Atomic force microscopy imaging of double stranded DNA and RNA.

A procedure for imaging long DNA and double stranded RNA (dsRNA) molecules using Atomic Force Microscopy (AFM) is described. Stable binding of double stranded DNA molecules to the flat mica surface is achieved by chemical modification of freshly cleaved mica under mild conditions with 3-aminopropyltriethoxy silane. We have obtained striking images of intact lambda DNA, Hind III restriction fragments of lambda DNA and dsRNA from reovirus. These images are stable under repeated scanning and measured contour lengths are accurate to within a few percent. This procedure leads to strong DNA attachment, allowing imaging under water. The widths of the DNA images lie in the range of 20 to 80nm for data obtained in air with commercially available probes. The work demonstrates that AFM is now a routine tool for simple measurements such as a length distribution. Improvement of substrate and sample preparation methods are needed to achieve yet higher resolution.     

Atomic Force Microscopy Imaging of Double Stranded DNA and RNA

Abstract

A procedure for imaging long DNA and double stranded RNA (dsRNA) molecules using Atomic Force Microscopy (AFM) is described. Stable binding of double stranded DNA molecules to the flat mica surface is achieved by chemical modification of freshly cleaved mica under mild conditions with 3-aminopropyltriethoxy silane. We have obtained striking images of intact lambda DNA, Hind III restriction fragments of lambda DNA and dsRNA from reovirus. These images are stable under repeated scanning and measured contour lengths are accurate to within a few percent. This procedure leads to strong DNA attachment, allowing imaging under water. The widths of the DNA images lie in the range of 20 to 80nm for data obtained in air with commercially available probes. The work demonstrates that AFM is now a routine tool for simple measurements such as a length distribution. Improvement of substrate and sample preparation methods are needed to achieve yet higher resolution.     

Direct observation of defect structure in protein crystals by atomic force and transmission electron microscopy.

We have examined the structure of S-layers isolated from Sulfolobus acidocaldarius using atomic force microscopy (AFM) and transmission electron microscopy (TEM). From the AFM images, we were able to directly observe individual dimers of the crystal, defects in the crystal structure, and twin boundaries. We have identified two types of boundaries, one defined by a mirror plane and the other by a glide plane. This work shows that twin boundaries are highly structured regions that are directly related to the organization of units within each crystal domain. Projection maps from TEM images have shown that there are significant differences in the final average maps has allowed us to relate high magnification views obtained by AFM to the relatively high resolution information obtained by electron microscopy and image processing.     

Atomic force microscopy of pollen grains,cellulose microfibrils,and protoplasts

Summary Atomic force microscopy (AFM) holds unique prospects for biological microscopy, such as nanometer resolution and the possibility of measuring samples in (physiological) solutions. This article reports the results of an examination of various types of plant material with the AFM. AFM images of the surface of pollen grains ofKalanchoe blossfeldiana andZea mays were compared with field emission scanning electron microscope (FESEM) images. AFM reached the same resolutions as FESEM but did not provide an overall view of the pollen grains. Using AFM in torsion mode, however, it was possible to reveal differences in friction forces of the surface of the pollen grains. Cellulose microfibrils in the cell wall of root hairs ofRaphanus sativus andZ. mays were imaged using AFM and transmission electron microscopy (TEM). Imaging was performed on specimens from which the wall matrix had been extracted. The cell wall texture of the root hairs was depicted clearly with AFM and was similar to the texture known from TEM. It was not possible to resolve substructures in a single microfibril. Because the scanning tip damaged the fragile cells, it was not possible to obtain images of living protoplasts ofZ. mays, but images of fixed and dried protoplasts are shown. We demonstrate that AFM of plant cells reaches resolutions as obtained with FESEM and TEM, but obstacles still have to be overcome before imaging of living protoplasts in physiological conditions can be realized.Abbreviations AFM atomic force microscope - FESEM field emission scanning electron microscope - PyMS pyrolysis mass spectrometry - TEM transmission electron microscope     

High-resolution visualization of fibrinogen molecules and fibrin fibers with atomic force microscopy

We report an atomic force microscopy (AFM) study of fibrinogen molecules and fibrin fibers with resolution previously achieved only in few electron microscopy images. Not only are all objects triads, but the peripheral D regions are resolved into the two subdomains, apparently corresponding to the βC and γC domains. The conformational analysis of a large population of fibrinogen molecules on mica revealed the two most energetically favorable conformations characterized by bending angles of ～100 and 160 degrees. Computer modeling of the experimental images of fibrinogen molecules showed that the AFM patterns are in good agreement with the molecular dimensions and shapes detected by other methods. Imaging in different environments supports the expected hydration of the fibrinogen molecules in buffer, whereas imaging in humid air suggests the 2D spreading of fibrinogen on mica induced by an adsorbed water layer. Visualization of intact hydrated fibrin fibers showed cross-striations with an axial period of 24.0 ± 1.6 nm, in agreement with a pattern detected earlier with electron microscopy and small-angle X-ray diffraction. However, this order is clearly detected on the surface of thin fibers and becomes less discernible with the fiber's growth. This structural change is consistent with the proposal that thinner fibers are denser than thicker ones, that is, that the molecule packing decreases with the increasing of the fibers' diameter.     

Atomic force microscopy imaging of dried or living bacteria.

Atomic force microscopy (AFM) was used to obtain micrographs of dried bacteria in air, and of living ones in their culture medium. Images of dried bacteria were very similar to images obtained elsewhere by the much more complicated cryoetching preparation technique for transmission electron microscopy. Living bacteria were immobilized on a poly-L-lysine film, and directly observed in their culture medium at a resolution unattainable by any other technique applicable to living material. The images were similar to those obtained in scanning electron microscopy where the specimen must be fixed, dried and coated with conductive material, and as a result, no longer viable.     

Atomic force microscopy of three-dimensional membrane protein crystals. Ca-ATPase of sarcoplasmic reticulum.

We have observed three-dimensional crystals of the calcium pump from sarcoplasmic reticulum by atomic force microscopy (AFM). From AFM images of dried crystals, both on graphite and mica, we measured steps in the crystal thickness, corresponding to the unit cell spacing normal to the substrate. It is known from transmission electron microscopy that crystal periodicity in the plane of the substrate is destroyed by drying, and it was therefore not surprising that we were unable to observe this periodicity by AFM. Thus, we were motivated to use the AFM on hydrated crystals. In this case, crystal adsorption appeared to be a limiting factor, and our studies indicate that adsorption is controlled by the composition of the medium and by the physical-chemical properties of the substrate. We used scanning electron microscopy to determine the conditions yielding the highest adsorption of crystals, and, under these conditions, we have obtained AFM images of hydrated crystals with a resolution similar to that observed with dried samples (i.e., relatively poor). In the same preparations, we have observed lipid bilayers with a significantly better resolution, indicating that the poor quality of crystal images was not due to instrumental limitations. Rather, we attribute poor images to the intrinsic flexibility of these multilamellar crystals, which apparently allow movement of one layer relative to another in response to shear forces from the AFM tip. We therefore suggest some general guidelines for future studies of membrane proteins with AFM.     

Sugar Beet Pectin–Protein Complexes

The physical structure of pectin extracted from fresh sugar beet has been examined by atomic force microscopy (AFM). The images obtained reveal that these extracts contain a mixture of pectin polysaccharides and protein–pectin complexes. The AFM data demonstrate, for the first time, that these protein–pectin complexes consist of pectin molecules with protein attached to one end of the pectin chain.     

Atomic force microscopy of long and short double-stranded, single-stranded and triple-stranded nucleic acids.

Atomic force microscopy (AFM, also called scanning force microscopy) is proving to be a useful technique for imaging DNA. Thus it is important to push the limits of AFM imaging in order to explore both what types of DNA can be reliably imaged and identified and also what substrates and methods of sample preparation are suitable. The following advances in AFM of DNA are presented here. (i) DNA molecules as short as 25 bases can be seen by AFM. The short single-stranded DNAs imaged here (25 and 50 bases long) appeared globular in the AFM, perhaps because they are all capable of intramolecular base pairing and because the DNAs were in a Mg(ll) buffer, which facilitates intramolecular cross-bridging. (ii) AFM images in air of short double-stranded DNA molecules, 100-200 bp, gave lengths consistent with A-DNA. (iii) AFM images of poly (A) show both short bent lumpy molecules with an apparent persistence length of 40 nm and long straight molecules with an apparent persistence length of 600 nm. For comparison, the apparent persistence length for double-stranded DNA from phX-174 under the same conditions was 80 nm. (iv) Structures believed to be triple- stranded DNA were seen in samples of poly(dA.poly(dT) and poly (dG).poly(dC). These structures were twice as high as double-stranded DNA and the same width. (v) Entire molecules of lambda DNA, approx. 16 micron long, were imaged clearly in overlapping scans. (vi) Plasmid DNA was imaged on oxidized silicon, although less clearly than on mica.     

Single-molecule measurements of the persistence length of double-stranded RNA

Over the past few years, it has become increasingly apparent that double-stranded RNA (dsRNA) plays a far greater role in the life cycle of a cell than previously expected. Numerous proteins, including helicases, polymerases, and nucleases interact specifically with the double helix of dsRNA. To understand the detailed nature of these dsRNA-protein interactions, the (bio)chemical, electrostatic, and mechanical properties of dsRNA need to be fully characterized. We present measurements of the persistence length of dsRNA using two different single-molecule techniques: magnetic tweezers and atomic force microscopy. We deduce a mean persistence length for long dsRNA molecules of 63.8 +/- 0.7 nm from force-extension measurements with the magnetic tweezers. We present atomic force microscopy images of dsRNA and demonstrate a new method for analyzing these, which yields an independent, yet consistent value of 62 +/- 2 nm for the persistence length. The introduction of these single-molecule techniques for dsRNA analysis opens the way for real-time, quantitative analysis of dsRNA-protein interactions.     

Tobacco mosaic virus as an AFM tip calibrator

The study of high-resolution topographic surfaces of isolated single molecules is one of the applications of atomic force microscopy (AFM). Since tip-induced distortions are significant in topographic images the exact AFM tip shape must be known in order to correct dilated AFM height images using mathematical morphology operators. In this work, we present a protocol to estimate the AFM tip apex radius using tobacco mosaic virus (TMV) particles. Among the many advantages of TMV, are its non-abrasivity, thermal stability, bio-compatibility with other isolated single molecules and stability when deposited on divalent ion pretreated mica. Compared to previous calibration systems, the advantage of using TMV resides in our detailed knowledge of the atomic structure of the entire rod-shaped particle. This property makes it possible to interpret AFM height images in term of the three-dimensional structure of TMV. Results obtained in this study show that when a low imaging force is used, the tip is sensing viral protein loops whereas at higher imaging force the tip is sensing the TMV particle core. The known size of the TMV particle allowed us to develop a tip-size estimation protocol which permits the successful erosion of tip-convoluted AFM height images. Our data shows that the TMV particle is a well-adapted calibrator for AFM tips for imaging single isolated biomolecules. The procedure developed in this study is easily applicable to any other spherical viral particles.     

Study of microorganism genome DNA by atomic force microscopy

The potential of atomic force microscopy (AFM) for the investigation of peculiarities of microorganisms genome structure is demonstrated. AFM images of phage lambda DNA linear molecules and supercoiled mica in buffer solution was imaged in air. New experimental method of DNA stretching based on using amino-modified mica with a decreased surface density of active amino-groups is proposed. Stretched molecules of phage lambda DNA were imaged by AFM.     

Visual representation by atomic force microscopy (AFM) of tomato spotted wilt virus ribonucleoproteins.

Atomic force microscopy (AFM) allows the observation of biological material without fixation procedures. Here we present AFM images of ribonucleoproteins (nucleocapsids) derived from a plant infecting RNA virus (tomato spotted wilt virus, TSWV), which have been recorded in contact mode. The nucleocapsids, prepared from systemically infected leaves of tobacco, were spreaded on a glass surface and dried in air, and appeared as regularly formed rings, resembling the proposed pseudocircular and panhandle structure of encapsidated genomic RNA. Average values between 1300 and 2200 nm of nucleocapsid lengths could be related to dimensions estimated by electron microscopy, thereby validating a filamentous configuration of the TSWV ribonucleoproteins. However, to our knowledge regular, ring-like forms of ribonucleoproteins have not been obtained by electron microscopy, which rather showed an amorphous structure of the virus particles. Hence, the AFM approach provides a starting point for further detailed studies on TSWV ribonucleoprotein complexes.     

Molecular resolution imaging of macromolecular crystals by atomic force microscopy.

Atomic force microscopy (AFM) images at the molecular level have been obtained for a number of different protein and virus crystals. They can be utilized in some special cases to obtain information useful to crystal structure analyses by x-ray diffraction. In particular, questions of space group enantiomer, the packing of molecules within a unit cell, the number of molecules per asymmetric unit, and the dispositions of multiple molecules within the asymmetric unit may be resolved. In addition, because of the increasing sensitivity and resolution of the AFM technique, some molecular features of very large asymmetric units may be within reach. We describe here high-resolution studies, using AFM, to visualize individual molecules and viruses in their crystal lattices. These investigations included fungal lipase, lysozyme, thaumatin, canavalin, and satellite tobacco mosaic virus (STMV).     

Atomic force microscopy of the myosin molecule.

Atomic force microscopy (AFM) has been used to study the structure of rabbit skeletal muscle myosin deposited onto a mica substrate from glycerol solution. Images of the myosin molecule have been obtained using contact mode AFM with the sample immersed in propanol. The molecules have two heads at one end of a long tail and have an appearance similar to those prepared by glycerol deposition techniques for electron microscopy, except that the separation of the two heads is not so well defined. The average length of the tail (155 +/- 5 nm) agrees well with previous studies. Bends in the myosin tail have been observed at locations similar to those observed in the electron microscope. By raising the applied force, it has been possible locally to separate the two strands of the alpha-helical coiled-coil tail. We conclude that the glycerol-mica technique is a useful tool for the preparation of fibrous proteins for examination by scanning probe microscopy.     

An antitumor osteotropic agent based on tumor necrosis factor

An osteotropic agent based on the human recombinant tumor necrosis factor alpha (TNF-alpha) has been designed for treatment of bone metastases. It represents a molecular construct containing yeast double- stranded ribonucleic acid (dsRNA) covered by the conjugate of polyanion dextran with TNF-alpha and bisphosphonate alendronic acid. This construct is characterized by the combination of substances possessing antitumor activity (TNF-alpha, dsRNA) and a vector molecule (bisphosphonate) providing tropism to hydroxyapatite, the main mineral component of the bone tissue matrix. The conjugation conditions were optimized and the conjugates of TNF-alpha and alendronic acid with dextran were synthesized. The molecular constructs were obtained by self-assembly, and the resultant complexes were separated by gel filtration on Sepharose CL-6B. The electrophoretic analysis has shown decreased mobility of dsRNA in the complex with the conjugate as compared to mobility of the original dsRNA. This confirms formation of the designed structures. Transmission electron microscopy confirmed the presence of particles with sizes of 30–40 nm in the drug preparation. Evaluation by the sorption/desorption method showed a higher affinity of TNF-alpha conjugates to hydroxyapatite as compared to original TNF-alpha molecules (from 1.0–1.8 mol/L vs. 0.3 mol/L of potassium phosphate buffer for desorption, respectively).     

Imaging biomolecule arrays by atomic force microscopy.

We describe here a method for constructing ordered molecular arrays and for detecting binding of biomolecules to these arrays using atomic force microscopy (AFM). These arrays simplify the discrimination of surface-bound biomolecules through the spatial control of ligand presentation. First, photolithography is used to spatially direct the synthesis of a matrix of biological ligands. A high-affinity binding partner is then applied to the matrix, which binds at locations defined by the ligand array. AFM is then used to detect the presence and organization of the high-affinity binding partner. Streptavidin-biotin arrays of 100 x 100 microns and 8 x 8 microns elements were fabricated by this method. Contact and noncontact AFM images reveal a dense lawn of streptavidin specific to the regions of biotin derivatization. These protein regions are characterized by a height profile of approximately 40 A over the base substrate with a 350-nm edge corresponding to the diffraction zone of the photolithography. High resolution scans reveal a granular topography dominated by 300 A diameter features. The ligand-bound protein can then be etched from the substrate using the AFM tip, leaving an 8 A shelf that probably corresponds to the underlying biotin layer.     

Ultrastructural studies on the collagen of the marine sponge Chondrosia reniformis Nardo

The ultrastructure of isolated fibrils of Chondrosia reniformis sponge collagen was investigated by collecting characteristic data, such as fibril thickness, width, D-band periodicity, and height modulation, using atomic force microscopy (AFM) and transmission electron microscopy (TEM). Therefore an adapted pre-processing of the insoluble collagen into homogeneous suspensions using neutral buffer solutions was essential, and several purification steps have been developed. Fourier transform infrared reflection-absorption spectroscopy (FT-IRAS) of the purified sponge collagen showed remarkable analogy of peak positions and intensities with the spectra of fibrillar calf skin type I collagen, despite the diverse phylogenetic and evolutionary origin. The sponge collagen's morphology is compared with that of other fibrillar collagens, and the typical banding of the separated single fibrils is discussed by comparison of topographical data obtained using AFM and corresponding TEM investigations using common staining methods. As the TEM images of the negatively stained fibrils showed alternating dark and light bands, AFM revealed a characteristic periodicity of protrusions (overlap zones) followed by two equal interband regions (gap zones). AFM and TEM results were correlated and multiperiodicity in Chondrosia collagen's banding is demonstrated. The periodic dark bands observed in TEM images correspond directly to the periodic protrusions seen by AFM. As a result, we provide an improved, updated model of the collagen's structure and organization.     

Surface Characteristics of Gram-Negative and Gram-Positive Bacteria in an Atomic Force Microscope Image

Bacterial images can be obtained rather easily with an atomic-force microscope (AFM) in the magnification range of 5,000 to 30,000 times without any pretreatment of the specimens for such observations as chemical fixation, dehydration or staining. The bacterial shapes or the presence of flagella can be clearly recognized in these magnification ranges. In addition, we were also able to distinguish between Gramnegative and Gram-positive bacteria based on the specific wavy surface appearance of the former. AFM could thus be a useful tool for the identification of bacteria in the resolution range between electron and light microscopy.     

利用原子力显微镜对A型流感病毒的形态学研究

利用透射电子显微镜(TEM)和原子力显微镜(AFM)观察流感病毒(H1N1),探讨AFM在病毒形态研究中的应用,为病毒形态学研究提供一种新型、简便、快捷的工具.TEM采用磷钨酸负染方法,AFM采用轻敲模式在大气常温下扫描成像,并对主要指标长度(直径)、Ra、Rq等进行测量.两种方法最终得到相似的形态学结果,流感病毒呈球状、丝状,并有一些形状介于两者之间.TEM提供了流感病毒二维图像,可见钉状突起,AFM则呈现了流感病毒三维图像,且可见病毒表面有凹凸不平的特征和边缘有齿轮状的突起,同时获得表面粗糙度等可以量化指标.与TEM观察相比,原子力显微镜是一种制样简单、观察直观的新型病毒形态学研究工具,其表征参数可以作为病毒形态学研究的量化指标.