Effects of tubulin acetylation and tubulin acetyltransferase binding on microtubule structure

Tubulin undergoes posttranslational modifications proposed to specify microtubule subpopulations for particular functions. Most of these modifications occur on the C-termini of tubulin and may directly affect the binding of microtubule-associated proteins (MAPs) or motors. Acetylation of Lys-40 on α-tubulin is unique in that it is located on the luminal surface of microtubules, away from the interaction sites of most MAPs and motors. We investigate whether acetylation alters the architecture of microtubules or the conformation of tubulin, using cryo–electron microscopy (cryo-EM). No significant changes are observed based on protofilament distributions or microtubule helical lattice parameters. Furthermore, no clear differences in tubulin structure are detected between cryo-EM reconstructions of maximally deacetylated or acetylated microtubules. Our results indicate that the effect of acetylation must be highly localized and affect interaction with proteins that bind directly to the lumen of the microtubule. We also investigate the interaction of the tubulin acetyltransferase, αTAT1, with microtubules and find that αTAT1 is able to interact with the outside of the microtubule, at least partly through the tubulin C-termini. Binding to the outside surface of the microtubule could facilitate access of αTAT1 to its luminal site of action if microtubules undergo lateral opening between protofilaments.     

Formation and functions of asymmetric microtubule organization in polarized cells

Although microtubules are known to be essential for chromosome segregation during cell division, they also play important roles in the regulation and function of cell polarity. Cell polarization is fundamental to appropriate tissue patterning and the regulation of cellular diversity during animal development. In polarized cells, microtubules are often organized asymmetrically along the polarity axis. Recent studies show that such asymmetry in microtubule organization is important to connect a cell's polarization with its polarized functions. In some cases, asymmetrically organized microtubule arrays themselves induce cell polarity. Here we present an overview of the mechanisms and functions of asymmetric microtubule organization and discuss the possible role of microtubule asymmetry in the symmetry-breaking that leads to cell polarization.     

Microtubules: MEC-17 moonlights in the lumen

New research characterizes a tubulin acetyltransferase that acts inside the microtubule lumen and has two separable activities that greatly affect microtubule architecture and functionality.     

Buffer conditions and non-tubulin factors critically affect the microtubule dynamic instability of sea urchin egg tubulin.

The dynamic instability of individual microtubules (Mts) in cytoplasmic extracts or assembled from highly purified sea urchin egg tubulin was examined using video-enhanced, differential-interference contrast (VE-DIC) light microscopy. Extract Mts (endogenous tubulin = 12.1 microM) displayed only plus-ended growth. The elongation velocity was 7.8 microns/min for an average duration of 1.3 min before switching (catastrophe) to rapid shortening, which occurred at 13.0 microns/min for an average duration of 0.5 min before switching (rescue) back to the elongation phase. These parameters are typical of interphase Mt dynamic instability. Surprisingly, Mts assembled from purified urchin egg tubulin in standard buffers were less dynamic that those reported for purified brain tubulin or Mts in the extract. Buffer parameters were changed in an attempt to mimic the extract Mt results. The pH buffer itself, Hepes or Pipes, drastically altered Mt dynamics but could not achieve high elongation velocity with high catastrophe frequencies. Calcium at 1 microM had negligible effects, while increasing pH from 6.9 to 7.2 stimulated elongation velocity. Finally, Mt dynamics of purified egg tubulin (11.9 microM) were assayed in ultrafiltrates (MW cut-off less than 30 kD) of the cytoplasmic extracts. Mts elongated slowly at 1.2 microns/min for 26 min before a catastrophe and rapid shortening at 11.8 microns/min. Rescue was less frequent than unfiltered extracts, minus-ended growth was observed, and self-assembly occurred at slightly higher tubulin concentrations. Therefore, the egg extracts and cytoplasm must contain non-buffer factors which stimulate elongation velocity by 6.5-fold without self-assembly, increase catastrophe frequency by 20-fold, and block minus-ended growth.     

Effects of amino-acid substitutions in β tubulin on benomyl sensitivity and microtubule functions inCoprinus cinereus

The sensitivity of the homobasidiomyceteCoprinus cinereus to the benzimidazole fungicide benomyl allowed us to isolate β-tubulin mutants as strains resistant to benomyl. To understand the molecular basis for the interaction between benomyl and β tubulin and for cellular defects in the β-tubulin mutants, we first analyzed the wild-type β1-tubulin gene (benA) ofC. cinereus, revealing thatbenA contains eight introns and encodes a 445 amino-acid protein. We then characterized 16 β1-tubulin mutants. The 16 mutations involved 11 different amino-acid substitutions at 10 different residues in β1 tubulin. The mutated residues were widely distributed along the primary sequence of β1 tubulin, from residue 3 in the N-terminal domain to residue 350 in the intermediate domain, but half of them appeared to be close to the αβ intradimer interface in an atomic model determined by electron crystallography. The benomyl resistant strain BEN 193, which exhibits clear heat sensitivity for hyphal growth and defects in various cellular processes, had a novel mutation, i.e., the Leu to Phe substitution at residue 350. Benomyl resistance and the heat sensitivity in BEN 193 were suppressed by additional amino-acid substitutions at various residues in β1 tubulin, suggesting that conformational changes of β1 tubulin are involved in the alterations. The DDBJ/GeneBank/EMBL accession number for the sequence reported in this paper is AB000116.     

CSPP and CSPP-L associate with centrosomes and microtubules and differently affect microtubule organization

We recently described the identification of a centrosome/spindle pole associated protein, CSPP, involved in cell cycle progression. Here we report a CSPP isoform denoted CSPP-L, with a 294 amino acids longer N-terminus and a 51 amino acids insertion located in the coiled-coil mid-domain. Expression analysis indicates an inverse cell cycle dependent regulation. CSPP mRNA expression is highest in G1 whereas CSPP-L expression is highest in G2/M. Ectopic expression of CSPP-L impairs cell cycle progression weaker in G1 than CSPP. Furthermore, normal mitotic phenotypes were observed in CSPP-L but not in CSPP transfectants. CSPP-L relocates from spindle microtubules and poles in metaphase to the mid-spindle in anaphase and concentrates at the mid-body in telophase/cytokinesis. CSPP-L high-expressing mitotic cells were predominantly characterized by lagging chromosomes or monopolar spindles, in contrast to the predominant multipolar spindles observed with CSPP expression. The different effects of CSPP and CSPP-L on microtubule organization in mitosis depend on the coiled-coil mid-domain insertion. The common C-terminal domain is required to repress that activity until mitosis. Notably, this C-terminal domain alone can associate with centrosomes in a microtubule independent manner. Taken together, CSPP and CSPP-L interact with centrosomes and microtubules and can differently affect microtubule organization.     

Visualization of lactoperoxidase binding to microtubule and tubulin

The binding of lactoperoxidase to microtubules and tubulin was shown in both electron micrography and polyacrylamide gel electrophoresis by tracing the enzymatic activity of lactoperoxidase. Lactoperoxidase bound to purified microtubules appeared to distribute evenly on the surface without forming special structures. Both alpha and beta-tubulin separated by sodium dodecylsulfate-polyacrylamide gel electrophoresis bound lactoperoxidase, and could be detected by the use of lactoperoxidase reaction. Electrophoretic study revealed that the interaction between lactoperoxidase and tubulin were not strictly specific and a variety of proteins other than alpha- and beta-tubulin, including actin and neurofilament subunits, bound lactoperoxidase.     

Mechanism of microtubule assembly. Changes in polymer structure and organization during assembly of sea urchin egg tubulin

Assembly of tubulin, purified from eggs of the sea urchin Stronglyocentrotus purpuratus, was examined at physiological (18 degrees C) and nonphysiological (37 degrees C) temperatures. Critical concentrations for assembly were 0.71 mg/ml at 18 degrees C and 0.21 mg/ml at 37 degrees C. At tubulin concentrations above 1.2 mg/ml at 18 degrees C and 0.5 mg/ml at 37 degrees C, a concentration-dependent "overshoot" in turbidity and in small-angle light scattering was observed; turbidity and scattering increased rapidly to a peak, then decreased asymptotically toward a steady-state value. Quantitative sedimentation analysis revealed that the mass of assembled polymer reached and maintained a constant level during overshoot of turbidity. Changes in the wavelength dependence of turbidity were consistent with the initial formation of sheets of tubulin, followed by conversion of the sheets to microtubules, both at 18 and 37 degrees C. Examination by negative-stain electron microscopy showed that sheetlike structures predominated during the early stages of overshoot assembly, while complete microtubules were present at steady state. Furthermore, measurements of average polymer length revealed that the overshoots in turbidity and in light scattering are unlikely to be caused by polymer length redistribution. Qualitative observations of solution birefringence suggested that the polymer became progressively more aligned during assembly. These results suggest that the turbidity/light-scattering overshoots reflect changes in the form or in the organization of the assembling polymer, or both.     

Peroxynitrite oxidation of tubulin sulfhydryls inhibits microtubule polymerization

Considerable evidence both in vitro and in vivo implicates protein damage by peroxynitrite as a probable mechanism of cell death. Herein, we report that treatment of bovine brain microtubule protein, composed of tubulin and microtubule-associated proteins, with peroxynitrite led to a dose-dependent inhibition of microtubule polymerization. The extent of cysteine oxidation induced by peroxynitrite correlated well with inhibition of microtubule polymerization. Disulfide bonds between the subunits of the tubulin heterodimer were detected by Western blot as a result of peroxynitrite-induced cysteine oxidation. Addition of disulfide reducing agents including dithiothreitol and beta-mercaptoethanol restored a significant portion of the polymerization activity that was lost following peroxynitrite addition. Thus, peroxynitrite-induced disulfide bonds are at least partially responsible for the observed inhibition of polymerization. Sodium bicarbonate protected microtubule protein from the peroxynitrite-induced inhibition of polymerization. Tyrosine nitration of microtubule protein by 1 mM peroxynitrite increased approximately twofold when sodium bicarbonate was present whereas the extent of cysteine oxidation decreased from 7.5 to 6.3 mol cysteine/mol tubulin. These results indicate that cysteine oxidation of tubulin by peroxynitrite, rather than tyrosine nitration, is the primary mechanism of inhibition of microtubule polymerization.     

Porphyrins affect the self-assembly of tubulin in solution

Self-assembly of tubulin heterodimers in solution has been studied in the past to predict the effects that ligands and/or conformational changes have on the formation of tubulin filaments. Self-assembly of tubulin in solution has produced formations similar to cellular microtubules (MTs). The present study reports on the effects that two porphyrins (protoporphyrin IX, PPIX and tetrakis(4-sulfonatophenyl)porphyrin, TPPS) produce on the self-assembly of tubulin α,β-heterodimers in buffer solution. The study shows that, when incubated simultaneously with MT-stabilizing ligands (i.e., paclitaxel and guanosine triphosphate, GTP), porphyrins do not affect the ability of tubulin to form MT. However, if paclitaxel and GTP are added after tubulin has been allowed to self-assemble in the presence of either porphyrin, the ability to form MT-like structures is reduced or suppressed. We suggest that this effect is due to the formation of porphyrin-mediated aggregates that cannot be broken or elongated by the addition of GTP or paclitaxel.     

Immunological detection of microtubule poison-induced conformational changes in tubulin

The interaction of tubulin-microtubule poison complexes with anti-tubulin antisera has been investigated using radioimmunoassay. The binding of the major antiserum used in this study to tubulin does not interfere with the binding of colchicine to the tubulin or affect the decay of the colchicine-binding activity of the tubulin. Conversely, if colchicine is incubated with the tubulin, forming tubulin-colchicine complexes, the tubulin-colchicine complexes are less efficient competitors for antibody-binding sites than tubulin alone. This is the result of the formation of specific colchicine-tubulin complexes, since tubulin, incubated with lumicolchicine or isocolchicine, behaves as if the tubulin were incubated alone in the radioimmunoassay. When tubulin is incubated with other microtubule poisons, podophyllotoxin or vinblastine, the tubulin-drug complexes have diminished ability to compete with tubulin as did the tubulin-colchicine complexes. These changes observed in the binding of tubulin-microtubule poison complexes to anti-tubulin antisera in a tubulin radioimmunoassay suggest that the binding of colchicine, podophyllotoxin, or vinblastine to tubulin induces subtle conformational changes on the surface of the tubulin dimer involving antigenic determinant sites.     

Erythrocyte microtubule assembly in vitro. Determination of the effects of erythrocyte tau, tubulin isoforms, and tubulin oligomers on erythrocyte tubulin assembly, and comparison with brain microtubule assembly

Two tubulin variants, isolated from chicken brain and erythrocytes and known to have different peptide maps and electrophoretic properties, are demonstrated to exhibit different assembly properties in vitro: 1) erythrocyte tubulin assembles with greater efficiency (lower critical concentration, greater elongation rate) but exhibits a lower nucleation rate than brain tubulin, and 2) erythrocyte tubulin readily forms oligomers whose presence significantly retards the rate of elongation, suggesting that tubulin oligomers may also be important for determining the rate of assembly and the length of microtubules in erythrocytes. Erythrocyte tubulin isolated by cycles of in vitro assembly-disassembly is also demonstrated to contain a 67-kDa tau factor that greatly enhances microtubule nucleation but has little effect on elongation rates or critical concentration. Immunofluorescence microscopy with tau antibody indicates that tau is specifically associated with marginal band microtubules, suggesting that it may be important for determining microtubule function in vivo.     

Regional variation of microtubule flux reveals microtubule organization in the metaphase meiotic spindle

Continuous poleward movement of tubulin is a hallmark of metaphase spindle dynamics in higher eukaryotic cells and is essential for stable spindle architecture and reliable chromosome segregation. We use quantitative fluorescent speckle microscopy to map with high resolution the spatial organization of microtubule flux in Xenopus laevis egg extract meiotic spindles. We find that the flux velocity decreases near spindle poles by ~20%. The regional variation is independent of functional kinetochores and centrosomes and is suppressed by inhibition of dynein/dynactin, kinesin-5, or both. Statistical analysis reveals that tubulin flows in two distinct velocity modes. We propose an association of these modes with two architecturally distinct yet spatially overlapping and dynamically cross-linked arrays of microtubules: focused polar microtubule arrays of a uniform polarity and slower flux velocities are interconnected by a dense barrel-like microtubule array of antiparallel polarities and faster flux velocities.     

Loss of MEC-17 Leads to Microtubule Instability and Axonal Degeneration

1. Download : Download full-size image

     

Molecular dynamics modeling of tubulin C-terminal tail interactions with the microtubule surface

Tubulin, an α/β heterodimer, has had most of its 3D structure analyzed; however, the carboxy (C)-termini remain elusive. Importantly, the C-termini play critical roles in regulating microtubule structure and function. They are sites of most of the post-translational modifications of tubulin and interaction sites with molecular motors and microtubule-associated proteins. Simulated annealing was used in our molecular dynamics modeling to predict the interactions of the C-terminal tails with the tubulin dimer. We examined differences in their flexibility, interactions with the body of tubulin, and the existence of structural motifs. We found that the α-tubulin tail interacts with the H11 helix of β-tubulin, and the β-tubulin tail interacts with the H11 helix of α-tubulin. Tail domains and H10/B9 loops interact with each other and compete for interactions with positively-charged residues of the H11 helix on the neighboring monomer. In a simulation in which α-tubulin's H10/B9 loop switches on sub-nanosecond intervals between interactions with the C-terminal tail of α-tubulin and the H11 helix of β-tubulin, the intermediate domain of α-tubulin showed more fluctuations compared to those in the other simulations, indicating that tail domains may cause shifts in the position of this domain. This suggests that C-termini may affect the conformation of the tubulin dimer which may explain their essential function in microtubule formation and effects on ligand binding to microtubules. Our modeling also provides evidence for a disordered-helical/helical double-state system of the T3/H3 region of the microtubule, which could be linked to depolymerization following GTP hydrolysis.     

HURP wraps microtubule ends with an additional tubulin sheet that has a novel conformation of tubulin

HURP is a newly discovered microtubule-associated protein (MAP) required for correct spindle formation both in vitro and in vivo. HURP protein is highly charged with few predicted secondary and tertiary folding domains. Here we explore the effect of HURP on pure tubulin, and describe its ability to induce a new conformation of tubulin sheets that wrap around the ends of intact microtubules, thereby forming two concentric tubes. The inner tube is a normal microtubule, while the outer one is a sheet composed of tubulin protofilaments that wind around the inner tube with a 42.5° inclination. We used cryo-electron microscopy and unidirectional surface shadowing to elucidate the structure and conformation of HURP-induced tubulin sheets and their interaction with the inner microtubule. These studies clarified that HURP-induced sheets are composed of anti-parallel protofilaments exhibiting P2 symmetry. HURP is a unique MAP that not only stabilizes and bundles microtubules, but also polymerizes free tubulin into a new configuration.     

Selenium: inhibition of microtubule formation and interaction with tubulin.

We have studied the interaction of Na2SeO3 with microtubule proteins and tubulin. This selenium compound inhibits the polymerization of MTP (half-inhibition occurred for Na2SeO3 10 microM), and to a lesser that of tubulin. This effect of selenite is related to the formation of disulfide bridges between tubulin sulfhydryl groups, inducing a conformational change of the protein. This is corroborated by the modified binding of colchicine and vinblastine in presence of selenium. The selenite inhibitory concentrations are similar to the toxic blood levels of selenium (40 microM).     

Quantitative analysis of tubulin and microtubule compartments in isolated rat hepatocytes

A combined morphometric and biochemical approach has been used to identify and quantitate microtubules and tubulin in isolated hepatocytes. The total soluble pool of microtubule protein was estimated by specific high affinity binding to radiolabeled colchicine. Scatchard analysis of the data identified two populations of binding sites: high affinity-low capacity sites resembling tubulin and low affinity-high capacity sites believed to represent nonspecific colchicine-binding sites. Data from these studies indicate that tubulin represents 1% of the soluble protein of the cell, that 9.0 X 10(-14) dimers of tubulin are present per microgram soluble hepatocyte protein, and that the average hepatocyte contains 3.1 X 10(7) tubulin dimers. Our calculations suggest that this amount of tubulin would form a microtubule 1.9 cm in length if totally assembled. However, stereological measurements indicate that the actual length of microtubules in the cytosolic compartment of the average hepatocyte is only 0.28 cm. Thus, these experiments suggest that only 15% of the available tubulin in hepatocytes of postabsorptive rats is assembled in the form of microtubules.