Species differentiation by DNA-modified carbon electrodes using an ac impedimetric approach

A simple and novel electrochemical biosensor based approach is described for differentiating between differing species of fish on the basis of DNA hybridisation events. Screen-printed carbon electrodes modified with a variety of polymers were used to immobilise commercially available DNA in a single-stranded form. AC impedimetric measurements were firstly carried out on these systems and then upon exposure to single-stranded DNA solutions. When the electrode and solution DNA were complementary, a large drop in impedance was measured; this did not occur for non-matching DNA exposures. DNA hybridisation sensors for closely related species of fish were in the first instance developed as a demonstration for this approach. Species of fish such as herrings and salmon could be differentiated by this method. This sensor format offers great promise for many DNA hybridisation applications and lends itself to mass fabrication due to the simplicity and inexpensiveness of the materials and methods used. The hybridisation results were confirmed by use of ellipsometry to measure the characteristics of similar films deposited on silicon substrates.     

Establishment of a semi-automated pathogen DNA isolation from whole blood and comparison with commercially available kits

Molecular methods for bacterial pathogen identification are gaining increased importance in routine clinical diagnostic laboratories. Achieving reliable results using DNA based technologies is strongly dependent on pre-analytical processes including isolation of target cells and their DNA of high quality and purity. In this study a fast and semi-automated method was established for bacterial DNA isolation from whole blood samples and compared to different commercially available kits: Looxster, MolYsis kit, SeptiFast DNA isolation method and standard EasyMAG protocol. The newly established, semi-automated method utilises the EasyMAG device combined with pre-processing steps comprising human cell lysis, centrifugation and bacterial pellet resuspension. Quality of DNA was assessed by a universal PCR targeting the 16S rRNA gene and subsequent microarray hybridisation. The DNA extractions were amplified using two different PCR-mastermixes, to allow comparison of a commercial mastermix with a guaranteed bacterial DNA free PCR mastermix. The modified semi-automated EasyMAG protocol and the Looxster kit gave the most sensitive results. After hybridisation a detection limit of 10¹ to 10² bacterial cells per mL whole blood was achieved depending on the isolation method and microbial species lysed. Human DNA present in the isolated DNA suspension did not interfere with PCR and did not lead to non-specific hybridisation events.     

Immobilisation of DNA to polymerised SU-8 photoresist

SU-8 is an epoxy-based photosensitive resist, which is currently used for a large variety of MEMS and lab-on-a-chip applications. Here, we demonstrate a one-step process to functionalize SU-8 with DNA probes. The immobilisation procedure relies on direct coupling of DNA to SU-8 and resulted in surfaces with functional capture probe densities of approximately 10 fmol/mm(2) as determined by hybridisation assays with fluorescent labelled target molecules. A comparable density of functional capture probes was measured on commercial aldehyde coated glass. DNA probes did not decrease in hybridisation performance after 10 min incubation in water at 98 degrees C prior to hybridisation, indicating a covalent bond between DNA and SU-8. Finally, DNA microarrays of high quality were obtained on SU-8 by contact printing of probe solution directly on SU-8 demonstrating a simple method for the implementation of microarrays in microsystems.     

Dual polarisation interferometry characterisation of DNA immobilisation and hybridisation detection on a silanised support

Dual polarisation interferometry is an analytical technique that allows the simultaneous determination of thickness, density and mass of a biological layer on a sensing waveguide surface in real time. We evaluated, for the first time, the ability of this technique to characterise the covalent immobilisation of single stranded probe DNA and the selective detection of target DNA hybridisation on a silanised support. Two immobilisation strategies have been evaluated: direct attachment of the probe molecule and a more complex chemistry employing a 1,2 homobifunctional crosslinker molecule. With this technique we demonstrate it was possible to determine probe orientation and measure probe coverage at different stages of the immobilisation process in real time and in a single experiment. In addition, by measuring simultaneously changes in thickness and density of the probe layer upon hybridisation of target DNA, it was possible to directly elucidate the impact that probe mobility had on hybridisation efficiency. Direct covalent attachment of an amine modified 19 mer resulted in a thickness change of 0.68 nm that was consistent with multipoint attachment of the probe molecule to the surface. Blocking with BSA formed a dense layer of protein molecules that absorbed between the probe molecules on the surface. The observed hybridisation efficiency to target DNA was approximately 35%. No further significant reorientation of the probe molecule occurred upon hybridisation. The initial thickness of the probe layer upon attachment to the crosslinker molecule was 0.5 nm. Significant reorientation of the probe molecule surface normal occurred upon hybridisation to target DNA. This indicated that the probe molecule had greater mobility to hybridise to target DNA. The observed hybridisation efficiency for target DNA was approximately 85%. The results show that a probe molecule attached to the surface via a crosslinker group is better able to hybridise to target DNA due to its greater mobility.     

Detection of Y-bearing spermatozoa by DNA-DNA in situ hybridisation

In situ hybridisation of a Y chromosome-specific DNA probe to preparations of decondensed spermatozoa revealed approximately 46.7% labelled spermatozoa among 3,900 scored. This is not significantly different from the 50% expected if only the Y chromosome-bearing spermatozoa are hybridised. Control hybridizations of Escherichia coli DNA and salmon testis DNA to decondensed sperm produced no significant labelling, whereas more than 99% of the spermatozoa were heavily labelled after hybridisation to total human DNA. These controls indicate that the methodology described in this paper renders the chromatin accessible for hybridisation and that the 50% hybridisation observed with the Y chromosome DNA probe was specific. In situ hybridisation with the Y probe therefore identifies the Y-bearing spermatozoa, and the protocol described should prove useful in evaluating methods of separating Y-bearing and X-bearing spermatozoa.     

A slot-blot hybridisation method for screening somatic hybrids

A slot-blot method is described that provides rapid and reliable identification of somatic hybrids. Biotin-labelled probes of defined length were prepared from genomic DNA, and calibrated in conjunction with target DNA to allow for differing amounts of biotin incorporation and hybridisation efficiency. The presence of probe DNA was visualised by chemiluminescence detection. Probes of 1 to 5 kbp in length gave optimal discrimination among target DNAs from different potato species. The advantages of this method over existing ones are described.     

Non-isotopic RNA probes. Comparison between different labels and detection systems

Several studies have shown the use of non-radioactive labelled DNA probes for in situ hybridisation, mainly to identify cellular DNA. In this study mRNA in situ hybridisation was performed on rat pituitary with biotinylated complementary (c) RNA probes for rat prolactin and growth hormone (GH), and compared with radioactive 35S-radiolabelled probes. Biotinylated cRNA probes were labelled with either biotin-11-UTP or with allylamine-UTP, the latter method being able to produce a higher yield of labelled RNA. Different detection systems were tested, and hybridisation signal was seen in cells of anterior pituitary with both types of biotinylated probes. The signals were detected using either avidin-biotin-complex with peroxidase (ABC), peroxidase-anti-peroxidase (PAP) or gold-silver methods. ABC peroxidase detected using glucose oxidase-diaminobenzidine (DAB)-nickel solution appeared to be the best method for detecting labelled RNA probes, with very strong signal and low background. The biotinylated probes were comparable in sensitivity to the radiolabelled probes in detecting prolactin and GH mRNAs in the anterior lobe of the rat pituitary. These results indicate an alternative methods of labelling and detection of biotinylated probes which could have a potential role in research and diagnostic techniques.     

Hepatitis B virus DNA and e antigen in serum from blood donors in the United Kingdom positive for hepatitis B surface antigen.

Serum samples from 214 blood donors in the United Kingdom who were carriers of hepatitis B surface antigen (HBsAg) were examined for hepatitis B virus deoxyribonucleic acid (DNA) by DNA:DNA hybridisation and for hepatitis B e antigen (HBeAg) and its antibody. One fifth of the donors carried infectious virus in their circulation. The presence of hepatitis B virus DNA correlated well with that of HBeAg, although hepatitis B virus DNA was found in five serum samples that were negative for HBeAg. It is concluded that analysis of serum samples for hepatitis B virus DNA by hybridisation should be the method of choice for determining whether carriers of HBsAg are infectious.     

Optimisation of an asymmetric polymerase chain reaction assay for the amplification of single-stranded DNA from Wuchereria bancrofti for electrochemical detection

Single-stranded DNA (ssDNA) is a prerequisite for electrochemical sensor-based detection of parasite DNA and other diagnostic applications. To achieve this detection, an asymmetric polymerase chain reaction method was optimised. This method facilitates amplification of ssDNA from the human lymphatic filarial parasite Wuchereria bancrofti. This procedure produced ssDNA fragments of 188 bp in a single step when primer pairs (forward and reverse) were used at a 100:1 molar ratio in the presence of double-stranded template DNA. The ssDNA thus produced was suitable for immobilisation as probe onto the surface of an Indium tin oxide electrode and hybridisation in a system for sequence-specific electrochemical detection of W. bancrofti. The hybridisation of the ssDNA probe and target ssDNA led to considerable decreases in both the anodic and the cathodic currents of the system''s redox couple compared with the unhybridised DNA and could be detected via cyclic voltammetry. This method is reproducible and avoids many of the difficulties encountered by conventional methods of filarial parasite DNA detection; thus, it has potential in xenomonitoring.     

Expression of a clone specific DNA sequence from Staphylococcus aureus in Escherichia coli.

Staphylococcus aureus produces a large number of factors thought to contribute to virulence, although the precise role of some of these individual factors is not clearly defined. To investigate whether specific virulence factors might be responsible for the selection and dominance of certain genotypes of methicillin- and multiply resistant S. aureus (MRSA), the method of subtractive hybridisation was used to identify conserved DNA sequences associated with the clinical, clonal populations of S. aureus. The findings described in this report indicate that the method of subtractive hybridisation is a valuable tool to identify clone specific virulence factors, which might be of potential as diagnostic markers and as alternative vaccine targets.     

Evaluation of the usefulness of various PCR method variations and nucleic acid hybridization for CMV infection in immunosuppressed patients

In diagnosis of CMV infection various laboratory methods are used. The methods based on detection of viral nucleic acids have been introduced routinely in many laboratories. The aim of this study was to compare nucleic acid hybridisation method and various variants of PCR methods with respect to their ability to detect CMV DNA. The studied material comprised 60 blood samples from 19 patients including 13 renal transplant recipients and 6 with acute leukaemia. The samples were subjected to hybridisation (Murex Hybrid Capture System CMV DNA) and PCR carried out in 3 variants: with one pair of primers (single PCR), nested PCR and Digene SHARP System with detection of PCR product using a genetic probe in ELISA system. The sensitivity of the variants ranged from 10(0) particles of viral DNA in nested PCR to 10(2) in single PCR. The producer claimed the sensitivity of the hybridisation test to be 3 x 10(5) and it seems to be sufficient for detection of CMV infection. The obtained results show that sensitivity of hybridisation was comparable to that of single PCR and the possibility of obtaining quantitative results makes it superior, on efficacy of antiviral therapy, especially in monitoring CMV infection in immunossuppressed patients and in following the efficacy of antiviral treatment.     

Cohort analysis of a single nucleotide polymorphism on DNA chips

A method has been developed to determine SNPs on DNA chips by applying a flow-through bioscanner. As a practical application we demonstrated the fast and simple SNP analysis of 24 genotypes in an array of 96 spots with a single hybridisation and dissociation experiment. The main advantage of this methodical concept is the parallel and fast analysis without any need of enzymatic digestion. Additionally, the DNA chip format used is appropriate for parallel analysis up to 400 spots. The polymorphism in the gene of the human phenol sulfotransferase SULT1A1 was studied as a model SNP. Biotinylated PCR products containing the SNP (The SNP summary web site: ) (mutant) and those containing no mutation (wild-type) were brought onto the chips coated with NeutrAvidin using non-contact spotting. This was followed by an analysis which was carried out in a flow-through biochip scanner while constantly rinsing with buffer. After removing the non-biotinylated strand a fluorescent probe was hybridised, which is complementary to the wild-type sequence. If this probe binds to a mutant sequence, then one single base is not fully matching. Thereby, the mismatched hybrid (mutant) is less stable than the full-matched hybrid (wild-type). The final step after hybridisation on the chip involves rinsing with a buffer to start dissociation of the fluorescent probe from the immobilised DNA strand. The online measurement of the fluorescence intensity by the biochip scanner provides the possibility to follow the kinetics of the hybridisation and dissociation processes. According to the different stability of the full-match and the mismatch, either visual discrimination or kinetic analysis is possible to distinguish SNP-containing sequence from the wild-type sequence.     

Non-isotopic RNA probes

Summary Several studies have shown the use of non-radioactive labelled DNA probes for in situ hybridisation, mainly to identify cellular DNA. In this study mRNA in situ hybridisation was performed on rat pituitary with biotinylated complementary (c) RNA probes for rat prolactin and growth hormone (GH), and compared with radioactive ³⁵S-radiolabelled probes. Biotinylated cRNA probes were labelled with either biotin-11-UTP or with allylamine-UTP, the latter method being able to produce a higher yield of labelled RNA. Different detection systems were tested, and hybridisation signal was seen in cells of anterior pituitary with both types of biotinylated probes. The signals were detected using either avidin-biotin-complex with peroxidase (ABC), peroxidase-anti-peroxidase (PAP) or gold-silver methods. ABC peroxidase detected using glucose oxidase-diaminobenzidine (DAB)-nickel solution appeared to be the best method for detecting labelled RNA probes, with very strong signal and low background. The biotinylated probes were comparable in sensitivity to the radiolabelled probes in detecting prolactin and GH mRNAs in the anterior lobe of the rat pituitary. These results indicate an alternative methods of labelling and detection of biotinylated probes which could have a potential role in research and diagnostic techniques.     

Hybridisation of surface-immobilised single-stranded oligonucleotides and polymer monitored by surface plasmon resonance

We have investigated the hybridisation of thiol-modified single-stranded DNA embedded in a polyacrylamide layer through the technique of surface plasmon resonance (SPR). Kinetic studies were carried out by two different immobilisation methods: (a) SH-ssDNA was firstly attached on gold and the remaining free space was filled with polymer and (b) SH-ssDNA and the polymer was attached onto the surface from the same solution. The immobilisation methods were compared for various concentrations of SH-ssDNA. Hybridisation was dependent on both the immobilisation method and the concentration of the components. The highest hybridisation was obtained when SH-ssDNA and the polymer was immobilised from the same solution at low SH-ssDNA concentration or when high concentrations of oligos were spread onto the surface and the surface was post-treated with polymer. The target response corresponded to a surface coverage of 100+/-15 ng/cm2. The same surface coverage on hybridisation was also obtained when low concentration of SH-ssDNA and polymer was attached onto the surface from the same solution. The non-specific binding of sample DNA was very low at optimal concentrations due to the polymer and the hybridisation was linearly dependent on target concentration.     

Stable transformation of the moss Physcomitrella patens

Summary We report the stable transformation of Physcomitrella patens to either G418 or hygromycin B resistance following polyethylene glycol-mediated direct DNA uptake by protoplasts. The method described in this paper was used successfully in independent experiments carried out in our two laboratories. Transformation was assessed by the following criteria: selection of antibiotic-resistant plants, mitotic and meiotic stability of phenotypes after removal of selective pressure and stable transmission of the character to the offspring; Southern hybridisation analysis of genomic DNA to show integration of the plasmid DNA; segregation of the resistance gene following crosses with antibiotic-sensitive strains; and finally Southern hybridisation analysis of both resistant and sensitive progeny. In addition to stable transformants, a heterogeneous class of unstable transformants was obtained.     

The location of four human satellite DNAs on human chromosomes.

In situ hybridisation was carried out with ³H-cRNAs transcribed from four human satellite DNAs. The human metaphase chromosomes used were stained with quinacrine and photographed prior to hybridisation. This allowed accurate karyotyping of the autoradiographs. A method of quantitative analysis of grain distribution permitted identification of minor sites of hybridisation which could be distinguished from purely random grains. The hybridisation patterns for each of the transcribed satellite cRNAs were similar, with the C-band of chromosome 9 and the Y chromosome being the most heavily labelled sites. Other detectable sites of hybridisation were the centromeric regions of chromosomes 1, 5, 7, 10, 12, 13, 14, 15, 17, 20, 21 and 22. The cRNA transcribed from DNA satellite II, however, was the only one to hybridise to the centromere region of chromosome 16. The evolution of the human satellite DNAs and the validity of current models of satellite DNA function are discussed in the light of the present results.     

Modification of DNA with dihydrazide of succinic acid for preparation of hybridization probes

A two-step chemical method of introduction of nonradioactive labels in DNA was proposed. At first step DNA is modified by succinic dihydrazide at pH 5.0 and 95 degrees C, or at pH 4.5 and 37 degrees C in presence of sodium bisulfite. Then FITC or biotin are joined to the hydrazide groups. DNA modified in this way were shown to be effective hybridisation probes.     

A microarray-based high throughput molecular marker genotyping method: the tagged microarray marker (TAM) approach

A microarray-based method has been developed for scoring thousands of DNAs for a co-dominant molecular marker on a glass slide. The approach was developed to detect insertional polymorphism of transposons and works well with single nucleotide polymorphism (SNP) markers. Biotin- terminated allele-specific PCR products are spotted unpurified onto streptavidin-coated glass slides and visualised by hybridisation of fluorescent detector oligonucleotides to tags attached to the allele- specific PCR primers. Two tagged primer oligonucleotides are used per locus and each tag is detected by hybridisation to a concatameric DNA probe labelled with multiple fluorochromes.     

Characterisation of rye B chromosome DNA by DNA/DNA hybridisation

The DNAs of wheat and rye plants with rye B chromosomes have been compared with wheat, rye and oats DNAs by DNA/DNA hybridisation. The presence of DNA from B chromosomes made no significant difference to the proportion of repeated sequence DNA. The repeated sequence fractions of these cereal DNAs were quantitatively divided into eight different groups on the basis of the amount of DNA/DNA hybridisation occurring between the different DNAs. Rye A and B chromosomes contained similar proportions of three of the groups. These results, together with estimates of the thermal stabilities of all the renatured DNA duplexes suggest that rye B chromosome DNA is very similar to rye A chromosome DNA in the proportion and heterogeneity of its repeated sequences.     

The telomeric region is excluded from nucleosomal fragmentation during apoptosis, but the bulk nuclear chromatin is randomly degraded

Characteristic steps during cellular apoptosis are the induction of chromatin condensation and subsequent DNA fragmentation, finally leading to the formation of oligomers of nucleosomes. We have examined the kinetics and local distribution of this nucleosomal fragmentation within different genomic regions. For the induction of apoptosis, HL60 cells were treated with the water-soluble camptothecin derivative topotecan (a topoisomerase I inhibitor). The genomic origin of the fragments was analysed by Southern blot hybridisation of the cleaved DNA. In these experiments we observed similar hybridisation patterns of the fragmented DNA, indicating a random and synchronous cleavage of the nuclear chromatin. However, hybridisation with a telomeric probe revealed that, in contrast to the other analysed genomic regions, the telomeric chromatin was not cleaved into nucleosomal fragments despite our observation that the telomeric DNA in HL60 cells is organised in nucleosomes. We determined just a minor shortening of the telomeric repeats early during apoptosis. These observations suggest that telomeric chromatin is excluded from internucleosomal cleavage during apoptosis.