Electrostatically balanced subnanometer imaging of biological specimens by atomic force microscope.

To achieve high-resolution topographs of native biological macromolecules in aqueous solution with the atomic force microscope (AFM) interactions between AFM tip and sample need to be considered. Short-range forces produce the submolecular information of high-resolution topographs. In contrast, no significant high-resolution information is provided by the long-range electrostatic double-layer force. However, this force can be adjusted by pH and electrolytes to distribute the force applied to the AFM tip over a large sample area. As demonstrated on fragile biological samples, adjustment of the electrolyte solution results in a local reduction of both vertical and lateral forces between the AFM tip and proteinous substructures. Under such electrostatically balanced conditions, the deformation of the native protein is minimized and the sample surface can be reproducibly contoured at a lateral resolution of 0.6 nm.     

AFM for structure and dynamics of biomembranes

We review structure and dynamic measurements of biomembranes by atomic force microscopy (AFM). We focus mainly on studies involving supported lipid bilayers (SLBs), particularly formation by vesicle rupture on flat and corrugated surfaces, nucleation and growth of domains in phase-separated systems, anesthetic-lipid interactions, and protein/peptide interactions in multicomponent systems. We show that carefully designed experiments along with real-time AFM imaging with superior lateral and z resolution (0.1 nm) have revealed quantitative details of the mechanisms and factors controlling vesicle rupture, domain shape and size, phase transformations, and some model biological interactions. The AFM tip can also be used as a mechanical transducer and incorporated in electrochemical measurements of membrane components; therefore, we touch on these important applications in both model and cell membranes.     

Atomic force microscopy: from cell imaging to molecular manipulation

The atomic force microscope (AFM) allows to explore the surface of biological samples bathed in physiological solutions, with vertical and horizontal resolutions ranging from nanometers to angstr?ms. Complex biological structures as well as single molecules can be observed and recent examples of the possibilities offered by the AFM in the imaging of intact cells, isolated membranes, membrane model systems and single molecules are discussed in this review. Applications where the AFM tip is used as a nanotool to manipulate biomolecules and to determine intra and intermolecular forces from single molecules are also presented.     

AFM for structure and dynamics of biomembranes

We review structure and dynamic measurements of biomembranes by atomic force microscopy (AFM). We focus mainly on studies involving supported lipid bilayers (SLBs), particularly formation by vesicle rupture on flat and corrugated surfaces, nucleation and growth of domains in phase-separated systems, anesthetic-lipid interactions, and protein/peptide interactions in multicomponent systems. We show that carefully designed experiments along with real-time AFM imaging with superior lateral and z resolution (0.1 nm) have revealed quantitative details of the mechanisms and factors controlling vesicle rupture, domain shape and size, phase transformations, and some model biological interactions. The AFM tip can also be used as a mechanical transducer and incorporated in electrochemical measurements of membrane components; therefore, we touch on these important applications in both model and cell membranes.     

Atomic force microscopy: from cellular imaging to molecular manipulation

Using a sharp tip attached at the end of a soft cantilever as a probe, the atomic force microscope (AFM) explores the surface topography of biological samples bathed in physiological solutions. In the last few years, the AFM has gained popularity among biologists. This has been obtained through the improvement of the equipment and imaging techniques as well as through the development of new non-imaging applications. Biological imaging has to face a main difficulty that is the softness and the dynamics of most biological materials. Progress in understanding the AFM tip-biological samples interactions provided spectacular results in different biological fields. Recent examples of the possibilities offered by the AFM in the imaging of intact cells, isolated membranes, membrane model systems and single molecules at work are discussed in this review. Applications where the AFM tip is used as a nanotool to manipulate biomolecules and to determine intra- and intermolecular forces from single molecules are also presented.     

AFM: a nanotool in membrane biology

Cellular membranes are vital for life. They confine cells and cytosolic compartments and are involved in virtually every cellular process. Cellular membranes form cellular contacts and focal adhesions, anchor the cytoskeleton, generate energy gradients, transform energy, transduce signals, move cells, and actively form compartments to assemble different membrane proteins into functional entities. But how do cellular membranes perform these tasks? What do the machineries of cellular membranes look like, and how are they controlled and guided? Atomic force microscopy (AFM) allows the observation of biological surfaces in their native environment at a signal-to-noise ratio superior to that of any optical microscopic technique. With a spatial resolution approaching approximately 1 nm, AFM can identify the supramolecular assemblies, characteristic structure, and functional conformation of native membrane proteins. In recent years, AFM has evolved from imaging applications to a multifunctional "laboratory on a tip" that allows observation and manipulation of the machineries of cellular membranes. In the force spectroscopy mode, AFM detects interactions between two single cells at molecular resolution. Force spectroscopy can also be used to probe the local elasticity, chemical groups, and receptor sites of live cells. Other applications locate molecular interactions driving membrane protein folding, assembly, and their switching between functional states. It is also possible to examine the energy landscape of biomolecular reactions, as well as reaction pathways, associated lifetimes, and free energy. In this review, we provide a flavor of the fascinating opportunities offered by the use of AFM as a nanobiotechnological tool in modern membrane biology.     

Synthesis and characterization of a photocleavable cross-linker and its application on tunable surface modification and protein photodelivery

A heterobifunctional photocleavable cross-linker based on an o-nitrobenzyl ester moiety was synthesized. The cross-linker has N-hydroxysuccinimidyl and disulfide groups attached at each end and thus can anchor a protein to a gold-coated substrate surface. Steady-state spectroscopic studies suggest that the cross-linker undergoes a clean C-O fragmentation upon irradiation with a quantum yield of 0.1. Consequently, immobilized proteins (such as avidin or antibodies) on a substrate surface can be released efficiently (>95%) under UV irradiation (lambda > 300 nm) without degrading the protein functionality. We also demonstrated protein delivery via bioconjugation of protein molecules to a gold-coated atomic-force microscope (AFM) tip. When the proteins are photoreleased from the AFM tip, they are delivered to the substrate surface as protein clusters of uniform size. This has been confirmed using both AFM and fluorescence microscopy. The application of bioconjugation in this study opens a new avenue for tunable surface modification and controllable protein delivery in studies of biological systems on the nanometer scale.     

Preparation and applications of biofunctionalized,supported lipid bilayers and vesicles

Biofunctional surfaces require advanced design and preparation to match the (bio)recognition ability of biological systems [1]. This requires combined topographic, chemical and visco-elastic surface patterns to match proteins at the nm scale and cells at the micrometer scale. One example of biochemical functionalization, presented here, and which is of both fundamental and application interest, is supported biomimectic (cell)membranes. Specifically we describe preparation and applications of supported phospholipid membranes, which can be made on certain surfaces from unilamellar, 25–200 nm vesicles. On SiO2 at normal pH and with neutral lipids, the vesicles first adsorb intact, and then undergo a phase transformation to a supported bilayer. We have studied the coverage-, vesicle size-, and T-dependence of this process [2], using QCM-D [3], AFM, and SPR. When SiO2 is replaced by TiO2, vesicles adsorb intact. A surface pre-covered with intact vesicles, can be AFM patterned into areas with bilayer, vesicles, and empty surface patches [4]. The results depend critically on AFM tip interaction with vesicle and bilayer, which has been modeled by Monte Carlo simulations [5]. These biomembranes are inert towards protein adsorption [6] and cell attachement [7], which opens up for various applications. Addition of functional molecules, allows sensor functions [8]. Another application is functionalized membranes for surface-specific (stem) cell interactions [9].     

Adhesively-tensed cell membranes: lysis kinetics and atomic force microscopy probing

Membrane tension underlies a range of cell physiological processes. Strong adhesion of the simple red cell is used as a simple model of a spread cell with a finite membrane tension-a state which proves useful for studies of both membrane rupture kinetics and atomic force microscopy (AFM) probing of native structure. In agreement with theories of strong adhesion, the cell takes the form of a spherical cap on a substrate densely coated with poly-L-lysine. The spreading-induced tension, sigma, in the membrane is approximately 1 mN/m, which leads to rupture over many minutes; and sigma is estimated from comparable rupture times in separate micropipette aspiration experiments. Under the sharpened tip of an AFM probe, nano-Newton impingement forces (10-30 nN) are needed to penetrate the tensed erythrocyte membrane, and these forces increase exponentially with tip velocity ( approximately nm/ms). We use the results to clarify how tapping-mode AFM imaging works at high enough tip velocities to avoid rupturing the membrane while progressively compressing it to a approximately 20-nm steric core of lipid and protein. We also demonstrate novel, reproducible AFM imaging of tension-supported membranes in physiological buffer, and we describe a stable, distended network consistent with the spectrin cytoskeleton. Additionally, slow retraction of the AFM tip from the tensed membrane yields tether-extended, multipeak sawtooth patterns of average force approximately 200 pN. In sum we show how adhesive tensioning of the red cell can be used to gain novel insights into native membrane dynamics and structure.     

Combined nanomanipulation by atomic force microscopy and UV-laser ablation for chromosomal dissection

Nanomanipulation and nanoextraction on a scale close to and beyond the resolution limit of light microscopy is needed for many modern applications in biological research. For the manipulation of biological specimens a combined microscope allowing for ultraviolet (UV) microbeam laser manipulation together with manipulation by an atomic force microscope (AFM) was used. In a one-step procedure, human metaphase chromosomes were dissected optically by the UV-laser ablation and mechanically by AFM manipulation. With both methods, sub-400-nm cuts could be achieved routinely. Thus, the AFM is an indispensable tool for in situ quality control of nanomanipulation. However, already on this scale the dilation of the topographic AFM image due to the tip geometry can become significant. Therefore the AFM images were restored using a tip geometry obtained by a blind tip-reconstruction algorithm. Cross-sectional analysis of the restored image reveals a 380-nm-wide UV-laser cut and AFM cuts between 70 nm and 280 nm.     

Imaging biological structures with the cryo atomic force microscope.

It has long been recognized that one of the major limitations in biological atomic force microscopy (AFM) is the softness of most biological samples, which are easily deformed or damaged by the AFM tip, because of the high pressure in the contact area, especially from the very sharp tips required for high resolution. Another is the molecular motion present at room temperature due to thermal fluctuation. Using an AFM operated in liquid nitrogen vapor (cryo-AFM), we demonstrate that cryo-AFM can be applied to a large variety of biological samples, from immunoglobulins to DNA to cell surfaces. The resolution achieved with cryo-AFM is much improved when compared with AFM at room temperature with similar specimens, and is comparable to that of cryo-electron microscopy on randomly oriented macromolecules. We will also discuss the technical problems that remain to be solved for achieving even higher resolution with cryo-AFM and other possible applications of this novel technique.     

Single Protein Molecule Mapping with Magnetic Atomic Force Microscopy

Understanding the structural organization and distribution of proteins in biological cells is of fundamental importance in biomedical research. The use of conventional fluorescent microscopy for this purpose is limited due to its relatively low spatial resolution compared to the size of a single protein molecule. Atomic force microscopy (AFM), on the other hand, allows one to achieve single-protein resolution by scanning the cell surface using a specialized ligand-coated AFM tip. However, because this method relies on short-range interactions, it is limited to the detection of binding sites that are directly accessible to the AFM tip. We developed a method based on magnetic (long-range) interactions and applied it to investigate the structural organization and distribution of endothelin receptors on the surface of smooth muscle cells. Endothelin receptors were labeled with 50-nm superparamagnetic microbeads and then imaged with magnetic AFM. Considering its high spatial resolution and ability to “see” magnetically labeled proteins at a distance of up to 150 nm, this approach may become an important tool for investigating the dynamics of individual proteins both on the cell membrane and in the submembrane space.     

原子力显微镜对纳米生物结构的观察和操纵

原子力显微镜不仅能对纳米生物结构进行观察,而且也能对其进行操纵。对纳米生物结构的观察已深入到生物大分子结构水平。原子力显微镜对生物大分子的操纵包括从染色质中提取DNA用于基因分析、对膜蛋白的结构进行观察、对蛋白构象进行可控操纵等。这些纳米技术的应用将揭示生物系统更多的结构和功能信息。     

FM-AFM constant height imaging and force curves: high resolution study of DNA-tip interactions

Interaction of the atomic force microscopy (AFM) tip with the sample can be invasive for soft samples. Frequency Modulation (FM) AFM is gentler because it allows scanning in the non‐contact regime where only attractive forces exist between the tip and the sample, and there is no sample compression. Recently, FM‐AFM was used to resolve the atomic structure of single molecules of pentacene and of carbon nanotubes. We are testing similar FM‐AFM‐based approaches to study biological samples. We present FM‐AFM experiments on dsDNA deposited on 3‐aminopropyltriethoxysilane modified mica in ultra high vacuum. With flexible samples such as DNA, the substrate flatness is a sub‐molecular resolution limiting factor. Non‐contact topographic images of DNA show variations that have the periodicity of the right handed helix of B‐form DNA – this is an unexpected result as dehydrated DNA is thought to assume the A‐form structure. Frequency shift maps at constant height allow working in the non‐monotonic frequency shift range, show a rich contrast that changes significantly with the tip‐sample separation, and show 0.2 to 0.4 nm size details on DNA. Frequency shift versus distance curves acquired on DNA molecules and converted in force curves show that for small molecules (height < 2.5 nm), there is a contribution to the interaction force from the substrate when the tip is on top of the molecules. Our data shine a new light on dehydrated and adsorbed DNA behavior. They show a longer tip‐sample interaction distance. These experiments may have an impact on nanotechnological DNA applications in non‐physiological environments such as DNA based nanoelectronics and nanotemplating. Copyright © 2012 John Wiley & Sons, Ltd.     

Probing membrane proteins using atomic force microscopy

To gain insights into how biological molecules function, advanced technologies enabling imaging, sensing, and actuating single molecules are required. The atomic force microscope (AFM) would be one of novel potential tools for these tasks. In this study, techniques and efforts using AFM to probe biomolecules are introduced and reviewed. The state-of-art techniques for characterizing specific single receptor using the functionalized AFM tip are discussed. An example of studying the angiotensin II type 1 (AT1) receptors expressed in sensory neuronal cells by AFM with a functionalized tip is given. Perspectives for identifying and characterizing specific individual membrane proteins using AFM in living cells are provided. Given that many diseases have their roots at the molecular scale and are best understood as a malfunctioning biological nanomachines, the prospects of these unique techniques in basic biomedical research or in clinical practice are beyond our imagination.     

肌动蛋白的原子力显微镜研究

原子力显微镜 (AFM )是一种能够在生理条件下对生物大分子、活细胞表面以及细胞膜下结构进行在体或离体研究的强有力的新型工具 ,具有原子级的成像分辨率和纳牛顿级的力测定功能。目前原子力显微镜已被广泛地应用于生物大分子、超分子体系的结构解析、动力学过程观察 ,分子力学研究及细胞功能鉴定。原子力显微镜能够通过尖锐探针扫描待测样品表面 ,收集被测样品表面地貌坐标数据从而对单分子或细胞进行成像或操作 ,并能通过移动探针、记录探针与样品之间的作用力 ,对生物大分子 (蛋白质、核酸和多糖等 )的结构力学特性进行分析以获取分子构象、功能及其相互关系的有用信息。肌动蛋白是一种细胞内普遍存在 ,具有广泛、复杂生理功能的重要蛋白质 ,原子力显微镜的各项功能已广泛地用于肌动蛋白结构、功能及动力学研究。通过综述原子力显微镜在肌动蛋白研究中的应用 ,阐明了原子力显微镜在现代生命科学研究中的重要意义及巨大应用前景。     

Direct immobilization of avidin protein on AFM tip functionalized by acrylic acid vapor at RF plasma

The atomic force microscopy (AFM) has been used as a force sensor to measure unbinding forces of single bound complexes in the nanonewton and piconewton range. Force spectroscopy measurements can be applied to study both intermolecular and intramolecular interactions of complex biological and synthetic macromolecules. Although the AFM has been extensively used as a nano force sensor, the commercially available cantilever is limited to silicon and silicon nitride. Those materials reduce the adhesion sensitivity with specific surface and/or molecule. Here, we functionalized the AFM tip with carboxylic groups by applying acrylic acid (AA) vapor at radio frequency plasma treatment at 100 W for 5 min. This method provides a remarkable sensitivity enhancement on the functional group interaction specificity. The functionalized tip was characterized by scanning electron microscopy. The electron beam high resolution images have not shown significant tip sharpness modification. Silicon wafers (1 0 0)-no treated and functionalized by AA plasma treatment-were characterized by Auger electron spectroscopy to elucidate the silicon surface sputtering and demonstrate functionalization. The Fourier transform-infrared spectroscopy spectrum shows a high absorbance of avidin protein over the silicon surface functionalized by AA plasma treatment.We carried out force spectroscopy assay to measure the unbinding force between the well-established pair biotin-avidin. At pulling speed of 2 μm/s, we measured the unbinding force of 106?±?23 pN, which is in good agreement with the literature, demonstrating the effectiveness of the tip functionalization by AA plasma treatment in biological studies.     

A general and efficient cantilever functionalization technique for AFM molecular recognition studies

Atomic force microscopy (AFM) is a versatile technique for the investigation of noncovalent molecular associations between ligand–substrate pairs. Surface modification of silicon nitride AFM cantilevers is most commonly achieved using organic trialkoxysilanes. However, susceptibility of the Si? O bond to hydrolysis and formation of polymeric aggregates diminishes attractiveness of this method for AFM studies. Attachment techniques that facilitate immobilization of a wide variety of organic and biological molecules via the stable Si? C bond on silicon nitride cantilevers would be of great value to the field of molecular recognition force spectroscopy. Here, we report (1) the formation of stable, highly oriented monolayers on the tip of silicon nitride cantilevers and (2) demonstrate their utility in the investigation of noncovalent protein–ligand interactions using molecular recognition force spectroscopy. The monolayers are formed through hydrosilylation of hydrogen‐terminated silicon nitride AFM probes using a protected α‐amino‐ω‐alkene. This approach facilitates the subsequent conjugation of biomolecules. The resulting biomolecules are bound to the tip by a strong Si? C bond, completely uniform with regard to both epitope density and substrate orientation, and highly suitable for force microscopy studies. We show that this attachment technique can be used to measure the unbinding profiles of tip‐immobilized lactose and surface‐immobilized galectin‐3. Overall, the proposed technique is general, operationally simple, and can be expanded to anchor a wide variety of epitopes to a silicon nitride cantilever using a stable Si? C bond. © 2012 Wiley Periodicals, Inc. Biopolymers 97: 761–765, 2012.     

Mapping HA‐tagged protein at the surface of living cells by atomic force microscopy

Single‐molecule force spectroscopy using atomic force microscopy (AFM) is more and more used to detect and map receptors, enzymes, adhesins, or any other molecules at the surface of living cells. To be specific, this technique requires antibodies or ligands covalently attached to the AFM tip that can specifically interact with the protein of interest. Unfortunately, specific antibodies are usually lacking (low affinity and specificity) or are expensive to produce (monoclonal antibodies). An alternative strategy is to tag the protein of interest with a peptide that can be recognized with high specificity and affinity with commercially available antibodies. In this context, we chose to work with the human influenza hemagglutinin (HA) tag (YPYDVPDYA) and labeled two proteins: covalently linked cell wall protein 12 (Ccw12) involved in cell wall remodeling in the yeast Saccharomyces cerevisiae and the β2‐adrenergic receptor (β2‐AR), a G protein‐coupled receptor (GPCR) in higher eukaryotes. We first described the interaction between HA antibodies, immobilized on AFM tips, and HA epitopes, immobilized on epoxy glass slides. Using our system, we then investigated the distribution of Ccw12 proteins over the cell surface of the yeast S. cerevisiae. We were able to find the tagged protein on the surface of mating yeasts, at the tip of the mating projections. Finally, we could unfold multimers of β2‐AR from the membrane of living transfected chinese hamster ovary cells. This result is in agreement with GPCR oligomerization in living cell membranes and opens the door to the study of the influence of GPCR ligands on the oligomerization process. Copyright © 2014 John Wiley & Sons, Ltd.     

Linking of sensor molecules with amino groups to amino-functionalized AFM tips

The measuring tip of an atomic force microscope (AFM) can be upgraded to a specific biosensor by attaching one or a few biomolecules to the apex of the tip. The biofunctionalized tip is then used to map cognate target molecules on a sample surface or to study biophysical parameters of interaction with the target molecules. The functionality of tip-bound sensor molecules is greatly enhanced if they are linked via a thin, flexible polymer chain. In a typical scheme of tip functionalization, reactive groups are first generated on the tip surface, a bifunctional cross-linker is then attached with one of its two reactive ends, and finally the probe molecule of interest is coupled to the free end of the cross-linker. Unfortunately, the most popular functional group generated on the tip surface is the amino group, while at the same time, the only useful coupling functions of many biomolecules (such as antibodies) are also NH(2) groups. In the past, various tricks or detours were applied to minimize the undesired bivalent reaction of bifunctional linkers with adjacent NH(2) groups on the tip surface. In the present study, an uncompromising solution to this problem was found with the help of a new cross-linker ("acetal-PEG-NHS") which possesses one activated carboxyl group and one acetal-protected benzaldehyde function. The activated carboxyl ensures rapid unilateral attachment to the amino-functionalized tip, and only then is the terminal acetal group converted into the amino-reactive benzaldehyde function by mild treatment (1% citric acid, 1-10 min) which does not harm the AFM tip. As an exception, AFM tips with magnetic coating become demagnetized in 1% citric acid. This problem was solved by deprotecting the acetal group before coupling the PEG linker to the AFM tip. Bivalent binding of the corresponding linker ("aldehyde-PEG-NHS") to adjacent NH(2) groups on the tip was largely suppressed by high linker concentrations. In this way, magnetic AFM tips could be functionalized with an ethylene diamine derivative of ATP which showed specific interaction with mitochondrial uncoupling protein 1 (UCP1) that had been purified and reconstituted in a mica-supported planar lipid bilayer.