Physicochemical properties of multicomponent poly(hydroxyalkanoates)

The properties of new five-component poly(hydroxyalkanoates) (PHA) formed by short-and medium-chain monomers synthesized by the bacterium Wautersia eutropha B5786 were studied by X-ray diffraction, IR spectroscopy, differential thermal analysis, and viscometry. The degree of crystallinity of PHA decreased from 72 to 57% as the molar fraction of hydroxyhexanoate increased from 2.5 to 18.0 mol%. The melting temperature (T _m) and decomposition temperature (T _d) of the multicomponent PHA are lower than those for poly(hydroxybutyrate), whose T _m and T _d are 168–170 and 260–265°C, respectively. Both parameters of the multicomponent PHA decrease to 156 and 252°C, respectively, as the hydroxyhexanoate mole fraction is raised. The effect of hydroxyhexanoate on the physicochemical properties of the PHA is similar to that of hydroxyvalerate observed previously.     

Physicochemical properties of two-component polyhydroxyalkanoates based on 3-hydroxybutyrate and 3-hydroxyvalerate

A series of two-component polyhydroxyalkanoates consisting of hydroxybutyrate and hydroxyvalerate monomer at different ratios were synthesized using the bacterium Ralstonia eutropha B5786. The properties of polyhydroxyalkanoates were compared with those of the homopolymer of hydroxybutyric acid by X-ray structure analysis, IR spectroscopy, differential scanning calorimetry, and viscosimetry. With an increase in the molar fraction of hydroxyvalerate, an equalization of the ratio of the crystalline and amorphous phases in the copolymer was observed. The degree of crystallinity of the polymer decreased from 70-80 to 45-50%; in the range of an increase in the hydroxyvalerate molar fraction from several to 25-30 mol%, the dependence was linear. The temperature characteristics, the melting temperature (T(m)), and the degradation temperature (T(d)) were lower in polyhydroxyalkanoates than in polyhydroxybutyrate, for which T(m) and T(d) were 168-170 and 260-265 degrees C, respectively. In the copolymer, as the molar fraction of hydroxyvalerate grew, both parameters decreased. In the range of variation of monomer ratio studied, they decreased to 150-160 and 200-220 degrees C, respectively. No distinct correlation between the composition of the polymer and its molecular mass was found.     

Biosynthesis of multicomponent polyhydroxyalkanoates by Wautersia eutropha

The effect of carbon supply on polyhydroxyalkanoate (PHA) synthesis by bacteria Wautersia eutropha was studied. Synthesis of multicomponent PHA composed of short- and long-chain monomers (C4-C8) by two natural strains (H16 and B5786) under mixotrophic conditions (CO2 + alkane acids as cosubstrates) was demonstrated for the first time. The PHA composition was shown to be dependent on the cosubstrate type. In the presence of odd fatty acids, four- and five-component polymers were synthesized; hydroxybutyrate, hydroxyvalerate, and hydroxyheptanoate were the major monomers, while hydroxyhexanoate and hydroxyoctanoate were minor and irregular. In the presence of even fatty acids, PHA contained not only the corresponding molecules (hydroxyhexanoate and hydroxyoctanoate), but also hydroxyvalerate; synthesis of four-component PHA which contain mainly hydroxybutyrate and hydroxyhexanoate (up to 18 mol %) is therefore possible. A series of four- and five-component PHA was synthesized and their physicochemical characteristics were determined.     

Thermal stability of myosin rod from various species

The radius of gyration and fraction helix as a function of temperature have been determined for myosin rod from four different species: rabbit, frog, scallop, and antarctic fish. Measurements from sodium dodecyl sulfate gel electrophoresis indicate that all particles have the same molecular weight (approximately 130K). All fragments are nearly 100% alpha-helical at low temperatures (0-5 degrees C). The melting profiles for each are qualitatively similar in shape, but their midpoints are shifted along the temperature axis in the following order: antarctic fish (Tm = 33 degrees C), scallop (Tm = 39 degrees C), frog (Tm = 45 degrees C), and rabbit (Tm = 49 degrees C). Corresponding radius of gyration vs temperature profiles for each species are shifted to lower temperatures (approximately 5-8 degrees C) with respect to the optical rotation melting curves. From plots of radius of gyration vs fraction helix, we find a marked drop in the radius of gyration (from 43 to approximately 34 nm) with less than a 5% decrease in fraction helix for rabbit, frog, and antarctic fish rods, whereas the radius of gyration of scallop rod never exceeds 34 nm. Results indicate hinging of the myosin rod of each species. The thermal stabilities of the myosin rods shift in parallel with the working temperature of their respective muscles.     

Theoretical prediction of devitrification tendency: determination of critical warming rates without using finite expansions

Previously, critical warming rates vcr above which ice did not have enough time to crystallize had been roughly evaluated for many wholly amorphous aqueous solutions. These evaluations were obtained by extrapolation of the linear variation of the devitrification temperature Td with log v, where v is the warming rate, observed experimentally between 2.5 and 80 degrees C/min. Theory also gives such a linear variation, but only using the first term of a finite expansion. The other terms can be neglected only for small variations of Td. These evaluations were sufficient for classification of the solutions, but large errors were made in vcr. A new and more accurate method of determination of the variation of Td with v is presented here. The general equation giving in our models the derivative of the quantity of ice formed versus temperature T is differentiated, instead of integrated using a finite expansion. This gives an explicit expression of v versus Td assuming that the ratio xd of the quantity of ice formed at Td to the total quantity of ice formed on warming is constant. Experimentally, xd is constant within a good approximation. Theoretical curves representing the variation of Td with v have been drawn for solutions of 35 or 45% (w/w) 1,2-propanediol in water. Td never reaches the temperature of the end of melting Tm, but as v tends toward infinity, Td tends toward an asymptotic value of 0.96Tm for 35% solute. For that solution, above about 10(3) degrees C/min, Td deviates appreciably from linearity with log v, but 1/Td remains almost linear with log v up to Td congruent to 0.95Tm. Therefore, systematic comparison of the theoretical variation of Td with v with a linear variation of 1/Td with log v has been done, varying the parameters of the equations within the entire experimental range. Similar conclusions can be given for all the solutions. Experimentally for Td = 0.95Tm, the quantity of ice crystallized is generally less than 0.1% of the solution, reaching 1% only once. Therefore, a new definition of the critical warming rate vcr has been used, corresponding to extrapolation of the linear variation of 1/T with log v up to Td = 0.95Tm. New values of vcr have been calculated for all the binary systems previously studied. The order of the solutions is almost the same, but the new values of vcr are significantly smaller than the former.     

Characterisation of polyhydroxyalkanoate copolymers with controllable four-monomer composition

Polyhydroxyalkanoate (PHA) copolymers comprising the four monomers 3-hydroxybutyrate (3HB), 3-hydroxyvalerate (3HV), 3-hydroxy-2-methylvalerate (3HMV) and 3-hydroxy-2-methylbutyrate (3HMB) were generated using the recently discovered Defluviicoccus vanus-related glycogen accumulating organisms (DvGAOs) under anaerobic conditions without applying any nutrient limitations. The composition could be manipulated in a defined range by modifying the ratio of propionate and acetate provided in the feed stream. The PHAs produced were characterised as random copolymers (from propionate alone) or a mixture of random copolymers (from mixture of propionate and acetate) through microstructure analysis using 13C NMR spectroscopy. The sequence distribution of all eight comonomer pairs in the carbonyl region of 3HB and 3HV was identified and assigned with confidence utilising two-dimensional heteronuclear multiple bond coherence (HMBC) spectroscopy. Weight average molecular weights were in the range 390-560 kg/mol. Differential scanning calorimetry (DSC) traces showed that the melting temperature (Tm) varied between 70 and 161 degrees C and glass transition temperature (Tg) ranged from -8 to 0 degrees C. The incorporation of considerable amounts of 3HMV and 3HMB monomer units introduced additional "defects" into the PHBV copolymer structure and hence greatly lowered the crystallinity. The data indicate the potential of these four-monomer PHAs to be employed for practical applications, considering their favourable properties and the cost-effective production process using a mixed culture and simple carbon sources.     

Tailor-made olefinic medium-chain-length poly[(R)-3-hydroxyalkanoates] by Pseudomonas putida GPo1: batch versus chemostat production

Functionalized medium-chain-length polyhydroxyalkanoates (mclPHAs) have gained much interest in research on biopolymers because of their ease of chemical modification. Tailored olefinic mclPHA production from mixtures of octanoic acid and 10-undecenoic acid was investigated in batch and dual (C,N) nutrient limited chemostat cultures of Pseudomonas putida GPo1 (ATCC 29347). In a batch culture, where P. putida GPo1 was grown on a mixture of octanoic acid (58 mol%) and 10-undecenoic acid (42 mol%), it was found that the fraction of aliphatic monomers was slightly lower in mclPHA produced during exponential growth than during late stationary phase. Thus, the total monomeric composition changed over time indicating different kinetics for the two carbon substrates. Chemostat experiments showed that the dual (C,N) nutrient limited growth regime (DNLGR) for 10-undecenoic acid coincided with the one for octanoic acid. Five different chemostats on equimolar mixtures of octanoic acid and 10-undecenoic acid within the DNLGR revealed that the monomeric composition of mclPHA was not a function of the carbon to nitrogen (C(0)/N(0)) ratio in the feed medium but rather of the dilution rate. The fraction of aliphatic monomers in the accumulated mclPHA was slightly lower at high dilution rates and increased towards low dilution rates, again indicating different kinetics for the two carbon substrates in P. putida GPo1.     

Effect of propylgallate on a dipalmitoylphosphatidylglycerol and calcium mixture

Effect of propylgallate (PrG) on the thermotropic behavior of mixtures of dipalmitoylphosphatidylglycerol (DPPG) and Ca2+ was studied by means of differential scanning calorimetry (DSC). In the case of DPPG or DPPG/Ca (molar ratio, 15 : 1), the transition temperature (Tm) of the main transition and the subtransition decreased from 40 degrees C to 29 degrees C and from 29 degrees C to 20 degrees C, respectively, with an increase in the concentration of PrG. The addition of PrG to the DPPG/Ca mixture induced a shoulder on the high temperature side in the reheating scan. Neither PrG nor low concentrations of Ca2+ bind to the Lc phase of DPPG. When the molar ratio of DPPG to Ca was 1 : 1, the subtransition did not occur, that is, only the main transition (Tm = 90 degrees C) appeared. The Tm of the main transition was slightly affected by PrG. On the addition of PrG, another metastable endothermic transition peak (Tm = 78 degrees C) appeared. It is concluded that Ca2+ and PrG inhibit each other's binding.     

Biosynthesis of multicomponent polyhydroxyalkanoates by <Emphasis Type="Italic">Wautersia eutropha</Emphasis>

The effect of carbon supply on polyhydroxyalkanoate (PHA) synthesis by bacteria Wautersia eutropha was studied. Synthesis of multicomponent PHA composed of short-and long-chain monomers (C₄–C₈) by two natural strains (H16 and B5786) under mixotrophic conditions (CO₂ + alkanoic acids as cosubstrates) was demonstrated for the first time. The PHA composition was shown to be dependent on the cosubstrate type. In the presence of odd fatty acids, four-and five-component polymers were synthesized; hydroxybutyrate, hydroxyvalerate, and hydroxyheptanoate were the major monomers, while hydroxyhexanoate and hydroxyoctanoate were minor. In the presence of even fatty acids, PHA contained not only the corresponding molecules (hydroxyhexanoate and hydroxyoctanoate), but also hydroxyvalerate; synthesis of four-component PHA which contain mainly hydroxybutyrate and hydroxyhexanoate (up to 18 mol %) is therefore possible. A series of four-and five-component PHA was synthesized and their physicochemical characteristics were determined.     

The use of oligodeoxynucleotide probes in chaotrope-based hybridization solutions.

Hybridization solutions containing chaotropes may be used to modulate the thermal stability (Tm or Td) of oligodeoxynucleotide (ODN) duplexes or hybrids over a 90 degrees C range. Modulation of Td allows formulation of hybridization solutions that permit ambient temperature hybridization using most combinations of probe length, probe composition, target type, and facilitates development of convenient and rapid assay formats. The conditions required to achieve ODN duplex fidelity, and optimal yields of hybridized product, are described for trichloroacetate, thiocyanate, guanidinium salts and other chaotropic salts. The effects of different solid supports on Td are described. Also, a method is presented that uses chaotropic compounds to reduce background arising from signal ODN probes in a sandwich assay hybridization format.     

Temperature-dependence of isometric tension and cross-bridge kinetics of cardiac muscle fibers reconstituted with a tropomyosin internal deletion mutant

The effect of temperature on isometric tension and cross-bridge kinetics was studied with a tropomyosin (Tm) internal deletion mutant AS-Delta23Tm (Ala-Ser-Tm Delta(47-123)) in bovine cardiac muscle fibers by using the thin filament extraction and reconstitution technique. The results are compared with those from actin reconstituted alone, cardiac muscle-derived control acetyl-Tm, and recombinant control AS-Tm. In all four reconstituted muscle groups, isometric tension and stiffness increased linearly with temperature in the range 5-40 degrees C for fibers activated in the presence of saturating ATP and Ca(2+). The slopes of the temperature-tension plots of the two controls were very similar, whereas the slope derived from fibers with actin alone had approximately 40% the control value, and the slope from mutant Tm had approximately 36% the control value. Sinusoidal analysis was performed to study the temperature dependence of cross-bridge kinetics. All three exponential processes A, B, and C were identified in the high temperature range (30-40 degrees C); only processes B and C were identified in the mid-temperature range (15-25 degrees C), and only process C was identified in the low temperature range (5-10 degrees C). At a given temperature, similar apparent rate constants (2pia, 2pib, 2pic) were observed in all four muscle groups, whereas their magnitudes were markedly less in the order of AS-Delta23Tm < Actin < AS-Tm approximately Acetyl-Tm groups. Our observations are consistent with the hypothesis that Tm enhances hydrophobic and stereospecific interactions (positive allosteric effect) between actin and myosin, but Delta23Tm decreases these interactions (negative allosteric effect). Our observations further indicate that tension/cross-bridge is increased by Tm, but is diminished by Delta23Tm. We conclude that Tm affects the conformation of actin so as to increase the area of hydrophobic interaction between actin and myosin molecules.     

Conformation, pH-induced conformational changes, and thermal unfolding of anti-p24 (HIV-1) monoclonal antibody CB4-1 and its Fab and Fc fragments

Conformation, acid-induced conformational changes and stability of the murine monoclonal antibody CB4-1 directed against the human immunodeficiency virus type 1 capsid protein p24, and its Fab and Fc fragments, were analysed by circular dichroism (CD), fluorescence, and differential scanning calorimetry (DSC) measurements. CD spectra show the characteristics expected for beta-proteins. Lowering the pH to 3.5 reduces the stability, but does not change the conformation. Between pH 3.5 and 2.0 conformational changes and the formation of new structures are indicated. Deconvolution of the bimodal DSC curves of CB4-1 reveals five 'two-state' transitions at pH 7.5. At pH 5 and below, only four transitions are found. Half transition temperatures Tm and molar enthalpy changes DeltaHm gradually decrease at pH 4 and 3.4. At pH 2.1, two low-temperature (Tm=36.9 and 44.1 degrees C) and two high-temperature (Tm=74.6 and 76.8 degrees C) transitions are identified. The Fab and Fc fragments behave similarly. Deconvolution of their monophasic DSC curves yields two 'two-state' transitions for each fragment. Tm and DeltaHm values gradually decrease at pH 4.0 and 3.4; and at pH 2.1 and 2.8 for Fab and Fc, respectively, one of the transitions is found at high temperature (Tm=67.2 and 75.9 degrees C for Fab and Fc, respectively).     

Microcalorimetric study of iodized and noniodized cells and C-phycocyanin of Spirulina platensis

It was shown that eight stages of transition are observed in the heating process of Spirulina platensis cells in temperature range 5-140 degrees C. The first stage covers the temperature range 5-53 degrees C with maximum approximately 45 degrees C. The heat evolved in this temperature range is equal to 380 +/- 20 J/g of dry biomass, it does not change at scanning rate lower than 0.083 degrees C/min and belongs, mainly, to cell respiration in a stationary regime, in the dark. It was shown that endotherm approximately 66 degrees C belongs to denaturation of C-phycocyanin which denaturates in solutions with Td = 64.2 degrees C, deltaHd = 34.7 +/- 2.1 J/g and for it deltaHd(cal)/deltaH(V.H) is equal to 10.8 +/- 1.2. The endotherms with Td equal to 58 and 88 degrees C are connected with denaturation of phycobilisome proteins and endotherm with Td = 48 degrees C and deltaHd = 4.2J/g of dry biomass-with denaturation of protein which, apparently, is connected with cell respiration.     

Biosynthesis and characterization of poly(3-hydroxydodecanoate) by β-oxidation inhibited mutant of Pseudomonas entomophila L48

A medium-chain-length (MCL) polyhydroxyalkanoates (PHAs) producer Pseudomonas entomophila L48 was investigated for microbial production of 3-hydroxydodecanote homopolymer. Pseudomonas entomophila L48 was found to produce MCL PHA consisting of 3-hydroxyhexanoate (3HHx), 3-hydroxyoctanoate (3HO), 3-hydroxydecanoate (3HD), and 3-hydroxydodecanoate (3HDD) from related carbon sources fatty acids. In this study, some of the genes encoding key enzymes in β-oxidation cycle of P. entomophila such as 3-hydroxyacyl-CoA dehydrogenase, 3-ketoacyl-CoA thiolase, and acetyl-CoA acetyltransferase were deleted to study the relationship between β-oxidation and PHA synthesis in P. entomophila. Among the mutants constructed, P. entomophila LAC26 accumulated over 90 wt % PHA consisting of 99 mol % 3HDD. A fed-batch fermentation process carried out in a 6 L automatic fermentor produced 7.3 g L(-1) PHA consisting of over 97 mol % 3HDD fraction. Properties of MCL PHA were significantly improved along with increasing 3HDD contents. P(2.1 mol % 3HD-co-97.9 mol % 3HDD) produced by P. entomophila LAC25 had the widest temperature range between T(g) and T(m), which were -49.3 and 82.4 °C, respectively, in all MCL PHA reported so far. The new type of PHA also represented high crystallinity caused by side-chain crystallization compared with short side chain PHA. For the first time, P(3HDD) homopolymers were obtained.     

First characterization of co-chaperonin protein 10 from hyper-thermophilic Aquifex aeolicus

All known co-chaperonin protein 10 (cpn10) molecules are heptamers of seven identical subunits that are linked together by beta-strand interactions. Here, we report the first characterization of a cpn10 protein from a thermophilic organism: Aquifex aeolicus. Primary-structure alignment of A. aeolicus cpn10 (Aaecpn10) shows high homology with mesophilic cpn10 sequences, except for a unique 25-residue C-terminal extension not found in any other cpn10. Recombinant Aaecpn10 adopts a heptameric structure in solution at pH values above 4 (20 degrees C). Both monomers and heptamers are folded at 20 degrees C, although the thermal stability of the monomers (pH 3; Tm approximately 58 degrees C) is lower than that of the heptamers (pH 7; Tm approximately 115 degrees C). Aaecpn10 functions in a GroEL-dependent in vitro activity assay. Taken together, Aaecpn10 appears similar in secondary, tertiary, and quaternary structure, as well as in many biophysical features, to its mesophilic counterparts despite a functional temperature of 90 degrees C.     

Production of polyhydroxyalkanoates with high 3-hydroxydodecanoate monomer content by fadB and fadA knockout mutant of Pseudomonas putida KT2442

Pseudomonas putida KT2442 produces medium-chain-length (MCL) polyhydroxyalkanoates (PHA) consisting of 3-hydroxyhexanoate (HHx), 3-hydroxyoctanoate (HO), 3-hydroxydecanoate (HD), and 3-hydroxydodecanoate (HDD) from a wide-range of carbon sources. In this study, fadA and fadB genes encoding 3-ketoacyl-CoA thiolase and 3-hydroxyacyl-CoA dehydrogenase in P. putida KT2442 were knocked out to weaken the beta-oxidation pathway. Two-step culture was proven as the optimal method for PHA production in the mutant termed P. putida KTOY06. In a shake-flask culture, when dodecanoate was used as a carbon source, P. putida KTOY06 accumulated 84 wt % PHA, much higher than 50 wt % PHA in its wild type KT2442. The PHA monomer composition was completely different: the HDD fraction in PHA produced by KTOY06 was 41 mol %, much higher compared with 7.5 mol % only in KT2442. The fermentor-scale culture indicated the HDD fraction in PHA decreased during the culture time from 35 to 25 mol % in a one-step fermentation process or from 75 to 49 mol % in a two-step fermentation process. It is for the first time that PHA with a dominant HDD fraction was produced. Thermal and mechanical properties assays indicated that this new type PHA with a high HDD fraction had higher crystallinity and tensile strength than PHA with a low HDD fraction did, demonstrating an improved application property.     

Thermodynamics of the unfolding of the cold-shock protein from Thermotoga maritima.

Proteins from (hyper-)thermophiles are known to exhibit high intrinsic stabilities. Commonly, their thermodynamic characterization is impeded by irreversible side reactions of the thermal analysis or calorimetrical problems. Small single-domain proteins are suitable candidates to overcome these obstacles. Here, the thermodynamics of the thermal denaturation of the recombinant cold-shock protein (Csp) from the hyperthermophilic bacterium Thermotoga maritima (Tm) was studied by differential scanning calorimetry. The unfolding transition can be described over a broad pH range (3.5-8.5) by a reversible two-state process. Maximum stability (DeltaG (25 degrees C)=6.5 kcal/mol) was observed at pH 5-6 where Tm Csp unfolds with a melting temperature at 95 degrees C. The heat capacity difference between the native and the denatured states is 1.1(+/-0.1) kcal/(mol K). At pH 7, thermal denaturation occurs at 82 degrees C. The corresponding free energy profile has its maximum at 30 degrees C with DeltaGN-->U=4.8(+/-0.5) kcal/mol. At the optimal growth temperature of T. maritima (80 degrees C), Tm Csp in the absence of ligands is only marginally stable, with a free energy of stabilization not far beyond the thermal energy. With the known stabilizing effect of nucleic acids in mind, this suggests a highly dynamical interaction of Tm Csp with its target molecules.     

The 6-methoxymethyl derivative of pyrrolo-dC for selective fluorometric detection of guanosine-containing sequences

The beta-cyanoethyl phosphosphoramidite derivatives of 6-methyl- and 6-methoxymethyl-3-(2-deoxy-beta-D-ribofuranosyl)-3H-pyrrolo[2,3-d]pyrimidin-2-one have been synthesized. These monomers have been employed for oligodeoxynucleotide synthesis to evaluate their effect on duplex stability and ability to fluorometrically report on hybridization. The structurally conservative 6-methoxymethyl-substitution results in a pyrrolocytidine that is stabilizing toward hybrid formation (Delta Tm = +1.3 degrees C) whereas the known 6-methylpyrrolocytidine is destabilizing (Delta Tm = -4.7 degrees C), in the sequence examined. The 6-methoxymethylpyrrolocytidine retains excellent mismatch discrimination and its fluorescence is selectively quenched when hybridized to a match oligodeoxynucleotide sequence. The quenching of fluorescence for an internal position is approximately three-fold, whereas a terminal position (5'-end or 3'-end) experienced approximately two-fold decrease in the fluorescence intensity.     

Conformational stability of type I collagen triple helix: evidence for temporary and local relaxation of the protein conformation using a proteolytic probe

Native collagen polypeptides exist in a unique triple helical conformation resistant to most proteinases. In this study, the stability of type I collagen triple helix, employing a mixture of trypsin and alpha-chymotrypsin as a proteolytic probe, was examined. The degradation of type I [3H]collagen was monitored as 3H-labeled peptides soluble in trichloroacetic acid (TCA) or by sodium dodecyl sulfate (SDS)-polyacrylamide slab gel electrophoresis. In one set of experiments, collagen substrates were preincubated at various temperatures for up to 8 h, followed by a 15-min proteolytic treatment at the same temperature. At 43 degrees C, most of the collagen was degraded, while the fraction of the substrate degraded at 40, 38, and 35 degrees C was 53, 41 and 19%, respectively. This fraction was independent of the preincubation time which varied from 10 to 480 min. Thus, at any given temperature, a constant fraction of the collagen substrate was susceptible to proteolysis. Measurement of the midpoint temperature (Tm) of the helix to coil transformation for type I collagen, at neutral pH employing an increasing temperature gradient and brief proteolysis at the individual temperatures, indicated a value of 38.8 degrees C. However, determination of the Tm by employing proteolytic digestions at a constant temperature (30 degrees C) using conditions under which the nonhelical peptides are readily digested to TCA-soluble peptides while native collagen resists such proteolysis, indicated a value of 42.7 degrees C. In further studies, collagen was subjected to continuous proteolysis for up to 24 h. A large fraction of collagen was digested at 30 or 34 degrees C, temperatures well below the Tm of the helix to coil transformation. SDS-polyacrylamide gel electrophoresis of the degradation products obtained at these temperatures revealed multiple cleavage fragments. Finally, temperature double-jump experiments indicated that the destabilization of the triple helix is reversible provided that the Tm of the substrate is not exceeded. The results provide evidence for reversible and local relaxation of the collagen triple helix.     

Conformations, interactions, and thermostabilities of RNA and proteins in bean pod mottle virus: investigation of solution and crystal structures by laser Raman spectroscopy.

We report and interpret laser Raman spectra of the three virion components of bean pod mottle virus (BPMV). The top component of BPMV is an empty capsid; middle and bottom components package the RNA2 and RNA1 genome segments, respectively. All components were investigated as both single crystals and aqueous solutions, the latter over wide ranges of temperature and ionic strength. The isolated RNA2 molecule of BPMV middle component was also investigated in both H2O and D2O solutions. The results permit assessment of RNA and protein structures, their mutual interactions in the virions, and their conformational thermostabilities and comparison of these structural characteristics for solution and crystal states of the particles. The principal findings of this study are (i) The extent of ordered A-form backbone (74%) and of base pairing (38% AU + 22% GC) in unpackaged (aqueous) RNA2 are significantly altered by packaging. The A-form secondary structure of RNA2 is increased by 12 +/- 4%, and guanine base interactions are also substantially increased with packaging. (ii) The thermostability of Raman-monitored secondary structure of unpackaged RNA2 (Tm approximately 43 degrees C) is greatly increased in the packaged state (Tm approximately 53 degrees C). This increase corresponds to a stabilization of the A-form backbone geometry in 15 +/- 5% of genome nucleotides. (iii) Packaging of RNA2 in the middle component stabilizes subunit-subunit interactions of the capsid, as evidenced by a thermal denaturation temperature Td approximately 65 degrees C for the virion, compared with Td approximately 55 degrees C for the empty capsid. (iv) Raman marker-band shifts implicate the purine 7N sites of RNA2 and aromatic side chains of subunits as the principal targets for RNA-subunit interaction. (v) At the conditions of the present experiments (8 degrees C, pH approximately 7, moderate ionic strength), the subunit secondary structures observed for solutions of the top, middle, and bottom components are indistinguishable by Raman spectroscopy from secondary structures observed for corresponding crystalline samples. (vi) On the other hand, side chains of subunits in the top component (empty capsid) yield significantly different Raman intensities in crystalline and solution states. These differences are interpreted as the result of changes in a small number of side-chain environments between crystal and solution. (vii) Similarly, small differences exist between RNA Raman markers of crystalline and aqueous virions, which are attributed to altered environments of nucleotide residues and to a small increase in the amount of A-form backbone geometry upon going from the crystal to the solution.(ABSTRACT TRUNCATED AT 400 WORDS)