Single site catalysis of the F1-ATPase from Saccharomyces cerevisiae and the effect of inorganic phosphate on it

The kinetical characteristics of ATP hydrolysis by mitochondrial F1-ATPase from Saccharomyces cerevisiae (yeast) have been studied under conditions where only a single catalytic site per enzyme molecule bound ATP. Four major features were observed, that is, fast ATP binding to the enzyme, slow product release from the enzyme, an equilibrium close to unity between ATP and products on the enzyme, and promotion of ATP hydrolysis on the second addition of a large excess of ATP (cold chase). These are essentially the same as the kinetical characteristics observed for beef heart mitochondrial F1-ATPase, which were called as unisite catalysis by Grubmeyer et al. (Grubmeyer, C. et al. (1982) J. Biol. Chem. 257, 12092-12100), although the release of a hydrolysis product, Pi, from the yeast enzyme appeared to occur significantly faster than that from the beef enzyme, which resulted in a decreased extent of cold chase promotion of ATP hydrolysis of the yeast enzyme. The yeast F1-ATPase showed unisite catalysis even in the absence of Pi in the reaction mixtures, while it was reported for the beef F1-ATPase that the presence of Pi in the reaction mixture was essential for unisite catalysis (Penefsky, H.S. & Grubmeyer, C. (1984) in H+-ATPase (ATP Synthase) (Papa, S. et al., eds.) pp. 195-204, The ICSU Press). Another difference in the Pi effect on the kinetics was that ATP hydrolysis was initiated without a lag time in the absence of Pi in the case of the yeast enzyme when a 1,000-fold molar excess of ATP per enzyme molecular was mixed with the enzyme.(ABSTRACT TRUNCATED AT 250 WORDS)     

The rotor in the membrane of the ATP synthase and relatives

In recent years, structural information on the F(1) sector of the ATP synthase has provided an insight into the molecular mechanism of ATP catalysis. The structure strongly supports the proposal that the ATP synthase works as a rotary molecular motor. Insights into the membrane domain have just started to emerge but more detailed structural information is needed if the molecular mechanism of proton translocation coupled to ATP synthesis is to be understood. This review will focus mainly on the ion translocating rotor in the membrane domain of the F-type ATPase, and the related vacuolar and archaeal relatives.     

ATP hydrolysis in the betaTP and betaDP catalytic sites of F1-ATPase

The enzyme F1-adenosine triphosphatase (ATPase) is a molecular motor that converts the chemical energy stored in the molecule adenosine triphosphate (ATP) into mechanical rotation of its gamma-subunit. During steady-state catalysis, the three catalytic sites of F1 operate in a cooperative fashion such that at every instant each site is in a different conformation corresponding to a different stage along the catalytic cycle. Notwithstanding a large amount of biochemical and, recently, structural data, we still lack an understanding of how ATP hydrolysis in F1 is coupled to mechanical motion and how the catalytic sites achieve cooperativity during rotatory catalysis. In this publication, we report combined quantum mechanical/molecular mechanical simulations of ATP hydrolysis in the betaTP and betaDP catalytic sites of F1-ATPase. Our simulations reveal a dramatic change in the reaction energetics from strongly endothermic in betaTP to approximately equienergetic in betaDP. The simulations identify the responsible protein residues, the arginine finger alphaR373 being the most important one. Similar to our earlier study of betaTP, we find a multicenter proton relay mechanism to be the energetically most favorable hydrolysis pathway. The results elucidate how cooperativity between catalytic sites might be achieved by this remarkable molecular motor.     

Single-site catalysis of F1-ATPase from thermophilic bacterium PS3 and its dominance in steady-state catalysis at low ATP concentration

Single-site catalysis by F1-ATPase from a thermophilic bacterium PS3 (TF1) was examined by incubating the enzyme with a submolar amount of radioactive ATP. The profile of single-site catalysis by TF1 at 23 degrees C was different from that of beef heart mitochondrial F1-ATPase (MF1). ATP hydrolysis on the enzyme and release of the products was rapid, and subsequent addition of non-radioactive ATP (cold chase) did not promote the hydrolysis of radioactive ATP, indicating that the rate-limiting step was not the step of product release but the step of ATP binding to the enzyme. Thus, the characteristic features of so-called uni-site catalysis were not observed. At 60 degrees C, whether in the presence or absence of phosphate ion, a small amount of bound [alpha, gamma-32P]ATP and cold chase promotion were observed. However, since bound 32P1 was not detected by centrifugal gel filtration, it is not yet certain whether TF1 has typical uni-site characteristics. Based on the hydrolytic turnover rate for single-site catalysis and analysis of the kinetics of steady-state catalysis, it is proposed that single-site catalysis is dominant even in steady-state catalysis at ATP concentrations of less than about 20 microM.     

Synthase (H(+) ATPase): coupling between catalysis, mechanical work, and proton translocation

Coupling with electrochemical proton gradient, ATP synthase (F(0)F(1)) synthesizes ATP from ADP and phosphate. Mutational studies on high-resolution structure have been useful in understanding this complicated membrane enzyme. We discuss mainly the mechanism of catalysis in the beta subunit of F(1) sector and roles of the gamma subunit in energy coupling. The gamma-subunit rotation during catalysis is also discussed.     

ATP synthase--a marvellous rotary engine of the cell

ATP synthase can be thought of as a complex of two motors--the ATP-driven F1 motor and the proton-driven Fo motor--that rotate in opposite directions. The mechanisms by which rotation and catalysis are coupled in the working enzyme are now being unravelled on a molecular scale.     

Structural interpretations of F(0) rotary function in the Escherichia coli F(1)F(0) ATP synthase

F(1)F(0) ATP synthases are known to synthesize ATP by rotary catalysis in the F(1) sector of the enzyme. Proton translocation through the F(0) membrane sector is now proposed to drive rotation of an oligomer of c subunits, which in turn drives rotation of subunit gamma in F(1). The primary emphasis of this review will be on recent work from our laboratory on the structural organization of F(0), which proves to be consistent with the concept of a c(12) oligomeric rotor. From the NMR structure of subunit c and cross-linking studies, we can now suggest a detailed model for the organization of the c(12) oligomer in F(0) and some of the transmembrane interactions with subunits a and b. The structural model indicates that the H(+)-carrying carboxyl of subunit c is located between subunits of the c(12) oligomer and that two c subunits pack in a front-to-back manner to form the proton (cation) binding site. The proton carrying Asp61 side chain is occluded between subunits and access to it, for protonation and deprotonation via alternate entrance and exit half-channels, requires a swiveled opening of the packed c subunits and stepwise association with different transmembrane helices of subunit a. We suggest how some of the structural information can be incorporated into models of rotary movement of the c(12) oligomer during coupled synthesis of ATP in the F(1) portion of the molecule.     

Mechanism of the F(1)F(0)-type ATP synthase, a biological rotary motor

The F(1)F(0)-type ATP synthase is a key enzyme in cellular energy interconversion. During ATP synthesis, this large protein complex uses a proton gradient and the associated membrane potential to synthesize ATP. It can also reverse and hydrolyze ATP to generate a proton gradient. The structure of this enzyme in different functional forms is now being rapidly elucidated. The emerging consensus is that the enzyme is constructed as two rotary motors, one in the F(1) part that links catalytic site events with movements of an internal rotor, and the other in the F(0) part, linking proton translocation to movements of this F(0) rotor. Although both motors can work separately, they must be connected together to interconvert energy. Evidence for the function of the rotary motor, from structural, genetic and biophysical studies, is reviewed here, and some uncertainties and remaining mysteries of the enzyme mechanism are also discussed.     

The a subunit ala-217 --> arg substitution affects catalytic activity of F(1)F(0) ATP synthase

A large number of mutations affecting the F(0) sector of Escherichia coli F(1)F(0) ATP synthase have been constructed and characterized. A subset of the missense mutations resulted in fully assembled enzyme complexes blocked in proton translocation and displaying marked decreases in ATP hydrolysis activity. The catalytic activities of one such mutant enzyme, a(ala-217-->arg), have been determined using both multisite and unisite catalysis conditions. As expected, the V(max) of the a(ala-217-->arg) enzyme was reduced under conditions of saturating substrate concentration. However, the F(0) sector amino acid substitution did not affect nucleotide occupancy of the noncatalytic sites. Moreover, the microscopic rate constants measured using unisite methods yielded no significant differences between the intact wild type F(1)F(0) ATP synthase and the a(ala-217-->arg) mutant enzyme. In general, the values for unisite activities in both preparations were very similar to numbers reported in the literature for E. coli F(1)-ATPase. The results suggest that the a(ala-217-->arg) substitution resulted in a defect in catalytic cooperativity and most likely altered the enzyme by inhibiting the rotational mechanism of F(1)F(0) ATP synthase.     

Mutations in the beta-subunit Thr(159) and Glu(184) of the Rhodospirillum rubrum F(0)F(1) ATP synthase reveal differences in ligands for the coupled Mg(2+)- and decoupled Ca(2+)-dependent F(0)F(1) activities

In the crystal structure of the mitochondrial F(1)-ATPase, the beta-Thr(163) residue was identified as a ligand to Mg(2+) and the beta-Glu(188) as directly involved in catalysis. We replaced the equivalent beta-Thr(159) of the chromatophore F(0)F(1) ATP synthase of Rhodospirillum rubrum with Ser, Ala, or Val and the Glu(184) with Gln or Lys. The mutant beta subunits were isolated and tested for their capacity to assemble into a beta-less chromatophore F(0)F(1) and restore its lost activities. All of them were found to bind into the beta-less enzyme with the same efficiency as the wild type beta subunit, but only the beta-Thr(159) --> Ser mutant restored the activity of the assembled enzyme. These results indicate that both Thr(159) and Glu(184) are not required for assembly and that Glu(184) is indeed essential for all the membrane-bound chromatophore F(0)F(1) activities. A detailed comparison between the wild type and the beta-Thr(159) --> Ser mutant revealed a rather surprising difference. Although this mutant restored the wild type levels and all specific properties of this F(0)F(1) proton-coupled ATP synthesis as well as Mg- and Mn-dependent ATP hydrolysis, it did not restore at all the proton-decoupled CaATPase activity. This clear difference between the ligands for Mg(2+) and Mn(2+), where threonine can be replaced by serine, and Ca(2+), where only threonine is active, suggests that the beta-subunit catalytic site has different conformational states when occupied by Ca(2+) as compared with Mg(2+). These different states might result in different interactions between the beta and gamma subunits, which are involved in linking F(1) catalysis with F(0) proton-translocation and can thus explain the complete absence of Ca-dependent proton-coupled F(0)F(1) catalytic activity.     

Genetic fusions of globular proteins to the epsilon subunit of the Escherichia coli ATP synthase: Implications for in vivo rotational catalysis and epsilon subunit function

The rotational mechanism of ATP synthase was investigated by fusing three proteins from Escherichia coli, the 12-kDa soluble cytochrome b(562), the 20-kDa flavodoxin, and the 28-kDa flavodoxin reductase, to the C terminus of the epsilon subunit of the enzyme. According to the concept of rotational catalysis, because epsilon is part of the rotor a large domain added at this site should sterically clash with the second stalk, blocking rotation and fully inhibiting the enzyme. E. coli cells expressing the cytochrome b(562) fusion in place of wild-type epsilon grew using acetate as the energy source, indicating their capacity for oxidative phosphorylation. Cells expressing the larger flavodoxin or flavodoxin reductase fusions failed to grow on acetate. Immunoblot analysis showed that the fusion proteins were stable in the cells and that they had no effect on enzyme assembly. These results provide initial evidence supporting rotational catalysis in vivo. In membrane vesicles, the cytochrome b(562) fusion caused an increase in the apparent ATPase activity but a minor decrease in proton pumping. Vesicles bearing ATP synthase containing the larger fusion proteins showed reduced but significant levels of ATPase activity that was sensitive to inhibition by dicyclohexylcarbodiimide (DCCD) but no proton pumping. Thus, all fusions to epsilon generated an uncoupled component of ATPase activity. These results imply that a function of the C terminus of epsilon in F(1)F(0) is to increase the efficiency of the enzyme by specifically preventing the uncoupled hydrolysis of ATP. Given the sensitivity to DCCD, this uncoupled ATP hydrolysis may arise from rotational steps of gammaepsilon in the inappropriate direction after ATP is bound at the catalytic site. It is proposed that the C-terminal domain of epsilon functions to ensure that rotation occurs only in the direction of ATP synthesis when ADP is bound and only in the direction of hydrolysis when ATP is bound.     

Catalytic sites of Escherichia coli F1-ATPase. Characterization of unisite catalysis at varied pH.

Using manual rapid-mixing procedures in which small, equal volumes of Escherichia coli F1-ATPase and [gamma-32P]ATP were combined at final concentrations of 2 and 0.2 microM, respectively (i.e., unisite catalysis conditions), it was shown that greater than or equal to 66% of the 32P became bound to the enzyme, with the ratio of bound ATP/bound Pi equal to 0.4 and the rate of dissociation of bound [32P]Pi equal to 3.5 x 10(-3) s-1, similar to previously published values. Azide is known to inhibit cooperative but not unisite catalysis in F1-ATPase [Noumi, T., Maeda, M., & Futai, M. (1987) FEBS Lett. 213, 381-384]. In the presence of 1 mM sodium azide, 99% of the 32P became bound to the enzyme, with the ratio of bound ATP/bound Pi being 0.57. These experiments demonstrated that when conditions are used which minimize cooperative catalysis, most or all of the F1 molecules bind substoichiometric ATP tightly, hydrolyze it with retention of bound ATP and Pi, and release the products slowly. The data justify the validity of previously published rate constants for unisite catalysis. Unisite catalysis in E. coli F1-ATPase was studied at varied pH from 5.5 to 9.5 using buffers devoid of phosphate. Rate constants for ATP binding/release, ATP hydrolysis/resynthesis, Pi release, and ADP binding/release were measured; the Pi binding rate constant was inferred from the delta G for ATP hydrolysis. ATP binding was pH-independent; ATP release accelerated at higher pH. The highest KaATP (4.4 x 10(9) M-1) was seen at physiological pH 7.5.(ABSTRACT TRUNCATED AT 250 WORDS)     

Observation of calcium-dependent unidirectional rotational motion in recombinant photosynthetic F1-ATPase molecules

ATP hydrolysis and synthesis by the F(0)F(1)-ATP synthase are coupled to proton translocation across the membrane in the presence of magnesium. Calcium is known, however, to disrupt this coupling in the photosynthetic enzyme in a unique way: it does not support ATP synthesis, and CaATP hydrolysis is decoupled from any proton translocation, but the membrane does not become leaky to protons. Understanding the molecular basis of these calcium-dependent effects can shed light on the as yet unclear mechanism of coupling between proton transport and rotational catalysis. We show here, using an actin filament gamma-rotation assay, that CaATP is capable of sustaining rotational motion in a highly active hybrid photosynthetic F(1)-ATPase consisting of alpha and beta subunits from Rhodospirillum rubrum and gamma subunit from spinach chloroplasts (alpha(R)(3)beta(R)(3)gamma(C)). The rotation was found to be similar to that induced by MgATP in Escherichia coli F(1)-ATPase molecules. Our results suggest a possible long range pathway that enables the bound CaATP to induce full rotational motion of gamma but might block transmission of this rotational motion into proton translocation by the F(0) part of the ATP synthase.     

Electrostatic interactions in catalytic centers of F1-ATPase

The first part of this paper is a brief review of works concerned with the mechanisms of functioning of F0F1-ATP synthases. F0F1-ATP syntheses operate as rotating molecular machines that provide the synthesis of ATP from ADP and inorganic phosphate (Pi) in mitochondria, chloroplasts, and bacteria at the expense of the energy of electrochemical gradient of hydrogen ions generated across energy-transducing mitochondrial, chloroplast or, bacterial membranes. A distinguishing feature of these enzymes is that they operate as rotary molecular motors. In the second part of the work, we calculated the contribution of electrostatic interactions between charged groups of a substrate (MgATP), reaction products (MgADP and Pi), and charged amino acid residues of the F1-ATPase molecule to energy changes associated with the binding of ATP and its chemical transformations in the catalytic centers located at the interface of the alpha- and beta-subunits of the enzyme (oligomer complex alpha 3 beta 3 gamma of bovine mitochondrial ATPase). The catalytic cycle of ATP hydrolysis considered in the work includes conformational changes of alpha- and beta-subunits caused by unidirectional rotations of the central gamma-subunit. The results of our calculations are consistent with the idea that the energetically favorable process of ATP binding to the "open" catalytic center of F1-ATPase initiates the rotation of the gamma-subunit followed by ATP hydrolysis in another ("closed") catalytic center of the enzyme.     

The native mitochondrial F1-inhibitor protein complex carries out uni- and multisite ATP hydrolysis

The rate of ATP hydrolysis under multi- and unisite conditions was determined in the native F1-inhibitor protein complex of bovine heart mitochondria (Adolfsen, R., MacClung, J.A., and Moudrianakis, E.N. (1975) Biochemistry 14, 1727-1735). Aurovertin was used to distinguish between hydrolytic activity catalyzed by the F1-ATPase or the F1-inhibitor protein (F1.I) complex. We found that incubation of aurovertin with the F1.I complex, prior to the addition of substrate, results in a stimulation of the hydrolytic activity from 1 to 8-10 mumol min-1 mg-1. The addition of aurovertin to a F1.I complex simultaneously with ATP results in a 30% inhibition with respect to the untreated F1.I. In contrast, if the F1.I complex is activated up to a hydrolytic activity of 80 mumol min-1 mg-1, aurovertin inhibits the enzyme in a manner similar to that described for F1-ATPase devoid of the inhibitor protein. The native F1.I complex catalyzes the hydrolysis of ATP under conditions for single catalytic site, liberating 0.16-0.18 mol of Pi/mol of enzyme. Preincubation with aurovertin before the addition of substrate had no effect under these conditions. On the other hand, if the F1.I ATPase was allowed to hydrolyze ATP at a single catalytic site, catalysis was inhibited by 98% by aurovertin. In F1-ATPase, the hydrolysis of [gamma-32P]ATP bound to the first catalytic site is promoted by the addition of excess ATP, in the presence or absence of aurovertin. Under conditions for single site catalysis, hydrolysis of [gamma-32P]ATP in the F1.I complex was not promoted by excess ATP. We conclude that the endogenous inhibitor protein regulates catalysis by promoting the entrapment of adenine nucleotides at the high affinity catalytic site, thus hindering cooperative ATP hydrolysis.     

Catalytic control and coupling efficiency of the Escherichia coli FoF1 ATP synthase: influence of the Fo sector and epsilon subunit on the catalytic transition state

The rate-limiting transition state of steady-state ATP hydrolysis and synthesis reactions in the F(o)F(1) ATP synthase involves the rotation of the gamma, epsilon, and c subunits. To probe the role of the transport and coupling mechanisms in controlling catalysis, kinetic and thermodynamic parameters of ATP hydrolysis were determined for enzymes in the presence of the detergent lauryldimethylamine oxide (LDAO), which uncouples active transport and disables the inhibitory effect of the epsilon subunit. At 5 mM LDAO or greater, the inhibitory effects of epsilon subunit are abrogated in both purified F(1) and membranous F(o)F(1). In these conditions, LDAO solubilized F(o)F(1) has a higher k(cat) for ATP hydrolysis than F(1). These results indicate an influence of F(o) on F(1) even though catalysis is uncoupled from transport. The alpha(3)beta(3)gamma complex free of the epsilon subunit is activated at a lower concentration of 0.5 mM LDAO. Significantly, the gammaY205C mutant enzyme is similarly activated at 0.5 mM LDAO, suggesting that the mutant enzyme lacks epsilon inhibition. The gammaY205C F(o)F(1), which has a k(cat) for ATP hydrolysis 2-fold higher than wild type, has an ATP synthesis rate 3-fold lower than wild type, showing that coupling is inefficient. Arrhenius and isokinetic analyses indicate that enzymes that are free of epsilon subunit inhibition have a different transition-state structure from those under the influence of the epsilon subunit. We propose that the epsilon subunit is one of the factors that determines the proper transition-state structure, which is essential for efficient coupling.     

Structure of the gamma-epsilon complex of ATP synthase

ATP synthases (F(1)F(o)-ATPases) use energy released by the movement of protons down a transmembrane electrochemical gradient to drive the synthesis of ATP, the universal biological energy currency. Proton flow through F(o) drives rotation of a ring of c-subunits and a complex of the gamma and epsilon-subunits, causing cyclical conformational changes in F(1) that are required for catalysis. The crystal structure of a large portion of F(1) has been resolved. However, the structure of the central portion of the enzyme, through which conformational changes in F(o) are communicated to F(1), has until now remained elusive. Here we report the crystal structure of a complex of the epsilon-subunit and the central domain of the gamma-subunit refined at 2.1 A resolution. The structure reveals how rotation of these subunits causes large conformational changes in F(1), and thereby provides new insights into energy coupling between F(o) and F(1).     

Structure of dimeric ATP synthase from mitochondria: an angular association of monomers induces the strong curvature of the inner membrane

Respiration in all cells depends upon synthesis of ATP by the ATP synthase complex, a rotary motor enzyme. The structure of the catalytic moiety of ATP synthase, the so-called F(1) headpiece, is well established. F(1) is connected to the membrane-bound and ion translocating F(0) subcomplex by a central stalk. A peripheral stalk, or stator, prevents futile rotation of the headpiece during catalysis. Although the enzyme functions as a monomer, several lines of evidence have recently suggested that monomeric ATP synthase complexes might interact to form a dimeric supercomplex in mitochondria. However, due to its fragility, the structure of ATP synthase dimers has so far not been precisely defined for any organism. Here we report the purification of a stable dimeric ATP synthase supercomplex, using mitochondria of the alga Polytomella. Structural analysis by electron microscopy and single particle analysis revealed that dimer formation is based on specific interaction of the F(0) parts, not the F(1) headpieces which are not at all in close proximity. Remarkably, the angle between the two F(0) part is about 70 degrees, which induces a strong local bending of the membrane. Hence, the function of ATP synthase dimerisation is to control the unique architecture of the mitochondrial inner membrane.     

Reaction mechanism of the membrane-bound ATPase of submitochondrial particles from beef heart

Submitochondrial particles from beef heart, washed with dilute solutions of KCl so as to activate the latent, membrane-bound ATPase, F1, may be used to study single site catalysis by the enzyme. [gamma-32P]ATP, incubated with a molar excess of catalytic sites, a condition which favors binding of substrate in only a single catalytic site on the enzyme, is hydrolyzed via a four-step reaction mechanism. The mechanism includes binding in a high affinity catalytic site, Ka = 10(12)M-1, a hydrolytic step for which the equilibrium constant is near unity, and two product release steps in which Pi dissociates from catalytic sites about 10 times more rapidly than ADP. Catalysis by the membrane-bound ATPase also is characterized by a 10(6)-fold acceleration in the rate of net hydrolysis of [gamma-32P]ATP, bound in the high affinity catalytic site, that occurs when substrate is made available to additional catalytic sites on the enzyme. These aspects of the reaction mechanism of the ATPase of submitochondrial particles closely parallel the reaction mechanism determined for solubilized, homogeneous F1 (Grubmeyer, C., Cross, R. L., and Penefsky, H. S. (1982) J. Biol. Chem. 257, 12092-12100). The finding that removal of the enzyme from the membrane does not significantly alter the properties of single site catalysis lends support to models of ATP synthesis in oxidative phosphorylation, catalyzed by membrane-bound F1, that have been based on the study of the soluble enzyme.