Role of DNase in recovery of plasmid DNA from Clostridium perfringens

Recovery of plasmid DNA from Clostridium perfringens 10543A and 3626B cleared lysates was significantly improved by the addition of 0.2% (vol/vol) diethylpyrocarbonate (DEP) before protoplast disruption in the cleared lysate protocol. Three previously undetected, large-molecular-mass plasmids (45.2, 51.9, and 68.2 megadaltons) were isolated from modified DEP-treated cleared lysates of C. perfringens 3626B. Two plasmids (9.4 and 30 megadaltons) were recovered from C. perfringens 10543A modified DEP-treated cleared lysates which previously required dye-buoyant density gradient centrifugation for visualization on agarose gels. Unsuccessful attempts to isolate plasmid DNA from Brij 58 cleared lysates of extracellular DNase-negative mutants of C. perfringens suggested the deleterious DNase activity was not extracellular. Cellular localization studies indicated that the cell wall-compartmentalized cell fraction contained 72.2% of the total DNase activity, whereas the extracellular and intracellular fractions demonstrated much less (26.8 and 1.0%, respectively). Cleared lysates prepared with DEP demonstrated much less DNase activity than cleared lysates prepared without DEP. The variable and irreproducible recovery of plasmid DNA from C. perfringens cleared lysates was attributed to cell wall-compartmentalized DNase.     

Isolation of a plasmid responsible for caseinase activity in Clostridium perfringens ATCC 3626B.

Clostridium perfringens strain ATCC 3626B was cured of caseinase activity at a high frequency after treatment with acriflavine dye (2.5%) or elevated temperature growth (9.1%). Caseinase-negative isolates retained the larger (9.4 megadaltons) pHB102 cryptic plasmid, but were missing the smaller (2.1 megadaltons) pHB101 plasmid present in the caseinase-positive wild-type strain. Dye-buoyant density-gradient centrifugation at 4 or 15 degrees C revealed that the pHB101 and pHB102 plasmids are temperature labile and easily converted into the nicked non-supercoiled or linear state.     

Rapid extraction of plasmids from Clostridium perfringens

Two rapid methods were evaluated for their extraction of plasmids from Clostridium perfringens. The first method involved lysis of 1 to 2 ml of C. perfringens culture by treatment with hyaluronidase, lysozyme, and sarcosyl. DNA, extracted with phenol-chloroform, was treated with RNase, boiled, and electrophoresed in a 1.2% agarose gel. The second method involved lysis of 2 ml of culture by lysozyme treatment and extraction with alkaline sodium dodecyl sulfate (SDS). Extracted DNA was treated with RNase, boiled, and electrophoresed in a 0.7% agarose gel. Of 57 strains of C. perfringens analyzed by both extraction procedures, 11 were shown to have plasmids by the alkaline SDS method which were missed by the phenol-chloroform extraction method. These new plasmids were of higher molecular mass and ranged up to 68 megadaltons. Use of the DNase inhibitor diethyl pyrocarbonate did not further improve the yield of plasmid DNA. An additional 159 isolates of C. perfringens screened by the alkaline SDS method revealed plasmids up to 80 megadaltons in mass and an overall plasmid carriage rate of 69%.     

Rapid extraction of plasmids from Clostridium perfringens.

Two rapid methods were evaluated for their extraction of plasmids from Clostridium perfringens. The first method involved lysis of 1 to 2 ml of C. perfringens culture by treatment with hyaluronidase, lysozyme, and sarcosyl. DNA, extracted with phenol-chloroform, was treated with RNase, boiled, and electrophoresed in a 1.2% agarose gel. The second method involved lysis of 2 ml of culture by lysozyme treatment and extraction with alkaline sodium dodecyl sulfate (SDS). Extracted DNA was treated with RNase, boiled, and electrophoresed in a 0.7% agarose gel. Of 57 strains of C. perfringens analyzed by both extraction procedures, 11 were shown to have plasmids by the alkaline SDS method which were missed by the phenol-chloroform extraction method. These new plasmids were of higher molecular mass and ranged up to 68 megadaltons. Use of the DNase inhibitor diethyl pyrocarbonate did not further improve the yield of plasmid DNA. An additional 159 isolates of C. perfringens screened by the alkaline SDS method revealed plasmids up to 80 megadaltons in mass and an overall plasmid carriage rate of 69%.     

Factors involved in the transformation of previously non-transformable Clostridium perfringens type B

Abstract The pre-shock incubation of cells plus DNA and the methylation state of plasmid DNA were found to play a role in the electroporation-based transformation of Clostridium perfringens 3626B. Following pre-shock incubation, the highest number of C. perfringens 3626B transformants was obtained when plasmid pGK201 was both dam⁺ dcm⁺ modified, while no transformants were obtained when pGK201 was not methylated or only dcm methylated. This is consistent with the observation that plasmid pGK201 was protected against digestion by C. perfringens 3626B cell-associated nucleases for up to 3 min when methylated by both methylases. C. perfringens 3626B was successfully transformed only within a narrow cell recovery rate window. The erm AM gene associated with pGK201 and pAK102 was found to integrate into the chromosome of C. perfringens strains 13A and 3626B.     

Improved lysis of group N streptococci for isolation and rapid characterization of plasmid deoxyribonucleic acid.

Procedures for effective cellular lysis and plasmid deoxyribonucleic acid (DNA) isolation from group N streptococci were developed. Cells were grown at 32 degrees C for 4 h in a modified Elliker broth containing 20 mM DL-threonine. After cellular digestion with 2 mg of lysozyme per ml for 7 min at 37 degrees C, 1% sodium dodecyl sulfate exposure resulted in complete and immediate lysis. Lactose (Lac) plasmid species in Streptococcus lactis C2 and S. cremoris B1 (30 and 37 megadaltons, respectively) were demonstrated upon examination of DNA from the cleared lysates by agarose gel electrophoresis. Increasing the lysozyme treatment to 20 min or more resulted in loss of the Lac plasmid, whereas other resident plasmids were unaffected and demonstrable in agarose gels. Diethylpyrocarbonate added before lysis prevented Lac plasmid loss in 20-min lysozyme-treated cells, but was not effective after 40 min of lysozyme treatment. The results suggested that endogenous nuclease activity during the lysozyme treatment period initiated Lac plasmid DNA loss. The development of an efficient lysis procedure for the group N streptococci allowed rapid identification and characterization of plasmid DNA by agarose gel electrophoresis. The plasmid composition of S. lactis C2 and S. cremoris B1, as determined by agarose gel electrophoresis, compared favorably to previous electron microscopic observations.     

Improved lysis of group N streptococci for isolation and rapid characterization of plasmid deoxyribonucleic acid.

Procedures for effective cellular lysis and plasmid deoxyribonucleic acid (DNA) isolation from group N streptococci were developed. Cells were grown at 32 degrees C for 4 h in a modified Elliker broth containing 20 mM DL-threonine. After cellular digestion with 2 mg of lysozyme per ml for 7 min at 37 degrees C, 1% sodium dodecyl sulfate exposure resulted in complete and immediate lysis. Lactose (Lac) plasmid species in Streptococcus lactis C2 and S. cremoris B1 (30 and 37 megadaltons, respectively) were demonstrated upon examination of DNA from the cleared lysates by agarose gel electrophoresis. Increasing the lysozyme treatment to 20 min or more resulted in loss of the Lac plasmid, whereas other resident plasmids were unaffected and demonstrable in agarose gels. Diethylpyrocarbonate added before lysis prevented Lac plasmid loss in 20-min lysozyme-treated cells, but was not effective after 40 min of lysozyme treatment. The results suggested that endogenous nuclease activity during the lysozyme treatment period initiated Lac plasmid DNA loss. The development of an efficient lysis procedure for the group N streptococci allowed rapid identification and characterization of plasmid DNA by agarose gel electrophoresis. The plasmid composition of S. lactis C2 and S. cremoris B1, as determined by agarose gel electrophoresis, compared favorably to previous electron microscopic observations.     

Production of toxin by Clostridium botulinum type A strains cured by plasmids.

Twelve strains of Clostridium botulinum type A and seven strains of Clostridium sporogenes were screened for plasmids by agarose gel electrophoresis of cleared lysates of cells from 5 ml of mid-log-phase culture. Nine type A strains had one or more plasmids of 4.3, 6.8, or 36 megadaltons (MDa); several strains showed a large plasmid of 61 MDa, but it was not consistently recovered. Four C. sporogenes strains had one or more plasmids of 4.3, 5.6 or 36 MDa. Isolates obtained from cultures of plasmid-containing C. botulinum type A strains grown in ionic detergent broth and from spontaneously arising variants were screened both for toxin production and for plasmid content. Toxigenicity of C. botulinum could not be correlated with the presence of any one plasmid.     

Production of toxin by Clostridium botulinum type A strains cured by plasmids

Twelve strains of Clostridium botulinum type A and seven strains of Clostridium sporogenes were screened for plasmids by agarose gel electrophoresis of cleared lysates of cells from 5 ml of mid-log-phase culture. Nine type A strains had one or more plasmids of 4.3, 6.8, or 36 megadaltons (MDa); several strains showed a large plasmid of 61 MDa, but it was not consistently recovered. Four C. sporogenes strains had one or more plasmids of 4.3, 5.6 or 36 MDa. Isolates obtained from cultures of plasmid-containing C. botulinum type A strains grown in ionic detergent broth and from spontaneously arising variants were screened both for toxin production and for plasmid content. Toxigenicity of C. botulinum could not be correlated with the presence of any one plasmid.     

Involvement of a Polyethylene glycol (PEG)-oxidizing Enzyme in the Bacterial Metabolism of PEG

Eighty-seven strains of acetic acid bacteria were surveyed for plasmids by CsCl-ethidium bromide equilibrium centrifugation of cell lysates. Twenty-seven of the 33 strains of Acetobacter were found to harbor plasmid DNA and most strains contained multiple species of low-molecular-weight plasmids. On the other hand, plasmid DNAs were detected in 23 of the 36 strains of Gluconobacter and most of them had molecular weights of more than 5 megadaltons. Of the 18 strains newly isolated from a vinegar factory, some of which were examined taxonomically, 17 contained plasmid DNA. The molecular weights of plasmids detected in this study were in the range of about one to over 17 megadaltons. The plasmids with molecular weights of less than 5 megadaltons were characterized with restriction endonucleases. The physical maps of two plasmids designated as pMV1O1 and pMV102, which were found in the isolated strains, were constructed.     

Plasmid detection in a bacteriocinogenic strain of Clostridium perfringens

Bacteriocinogenic Clostridium perfringens, strain 28, harboured plasmid DNA detectable by dye-bouyant density-gradient centrifugation. This plasmid DNA was absent from an ultraviolet light cured variant which had simultaneously lost its immunity and ability to produce bacteriocin. Agarose gel electrophoresis of the plasmid DNA revealed at least six bands but denaturation experiments suggested three plasmids occurring in more than one conformation. Electron microscopy revealed three major size distributions of circular DNA of molecular weights 1,5,6, and 7.1 megadaltons. Some evidence suggests that the 5.6 megadalton plasmid may control bacteriocin 28 production.     

Factors involved in the electroporation-induced transformation of Clostridium perfringens

The following factors were found to improve the efficiency of transformation of Clostridium perfringens 3624A Rifr Strr: (1) a reduction in cuvette sample volume (DNA and cell suspension) to 0.8 ml, (2) use of a 1 microgram/ml concentration of transforming DNA, (3) use of late-logarithmic phase cells, (4) 3-fold concentration of cell density (3.0 x 10(8) CFU/ml), and (5) a reduction in the pH of the expression and selective plating medium to 6.4. Application of the improved conditions resulted in transformation efficiencies for C. perfringens 3624A Rifr Strr ranging from 7.1 transformants/microgram DNA for plasmic pIP401 to 9.2 x 10(4) transformants per microgram DNA for plasmid pAK201. The greatest transformation efficiency obtained using pAK201 was 9.8 x 10(6) transformants/micrograms DNA for C. perfringens strain 13. Using the improved protocol, pAM beta 1 was transformed at a 42-fold greater level when compared with the values reported earlier [1]. In addition to C. perfringens 3624A Rifr Strr, strains 13, 10543A, 3628C, NTG-4, and 3624A were successfully transformed. Nuclease does not appear to be a factor in the C. perfringens strain-specific electro-transformation protocol.     

Plasmid detection and isolation in strains of Clostridium acetobutylicum and related species

Summary Twenty-one strains of Clostridium acetobutylicum, C. butylicum and Clostridium saccharoperbutylacetonicum were examined. Seven of them contained extrachromosomal DNA molecules, with a size ranging from 2.6 to more than 50 megadaltons. Strain M1 carries a small plasmid of 2.6 megadaltons, AB10 at least one plasmid of 2.6 megadaltons, AB12 one plasmid of 5.2 megadaltons, AB14 and AB16 a plasmid of about 7 megadaltons and a large one of more than 50 megadaltons, AB17 carries at least one plasmid of 6.7 megadaltons and AB18 two plasmids (4–6 megadaltons and 10–12 megadaltons). All of them are cryptic as at present no function can be correlated with their presence in a bacterial strain.     

Shuttle plasmids for Escherichia coli and Clostridium perfringens.

Small plasmids which replicate in both Escherichia coli and Clostridium perfringens were made by recombining E. coli plasmid pBR322 with three different small (less than 4 kilobases) plasmids native to C. perfringens. Subsequently, two homologous, though distinct, tetracycline resistance determinants (tet) from other C. perfringens plasmids were cloned into them. Both tet systems made E. coli resistant to at least 5 micrograms of tetracycline per ml when resident on the shuttle plasmids. The shuttle vectors have been used to transform L-phase variants and autoplasts of C. perfringens. In the latter case, the intact transforming plasmid could be isolated from walled cells after cell wall regeneration. Reciprocal transformation experiments in which plasmid DNAs derived from E. coli or C. perfringens were used suggest that restriction barriers exist between these two organisms. The plasmids contain restriction enzyme recognition sites in locations which are useful for cloning experiments.     

Construction of an Escherichia coli-Clostridium perfringens shuttle vector and plasmid transformation of Clostridium perfringens

A stable shuttle vector which replicates in Escherichia coli and Clostridium perfringens was constructed by ligating a 3.6-kilobase (kb) fragment of plasmid pBR322 with C. perfringens plasmid pHB101 (3.1 kb). The marker for this shuttle plasmid originated from the 1.3-kb chloramphenicol resistance gene of plasmid pHR106. The resulting shuttle vector, designated pAK201, is 8 kb in size and codes for resistance to 20 micrograms of chloramphenicol per ml in both E. coli and C. perfringens. Following shuttle vector construction in E. coli, plasmid pAK201 was transformed into E. coli HB101 and C. perfringens ATCC 3624A, using intact cell electroporation. The transformation frequencies were 10(6) and 10(4) transformants per microgram of DNA in E. coli and C. perfringens, respectively. Restriction enzyme analysis of the chimera isolated from transformants of both microorganisms suggested that the plasmids were identical. Reciprocal transformation experiments in E. coli and C. perfringens indicated no difference in transformation frequency. Plasmid pAK201 was stable in C. perfringens following repeated transfer in the absence of chloramphenicol pressure. The restriction map of plasmid pAK201 shows six unique cut sites which should be useful for future genetic analysis and C. perfringens gene library construction.     

Construction of an Escherichia coli-Clostridium perfringens shuttle vector and plasmid transformation of Clostridium perfringens.

A stable shuttle vector which replicates in Escherichia coli and Clostridium perfringens was constructed by ligating a 3.6-kilobase (kb) fragment of plasmid pBR322 with C. perfringens plasmid pHB101 (3.1 kb). The marker for this shuttle plasmid originated from the 1.3-kb chloramphenicol resistance gene of plasmid pHR106. The resulting shuttle vector, designated pAK201, is 8 kb in size and codes for resistance to 20 micrograms of chloramphenicol per ml in both E. coli and C. perfringens. Following shuttle vector construction in E. coli, plasmid pAK201 was transformed into E. coli HB101 and C. perfringens ATCC 3624A, using intact cell electroporation. The transformation frequencies were 10(6) and 10(4) transformants per microgram of DNA in E. coli and C. perfringens, respectively. Restriction enzyme analysis of the chimera isolated from transformants of both microorganisms suggested that the plasmids were identical. Reciprocal transformation experiments in E. coli and C. perfringens indicated no difference in transformation frequency. Plasmid pAK201 was stable in C. perfringens following repeated transfer in the absence of chloramphenicol pressure. The restriction map of plasmid pAK201 shows six unique cut sites which should be useful for future genetic analysis and C. perfringens gene library construction.     

The murein hydrolase of the bacteriophage phi3626 dual lysis system is active against all tested Clostridium perfringens strains

Clostridium perfringens commonly occurs in food and feed, can produce an enterotoxin frequently implicated in food-borne disease, and has a substantial negative impact on the poultry industry. As a step towards new approaches for control of this organism, we investigated the cell wall lysis system of C. perfringens bacteriophage phi3626, whose dual lysis gene cassette consists of a holin gene and an endolysin gene. Hol3626 has two membrane-spanning domains (MSDs) and is a group II holin. A positively charged beta turn between the two MSDs suggests that both the amino terminus and the carboxy terminus of Hol3626 might be located outside the cell membrane, a very unusual holin topology. Holin function was experimentally demonstrated by using the ability of the holin to complement a deletion of the heterologous phage lambda S holin in lambdadeltaSthf. The endolysin gene ply3626 was cloned in Escherichia coli. However, protein synthesis occurred only when bacteria were supplemented with rare tRNA(Arg) and tRNA(Ile) genes. Formation of inclusion bodies could be avoided by drastically lowering the expression level. Amino-terminal modification by a six-histidine tag did not affect enzyme activity and enabled purification by metal chelate affinity chromatography. Ply3626 has an N-terminal amidase domain and a unique C-terminal portion, which might be responsible for the specific lytic range of the enzyme. All 48 tested strains of C. perfringens were sensitive to the murein hydrolase, whereas other clostridia and bacteria belonging to other genera were generally not affected. This highly specific activity towards C. perfringens might be useful for novel biocontrol measures in food, feed, and complex microbial communities.     

A novel method for rapid isolation of plasmid DNA

A new disposable chromatographic column, pZ523, has been developed for separating plasmid DNA from bacterial chromosomal DNA. Use of pZ523 spun columns eliminates the need for ethidium bromide-cesium chloride density gradients which require long centrifugation times. pZ523 purified plasmids have been shown to be of purity suitable for restriction analysis, ligation, transfection of mammalian cells and transformation of bacteria. Unlike the traditional ultracentrifugation method, pZ523 offers an extremely rapid alternative method for purifying large amounts of plasmid DNA (2.5 mg to 4.5 mg) from cleared bacterial lysates in only 25 minutes.     

The use of cetyltrimethylammonium bromide for the rapid isolation from Staphylococcus aureus of relaxable and non-relaxable plasmid DNA suitable for in vitro manipulation

Plasmid DNA was isolated from Staphylococcus aureus by a rapid method that depends on the precipitation of DNA from cleared lysates by cetyltrimethylammonium bromide at low salt concentrations. The method was validated by its ability to provide DNA for restriction analysis of a highly relaxable plasmid species that is not isolated by more traditional techniques. The DNA can be digested with restriction endonucleases and used for transformation without further purification. The method also provides the basis for analysing staphylococcal plasmids that display a high frequency of deletion after transfer. Simple modifications of the technique allow plasmid DNA to be isolated from other bacteria and the rapid purification of DNA samples before in vitro manipulation.     

Microscale method for rapid isolation of covalently closed circular plasmid DNA from group N streptococci

A method for rapid purification of plasmid DNA from lactic streptococci, utilizing microliter quantities of reagents, was developed by combination of a short lysozyme-mutanolysin cell wall digestion with a modification of the Escherichia coli plasmid isolation procedure of McMaster et al. (Anal. Biochem. 109:47-54, 1980). The preparations obtained were highly enriched for covalently closed circular DNA, and the method was applicable to plasmids of at least 40 megadaltons. Centrifugation in CsCl-ethidium bromide density gradients was not required.