Compatible ternary blends of chitosan/poly(vinyl alcohol)/poly(lactic acid) produced by oil-in-water emulsion processing

Ternary compatible blends of chitosan, poly(vinyl alcohol), and poly(lactic acid) were prepared by an oil-in-water (O/W) emulsion process. Solutions of chitosan in aqueous acetic acid, poly(vinyl alcohol) (PVA) in water, and poly(lactic acid) (PLA) in chloroform were blended with a high-shear mixer. PVA was used as an emulsifier to stabilize the emulsion and to reduce the interfacial tension between the solid polymers in the blends produced. It proved to work very well because the emulsions were stable for periods of days or weeks and compatible blends were obtained when PVA was added. This effect was attributed to a synergistic effect of PVA and chitosan because the binary blends PVA/PLA and chitosan/PLA were completely incompatible. The blends were characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermal mechanical analysis (TMA), stress-strain tests, and Fourier transform infrared spectroscopy (FTIR). The results indicated that despite the fact that the system contained distinct phases some degree of molecular miscibility occurred when the three components were present in the blend.     

Electrospun core-shell nanofibers from homogeneous solution of poly(vinyl alcohol)/bovine serum albumin

We report on the preparation and characterization of core-shell structure of bovine serum albumin (BSA) blended poly(vinyl alcohol) (PVA) composite nanofibers by using electrospinning process. The core-shell structure nanofibers have been electrospun from the homogeneous solution of BSA (as shell) and PVA (as core). The morphology, chemical compositions, structure and thermal properties of the resultant products were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectrometer (EDX), high-resolution transmission electron microscopy (HR-TEM), Fourier transform infrared (FT-IR) spectroscopy, differential scanning calorimetry, thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS) techniques. The blending ratio of PVA and BSA, molecular weight of BSA and the applied voltage of electrospinning process were observed to be the key influence factors on the formation of core-shell nanofibers structure. Based on the experimental findings, we proposed a possible physical mechanism for the formation of core-shell nanofibers structure of PVA blended BSA composite.     

Electrospun water-soluble carboxyethyl chitosan/poly(vinyl alcohol) nanofibrous membrane as potential wound dressing for skin regeneration

Biocompatible carboxyethyl chitosan/poly(vinyl alcohol) (CECS/PVA) nanofibers were successfully prepared by electrospinning of aqueous CECS/PVA solution. The composite nanofibrous membranes were subjected to detailed analysis by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and X-ray diffraction (XRD). SEM images showed that the morphology and diameter of the nanofibers were mainly affected by the weight ratio of CECS/PVA. XRD and DSC demonstrated that there was strong intermolecular hydrogen bonding between the molecules of CECS and PVA. The crystalline microstructure of the electrospun fibers was not well developed. The potential use of the CECS/PVA electrospun fiber mats as scaffolding materials for skin regeneration was evaluated in vitro using mouse fibroblasts (L929) as reference cell lines. Indirect cytotoxicity assessment of the fiber mats indicated that the CECS/PVA electrospun mat was nontoxic to the L929 cell. Cell culture results showed that fibrous mats were good in promoting the cell attachment and proliferation. This novel electrospun matrix would be used as potential wound dressing for skin regeneration.     

Preparation and in vitro evaluation of xanthan gum facilitated superabsorbent polymeric microspheres

Interpenetrating polymer network (IPN) hydrogel microspheres of xanthan gum (XG) based superabsorbent polymer (SAP) and poly(vinyl alcohol) (PVA) were prepared by water-in-oil (w/o) emulsion crosslinking method for sustained release of ciprofloxacin hydrochloride (CIPRO). The microspheres were prepared with various ratios of hydrolyzed SAP to PVA and extent of crosslinking density. The prepared microspheres with loose and rigid surfaces were evidenced by scanning electron microscope (SEM). Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the IPN formation. Differential scanning calorimetry (DSC) study was performed to understand the dispersion nature of drug after encapsulation. The in vitro drug release study was extensively evaluated depending on the process variables in both acidic and alkaline media. All the formulations exhibited satisfactory physicochemical and in vitro release characteristics. Release data indicated a non-Fickian trend of drug release from the formulations. Based on the results, this study suggest that CIPRO loaded IPN microspheres were suitable for sustained release application.     

Interpenetrating polymer network (IPN) hydrogel microspheres for oral controlled release application

Interpenetrating polymer network (IPN) hydrogel microspheres of sodium carboxymethyl cellulose (NaCMC) and poly(vinyl alcohol) (PVA) were prepared by water-in-oil (w/o) emulsion crosslinking method for oral controlled release delivery of a non-steroidal anti-inflammatory drug, diclofenac sodium (DS). The microspheres were prepared with various ratios of NaCMC to PVA, % drug loading and extent of crosslinking density at a fixed polymer weight. The prepared microspheres with loose and rigid surfaces were evidenced by scanning electron microscope (SEM). Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the IPN formation. Differential scanning calorimetry (DSC) study was performed to understand the dispersion nature of drug after encapsulation. The in vitro drug release study was extensively evaluated depending on the process variables in both acid and alkaline media. All the formulations exhibited satisfactory physicochemical and in vitro release characteristics. Release data indicated a non-Fickian trend of drug release from the formulations. Based on the results of this study suggest that DS loaded IPN microspheres were suitable for oral controlled release application.     

Vitrification enhancement by synthetic ice blocking agents

Small concentrations of the synthetic polymer polyvinyl alcohol (PVA) were found to inhibit formation of ice in water/cryoprotectant solutions. Ice inhibition improved with decreasing molecular weight. A PVA copolymer of molecular weight 2 kDa consisting of 20% vinyl acetate was found to be particularly effective. PVA copolymer concentrations of 0.001, 0.01, 0.1, and 1% w/w decreased the concentration of glycerol required to vitrify in a 10-ml volume by 1, 3, 4, and 5% w/w, respectively. Dimethyl sulfoxide concentrations required for vitrification were also reduced by 1, 2, 2, and 3% w/w, respectively. Crystallization of ice on borosilicate glass in contact with cryoprotectant solutions was inhibited by only 1 ppm of PVA copolymer. Devitrification of ethylene glycol solutions was also strongly inhibited by PVA copolymer. Visual observation and differential scanning calorimeter data suggest that PVA blocks ice primarily by inhibition of heterogeneous nucleation. PVA thus appears to preferentially bind and inactivate heterogeneous nucleators and/or nascent ice crystals in a manner similar to that of natural antifreeze proteins found in cold-hardy fish and insects. Synthetic PVA-derived ice blocking agents can be produced much less expensively than antifreeze proteins, offering new opportunities for improving cryopreservation by vitrification.     

Synthesis,characterization and optical properties of polymer‐based ZnS nanocomposites

Nanostructured polymer–semiconductor hybrid materials such as ZnS–poly(vinyl alcohol) (ZnS–PVA), ZnS–starch and ZnS–hydroxypropylmethyl cellulose (Zns–HPMC) are synthesized by a facile aqueous route. The obtained nanocomposites are characterized using various techniques such as X‐ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), UV/vis spectroscopy and photoluminescence (PL). XRD studies confirm the zinc blende phase of the nanocomposites and indicate the high purity of the samples. SEM studies indicate small nanoparticles clinging to the surface of a bigger particle. The Energy Dispersive Analysis by X‐rays (EDAX) spectrum reveals that the elemental composition of the nanocomposites consists primarily of Zn:S. FTIR studies indicate that the polymer matrix is closely associated with ZnS nanoparticles. The large number of hydroxyl groups in the polymer matrix facilitates the complexation of metal ions. The absorption spectra of the specimens show a blue shift in the absorption edge. The spectrum reveals an absorption edge at 320, 310 and 325 nm, respectively. PL of nanocomposites shows broad peaks in the violet–blue region (420–450 nm). The emission intensity changes with the nature of capping agent. The PL intensity of ZnS–HPMC nanocomposites is found to be highest among the studied nanocomposites. The results clearly indicate that hydroxyl‐functionalized HPMC is much more effective at nucleating and stabilizing colloidal ZnS nanoparticles in aqueous suspensions compared with PVA and starch. Copyright © 2015 John Wiley & Sons, Ltd.     

Physicochemical and bioactivity of cross-linked chitosan–PVA film for food packaging applications

This work aimed to develop a novel antimicrobial coating based on chitosan and PVA to evaluate its effect on minimally processed tomato by means of microbiological analyses. In this report an antimicrobial film was prepared by blending chitosan (CS) and poly(vinyl alcohol) (PVA) with glutaraldehyde as the cross-linker. The miscibility and morphology of the film were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The thermal property of the chitosan–PVA film was examined by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The microbiological screening has demonstrated the antimicrobial activity of the film against food pathogenic bacteria viz. Escherichia coli, Staphylococcus aureus, and Bacillus subtilis. The obtained results indicate the film may be a promising material for food packaging applications.     

Degradation Mechanism of Poly(vinyl alcohol) by Successive Reactions of Secondary Alcohol Oxidase and β-Diketone Hydrolase from Pseudomonas sp.

The secondary alcohol oxidase from Pseudomonas sp. catalyzed the oxidation of various vinyl alcohol oligomers with the molecular weight of 220 to 1500 and of β-ketols such as 5-hydroxy-3-heptanone, 4-hydroxy-2-nonanone, 3-hydroxy-5-nonanone, 6-hydroxy-4-nonanone, 7-hydroxy-5-dodecanone, and 8-hydroxy-6-tridecanone. β-Diketone hydrolase from the same strain catalyzed the hydrolysis of various aliphatic β-diketones and some aromatic β-diketones such as 1-phenyl-1,3-butanedione and 1-phenyl-2,4-pentanedione. 4,6-Nonanediol, used as a low molecular weight model of poly(vinyl alcohol) (PVA), was oxidized to 4,6-nonanedione by way of 6-hydroxy-4-nonanone by secondary alcohol oxidase. 4,6-Nonanedione was hydrolyzed to 2-pentanone and n-butyric acid by β-diketone hydrolase. These reactions were stoichiometric.

The presence of the β-diketone structure in PVA oxidized by secondary alcohol oxidase was confirmed by spectral experiments. The absorption due to β-diketone structure in the oxidized PVA decreased as it was hydrolyzed by β-diketone hydrolase. The ratio of the amount of carboxyl groups in the degraded PVA to that of carbonyl groups in the oxidized PVA became more than 0.5. A pathway for the enzymatic degradation of PVA was proposed.     

Modification of chitosan membrane with poly(vinyl alcohol) and biocompatibility evaluation

This work aimed to overcome chitosan (CS) membrane' drawbacks: mainly stiffness and hydrophobic surface by adding poly(vinyl alcohol) (PVA) and evaluate their biocompatibility. The chemical structure, crystalline and thermal properties were studied by FT-IR, XRD and DSC. The mechanical properties and wettability of CS/PVA membranes were studied by tensile test and static contact angle measurement. In vitro biocompatibility was also evaluated by MTS cytotoxicity assay and SEM examination. The results suggest that adding PVA into CS membrane could greatly improve CS membrane's flexibility and wettability. All the membranes prepared were biocompatible and have potential applications in GTR technology.     

Investigation of PVA/ws-chitosan hydrogels prepared by combined γ-irradiation and freeze-thawing

γ-Irradiation combined with freeze-thawing, i.e. irradiation followed by freeze-thawing and freeze-thawing followed by irradiation, was applied to prepare poly(vinyl alcohol) (PVA)/water soluble chitosan (ws-chitosan) hydrogels for wound dressing. The properties of these hydrogels were investigated and compared to those prepared by freeze-thawing and by irradiation, respectively. Hydrogels made by irradiation followed by freeze-thawing show larger swelling capacity and mechanical strength, higher thermal stability, lower water evaporation rate, and are less turbid than those made by pure freeze-thawing and freeze-thawing followed by irradiation. Hydrogels made by irradiation alone cannot be used as wound dressing due to their poor mechanical strength. SEM results show that the final structure of hydrogels made by combined irradiation and freeze-thawing is mainly determined by the first processing step. It is found that the appropriate amount of ws-chitosan can endow hydrogels with large swelling capacity and mechanical strength. The presence of ws-chitosan provides the hydrogels with good antibacterial activity against Escherichia coli (E. coli).     

Electrospinning of poly(vinyl alcohol)-water-soluble quaternized chitosan derivative blend

Defect free mats containing a cationic polysaccharide, chitosan derivative such as N-[(2-hydroxy-3-trimethylammonium)propyl] chitosan chloride (HTCC), have been prepared using electrospinning of an aqueous solution of poly(vinyl alcohol) (PVA)-HTCC blends. HTCC, a water-soluble derivative of chitosan, was synthesized via the reaction between glycidyl-trimethylammonium chloride and chitosan. Solutions of PVA-HTCC Blends were electrospun. The morphology, diameter and structure of the produced electrospun nanofibres were examined by scanning electron microscopy (SEM). The average fibre diameter was in the range of 200-600 nm. SEM images showed that the morphology and diameter of the nanofibres were mainly affected by weight ratio of the blend and applied voltage. The results revealed that increasing HTCC content in the blends decreases the average fibre diameter. These observations were discussed on the basis of shear viscosities and conductivities of the spinning solutions. Microbiological assessment showed that the PVA-HTCC mats have a good antibacterial activity against Gram-positive bacteria, Staphylococcus aureus, and Gram-negative bacteria, Escherichia coli.     

Synthesis of antibacterial PVA/CM-chitosan blend hydrogels with electron beam irradiation

A series of excellent hydrogels were prepared from poly(vinyl alcohol) (PVA) and carboxymethylated chitosan (CM-chitosan) with electron beam irradiation (EB) at room temperature. Electron spectroscopy analysis of the blend hydrogels revealed that good miscibility was sustained between CM-chitosan and PVA. The properties of the prepared hydrogels, such as the mechanical properties, gel fraction and swelling behavior were investigated. The mechanical properties and equilibrium degree of swelling improved obviously after adding CM-chitosan into PVA hydrogels. The gel fraction determined gravimetrically showed that a part of CM-chitosan was immobilized onto PVA hydrogel. The further analyses of FTIR and DSC spectra of the prepared gels after extracting sol manifested that there was a grafting interaction between PVA and CM-chitosan molecules under irradiation. The antibacterial activity of the hydrogels against Escherichia coli was also measured via optical density method. The blend hydrogels exhibited satisfying antibacterial activity against E. coli, even when the CM-chitosan concentration was only 3 wt%.     

Nanofibers from blends of polyvinyl alcohol and polyhydroxy butyrate as potential scaffold material for tissue engineering of skin

Nanofibers were prepared by electrospinning from pure polyvinyl alcohol (PVA), polyhydroxybutyrate (PHB), and their blends. Miscibility and morphology of both polymers in the nanofiber blends were studied by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and differential scanning calorimetry (DSC), revealing that PVA and PHB were miscible with good compatibility. DSC also revealed suppression of crystallinity of PHB in the blend nanofibers with increasing proportion of PVA. The hydrolytic degradation of PHB was accelerated with increasing PVA fraction. Cell culture experiments with a human keratinocyte cell line (HaCaT) and dermal fibroblast on the electrospun PHB and PVA/PHB blend nanofibers showed maximum adhesion and proliferation on pure PHB. However, the addition of 5 wt % PVA to PHB inhibited growth of HaCaT cells but not of fibroblasts. On the contrary, adhesion and proliferation of HaCaT cells were promoted on PVA/PHB (50/50) fibers, which inhibited growth of fibroblasts.     

Rheological characterisation of a novel thermosensitive chitosan/poly(vinyl alcohol) blend hydrogel

Thermosensitive hydrogels that are triggered by changes in environmental temperature thus resulting in in situ hydrogel formation have recently attracted the attention of many investigators for biomedical applications. In the current work, the thermosensitive hydrogel was prepared through the mixture of chitosan (CS), poly(vinyl alcohol) (PVA) and sodium bicarbonate. The mixture was liquid aqueous solutions at low temperature (about 4 °C), but a gel under physiological conditions. The hydrogel was characterized by FTIR, swelling and rheological analysis. The effect of hydrogel composition and temperature on both the gel process and the gel strength was investigated from which possible hydrogel formation mechanisms were inferred. In addition, the hydrogel interior morphology as well as porosity of structure was evaluated by scanning electron microscopy (SEM). The potential of the hydrogels as vehicles for delivering bovine serum albumin (BSA) were also examined. In this study, the physically crosslinked chitosan/PVA gel was prepared under mild conditions without organic solvent, high temperature or harsh pH. The viscoelastic properties, as investigated rheologically, indicate that the gel had good mechanical strength. The gel formed implants in situ in response to temperature change, from low temperature (about 4 °C) to body temperature, which was very suitable for local and sustained delivery of proteins, cell encapsulation and tissue engineering.     

Synthesis and character investigation of new collagen Hydrolysate/polyvinyl alcohol/hydroxyapatite Polymer-Nano-Porous Membranes: I. Experimental design optimization in thermal and structural properties

Abstract

Development of bioorganic–inorganic composites has drawn eyes to extensive attention in biomedical fields and tissue engineering. So many attempts to prepare hydroxyapatite (HA), in conjunction with various binders including polyvinyl alcohol (PVA), and collagen has performed for late 20 years. We applied a method based on the phase separation for making of polymer porous membranes. This procedure is induced through the addition of a small quantity of water (polymer-rich phase) to a solution with HA precursors (polymer-poor phase). Thermal and structural composite properties of collagen Hydrolysate (CH)–PVA/HA Polymer-Nano-Porous Membranes were analyzed by Design of experiment that was undertaken using D-optimal approach, to select the optimal combination of nano composites precursor. The resulted composite characters were investigated by Fourier transform infrared, scanning electron microscopy (SEM) and thermal gravimetric analysis. Based on the SEM images, this new method could be clearly concluded to porous CH–PVA/HA hybrid materials. Finally the hemocompatibility of nanocomposite membranes were evaluated by the hemolysis study.

Graphical Abstract

Open in a separate window     

Immobilization of Candida cylindracea lipase on poly lactic acid,polyvinyl alcohol and chitosan based ternary blend film: Characterization,activity, stability and its application for N-acylation reactions

The ecofriendly ternary blend polymer film was prepared from the chitosan (CH), polylactic acid (PLA) and polyvinyl alcohol (PVA). Immobilization of Candida cylindracea lipase (CCL) was carried out on ternary blend polymer via entrapment methodology. The ternary blend polymer and immobilized biocatalyst were characterized by using N₂ adsorption–desorption isotherm, SEM, FTIR, DSC, and (%) water content analysis through Karl Fischer technique. Biocatalyst was then subjected for the determination of practical immobilization yield, protein loading and specific activity. Immobilized biocatalyst was further applied for the determination of biocatalytic activity for N-acylation reactions. Various reaction parameters were studied such as effect of immobilization support (ratio of PLA:PVA:CH), molar ratio (dibutylamine:vinyl acetate), solvent, biocatalyst loading, time, temperature, and orbital speed rotation. The developed protocol was then applied for the N-acylation reactions to synthesize several industrially important acetamides with excellent yields. Interestingly, immobilized lipase showed fivefold higher catalytic activity and better thermal stability than the crude extract lipase CCL. Furthermore various kinetic and thermodynamic parameters were studied and the biocatalyst was efficiently recycled for four successive reuses. It is noteworthy to mention that immobilized biocatalyst was stable for period of 300 days.     

The plasticizing mechanism and effect of calcium chloride on starch/poly(vinyl alcohol) films

Starch/poly(vinyl alcohol) (PVA) films were prepared with calcium chloride (CaCl(2)) as the plasticizer. The micro morphology of pure starch/PVA film and CaCl(2) plasticized starch/PVA film was observed by scanning electron microscope. The interaction between CaCl(2) and starch/PVA molecules was investigated by Fourier transform infrared spectroscopy. The influence of CaCl(2) on the crystalline, thermal and mechanical properties of starch/PVA films was studied by X-ray diffraction, differential scanning calorimetry, thermogravimetric analysis, and tensile testing, respectively. The results indicated that CaCl(2) could interact with starch and PVA molecules and then effectively destroy the crystals of starch and PVA. Starch/PVA films plasticized with CaCl(2) became soft and ductile, with lower tensile strength and higher elongation at break compared with pure starch/PVA film. The water content of starch/PVA film would increase with the addition of CaCl(2). This is an important cause of the plasticization of CaCl(2) on starch/PVA film.     

Studies of chitosan: II. Preparation and characterization of chitosan/poly(vinyl alcohol)/gelatin ternary blend films

Chitosan/poly(vinyl alcohol)/gelatin (CS/PVA/GA) ternary blend films were prepared by solution blending method in this study. The thermal properties of the CS/PVA/GA ternary blend films were examined by differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The melting point of the CS/PVA/GA ternary blend film was increased when the amount of GA in the blend film was increased based upon the DSC thermal analysis. Results of X-ray diffraction (XRD) analyses indicated that the intensity of diffraction peak at 19 degrees of PVA became lower and broader with increasing the amount of GA in the CS/PVA/GA ternary blend film. Although CS, PVA, and GA are hydrophilic biodegradable polymers, the results of water contact angle measurements are still as high as 83 degrees, 68 degrees, and 66 degrees, respectively. A minimum water contact angle (56 degrees) was observed when the ternary blend film contains 50 wt.% GA (i.e. GA5). This behavior is primarily due to the reorientation of polar functional groups toward to the top surface of CS/PVA/GA ternary blend films.     

Electrical behavior of polymer hydrogel composed of poly(vinyl alcohol)-hyaluronic acid in solution

Interpenetrating polymer networks (IPN), as polymer hydrogels composed of poly(vinyl alcohol) (PVA) and hyaluronic acid (HA), which exhibited electrical sensitive behavior were prepared. The swelling behavior of the IPN/HA IPN was studied by immersing the gel in various concentrations of aqueous NaCl solutions and various pH buffer solutions. The response of the PVA/HA IPN to electric fields stimuli was also investigated. When swollen IPN was placed between a pair of electrodes, and an electric field applied, it exhibited bending behavior. The PVA/HA IPN also displayed stepwise bending behavior, depending on the magnitude of the electric stimulus. Also, for use in biosensors application, their bending behavior was studied in Hank's solution at pH 7.4.