Staining Paraffin Sections with Protargol 6. Impregnation and Differentiation of Nerve Fibers in Adrenal Glands of Mammals

A series of experiments with protargol staining of nerve fibers in mammalian adrenal glands has yielded the following procedure: Fix-1-2 days in a mixture of formamide (Eastman Kodak Company) 10 cc, chloral hydrate 5 g., and 50% ethyl alcohol 90 cc. Wash, dehydrate and embed in paraffin. Cut sections about 15 and mount on slides. Remove the paraffin and run down to distilled water. Mordant 1-2 days in a 1% aqueous solution of thallous (or lead) nitrate at 56-60°C. Wash thru several changes of distilled water and impregnate in 1% aqueous protargol (Winthrop Chemical Company) at 37-40°C. for 1 to 2 days. Rinse quickly in distilled water and differentiate 7-15 seconds in a 0.1% aqueous solution of oxalic acid. Rinse thru several changes of distilled water for a total time of 0.5 to 1.0 rain. Reduce 3-5 rain, in Bodian's reducer: hydroquinone 1 g., sodium sulfite 5 g., distilled water 100 cc. Wash in running water 3-5 min. and tone 5-10 min. in a 0.2% gold chloride solution. Wash 0.5 min. or more and reduce in a 2% oxalic acid solution to which has been added strong formalin, 1 cc. per 100. (Caution. This last reduction is critical and over-reduction can spoil an otherwise good stain; 15-30 seconds usually suffices, and the sections should show only the beginning of darkening to a purplish or gray color.) Wash, fix in hypo, wash, dehydrate and cover.     

A consistent phosphotungstic acid hematoxylin stain for glial fibers.

After deceration, celloidinization and hydration, oxidize 10 micron paraffin sections for 15 min in a solution containing 0.3 g KMnO4 and 0.1 ml conc. H2SO4 per 100 ml distilled water. Wash in water and reduce in 5% oxalic acid until the sections are colorless. Wash thoroughly in water and place in 4% iron alum solution for two hours. Wash briefly in water and stain for two hours in phosphotungstic acid hematoxylin. Rinse briefly in 95% ethanol and dehydrate in n-butyl alcohol or absolute ethanol for 4 min with two changes, clear and mount. Glial fibers, myofibrils, red blood cells, etc. are stained blue while astrocyte cell bodies, collagen, etc. are stained red. This stain has proven highly consistent in a wide variety of astrocytic derangements. Despite the intensity of this PTAH modification, false positive staining was not observed.     

A Consistent Phosphotungstic Acid Hematoxylin Stain for Glial Fibers

After deceration, celloidinization and hydration, oxidize 10 micron paraffin sections for 15 min in a solution containing 0.3 g KMnO₄, and 0.1 ml conc. H₂SO₂, per 100 ml distilled water. Wash in water and reduce in 5% oxalic acid until the sections are colorless. Wash thoroughly in water and place in 4% iron alum solution for two hours. Wash briefly in water and stain for two hours in phosphotungstic acid hematoxylin. Rinse briefly in 95% ethanol and dehydrate in n-butyl alcohol or absolute ethanol for 4 min with two changes, clear and mount. Glial fibers, myofibrils, red blood cells, etc. are stained blue while astrocyte cell bodies, collagen, etc. are stained red. This stain has proven highly consistent in a wide variety of astrocytic derangements. Despite the intensity of this PTAH modification, false positive staining was not observed.     

Tannic acid-iron alum reactions: stain of choice for macroscopic sections of brain to be embedded in plastic.

As a macroscopic stain for gross brain sections to be embedded in plastic, tannic acid-iron alum is superior to the generally recommended LeMasurier's variation of the Berlin blue technique because of its greater permanency in plastic. However, as originally adopted for use with brain tissue by Mulligan, the intense black staining of gray matter is too dark for plastic embedded specimens. A modification of this method designed to overcome this difficulty is described. Staining procedure: Wash formalin-fixed brain slices overnight in running water. Wash in distilled water, 2 changes, 30 minutes each. Place slices individually in Mulligan's solution at a temperature of 60-65 C for 4 minutes. Rinse in ice water for 10 seconds. Mordant in 0.4% tannic acid in distilled water for 1 minute. Wash in running tap water for 1 minute. Develop in 0.08% ferric ammonium sulfate in distilled water until gray matter is light gray, about 10-15 seconds. Wash in lukewarm running water for 1 hour, then gently hand-rub whitish film from myelinated surfaces. Store briefly in 3% formalin or 25% glycerine if necessary depending on plastic embedding procedure to be followed.     

Tannic Acid-Iron Alum Reaction: Stain of Choice for Macroscopic Sections of Brain to be Embedded in Plastic

As a macroscopic stain for gross brain sections to be embedded in plastic, tannic acid-iron alum is superior to the generally recommended LeMasurier's variation of the Berlin blue technique because of its greater permanency in plastic. However, as originally adopted for use with brain tissue by Mulligan, the intense black staining of gray matter is too dark for plastic embedded specimens. A modification of this method designed to overmme this difficulty is described. Staining procedure: Wash formalin-fixed brain slices overnight in running water. Wash in distilled water, 2 changes, 30 minutes each. Place slices individually in Mulligan's solution at a temperature of 60-65 C for 4 minutes. Rinse in ice water for 10 seconds. Mordant in 0.4% tannic acid in distilled water for 1 minute. Wash in running tap water for 1 minute. Develop in 0.08% ferric ammonium sulfate in distilled water until gray matter is light gray, about 10-15 seconds. Wash in lukewarm running water for 1 hour, then gently hand-rub whitish film from myelinated surfaces. Store briefly in 3% formalin or 25% glycerine if necessary depending on plastic embedding procedure to be followed.     

A Protargol Method for Staining Nerve Fibers in Frozen or Celloidin Sections

Extensive experimentation with protargol staining of neurons in celloidin and frozen sections of organs has resulted in the following technic: Fix tissue in 10% aqueous formalin. Cut celloidin sections IS to 25 μ, frozen sections 25 to 40 μ. Place sections for 24 hours in 50% alcohol to which 1% by volume of NH₄OH has been added. Transfer the sections directly into a 1% aqueous solution of protargol, containing 0.2 to 0.3 g. of electrolytic copper foil which has been coated with a 0.5% solution of celloidin, and allow to stand for 6 to 8 hours at 37° C. Caution: In this and the succeeding step the sections must not be allowed to come in contact with the copper. From aqueous protargol, place the sections for 24 to 48 hours at 37° C. directly into a pyridinated solution of alcoholic protargol (1.0% aqueous solution protargol, 50 ml.; 95% alcohol, 50 ml.; pyridine, 0.5 to 2.0 ml.), containing 0.2 to 0.3 g. of coated copper. Rinse briefly in 50% alcohol and reduce 10 min. in an alkaline hydroquinone reducer (H₃BO₃, 1.4 g.; Na₂SO₃, anhydrous, 2.0 g.; hydroquinone, 0.3 g.; distilled water, 85 cc; acetone, 15 ml.). Wash thoroly in water and tone for 10 min. in 0.2% aqueous gold chloride, acidified with acetic acid. Wash in distilled water and reduce for 1 to 3 min. in 2% aqueous oxalic acid. Quickly rinse in distilled water and treat the sections 3 to 5 min. with 5% aqueous Na₂S₂O₃+5H₂O. Wash in water and stain overnight in Einarson's gallocyanin. Wash thoroly in water and place in 5% aqueous phosphotungstic acid for 30 min. From phosphotungstic acid transfer directly to a dilution (stock solution, 20 ml.; distilled water, 30 ml.) of the following stock staining solution: anilin blue, 0.01 g.; fast green FCF, 0.5 g.; orange G, 2.0 g.; distilled water, 92.0 ml.; glacial acetic acid, 8 ml.) and stain for 1 hour. Differentiate with 70% and 95% alcohol; pass the sections thru butyl alcohol and cedar oil; mount.     

Selective Silver Impregnation of Degenerating Axons In The Central Nervous System

Rat and rabbit brains containing surgical lesions of 5-10 days' duration were fixed in 10% formalin (neutralized with calcium carbonate) for 1 week to 6 months. Frozen sections (15-20 n) were rinsed and then soaked 7 minutes in a 1.7% solution of strong ammonia in distilled water. Subsequent treatment was as follows: rinse; 0.05% aqueous potassium permanganate 5-15 minutes; 0.5% aqueous potassium metabisulfite, 2 changes of 2.5 minutes each; wash thoroughly in 3 changes distilled water; 1.5% aqueous silver nitrate, 0.5-1.0 hr.; 1% citric acid, 5-10 sec.; 2 changes distilled water; 1% sodium thiosulfate, 30 see.; 3 changes distilled water. Each section is then processed separately. Ammoniacal silver solution (450 mg. silver nitrate in 10 ml. distilled water; add 5 ml. ethanol; let cool to room temperature; add 1 ml. strong ammonia water and 0.9 ml. of 2.5% aqueous sodium hydroxide), 0.5-1.0 min. with gentle agitation. Reduction of about 1 minute is accomplished in: distilled water, 45 ml.; ethanol, 5 ml.; 10% formalin, 1.5 ml.; 1% citric acid, 1.5 ml. Rinsing; 1% sodium thiosulfate, 10 sec.; thorough washing followed by dehydration through graded alcohol and 3 changes of xylene or toluene complete the staining process. Normal nerve fibers are slightly stained to unstained, degenerating fibers, black. The treatment in potassium permanganate is critical since too little favors overstaining of normal fibers and too much abolishes staining of degenerating fibers.     

A New Method of Silver Impregnation for Nerve Cells and Fibers

Fragments of tissue, immediately after death, are fixed in Debaisieux's modification of the Duboscq-Brazil picro-aceticformol fluid, and treated as follows: Hydrate by soaking 2-6 hr. in distilled water with 30 drops of cone. NH₄OH per 100 cc. Freeze and cut sections about 25μ in thickness. Bleach sections about 15 min. in ammoniacal water (52 drops cone. NH₄OH per 100 cc. water). Transfer to 20% AgNO₃ solution and heat at 45° C. till light brown. Add cone. NH₄OH drop by drop till the Ag precipitates and then redisolves into an opalescent solution. Pour solution and sections into a little distilled water and transfer sections quickly to formaldehyde solution (3 cc. formalin to 100 cc. water). Dip sections in distilled water and transfer to 1% aqueous gold chloride till deep blue. Place for about 10 minutes in 5% aqueous sodium thiosulfate solution for fixing and clearing. Wash thoroly in tap water, dehydrate and mount. Special directions are given for applying this technic to delicate material such as insects, and for use with serial sections.     

A Sensitive Myelin-Sheath Stain Particularly Useful for Small Mammals and Neonatal Cats

Staining of myelinated fibers including the delicate myelin sheaths of infantile animals is as follows: perfuse the anesthetized animal with a pH 7.4 posphate-buffered fixative, either 10% formalin, 6% gluteraldehyde or a mixture containing 3% gluteraldehyde and 2% acrolein. Dissect out the brain or spinal cord and continue fixation for at least 24 hr. Cut larger brains to 1 cm in at least one dimension. Wash in running tap water 2-3 hr and soak in 2.5% potassium dichromate in 1% acetic acid (the primary mordant) for 3-5 days in darkness. Wash at least 12 hr in running tap water. Dehydrate and embed in celloidin and store in 80% ethanol. Section at 25-60 μ into 80% ethanol. Wash 1-2 min in distilled water and then immerse in 1-2% ferric alum at 50 C for at least 1 hr (the secondary mordant). Wash in tap water and stain at least 1 hr at 50-60 C in 0.5% unripened hematoxylin in 1% acetic acid. Wash well in tap water and differentiate in a mixture containing 0.5% ferrityanide, 0.5% borax and 0.5% Na₂CO₃; 2 changes. Wash well in distilled water, then in tap water, and dehydrate, clear and mount. Myelin stains black, cell bodies stain tan, and the background is pale yellow. With minor modifications in timing, the method is applicable to frozen and to paraffin sections; the primary mordant being omitted in the freezing technique.     

Staining and Mounting Helminths

The following procedure is recommended: Fix ces-todes and trematodes (while held flat between glass slides) 0.5-2.0 hr. in the following mixture: formalin, 15; acetic acid (gl.), 5; glycerol, 10; 95% ethyl alcohol, 24; distilled H₂O, 46; all proportions by volume. After freeing them from the slides, wash thoroughly in running water and stain immediately thereafter. Stock staining solution: ferric ammonium alum (violet cryst.), 2 g.; distilled H₂O (cold) 100 ml.; after solution, add 2 ml. concentrated H₂SO₄, bring to a boil; add 1 g. coelestin blue B (Nat. Aniline), boil 3-5 min.; cool and add 10 ml. absolute methyl alcohol and 10 ml. glycerol. Dilute 1 vol. with 3 vol. distilled H20 for use. Stain 5-30 min., depending on size of specimens. Wash with 2 changes 0.5 hr. each of distilled H₂O, then 50% isopropyl alcohol 12-16 hr., 50% isopropyl alcohol 2 hr., followed by graded isopropyl alcohol for dehydration. Ether: ethyl alcohol (equal parts), 1 hr., is followed by embedding in celloidin in a sheet just thick enough to cover the specimens. Trim embedded specimens and dehydrate with isopropyl alcohol, 80%, 90% and absolute. Clear in beechwood creosote. Mount in balsam with cover glasses that overlap the edges of the celloidin 1-2 mm. While drying at 37°C, refill edges of mount with fresh balsam as needed. When dry, remove excess balsam and ring the edges with ordinary gloss enamel paint.     

A Cytochemical Technique for Demonstration of Lipids,Polysaccharides and Protein Bodies in Thick Resin Sections

An effective cytochemical technique for the simultaneous demonstration of lipids, polysaccharides and protein bodies in the same section from the tissue embedded in Epon 812 is described. Thick sections of peanut cotyledon are used for a typical sample according to the following procelures. Firstly, PAS reaction: (1) Oxidize sections in 0.5% periodic acid in 0.3% nitric acid for 10 min, (2) Wash in running water for 1–2 min and then pass through distilled water, (3) Stain in Schiff's reagent for 30 min, (4) Wash in sodium metabisulfite 3 times, 2 min for each time, (5) Wash in running water for 5 min and then pass through distilled water. Secondly, Sudan black B staining: (1) Rinse section in 70% ethanol for 1-2 min, (2) Stain in fresh 1% Sudan black B in 70% ethanol for 30–60 min at 40–60℃, (3)Rinse in 70% ethanol for 1 min and then in distilled water. Thirdly, Coomassie brilliant blue R staining: (1) Rinse sections in 7% acetic acid for 1–2 min, (2) Stain in I% Coomassie brilliant blue R in 7% acetic acid for 20 min at 60℃, (3) Differentiate in 0.1% acetic acid for I min, (4) Rinse in lunning water for 5 min and then pass through distilled water, (5) Dry at room temperature or in oven, 40℃. The dry sections mount in glycerin-gelatin. After the above three step staining, the three main compounds of the cell can be stained simultaneously. Starch grains and cellulose cell wall take cherry red colour, lipids appear in black, protein bodies are blue. The sealed slides can be kept permanently.     

Staining and Mounting Helminths

The following procedure is recommended: Fix ces-todes and trematodes (while held flat between glass slides) 0.5–2.0 hr. in the following mixture: formalin, 15; acetic acid (gl.), 5; glycerol, 10; 95% ethyl alcohol, 24; distilled H₂O, 46; all proportions by volume. After freeing them from the slides, wash thoroughly in running water and stain immediately thereafter. Stock staining solution: ferric ammonium alum (violet cryst.), 2 g.; distilled H₂O (cold) 100 ml.; after solution, add 2 ml. concentrated H₂SO₄, bring to a boil; add 1 g. coelestin blue B (Nat. Aniline), boil 3–5 min.; cool and add 10 ml. absolute methyl alcohol and 10 ml. glycerol. Dilute 1 vol. with 3 vol. distilled H20 for use. Stain 5–30 min., depending on size of specimens. Wash with 2 changes 0.5 hr. each of distilled H₂O, then 50% isopropyl alcohol 12–16 hr., 50% isopropyl alcohol 2 hr., followed by graded isopropyl alcohol for dehydration. Ether: ethyl alcohol (equal parts), 1 hr., is followed by embedding in celloidin in a sheet just thick enough to cover the specimens. Trim embedded specimens and dehydrate with isopropyl alcohol, 80%, 90% and absolute. Clear in beechwood creosote. Mount in balsam with cover glasses that overlap the edges of the celloidin 1–2 mm. While drying at 37°C, refill edges of mount with fresh balsam as needed. When dry, remove excess balsam and ring the edges with ordinary gloss enamel paint.     

Streptococcal Desoxyribonuclease for the Removal of Feulgen-Stainable Material

Removal of Feulgen-stainable material from the cell nucleus was accomplished by treatment of sections with streptococcal desoxyribonuclease. The procedure recommended is (1) Deparaffinize with xylene, followed by descending grades of alcohol. (2) Wash in tap water. (3) Treat slides for 1 hour at 37°C. with streptococcal desoxyribonuclease (1000 units/ml.) in 0.025M veronal buffer of pH 7.5 containing 0.003M MgSO₄. Treat control slides for an equal length of time at the same temperature. Renew the enzyme approximately every 15 minutes. (4) Wash slides briefly in tap or distilled water. (5) Dehydrate, then coat the sections by dipping in a 1% solution of celloidin in alcohol-ether. (6) Subject the preparations to the Feulgen reaction. Control slides showed characteristic nuclear staining; enzyme treated slides did not stain.     

The Use of Bismarck Brown Y in some new Stain Schedules

The staining quality of Bismarck brown Y may be improved and sterility maintained by adding 5% phenol to a 1% aqueous solution. Use the phenolic Bismarck brown in combination with iron alum hematoxylin except for stripped epidermis in the following procedures:

Stem and Root Schedule: Mordant sections from water in 4% iron alum for 10 minutes. Rinse in distilled water and stain in 0.5% aqueous hematoxylin for 1 minute or until darkly stained. Rinse in distilled water and destain in 2% iron alum until a gray color appears. Rinse thoroly in distilled water and intensify hematoxylin by transferring sections to 0.5% aqueous lithium carbonate until the desired black color appears. Rinse thoroly in distilled water and stain for 1-5 minutes in phenolic Bismarck brown. Rinse in distilled water, dehydrate successively in 30, 50, 70, 95 and 100% alcohol. Clear in methyl salicylate for 5 minutes, then to xylene for 3-5 minutes, and mount in balsam.

Middle Lamellae in Wood: Destain more thoroly in 2% iron alum than for the general stem and root schedule, and intensify in lithium carbonate for a longer period (about 1 hour).

White Potato Tuber Sections: Modify above schedule by reducing time of destaining in 2% iron alum to about 30-60 seconds and intensify hematoxylin until starch grains appear bluish in color. Stain in phenolic Bismarck brown for 1-2 minutes.

Wheat Grain Sections: Fix grain for sectioning when in “dough” stage. Use schedule the same as for potato tuber except for reducing time of staining in phenolic Bismarck brown to about 45 seconds.

Tradescantia zebrina Epidermis: Strip epidermis from leaf while submerged in water. Fix in 100% alcohol 10 minutes, pass thru 95, 70, 50, 30, and 10% alcohol to water. Stain in phenolic Bismarck brown for 10-20 minutes. Dehydrate, clear in methyl salicylate and mount in balsam.     

Silver Staining, Featuring Rapid Reduction, For Whole Mounts of Retina and Optic Pathways in Chick Embryos

Developing and established nerve fibers in the retina and in superficial tracts of the brain can be stained and viewed en bloc. The method was developed on chick embryos of 2 days of incubation to several months post-hatching but could be used on other material provided that the objects of interest were within 35 μ of the surface. Procedure: (1) Place the entire eye or head in 50% pyridine for at least 16 hr. (2) Wash well for 5-7 hr with hourly changes of distilled water or with running tap water for 4-6 hr followed by several changes of distilled water. (3) Transfer to 95% ethanol for 16-48 hr. (4) Impregnate with 1.5% AgNO₃ for 2 days at 37 C. (5) Submerge in water and, when staining the retina, remove the vitreous body and apply an aqueous solution of 0.25% pyrogallic acid in 1.25% formalin by directing a narrow stream of this reducer against the retina for 2-5 sec. Wash the eye with distilled water 30-60 sec after applying the reducer. When staining the brain, remove the meninges under water, direct the stream of reducer against the brain for 20-30 sec, and rinse the brain immediately after the nerves have stained. (6) Dissect the specimen and make temporary mounts in glycerol; or, dehydrate and clear for resin mounting. The technique stains both mature and growing axons with their growth cones and sometimes their cell bodies. The fiber patterns show best on the surfaces of the retina and brain. The stain works consistently and is suited to the study of both normal and abnormal development.     

The Peracetic-Orcein-Halmi Stain: A Stain for Connective Tissues

A selective stain useful for the study of connective tissues is described. The stain demonstrates elastic and oxytalan fibers as well as fibrils in mucous connective tissues previously undescribed. Reticular fibers are not stained. The stain may be used on sections that have been fresh frozen or fixed in formalin or ethanol. Sections are deparaffinized, washed in absolute ethanol, oxidized in peracetic acid 30 min, washed in running water, stained in Taenzer-Unna orcein 15 min, 37°C, differentiated in 70% ethanol, washed in running water, stained in Lillie-Mayer alum hematoxylin 4 min, blued in running water, and counterstained 20 sec in a modified Halmi mixture of 100 ml distilled water, 0.2 gm light green SF, 1.0 gm orange G, 0.5 gm phosphotungstic acid and 1.0 ml glacial acetic acid. Sections are rinsed briefly in 0.2% acetic acid in 95% ethanol, dehydrated and mounted.     

A Six-Dye Staining Schedule for Sections of Mesquite and Other Desert Plants

Materials are fixed in FPA (formalin, 2; propionic acid, 1; 70% ethanol, 17). Paraffin sections on slides are brought to 50% ethanol and stained as follows: (1) in Bismarck brown Y, a 0.02% solution in 0.1% aqueous phenol, 10-30 min; wash 30 sec in 0.7% acetic acid, and wash in distilled water 20-30 sec; (2) in crystal violet, 1% in 70% ethanol alkalinized with 1 drop of 1 N NaOH per 100 ml, 12-35 min; wash 30-60 sec in tap water to remove excess stain, and rinse 0.5 sec in 70% ethanol; then mordant in I₂-KI, 1% each in 70% ethanol, 40 sec, and rinse in 70% ethanol 2-5 sec; (3) in a mixture containing 0.4% acid fuchsin and 0.6% crythrosin B in 70% ethanol about 0.5 sec; rinse in 70% ethanol 5-15 sec to remove excess red; dehydrate in 70%, 95%, and absolute ethanol, 2-3 sec each; (4) in fast green FCF, 0.5% in a mixture of equal parts of methyl cellosolve, absolute ethanol, and clove oil, 5-15 sec; rinse in a mixture of clove oil, 10 ml; absolute ethanol, 100 ml; and methyl cellosolve, 10 ml, 5-7 sec; (5) in orange G, 0.75 gm in a mixture of clove oil, 40 ml; absolute ethanol, 40 ml; and methyl cellosolve, 60 ml, 5-30 sec; rinse clean in a 1:1 mixture of xylene and absolute ethanol, 5-20 sec Complete the clearing in pure xylene, 3 changes, 1.5 min in each, and apply a cover glass with synthetic resin. Slides are agitated in all steps except Bismark brown Y, crystal violet, and the xylenes. Contrast and staining intensity are adjusted by varying staining times in the dye solutions.     

Safranin and Anilin Blue with Delafield's Hematoxylin for Staining Cell Walls in Shoot Apexes

The following technic is suggested for staining cell walls in shoot apexes: After the usual preliminary steps through 50% ethyl alcohol, stain in 1 % safranin 0 for 24 hours. Rinse in tap water and place in 2% aqueous tannic acid for 2 minutes. After rinsing in tap water, stain for 2 minutes in 1 part Delafield's hematoxylin to 2 parts distilled water and rinse in tap water. Remove excess hematoxylin with acidified water (1 drop cone. HC1 in 200 ml. water), then place slides in 0.5% lithium carbonate for 5 minutes. Dehydrate through an ethyl alcohol series, then transfer from absolute alcohol to a saturated solution of anilin blue in “methyl cellosolve” for 5-10 minutes. Wash in absolute alcohol, rinse in a solution of 25% methyl salicylate, 33% xylene, 42% absolute ethyl alcohol and clear for 10 minutes in a solution of 2 parts methyl salicylate, 1 part xylene, 1 part absolute ethyl alcohol. Transfer through two changes of xylene and mount in “clarite” or suitable alternate. The resulting preparations will have clearly defined, dark-staining cell walls and will photograph well when “Super Panchro-Press, Type B” film (Eastman Kodak Co.) is used in conjunction with suitable Wratten filters.     

An Improved Hematoxylin-Eosin Stain for Sections of Marrow Units

The procedure recommended is: Fix “marrow units” (small functional structures of bone marrow) in 10% formol-saline solution for 1-2 hours and dehydrate in 80% alcohol, 95% alcohol and acetone 30 minutes each. Place in fresh 50° and 53°C. paraffin for 30 minutes each. Embed in fresh 53°C. paraffin. Serially section at 5μ thickness and mount with Schleicher's floating solution. Allow to dry for 1 hour in an oven and deparaffinize by passing through xylene I and II, absolute alcohol I and II, and 95% alcohol. Rinse in fresh distilled water and place in dilute Harris' hematoxylin (stock solution 50 ml., distilled water 200 ml.) for 2 to 3 minutes. Rinse well in distilled water and check staining under the microscope. Dip in acid-alcohol 5 times (1 dip to equal about 1 second). Rinse well in weak (0.02%) ammonia water and distilled water. Dip in 2% aqueous phosphotungstic acid about 3 to 5 times (equal to 3-5 seconds). Rinse in fresh distilled water and place in weak ammonia water for 1 minute. Rinse in fresh distilled water I and II. Place in 80% alcohol for 5 minutes and check under the microscope for “blueness” and nuclear differentiation. Place in dilute alcoholic eosin (0.5% alcohol-eosin stock solution 10 parts and 95% alcohol 90 parts) for 1 to 2 minutes. Rinse in 80% alcohol and place for 1 minute in 95% alcohol. Check under the microscope for staining quality. Place in absolute alcohol for 1 minute, alcohol-xylene (equal parts), 10 dips, and xylene I and II. Mount. This hematoxylin-eosin staining schedule brings out minute structural detail of bone marrow tissue heretofore not demonstrable.     

A HYDROXYL-DEPENDENT SILVER METHOD FOR NERVE AXOPLASM

Axoplasm is selectively impregnated by the following steps: (1) fixation in 10% formalin or in 10% formalin with added sucrose, 15%, and concentrated NH₄OH, 1%, for 1-7 days; (2) frozen sections; (3) extraction of the sections in 95% ethyl alcohol, absolute alcohol, xylene, and 95% ethyl alcohol and absolute alcohol, 1 hr each; (4) distilled water, 3 changes of 10 min each; (5) 20% AgNO₃ (aq.) at 25°C, 30 min; (6) distilled water, 3 changes of 1-2 sec each; (7) 6.9% K₂CO₃, 1 hr; (8) water, 3 changes of about 1 min each; (9) 0.2%AuCl₃, 2 min; (10) distilled water; (11) 5% Na₂S₂O₃, 2 min; (12) washing, clearing and mounting. This procedure is proposed as a simplified stain for axoplasm, with other tissue components remaining unstained. The few reagents necessary suit this method for histochemical investigation of the mechanism of silver staining.