Electrochemical properties of cytochroms P450 using nanostructured electrodes: direct electron transfer and electro catalysis

The present study demonstrates direct electron transfer between cytochromes P450 2B4 (CYP2B4), P450 1A2 (CYP1A2), sterol 14alpha-demethylase (CYP51b1) on the one hand and screen-printed graphite electrodes, modified with gold nanoparticles and didodecyldimethylammonium bromide (DDAB) on the other. Electro detection of heme proteins was possible when 2-200 pmol P450/electrode were adsorbed on the surface of nanostructured electrochemical interfaces. Electron transfer, direct electrochemical reduction and interaction with P450 substrates (oxygen, benzphetamine, and lanosterol) and with P450 inhibitor (ketoconazole) were analyzed using cyclic voltammetry (CV), square wave voltammetry (SWV) differential pulse voltammetry (DPV), and amperometry.     

Nanoelectrochemistry of cytochrome P450s: Direct electron transfer and electrocatalysis

Direct electron transfer has been demonstrated between cytochrome P450 2B4 (CYP2B4), P450 1A2 (CYP1A2), sterol 14α-demethylase (CYP51MT) and screen printed graphite electrodes, modified by gold nanoparticles and didodecyldimethyl ammonium bromide (DDAB). The proposed method for preparation of enzymatic nanostructured electrodes may be used for electrodetection of this hemoprotein provided that 2–200 pmol P450 per electrode has been adsorbed. Electron transfer, direct electrochemical reduction and interaction with P450 substrates (oxygen, benzphetamine, lanosterol) and inhibitor ketoconazole were analyzed using cyclic voltammetry (CV), square wave (SWV) or differential pulse (DPV) voltammetry, and amperometry.     

Determination of several antibiotics using voltamperometry at the interface of nitrobenzene and water

A new electroanalytical method of voltamperometry at the interface of two immiscible electrolyte solutions (ITIES) is based on electrochemical polarization of a liquid/liquid interface. The resulting current voltage characteristics completely resemble those obtained with metallic electrodes. The charge transfer processes are either the direct ion transfer across the ITIES or the transfer facilitated by macrocyclic ionophores. Determination of tetracycline antibiotics is based on the direct transfer of the cationic forms of these substances in acid media. Determination of valinomycin, nonactin and monensin acting as ion carriers is connected with the facilitated alkali metal ion transfer. In general, antibiotic concentrations higher than 0.02-0.05 mmol/l can be determined with this method. Monensin can also be determined in the extracts of Streptomyces cinnamonensis.     

Simultaneous determination of the monoamine neurotransmitters and glucose in rat brain by microdialysis sampling coupled with liquid chromatography-dual electrochemical detector

A new type of chemically modified electrode based ring-disk electrode as the dual electrochemical detector (DECD) for high-performance liquid chromatography (HPLC) to simultaneously determine the monoamine neurotransmitters and glucose is described. The ring electrode was modified with an ion-exchange polymer-overoxidized polypyrrole (OPPy) and the disk electrode was modified with nano Au colloid and glucose oxidase (GOD). The electrochemical behaviors of dopamine (DA) and ascorbic acid (AA) at the OPPy chemically modified electrode (CME) were investigated by differential pulse voltammetry (DPV). It was found that the CME could permeate dopamine cations and repelled the ascorbate anions, which could be used to determine the monoamine neurotransmitters and avoid the interference of AA. The electrochemical behavior of glucose at the Nafion/GOD-Au colloid/GC CME was investigated by amperometry and flow injection analysis (FIA). It was found that the sensitivity of the CME increased apparently in determination of glucose. In order to obtain better separation and current responses of the analytes in HPLC-DECD, several operational parameters have been investigated. Under the optimum conditions, the method showed good stability and reproducibility. The application of this method coupled with microdialysis sampling for in vivo simultaneous determination of monoamine neurotransmitters and glucose in rat brain was satisfactory.     

Electrochemical behaviors of diethylstilbestrol and its application in pharmacokinetics

The electrochemical behaviors of diethylstilbestrol (DES) at a glassy carbon electrode were investigated by cyclic voltammetry, linear sweep voltammetry, and differential pulse voltammetry (DPV). Based on these, a sensitive and selective DPV method was developed for determination of DES. The linear response range of DES is 1.0 x 10(-4)-2.0 x 10(-6) mol/L and the detection limit was 8.0 x 10(-8) mol/L. The developed method has been used for the pharmacokinetics of DES in rabbit blood plasma.     

A novel label-free electrochemical aptasensor based on graphene-polyaniline composite film for dopamine determination

A novel label-free electrochemical aptasensor based on graphene-polyaniline (GR-PANI) nanocomposites film for dopamine (DA) determination was reported. The resulting GR-PANI layer exhibited good current response for DA determination. The good electron transfer activity might be attributed to the effect of GR and PANI. The highly conductive and biocompatible nanostructure of GR-PANI nanocomposites was characterized by scanning electron microscopy (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). To quantify the amount of DA, the peaks of square-wave voltammetry (SWV) were monitored using the redox couple of an [Fe(CN)(6)](4-/3-) probe. The electrochemical aptasensor showed a linear response to DA in the range 0.007-90 nmol/L and a limit of detection of 0.00198 nmol/L (S/N=3). The electrochemical aptasensor was successfully tested on human serum samples.     

Synthesis and bioelectrochemical behavior of aromatic amines

Four aromatic amines 1-amino-4-phenoxybenzene (A₁), 4-(4-aminophenyloxy) biphenyl (A₂), 1-(4-aminophenoxy) naphthalene (A₃) and 2-(4-aminophenoxy) naphthalene (A₄) were synthesized and characterized by elemental, spectroscopic (FTIR, NMR), mass spectrometric and single crystal X-ray diffraction methods. The compounds crystallized in monoclinic crystal system with space group P2₁. Intermolecular hydrogen bonds were observed between the amine group and amine/ether acceptors of neighboring molecules. Electrochemical investigations were done using cyclic voltammetry (CV), square wave voltammetry (SWV) and differential pulse voltammetry (DPV). CV studies showed that oxidation of aromatic amines takes place at about 0.9 V (vs. Ag/AgCl) and the electron transfer (ET) process has irreversible nature. After first scan reactive intermediate were generated electrochemically and some other cathodic and anodic peaks also appeared in the succeeding scans. DPV study revealed that ET process is accompanied by one electron. DNA binding study of aromatic amines was performed by CV and UV–visible spectroscopy. These investigations revealed groove binding mode of interaction of aromatic amines with DNA.     

A highly sensitive nanostructure-based electrochemical sensor for electrocatalytic determination of norepinephrine in the presence of acetaminophen and tryptophan

A new electrochemical sensor for the determination of norepinephrine (NE), acetaminophen (AC) and tryptophan (Trp) is described. The sensor is based on carbon paste electrode (CPE) modified with 3,4-dihydroxybenzaldehyde-2,4-dinitrophenylhydrazone (DDP) and takes the advantages of carbon nanotubes (CNTs), which makes the modified electrode highly sensitive for the electrochemical detection of these compounds. Cyclic voltammetry (CV) at various scan rates was used to investigate the redox properties of the modified electrode. The apparent charge transfer rate constant, k(s), and transfer coefficient, α, for electron transfer between DDP and CNT paste electrode were calculated. The mediated oxidation of NE at the modified electrode was investigated by CV and the values of k, α and diffusion coefficient (D) were calculated. Under the optimum pH of 7.0, the oxidation of NE occurs at a potential about 215 mV less positive than that of the unmodified CPE. Differential pulse voltammetry (DPV) of NE at the modified electrode exhibited two linear dynamic ranges with a detection limit (3σ) of 77±2 nM. DPV was used for simultaneous determination of NE, AC and Trp at the modified electrode, and quantitation of NE in some real samples by the standard addition method.     

Amperometric biosensor based on tyrosinase-conjugated polysaccharide hybrid film: selective determination of nanomolar neurotransmitters metabolite of 3,4-dihydroxyphenylacetic acid (DOPAC) in biological fluid

The amperometric detection of neurotransmitters metabolite of 3,4-dihydroxyphenylacetic acid (DOPAC) was achieved at a tyrosinase-chitosan composite film-modified glassy carbon (GC) electrode. The optimal conditions for the preparation of the biosensor were established. This bio-composite film was characterized by scanning electron microscopy (SEM) and Fourier transformed infrared (FT-IR) spectra, suggesting that chitosan covalently connected to chitosan chains. Electrochemical characterization of the bio-hybrid membrane-covered electrodes were also performed in 0.05 M phosphate buffer solution (pH 6.52) containing neurotransmitters or their derivatives by using cyclic voltammetry (CV), linear sweep voltammetry (LSV), square wave voltammetry (SWV) and amperometry. This simply-prepared protein-polysaccharide hybrid film provides a microenvironment friendly for enzyme loading. The sensor was operated at -0.15 V with a short response time. The current linearly increased with the increasing concentration of DOPAC over the concentration of 6 nM-0.2 mM. The lower detection limit for DOPAC is 3 nM (S/N=3). The sensitivity of the sensor is 40 microA mM(-1). A physiological level of neurotransmitters and their derivatives including dopamine, l-dopa, adrenaline, noradrenaline and homovanillic acid as well as ascorbic acid, uric acid and acetaminophen do not affect the determination of DOPAC.     

In vivo electrochemistry--principles and applications

Differential pulse voltammetry (DPV) with electrically pretreated carbon fibre microelectrodes has been used to monitor dopamine (DA) and serotonin (5HT) metabolism in specific regions of the rat brain in vivo. Using this technique we have located the 5HT receptor subtype responsible for controlling 5HT release and metabolism in the suprachiasmatic nucleus. The autoreceptor involved in the control of DA metabolism has also been studied and the effects of chronic neuroleptic administration on their sensitivity determined.     

Development of urinary albumin immunosensor based on colloidal AuNP and PVA

The development of immunosensors with high sensitivity and specificity in detecting the pathogenic or physiologically relevant molecules in the body, offers a powerful opportunity in early diagnosis and treatment of diseases. In this study, we developed a new competitive immunosensor with employing antibody (Ab) labeled AuNP (Ab-AuNP) and PVA modified screen-printed carbon electrode (SPCE) surface to detect the urine albumin. Field emission scanning electron microscopy (FE-SEM) of modified electrode showed a suitable and stable attachment between HSA antigen- mAb and AuNP. Cyclic voltammetric (CV) method demonstrated that modification process was well performed. Electrochemical measurements including differential pulse voltammetry (DPV) and square wave voltammetry (SWV) were employed for quantitative antigen detection. The electrochemical measurements performed with other proteins mixed with samples demonstrated a high specificity and selectivity for this biosensor in detecting the HSA. In optimal conditions, the immunosensor could detect HSA in a high linear range (from 2.5 to 200 μg/mL) with a low detection limit of 25 ng/mL. This new strategy could be improved and applied to detect the other antigen.     

Voltammetric investigation of DNA damage induced by nitrofurazone and short-lived nitro-radicals with the use of an electrochemical DNA biosensor

Electrochemical behavior of nitrofurazone (NFZ) was investigated with the use of cyclic voltammetry (CV) and differential pulse voltammetry (DPV) methods. The pH-dependence of NFZ was studied at a glassy carbon electrode (GCE) in ethanol/Britton-Robinson buffer (30:70), and short-lived nitro-radicals were generated by the reduction of NFZ at high pHs (>7.0). In the presence of DNA, the DPV peak current of NFZ decreased and the peak potential shifted negatively, which indicated that there was an electrostatic interaction between NFZ and DNA. An electrochemical dsDNA/GCE biosensor was prepared to study the DNA damage produced in the presence NFZ; this process was followed with the use of the Co(phen)(3)(2+) electroactive probe. Also, the oxidation peaks of guanosine (750mV) and adenosine (980mV) indicated that DNA damage was related directly to the nitro-radicals. Experiments demonstrated that DNA damage occurred via two different steps while NFZ was metabolized and nitro-radicals were produced. Novel work with AFM on the NFZ/DNA interaction supported the suggestion that in vivo, the nitro-radicals were more cytotoxic than the NFZ molecules. A linear DPV calibration plot was obtained for NFZ analysis at a modified dsDNA/GCE (concentration range: 2.50×10(-6)-3.75×10(-5)molL(-1); limit of detection: 8.0×10(-7)molL(-1)), and NFZ was determined successfully in pharmaceutical samples.     

The use of cyclic voltammetry for the evaluation of antioxidant capacity

Low-molecular weight antioxidants (LMWAs) play a major role in protecting biological systems against reactive oxygen-derived species and reflect the antioxidant capacity of the system. Cyclic voltammetry (CV), shown to be convenient methodology, has been validated for quantitation of the LMWA capacity of blood plasma, tissue homogenates, and plant extracts. Analysis of the CV tracing yields the values of (i) the biological oxidation potential, E and E(1/2), which relate to the nature of the specific molecule(s); (ii) the intensity (Ia) of the anodic current; and (iii) the area of the anodic wave (S). Both Ia and S relate to the concentration of the molecule(s). LMWA components of human plasma and animal tissues were identified and further validated by reconstruction of the CV tracing and by high-performance liquid chromatography-electrochemical detection. To reflect the oxidative stress status, the use of an additional parameter, R, has been proposed. R represents the level (%) of oxidized ascorbate (compared with total ascorbate) and is measured by high-performance liquid chromatography-electrochemical detection. All these parameters were monitored in healthy human subjects as well as in chronic (diabetes mellitus) and acute care patients (subjected to total body irradiation before bone marrow transplantation). The electroanalytical methodologies presented here could be widely employed for rapid evaluation of the status of subjects (in health and disease) for monitoring of their response to treatment and/or nutritional supplementation as well as for screening of specific populations.     

Liquid chromatography with amperometric detection using functionalized multi-wall carbon nanotube modified electrode for the determination of monoamine neurotransmitters and their metabolites

The fabrication and application of a novel electrochemical detection (ED) method with the functionalized multi-wall carbon nanotubes (MWNTs) chemically modified electrode (CME) for liquid chromatography (LC) were described. The electrochemical behaviors of dopamine (DA) and other monoamine neurotransmitters at the CME were investigated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The results indicated that the CME exhibited efficient electrocatalytic effects on the current responses of monoamine neurotransmitters and their metabolites with high sensitivity, high stability and long-life activity. In LC-ED, DA, norepinephrine (NE), 3-methoxy-4-hydroxyphenylglycol (MHPG), 3,4-dihydroxyphenylacetic acid (DOPAC), 5-hydroxytryptamine (5-HT), 5-hydroxyindoleacetic acid (5-HIAA) and homovanillic acid (HVA) had good and stable current responses at the CME. The linear ranges of seven analytes were over four orders of magnitude and the detection limits were 2.5 x 10(-10) mol/l for DA, 2.5 x 10(-10) mol/l for NE, 5.0 x 10(-10) mol/l for MHPG, 3.0 x 10(-10) mol/l for DOPAC, 3.5 x 10(-10) mol/l for 5-HT, 6.0 x 10(-10) mol/l for 5-HIAA, 1.25 x 10(-9) mol/l for HVA. The application of this method coupled with microdialysis sampling for the determination of monoamine neurotransmitters and their metabolites in Parkinsonian patients' cerebrospinal fluid was satisfactory.     

Fabrication of hydrogen peroxide biosensor based on Ni doped SnO2 nanoparticles

Ni doped SnO(2) nanoparticles (0-5 wt%) have been prepared by a simple microwave irradiation (2.45 GHz) method. Powder X-ray diffraction (XRD) and transmission electron microscopy (TEM) studies confirmed the formation of rutile structure with space group (P(42)/mnm) and nanocrystalline nature of the products with spherical morphology. Direct electrochemistry of horseradish peroxidase (HRP)/nano-SnO(2) composite has been studied. The immobilized enzyme retained its bioactivity, exhibited a surface confined, reversible one-proton and one-electron transfer reaction, and had good stability, activity and a fast heterogeneous electron transfer rate. A significant enzyme loading (3.374×10(-10) mol cm(-2)) has been obtained on nano-Ni doped SnO(2) as compared to the bare glassy carbon (GC) and nano-SnO(2) modified surfaces. This HRP/nano-Ni-SnO(2) film has been used for sensitive detection of H(2)O(2) by differential pulse voltammetry (DPV), which exhibited a wider linearity range from 1.0×10(-7) to 3.0×10(-4)M (R=0.9897) with a detection limit of 43 nM. The apparent Michaelis-Menten constant (K(M)(app)) of HRP on the nano-Ni-SnO(2) was estimated as 0.221 mM. This excellent performance of the fabricated biosensor is attributed to large surface-to-volume ratio and Ni doping into SnO(2) which facilitate the direct electron transfer between the redox enzyme and the surface of electrode.     

An amperometric bilirubin biosensor based on a conductive poly-terthiophene-Mn(II) complex

An amperometric bilirubin biosensor was fabricated by complexing the Mn(II) ion with a conducting polymer and the final biosensor surface was coated with a thin polyethyleneimine (PEI) film containing an enzyme, ascorbate oxidase (AsOx). The complexation between poly-5,2'-5',2'-terthiophene-3-carboxylic acid (PolyTTCA) and Mn(II) through the formation of Mn-O bond was confirmed by XPS. The PolyTTCA-Mn(II) complex was also characterized using cyclic voltammetry. The PolyTTCA-Mn(II)/PEI-AsOx biosensor specifically detect bilirubin through the mediated electron transfer by the Mn(II) ion. To optimize the experimental condition, various experimental parameters such as pH, temperature, and applied potential were examined. A linear calibration plot for bilirubin was obtained between 0.1 microM and 50 microM with the detection limit of 40+/-3.8 nM. Interferences from other biological compounds, especially ascorbate and dopamine were efficiently minimized by coating the biosensor surface with PEI-AsOx. The bilirubin sensor exhibited good stability and fast response time (<5s). The applicability of this bilirubin sensor was tested in a human serum sample.     

An immunosensor for ferritin based on agarose hydrogel

A novel electrochemical immunosensor for determination of ferritin in serum has been proposed. The immunosensor was prepared by immobilizing ferritin antibody (FeAb) on a glassy carbon electrode (GCE) based on agarose hydrogel. The modification procedure of the immunosensor was characterized by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The effects of amount of FeAb, incubation time and temperature on the immunosensor were explored to provide optimum analytical performance. The determination of ferritin was based on the change in DPV response before and after the antibody (Ab)-antigen (Ag) reaction. Tests result indicated that FeAb in the device microenvironment had biological activity. The detection limit for ferritin was 1.5 x 10(-5) g l(-1) and the linear range was 5-50 x 10(-5) g l(-1) with a correlation coefficient of 0.996. The storage stability was acceptable in pH 7.0 phosphate buffer saline (PBS) solution at 4 degrees C for 10 days. The proposed immunosensor provides a new promising method for the clinical immunoassay of ferritin.     

Nanocomposite of functionalized multiwall carbon nanotubes with nafion, nano platinum, and nano gold biosensing film for simultaneous determination of ascorbic acid, epinephrine, and uric acid

A unique bimetallic, nano platinum (Pt) with nano gold (Au) on nafion (NF) incorporated with functionalized multiwall carbon nanotubes (f-MWCNTs) composite film (f-MWCNTs-NF-PtAu) was developed by the potentiostatic method. The composite film exhibits promising efficient catalytic activity towards the oxidation of mixture of biochemical compounds and simultaneous measurement of ascorbate anion, epinephrine and urate anion in aqueous buffer solution (pH 6.75). Both, the cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were used for the measurement of electroanalytical properties of neurotransmitters by means of composite film modified electrodes. Well-separated voltammetric peaks were obtained for ascorbate, epinephrine and urate anions with the peak separations of 0.222 and 0.131V. The composite film can also be produced on gold and transparent semiconductor indium tin oxide electrodes for different kinds of studies such as electrochemical quartz crystal microbalance (EQCM), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The incorporation of Pt and Au onto the f-MWCNTs-NF was revealed by the EQCM technique and the morphology of the film was studied using SEM, AFM and scanning electrochemical microscopy (SECM) techniques. Further, extensive studies were carried out using SECM for obtaining the surface current topographic images of composite film modified electrodes, and these indicated the presence of f-MWCNTs-NF-PtAu composite film on the electrode.     

Simultaneous determination of 5-hydroxyindoleacetic acid and 5-hydroxytryptamine in urine samples from patients with acute appendicitis by liquid chromatography using poly(bromophenol blue) film modified electrode

The fabrication and application of a novel electrochemical detection (ED) system with a poly(bromophenol blue) (PBPB) film chemically modified electrode (CME) for high performance liquid chromatography (HPLC) were described. The electrochemical behaviors of 5-hydroxytryptamine (5-HT) and 5-hydroxyindoleacetic acid (5-HIAA) at this CME were investigated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). It was found that the PBPB CME efficiently exhibited electrocatalytic effect on the current responses of 5-HT and 5-HIAA with relatively high sensitivity, stability and long life of activity. In HPLC-ED, the two analytes had good and stable current responses at the CME and their linear ranges were over four orders of magnitude (R> or =0.9992) with the detection limits being 0.25 nmol L(-1) for 5-HT and 0.50 nmol L(-1) for 5-HIAA. The application of this method for the determination of 5-HT and 5-HIAA in urine samples from patients with acute appendicitis (AA) was satisfactory.     

The simultaneous electrochemical detection of ascorbic acid, dopamine, and uric acid using graphene/size-selected Pt nanocomposites

In this study, a graphene/Pt-modified glassy carbon (GC) electrode was created to simultaneously characterize ascorbic acid (AA), dopamine (DA), and uric acid (UA) levels via cyclic voltammetry (CV) and differential pulse voltammetry (DPV). During the preparation of the nanocomposite, size-selected Pt nanoparticles with a mean diameter of 1.7 nm were self-assembled onto the graphene surface. In the simultaneous detection of the three aforementioned analytes using CV, the electrochemical potential differences among the three detected peaks were 185 mV (AA to DA), 144 mV (DA to UA), and 329 mV (AA and UA), respectively. In comparison to the CV results of bare GC and graphene-modified GC electrodes, the large electrochemical potential difference that is achieved via the use of the graphene/Pt nanocomposites is essential to the distinguishing of these three analytes. An optimized adsorption of size-selected Pt colloidal nanoparticles onto the graphene surface results in a graphene/Pt nanocomposite that can provide a good platform for the routine analysis of AA, DA, and UA.