Chip-based protein-protein interaction studied by atomic force microscopy

In this article, a technique for accurate direct measurement of protein‐to‐protein interactions before and after the introduction of a drug candidate is developed using atomic force microscopy (AFM). The method is applied to known immunosuppressant drug candidate Echinacea purpurea derived cynarin. T‐cell/CD28 is on‐chip immobilized and B‐cell/CD80 is immobilized on an AFM tip. The difference in unbinding force between these two proteins before and after the introduction of cynarin is measured. The method is described in detail including determination of the loading rates, maximum probability of bindings, and average unbinding forces. At an AFM loading rate of 1.44 × 10⁴ pN/s, binding events were largely reduced from 61 ± 5% to 47 ± 6% after cynarin introduction. Similarly, maximum probability of bindings reduced from 70% to 35% with a blocking effect of about 35% for a fixed contact time of 0.5 s or greater. Furthermore, average unbinding forces were reduced from 61.4 to 38.9 pN with a blocking effect of ～37% as compared with ～9% by SPR. AFM, which can provide accurate quantitative measures, is shown to be a good method for drug screening. The method could be applied to a wider variety of drug candidates with advances in bio‐chip technology and a more comprehensive AFM database of protein‐to‐protein interactions. Biotechnol. Bioeng. 2012; 109: 2460–2467. © 2012 Wiley Periodicals, Inc.     

High-resolution atomic force microscopy visualization of metalloproteins and their complexes

Background

Metalloproteins myeloperoxidase (MPO), ceruloplasmin (CP) and lactoferrin (LF) play an important role in regulation of inflammation and oxidative stress in vertebrates. It was previously shown that these proteins may work synergetically as antimicrobial and anti-inflammatory agents by forming complexes, such as MPO-CP and LF-CP. However, interaction of metalloprotein molecules with each other has never been characterized at a single-molecule level.

Cellular secretion studied by force microscopy

Using the optical microscope, real adventures in cellular research began in earnest in the latter half of the nineteenth century. With the development of the electron microscope, ultramicroscopy, and improved cell staining techniques, significant advances were made in defining intracellular structures at the nanometer level. The invention of force microscopy, the atomic force microscope (AFM) in the mid 1980s, and the photonic force microscope (PFM) in the mid 1990s, finally provided the opportunity to study live cellular structure-function at the nanometer level. Working with the AFM, dynamic cellular and subcellular events at the molecular level were captured in the mid 1990s, and a new cellular structure 'the porosome' in the plasma membrane of all secretory cells has been defined, where specific docking and fusion of secretory vesicles occur. The molecular mechanism of fusion of the secretory vesicle membrane at the base of the porosome membrane in cells, and the regulated release of intravesicular contents through the porosome opening to the extracellular space, has been determined. These seminal discoveries provide for the first time a molecular mechanism of cell secretion, and the possibility to ameliorate secretory defects in disease states.     

Chitosan nanoparticles as non-viral gene delivery vehicles based on atomic force microscopy study

Chitosan （CS）, a biocompatible and biodegradable material, can act as a non-viral delivery vehicle with low toxicity. In this study, plasmid DNA （pDNA） and siRNA were encapsulated in CS nanoparticles （NPs） to prepare CS-DNA and CS-siRNA NPs using a complex coacervation process. The CS-DNA particle size was within the range of 180-370 nm with a surface charge ranging from 0 to 18 mV at pH 5.5. The stability of pDNA in CS-DNA was investigated by pDNA release study and DNase I protection assay. The release of pDNA from NPs was studied in pH 7.4 phosphatebuffered saline at 37℃ and the CS-DNA NPs could delay the DNA release. Results of DNase I protection assay showed that CS-DNA NPs could protect the encapsulated pDNA from nuclease degradation. In the transfection study, it was found that the transfection efficiency in vitro was dependent on the molecular weight, charge ratio, and DNA concentration of the CS-DNA NP as well as the type of cell transfected. Moreover, the morphology of HeLa cells transfected with CS-siRNA complexes was studied using atomic force microscopy. The results suggest that CS may be more capable than liposome in delivering siRNA to target cells. In summary, our analysis suggests that pDNA and siRNA can be encapsulated in CS NPs without being damaged.     

原子力显微技术在酶学研究中的应用

酶在生物体的生命活动中占有及其重要的地位,机体功能的和谐统一有赖于酶的作用。原子力显微技术(AFM)作为一门新发展起来的技术,为人们认识酶的结构与功能提供了又一新的窗口。AFM能够在生理条件下对生物样品进行三维成像,在分子水平上实时监测生理生化反应。AFM还能够在皮牛顿精度上测定分子间作用力。目前,AFM已用于单分子酶的化学性质及其作用原理的研究。本简述AFM在酶学中的应用情况。     

Structure of human chromosomes studied by atomic force microscopy

In this work human chromosomes have been treated with RNase and pepsin to remove the layer of cellular material that covers the standard preparations on glass slides. This allows characterization of the topography of chromosomes at nanometer scale in air and in physiological solution by atomic force microscopy. Imaging of the dehydrated structure in air indicates radial arrangement of chromatin loops as the last level of DNA packing. However, imaging in liquid reveals a last level of organization consisting of a hierarchy of bands and coils. Additionally force curves between the tip and the chromosome in liquid are consistent with radial chromatin loops. These results and previous electron microscopy studies are analyzed, and a model is proposed for the chromosome structure in which radial loops and helical coils coexist.     

Oligomerization states of Bowman-Birk inhibitor by atomic force microscopy and computational approaches

Several methods have been applied to study protein-protein interaction from structural and thermodynamic point of view. The present study reveals that atomic force microscopy (AFM), molecular modeling, and docking approaches represent alternative methods offering new strategy to investigate structural aspects in oligomerization process of proteinase inhibitors. The topography of the black-eyed pea trypsin/chymotrypsin inhibitor (BTCI) was recorded by AFM and compared with computational rigid-bodies docking approaches. Multimeric states of BTCI identified from AFM analysis showed globular-ellipsoidal shapes. Monomers, dimers, trimers, and hexamers were the most prominent molecular arrays observed in AFM images as evaluated by molecular volume calculations and corroborated by in silico docking and theoretical approaches. We therefore propose that BTCI adopts stable and well-packed self-assembled states in monomer-dimer-trimer-hexamer equilibrium. Although there are no correlation between specificity and packing efficiency among proteinases and proteinase inhibitors, the AFM and docked BTCI analyses suggest that these assemblies may exist in situ to play their potential function in oligomerization process.     

High-speed atomic force microscopy: Imaging and force spectroscopy

Atomic force microscopy (AFM) is the type of scanning probe microscopy that is probably best adapted for imaging biological samples in physiological conditions with submolecular lateral and vertical resolution. In addition, AFM is a method of choice to study the mechanical unfolding of proteins or for cellular force spectroscopy. In spite of 28 years of successful use in biological sciences, AFM is far from enjoying the same popularity as electron and fluorescence microscopy. The advent of high-speed atomic force microscopy (HS-AFM), about 10 years ago, has provided unprecedented insights into the dynamics of membrane proteins and molecular machines from the single-molecule to the cellular level. HS-AFM imaging at nanometer-resolution and sub-second frame rate may open novel research fields depicting dynamic events at the single bio-molecule level. As such, HS-AFM is complementary to other structural and cellular biology techniques, and hopefully will gain acceptance from researchers from various fields. In this review we describe some of the most recent reports of dynamic bio-molecular imaging by HS-AFM, as well as the advent of high-speed force spectroscopy (HS-FS) for single protein unfolding.     

原子力显微镜单分子力谱研究生物分子间相互作用

原子力显微镜单分子力谱是近年来发展起来的能在单分子水平研究生物分子相互作用的新工具。本文综述了单分子力谱的测定原理、方法及其在研究蛋白．蛋白、蛋白-DNA相互作用,蛋白质去折叠和活细胞上配体／受体结合中的应用进展。     

Isothermal titration calorimetry study of the polyelectrolyte complexation of xanthan and chitosan samples of different degree of polymerization

Mixing oppositely charged polyelectrolytes in aqueous solutions leads to the spontaneous formation of polyelectrolyte complexes. Here, we characterize the interaction between xanthan of two different chain lengths, a tri-glucosamine and a chitosan polymer by isothermal titration calorimetry (ITC). Analysis of the experimental thermodynamic data assuming a single set of identical sites indicated both enthalpic and entropic contributions to the overall interaction in the interaction between xanthan and tri-glucosamine. The relative contribution of entropy compared to enthalpy was found to be largest for the shortest chain length of xanthan. Using a chitosan polymer instead of tri-glucosamine gave rise to two different stages in the interaction process. A model where the first stage of the ITC curve represent an initial polyelectrolyte complexation stage followed by aggregation on further titration of chitosan to the xanthan is suggested. Ultrastructure images by applying atomic force microscopy at some selected extents of titration are consistent with the two-stage interpretation of the thermodynamic data.     

Ultrastable atomic force microscopy: Improved force and positional stability

Atomic force microscopy (AFM) is an exciting technique for biophysical studies of single molecules, but its usefulness is limited by instrumental drift. We dramatically reduced positional drift by adding two lasers to track and thereby actively stabilize the tip and the surface. These lasers also enabled label-free optical images that were spatially aligned to the tip position. Finally, sub-pN force stability over 100 s was achieved by removing the gold coating from soft cantilevers. These enhancements to AFM instrumentation can immediately benefit research in biophysics and nanoscience.     

Assessing the flexibility of intermediate filaments by atomic force microscopy

Eukaryotic cells contain three cytoskeletal filament systems that exhibit very distinct assembly properties, supramolecular architectures, dynamic behaviour and mechanical properties. Microtubules and microfilaments are relatively stiff polar structures whose assembly is modulated by the state of hydrolysis of the bound nucleotide. In contrast, intermediate filaments (IFs) are more flexible apolar structures assembled from a approximately 45 nm long coiled-coil dimer as the elementary building block. The differences in flexibility that exist among the three filament systems have been described qualitatively by comparing electron micrographs of negatively stained dehydrated filaments and by directly measuring the persistence length of F-actin filaments (approximately 3-10 microm) and microtubules (approximately 1-8 mm) by various physical methods. However, quantitative data on the persistence length of IFs are still missing. Toward this goal, we have carried out atomic force microscopy (AFM) in physiological buffer to characterise the morphology of individual vimentin IFs adsorbed to different solid supports. In addition, we compared these images with those obtained by transmission electron microscopy (TEM) of negatively stained dehydrated filaments. For each support, we could accurately measure the apparent persistence length of the filaments, yielding values ranging between 0.3 microm and 1 microm. Making simple assumptions concerning the adsorption mechanism, we could estimate the persistence length of an IF in a dilute solution to be approximately 1 microm, indicating that the lower measured values reflect constraints induced by the adsorption process of the filaments on the corresponding support. Based on our knowledge of the structural organisation and mechanical properties of IFs, we reason that the lower persistence length of IFs compared to that of F-actin filaments is caused by the presence of flexible linker regions within the coiled-coil dimer and by postulating the occurrence of axial slipping between dimers within IFs.     

Monitoring biomolecular interactions by time-lapse atomic force microscopy

The atomic force microscope (AFM) is a unique imaging tool that enables the tracking of single macromolecule events in response to physiological effectors and pharmacological stimuli. Direct correlation can therefore be made between structural and functional states of individual biomolecules in an aqueous environment. This review explores how time-lapse AFM has been used to learn more about normal and disease-associated biological processes. Three specific examples have been chosen to illustrate the capabilities of this technique. In the cell, actin polymerizes into filaments, depolymerizes, and undergoes interactions with numerous effector molecules (i.e., severing, capping, depolymerizing, bundling, and cross-linking proteins) in response to many different stimuli. Such events are critical for the function and maintenance of the molecular machinery of muscle contraction and the dynamic organization of the cytoskeleton. One goal is to use time-lapse AFM to examine and manipulate some of these events in vitro, in order to learn more about how these processes occur in the cell. Aberrant protein polymerization into amyloid fibrils occurs in a multitude of diseases, including Alzheimer's and type 2 diabetes. Local amyloid deposits may cause organ dysfunction and cell death; hence, it is of interest to learn how to interfere with fibril formation. One application of time-lapse AFM in this area has been the direct visualization of amyloid fibril growth in vitro. This experimental approach holds promise for the future testing of potential therapeutic drugs, for example, by directly visualizing at which level of fibril assembly (i.e., nucleation, elongation, branching, or lateral association of protofibrils) a given active compound will interfere. Nuclear pore complexes (NPCs) are large supramolecular assemblies embedded in the nuclear envelope. Transport of ions, small molecules, proteins, RNAs, and RNP particles in and out of the nucleus occurs via NPCs. Time-lapse AFM has been used to structurally visualize the response of individual NPC particles to various chemical and physical effectors known to interfere with nucleocytoplasmic transport. Taken together, such time-lapse AFM studies could provide novel insights into the molecular mechanisms of fundamental biological processes under both normal and pathological conditions at the single molecule level.     

Functionalization of amino-modified probes for atomic force microscopy

The probes for atomic force microscopy (AFM) functionalized with bovine serum albumin (BSA) were obtained; they can be used for molecular recognition studies. The procedure of modification and functionalization of the AFM probe included three stages. First, amino probes were obtained by modification in vapors of an amino silane derivative. Then, a covalent bond was formed between the surface amino groups of the probe and a homobifunctional aminoreactive crosslinker. Finally, the probe with a covalently attached crosslinker was functionalized with BSA molecules. The AFM probes were characterized by force measurements at different stages of the modification; the adhesion force and the work of adhesion force were determined. The modification process was confirmed by visualization of BSA and supercoiled pGEMEX DNA molecules immobilized on the standard amino mica and on amino mica modified with a crosslinker.     

Single molecule atomic force microscopy of aerolysin pore complexes reveals unexpected star‐shaped topography

Aerolysin is the paradigmatic member of a large family of toxins that convert from a water‐soluble monomer/dimer into a membrane‐spanning oligomeric pore. While there is x‐ray crystallographic data of its water‐soluble conformation, the most recent structural model of the membrane‐inserted pore is based primarily on data of water‐soluble tetradecamers of mutant protein, together with computational modeling ultimately performed in vacuum. Here we examine this pore model with atomic force microscopy (AFM) of membrane‐associated wild‐type complexes and all‐atom molecular dynamics (MD) simulations in water. In striking contrast to a disc‐shaped cap region predicted by the present model, the AFM images reveal a star‐shaped complex, with a central ring surrounded by seven radial projections. Further, the MD simulations suggest that the locations of the receptor‐binding (D1) domains in the present model are not correct. However, a modified model in which the D1 domains, rather than localized at fixed positions, adopt a wide range of configurations through fluctuations of an intervening linker is compatible with existing data. Thus our work not only demonstrates the importance of directly resolving such complexes in their native environment but also points to a dynamic receptor binding region, which may be critical for toxin assembly on the cell surface. Copyright © 2015 John Wiley & Sons, Ltd.     

原子力显微技术成像在生物医学中的应用

原子力显微技术利用探针尖端与标本之间相互作用的力场对标本进行三维成像。这种成像可在生理条件下进行 ,可进行动态观察和标本容易制备是有别于其它成像技术如电子显微镜成像等的特点。对于细胞和生物大分子 ,能够在生理条件下成像具有重要意义。它意味着人们在认识生命本质的方法学方面 ,又向前迈出了新的一步。本文简要综述对细胞和生物大分子的成像在生物医学方面的应用。     

Quasi-linear viscoelastic properties of costal cartilage using atomic force microscopy

Costal cartilage (CC) is one of the load-bearing tissues of the rib cage. Literature on material characterisation of the CC is limited. Atomic force microscopy (AFM) has been extremely successful in characterising the elastic properties of soft biomaterials such as articular cartilage and hydrogels, which are often the material of choice for cartilage models. But AFM data on CC are absent in the literature. In this study, AFM indentations using spherical beaded tips were performed on human CC to isolate the mechanical properties. A novel method was developed for modelling the relaxation indentation experiments based on Fung's quasi-linear viscoelasticity and a continuous relaxation spectrum. This particular model has been popular for uniaxial compression test data analysis. Using the model, the mean Young's modulus of CC was found to be about 2.17, 4.11 and 5.49 MPa for three specimens. A large variation of modulus was observed over the tissue. Also, the modulus values decreased with distance from the costochondral junction.     

Double minute chromosomes in mouse methotrexate-resistant cells studied by atomic force microscopy

Double minute chromosomes (DMs) are acentric, autonomously replicating extra-chromosomes and frequently mediate gene amplification in tumor and drug resistant cells. Atomic force microscopy (AFM) is a powerful tool in microbiology. We used AFM to explore the ultrastructure of DMs in mouse fibroblasts 3T3R500. DMs in various phases of cell cycle were also studied in order to elucidate the mechanisms of their duplication and separation. Metaphase spread and induced premature condensed chromosomes (PCCs) were observed under the AFM. DMs were detected to be composed of two compact spheres linked by fibers. The fibers of DMs directly connected with metaphase chromosomes were observed. Many single-minutes and few DMs were detected in G1 PCCs, while more DMs were detected in S PCCs than in G1 PCCs. Besides, all of the DMs in G2 PCCs were coupled. Our present results suggested that DMs might divide into single-minutes during or before G1-phase, followed by duplication of the single-minutes in S-phase. Moreover, we introduced a new powerful tool to study DMs and got some ideal results.     

Direct visualization of KirBac3.1 potassium channel gating by atomic force microscopy

KirBac3.1 belongs to a family of transmembrane potassium (K⁺) channels that permit the selective flow of K-ions across biological membranes and thereby regulate cell excitability. They are crucial for a wide range of biological processes and mutations in their genes cause multiple human diseases. Opening and closing (gating) of Kir channels may occur spontaneously but is modulated by numerous intracellular ligands that bind to the channel itself. These include lipids (such as PIP₂), G-proteins, nucleotides (such as ATP) and ions (e.g. H⁺, Mg²⁺, Ca²⁺). We have used high-resolution atomic force microscopy (AFM) to examine KirBac3.1 in two different configurations. AFM imaging of the cytoplasmic surface of KirBac3.1 embedded in a lipid bilayer has allowed visualization of the tetrameric assembly of the ligand-binding domain. In the absence of Mg²⁺, the four subunits appeared as four protrusions surrounding a central depression corresponding to the cytoplasmic pore. They did not display 4-fold symmetry, but formed a dimer-of-dimers with 2-fold symmetry. Upon addition of Mg²⁺, a marked rearrangement of the intracellular ligand-binding domains was observed: the four protrusions condensed into a single protrusion per tetramer, and there was an accompanying increase in protrusion height. The central cavity within the four intracellular domains also disappeared on addition of Mg²⁺, indicating constriction of the cytoplasmic pore. These structural changes are likely transduced to the transmembrane helices, which gate the K⁺ channel. This is the first time AFM has been used as an interactive tool to study K⁺ channels. It has enabled us to directly measure the conformational changes in the protein surface produced by ligand binding.