Genetic mapping in Streptomyces clavuligerus by protoplast fusion

The development of a protoplast manipulation protocol for the industrially important bacterium Streptomyces clavuligerus, which produces the beta-lactamase inhibitor clavulanic acid, made possible a preliminary genetic mapping study based on protoplast fusion crosses. A preliminary position for 11 markers on the S. clavuligerus genetic map is proposed. Fusion progeny were characterized by random spore analysis because the markers present in the strains were not amenable to the conventional four-on-four selection procedure. Whilst the resulting map is similar to that derived by conjugation for S. clavuligerus and S. coelicolor, further analysis of the markers is required to confirm these observations.     

Genetic analysis in Streptomyces chrysomallus

A circular linkage map was developed for Streptomyces chrysomallus, a producer of actinomycin C. The map order of various marker loci was deduced from matings and to a minor extent from protoplast fusions. The map strongly resembles that of Streptomyces coelicolor A3(2). The recombination frequencies were low and highly variable (from 10(-9) to 5 X 10(-6]. Plasmid pIJ303 expressed its thiostrepton resistance gene in S. chrysomallus but did not promote chromosomal transfer or induce the Ltz+ phenotype. The data provide a background of genetics for investigations of antibiotic synthesis in this strain.     

Bacterial protoplast fusion: recombination in fused protoplasts of Streptomyces coelicolor

Summary Numerous recombinants arose when protoplasts of S. coelicolor were treated with polyethylene glycol and regenerated on non-selective solid medium. In six-factor crosses, recombination frequencies of more than 10% (up to 17%) were routinely observed. This recombination did not require either of the known sex factors, SCP1 and SCP2.The proportion of multiple crossover classes was much higher than amongst recombinants produced by conjugation between mycelia. Analysis of the spatial distribution of crossovers in double and quadruple crossover recombinants showed only a slight tendency for crossovers to occur closer together than randomly on the complete linkage group. This suggests that genomes brought together by protoplast fusion are complete, or nearly so (in conjugation, in contrast, one genome is represented by a comparatively short fragment). Individual colonies arising from fused protoplasts did not contain different parental genomes without recombinants, but recombinants often occurred without parentals. Several recombinant genotypes often occurred in the same colony, showing a segregation of some, only, of the parental alleles. Complementary genotypes, parental or recombinant, did not occur in the same colony. It is postulated that complete genomes of fused protoplasts usually become fragmented and that crossing-over, often repeated, occurs between the fragments, to generate haploid recombinants.Analysis of fusions between protoplasts of four different genotypes indicated that the average number of protoplasts fusing together was low, but nevertheless appreciable numbers of fusions involved three or four genomes. Crossing-over between them produced recombinants inheriting markers from three or four parents.The generation of nearly random populations of recombinants between two or more parent strains by protoplast fusion under the conditions described appears to have simple applications in industrial and academic strain construction.     

Characteristics of defective lysogeny in Streptomyces chrysomallus

When Streptomyces chrysomallus 2703 grows on solid media, lytic zones appear in the form of negative colonies which are not caused by the virulent phage. The material from these colonies and the cultural broth of S. chrysomallus 2703 were examined by electron microscopy. Four different morphological types of particles were revealed, three of which were defective phage particles (tails). Particles of the fourth type had a regular hexagonal shape and a diameter of 200A. The particles prevailed in all of the preparations. Their origin is discussed. S. chrysomallus in considered as a poly- and defective lysogenic culture.     

Genetics of actinomycin C production in Streptomyces chrysomallus

Three distinct classes of mutations affecting the biosynthesis of actinomycin have been established in Streptomyces chyrsomallus by crossing various actinomycin-nonproducing mutants with each other by protoplast fusion. In crosses between members of different classes of mutations, actinomycin-producing recombinant progeny arose, whereas in crosses between members of the same class, no actinomycin-producing recombinants were seen. Biochemical examination of a number of mutants revealed that the expression of all actinomycin synthetases was reduced by about 1 order of magnitude in mutants belonging to class II. In mutants of class I, the specific activities of the actinomycin synthetases were comparable with those measured in their actinomycin-producing parents. Feeding experiments with 4-methyl-3-hydroxyanthranilic acid (4-MHA), the biosynthetic precursor of the chromophore moiety of actinomycin, with representative mutants of the three genetic classes revealed formation of actinomycin in minute amounts by mutants of class I. It is suggested that mutants belonging to class I are mutated at a genetic locus involved in the biosynthesis of 4-MHA. Mutants belonging to class II appear to carry mutations at a locus involved in the regulation of the expression of the actinomycin synthetases. The role of the locus in class III mutations could not be assigned. Mapping studies in S. chrysomallus based on conjugal matings revealed the chromosomal linkage of all three loci. Mutations belonging to classes I and III were closely linked. Their genetic loci could be localized in a map interval of the chromosomal linkage group which is significantly distant from the gene locus represented by mutations belonging to class II.     

Morphology of Streptomyces chrysomallus microcolonies in submerged cultivating

Gel matrix covering microcolonies and individual hyfs and cords of mycelial hyfs was for the first type detected using a special method for making preparations for microscopic examinations. The matrix is observed during culturing streptomycetes in media of different composition for mycelium of different age. Gel matrix renders the colonies a compact shape and can be regarded as a specific structural component of Streptomyces microcolonies. The matrix contains gels differing by hydrophobicity and low-molecular-weight biosynthesis products, including actinomycin antibiotics, which play an important role in maintenance of morphological structure.     

Genetic interactions in Streptomyces rimosus mediated by conjugation and by protoplast fusion

The development of a protoplast fusion technique for oxytetracycline-producing Streptomyces rimosus strains, and its evaluation for the application for a breeding programme, has been described. Treatment of S. rimosus protoplasts with 40% (w/v) PEG 1550 for 30 min gave optimal numbers of recombinants ranging from 1 to 10% of the total progeny. Therefore, by comparison with conjugation, protoplast fusion increased the frequency of recombination by two to three orders of magnitude. The proportion of multiple crossover classes amongst recombinants was higher, by a factor of ten, after protoplast fusion (13.3%) than after conjugation (1.5%). Participation of less frequent complementary genotype doubled from 9.0% in conjugation to 17.9% in protoplast fusion. Overall, this suggested that the opportunities for crossing over in a fusion of S. rimosus protoplasts were spatially and/or temporally extended leading to a loosening of linkage with a near-random assortment of genotypes in a cross. However, by minimizing the multiple crossover classes and calculating allele frequency gradients, it was shown that the protoplast fusion technique allows arrangement of genetic markers on the S. rimosus chromosome. These are ideal characteristics for the recombination of divergent lines in a strain improvement programme.     

Characterization of Streptomyces D3 derived from protoplast fusion between Streptomyces cyaneus 190-1 and Streptomyces griseoruber 42-9

Streptomyces D3, derived from protoplast fusion between Streptomyces cyaneus 190-1 and Streptomyces griseoruber 42-9, has the ability to produce high levels of xylose isomerase when grown on hemicellulosic materials such as xylan as the carbon source. Comparison between the partial nucleotide sequences of the 16S ribosomal RNA genes from S. cyaneus 190-1, S. griseoruber 42-9, and fusant D3 showed that the 16S rRNA gene of fusant D3 was identical to that of S. cyaneus 190-1. Partial sequence analysis of the xylose isomerase genes also indicated that the gene of fusant D3 was identical to that of S. cyaneus 190-1. The partial DNA fragments for the xylanase genes (xlnA and xlnB) of fusant D3 were amplified by PCR, and subjected to Southern hybridization analysis. The results revealed that the xlnB gene of fusant D3 was similar to that of S. cyaneus 190-1, but that the xlnA gene of fusant D3 was similar to that of S. griseoruber 42-9. These results suggest that the majority of the genome of fusant D3 may be derived from S. cyaneus 190-1.     

Carrot protoplast fusion

Conclusion Carrot protoplasts have been used successfully in many protoplast fusion studies. These studies have demonstrated 1) whether or not the expression of certain resistances is dominant or recessive, 2) the development of a “universla hybridzer,” 3) the use of chemicals to inactivate one parent, 50 the complementation of albino mutants, 5) interspecific, intergeneric, and interkingdom fusions, and 6) the dominant expression of plant regeneration ability, and 7) the occurrence of somatic segregation in fusion hybrids.     

Genetic analysis of intraspecies recombinant formation by protoplast fusion with three species of Streptomyces

Abstract Protoplast fusion was shown to produce high frequencies of recombinant progeny in intraspecies crosses with auxotrophic mutants of Streptomyces canescens, Streptomyces griseus and Streptomyces limosus . The fused protoplasts were regenerated on non-selective media and the progeny spores subsequently analysed on selective media to allow detection of all possible genotypes. Prototrophic recombinants arose with frequencies of between 1% and 8%. All 4 possible genotypes were recovered in a series of 2-factor crosses and 6 of the 8 possible genotypes were detected in a 3-factor cross. In spite of attempts to equalise the ratios of parental protoplasts in the fusion mixture, there were noticeable deviations from unity in the ratios of parental genotypes in the progeny.     

Antagonistic properties of two recombinant strains of Streptomyces melanosporofaciens obtained by intraspecific protoplast fusion

Intraspecific protoplast fusion was used to produce stable prototrophic recombinants of Streptomyces melanosporofaciens EF-76, a biocontrol agent of plant disease producing geldanamycin. Two recombinant strains (FP-54 and FP-60) that differed with regard to their antagonistic properties against Bacillus cereus ATCC 14579, Streptomyces scabies EF-35 and Phytophthora fragariae var. rubi 390 were characterized. FP-60 lost the ability to inhibit the in vitro growth of these microbial strains while FP-54 exhibited higher antagonistic activities against them. FP-60 was deficient in geldanamycin biosynthesis whereas FP-54 was shown to produce, in addition to geldanamycin, at least two other antimicrobial compounds that were absent in the culture supernatants of strain EF-76. Like the wild-type strain EF-76, strain FP-54 reduced common scab symptoms on potato tuber but no significant difference was observed between the disease index attributed to tubers treated with strain EF-76 or with strain FP-54. Strain FP-60 showed no protective effect against common scab. The disease index of tubers treated with this recombinant was worse than the index associated with potato tubers from control treatments.     

Effect of cloned DNA fragment from Streptomyces chrysomallus No.2 on metabolism in Streptomyces strains

The effects on cloned DNA fragment carrying an actinomycin resistance determinant on physiological processes in streptomyces strains with various potencies in producing this antibiotic, their inactive mutants, and model strain of Streptomyces lividans 66 were studied. This fragment was shown to modulate bacterial resistance to actinomycin and biosynthesis of antibiotics.     

Electrochemical protoplast fusion in citrus

We report here the development of a novel protoplast fusion method for citrus somatic hybridization. This new procedure, which we have named electrochemical protoplast fusion, is based on chemically induced protoplast aggregation, using a low concentration of polyethylene glycol, and DC pulse-promoted membrane fusion. Based on the results of nucleus and mitochondria molecular analyses, we were successful in using this method to regenerate both symmetric somatic hybrids and cybrids. Various parameters, including pulse intensity, pulse length, and composition of the fusion media, were tested, and the optimum fusion condition selected consisted of two 100-s pulses of 1,500 V cm^–1. Our conclusion is that electrochemical fusion is a reliable and reproducible method that combines the best features of both the chemical and electrical methods, thereby promoting cell division and high embryogenesis rates of the fused cells. It represents a new approach to citrus somatic hybridization. Various interesting features of this new approach are presented and discussed.     

Composition of cell walls of 2 mutant strains of Streptomyces chrysomallus

The cell walls and peptidoglycans of two mutant strains, Streptomyces chrysomallus var. carotenoides and Streptomyces chrysomallus var. macrotetrolidi, were studied. The strains are organisms producing carotenes and antibiotics of the macrotetrolide group. By the qualitative composition of the peptidoglycans the mutants belong to Streptomyces and are similar. Their glycan portion consists of equimolar quantities of N-acetyl glucosamine and muramic acid. The peptide subunit is presented by glutamic acid, L, L-diaminopimelic acid, glycine and alanine. The molar ratio of alanine is 1.2-1.3. The mutant strains differ in the content of carbohydrates, total phosphorus and phosphorus belonging to teichoic acids. Teichoic acids of the cell walls of the both strains are of the ribitolhosphate nature. The cell walls of the mutants contain polysaccharides differing from teichoic acids and consisting of glucose, galactose, arabinose and fucose. The influence of the cell wall composition of the mutant strains on their morphology and metabolism and comparison of the data relative to the mutant strains with those relative to the starting strain are discussed.     

Laser-induced tobacco protoplast fusion

Laser tweezers can manipulate small particles, such as cells and organdies. When coupling them with laser microbeam selective fusion of two tobacco protoplasts containing some chloroplast was achieved. Physical and biological variables that affect laser trapping and laser-induced fusion were also discussed. The results show that the effect of chloroplast content and distribution on the yield of cell fusion is remarkable.     

Electron microscopic analysis of protoplast fusion in Streptomyces hygroscopicus and consideration on structural alterations in fusing membranes

Protoplasts of Streptomyces hygroscopicus were treated with polyethylene glycol and prepared for electron microscopic investigation as ultrathin sections. About 5% binary fusion products and 0.9% multicellular fusion products have been obtained in the sections. Three main types may be differentiated among binary fusion products, characterized by a successive loss of the bispherical shape and of continuous membrane structures in fusion zones.Analysing the membrane alterations a contact zone characterized by intact cytoplasmic membranes in both protoplasts, a fusion zone with a trilaminar fusion membrane of about 13–17 nm in thickness, and a fusion zone without continuous membrane structure can be distinguished. The different fusion areas are considered as stages in the fusion process. The data will be discussed in conjunction with a model for membrane alterations during fusion at the molecular level.