Lysis protein T of bacteriophage T4

Summary Lysis protein T of phage T4 is required to allow the phage's lysozyme to reach the murein layer of the cell envelope and cause lysis. Using fusions of the cloned gene t with that of the Escherichia coli alkaline phosphatase or a fragment of the gene for the outer membrane protein OmpA, it was possible to identify T as an integral protein of the plasma membrane. The protein was present in the membrane as a homooligomer and was active at very low cellular concentrations. Expression of the cloned gene t was lethal without causing gross leakiness of the membrane. The functional equivalent of T in phage is protein S. An amber mutant of gene S can be complemented by gene t, although neither protein R of (the functional equivalent of T4 lysozyme) nor S possess any sequence similarity with their T4 counterparts. The murein-degrading enzymes (including that of phage P22) have in common a relatively small size (molecular masses of ca. 18 000) and a rather basic nature not exhibited by other E. coli cystosolic proteins. The results suggest that T acts as a pore that is specific for this type of enzyme.     

Studies on the structure, protein composition and aseembly of the neck of bacteriophage T4

We have developed an osmotic shock procedure which disconnects the tail from the head of intact bacteriophage T4, leaving the neck region attached to the tail. Purification of these necked tails permitted detailed structural observations of the neck and the collar/whisker complex attached to it, as well as comparison by gel electrophoresis with tails lacking the neck. Five or six neck proteins were found: N1 (M_r = 52,000; 39 copies/phage) is the product of the wac³ gene (Pwac), forms both the collar and six whiskers as a multimeric fibrous protein, and probably assembles onto phage after head to tail joining; N2 (M_r= 35,000; 5 to 6 copies/phage), N3 (M_r= 33,000; 17 copies/phage) identified here as P13, and N6 (M_r= 28,000; 10 to 11 copies/phage) are all assembled in heads prior to tail joining; N4 (M_r= 32,000; 6 to 9 copies/phage) is unusual in that it is present in wac or wac⁺ phage and necked tails but is absent from purified heads; N5 (M_r =29,000) is probably P14 and like N4 is not found in heads. However, while we find one to two copies of N5 per necked tail, we have not observed it in phage.An aberrant neck structure called the extension assembles on the distal end of the tail connector late (after 33 min, 30 °C) in head-defective, mutant-infected cells. The extension contains five of the six neck proteins (N2 is absent), and blocks head to tail joining in vitro. Mutations in genes 13 and 14, and the double mutant 49:Wac block extension assembly.Other results show that the wac mutant E727J is an amber lesion, and that Pwac can assemble on collarless, wac phage in vitro.     

Characterization and crystallization of the helicase domain of bacteriophage T7 gene 4 protein.

Limited proteolysis of bacteriophage T7 primase/helicase with endoproteinase Glu-C produces several proteolytic fragments. One of these fragments, which is derived from the C-terminal region of the protein, was prepared and shown to retain helicase activity. This result supports a model in which the gene 4 proteins consist of functionally separable domains. Crystals of this C-terminal fragment of the protein have been obtained that are suitable for X-ray diffraction studies.     

Three-dimensional structure of bacteriophage T4 baseplate

The baseplate of bacteriophage T4 is a multiprotein molecular machine that controls host cell recognition, attachment, tail sheath contraction and viral DNA ejection. We report here the three-dimensional structure of the baseplate-tail tube complex determined to a resolution of 12 A by cryoelectron microscopy. The baseplate has a six-fold symmetric, dome-like structure approximately 520 A in diameter and approximately 270 A long, assembled around a central hub. A 940 A-long and 96 A-diameter tail tube, coaxial with the hub, is connected to the top of the baseplate. At the center of the dome is a needle-like structure that was previously identified as a cell puncturing device. We have identified the locations of six proteins with known atomic structures, and established the position and shape of several other baseplate proteins. The baseplate structure suggests a mechanism of baseplate triggering and structural transition during the initial stages of T4 infection.     

Changes in the secondary structure bacteriophage T4 envelope protein after its polymerization

Circular dichroism (CD) spectra of the structural protein of the bacteriophage T4 sheath (gp 18) in a monomeric native state, helices, polysheaths and contracted sheaths were measured in the range 184-310 nm. The secondary structure of the protein studied was calculated from the spectra in the range 190-240 nm according to Provencher and Gl?ckner. It has been shown that the polymerization is proceeded without change of the alpha-helical content in the secondary structure of gp 18: estimated alpha-helix in monomeric gp 18, helices and polysheaths was 39%. The beta-form content in monomeric gp 18, helices and polysheaths was 33, 32 and 37%, respectively. Tail sheath contraction is attended by a 14% decrease in gp 18 alpha-helicity and a 5% increase in its beta-form content.     

Primary structure of the tail sheath protein of bacteriophage T4 and its gene

Complete sequence determination of gene 18 encoding the tail sheath protein was carried out mainly by the Maxam-Gilbert method. Approximately 40 peptides contained in a tryptic digest and a lysyl endopeptidase digest of gp 18 were isolated by reversed-phase high-performance liquid chromatography. All the peptides were identified along the nucleotide sequence of gene 18 based on the amino acid compositions. These peptides cover 88% of the total primary structure. Furthermore, the amino acid sequences of 9 of the 40 peptides were determined by a gas-phase protein sequencer; one of them turned to be the N-terminal one. The C-terminal peptide in the tryptic digest was isolated from the unadsorbed fraction of affinity chromatography on immobilized anhydrotrypsin and the amino acid sequence was also determined. Thus, the complete primary structure of gp 18 was determined; it has 658 amino acid residues and a molecular weight of 71,160.This article was presented during the proceedings of the International Conference on Macromolecular Structure and Function, held at the National Defence Medical College, Tokorozawa, Japan, December 1985.     

Solution structure of bacteriophage T4D and icosahedral capsid geometry visualized in freeze-fractured, deep-etched replicas

The prolate icosahedral capsid geometry of wild type bacteriophage T4D has been determined by direct visualization of the triangular faces in stereoimages of transmission electron micrographs of phage particles. Bacteriophage T4 was prepared for transmission electron microscopy (TEM) following a protocol of freeze-fracturing, deep-etching (FDET) and replication by vertical deposition (80 degrees angle) of a thin platinum-carbon (Pt-C) metal layer of 1.01 nm. From direct statistical measurements of the ratio of the head length to width and of stereometric angles on T4 heads, we have estimated a Q number of 21. This confirms previous indirect studies on T4 and agrees with determinations on bacteriophage T2. Many of the structural features of T4 observed in FDET preparations differ significantly from those observed by classical negative staining methods for TEM imaging. Most important among the differences are the conformation of the baseplate (a closed rosebud) and the positioning of the tail fibers (retracted). The retracted position of the tail fibers in the FDET preparations has been confirmed by negatively staining phage previously fixed suspended in solution with 2% glutaraldehyde. The FDET protocols appear to reveal important structural features not seen in negative stained preparations. These have implications for bacteriophage T4 conformation in solution, viral assembly and phage conformation states prior to tail contraction and DNA ejection.     

Solution structure of the toluene 4-monooxygenase effector protein (T4moD)

Toluene 4-monooxygenase (T4MO) from Pseudomonas mendocina catalyzes the NADH- and O(2)-dependent hydroxylation of toluene to form p-cresol. The complex consists of an NADH oxidoreductase (T4moF), a Rieske ferredoxin (T4moC), a diiron hydroxylase [T4moH, with (alphabetagamma)(2) quaternary structure], and a catalytic effector protein (T4moD). The solution structure of the 102-amino acid T4moD effector protein has been determined from 2D and 3D (1)H, (13)C, and (15)N NMR spectroscopic data. The structural model was refined through simulated annealing by molecular dynamics in torsion angle space (DYANA software) with input from 1467 experimental constraints, comprising 1259 distance constraints obtained from NOEs, 128 dihedral angle constraints from J-couplings, and 80 hydrogen bond constraints. Of 60 conformers that met the acceptance criteria, the 20 that best satisfied the input constraints were selected to represent the solution structure. With exclusion of the ill-defined N- and C-terminal segments (Ser1-Asn11 and Asp99-Met102), the atomic root-mean-square deviation for the 20 conformers with respect to the mean coordinates was 0.71 A for the backbone and 1.24 A for all non-hydrogen atoms. The secondary structure of T4moD consists of three alpha-helices and seven beta-strands arranged in an N-terminal betaalphabetabeta and a C-terminal betaalphaalphabetabetabeta domain topology. Although the published NMR structures of the methane monooxygenase effector proteins from Methylosinus trichosporium OB3b and Methylococcus capsulatus (Bath) have a similar secondary structure topology, their three-dimensional structures differ from that of T4moD. The major differences in the structures of the three effector proteins are in the relative orientations of the two beta-sheets and the interactions between the alpha-helices in the two domains. The structure of T4moD is closer to that of the methane monooxygenase effector protein from M. capsulatus (Bath) than that from M. trichosporium OB3b. The specificity of T4moD as an effector protein was investigated by replacing it in reconstituted T4MO complexes with effector proteins from monooxygenases from other bacterial species: Pseudomonas pickettii PKO1 (TbuV, toluene 3-monooxygenase); Pseudomonas species JS150 (TbmC, toluene 2-monooxygenase); and Burkeholderia cepacia G4 (S1, toluene 2-monooxygenase). The results showed that the closely related TbuV effector protein (55% sequence identity) provided partial activation of the complex, whereas the more distantly related TbmC (34% sequence identity) and S1 (29% sequence identity) did not. The (1)H NMR chemical shifts of the side-chain amide protons of Asn34, a conserved, structurally relevant amino acid, were found to be similar in spectra of effector proteins T4moD and TbuV but not in the spectrum of TbmC. This suggests that the region around Asn34 may be involved in structural aspects contributing to functional specificity.