Chromatographic methods for characterization of poly(ethylene glycol)-modified polyamidoamine dendrimers

The objective of this study was to develop chromatographic methods for the determination of the modification degree and the characterization of poly(ethylene glycol)-modified polyamidoamine dendrimers (PEG–PAMAMs). The PEG–PAMAMs were prepared by reacting PAMAM generation 4 with monomethoxy PEG–nitrophenyl carbonate (mPEG–NPC). The modification degrees of PEG–PAMAMs were determined by quantifying 4-nitrophenol released from mPEG–NPC after PEGylation reaction using high-performance liquid chromatography (HPLC) with ultraviolet (UV) detection. The PEG–PAMAMs, which have poor UV absorbances, were characterized by HPLC with charged aerosol detection. This study demonstrates that the combination of these two detectors is a powerful tool for the preparation and characterization of PEG–PAMAMs.     

Preparation and stability of poly(ethylene glycol) (PEG)ylated octreotide for application to microsphere delivery

The purpose of this study was to prepare poly(ethylene glycol) (PEG)ylated octreotide and investigate the stability against acylation by polyester polymers such as poly(lactic acid) and poly(lactic-co-glycolic acid). Octreotide was modified by reaction with monomethoxy PEG-propionaldehyde (molecular weight 5,000) in the presence of sodium cyanoborohydride. The mono-PEGylated fraction was isolated by reverse-phase high-performance liquid chromatography (HPLC) and characterized by matrixassisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). Circular dichroism demonstrated no significant secondary structural differences between mono-PEGylated octreotide (mono-PEG-octreotide) and intact octreotide. As a test system for the stability study against acylation reaction, lactic acid (LA) solutions with various concentrations and pH values were prepared with water dilution and subsequent accelerated equilibration at 90°C for 24 hours. Native octreotide was found to be acylated in all the diluted LA solutions with different concentrations (42.5%, 21.3%, and 8.5%, wt/wt) and pH values (2.25, 1.47, and 1.85, respectively). The remaining amounts of intact octreotide continuously decreased to 50% through 30 days of incubation at 37°C. MALDI-TOF MS identified the octreotide to be acylated by LA units. However, acylation reaction of mono-PEG-octreotide in LA solutions was negligible, and the remaining amounts of intact one through 30 days of incubation in LA solutions were also comparable to the initial concentration. These data suggest that mono-PEG-octreotide may prevent the acylation reaction in degrading PLA microspheres and possibly serve as a new source for somatostatin microsphere formulation.     

Antibacterial activities of poly(amidoamine) dendrimers terminated with amino and poly(ethylene glycol) groups

Poly(amidoamine) (PAMAM) dendrimer derivatives have been investigated for their biological applications, especially for delivery of drugs, including antimicrobial drugs to eukaryotic cells, but their effects on bacterial cells are largely unexplored. Herein we report that amino-terminated PAMAM dendrimers are highly toxic to the common Gram-negative pathogen Pseudomonas aeruginosa. The concentration that kills 50% of the bacteria (EC50) was in the range of approximately 0.9-1.5 microg/mL for the generation 5, amino-terminated dendrimers with or without partial (43%) coating of poly(ethylene glycol) (PEG). These EC50 values were lower than that ( approximately 1.9-2.8 microg/mL) for LL-37, a potent antimicrobial peptide expressed in a variety of epithelia. On the contrary, the dendrimers were far less toxic (EC50 > 21 microg/mL) to the Gram-positive pathogen Staphylococcus aureus than LL-37 (EC50 = approximately 1.9 microg/mL). In agreement with the previous studies on other cell types, the dendrimers were not cytotoxic to human corneal epithelial cells at the concentrations that were toxic to P. aeruginosa. Our findings indicate that amino-terminated PAMAM dendrimers and their partially PEG-coated derivatives possess attractive antimicrobial properties, particularly against Gram-negative bacteria, thus expanding the potential biological application of the dendrimers.     

Aqueous solubilization of fullerenes using poly(amidoamine) dendrimers bearing cyclodextrin and poly(ethylene glycol)

Fullerene has a unique structure and notable chemical and physical properties, which have been studied in diverse fields including biological applications. The extremely poor solubility of fullerenes in water limits their usage for biomedical applications. In this study, we synthesized polyamidoamine dendrimers having both beta-cyclodextrin (CD) and poly(ethylene glycol) (PEG) and characterized the resulting dendrimers by (1)H NMR, IR, and gel permeation chromatography. We prepared 2.8 microM of aqueous fullerene solutions using these dendrimers. The clustering effect of CD and PEG at the surface of the dendrimer might be crucial for the solubilization of fullerene.     

Synthesis of polyamidoamine dendrimers having poly(ethylene glycol) grafts and their ability to encapsulate anticancer drugs

Polyamidoamine dendrimers having poly(ethylene glycol) grafts were designed as a novel drug carrier which possesses an interior for the encapsulation of drugs and a biocompatible surface. Poly(ethylene glycol) monomethyl ether with the average molecular weight of 550 or 2000 was combined to essentially every chain end of the dendrimer of the third or fourth generation via urethane bond. The poly(ethylene glycol)-attached dendrimers encapsulating anticancer drugs, adriamycin and methotrexate, were prepared by extraction with chloroform from mixtures of the poly(ethylene glycol)-attached dendrimers and varying amounts of the drugs. Their ability to encapsulate these drugs increased with increasing dendrimer generation and chain length of poly(ethylene glycol) grafts. Among the poly(ethylene glycol)-attached dendrimers prepared, the highest ability was achieved by the dendrimer of the fourth generation having the poly(ethylene glycol) grafts with the average molecular weight of 2000, which could retain 6.5 adriamycin molecules or 26 methotrexate molecules/dendrimer molecule. The methotrexate-loaded poly(ethylene glycol)-attached dendrimers released the drug slowly in an aqueous solution of low ionic strength. However, in isotonic solutions, methotrexate and adriamycin were readily released from the poly(ethylene glycol)-attached dendrimers.     

UV-patterned poly(ethylene glycol) matrix for microarray applications

A versatile method to fabricate polymeric matrixes for microarray applications is demonstrated. Several different design strategies are presented where a variety of organic films, such as plastic polymers and self-assembled monolayers (SAMs) on planar silica and gold substrates, act as supports for the graft polymerization procedure. An ensemble of poly(ethylene glycol) methacrylate monomers are combined to obtain a matrix with desired properties: low nonspecific binding and easily accessible groups for postimmobilization of ligands. The free radical graft polymerization process occurs under irradiation with UV light in the 254-266 nm range, which offers the possibility to introduce patterns by means of a photomask. The arrays are created on inert and homogeneous coatings prepared either by graft polymerization of a methoxy-terminated PEG-methacrylate or self-assembly of a methoxy-terminated oligo(ethylene glycol) thiol. Carboxylic acid groups, introduced in the array spots either during graft polymerization or upon wet chemical conversion of hydroxyls, grant the capability to immobilize proteins and other molecules via free amine groups. Immobilization of fluorescent species as well as biotin followed by exposure to a fluorescently labeled antibody directed toward biotin display both excellent integrity of the spots and low nonspecific binding to the surrounding framework. Beside patterns of uniform height and size, an array of spots with varying thickness (a sort of gradient) is demonstrated. Such gradient samples enable us to address critical issues regarding the mechanism(s) behind spatially resolved free radical polymerization of methacrylates. It also offers a convenient route to optimize the matrix properties with respect to thickness, loading capacity, protein diffusion/penetration, and nonspecific binding.     

Novel 3,6-bis(imidazolidine)acridines as effective photosensitizers for photodynamic therapy

The photoeffect of new proflavine derivatives with DNA-binding and antitumour activities, 3,6-bis((1-alkyl-5-oxo-imidazolidin-2-yliden)imino)acridine hydrochlorides (AcrDIMs), was studied to evaluate them as potential photosensitizers for photodynamic antitumor therapy. EPR measurements showed that superoxide radical anion and singlet oxygen were produced upon irradiation of AcrDIMs with UV-A light (>300 nm) in the presence of molecular oxygen. This indicates that AcrDIMs may act as photosensitizers. The most active pentyl-AcrDIM and hexyl-AcrDIM displayed photocytotoxic effect toward the mouse lymphocytic leukemia cell line L1210 and human ovarian cancer cells A2780. Antitumor activity of pentyl-AcrDIM increased as high as about 12 times (72 h incubation) after irradiation of A2780 cells (365 nm, 1.05 J/cm²). The photocytotoxicity seems to be associated with oxidative stress. Concerning the cell cycle, flow cytometry showed an arrest in the S-phase already 4 h after irradiation. In a comet assay, no genotoxicity of AcrDIMs was found. Typical morphologic changes and formation of DNA-ladders indicated induction of apoptotic cell death, though no activation of caspase-3 was observed. Investigation of intracellular localization of pentyl-AcrDIM confirmed its partial accumulation in mitochondria and lysosomes. After irradiation of the A2780 cells, colocalization of pentyl-AcrDIM with monodansylcadaverine, a lysosomal dye, was proven, suggesting that lysosomes in the irradiated cells may be involved in the cell death.     

Preparation of poly(ethylene glycol) protected nanoparticles with variable bioconjugate ligand density

Maleimide-functional poly(ethylene glycol)-b-poly(epsilon-caprolactone) nanoparticles (NPs) were prepared via the Flash NanoPrecipitation technique. Subsequent reaction with a model ligand, bovine serum albumin (BSA), was conducted using thiol-maleimide conjugation. Reaction of up to 22% of NP surface maleimide-PEG tethers was obtained, with the percent conversion being essentially independent of the ratio of maleimide-PEG to methyl-PEG over the range 30-100%, respectively. At the highest surface coverage, BSA is calculated to essentially cover the NP surface area. Reaction parameters (reaction order and docking constant) describing the extent of ligand conjugation were determined. The reaction order is applicable to the conjugation of ligands presenting free thiol functionalities, while the value of the docking constant is ligand-dependent and accounts for physical and dynamic properties of the ligand-PEG interaction. Jointly, the particle formation process, using block copolymer-directed kinetically controlled assembly and surface functionalization represent a versatile new platform for the preparation of bioconjugated NPs with accurate control of ligand density and minimal processing steps.     

Synthesis of oligo(poly(ethylene glycol) fumarate)

This protocol describes the synthesis of oligo(poly(ethylene glycol) fumarate) (OPF; 1-35 kDa; a polymer useful for tissue engineering applications) by a one-pot reaction of poly(ethylene glycol) (PEG) and fumaryl chloride. The procedure involves three parts: dichloromethane and PEG are first dried; the reaction step follows, in which fumaryl chloride and triethylamine are added dropwise to a solution of PEG in dichloromethane; and finally, the product solution is filtered to remove by-product salt, and the OPF product is twice crystallized, washed and dried under vacuum. The reaction is affected by the molecular weight of PEG and reactant molar ratio. The OPF product is cross-linked by radical polymerization by either a thermally induced or ultraviolet-induced radical initiator, and the physical properties of the OPF oligomer and resulting cross-linked hydrogel are easily tailored by varying PEG molecular weight. OPF hydrogels are injectable, they polymerize in situ and they undergo biodegradation by hydrolysis of ester bonds. The expected time required to complete this protocol is 6 d.     

Preparation and spectroscopic characterization of methoxy poly(ethylene glycol)-grafted water-soluble chitosan

The object of this study was to test the solubility of a methoxy poly(ethylene glycol) (MPEG)-grafted chitosan copolymer in organic solvents and aqueous solution. Water-soluble chitosan with low molecular weight (LMWSC) was used in a PEG-graft copolymerization. The MPEG was conjugated to chitosan using 4-dicyclohexylcarbodimide (DCC), and N-hydroxysuccimide (NHS). Introduction of PEG was confirmed by (1)H and (13)C NMR spectroscopy and FT-IR spectroscopy. The degree of substitution (DS) of MPEG into chitosan was calculated from (1)H NMR data and also by estimating the molecular weight (MW) using gel permeation chromatography (GPC). The DS values obtained from (1)H NMR spectroscopy and GPC were similar, indicating that MPEG-grafted LMWSC was synthesized and properly characterized. Furthermore, the introduction of PEG into chitosan increases the solubility in aqueous solutions over a range of pH values (4.0-11.0) and organic solvents such as DMF, DMSO, ethanol, and acetone.     

Cell therapy for skin wound using fibroblast encapsulated poly(ethylene glycol)-poly(L-alanine) thermogel

As a new application of a thermogel, a poly(ethylene glycol)-b-poly(L-alanine) (PEG-L-PA) gel encapsulating fibroblasts was investigated for wound healing. The fibroblasts were encapsulated by the temperature sensitive sol-to-gel transition of the polymer aqueous solution. Under the in vitro three-dimensional (3D) cell culture condition, the PEG-L-PA thermogel was comparable with Matrigel for cell proliferation and was significantly better than Matrigel for collagen types I and III formation. After confirming the excellent 3D microenvironment of the PEG-L-PA thermogel for fibroblasts, in vivo wound healing was investigated by injecting the cell-suspended polymer aqueous solution on incisions of rat skin, where the cell-encapsulated gel was formed in situ. Compared with the phosphate buffered saline treated system and the cell-free PEG-L-PA thermogel, the cell-encapsulated PEG-L-PA thermogel not only accelerated the wound closure but also improved epithelialization and the formation of skin appendages such as keratinocyte layer (epidermis), hair follicles, and sebaceous glands. The results demonstrate the potential of thermogels for cell therapy as an injectable tissue-engineering scaffold.     

Adsorption of poly(ethylene glycol)-modified ribonuclease A to a poly(lactide-co-glycolide) surface

Protein adsorption is a source of variability in the release profiles of therapeutic proteins from biodegradable microspheres. We employ optical reflectometry and total internal reflection fluorescence to explore the extent and kinetics of ribonuclease A (RNase A) adsorption to spin-cast films of poly(lactide-co-glycolide) (PLG) and, in particular, to determine how covalent grafting of polyethylene glycol (PEG) to RNase A affects adsorption. Adsorption kinetics on PLG surfaces are surface-limited for RNase A but transport-limited for unconjugated PEG homopolymers and for PEG-modified RNase A, indicating that PEG anchors the conjugates to the surface during the transport-limited regime. PEG modification of RNase A decreases the total number of adsorbed molecules per unit area but increases the areal surface coverage because the grafted PEG chains exclude additional surface area. Total internal reflection fluorescence-based exchange measurements show that there is no exchange between adsorbed and solution-phase protein molecules. This indicates an unusually tenacious adsorption. Streaming current measurements indicate that the zeta potential of the PLG surface becomes increasingly negative as the film is exposed to water for several weeks, as expected. Aging of the PLG surface results in increased adsorption of unmodified RNase A but decreased adsorption of unconjugated PEG homopolymers and of PEG-RNase A conjugates, relative to the extent of adsorption on freshly prepared PLG surfaces. Adsorption results correlate well with an increase in the rate, total extent and preservation of bioactivity of RNase A released from PLG microspheres for the PEG-modified version of RNase A.     

Photografted poly(ethylene glycol) matrix for affinity interaction studies

A poly(ethylene glycol) (PEG)-based matrix for studies of affinity interactions is developed and demonstrated. The PEG matrix, less than 0.1 microm thick, is graft copolymerized onto a cycloolefin polymer from a mixture of PEG methacrylates using a free radical reaction initiated by UV light at 254 nm. The grafting process is monitored in real time, and characteristics such as thickness, homogeneity, relative composition, photostability, and performance in terms of protein resistance in complex biofluids and sensor qualities are investigated with null ellipsometry, infrared spectroscopy, and surface plasmon resonance. The matrix is subsequently modified to contain carboxyl groups, thereby making it possible to immobilize ligands in a controlled and functional manner. Human serum albumin and fibrinogen are immobilized and successfully detected by antibody recognition using surface plasmon resonance. The results are encouraging and suggest that the PEG matrix is suitable for biochip and biosensor applications in demanding biofluids.     

Microchip electrophoresis for monitoring covalent attachment of poly(ethylene glycol) to proteins

A microchip electrophoretic method was applied to monitor and characterize the covalent attachment of poly(ethylene glycol) (PEGylation) of two proteins, α-lactalbumin and bovine serum albumin, using several poly(ethylene glycol) (PEG) derivatives with molecular weights from 1 to 20 kDa. This method effectively separated multi-PEGylated proteins in a size-based manner and allowed monitoring of the PEGylation pattern with the advantages of high speed, minimal sample consumption, and high reproducibility. Microchip electrophoresis would be a very useful tool for protein PEGylation studies such as reaction monitoring, purity checks, and characterization of PEGylated protein products.     

Preparation and characterization of active site protected poly(ethylene glycol)–avidin bioconjugates

Avidin was modified with poly(ethylene glycol) in the presence of a biotin binding site protective agent synthesised by imminobiotin conjugation to branched 20 kDa PEG. Avidin was incubated with imminobiotin–PEG and reacted with high amounts of 5, 10 or 20 kDa PEG to modify the protein amino groups. Circular dichroism demonstrated that the extensive PEGylation does not alter the protein conformational structure. The affinity of avidin–PEG conjugates for biotin and biotinylated antibodies depended on the PEG size or the use of a protective agent. Avidin–PEG 10 and 20 kDa prepared in the presence of imminobiotin–PEG maintained 100% of the native affinity for biotin. The 5 kDa PEG derivative and the ones obtained without biotin site protection maintained 79–85% of the native affinity. The affinity for biotinylated antibodies decreased to 35% when the conjugation was performed without imminobiotin–PEG, while the conjugates obtained with high-molecular-weight PEGs in the presence of protective agent displayed high residual affinity. All conjugates possessed negligible antigenicity and immunogenicity. PEGylation greatly prolonged the avidin permanence in the circulation, reduced its disposition in the liver and kidneys and promoted accumulation into solid tumors. PEGylation was found to prevent the protein cell uptake, either by phagocytosis or pinocytosis.     

Development of poly(ethylene glycol) conjugated lactoferrin for oral administration

Lactoferrin (LF) is an iron-binding glycoprotein that possesses multifunctional biological activities. Recent reports from clinical trials suggest that LF is potentially effective as a therapeutic protein against cancer and gangrene. However, pharmaceutical proteins such as LF are unstable in vivo. Therefore, to improve stability, we developed mono-PEGylated bovine LF (20k-PEG-bLf) with branched 20 kDa (2 x 10 kDa) poly(ethylene glycol) (PEG). We examined in vitro activities such as iron binding, IL-6 cell based assay, and resistance to a proteolytic enzyme in artificial gastric fluid. The 20k-PEG-bLf protein was fully active in iron binding and exhibited 69.6 +/- 2.9% (mean +/- S.E., n = 6) of the original anti-inflammatory activity. The proteolytic half-life increased 2-fold over that of unmodified LF. In vivo pharmacokinetic analyses were performed to examine absorption from the intestinal epithelium and serum clearance. Direct administration of 20k-PEG-bLf (30 mg/kg) into rat stomachs demonstrated that the amount of absorption from the intestinal tract increased approximately 10-fold relative to unmodified LF. Intravenous injection of the protein (1 mg/kg) revealed that 20k-PEG-bLf prolongs serum half-life by approximately 5.4-fold, and that the area under the curve (AUC) was increased approximately 9.2-fold compared to that of unmodified LF. PEGylation improved the physical and pharmacokinetic properties of bovine LF. This is the first report on the use of bioconjugation of LF for the development of a promising oral pharmaceutical agent.     

Enzymatic activation of second-generation dendritic prodrugs: Conjugation of self-immolative dendrimers with poly(ethylene glycol) via click chemistry

Single-triggered disassemble dendrimers were recently developed and introduced as a potential platform for a multi-prodrug. These unique structural dendrimers can release all of their tail units through a self-immolative chain fragmentation initiated by a single cleavage at the dendrimer's core. There are several examples for the bioactivation of first-generation self-immolative dendritic prodrugs. However, enzymatic activation failed for second-generation self-immolative dendrimers. The hydrophobic large molecular structure of the dendritic prodrugs results in aggregation under aqueous conditions and prevented the enzyme from reaching the triggering substrate. Here we show a simple solution for the enzymatic activation of second-generation self-immolative dendrimers. Poly(ethylene glycol) (PEG) was conjugated to the dendritic platform via click chemistry. The poly(ethylene glycol) tails significantly decreased the hydrophobic properties of the dendrimers and thereby prevented aggregate formation. We designed and synthesized a dendritic prodrug with four molecules of the anticancer agent camptothecin and a trigger that can be activated by penicillin-G-amidase. The PEG5000-conjugated, self-immolative dendritic prodrug was effectively activated by penicillin-G-amidase under physiological conditions and free camptothecin was released to the reaction media. Cell-growth inhibition assays demonstrated increased toxicity of the dendritic prodrug upon incubation with the enzyme.     

Mechanism of poly(ethylene glycol) interaction with proteins

Poly(ethylene glycol) (PEG) is one of the most useful protein salting-out agents. In this study, it has been shown that the salting-out effectiveness of PEG can be explained by the large unfavorable free energy of its interaction with proteins. Preferential interaction measurements of beta-lactoglobulin with poly(ethylene glycols) with molecular weights between 200 and 1000 showed preferential hydration of the protein for those with Mr greater than or equal to 400, the degree of hydration increasing with the increase in poly(ethylene glycol) molecular weight. The preferential interaction parameter had a strong cosolvent concentration dependence, with poly(ethylene glycol) 1000 having the sharpest decrease with an increase in concentration. The preferential hydration extrapolated to zero cosolvent concentration increased almost linearly with increasing size of the additive, suggesting steric exclusion as the major factor responsible for the preferential hydration. The poly(ethylene glycol) concentration dependence of the preferential interactions could be explained in terms of the nonideality of poly(ethylene glycol) solutions. All the poly(ethylene glycols) studied, when used at levels of 10-30%, decreased the thermal stability of beta-lactoglobulin, suggesting that caution must be exercised in the use of this additive at extreme conditions such as high temperature.     

Cryopreservation of cell-containing poly(ethylene) glycol hydrogel microarrays

Here we describe the fabrication and preservation of mammalian cell-containing hydrogel microarrays that have potential applications in drug screening and pathogen detection. Hydrogel microstructures containing murine fibroblasts were fabricated on silicon substrates and subjected to a "stage-down" freezing process. The percent viability of both immortal and primary embryonic murine fibroblast cells within the gels was determined at various stages in the freezing process, showing that cells entrapped in hydrogel microstructures remained viable throughout the process. When compared to immortalized adherent cultures subjected to the same freezing process, cells within hydrogel structures had higher cell viabilities at all stages during preservation. Finally, the necessity of using a cryoprotectant, dimethyl sulfoxide (DMSO), was investigated. Cells in hydrogels were cryopreserved with and without DMSO. The addition of DMSO altered cell viability after the freeze-thaw process, enhancing viability in an immortalized cell line and decreasing viability in a primary cell line.     

Helix stabilization of poly(ethylene glycol)-peptide conjugates

Hybrid polymer-peptide conjugates offer the potential for incorporating biological function into synthetic materials. The secondary structure of short helical peptides, however, frequently becomes less stable when expressed independent of longer protein sequences or covalently linked with a conformationally disordered synthetic polymer. Recently, new amphipathic peptide-poly(ethylene glycol) conjugates were introduced (Shu, J., et al. Biomacromolecules 2008, 9, 2011), which displayed enhanced peptide helicity upon polymer functionalization while retaining tertiary coiled-coil associations. We report here a molecular simulation study of peptide helix stabilization by conjugation with poly(ethylene glycol). The polymer oxygens are shown to favorably interact with the cationic lysine side chains, providing an alternate binding site that protects against disruption of the peptide hydrogen-bonds that stabilize the helical conformation. When the peptide lysine charges are neutralized or poly(ethylene glycol) is conjugated with polyalanine, the polymer exhibits a negligible effect on the secondary structure. We also observe the interactions of poly(ethylene glycol) with the amphipathic peptide lysines tends to segregate the polymer away from the nonpolar face of the helix, suggesting no disruption of the interactions that drive tertiary contacts between helicies.