A PCR-based method for isolation of genomic DNA flanking a known DNA sequence

We describe a simple PCR-based method for the isolation of genomic DNA that lies adjacent to a known DNA sequence. The method is based on the directional cloning of digested genomic DNA into the multiple cloning site of a pUC-based plasmid to generate a limited genomic library. The library is plated onto a number of selective LA plates which are incubated overnight, and recombinant plasmid DNA is then isolated from resistant colonies pooled from each plate. PCR amplification is performed on the pooled recombinant plasmid DNAs using primers specific for the pUC vector and the known genomic sequence. The combination of efficient directional cloning and bacterial transformation gives relative enrichment for the genomic sequence of interest and generates a simple DNA template, enabling easy amplification by PCR.     

利用DREAM设计和同源重组进行一步定点突变

目的：建立基于DREAM设计和同源重组的简便、快速定点突变方法。方法：设计两条包含突变的反向PCR（inverse PCR）引物,使其5'端互补从而产生同源重组,同时使用DREAM设计方案在上述引物中引入限制性内切酶位点以便突变子筛选。用能扩增长片段的高保真耐热 DNA聚合酶扩增全长的质粒DNA,直接转化大肠杆菌。转化到细菌中的全长质粒DNA PCR产物可利用其末端同源序列发生同源重组而环化。利用引入的酶切位点方便地进行突变子的筛选。结果：我们用该方法成功地对长度大于7 kb的质粒进行了定点突变。结论：本定点突变无需任何突变试剂盒和特殊的试剂,只需一步反应即可完成;利用DREAM设计使克隆筛选简便可靠,高保真耐热DNA聚合酶可保证多数突变子克隆不发生意外突变,而该酶扩增长片段的能力使该方法适合于大多数质粒不经亚克隆直接突变。     

A general method of site-specific mutagenesis using a modification of the Thermus aquaticus polymerase chain reaction

A specific mutagenic change in the cDNA of human protein S was introduced by a modification of the polymerase chain reaction that permits the introduction of a mutation at any position in a double-stranded DNA molecule. The method employed four synthetic oligonucleotide primers. One oligonucleotide contained a single-base mismatch to direct the mutagenesis; the other three oligonucleotides were designed to allow selective amplification of the mutated sequence with Thermus aquaticus polymerase. The mutagenized cDNA was cloned into a plasmid vector and transformed into Escherichia coli RR1 cells for characterization. The desired cytosine to guanine change in the target cDNA was confirmed by the predicted appearance of an AluI restriction site and by dideoxynucleotide sequencing. No other sequence changes were detected within the amplified region. This method of site-specific mutagenesis can be applied to any linear double-stranded DNA large enough for primer annealing and obviates specialized cloning vectors, DNA constructs, and selection techniques. It has the advantage over a recently published PCR technique (R. Higuchi, B. Krummel, and R. Saki (1988) Nucleic Acids Res. 16, 7351-7367) in requiring no diafiltration to remove primers between steps and in requiring only a single mutagenic oligonucleotide to be synthesized for each mutant construct made after the initial one.     

Sequence specific generation of a DNA panhandle permits PCR amplification of unknown flanking DNA.

We present a novel method for the PCR amplification of unknown DNA that flanks a known segment directly from human genomic DNA. PCR requires that primer annealing sites be present on each end of the DNA segment that is to be amplified. In this method, known DNA is placed on the uncharacterized side of the sequence of interest via DNA polymerase mediated generation of a PCR template that is shaped like a pan with a handle. Generation of this template permits specific amplification of the unknown sequence. Taq (DNA) polymerase was used to form the original template and to generate the PCR product. 2.2 kb of the beta-globin gene, and 657 bp of the 5' flanking region of the cystic fibrosis transmembrane conductance regulator gene, were amplified directly from human genomic DNA using primers that initially flank only one side of the region amplified. This method will provide a powerful tool for acquiring DNA sequence information.     

Molecular cloning of PCR fragments with cohesive ends

Use of the polymerase chain reaction (PCR) provides a convenient means of generating DNA fragments for insertion into plasmids. Large quantities of the desired insert, bounded by convenient restriction sites, may be synthesized. The primers are chosen to span a known region of interest, and extended at their 5′-ends to include the desired restriction sites. Amplification of the target sequence is followed by precipitation of the product with ammonium acetate and ethanol to remove the primers. A small amount of product is analyzed by gel electrophoresis to ensure correct amplification, the remainder is digested with the appropriate restriction enzyme(s). Restricted insert DNA is added to similarly restricted plasmid DNA in several ratios and incubated with DNA ligase to recircularize. Ligation products are used to transform competent bacteria. Clones containing inserts are identified by restriction digestion of plasmid minipreps from bacterial colonies.     

Thermostable DNA Ligase-Mediated PCR Production of Circular Plasmid (PPCP) and Its Application in Directed Evolution via In situ Error-Prone PCR

Polymerase chain reaction (PCR) is a powerful method to produce linear DNA fragments. Here we describe the Tma thermostable DNA ligase-mediated PCR production of circular plasmid (PPCP) and its application in directed evolution via in situ error-prone PCR. In this thermostable DNA ligase-mediated whole-plasmid amplification method, the resultant DNA nick between the 5′ end of the PCR primer and the extended newly synthesized DNA 3′ end of each PCR cycle is ligated by Tma DNA ligase, resulting in circular plasmid DNA product that can be directly transformed. The template plasmid DNA is eliminated by ‘selection marker swapping’ upon transformation. When performed under an error-prone condition with Taq DNA polymerase, PPCP allows one-step construction of mutagenesis libraries based on in situ error-prone PCR so that random mutations are introduced into the target gene without altering the expression vector plasmid. A significant difference between PPCP and previously published methods is that PPCP allows exponential amplification of circular DNA. We used this method to create random mutagenesis libraries of a xylanase gene and two cellulase genes. Screening of these libraries resulted in mutant proteins with desired properties, demonstrating the usefulness of in situ error-prone PPCP for creating random mutagenesis libraries for directed evolution.     

Re-usable DNA template for the polymerase chain reaction.

DNA covalently bound to an uncharged nylon membrane was used for consecutive amplifications of several different genes by PCR. Successful PCR amplifications were obtained for membrane-bound genomic and plasmid DNA. Membrane-bound genomic DNA templates were re-used at least 15 times for PCR with specific amplification of the desired gene each time. PCR amplifications of specific sequences of p53, p16, CYP1A1, CYP2D6, GSTM1 and GSTM3 were performed independently on the same strips of uncharged nylon membrane containing genomic DNA. PCR products were subjected to restriction fragment length polymorphism analysis, single-strand conformational polymorphism analysis and/or dideoxy sequencing to confirm PCR-amplified gene sequences. We found that PCR fragments obtained by amplification from bound genomic DNA as template were identical in sequence to those of PCR products obtained from free genomic DNA in solution. PCR was performed using as little as 5 ng genomic or 4 fg plasmid DNA bound to membrane. These results suggest that DNA covalently bound to membrane can be re-used for sample-specific PCR amplifications, providing a potentially unlimited source of DNA for PCR.     

A noncommercial polymerase chain reaction-based method to approach one hundred percent recombinant clone selection efficiency

Molecular cloning is an important procedure in molecular biology, but this is often a rate-limiting step and can be very time-consuming, possibly due to low ligation efficiency. Here, we describe a simple polymerase chain reaction (PCR)-based strategy to approach 100% selection efficiency. The post-ligation mixture containing the recombinant was subjected to insert-specific primer-mediated PCR amplification using a high-fidelity DNA Pfu polymerase generating a plasmid containing staggered nicks. The PCR mixture was then digested with endonuclease DpnI, which digests the methylated and hemimethylated parental DNA template. The nicked vector was transformed into XL1 blue supercompetent cells where the nicks were repaired, thus amplifying and selecting only the newly amplified recombinant clones.     

Offset recombinant PCR: a simple but effective method for shuffling compact heterologous domains

DNA shuffling and other in vitro recombination strategies have proven highly effective at generating complex libraries for mutagenesis studies. While most recombination techniques employ DNA polymerases in part of a multi-step process, few seek to exploit the natural recombinogenic tendencies and exponential amplification rates of PCR. Here, we characterize a simple but effective method for using standard PCR to promote high recombination frequencies among compact heterologous domains by locating the domains near one end of the template. In a typical amplification reaction, Pfu polymerase generated chimeric crossover events in 13% of the population when markers were separated by only 70 nt. The fraction of recombinant sequences reached 42% after six consecutive rounds of PCR, a value close to the 50% expected from a fully shuffled population. When homology within the recombinant region was reduced to 82%, the recombination frequency dropped by nearly half for a single amplification reaction and crossover events were clustered toward one end of the domain. Surprisingly, recombination frequencies for template populations with high and low sequence homologies converged after just four rounds of PCR, suggesting that the exponential accumulation of chimeric molecules in the PCR mixture serves to promote recombination within heterologous domains.     

New insights into the QuikChangeTM process guide the use of Phusion DNA polymerase for site-directed mutagenesis

The QuikChange^TM site-directed mutagenesis method is popular but imperfect. An improvement by using partially overlapping primers has been reported several times; however, it is incompatible with the proposed mechanism. The QuikChange^TM method using complementary primers is proposed to linearly amplify a target plasmid with the products annealing to produce double-stranded DNA molecules with 5′-overhangs. The overhang annealing is supposed to form circular plasmids with staggered breaks, which can be repaired in Escherichia coli after transformation. Here, we demonstrated that the PCR enzyme fills the 5′-overhangs in the early cycles, and the product is then used as the template for exponential amplification. The linear DNA molecules with homologous ends are joined to generate the plasmid with the desired mutations through homologous recombination in E. coli. The correct understanding is important to method improvements, guiding us to use partially overlapping primers and Phusion DNA polymerase for site-directed mutagenesis. Phusion did not amplify a plasmid with complementary primers but used partially overlapping primers to amplify the plasmid, producing linear DNA molecules with homologous ends for site-directed mutagenesis.     

Highly sensitive and fast detection of Phoma tracheiphila by polymerase chain reaction

Summary A new method for the diagnosis of the plant pathogenic fungus Phoma tracheiphila has been developed. The method takes advantage of the enzymatic amplification of a specific 102 bp-long target sequence of fungal DNA by the polymerase chain reaction (PCR) using Thermus aquaticus DNA polymerase. The amplified DNA was characterized by agarose-gel electrophoresis, molecular hybridization using a synthetic oligonucleotide probe and direct sequencing. The application of the new method makes possible fast and direct detection of the pathogen in lignified plant tissues, a goal not previously achieved when a cloned probe and a dot-blot test were employed. In addition the PCR test can be used to advantage as a particularly simple and fast way of typing fungal isolates. This is achieved by submitting to DNA amplification crude homogenates of fungal mycelium and analysing the amplified DNA on an agarose mini-gel.Offprint requests to: F. Rollo     

New insights into the de novo gene synthesis using the automatic kinetics switch approach

Here we present a simple, highly efficient, universal automatic kinetics switch (AKS) gene synthesis method that enables synthesis of DNA up to 1.6 kbp from 1 nM oligonucleotide with just one polymerase chain reaction (PCR) process. This method eliminates the interference between the PCR assembly and amplification in one-step gene synthesis and simultaneously maximizes the amplification of emerged desired DNA by using a pair of flanked primers. In addition, we describe an analytical model of PCR gene synthesis based on the thermodynamics and kinetics of DNA hybridization. The kinetics difference between standard PCR amplification and one-step PCR gene synthesis is analyzed using this model and is validated using real-time gene synthesis with eight gene segments (318-1656 bp). The effects of oligonucleotide concentration, stringency of annealing temperature, annealing time, extension time, and PCR buffer conditions are examined systematically. Analysis of the experimental results leads to new insights into the gene synthesis process and aids in optimizing gene synthesis conditions. We further extend this method for multiplexing gene assembly with a total DNA length up to 5.74 kbp from 1 nM oligonucleotide.     

Recombinant fragment assay for gene targetting based on the polymerase chain reaction.

The modification of chromosomal genes by homologous recombination between exogenous DNA and a target locus provides a powerful approach to the study of gene function. One of the current limitations of this gene targetting is the difficulty of identifying cells containing the correctly modified target locus when the modified gene is not amenable to either direct or indirect selection. We here describe a procedure for identifying correctly modified cells that depends on amplifying by the polymerase chain reaction (PCR) predictable fragments of DNA present only in the desired recombinants. This recombinant fragment assay can detect targetted modification using only a few cells, either alone or mixed with tens of thousands of unmodified cells; it does not depend on the phenotype of the modified gene, or on its expression in the target cells. The PCR amplification needed for the procedure is carried out with a heat stable polymerase and a simple automatic temperature-shift apparatus which is described.     

From a short amino acidic sequence to the complete gene

A useful strategy directed to the isolation of a required gene with a high GC content is reported. Using a degenerate oligonucleotide probe, deduced from the amino terminus of a protein, it is possible to obtain a fragment of DNA containing its encoding gene by PCR amplification. Furthermore, the cloning of a desired gene can be accomplished in two steps by using an oligonucleotide deduced (i) from an internal sequence, (ii) from a consensus sequence, or (iii) from a DNA sequence adjacent to a disrupting element (transposon, insertion sequence, cassette). This method, which could be applied to a bacteriophage, plasmid, or cosmid genomic library, has been successfully used for cloning several genes from different biological systems.     

Optimization of PCR in application of hot start Taq DNA polymerase for detection of Erwinia amylovora with primers FER1-F and FER1-R

There are two approaches in detection of bacterium Erwinia amylovora by PCR. One is based on detection of plasmid pEA29 and the other is based on detection of a chromosomal DNA sequence, specific for E. amylovora, in a sample. Since pathogenic strains without pEA29 have been isolated from the environment, methods based on this plasmid have been compromised and PCR methods based on chromosomal DNA species specific sequences became only reliable methods. PCR method with chromosomal primers FER1-F and FER1-R is currently the most reliable method due to its high sensitivity and specificity. The goal of this research is to make a significant improvement of the method by optimization of PCR in application of hot start DNA Taq polymerase, instead of wax, to obtain a hot start reaction. This enzyme, which is currently widely applied, can provide simpler achievement of hot start, saving labor and time and decreasing possibility of cross contamination of samples. Experiments showed that simple replacement of a regular recombinant Taq DNA polymerase by a hot start Taq DNA polymerase leads to complete failure of the reaction. Many optimization experiments had to be carried out to obtain an operational and reliable PCR which simultaneously has high sensitivity and specificity. Content of the reaction mixture, as well as temperature and time parameters of PCR, were significantly changed to achieve proper optimization.     

PCR-mediated deletion of plasmid DNA

The PCR-mediated plasmid DNA deletion method is a simple approach to delete DNA sequences from plasmids using only one round of PCR, with two primers, and without ligation or purification prior to in vivo recombination. By using only PCR, the method is sequence independent and, as shown in this study, is applicable to various sizes of plasmids and deletions using minimal primer design.     

A strategy for single site PCR amplification of dsDNA: priming digested cloned or genomic DNA from an anchor-modified restriction site and a short internal sequence

Amplification of dsDNA by polymerase chain reaction (PCR) has been limited to those instances in which segments of known sequence flank the fragment to be amplified. A strategy for the PCR amplification of cloned or genomic dsDNA that necessitates sequence information from only a single short segment (single site PCR) has been devised. The region of known sequence may be located at any position within or adjacent to the segment to be amplified. The basic procedure for amplification consists of 1) digestion of dsDNA with one or more restriction enzymes, 2) ligation with a universal anchor adaptor and 3) PCR amplification using an anchor primer and the primer for the single site of known sequence. The anchor adaptor is designed in such a way as to facilitate the amplification of only those fragments containing the sequence of interest. We have demonstrated the utility of this technique by specifically amplifying and directly sequencing antibody variable region genes from cloned dsDNA and from genomic DNA.