Macrofibril assembly in trichocyte (hard alpha-) keratins

Early electron microscope studies of developing wool and hair established that trichocyte (hard alpha-) keratin fibers have a composite structure in which filaments, subsequently shown to belong to the class of intermediate filaments (IF), were embedded in a matrix of sulfur-rich proteins. These studies also showed that the IF aggregate in a variety of ways to form what have been termed macrofibrils. Assembly into sheets appears to be an important initial factor in aggregation, and in the present contribution the structural principles governing sheet formation are formulated and specific models for the interaction between neighboring IF in a sheet are proposed, based on existing X-ray diffraction, electron microscope, and crosslinking data. All of the trichocyte keratins so far examined by electron microscopy exhibit similar filament/matrix textures and the mechanism of sheet formation proposed here is likely to have general applicability.     

Structural changes in the trichocyte intermediate filaments accompanying the transition from the reduced to the oxidized form

Earlier studies established that substantial changes take place in the three-dimensional structure of the newly assembled trichocyte keratin intermediate filament (IF) during the oxidation process (Wang, H., Parry, D.A.D., Jones, L.N., Idler, W.W., Marekov, L.N., Steinert, P.M. 2000. In vitro assembly and structure of trichocyte keratin intermediate filaments: A novel role for stabilization by disulfide bonding. J. Cell Biol. 151, 1459-1468). The present contribution describes a re-examination of previous data in which more accurate values for the axial dispositions of the molecules have been obtained to yield the most detailed picture yet available of the structural changes that occur in vivo. In particular, it is shown that in the newly assembled (reduced) IF the crosslinking data are consistent with the detailed (8+0) model suggested earlier (Fraser, R.D.B., Parry, D.A.D. 2005. The three-dimensional structure of trichocyte (hard alpha-) keratin intermediate filaments: Features of the molecular packing deduced from the sites of induced crosslinks. J. Struct. Biol. 151, 171-181), in which eight four-chain protofilaments are arranged on an annular ring. For oxidized IF, however, the existing X-ray data require a periodic imperfection in the surface lattice which is substantial in the case of an (8+0) model and hence difficult to explain. In contrast, an alternative (7+1) model (Fraser, R.D.B., MacRae, T.P., Parry, D.A.D., Suzuki, E. 1986. Intermediate filaments in alpha-keratin. Proc. Natl. Acad. Sci. USA 83, 1179-1183) requires only a minor imperfection, and it is suggested that this is associated with the central protofilament. This suggestion is shown to be compatible with both the crosslinking data and a model for the axial distribution of electron density derived from the meridional X-ray pattern. In addition, evidence from an X-ray diffraction study of the follicle (Er Rafik, M., Briki, F., Burghammer, M., Doucet, J. 2006. In vivo formation of the hard alpha-keratin intermediate filament along a hair follicle: Evidence for structural polymorphism. J. Struct. Biol. 154, 79-88) and electron microscope studies of isolated reduced IF (Watts, N.R., Jones, L.N., Cheng, N., Wall, J.S., Parry, D.A.D., Steven, A.C. 2002. Cryo-electron microscopy of trichocyte (hard alpha-keratin) intermediate filaments reveals a low-density core. J. Struct. Biol. 137, 109-118) have been combined with earlier X-ray studies to give an estimate of the reduction in diameter that occurs in the IF due to the lateral reorganization of the protofilaments during the oxidation process. It has also been shown that the local coiled-coil geometry in the immediate vicinity of the contributing cysteine residues is necessarily disrupted, a feature consistent with the breadths of the near-equatorial layer lines in the X-ray diffraction pattern that indicate an average coherent length of coiled coil of only about 5 nm.     

Structural changes in trichocyte keratin intermediate filaments during keratinization

The so-called hard alpha-keratins, such as quill and hair, have a composite structure in which intermediate filaments (IF) are embedded in a sulfur-rich matrix. Recent studies of these trichocyte keratin IF have revealed that substantial changes in the molecular architecture take place when oxidation of the cysteine residues occurs as part of the terminal differentiation/keratinization process. Recent cryoelectron microscope studies suggest that the IF has a tubular structure prior to keratinization, but transmission electron micrographs of thin sections of fully keratinized fibers exhibit a "ring-core" structure. In the present contribution we develop a generic model for the IF in the reduced state based on cross-linking studies and discuss two possibilities for the way in which this structure may be modified during the keratinization process.     

Morphological analysis of glutaraldehyde-fixed vimentin intermediate filaments and assembly-intermediates by atomic force microscopy

Atomic force microscopy (AFM) was used to study the morphology of vimentin intermediate filaments (IFs) and their assembly intermediates. At each time after initiation of IF assembly in vitro of recombinant mouse vimentin, the sample was fixed with 0.1% glutaraldehyde and then applied to AFM analysis. When mature vimentin IFs were imaged in air on mica, they appeared to have a width of approximately 28 nm, a height of approximately 4 nm and a length of several micrometers. Taking into account the probe tip's distortion effect, the exact width was evaluated to be approximately 25 nm, suggesting that the filaments flatten on the substrate rather than be cylindrical with a diameter of approximately 10 nm. Vimentin IFs in air clearly demonstrated approximately 21-nm repeating patterns along the filament axis. The three-dimensional profiles of vimentin IFs indicated that the characteristic patterns were presented by repeating segments with a convex surface. The repeating patterns close to 21 nm were also observed by AFM analysis in a physiological solution condition, suggesting that the segments along the filaments are an intrinsic substructure of vimentin IFs. In the course of IF assembly, assembly intermediates were analyzed in air. Many short filaments with a full-width and an apparent length of approximately 78 nm (evaluated length approximately 69 nm) were observed immediately after initiation of the assembly reaction. Interestingly, the short full-width filaments appeared to be composed of the four segments. Further incubation enabled the short full-width filaments to anneal longitudinally into longer filaments with a distinct elongation step of approximately 40 nm, which corresponds to the length of the two segments. To explain these observations, we propose a vimentin IF formation model in which vimentin dimers are supercoiling around the filament axis.     

In vitro assembly properties of mutant and chimeric intermediate filament proteins: insight into the function of sequences in the rod and end domains of IF

The factors and mechanisms regulating assembly of intermediate filament (IF) proteins to produce filaments with their characteristic 10 nm diameter are not fully understood. All IF proteins contain a central rod domain flanked by variable head and tail domains. To elucidate the role that different domains of IF proteins play in filament assembly, we used negative staining and electron microscopy (EM) to study the in vitro assembly properties of purified bacterially expressed IF proteins, in which specific domains of the proteins were either mutated or swapped between a cytoplasmic (mouse neurofilament-light (NF-L) subunit) and nuclear intermediate filament protein (human lamin A). Our results indicate that filament formation is profoundly influenced by the composition of the assembly buffer. Wild type (wt) mouse NF-L formed 10 nm filaments in assembly buffer containing 175 mM NaCl, whereas a mutant deleted of 18 NH2-terminal amino acids failed to assemble under similar conditions. Instead, the mutant assembled efficiently in buffers containing CaCl2 > or = 6 mM forming filaments that were 10 times longer than those formed by wt NF-L, although their diameter was significantly smaller (6-7 nm). These results suggest that the 18 NH2-terminal sequence of NF-L might serve two functions, to inhibit filament elongation and to promote lateral association of NF-L subunits. We also demonstrate that lengthening of the NF-L rod domain, by inserting a 42 aa sequence unique to nuclear IF proteins, does not compromise filament assembly in any noticeable way. Our results suggests that the known inability of nuclear lamin proteins to assemble into 10 nm filaments in vitro cannot derive solely from their longer rod domain. Finally, we demonstrate that the head domain of lamin A can substitute for that of NF-L in filament assembly, whereas substitution of both the head and tail domains of lamins for those of NF-L compromises assembly. Therefore, the effect of lamin A "tail" domain alone, or the synergistic effect of lamin "head" and the "tail" domains together, interferes with assembly into 10-nm filaments.     

In vitro assembly and structure of trichocyte keratin intermediate filaments: a novel role for stabilization by disulfide bonding

Intermediate filaments (IF) have been recognized as ubiquitous components of the cytoskeletons of eukaryotic cells for 25 yr. Historically, the first IF proteins to be characterized were those from wool in the 1960s, when they were defined as low sulfur keratins derived from "microfibrils." These proteins are now known as the type Ia/type IIa trichocyte keratins that constitute keratin IF of several hardened epithelial cell types. However, to date, of the entire class of >40 IF proteins, the trichocyte keratins remain the only ones for which efficient in vitro assembly remains unavailable. In this paper, we describe the assembly of expressed mouse type Ia and type IIa trichocyte keratins into IF in high yield. In cross-linking experiments, we document that the alignments of molecules within reduced trichocyte IF are the same as in type Ib/IIb cytokeratins. However, when oxidized in vitro, several intermolecular disulfide bonds form and the molecular alignments rearrange into the pattern shown earlier by x-ray diffraction analyses of intact wool. We suggest the realignments occur because the disulfide bonds confer substantially increased stability to trichocyte keratin IF. Our data suggest a novel role for disulfide bond cross linking in stabilization of these IF and the tissues containing them.     

Detection of dense intra- and perinuclear 10 nm filament systems by whole mount and embedment-free electron microscopy in several species of the green algal order Dasycladales

Summary In contrast to the immense body of evidence supporting the occurrence of intermediate filament (IF) proteins in the animal kingdom, there is only limited information on their distribution in plants. Nevertheless, a number of immunocytochemical and electron microscopical observations indicate that particularly in higher plant cells IFs contribute to the construction of the cyto- and karyoskeleton. Here we show by whole mount electron microscopy of the giant nuclei extruded together with adhering cytoplasm from the rhizoids of some species of the algal order Dasycladales that cytoplasmic 10 nm filament networks also occur in unicellular, mononucleated green organisms of early evolutionary origin. The filament systems were associated with the residual nuclear envelope which consisted of a dense arrangement of pore complexes suspended by a meshwork of short 5 to 6 nm filaments; structurally it was very similar to the nuclear envelopes obtained from mammalian cells. When the Dasycladales nuclei were processed side by side with mouse skin fibroblasts, the algal filament systems were physically almost indistinguishable from the mammalian vimentin filament network. Embedment-free thin sections of rhizoids have not only confirmed the existence of the perinculear 10 nm filaments and their seamless association with the nuclear envelope, but have demonstrated the existence of an extensive intranuclear meshwork of 10 nm filaments. The latter were morphologically indistinguishable from the perinuclear 10 nm filaments and seem to be connected to these via the nuclear envelope to form a continuum. Among a variety of antibodies directed against mammalian IF proteins, only polyclonal anti-mouse lamin B antibodies decorated the cytoplasmic filaments of the Dasycladales cells. Surprisingly, none of the antibodies decorated the thinner filaments of the nuclear envelope, which possibly represent the nuclear lamina. In accord with this observation, one anti-lamin B antibody recognized in Western blot analysis of a urea extract ofAcetabularia acetabulum rhizoids three polypeptides with M_rs of approximately 47,000, 64,000, and 76,000. The proteins did not react with the -IFA antibody. Since the Dasycladales have a fossil record of nearly 600 million years — an extant genus, Acicularia, also investigated here, evolved about 170 million years ago -, the molecular characterization of the subunit proteins of their cytoplasmic filament systems might throw further light on the evolution and biological role of IFs.Dedicated to Professor Sir Henry Harris on the occasion of his 70th birthday     

Isolation of intermediate filament assemblies from human hair follicles

We used developing human hair follicle cells for the isolation of hard alpha-keratin structural components. Intracellular dispersions examined by electron microscopy contained both individual alpha-keratin filaments and the tactoid-like filament assemblies observed in situ organized along subfibrillar arms of macrofibrils. The assemblies of average width 47 nm were composed of closely packed alpha-keratin filaments and originated from the initial filament arrays observed in sections of developing mammalian hair follicles. We have distinguished two types of assemblies: the para-like or hexagonally packed and the ortho-like spiral or whorl type. Axial banding extended across the width of filament assemblies, which suggested that hard alpha-keratin filaments pack in lateral register and form a lattice that contains interfilamentous bridges. We observed axial banding patterns with periods ranging from 20 to 22 nm, consistent with the 22-nm periodic structure deduced from x-ray diffraction studies and present in models proposed for hard alpha-keratin and other intermediate filaments. Preliminary biochemical studies of filaments and filament assemblies indicate that they consist of the closely related group of proteins (low-sulfur proteins) ubiquitous among extracts of hard mammalian keratins. Isolated hard alpha-keratin filament assemblies provide a new and valuable structural entity for investigating the assembly mechanisms involved in the formation of the filament-matrix framework found in hard mammalian keratin appendages.     

Class VI myosin moves processively along actin filaments backward with large steps.

Among a superfamily of myosin, class VI myosin moves actin filaments backwards. Here we show that myosin VI moves processively on actin filaments backwards with large ( approximately 36 nm) steps, nevertheless it has an extremely short neck domain. Myosin V also moves processively with large ( approximately 36 nm) steps and it is believed that myosin V strides along the actin helical repeat with its elongated neck domain that is critical for its processive movement with large steps. Myosin VI having a short neck cannot take this scenario. We found by electron microscopy that myosin VI cooperatively binds to an actin filament at approximately 36 nm intervals in the presence of ATP, raising a hypothesis that the binding of myosin VI evokes "hot spots" on actin filaments that attract myosin heads. Myosin VI may step on these "hot spots" on actin filaments in every helical pitch, thus producing processive movement with 36 nm steps.     

Filensin and phakinin form a novel type of beaded intermediate filaments and coassemble de novo in cultured cells

The fiber cells of the eye lens possess a unique cytoskeletal system known as the "beaded-chain filaments" (BFs). BFs consist of filensin and phakinin, two recently characterized intermediate filament (IF) proteins. To examine the organization and the assembly of these heteropolymeric IFs, we have performed a series of in vitro polymerization studies and transfection experiments. Filaments assembled from purified filensin and phakinin exhibit the characteristic 19-21-nm periodicity seen in many types of IFs upon low angle rotary shadowing. However, quantitative mass-per-length (MPL) measurements indicate that filensin/phakinin filaments comprise two distinct and dissociable components: a core filament and a peripheral filament moiety. Consistent with a nonuniform organization, visualization of unfixed and unstained specimens by scanning transmission electron microscopy (STEM) reveals the the existence of a central filament which is decorated by regularly spaced 12-15-nm-diam beads. Our data suggest that the filamentous core is composed of phakinin, which exhibits a tendency to self-assemble into filament bundles, whereas the beads contain filensin/phakinin hetero-oligomers. Filensin and phakinin copolymerize and form filamentous structures when expressed transiently in cultured cells. Experiments in IF-free SW13 cells reveal that coassembly of the lens-specific proteins in vivo does not require a preexisting IF system. In epithelial MCF-7 cells de novo forming filaments appear to grow from distinct foci and organize as thick, fibrous laminae which line the plasma membrane and the nuclear envelope. However, filament assembly in CHO and SV40-transformed lens- epithelial cells (both of which are fibroblast-like) yields radial networks which codistribute with the endogenous vimentin IFs. These observations document that the filaments formed by lens-specific IF proteins are structurally distinct from ordinary cytoplasmic IFs. Furthermore, the results suggest that the spatial arrangement of filensin/phakinin filaments in vivo is subject to regulation by host- specific factors. These factors may involve cytoskeletal networks (e.g., vimentin IFs) and/or specific sites associated with the cellular membranes.     

Three-dimensional architecture of macrofibrils in the human scalp hair cortex

Human scalp hairs are comprised of a central cortex enveloped by plate-like cuticle cells. The elongate cortex cells of mature fibres are composed primarily of macrofibrils-bundles of hard-keratin intermediate filaments (IFs) chemically cross-linked within a globular protein matrix. In wool, three cell types (ortho-, meso- and paracortex) contain macrofibrils with distinctly different filament arrangements and matrix fractions, but in human hair macrofibril-cell type relationships are less clear. Here we show that hair macrofibrils all have a similar matrix fraction (∼0.4) and are typically composed of a double-twist architecture in which a central IF is surrounded by concentric rings of tangentially-angled IFs. The defining parameter is the incremental angle increase (IF-increment) between IFs of successive rings. Unlike the wool orthocortex, hair double-twist macrofibrils have considerable inter-macrofibril variation in IF increment (0.05–0.35°/nm), and macrofibril size and IF increment are negatively correlated. Correspondingly, angular difference between central and outer-most IFs is up to 40° in small macrofibrils, but only 5–10° in large macrofibrils. Single cells were observed containing mixtures of macrofibrils with different diameters. These new observations advance our understanding of the nano-level and cell-level organisation of human hair, with implications for interpretation of structure with respect the potential roles of cortex cell types in defining the mechanical properties of hair.     

Patterns of expression of trichocytic and epithelial cytokeratins in mammalian tissues. I. Human and bovine hair follicles

The cytokeratin family of intermediate filament (IF) proteins can be grouped into the epithelial polypeptides ("soft alpha-keratins"), of which at least 19 exist in the various human epithelia, and the hair-type cytokeratins ("hard alpha-keratins"), which are typical of trichocytes, i.e., the living hair-forming cells. We have recently shown [34] that the hair follicles from diverse mammalian species contain a set of eight major cytokeratin polypeptides, four each of the acidic (type I) and the basic (type II) subfamily, which are different from all known epithelial cytokeratins. In addition, we have identified two new minor trichocytic cytokeratin polypeptides, designated Hax (type I) and Hbx (type II). Antibodies against trichocytic cytokeratins that do not crossreact with any of the epithelial cytokeratins have enabled us to study the expression of both kinds of cytokeratin in the various cell types of human and bovine hair follicles. Using immunofluorescence microscopy, we have observed intense reactions of trichocytic cytokeratins only in cells contributing to the forming hairs, i.e., hair shaft, medulla and cuticle, whereas immunostaining of the peribulbar matrix cells was weaker, if at all detectable. In contrast, epithelial cytokeratins were localized in both the inner and outer root sheath epithelia but, surprisingly, also in certain portions of the trichocyte column, notably cells of the cuticle, certain medullary cells, and trichocytes of the basalmost peripapillary cell layers. Cells coexpressing trichocytic and epithelial cytokeratins have been identified by double-label immunofluorescence microscopy. Epithelial cytokeratins of the inner and outer root sheath epithelia include, most remarkably, "simple-epithelium-type" cytokeratins 8, 18, and 19; these occur in certain peribulbar regions, in distinct patterns, but with variable frequencies. The occurrence of simple epithelial cytokeratins in hair follicles has also been confirmed by high-sensitivity immunoblotting of follicular polypeptides separated by gel electrophoresis. Vimentin-positive cells were abundantly interspersed (in some follicles, but not in all) between the trichocytes of the peripapillary cone, most of them probably being melanocytes. The cell-type complexity of the hair follicle and the different patterns of cytoskeletal protein expression in the various hair follicle cells are discussed in relation to the development and growth of this organ.     

The assembly of keratins from higher plant cells

Summary In vitro assembly and morphological characteristics of purified 58 kDa, 52 kDa, 50 kDa, and 45 kDa polypeptides in the leaves and the cotyledons of the cabbage (Brassica pekinensis Rupt.) were investigated by electron microscopy and scanning tunneling microscopy. The three or four purified intermediate filament (IF) polypeptides can spontaneously assemble into intermediate filaments in vitro with a 23–24 nm axial repeat, which indicates that keratin IFs in higher plant cells have the same molecular arrangement as in animal cells. STM images suggest that the plant keratin filaments display a pronounced structural polymorphism, which can be composed of 3 nm, 4.5 nm, or 6 nm wide keratin protofilaments.Abbreviation IF intermediate filament - STM scanning tunneling microscopy - SDS sodium dodecyl sulfate - BCIP 5-bromo-4-chloro-3-indolyl phosphate-toluidine - NBC p-nitroblue tetrazolium chloride - PMSF phenylmethyl sulfonylfluoride - HOPG high oriented pyrolytic graphite     

Structural analysis of vimentin and keratin intermediate filaments by cryo-electron tomography

Intermediate filaments are a large and structurally diverse group of cellular filaments that are classified into five different groups. They are referred to as intermediate filaments (IFs) because they are intermediate in diameter between the two other cytoskeletal filament systems that is filamentous actin and microtubules. The basic building block of IFs is a predominantly alpha-helical rod with variable length globular N- and C-terminal domains. On the ultra-structural level there are two major differences between IFs and microtubules or actin filaments: IFs are non-polar, and they do not exhibit large globular domains. IF molecules associate via a coiled-coil interaction into dimers and higher oligomers. Structural investigations into the molecular building plan of IFs have been performed with a variety of biophysical and imaging methods such as negative staining and metal-shadowing electron microscopy (EM), mass determination by scanning transmission EM, X-ray crystallography on fragments of the IF stalk and low-angle X-ray scattering. The actual packing of IF dimers into a long filament varies between the different families. Typically the dimers form so called protofibrils that further assemble into a filament. Here we introduce new cryo-imaging methods for structural investigations of IFs in vitro and in vivo, i.e., cryo-electron microscopy and cryo-electron tomography, as well as associated techniques such as the preparation and handling of vitrified sections of cellular specimens.     

Polymorphism of reconstituted human epidermal keratin filaments: determination of their mass-per-length and width by scanning transmission electron microscopy (STEM)

We have determined the mass-per-length (MPL) and the width of unstained freeze-dried reconstituted human epidermal keratin filaments by scanning transmission electron microscopy (STEM). Filaments were reassembled from keratins extracted from four different sources: cultured human epidermal cells (CHEC), human callus (CAL), and the living layers (LL) and stratum corneum (SC) of normal human epidermis. MPL histograms of all four keratin filament types could be fitted by a superposition of two or three Gaussians, with their respective major peaks located between 17 and 20 kDa/nm. We interpreted the multiple MPL peaks to represent different polymorphic forms of the reconstituted filaments. The number of subunits per filament cross section calculated from MPL peak positions, average subunit molecular weight, and an axial repeat of the subunits within the filament of 46.5 nm revealed an average difference between polymorphic variants of 7.5 +/- 0.9 subunits. These data suggest that reconstituted human epidermal keratin filaments are made of two to four 8-stranded "protofibrils" (i.e., made of two laterally aggregated 4-stranded protofilaments), in agreement with earlier observations. The average widths of unstained freeze-dried keratin filaments were larger than those of negatively stained filaments: 12.6 nm (9.6 nm) for CHEC, 12.3 nm (9.7 nm) for CAL, 11.6 nm (8.3 nm) for LL, and 11.3 nm (7.9 nm) for SC keratin filaments, with the values in brackets corresponding to negatively stained samples. Assuming the MPL to be proportional to the square of the filament width, there is a good correlation between the MPL and width measurements both for filaments within a given type as well as among those reconstituted from different types of keratin extracts.     

Assessing the flexibility of intermediate filaments by atomic force microscopy

Eukaryotic cells contain three cytoskeletal filament systems that exhibit very distinct assembly properties, supramolecular architectures, dynamic behaviour and mechanical properties. Microtubules and microfilaments are relatively stiff polar structures whose assembly is modulated by the state of hydrolysis of the bound nucleotide. In contrast, intermediate filaments (IFs) are more flexible apolar structures assembled from a approximately 45 nm long coiled-coil dimer as the elementary building block. The differences in flexibility that exist among the three filament systems have been described qualitatively by comparing electron micrographs of negatively stained dehydrated filaments and by directly measuring the persistence length of F-actin filaments (approximately 3-10 microm) and microtubules (approximately 1-8 mm) by various physical methods. However, quantitative data on the persistence length of IFs are still missing. Toward this goal, we have carried out atomic force microscopy (AFM) in physiological buffer to characterise the morphology of individual vimentin IFs adsorbed to different solid supports. In addition, we compared these images with those obtained by transmission electron microscopy (TEM) of negatively stained dehydrated filaments. For each support, we could accurately measure the apparent persistence length of the filaments, yielding values ranging between 0.3 microm and 1 microm. Making simple assumptions concerning the adsorption mechanism, we could estimate the persistence length of an IF in a dilute solution to be approximately 1 microm, indicating that the lower measured values reflect constraints induced by the adsorption process of the filaments on the corresponding support. Based on our knowledge of the structural organisation and mechanical properties of IFs, we reason that the lower persistence length of IFs compared to that of F-actin filaments is caused by the presence of flexible linker regions within the coiled-coil dimer and by postulating the occurrence of axial slipping between dimers within IFs.     

The intermediate filament architecture as determined by X-ray diffraction modeling of hard alpha-keratin

Despite investigation since the 1950s, the molecular architecture of intermediate filaments has not yet been fully elucidated. Reliable information about the longitudinal organization of the molecules within the filaments and about the lateral interfilament packing is now available, which is not the case for the transverse architecture. Interesting results were recently obtained from in vitro microscopy observations and cross-linking of keratin, desmin, and vimentin analyses. The structural features that emerge from these analyses could not be fully representative of the in vivo architecture because intermediate filaments are subject to polymorphism. To bring new light to the transverse intermediate filament architecture, we have analyzed the x-ray scattering equatorial profile of human hair. Its comparison with simulated profiles from atomic models of a real sequence has allowed results to be obtained that are representative of hard alpha-keratin intermediate filaments under in vivo conditions. In short, the alpha-helical coiled coils, which are characteristic of the central rod of intermediate filament dimers, are straight and not supercoiled into oligomers; the radial density across the intermediate filament section is fairly uniform; the coiled coils are probably assembled into tetrameric oligomers, and finally the oligomer positions and orientations are not regularly ordered. These features are discussed in terms of filament self-assembling and structural variability.     

Polymerization and structure of nucleotide-free actin filaments

Two factors have limited studies of the properties of nucleotide-free actin (NFA). First, actin lacking bound nucleotide denatures rapidly without stabilizing agents such as sucrose; and second, without denaturants such as urea, it is difficult to remove all of the bound nucleotide. We used apyrase, EDTA and Dowex-1 to prepare actin that is stable in sucrose and approximately 99 % free of bound nucleotide. In high concentrations of sucrose where NFA is stable, it polymerizes more favorably with a lag phase shorter than ATP-actin and a critical concentration close to zero. NFA filaments are stable, but depolymerize at low sucrose concentrations due to denaturation of subunits when they dissociate from filament ends. By electron microscopy of negatively stained specimens, NFA forms long filaments with a persistence length 1.5 times greater than ADP-actin filaments. Three-dimensional helical reconstructions of NFA and ADP-actin filaments at 2.5 nm resolution reveal similar intersubunit contacts along the two long-pitch helical strands but statistically significant less mass density between the two strands of NFA filaments. When compared with ADP-actin filaments, the major difference peak of NFA filaments is near, but does not coincide with, the vacated nucleotide binding site. The empty nucleotide binding site in these NFA filaments is not accessible to free nucleotide in the solution. The affinity of NFA filaments for rhodamine phalloidin is lower than that of native actin filaments, due to a lower association rate. This work confirms that bound nucleotide is not essential for actin polymerization, so the main functions of the nucleotide are to stabilize monomers, modulate the mechanical and dynamic properties of filaments through ATP hydrolysis and phosphate release, and to provide an internal timer for the age of the filament.     

Biomechanical properties of intermediate filaments: from tissues to single filaments and back

The animal cell cytoskeleton consists of three interconnected filament systems: actin-containing microfilaments (MFs), microtubules (MTs), and the lesser known intermediate filaments (IFs). All IF proteins share a common tripartite domain structure and the ability to assemble into 8-12 nm wide filaments. Electron microscopy data suggest that IFs are built according to a completely different plan from that of MFs and MTs. IFs are known to impart mechanical stability to cells and tissues but, until recently, the biomechanical properties of single IFs were unknown. However, with the discovery of naturally occurring micrometer-wide IF bundles and the development of new methodologies to mechanically probe single filaments, it is now possible to propose a more unified view of IF biomechanics. Unlike MFs and MTs, single IFs can now be described as flexible, extensible and tough, which has important implications for our understanding of cell and tissue mechanics. Furthermore, the molecular mechanisms at play when IFs are deformed point toward a pivotal role for them in mechanotransduction.     

Three-dimensional reconstruction of a simple Z-band in fish muscle

The three-dimensional structure of the Z-band in fish white muscle has been investigated by electron microscopy. This Z-band is described as simple, since in longitudinal sections it has the appearance of a single zigzag pattern connecting the ends of actin filaments of opposite polarity from adjacent sarcomeres. The reconstruction shows two pairs of links, the Z-links, between one actin filament and the facing four actin filaments in the adjacent sarcomere. The members of each pair have nearly diametrically opposed origins. In relation to one actin filament, one pair of links appears to bind along the final 10 nm of the actin filament (proximal site) and the other pair binds along a region extending from 5 to 20 nm from the filament end (distal site). Between one pair and the other, there is a rotation of approximately 80 degrees round the filament axis. A Z-link with a proximal site at the end of one actin filament attaches at a distal site on the oppositely oriented actin filaments of the facing sarcomere and vice versa. The length of each Z-link is consistent with the length of an alpha-actinin molecule. An additional set of links located 10-15 nm from the center of the Z-band occurs between actin filaments of the same polarity. These polar links connect the actin filaments along the same direction on each side of the Z-band. The three-dimensional structure appears to have twofold screw symmetry about the central plane of the Z-band. Only approximate twofold rotational symmetry is observed in directions parallel to the actin filaments. Previous models of the Z-band in which four identical and rotationally symmetrical links emanate from the end of one actin filament and span across to the ends of four actin filaments in the adjacent sarcomere are therefore incorrect.