AFM study of the elastin-like biopolymer poly(ValGlyGlyValGly)

In this paper, we report an AFM study on the supramolecular structures adopted by the synthetic polypentapeptide poly(ValGlyGlyValGly), whose monomeric sequence is an abundant, simple building block of elastin. The polypeptide was analyzed by deposition from both methanolic and aqueous suspensions, showing different behaviors. In methanol, the polypeptide is able to evolve, in a time-dependent way, from layers to ribbons to beaded filaments. When the equilibrium is reached, the formation of well-defined dendritic structures is also observed. This restructuring of the polypentapeptide seems to be reminiscent of a sort of Rayleigh instability. When deposited from aqueous suspensions, the polypeptide self-assembles either in fibrillar networks or in amyloid-like patterns, both of them being found in elastin or elastin-related polypeptides. As a general finding, poly(ValGlyGlyValGly) seems to constitute an excellent mimetic of the supramolecular properties of native elastin.     

High‐molecular‐weight poly(Gly‐Val‐Gly‐Val‐Pro) synthesis through microwave irradiation

In this study, we synthesized a polypeptide from its pentapeptide unit using microwave irradiation. Effective methods for polypeptide synthesis from unit peptides have not been reported. Here, we used a key elastin peptide, H‐GlyValGlyValPro‐OH (GVGVP), as the monomer peptide. It is difficult to obtain poly(Gly‐Val‐Gly‐Val‐Pro) (poly(GVGVP)) from the pentapeptide unit of elastin, GVGVP, via polycondensation. Poly(GVGVP) prepared from genetically recombinant Escherichia coli is a well‐known temperature‐sensitive polypeptide, and this temperature sensitivity is known as the lower critical solution temperature. When microwave irradiation was performed in the presence of various additives, the pentapeptide (GVGVP) polycondensation reaction proceeded smoothly, resulting in a product with a high molecular weight in a relatively good yield. The reaction conditions, like microwave irradiation, coupling agents, and solvents, were optimized to increase the reaction efficiency. The product exhibited a molecular weight greater than Mr 7000. Further, the product could be synthesized on a gram scale. The synthesized polypeptide exhibited a temperature sensitivity that was similar to that of poly(GVGVP) prepared from genetically recombinant E. coli. Therefore, this technique offers a facile and quick approach to prepare polypeptides in large amounts. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

Transformation of amyloid-like fibers, formed from an elastin-based biopolymer, into a hydrogel: an X-ray photoelectron spectroscopy and atomic force microscopy study

Previous studies have revealed the propensity of elastin-based biopolymers to form amyloid-like fibers when dissolved in water. These are of interest when considered as "ancestral units" of elastin in which they represent the simplest sequences in the hydrophobic regions of the general type XxxGlyGlyZzzGly (Xxx, Zzz = Val, Leu). We normally refer to these biopolymers based on elastin or related to elastin units as "elastin-like polypeptides". The requirement of water for the formation of amyloids seems quite interesting and deserves investigation, the water representing the natural transport medium in human cells. As a matter of fact, the "natural" supramolecular organization of elastin is in the form of beaded-string-like filaments and not in the form of amyloids whose "in vivo" deposition is associated with some important human diseases. Our work is directed, therefore, to understanding the mechanism by which such hydrophobic sequences form amyloids and any conditions by which they might regress to a non-amyloid filament. The elastin-like sequence here under investigation is the ValGlyGlyValGly pentapeptide that has been previously analyzed both in its monomer and polymer form. In particular, we have focused our investigation on the apparent stability of amyloids formed from poly(ValGlyGlyValGly), and we have observed these fibers evolving to a hydrogel after prolonged aging in water. We will show how atomic force microscopy can be combined with X-ray photoelectron spectroscopy to gain an insight into the spontaneous organization of an elastin-like polypeptide driven by interfacial interactions. The results are discussed also in light of fractal-like assembly and their implications from a biomedical point of view.     

Effects of short elastin‐like peptides on filamentous particles and their transition behavior

While elastin‐like polypeptides and peptides (ELPs) have been used for various stimulus‐responsive applications, details of their switching remain unclear. We therefore constructed a novel series of filamentous phage particles displaying a high surface density of short ELPs. The surface display of ELPs did not disrupt either particle shape or dimensions, and the resulting ELP‐phage particles were colloidally stable over several weeks. However, in spite of a saturating surface density, macroscopic aggregation of ELP‐phages cannot be triggered in water. To investigate the underlying mechanisms we examined conformational changes in the secondary structure of the phage proteins by circular dichroism and tryptophan fluorescence, which indicate partial protein unfolding in ELP‐phage particles. To gain further insight into the ELP itself, analogous “free” ELP peptides were synthesized and characterized. Circular dichroism of these peptides shows the onset of β‐type conformations with increasing temperature, consistent with the accepted view of the microscopic transition that underlies the inverse phase behavior of ELPs. Increased guest residue hydrophobicity was found to depress the microscopic transition temperature of the peptides, also consistent with a previously proposed intramolecular hydrogen‐bonding mechanism. Importantly, our results indicate that although the nanoscale presentation state can suppress macroscopic aggregation of ELPs, microscopic transitions of the ELP can still occur. Given the growing use of ELPs within supra‐molecular scaffolds, such effects are important design considerations for future applications. Biotechnol. Bioeng. 2013; 110: 1822–1830. © 2013 Wiley Periodicals, Inc.     

Sequence and domain arrangements influence mechanical properties of elastin‐like polymeric elastomers

Elastin is the polymeric, extracellular matrix protein that provides properties of extensibility and elastic recoil to large arteries, lung parenchyma, and other tissues. Elastin assembles by crosslinking through lysine residues of its monomeric precursor, tropoelastin. Tropoelastin, as well as polypeptides based on tropoelastin sequences, undergo a process of self‐assembly that aligns lysine residues for crosslinking. As a result, both the full‐length monomer as well as elastin‐like polypeptides (ELPs) can be made into biomaterials whose properties resemble those of native polymeric elastin. Using both full‐length human tropoelastin (hTE) as well as ELPs, we and others have previously reported on the influence of sequence and domain arrangements on self‐assembly properties. Here we investigate the role of domain sequence and organization on the tensile mechanical properties of crosslinked biomaterials fabricated from ELP variants. In general, substitutions in ELPs involving similiar domain types (hydrophobic or crosslinking) had little effect on mechanical properties. However, modifications altering either the structure or the characteristic sequence style of these domains had significant effects on such properties. In addition, using a series of deletion and replacement constructs for full‐length hTE, we provide new insights into the role of conserved domains of tropoelastin in determining mechanical properties. © 2012 Wiley Periodicals, Inc. Biopolymers 99: 392–407, 2013.     

Synthesis of pathological and nonpathological human exon 1 huntingtin

Huntington's disease (HD) is a neurodegenerative disorder that affects approximately 1 in 10 000 individuals. The underlying gene mutation was identified as a CAG‐triplet repeat expansion in the gene huntingtin. The CAG sequence codes for glutamine, and in HD, an expansion of the polyglutamine (poly‐Q) stretch above 35 glutamine residues results in pathogenicity. It has been demonstrated in various animal models that only the expression of exon 1 huntingtin, a 67‐amino acid‐long polypeptide plus a variable poly‐Q stretch, is sufficient to cause full HD‐like pathology. Therefore, a deeper understanding of exon 1 huntingtin, its structure, aggregation mechanism and interaction with other proteins is crucial for a better understanding of the disease. Here, we describe the synthesis of a 109‐amino acid‐long exon 1 huntingtin peptide including a poly‐Q stretch of 42 glutamines. This microwave‐assisted solid phase peptide synthesis resulted in milligram amounts of peptide with high purity. We also synthesized a nonpathogenic version of exon 1 huntingtin (90‐amino acid long including a poly‐Q stretch of 23 glutamine residues) using the same strategy. In circular dichroism spectroscopy, both polypeptides showed weak alpha‐helical properties with the longer peptide showing a higher helical degree. These model peptides have great potential for further biomedical analyses, e.g. for large‐scale pre‐screenings for aggregation inhibitors, further structural analyses as well as protein–protein interaction studies. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Influence of amino acid specificities on the molecular and supramolecular organization of glycine-rich elastin-like polypeptides in water

Elastin-like polypeptides adopt complex supramolecular structures, showing either a hydrophobic or a hydrophilic surface, depending on their surrounding environment and the supporting substrate. The preferred organization is important in many situations ranging from biocompatibility to bio-function. Here we compare the n-repeat pentamer LeuGlyGlyValGly (n = 7) with the analogue ValGlyGlyValGly (n = 5), as water suspensions and as deposits on silicon substrates. These sequences contain the repeat XxxGlyGlyZzzGly (Xxx, Zzz = Val, Leu) motif belonging to the hydrophobic glycine-rich domain of elastin and represent a simplified model from which to obtain information on molecular interactions functional to elastin itself. The compounds studied differ only by the presence of the -CH(2)- spacer in the Leu moiety and thus the work was aimed at revealing the influence of this spacer element on self assembly. Both polypeptides were studied under identical conditions, using combined techniques, to identify differences in their conformational states both at molecular (CD, FTIR) and supramolecular (XPS, AFM) levels. By these means, together with a Congo Red spectroscopic assay of β-sheet formation in water, a clear correlation between amino acid sequences (sequence specificity) and their kinetics and ordering of aggregation has emerged. The novel outcomes of this work are from the supplementary measurements, made to augment the AFM and XPS studies, showing that the significant step in the self assembly of both polypeptides takes place in the liquid phase and from the finding that the substitution of Val by Leu in the first position of the pentapeptide effectively inhibits the formation of amyloidal fibers.     

Effect of detergents on the thermal behavior of elastin‐like polypeptides

Elastin‐like polypeptide (ELP) fusions have been designed to allow large‐scale, nonchromatographic purification of many soluble proteins by using the inverse transition cycling (ITC) method; however, the sensitivity of the aqueous lower critical solubility phase transition temperature (T_t) of ELPs to the addition of cosolutes, including detergents, may be a potential hindrance in purification of proteins with surface hydrophobicity in such a manner. To identify detergents that are known to solubilize such proteins (e.g., membrane proteins) and that have little effect on the T_t of the ELP, we screened a number of detergents with respect to their effects on the T_t and secondary structures of a model ELP (denoted here as ELP180). We found that mild detergents (e.g., n‐dodecyl‐β‐D ‐maltoside, Triton‐X100, and 3‐[(3‐cholamidopropyl) dimethylamino]‐1‐propanesulfonate) do not alter the phase transition behavior or structure (as probed by circular dichroism) of ELP180. This result is in contrast to previous studies that showed a strong effect of other detergents (e.g., sodium dodecylsulfate) on the T_t of ELPs. Our results clearly indicate that mild detergents do not preclude ITC‐based separation of ELPs, and thus that ELP fusions may prove to be useful in the purification of detergent‐solubilized recombinant hydrophobic proteins, including membrane proteins, which are otherwise notoriously difficult to extract and purify by conventional separation methods (e.g., chromatography). © 2012 Wiley Periodicals, Inc.     

Evolution and function of eukaryotic‐like proteins from sponge symbionts

Sponges (Porifera) are ancient metazoans that harbour diverse microorganisms, whose symbiotic interactions are essential for the host's health and function. Although symbiosis between bacteria and sponges are ubiquitous, the molecular mechanisms that control these associations are largely unknown. Recent (meta‐) genomic analyses discovered an abundance of genes encoding for eukaryotic‐like proteins (ELPs) in bacterial symbionts from different sponge species. ELPs belonging to the ankyrin repeat (AR) class from a bacterial symbiont of the sponge Cymbastela concentrica were subsequently found to modulate amoebal phagocytosis. This might be a molecular mechanism, by which symbionts can control their interaction with the sponge. In this study, we investigated the evolution and function of ELPs from other classes and from symbionts found in other sponges to better understand the importance of ELPs for bacteria–eukaryote interactions. Phylogenetic analyses showed that all of the nine ELPs investigated were most closely related to proteins found either in eukaryotes or in bacteria that can live in association with eukaryotes. ELPs were then recombinantly expressed in Escherichia coli and exposed to the amoeba Acanthamoeba castellanii, which is functionally analogous to phagocytic cells in sponges. Phagocytosis assays with E. coli containing three ELP classes (AR, TPR‐SEL1 and NHL) showed a significantly higher percentage of amoeba containing bacteria and average number of intracellular bacteria per amoeba when compared to negative controls. The result that various classes of ELPs found in symbionts of different sponges can modulate phagocytosis indicates that they have a broader function in mediating bacteria–sponge interactions.     

Peptide synthesis ‘in water’ by a solution‐phase method using water‐dispersible nanoparticle Boc‐amino acid

Regulatory pressure has compelled the chemical manufacturing industry to reduce the use of organic solvents in synthetic chemistry, and there is currently a strong focus on replacing these solvents with water. Here, we describe an efficient in‐water solution‐phase peptide synthesis method using Boc‐amino acids. It is based on a coupling reaction utilizing suspended water‐dispersible nanoparticle reactants. Using this method, peptides were obtained in good yield and with high purity. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Exploring hydrophobicity limits of polyproline helix with oligomeric octahydroindole‐2‐carboxylic acid

The polyproline‐II helix is the most extended naturally occurring helical structure and is widely present in polar, exposed stretches and “unstructured” denatured regions of polypeptides. Can it be hydrophobic? In this study, we address this question using oligomeric peptides formed by a hydrophobic proline analogue, (2S,3aS,7aS)‐octahydroindole‐2‐carboxylic acid (Oic). Previously, we found the molecular principles underlying the structural stability of the polyproline‐II conformation in these oligomers, whereas the hydrophobicity of the peptide constructs remains to be examined. Therefore, we investigated the octan‐1‐ol/water partitioning and inclusion in detergent micelles of the oligo‐Oic peptides. The results showed that the hydrophobicity is remarkably enhanced in longer oligomeric sequences, and the oligo‐Oic peptides with 3 to 4 residues and higher are specific towards hydrophobic environments. This contrasts significantly to the parent oligoproline peptides, which were moderately hydrophilic. With these findings, we have demonstrated that the polyproline‐II structure is compatible with nonpolar media, whereas additional manipulations of the terminal functionalities feature solubility in extremely nonpolar solvents such as hexane.     

Recovery of poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) from Ralstonia eutropha cultures with non‐halogenated solvents

Reduced downstream costs, together with high purity recovery of polyhydroxyalkanoate (PHA), will accelerate the commercialization of high quality PHA‐based products. In this work, a process was designed for effective recovery of the copolymer poly(hydroxybutyrate‐co‐hydroxyhexanoate) (P(HB‐co‐HHx)) containing high levels of HHx (>15 mol%) from Ralstonia eutropha biomass using non‐halogenated solvents. Several non‐halogenated solvents (methyl isobutyl ketone, methyl ethyl ketone, and butyl acetate and ethyl acetate) were found to effectively dissolve the polymer. Isoamyl alcohol was found to be not suitable for extraction of polymer. All PHA extractions were performed from both dry and wet cells at volumes ranging from 2 mL to 3 L using a PHA to solvent ratio of 2% (w/v). Ethyl acetate showed both high recovery levels and high product purities (up to 99%) when using dry cells as starting material. Recovery from wet cells, however, eliminates a biomass drying step during the downstream process, potentially saving time and cost. When wet cells were used, methyl isobutyl ketone (MIBK) was shown to be the most favorable solvent for PHA recovery. Purities of up to 99% and total recovery yields of up to 84% from wet cells were reached. During polymer recovery with either MIBK or butyl acetate, fractionation of the extracted PHA occurred, based on the HHx content of the polymer. PHA with higher HHx content (17–30 mol%) remained completely in solution, while polymer with a lower HHx content (11–16 mol%) formed a gel‐like phase. All PHA in solution could be precipitated by addition of threefold volumes of n‐hexane or n‐heptane to unfiltered PHA solutions. Effective recycling of the solvents in this system is predicted due to the large differences in the boiling points between solvent and precipitant. Our findings show that two non‐halogenated solvents are good candidates to replace halogenated solvents like chloroform for recovery of high quality PHA. Biotechnol. Bioeng. 2013; 110: 461–470. © 2012 Wiley Periodicals, Inc.     

Beaded nanofibers assembled from double‐hydrophobic elastin‐like block polypeptides: Effects of trifluoroethanol

A “double‐hydrophobic” elastin‐like triblock polypeptide GPG has been constructed by mimicking the localization of proline‐ and glycine‐rich hydrophobic domains of native elastin, a protein that provides elasticity and resilience to connective tissues. In this study, the effects of trifluoroethanol (TFE), an organic solvent that strongly affects secondary structures of polypeptides on self‐assembly of GPG in aqueous solutions were systematically studied. Beaded nanofiber formation of GPG , where nanoparticles are initially formed by coacervation of the polypeptides followed by their connection into one‐dimensional nanostructures, is accelerated by the addition of TFE at the concentrations up to 30% (v/v), whereas aggregates of nanoparticles are formed at 60% TFE. The concentration‐dependent assembly pattern discussed is based on the influence of TFE on the secondary structures of GPG . Well‐defined nanofibers whose diameter and secondary structures are controlled by TFE concentration may be ideal building blocks for constructing bioelastic materials in tissue engineering. © 2014 Wiley Periodicals, Inc. Biopolymers 103: 175–185, 2015.     

Intrinsically unstructured proteins by design—electrostatic interactions can control binding,folding, and function of a helix‐loop‐helix heterodimer

Intrinsically disordered proteins that exist as unordered monomeric structures in aqueous solution at pH 7 but fold into four‐helix bundles upon binding to recognized polypeptide targets have been designed. NMR and CD spectra of the monomeric polypeptides show the hallmarks of unordered structures, whereas in the bound state they are highly helical. Analytical ultracentrifugation data shows that the polypeptides bind to their targets to form exclusively heterodimers at neutral pH. To demonstrate the relationship between binding, folding, and function, a catalytic site for ester hydrolysis was introduced into an unordered and largely inactive monomer, but that was structured and catalytically active in the presence of a specific polypeptide target. Electrostatic interactions between surface‐exposed residues inhibited the binding and folding of the monomers at pH 7. Charge–charge repulsion between ionizable amino acids was thus found to be sufficient to disrupt binding between polypeptide chains despite their inherent propensities for structure formation and may be involved in the folding and function of inherently disordered proteins in biology. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Aromatic‐interaction‐mediated inhibition of β‐amyloid assembly structures and cytotoxicity

Abnormal aggregation of β‐amyloid (Aβ) peptide plays an important role in the onset and progress of Alzheimer's disease (AD); hence, targeting Aβ aggregation is considered as an effective therapeutic strategy. Here, we studied the aromatic‐interaction‐mediated inhibitory effect of oligomeric polypeptides (K8Y8, K4Y8, K8W8) on Aβ42 fibrillization process. The polypeptides containing lysine as well as representative aromatic amino acids of tryptophan or tyrosine were found to greatly suppress the aggregation as evaluated by thioflavin T assay. Circular dichroism spectra showed that the β‐sheet formation of Aβ42 peptides decreased with the polypeptide additives. Molecular docking studies revealed that the oligomeric polypeptides could preferentially bind to Aβ42 through π–π stacking between aromatic amino acids and Phe19, together with hydrogen bonding. The cell viability assay confirmed that the toxicity of Aβ42 to SH‐SY5Y cells was markedly reduced in the presence of polypeptides. This study could be beneficial for developing peptide‐based inhibitory agents for amyloidoses. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd.     

Purification of recombinant proteins by fusion with thermally-responsive polypeptides.

Elastin-like polypeptides (ELPs) undergo a reversible, inverse phase transition. Below their transition temperature (Tt), ELPs are soluble in water, but when the temperature is raised above Tt, phase transition occurs, leading to aggregation of the polypeptide. We demonstrate a method for purification of soluble fusion proteins incorporating an ELP tag. Advantages of this method, termed "inverse transition cycling," include technical simplicity, low cost, ease of scale-up, and capacity for multiplexing. More broadly, the ability to environmentally modulate the physicochemical properties of recombinant proteins by fusion with ELPs will allow diverse applications in bioseparation, immunoassays, biocatalysis, and drug delivery.     

Biochemical,mechanical, and spectroscopic analyses of genetically engineered flax fibers producing bioplastic (poly‐β‐hydroxybutyrate)

The interest in biofibers has grown in recent years due to their expanding range of applications in fields as diverse as biomedical science and the automotive industry. Their low production costs, biodegradability, physical properties, and perceived eco‐friendliness allow for their extensive use as composite components, a role in which they could replace petroleum‐based synthetic polymers. We performed biochemical, mechanical, and structural analyses of flax stems and fibers derived from field‐grown transgenic flax enriched with PHB (poly‐β‐hydroxybutyrate). The analyses of the plant stems revealed an increase in the cellulose content and a decrease in the lignin and pectin contents relative to the control plants. However, the contents of the fibers' major components (cellulose, lignin, pectin) remain unchanged. An FT‐IR study confirmed the results of the biochemical analyses of the flax fibers. However, the arrangement of the cellulose polymer in the transgenic fibers differed from that in the control, and a significant increase in the number of hydrogen bonds was detected. The mechanical properties of the transgenic flax stems were significantly improved, reflecting the cellulose content increase. However, the mechanical properties of the fibers did not change in comparison with the control, with the exception of the fibers from transgenic line M13. The generated transgenic flax plants, which produce both components of the flax/PHB composites (i.e., fibers and thermoplastic matrix in the same plant organ) are a source of an attractive and ecologically safe material for industry and medicine. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Asymmetrically simultaneous synthesis of L‐homophenylalanine and N6‐protected‐2‐oxo‐6‐amino‐hexanoic acid by engineered Escherichia coli aspartate aminotransferase

L ‐Homophenylalanine (L ‐HPA) and N⁶‐protected‐2‐oxo‐6‐amino‐hexanoic acid (N⁶‐protected‐OAHA) can be used as building blocks for the manufacture of angiotensin‐converting enzyme inhibitors. To synthesize L ‐HPA and N⁶‐protected‐OAHA simultaneously from 2‐oxo‐4‐phenylbutanoic acid (OPBA) and N⁶‐protected‐L ‐lysine, several variants of Escherichia coli aspartate aminotransferase (AAT) were developed by site‐directed mutagenesis and their catalytic activities were investigated. Three kinds of N⁶‐protected‐L ‐lysine were tested as potential amino donors for the bioconversion process. AAT variants of R292E/L18H and R292E/L18T exhibited specific activities of 0.70±0.01 U/mg protein and 0.67±0.02 U/mg protein to 2‐amino‐6‐tert‐butoxycarbonylamino‐hexanoic acid (BOC‐lysine) and 2‐amino‐6‐(2,2,2‐trifluoro‐acetylamino)‐hexanoic acid, respectively. E. coli cells expressing R292E/L18H variant were able to convert OPBA and BOC‐lysine to L ‐HPA and 2‐oxo‐6‐tert‐butoxycarbonylamino‐hexanoic acid (BOC‐OAHA) with 96.2% yield in 8 h. This is the first report demonstrating a process for the simultaneous production of two useful building blocks, L ‐HPA and BOC‐OAHA. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Conformational studies of a bicyclic,lactam‐constrained parathyroid hormone‐related protein‐derived agonist

The N‐terminal 1–34 segments of both parathyroid hormone (PTH) and parathyroid hormone‐related protein (PTHrP) bind and activate the same membrane receptor in spite of major differences in their amino acid sequence. The hypothesis was made that they share the same bioactive conformation when bound to the receptor. A common structural motif in all bioactive fragments of the hormone in water/trifluoroethanol mixtures or in aqueous solution containing detergent micelles is the presence of two helical segments at the N‐ and C‐termini of the sequence. In order to stabilize the helical structures, we have recently synthesized and studied the PTHrP(1–34) analog [(Lys13–As p¹⁷, Lys26–As p³⁰)]PTHrP(1–34)NH₂, which contains lactam‐constrained Lys‐Asp side chains at positions i, i+4. This very potent agonist exhibits enhanced helix stability with respect to the corresponding linear peptide and also two flexible sites at positions 12 and 19 in 1:1 trifluoroethanol/water. These structural elements have been suggested to play a critical role in bioactivity. In the present work we have extended our conformational studies on the bicyclic lactam‐constrained analog to aqueous solution. By CD, 2D‐NMR and structure calculations we have shown that in water two helical segments are present in the region of the lactam bridges (13–18, and 26–31) with high flexibility around Gly¹² and Arg¹⁹. Thus, the essential structural features observed in the aqueous‐organic medium are maintained in water even if, in this solvent, the overall structure is more flexible. Our findings confirm the stabilizing effect of side‐chain lactam constraints on the α‐helical structure. Copyright © 1999 European Peptide Society and John Wiley & Sons, Ltd.