of these, 77 showed similarity to published sequences in the available databases predicting functions for: plasmid replication, stable maintenance and transfer; phenotypic determinants; gene regulation and expression; and transposition. All identifiable transposition functions lay within the boundaries of the 70 kb transposon Tn4653, leaving a 46 kb sector containing all the IncP-9 core functions. The replicon and stable inheritance region was very similar to the mini-replicon from IncP-9 antibiotic resistance plasmid pM3, with their Rep proteins forming a novel group of initiation proteins. pWW0 transfer functions exist as two blocks encoding putative DNA processing and mating pair formation genes, with organizational and sequence similarity to IncW plasmids. In addition to the known Tn4651 and IS1246 elements, two additional transposable elements were identified as well as several putative transposition functions, which are probably genetic remnants from previous transposition events. Genes likely to be responsible for known resistance to ultraviolet light and free radicals were identified. Other putative phenotypic functions identified included resistance to mercury and other metal ions, as well as to quaternary ammonium compounds. The complexity and size of pWW0 is largely the result of the mosaic organization of the transposable elements that it carries, rather than the backbone functions of IncP-9 plasmids.     

Relationships among the streptothricin resistance transposons Tn1825 and Tn1826 and the trimethoprim resistance transposon Tn7

The streptothricin resistance transposons Tn1825 and Tn1826 are closely related, based on physical and genetic characteristics, to the trimethoprim resistance transposon Tn7. These transposons may be considered to be members of a transposon family sharing in common the transposition functions and a basic streptomycin/spectinomycin resistance determinant but differing from one another with respect to particular additional resistance genes inserted to the left of the aadA gene.     

Functional analysis of unique class II insertion sequence IS1071

Various xenobiotic-degrading genes on many catabolic plasmids are often flanked by two copies of an insertion sequence, IS1071. This 3.2-kb IS element has long (110-bp) terminal inverted repeats (IRs) and a transposase gene that are phylogenetically related to those of the class II transposons. However, the transposition mechanism of IS1071 has remained unclear. Our study revealed that IS1071 was only able to transpose at high frequencies in two environmental beta-proteobacterial strains, Comamonas testosteroni and Delftia acidovorans, and not in any of the bacteria examined which belong to the alpha- and gamma-proteobacteria. IS1071 was found to have the functional features of the class II transposons in that (i) the final product of the IS1071 transposition was a cointegrate of its donor and target DNA molecules connected by two directly repeated copies of IS1071, one at each junction; (ii) a 5-bp duplication of the target sequence was observed at the insertion site; and (iii) a tnpA mutation of IS1071 was efficiently complemented by supplying the wild-type tnpA gene in trans. Deletion analysis of the IS1071 IR sequences indicated that nearly the entire region of the IRs was required for its transposition, suggesting that the interaction between the transposase and IRs of IS1071 might be different from that of the other well-characterized class II transposons.