Facile purification of mono-PEGylated interleukin-1 receptor antagonist and its characterization with multi-angle laser light scattering

Recombinant human interleukin-1 receptor antagonist (rhIL-1ra) was chemically conjugated with succinimidyl carbonate monomethoxyl polyethylene glycols of 5 kDa (SC-PEG_5k) and 10 kDa (SC-PEG_10k) molecular weight. A facile purification of the conjugates was achieved by one-step cationic exchange chromatography. The purity of mono-PEGylated protein was greater than 95%. The purified conjugate was characterized by multi-angle laser light scattering (MALLS) for determining the apparent gyration radius (r_g) and hydrodynamic radius (r_h). MALLS results showed that the conjugation of PEG markedly enhanced r_g and r_h of parent protein (r_g: from 15.7 to 48.2 nm for the PEG_5k and 81.9 nm for the PEG_10k; r_h: from 4.2 to 58.4 nm for the PEG_5k and 102.3 nm for the PEG_10k). The PEGylated rhIL-1ra retained 44.6% of binding activities to the cell receptor for PEG_5k and 40.2% for PEG_10k, compared to the original protein.     

Branched polyethylene glycol for protein precipitation

The use of linear PEGs for protein precipitation raises the issues of high viscosity and limited selectivity. This paper explores PEG branching as a way to alleviate the first problem, by using 3-arm star as the model branched structure. 3-arm star PEGs of 4,000 to 9,000 Da were synthesized and characterized. The effects of PEG branching were then elucidated by comparing the branched PEG precipitants to linear versions of equivalent molecular weights, in terms of IgG recovery from CHO cell culture supernatant, precipitation selectivity, solubility of different purified proteins, and precipitation kinetics. Two distinct effects were observed: PEG branching reduced dynamic viscosity; secondly, the branched PEGs precipitated less proteins and did so more slowly. Precipitation selectivity was largely unaffected. When the branched PEGs were used at concentrations higher than their linear counterparts to give similar precipitation yields, the dynamic viscosity of the branched PEGs were noticeably lower. Interestingly, the precipitation outcome was found to be a strong function of PEG hydrodynamic radius, regardless of PEG shape and molecular weight. These observations are consistent with steric mechanisms such as volume exclusion and attractive depletion.     

Molecular dynamics studies of polyethylene oxide and polyethylene glycol: hydrodynamic radius and shape anisotropy

A revision (C35r) to the CHARMM ether force field is shown to reproduce experimentally observed conformational populations of dimethoxyethane. Molecular dynamics simulations of 9, 18, 27, and 36-mers of polyethylene oxide (PEO) and 27-mers of polyethylene glycol (PEG) in water based on C35r yield a persistence length λ = 3.7 Å, in quantitative agreement with experimentally obtained values of 3.7 Å for PEO and 3.8 Å for PEG; agreement with experimental values for hydrodynamic radii of comparably sized PEG is also excellent. The exponent υ relating the radius of gyration and molecular weight of PEO from the simulations equals 0.515 ± 0.023, consistent with experimental observations that low molecular weight PEG behaves as an ideal chain. The shape anisotropy of hydrated PEO is 2.59:1.44:1.00. The dimension of the middle length for each of the polymers nearly equals the hydrodynamic radius R_h obtained from diffusion measurements in solution. This explains the correspondence of R_h and R_p, the pore radius of membrane channels: a polymer such as PEG diffuses with its long axis parallel to the membrane channel, and passes through the channel without substantial distortion.     

Partitioning of energy and degradability of browse plants in vitro and the implications of blocking the effects of tannin by the addition of polyethylene glycol

The gas production in vitro method was used to evaluate the degradability and gas production of browse plants in the absence or presence of polyethylene glycol 8000 (PEG). Substrates (leguminous and browse plants; 500 mg) were incubated for 24 h and the accumulated gas produced recorded. The incubation contents of the syringes were transferred into nylon bags and the undegraded residues weighed after washing and drying to constant weight (syringe-nylon bag (SNB) method). Substrates were also incubated in the rumen in nylon bags for 24 h to determine in sacco degradability. Gas production ranged between 10.3 and 64.4 ml whereas dry matter degradation ranges between 27.3 and 70.9%. Addition of PEG, which minimised the inhibitory effects of tannin on microbial fermentation resulted in an increase in both gas production and degradability in vitro, which ranged from 25.7 to 64.2 ml and 34.2 to 75.0%, respectively. Correlation analysis of the DM degradability estimated by the SNB method and in sacco method was greater in the presence of PEG (y=0.71x+14.9; r²=0.92) compared with absence of PEG (y=0.59x+15.0; r²=0.72). Partitioning factor (PF) of substrate to gas, which was expressed as mg DM degraded/ml gas, reflects the variation in microbial biomass yield. The PF figures, which varied from 4.94–11.05 to PF_+PEG values of 4.74–6.84 upon the addition of PEG, indicate the inhibitory effects of tannins on gas production. This suggests the presence of tannin has a potentially beneficial effect to protein nutrition of the host animal by altering partitioning of nutrients towards higher microbial yield rather than short chain fatty acids. PF values of browse plants determined both in the absence and presence of PEG may indicate the relative importance of tannins in different plant species on substrate degradability and partitioning of nutrients.     

Polymeric micelles of PEG-PE as carriers of all-trans retinoic acid for stability improvement

The topical application of all-trans retinoic acid (ATRA) is an effective treatment for several skin disorders, including photo-aging. Unfortunately, ATRA is susceptible to light, heat, and oxidizing agents. Thus, this study aimed to investigate the ability of polymeric micelles prepared from polyethylene glycol conjugated phosphatidylethanolamine (PEG-PE) to stabilize ATRA under various storage conditions. ATRA entrapped in polymeric micelles with various PEG and PE structures was prepared. The critical micelle concentrations were 97–243 μM, depending on the structures of the PEG and PE molecules. All of the micelles had particle diameters of 6–20 nm and neutral charges. The highest entrapment efficiency (82.7%) of the tested micelles was exhibited by ATRA in PEG with a molecular weight of 750 Da conjugated to dipalmitoyl phosphatidylethanolamine (PEG₇₅₀-DPPE) micelles. The PEG₇₅₀-DPPE micelle could significantly retard ATRA oxidation compared to ATRA in 75% methanol/HBS solution. Up to 87% of ATRA remained in the PEG₇₅₀-DPPE micelle solution after storage in ambient air for 28 days. This result suggests that PEG₇₅₀-DPPE micelle can improve ATRA stability. Therefore, ATRA in PEG₇₅₀-DPPE micelle is an interesting alternative structure for the development of cosmeceutical formulations.     

Rapid characterization of protein molecular weights and hydrodynamic structures by quasielastic laser-light scattering

Two methods for the characterization of protein molecular weights from their diffusion coefficients are discussed. These measurements can be made quickly and reliably at low concentrations using quasielastic light-scattering techniques. First, an empirical calibration of the diffusion coefficient at infinite dilution of denatured random coils against molecular weight is reported. The second method combines the measurement of D₀ with the intrinsic viscosity [η]. This D₀–[η] relationship proves to be very insensitive to polymers structure or solvent type. The data indicate that the ratio of the hydrodynamic radius measured by viscosity to the hydrodynamic radius measured by diffusion is about 15% smaller than that predicted by theoretical models. The nature of the molecular-weight average obtained for polydisperse systems is defined for a Schulz distribution. These hydrodynamic methods have also been used to demonstrate the presence of chain branching in the glycoprotein ovomucoid. In addition, a method is proposed by which the effective segment length and an excluded volume parameter for random coils may be evaluated for diffusion measurements.     

Molecular weight estimation using sodium dodecyl sulfate-pore gradient electrophoresis

Pore gradient electrophoresis (PGE) in the presence of sodium dodecyl sulfate (SDS) provides a means for high resolution fractionation of multicomponent protein systems and permits estimation of molecular weights for macromolecules ranging from 10³ to 10⁶. We have evaluated the performance of several methods used to construct calibration curves for estimation of molecular weights using SDS-PGE. A linear relationship between the logarithm of molecular weight, log (M_r), and the logarithm of the relative mobility, log (R_l), can be obtained for a 30-fold range of molecular weights. However, this range of linearity depends on the choice of the concentration gradient, the degree of crosslinking of the gel, and on the nature of the underlying relationship between the retardation coefficient, K_R, and the molecular weight. An empirical relationship, first introduced by Lambin et al. (1976, Anal. Biochem.74, 567) between log (M_r) and the logarithm of the gel concentration at the position reached by the protein, log (%T), provides better linearity over a wider molecular weight range than does the use of log (R_l). We have compared these relatienships by experimental analysis of 10 standard proteins and by a theoretical analysis of an idealized model system. A computer program has been developed which provides appropriate statistical estimation of the molecular weight for an unknown protein, together with its standard error and 95% confidence limits. A new method has also been developed for analysis of nonlinear calibration curves in terms of molecular weight versus distance migrated, based on a theoretically justifiable, physical-chemical model. This model implies that either the relationship between log (M_r) and log (R_l) or the one between log (M_r) and log (%T) will become nonlinear as the range of molecular weight is extended. We suggest that the use of a nonlinear least-squares curve-fitting procedure provides an optimal method for molecular weight estimation when sufficient data are available. Based on these findings, a general strategy is presented for estimation of molecular weights by polyacrylamide gel electrophoresis.     

Predicting translational diffusion of evolutionary conserved RNA structures by the nucleotide number

Ribonucleic acids are highly conserved essential parts of cellular life. RNA function is determined to a large extent by its hydrodynamic behaviour. The presented study proposes a strategy to predict the hydrodynamic behaviour of RNA single strands on the basis of the polymer size. By atom-level shell-modelling of high-resolution structures, hydrodynamic radius and diffusion coefficient of evolutionary conserved RNA single strands (ssRNA) were calculated. The diffusion coefficients D of 17–174 nucleotides (nt) containing ssRNA depended on the number of nucleotides N with D = 4.56 × 10⁻¹⁰ N^−0.39 m² s⁻¹. The hydrodynamic radius R_H depended on N with R_H = 5.00 × 10⁻¹⁰ N^0.38 m. An average ratio of the radius of gyration and the hydrodynamic radius of 0.98 ± 0.08 was calculated in solution. The empirical law was tested by in solution measured hydrodynamic radii and radii of gyration and was found to be highly consistent with experimental data of evolutionary conserved ssRNA. Furthermore, the hydrodynamic behaviour of several evolutionary unevolved ribonucleic acids could be predicted. Based on atom-level shell-modelling of high-resolution structures and experimental hydrodynamic data, empirical models are proposed, which enable to predict the translational diffusion coefficient and molecular size of short RNA single strands solely on the basis of the polymer size.     

Fractionation,characterization and antioxidant activity of exopolysaccharides from fermentation broth of a Cordyceps sinensis fungus

Exopolysaccharide (EPS) fractions P_1/5, P_2/5, P₁, P₂ and P₅ were isolated from the fermentation medium of a medicinal fungus Cordyceps sinensis by gradient precipitation with ethanol at 1/5, 2/5, 1, 2, and 5 volume ratios to the liquid medium. P_1/5 and P_2/5 were mainly composed of polysaccharides with negligible protein content and a large molecular or particle size (intrinsic viscosity [η] 2025 mL/g; hydrodynamic radius R_h 905 nm). The fraction attained at a higher ethanol volume ratio had a much higher protein and lower carbohydrate content, and a smaller molecular size. In particular, P₅ was composed of mainly protein with an average molecular weight 16 kDa, [η] 4.3 mL/g and R_h 23.5 nm. The antioxidant activities of EPS fractions showed a significant dependence on the protein content, being negligible of P_1/5 and P_2/5, low to moderate of P₁ and P₂, and very strong of P₅. Gradient ethanol precipitation was proven a simple and workable method for initial fractionation of polysaccharides, proteins and their complexes with different molecular sizes and for further identification of the bioactive components.     

Stages of bacteriophage lambda head morphogenesis: physical analysis of particles in solution

Intermediates in the morphogenesis of bacteriophage lambda are characterized in solution by classical light-scattering, using a modified version of the Zimm plot procedure, by quasi-elastic light-scattering and analytical ultracentrifugation. Partial specific volumes are determined simultaneously with molecular weights by a variant of the conventional combination of sedimentation and diffusion constants. Our measurements were performed within a short time and allowed the characterisation of metastable intermediates.Comparison of hydration of DNA-containing and empty heads shows that dehydration plays a minor role in the stabilisation of the DNA within the heads. The molecular weight of the scaffolding protein is 4 × 10⁶, about twice the value estimated so far. Enlargement of preheads (21% and 13% increase in dry and hydrodynamic radius, respectively) leaves the molecular weight unchanged, whereas the volume of hydration water increases from 70% to 90% of the total hydrodynamic volume. Addition of protein pD to the enlarged preheads leads to a further increase in the radius, indicating that pD is attached to the outside of the protein shell.In order to determine simultaneously the molecular weight and the partial specific volume of large and sometimes labile structures, such as a virus, the conventional sedimentation-diffusion method is modified by measuring sedimentation and diffusion coefficients in buffers containing different amounts of ²H₂O. If diffusion coefficients are determined by quasi-elastic light-scattering, experiments can be performed in a few hours. In addition, the method allows a check on the sample for changes in the frictional coefficient due, for instance, to DNA abortively ejected from a virus preparation. This method is described in the Appendix.     

Physicochemical characterization of the staphylolytic LysK enzyme in complexes with polycationic polymers as a potent antimicrobial

Staphylococcus aureus causes many serious visceral, skin, and respiratory diseases. About 90% of its clinical strains are multi-drug resistant, but the use of bacteriophage lytic enzymes offers a viable alternative to antibiotic therapy. LysK, the phage K endolysin, can lyse S. aureus when purified and exposed externally. It has been investigated in its complexes with polycationic polymers (poly-l-lysines (PLLs) of molecular weights 2.5, 9.6, and 55.2 kDa and their block copolymers with polyethylene glycol PLL₁₀–PEG₁₁₄, PLL₃₀–PEG₁₁₄, and PLL₃₀–PEG₂₃) as a basis for creating active and stable antimicrobial. Complexing with polycationic PLLs produces a stabilizing effect on LysK due to structure ordering in its molecules and break-down of aggregates as a result of electrostatic interaction. The stability of LysK in the presence of PLL–PEG block copolymers improves by both electrostatic and hydrophobic mechanisms. Complexes of LysK with 2.5, 9.6, 55.2 kDa poly-l-lysines and PLL₃₀–PEG₁₁₄ have demonstrated sufficient stability at the temperatures of physiological activity (37 °C) and storage (4 °C and 22 °C).     

Role of Protein Stabilizers on the Conformation of the Unfolded State of Cytochrome c and Its Early Folding Kinetics: INVESTIGATION AT SINGLE MOLECULAR RESOLUTION*

An insight into the conformation and dynamics of unfolded and early intermediate states of a protein is essential to understand the mechanism of its aggregation and to design potent inhibitor molecules. Fluorescence correlation spectroscopy has been used to study the effects of several model protein stabilizers on the conformation of the unfolded state and early folding dynamics of tetramethyl rhodamine-labeled cytochrome c from Saccharomyces cerevisiae at single molecular resolution. Special attention has been given to arginine, which is a widely used stabilizer for improving refolding yield of different proteins. The value of the hydrodynamic radius (r_H) obtained by analyzing the intensity fluctuations of the diffusing molecules has been found to increase in a two-state manner as the protein is unfolded by urea. The results further show that the presence of arginine and other protein stabilizers favors a relatively structured conformation of the unfolded states (r_H of 29 Å) over an extended one (r_H of 40 Å), which forms in their absence. Also, the time constant of a kinetic component (τ_R) of about 30 μs has been observed by analyzing the correlation functions, which represents formation of a collapsed state. This time constant varies with urea concentration representing an inverted Chevron plot that shows a roll-over and behavior in the absence of arginine. To the best of our knowledge, this is one of the first applications of fluorescence correlation spectroscopy to study direct folding kinetics of a protein.     

Application of aqueous biphasic systems as strategy to purify tannase from Aspergillus tamarii URM 7115

The aims of the current study are to assess the influence of polyethylene glycol (PEG) concentration, molar mass, pH, and citrate concentrations on aqueous biphasic systems based on 2⁴ factorial designs, as well as to check their capacity to purify tannase secreted by Aspergillus tamarii URM 7115. Tannase was produced through submerged fermentation at 26°C for 67?h in Czapeck-Dox modified broth and added with yeast extract and tannic acid. The factorial design was followed to assess the influence of PEG molar mass (M_PEG 600; 4,000 and 8,000?g/?mol), and PEG (C_PEG 20.0; 22.0 and 24.0% w/w) and citrate concentrations (C_CIT 15.0, 17.5, and 20.0%, w/w), as well as of pH (6.0, 7.0, and 8.0) on the response variables; moreover, partition coefficient (K), yield (Y), and purification factor (PF) were analyzed. The most suitable parameters to purify tannase secreted by A. tamarii URM 7115 through a biphasic system were 600 (g/mol) M_PEG, 24% (w/w) C_PEG, 15% (w/w) C_CIT at pH 6.0 and they resulted in 6.33 enzyme partition, 131.25% yield, 19.80 purification factor and 195.08 selectivity. Tannase secreted by A. tamarii URM 7115 purified through aqueous biphasic systems composed of PEG/citrate can be used for industrial purposes, since it presents suitable purification factor and yield.     

Polyethylene glycol compared with ytterbium oxide as a total faecal output marker to predict organic matter intake of dairy ewes fed indoors or at pasture

Several external markers can be used for estimating total faecal output in view of assessing ruminant intake at pasture. Among them, ytterbium (Yb) has been used for many years in various conditions. Polyethylene glycol (PEG) is a promising external marker because it can be rapidly determined using near-infrared spectroscopy (NIRS). The study consisted of 24 adult lactating dairy ewes over three periods (P1, P2 and P3), fed with three different diets: P1, total mixed ration (TMR); P2, Italian ryegrass (IRG); and P3, pasture. After an adaptation period, the ewes were administered a daily dose of ytterbium oxide (0.35 g/day) and PEG (20 g/day) for 2 weeks. During the last week, the daily organic matter intake (OMI_OBS) was measured. Faecal samples were collected at milking time (0800 and 1600 h) to determine marker content, using only samples collected in the morning (PEG_m) or by averaging samples (Yb, PEG_ma). Faecal marker content made it possible to assess total faecal output, either using the two recovery rates for PEG (0.98 or 0.87) or not. The OMI_OBS was assessed on the basis of total faeces estimated with Yb (OMI_Yb) or PEG (OMI_PEG), and the digestibility was calculated on the basis of feed analysis. With total TMR (P1), the OMI_PEG, corrected with recovery rate (OMI_PEGm98) or not corrected (OMI_PEGm) was 2.40 kg/day and 2.50 kg/day, respectively, and was not different (P>0.05) from OMI_OBS (2.51 kg/day), whereas OMI_Yb was lower (2.14 kg/day) (P<0.001). With IRG (P2), OMI_PEGm98 (1.67 kg/day), OMI_PEGm87 (1.51 kg/day) and OMI_Yb (1.59 kg/day) were not different (P>0.05) from OMI_OBS (1.57 kg/day). With pasture (P3), the OMI_PEGm (1.54 kg/day) and OMI_PEGm98 (1.48 kg/day) were not different (P>0.05) from the OMI assessed from the biomass measurement (1.52 kg/day). The OMI_Yb (1.36 kg/day) was lower (P<0.05) but not different from OMI_PEGm98 and OMI_PEGm87. Spearman’s rank correlation between OMI_OBS and other OMIs (predicted with Yb or PEG P1 and P2) showed that it is possible to rank animals using PEG when there is a sufficiently wide range of OMI_OBS (1.65 to 2.8 kg/day in P1) but not within a narrower range (1.47 to 1.72 kg/day in P2). In conclusion, the present study confirms that PEG is a valuable external faecal marker, easy to prepare (solution), administer and determine (NIRS). It can be used to assess intake with numerous animals at pasture, but only for groups, and not to quantitatively estimate individual OMI.     

Partitioning studies of α-lactalbumin in environmental friendly poly (ethylene glycol)—citrate salt aqueous two phase systems

Aqueous two-phase systems (ATPS) formed by polymer and salt have been utilized to enrich the desired biomolecule into one of the phase with higher yield and purity. The eco-friendly, biodegradable poly ethylene glycol (PEG) and different citrate salts were chosen as ATPS phase components to investigate the partitioning behavior of α-lactalbumin (α-La). System factors and process parameters such as type and concentration of salt, molecular weight and concentration of PEG, pH, temperature and the effect of additives were studied and the results are discussed in detail. PEG 1000–tri-potassium citrate system yields high partition coefficient of 20 with a better yield of 98 % in the top phase. The addition of NaCl as an additive and acidic pH lowers the yield of α-La in the top phase. Influence of phase volume ratio (V _r) on partitioning was studied and found that the partition coefficient remains almost constant along the tie line. High yield was achieved at a V _r of 3.5 at the tie line length of 50.63 (%, w/w).     

Steric exclusion is the principal source of the preferential hydration of proteins in the presence of polyethylene glycols.

The preferential interactions of bovine serum albumin, lysozyme, chymotrypsinogen, ribonuclease A, and beta-lactoglobulin with polyethylene glycols (PEGs) of molecular weight 200-6,000 have been measured by dialysis equilibrium coupled with high precision densimetry. All the proteins were found to be preferentially hydrated in all the PEGs, and the magnitude of the preferential hydration increased with increasing PEG size for each protein. The change in the chemical potentials of the proteins with the addition of the PEGs had highly positive values, indicating a strong thermodynamic destabilization of the system by the PEGs. A viscosity study of the PEGs showed them to be randomly coiled polymers, as their radii of gyration were related to the molecular weight by Rg = aM0.55. The thickness of the effective shell impenetrable to PEG around protein molecules, calculated from the preferential hydration, was found to vary with PEG molecular weight in similar fashion as the PEG radius of gyration, supporting the proposal (Arakawa, T. & Timasheff, S.N., 1985a, Biochemistry 24, 6756-6762) that the preferential exclusion of PEGs from proteins is due principally to the steric exclusion of PEG from the protein domain, although favorable interactions with protein surface residues, in particular nonpolar ones, may compete with the exclusion. These thermodynamically unfavorable preferential exclusion interactions lead to the action of PEGs as precipitants, although they may destabilize protein structure at higher temperatures.     

Capillary electrophoretic separation of high-molecular-weight poly(ethylene glycol)-modified proteins

This study was designed to demonstrate the utility of capillary electrophoresis (CE) for separating high-molecular-weight poly(ethylene glycol) (PEG)-conjugated proteins. As a CE method, sodium dodecyl sulfate-capillary gel electrophoresis (SDS-CGE) was applied to analyze interferon alpha (IFN) modified with branched and trimer-structured PEG molecules. Five mono-PEG-IFN conjugates prepared with two branched PEGs (MW 20 and 40 kDa) and three trimer-structured PEGs (MW 23.5, 43.5, and 47 kDa) were purified by cation-exchange chromatography and their masses were identified by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. The SDS-CGE method showed high separation capacity by differentiating PEG-IFN conjugates with small differences in molecular size, such as PEG_40K-, PEG_43.5K-, and PEG_47K-IFNs, and it was useful for checking the purity of each mono-PEG-IFN. This study shows that SDS-CGE can well be utilized in the development and quality control of PEGylated proteins prepared with various types of PEG.     

Chitosan cross-linked with poly(ethylene glycol)dialdehyde via reductive amination as effective controlled release carriers for oral protein drug delivery

The covalently cross-linked chitosan-poly(ethylene glycol)₁₅₄₀ derivatives have been developed as a controlled release system with potential for the delivery of protein drug. The swelling characteristics of the hydrogels based on these derivatives as the function of different PEG content and the release profiles of a model protein (bovine serum albumin, BSA) from the hydrogels were evaluated in simulated gastric fluid with or without enzyme in order to simulate the gastrointestinal tract conditions. The derivatives cross-linked with difunctional PEG₁₅₄₀-dialdehyde via reductive amination can swell in alkaline pH and remain insoluble in acidic medium. The cumulative release amount of BSA was relatively low in the initial 2 h and increased significantly at pH 7.4 with intestinal lysozyme for additional 12 h. The results proved that the release-and-hold behavior of the cross-linked CS–PEG₁₅₄₀H-CS hydrogel provided a swell and intestinal enzyme controlled release carrier system, which is suitable for oral protein drug delivery.     

Polymer-cushioned lipid bilayers in porous alumina

Using small-angle neutron scattering (SANS) and cyclic voltammetry (CV), we show that model biological membranes can be deposited on a polymer cushion confined in highly regular porous alumina. The thicknesses of the dilute polymer cushion chemically bound to the alumina and of the supported bilayer are obtained for two polyethylene glycol cushions (PEG₅₀₀₀ and PEG₂₀₀₀₀) and for a cushion made of chains bearing a lipid anchor at their free end (DSPE-PEG₃₄₀₀). The bilayers are studied well below and well above the chain melting temperature of the lipid mixture (DMPC/DMPE: 80/20), using a coenzyme (Ubiquinone, UQ₁₀) as a redox probe for the voltammetry experiments. Analysis of the SANS form factor of the bilayers shows that the bilayer thickness can be extracted in this particular geometry. Using PEG chains grafted at a low surface density (D<2R_g), the thickness of the complete molecular construction is obtained by CV, which shows (after subtracting the bilayer thickness) that the polymer cushion thickness can be varied from 50 to 150 Å. The values obtained with three different chain lengths, are in perfect agreement with the radius derived from the Flory theory.