Synthesis of Programmable Main-chain Liquid-crystalline Elastomers Using a Two-stage Thiol-acrylate Reaction

This study presents a novel two-stage thiol-acrylate Michael addition-photopolymerization (TAMAP) reaction to prepare main-chain liquid-crystalline elastomers (LCEs) with facile control over network structure and programming of an aligned monodomain. Tailored LCE networks were synthesized using routine mixing of commercially available starting materials and pouring monomer solutions into molds to cure. An initial polydomain LCE network is formed via a self-limiting thiol-acrylate Michael-addition reaction. Strain-to-failure and glass transition behavior were investigated as a function of crosslinking monomer, pentaerythritol tetrakis(3-mercaptopropionate) (PETMP). An example non-stoichiometric system of 15 mol% PETMP thiol groups and an excess of 15 mol% acrylate groups was used to demonstrate the robust nature of the material. The LCE formed an aligned and transparent monodomain when stretched, with a maximum failure strain over 600%. Stretched LCE samples were able to demonstrate both stress-driven thermal actuation when held under a constant bias stress or the shape-memory effect when stretched and unloaded. A permanently programmed monodomain was achieved via a second-stage photopolymerization reaction of the excess acrylate groups when the sample was in the stretched state. LCE samples were photo-cured and programmed at 100%, 200%, 300%, and 400% strain, with all samples demonstrating over 90% shape fixity when unloaded. The magnitude of total stress-free actuation increased from 35% to 115% with increased programming strain. Overall, the two-stage TAMAP methodology is presented as a powerful tool to prepare main-chain LCE systems and explore structure-property-performance relationships in these fascinating stimuli-sensitive materials.     

Bringing to Light Hidden Elasticity in the Liquid State Using In-Situ Pretransitional Liquid Crystal Swarms

The present work reveals that at the sub-millimeter length-scale, molecules in the liquid state are not dynamically free but elastically correlated. It is possible to “visualize” these hidden elastic correlations by using the birefringent properties of pretransitional swarms persistent in liquids presenting a weak first order transition. The strategy consists in observing the optical response of the isotropic phase of mesogenic fluids to a weak (low energy) mechanical excitation. We show that a synchronized optical response is observable at frequencies as low as 0.01Hz and at temperatures far away from any phase transition (up to at least 15°C above the transition). The observation of a synchronized optical signal at very low frequencies points out a collective response and supports the existence of long-range elastic (solid-like) correlations existing at the sub-millimeter length-scale in agreement to weak solid-like responses already identified in various liquids including liquid water. This concept of elastically linked molecules differs deeply with the academic view of molecules moving freely in the liquid state and has profound consequences on the mechanisms governing collective effects as glass formation, gelation and transport, or synchronized processes in physiological media.     

Optical Transmission Enhancement and Tuning by Overylaying Liquid Crystals on a Gold Film with Patterned Nanoholes

A gold film with subwavelength nanoholes on a glass substrate was fabricated through electron beam lithography and its extraordinary optical transmission (EOT) was characterized. By applying a liquid crystal overlayer to the gold film, its EOT can be further enhanced by ~11% due to the refractive index matching of the dielectric media on its two sides. By controlling the alignment of the liquid crystal molecules, a highly reversible and reproducible tuning of the transmission peak in both intensity and position is demonstrated.     

Biological liquid crystal elastomers

Liquid crystal elastomers (LCEs) have recently been described as a new class of matter. Here we review the evidence for the novel conclusion that the fibrillar collagens and the dragline silks of orb web spiders belong to this remarkable class of materials. Unlike conventional rubbers, LCEs are ordered, rather than disordered, at rest. The identification of these biopolymers as LCEs may have a predictive value. It may explain how collagens and spider dragline silks are assembled. It may provide a detailed explanation for their mechanical properties, accounting for the variation between different members of the collagen family and between the draglines in different spider species. It may provide a basis for the design of biomimetic collagen and dragline silk analogues by genetic engineering, peptide- or classical polymer synthesis. Biological LCEs may exhibit a range of exotic properties already identified in other members of this remarkable class of materials. In this paper, the possibility that other transversely banded fibrillar proteins are also LCEs is discussed.     

Initial Steps in the Pathway for Bacterial Degradation of Two Tetrameric Lignin Model Compounds

We investigated the metabolic route by which a lignin tetramer-degrading mixed bacterial culture degraded two tetrameric lignin model compounds containing β—O—4 and 5—5 biphenyl structures. The α-hydroxyl groups in the propane chain of both phenolic and nonphenolic tetramers were first oxidized symmetrically in two successive steps to give monoketones and diketones. These ketone metabolites were decomposed through C_α(=O)—C_β cleavage, forming trimeric carboxyl acids which were further metabolized through another C_α(=O)—C_β cleavage. Dehydrodiveratric acid, which resulted from the cleavage of the carbon bonds of the nonphenol tetramer, was demethylated twice. Four metabolites of the phenolic tetramer were purified and identified. All of these were stable compounds in sterile mineral medium, but were readily degraded by lignin tetramer-degrading bacteria along the same pathway as the phenol tetramer. No monoaromatic metabolites accumulated. All metabolites were identified by mass and proton magnetic resonance spectrometry. The metabolic route by which the mixed bacterial culture degraded tetrameric lignin model compounds was different from the route of the main ligninase-catalyzed C_α—C_β cleavage by Phanerochaete chrysosporium.     

A Novel Hepatitis C Virus Genotyping Method Based on Liquid Microarray

The strategy used to treat HCV infection depends on the genotype involved. An accurate and reliable genotyping method is therefore of paramount importance. We describe here, for the first time, the use of a liquid microarray for HCV genotyping. This liquid microarray is based on the 5′UTR — the most highly conserved region of HCV — and the variable region NS5B sequence. The simultaneous genotyping of two regions can be used to confirm findings and should detect inter-genotypic recombination. Plasma samples from 78 patients infected with viruses with genotypes and subtypes determined in the Versant™ HCV Genotype Assay LiPA (version I; Siemens Medical Solutions, Diagnostics Division, Fernwald, Germany) were tested with our new liquid microarray method. This method successfully determined the genotypes of 74 of the 78 samples previously genotyped in the Versant™ HCV Genotype Assay LiPA (74/78, 95%). The concordance between the two methods was 100% for genotype determination (74/74). At the subtype level, all 3a and 2b samples gave identical results with both methods (17/17 and 7/7, respectively). Two 2c samples were correctly identified by microarray, but could only be determined to the genotype level with the Versant™ HCV assay. Genotype “1” subtypes (1a and 1b) were correctly identified by the Versant™ HCV assay and the microarray in 68% and 40% of cases, respectively. No genotype discordance was found for any sample. HCV was successfully genotyped with both methods, and this is of prime importance for treatment planning. Liquid microarray assays may therefore be added to the list of methods suitable for HCV genotyping. It provides comparable results and may readily be adapted for the detection of other viruses frequently co-infecting HCV patients. Liquid array technology is thus a reliable and promising platform for HCV genotyping.     

Beat gestures influence which speech sounds you hear

Beat gestures—spontaneously produced biphasic movements of the hand—are among the most frequently encountered co-speech gestures in human communication. They are closely temporally aligned to the prosodic characteristics of the speech signal, typically occurring on lexically stressed syllables. Despite their prevalence across speakers of the world''s languages, how beat gestures impact spoken word recognition is unclear. Can these simple ‘flicks of the hand'' influence speech perception? Across a range of experiments, we demonstrate that beat gestures influence the explicit and implicit perception of lexical stress (e.g. distinguishing OBject from obJECT), and in turn can influence what vowels listeners hear. Thus, we provide converging evidence for a manual McGurk effect: relatively simple and widely occurring hand movements influence which speech sounds we hear.     

Lamellar Bone: Structure–Function Relations

The term “bone” refers to a family of materials that have complex hierarchically organized structures. These structures are primarily adapted to the variety of mechanical functions that bone fulfills. Here we review the structure–mechanical relations of one bone structural type, lamellar bone. This is the most abundant type in many mammals, including humans. A lamellar unit is composed of five sublayers. Each sublayer is an array of aligned mineralized collagen fibrils. The orientations of these arrays differ in each sublayer with respect to both collagen fibril axes and crystal layers, such that a complex rotated plywood-like structure is formed. Specific functions for lamellar bone, as opposed to the other bone types, could not be identified. It is therefore proposed that the lamellar structure is multifunctional—the “concrete” of the bone family of materials. Experimentally measured mechanical properties of lamellar bone demonstrate a clear-cut anisotropy with respect to the axis direction of long bones. A comparison of the elastic and ultimate properties of parallel arrays of lamellar units formed in primary bone with cylindrically shaped osteonal structures in secondary formed bone shows that most of the intrinsic mechanical properties are built into the lamellar structure. The major advantages of osteonal bone are its fracture properties. Mathematical modeling of the elastic properties based on the lamellar structure and using a rule-of-mixtures approach can closely simulate the measured mechanical properties, providing greater insight into the structure–mechanical relations of lamellar bone.     

New Strategy for Isolating Novel Nematicidal Crystal Protein Genes from Bacillus thuringiensis Strain YBT-1518

We have developed a strategy for isolating cry genes from Bacillus thuringiensis. The key steps are the construction of a DNA library in an acrystalliferous B. thuringiensis host strain and screening for the formation of crystal through optical microscopy observation and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analyses. By this method, three cry genes—cry55Aa1, cry6Aa2, and cry5Ba2—were cloned from rice-shaped crystals, producing B. thuringiensis YBT-1518, which consists of 54- and 45-kDa crystal proteins. cry55Aa1 encoded a 45-kDa protein, cry6Aa2 encoded a 54-kDa protein, and cry5Ba2 remained cryptic in strain YBT-1518, as shown by SDS-PAGE or microscopic observation. Proteins encoded by these three genes are all toxic to the root knot nematode Meloidogyne hapla. The two genes cry55Aa1 and cry6Aa2 were found to be located on a plasmid with a rather small size of 17.7 kb, designated pBMB0228.     

Lithium Difluorophosphate‐Based Dual‐Salt Low Concentration Electrolytes for Lithium Metal Batteries

The safety hazards and low Coulombic efficiency originating from the growth of lithium dendrites and decomposition of the electrolyte restrict the practical application of Li metal batteries (LMBs). Inspired by the low cost of low concentration electrolytes (LCEs) in industrial applications, dual‐salt LCEs employing 0.1 m Li difluorophosphate (LiDFP) and 0.4 m LiBOB/LiFSI/LiTFSI are proposed to construct a robust and conductive interphase on a Li metal anode. Compared with the conventional electrolyte using 1 m LiPF₆, the ionic conductivity of LCEs is reduced but the conductivity decrement of the separator immersed in LCEs is moderate, especially for the LiDFP–LiFSI and LiDFP–LiTFSI electrolytes. The accurate Coulombic efficiency (CE) of the Li||Cu cells increases from 83.3% (electrolyte using 1 m LiPF₆) to 97.6%, 94.5%, and 93.6% for LiDFP–LiBOB, LiDFP–LiFSI, and LiDFP–LiTFSI electrolytes, respectively. The capacity retention of Li||LiFePO₄ cells using the LiDFP–LiBOB electrolyte reaches 95.4% along with a CE over 99.8% after 300 cycles at a current density of 2.0 mA cm^?2 and the capacity reaches 103.7 mAh g^?1 at a current density of up to 16.0 mA cm^?2. This work provides a dual‐salt LCE for practical LMBs and presents a new perspective for the design of electrolytes for LMBs.     

Invasive cell migration is initiated by guided growth of long cellular extensions

The migration of border cells during Drosophila melanogaster oogenesis is a simple and powerful system for studying invasive cell migration in vivo. Border cells are somatic cells that delaminate from the follicular epithelium of an egg chamber and invade the germ line cluster. They migrate between the nurse cells to reach the oocyte, using DE-cadherin for adhesion to the substratum. Border cells take approximately 6 h to migrate a distance of 100 microm. The migration is guided by EGFR (epidermal growth factor receptor) and PVR (platelet-derived growth factor (PDGF)/vascular endothelial growth factor (VEGF) receptor). Here, we show that a single long cellular extension (LCE), several cell diameters in length, is formed at the initiation of migration. The LCE may function as a 'pathfinder' in response to guidance cues. LCE growth requires directional guidance signals and specific adhesion to the substratum. Interference with actin-myosin interactions allows continued LCE growth while preventing translocation of the cell bodies. We discuss similarities between LCEs and axons and the use of LCE-like structures as a general mechanism for initiating invasive migration in vivo.     

Crystal structure of bacterial cytotoxic necrotizing factor CNFY reveals molecular building blocks for intoxication

Cytotoxic necrotizing factors (CNFs) are bacterial single‐chain exotoxins that modulate cytokinetic/oncogenic and inflammatory processes through activation of host cell Rho GTPases. To achieve this, they are secreted, bind surface receptors to induce endocytosis and translocate a catalytic unit into the cytosol to intoxicate host cells. A three‐dimensional structure that provides insight into the underlying mechanisms is still lacking. Here, we determined the crystal structure of full‐length Yersinia pseudotuberculosis CNF_Y. CNF_Y consists of five domains (D1–D5), and by integrating structural and functional data, we demonstrate that D1–3 act as export and translocation module for the catalytic unit (D4–5) and for a fused β‐lactamase reporter protein. We further found that D4, which possesses structural similarity to ADP‐ribosyl transferases, but had no equivalent catalytic activity, changed its position to interact extensively with D5 in the crystal structure of the free D4–5 fragment. This liberates D5 from a semi‐blocked conformation in full‐length CNF_Y, leading to higher deamidation activity. Finally, we identify CNF translocation modules in several uncharacterized fusion proteins, which suggests their usability as a broad‐specificity protein delivery tool.     

Kinetochore-driven outgrowth of microtubules is a central contributor to kinetochore fiber maturation in crane-fly spermatocytes

We use liquid crystal polarized light imaging to record the life histories of single kinetochore (K-) fibers in living crane-fly spermatocytes, from their origins as nascent K-fibers in early prometaphase to their fully matured form at metaphase, just before anaphase onset. Increased image brightness due to increased retardance reveals where microtubules are added during K-fiber formation. Analysis of experimentally generated bipolar spindles with only one centrosome, as well as of regular, bicentrosomal spindles, reveals that microtubule addition occurs at the kinetochore-proximal ends of K-fibers, and added polymer expands poleward, giving rise to the robust K-fibers of metaphase cells. These results are not compatible with a model for K-fiber formation in which microtubules are added to nascent fibers solely by repetitive “search and capture” of centrosomal microtubule plus ends. Our interpretation is that capture of centrosomal microtubules—when deployed—is limited to early stages in establishment of nascent K-fibers, which then mature through kinetochore-driven outgrowth. When kinetochore capture of centrosomal microtubules is not used, the polar ends of K-fibers grow outward from their kinetochores and usually converge to make a centrosome-free pole.     

Biocompatible epoxy modified bio-based polyurethane nanocomposites: Mechanical property, cytotoxicity and biodegradation

Epoxy modified Mesua ferrea L. seed oil (MFLSO) based polyurethane nanocomposites with different weight % of clay loadings (1%, 2.5% and 5%) have been evaluated as biocompatible materials. The nanocomposites were prepared by ex situ solution technique under high mechanical shearing and ultrasonication at room temperature. The partially exfoliated nanocomposites were characterized by Fourier transform infra-red (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques. The mechanical properties such as tensile strength and scratch hardness were improved 2 and 5 times, respectively by nanocomposites formation. Even the impact resistance improved a little. The thermostability of the nanocomposites was enhanced by about 40 °C. Biodegradation study confirmed 5–10 fold increase in biodegradation rate for the nanocomposites compared to the pristine polymers. All the nanocomposites showed non-cytotoxicity as evident from RBC hemolysis inhibition observed in anti-hemolytic assay carried over the sterilized films. The study reveals that the epoxy modified MFLSO based polyurethane nanocomposites deserve the potential to be applicable as biomaterials.     

The Crystal Structure of L-Leucine Dehydrogenase from Pseudomonas aeruginosa

Leucine dehydrogenase (LDH, EC 1.4.1.9) catalyzes the reversible deamination of branched-chain L-amino acids to their corresponding keto acids using NAD⁺ as a cofactor. LDH generally adopts an octameric structure with D4 symmetry, generating a molecular mass of approximately 400 kDa. Here, the crystal structure of the LDH from Pseudomonas aeruginosa (Pa-LDH) was determined at 2.5 _Å resolution. Interestingly, the crystal structure shows that the enzyme exists as a dimer with C2 symmetry in a crystal lattice. The dimeric structure was also observed in solution using multiangle light scattering coupled with size-exclusion chromatography. The enzyme assay revealed that the specific activity was maximal at 60°C and pH 8.5. The kinetic parameters for three different amino acid and the cofactor (NAD⁺) were determined. The crystal structure represents that the subunit has more compact structure than homologs’ structure. In addition, the crystal structure along with sequence alignments indicates a set of non-conserved arginine residues which are important in stability. Subsequent mutation analysis for those residues revealed that the enzyme activity reduced to one third of the wild type. These results provide structural and biochemical insights for its future studies on its application for industrial purposes.     

Surface Plasmon Induced Polarization Filter Based on Au Wires and Liquid Crystal Infiltrated Photonic Crystal Fibers

The polarization filter characteristics of Au wires and liquid crystal infiltrated photonic crystal fibers are investigated by using the finite element method. The nematic liquid crystal of E7 being injected into cladding air holes is benefit to induce large birefringence under controllable electrical field. The simulation results show that the surface plasmon resonance is strongly inspired by core modes in y-polarized direction. Meanwhile, the coupling between core modes in x-polarized direction and surface plasmon polaritons modes is faint. The confinement losses can achieve 446 dB/cm in y-polarized direction and 0.8 dB/cm in x-polarized direction at wavelength of 1550 nm in one of our designed fiber. The effects of fiber structural parameters and temperature are investigated with a view of tuning and optimizing the confinement loss spectrum. Own to the large contrast of confinement losses in two orthogonal directions, the designed Au wires and liquid crystal infiltrated photonic crystal fibers promise candidate for tunable polarization filter devices.     

表面活性剂液晶模板制备纳米材料的研究进展

纳米材料因为具有纳米效应而被大量研究。表面活性剂由于种类繁多、结构各异,不同的双亲分子形成各种聚集体结构的能力也并不相同,且受多种因素影响,所以在液晶模板合成纳米材料中被广泛应用。近年来表面活性剂液晶模板合成纳米材料的方法得到了迅速发展,正表现出广阔的应用前景。     

Coupling Enhancement of Plasmonic Liquid Photonic Crystal Fiber

Plasmonics - In this paper, the coupling characteristics of a dual-core hybrid plasmonic liquid crystal photonic crystal fiber (PCF) is proposed and analyzed using full-vectorial finite-difference...     

Structure of the nuclease subunit of human mitochondrial RNase P

Mitochondrial RNA polymerase produces long polycistronic precursors that contain the mRNAs, rRNAs and tRNAs needed for mitochondrial translation. Mitochondrial RNase P (mt-RNase P) initiates the maturation of the precursors by cleaving at the 5′ ends of the tRNAs. Human mt-RNase P is only active as a tripartite complex (mitochondrial RNase P proteins 1–3; MRPP1-3), whereas plant and trypanosomal RNase Ps (PRORPs)—albeit homologous to MRPP3—are active as single proteins. The reason for this discrepancy has so far remained obscure. Here, we present the crystal structure of human MRPP3, which features a remarkably distorted and hence non-productive active site that we propose will switch to a fully productive state only upon association with MRPP1, MRPP2 and pre-tRNA substrate. We suggest a mechanism in which MRPP1 and MRPP2 both deliver the pre-tRNA substrate and activate MRPP3 through an induced-fit process.     

Muramic Acid Measurements for Bacterial Investigations in Marine Environments by High-Pressure Liquid Chromatography

Muramic acid, a constituent of procaryotic cell walls, was assayed by high-pressure liquid chromatography in samples from several marine environments (water column, surface microlayer, and sediment) and a bacterial culture. It is used as a microbial biomass indicator. The method gave a good separation of muramic acid from interfering compounds with satisfactory reproducibility. A pseudomonad culture had a muramic acid content of 4.7 × 10⁻¹⁰ to 5.3 × 10⁻¹⁰ μg per cell during growth. In natural water samples, highly significant relationships were found between muramic acid concentrations and bacterial numbers for populations of 10⁸ to 10¹¹ cells per liter. The muramic acid content in natural marine water decreased from 5.3 × 10⁻¹⁰ to 1.6 × 10⁻¹⁰ μg per cell with increasing depth. In coastal sediments exposed to sewage pollution, concentrations of muramic acid, ATP, organic carbon, and total amino acids displayed a parallel decrease with increasing distance from the sewage outlet. Advantages of muramic acid measurement by high-pressure liquid chromatography are its high sensitivity and reduction of preparation steps, allowing a short time analysis.