Laser exposure of gold nanorods can induce intracellular calcium transients

Uncoated and poly(styrene sulphonate) (PSS)‐coated gold nanorods were taken up by NG108‐15 neuronal cells. Exposure to 780 nm laser light at the plasmon resonance wavelength of the gold nanorods was found to induce intracellular Ca²⁺ transients. The higher Ca²⁺ peaks were observed at lower laser doses, with the highest levels obtained at a radiant exposure of 0.33 J/cm². In contrast, the cells without nanoparticles showed a consistently small response, independent of the laser dose. These initial results open up new opportunities for peripheral nerve regeneration treatments and for more efficient optical stimulation techniques. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Circulation and distribution of gold nanoparticles and induced alterations of tissue morphology at intravenous particle delivery

Kinetics, biodistribution, and histological studies were performed to evaluate the particle‐size effects on the distribution of 15 nm and 50 nm PEG‐coated colloidal gold (CG) particles and 160 nm silica/gold nanoshells (NSs) in rats and rabbits. The above nanoparticles (NPs) were used as a model because of their importance for current biomedical applications such as photothermal therapy, optical coherence tomography, and resonance‐scattering imaging. The dynamics of NPs circulation in vivo was evaluated after intravenous administration of 15 nm CG NPs to rabbit, and the maximal concentrations of gold were observed 15–30 min after injection. Rats were injected in the tail vein with PEG‐coated NPs (about 0.3 mg Au/kg rats). 24 h after injection, the accumulation of gold in different organs and blood was determined by atomic absorption spectroscopy. In accordance with the published reports, we observed 15 nm particles in all organs with rather smooth distribution over liver, spleen and blood. By contrast, the larger NSs were accumulated mainly in the liver and spleen. For rabbits, the biodistribution was similar (72 h after intravenous injection). We report also preliminary data on the light microscopy and TEM histological examination that allows evaluation of the changes in biotissues after gold NPs treatment. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Enhancing LSPR Sensitivity of Au Gratings through Graphene Coupling to Au Film

A particular interesting plasmonic system is that of metallic nanostructures interacting with metal films. As the localized surface plasmon resonance (LSPR) behavior of gold nanostructures (Au NPs) on the top of a gold thin film is exquisitely sensitive to the spacer distance of the film-Au NPs, we investigate in the present work the influence of a few-layered graphene spacer on the LSPR behavior of the NPs. The idea is to evidence the role of few-layered graphene as one of the thinnest possible spacer. We first show that the coupling to the Au film induces a strong lowering at around 507 nm and sharpening of the main LSPR of the Au NPs. Moreover, a blue shift in the main LSP resonance of about 13 nm is observed in the presence of a few-layered graphene spacer when compared to the case where gold nanostructures are directly linked to a gold thin film. Numerical simulations suggest that this LSP mode is dipolar and that the hot spots of the electric field are pushed to the top corners of the NPs, which makes it very sensitive to surrounding medium optical index changes and thus appealing for sensing applications. A figure of merit of such a system (gold/graphene/Au NPs) is 2.8, as compared to 2.1 for gold/Au NPs. This represents a 33 % gain in sensitivity and opens-up new sensing strategies.     

Tailored Aggregate-Free Au Nanoparticle Decorations with Sharp Plasmonic Peaks on a U-Type Optical Fiber Sensor by Nanosecond Laser Irradiation

A novel experimental methodology is presented for fabricating U-shaped optical fiber probes decorated with aggregate-free Au nanoparticles exhibiting sharp localized surface plasmon resonance (LSPR) spectra. The U-type tip is coated with gold nanoparticles (AuNPs) using a simple and time-efficient dip-coating procedure, without initially taking any care to prevent the formation of nanoparticle aggregates in the coated area. In a second step, the coating was irradiated with a few tens of laser pulses of 5-ns duration at 532 nm with intensities in the range of 2–14 MW/cm², leading to the formation of aggregate-free LSPR optical fiber probes. The process was monitored and controlled in real time through the changes induced into the fiber’s extinction spectra by the laser irradiation, and the coated fibers were characterized by electron microscopy. The proposed methodology resulted into the fabrication of U-type optical fiber probes coated with AuNPs exhibiting a sharp plasmon peak, which is a perquisite for their application as sensing devices.     

Optimization of the Field Enhancement and Spectral Bandwidth of Single and Coupled Bimetal Core–Shell Nanoparticles for Few-Cycle Laser Applications

We have theoretically studied and optimized the field enhancement and temporal response of single and coupled bimetal Ag/Au core–shell nanoparticles (NPs) with a diameter of 160 nm and compared the results to pure Ag and Au NPs. Very high-field enhancements with an amplitude reaching 100 (with respect to the laser field centered at 800 nm) are found at the center of a 2-nm gap between Ag/Au core–shell dimers. We have explored the excitation of the bimetal core–shell particles by Fourier transform-limited few-cycle optical pulses and identified conditions for an ultrafast plasmonic decay on the order of the excitation pulse duration. The high-field enhancement and ultrafast decay makes bimetal core–shell particles interesting candidates for applications such as the generation of ultrashort extreme ultraviolet radiation pulses via nanoplasmonic field enhancement. Moreover, in first experimental studies, we synthesized small bimetal Ag/Au core–shell NPs and compared their optical response with pure Au and Ag NPs and numerical results.     

Identifying Metal Nanoparticle Size Effect on Sensing Common Human Plasma Protein by Counting the Sensitivity of Optical Absorption Spectra Damping

Colloidal nanoparticles (NPs) interact with biological fluids such as human plasma to form a protein coating (corona) on the surface of NPs (NP-protein complex). However, the impact of size and type of NPs on binding of the hard corona to the surface of NPs as well as damping of their optical spectra has not been systematically explored. To elucidate the interaction between biological environment (human plasma) and NPs, a photophysical measurement was conducted to quantify the interaction of two different types of NPs (gold (Au) and silver (Ag)) with common human plasma proteins. The colloidal AuNPs and AgNPs were electrostatically stabilized and varied in diameter from 10 to 80 nm in the presence of common human plasma. The sizes of the NPs were determined using transmission electron microscopy (TEM). Optical absorption spectra were obtained for the complexes. Dynamic light scattering (DLS) measurement and zeta potential were used to characterize the sizes, hydrodynamic diameters, and surface charges of the protein-NPs complexes. Protein separation was performed using sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) to isolate and identify the protein bands. The absorption of proteins to the NPs was found to be strongly dependent on the size and type of NPs. The distance between surface of NPs by absorbed protein bound to the NPs gradually increased with size of NPs, particularly for AgNPs with primary diameter of < 50 nm. The chi-square test proved that AgNPs are a good candidate in sensing the protein complex in human plasma compared with AuNPs mainly for the AgNPs with diameter sized 50 nm.

     

Gold nanoparticles functionalised by Gd-complex of DTPA-bis(amide) conjugate of glutathione as an MRI contrast agent

The work is directed toward the synthesis of gold nanoparticles (Au NPs) coated with paramagnetic Gd-complex of DTPA-bis(amide) conjugate of glutathione (GdL) for use as a highly efficient MRI contrast agent. Well-dispersed spherical Au NPs coated with gadolinium complexes, abbreviated as Au@GdL, have been obtained; the mean size of Au@GdL is 5-7 nm, and the numbers of GdL are 1.36x10(4) per Au NP. Au@GdL exhibits high longitudinal (r1) and transverse (r2) relaxivities of 1.87x10(5) and 3.02x10(5) mM(-1) s(-1), respectively.     

Second harmonic imaging of plants tissues and cell implosion using two‐photon process in ZnO nanoparticles

The optical properties of colloidal ZnO nanoparticle (NP) solutions, with size ranging from several nm to around 200 nm, have been tailored to have high optical nonlinearity for bioimaging with no auto‐fluorescence above 750 nm and minimal auto‐fluorescence below 750 nm. The high second harmonic conversion efficiency enables selective tissue imaging and cell tracking using tunable near‐infrared femtosecond laser source ranging from 750‐980 nm. For laser energies exceeding the two‐photon energy of the bandgap of ZnO (half of 3.34 eV), the SHG signal greatly decreases and the two‐photon emission becomes the dominant signal. The heat generated due to two‐photon absorption within the ZnO NPs enable selective cell or localized tissue destruction using excitation wavelength ranging from 710–750 nm. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Bare laser‐synthesized Au‐based nanoparticles as nondisturbing surface‐enhanced Raman scattering probes for bacteria identification

The ability of noble metal‐based nanoparticles (NPs) (Au, Ag) to drastically enhance Raman scattering from molecules placed near metal surface, termed as surface‐enhanced Raman scattering (SERS), is widely used for identification of trace amounts of biological materials in biomedical, food safety and security applications. However, conventional NPs synthesized by colloidal chemistry are typically contaminated by nonbiocompatible by‐products (surfactants, anions), which can have negative impacts on many live objects under examination (cells, bacteria) and thus decrease the precision of bioidentification. In this article, we explore novel ultrapure laser‐synthesized Au‐based nanomaterials, including Au NPs and AuSi hybrid nanostructures, as mobile SERS probes in tasks of bacteria detection. We show that these Au‐based nanomaterials can efficiently enhance Raman signals from model R6G molecules, while the enhancement factor depends on the content of Au in NP composition. Profiting from the observed enhancement and purity of laser‐synthesized nanomaterials, we demonstrate successful identification of 2 types of bacteria (Listeria innocua and Escherichia coli). The obtained results promise less disturbing studies of biological systems based on good biocompatibility of contamination‐free laser‐synthesized nanomaterials.

     

Solid and Hollow Gold Nanostructures for Nanomedicine: Comparison of Photothermal Properties

The photothermal properties of solid and hollow gold nanostructures represented by colloidal solutions of spherical nanoparticles, nanoshells, and nanocages upon irradiation with a 100 mW 808 nm continuous-wave laser for the first time were experimentally compared under identical optical density and nanoparticle concentration conditions. Accompanying computer modeling of light absorption by the studied gold nanostructures revealed the general parameters influencing the photothermal efficiency, which is of significance for nanomedical applications. The spectral position of localized plasmonic excitations of the studied nanostructures ranged from 518 nm for solid gold nanoparticles to 718 nm for gold nanocages, which provided a possibility to observe a direct influence of the wavelength proximity between the localized surface plasmon resonance and laser line on the heat generation capability of the nanostructures. As a result, the best photothermal efficiency was registered for gold nanocages, which proves them as an efficient photothermal treatment agent and a possible candidate to build a nanocarrier platform for drug delivery with a controlled release. Light absorption modeling demonstrated an existence of optimal wall thickness for gold nanoshells that should lead to the maximum photothermal efficiency when irradiated with 808 nm light, which varied from about 0.1 to 0.4 in units of external nanoshell radius with an increase of the wall porosity. Additionally, computer modeling results show that increased wall porosity should lead to enhanced photothermal efficiency of polydisperse colloidal solutions of hollow gold nanostructures.     

Emissive Nanoclusters Based on Subnanometer‐Sized Au38 Cores for Boosting the Performance of Inverted Organic Photovoltaic Cells

In spite of the successful enhancement of the power‐conversion efficiency (PCE) in organic bulk heterojunction (BHJ) solar cells by surface plasmon resonance (SPR), the incorporation of several tens of nanometer‐sized (25–50 nm) metal nanoparticles (NPs) has some limitations to further enhancing the PCE due to concerns related to possibly transferring nonradiative energy and disturbing the interface morphology. Instead of tens of nanometer‐sized metal NPs, here, dodecanethiol stabilized Au nanoclusters (Au:SR, R = the tail of thiolate) with sub‐nm‐sized Au38 cores are incorporated on inverted BHJ solar cells. Although metal NPs less than 5 nm in size do not show any scattering or electric field enhancement of incident light by SPR effects, the incorporation of emissive Au:SR nanoclusters provides effects that are quite similar to those of tens of nanometer‐sized plasmonic metal NPs. Due to effective energy transfer, based on the protoplasmonic fluorescence of Au:SR, the highest performing solar cells fabricated with Au:SR clusters yield a PCE of 9.15%; this value represents an ≈20% increase in the efficiency compared to solar cells without Au:SR nanoclusters.     

Green synthesis of strontium nanoparticles self‐assembled in the presence of carboxymethyl cellulose: an in vivo imaging study

Carboxymethyl cellulose (CMC) is one of the main derivatives of cellulose and is used as a drug carrier for hydrophobic and hydrophilic drugs, imaging in vivo, and biological applications. Encapsulation is a technology in which target compounds are coated with wall compounds to form microcapsules. This study reports a new chemical processing wet method for precipitation and encapsulation of strontium nanoparticles (Sr NPs) within CMC structures using a sonochemical method. Preparation parameters such as microwave power and irradiation time as well as morphology and particle size of Sr NPs were also investigated. Products were characterized by X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis and atomic force microscopy. In this study, CMC was used as a biological stabilizer in a retentive phase to encapsulate Sr NPs. For the first time, Sr NPs were synthesized using CMC in a cost‐effective, simple, fast, micellation‐assisted, ultrasound method. Sr NPs were encapsulated in green capping agent structures of either 1%, 2% or 3% weight to provide an efficient optical nanostructure with a high yield at wavelengths 200–700 nm for use in in vivo imaging studies.     

Synthesis of Silver and Gold Nanoparticles Using Cashew Nut Shell Liquid and Its Antibacterial Activity Against Fish Pathogens

This study reveals a green process for the production of multi-morphological silver (Ag NPs) and gold (Au NPs) nanoparticles, synthesized using an agro-industrial residue cashew nut shell liquid. Aqueous solutions of Ag⁺ ions for silver and chloroaurate ions for gold were treated with cashew nut shell extract for the formation of Ag and Au NPs. The nano metallic dispersions were characterized by measuring the surface plasmon absorbance at 440 and 546 nm for Ag and Au NPs. Transmission electron microscopy showed the formation of nanoparticles in the range of 5–20 nm for silver and gold with assorted morphologies such as round, triangular, spherical and irregular. Scanning electron microscopy with energy dispersive spectroscopy and X-ray diffraction analyses of the freeze-dried powder confirmed the formation of metallic Ag and Au NPs in crystalline form. Further analysis by Fourier transform infrared spectroscopy provided evidence for the presence of various biomolecules, which might be responsible for the reduction of silver and gold ions. The obtained Ag and Au NPs had significant antibacterial activity, minimum inhibitory concentration and minimum bactericidal concentration on bacteria associated with fish diseases.     

Dopamine-Induced Growth of Au and Ag Nanoparticles on ITO Substrate and Their Application in PCPDTBT-Based Polymer Solar Cell

The direct attachment and growth of gold or silver nanoparticles (NPs) on indium tin oxide (ITO) surfaces was demonstrated using a simple and inexpensive successive ionic layer adsorption and reaction (SILAR) method by chemical reduction of the precursor metal salts with dopamine aqueous solution. Ag NPs on ITO substrate were approximately spherical with an average particle size of about 57 nm, but had a wide particle size distribution. Compared with Ag NPs, under the same 10 SILAR cycles, Au NPs have higher density packing and smaller average particle size of about 36 nm. XRD characterization and surface chemistry analysis confirmed the formation of Ag and Au NPs on ITO substrate with small amounts of dopamine-quinone adsorbed on the surface of them. Although Au NPs showed characteristic plasmon absorption, this did not result in performance enhancement in solar cell with the structure of ITO/ZnO/PCPDTBT:[6,6]-phenyl C₇₁/MoO₃/Ag because of the energy level mismatch between ZnO and dopamine molecules adsorbed on the surface of metal NPs.     

Optical Properties of Core–Shell Gold–Silver and Silver–Gold Nanoparticles for Near UV and Visible Radiation Wavelengths

Modeling of optical properties of spherical core–shell gold–silver and silver–gold nanoparticles (NPs) was carried out based on extended Mie theory for radiation wavelengths in the range 300?≤?λ?≤?650 nm. Efficiency factors of absorption, scattering, and extinction of radiation by core–shell NPs in the range of the radii 5–100 nm and in the range of shell thicknesses 0–40 nm were calculated. Results show the nonlinear dependences of optical properties of core–shell gold–silver and silver–gold nanoparticles on radiation wavelengths, core radii, and shell thicknesses. These results can be applied for photonic technologies of nanoparticles.     

Plasmonic Backscattering Effect in High‐Efficient Organic Photovoltaic Devices

A universal strategy for efficient light trapping through the incorporation of gold nanorods on the electron transport layer (rear) of organic photovoltaic devices is demonstrated. Utilizing the photons that are transmitted through the active layer of a bulk heterojunction photovoltaic device and would otherwise be lost, a significant enhancement in power conversion efficiency (PCE) of poly[N‐9′‐heptadecanyl‐2,7‐carbazole‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)]:phenyl‐C₇₁‐butyric acid methyl ester (PCDTBT:PC₇₁BM) and poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b] thiophenediyl]] (PTB7):PC₇₁BM by ≈13% and ≈8%, respectively. PCEs over 8% are reported for devices based on the PTB7:PC₇₁BM blend. A comprehensive optical and electrical characterization of our devices to clarify the influence of gold nanorods on exciton generation, dissociation, charge recombination, and transport inside the thin film devices is performed. By correlating the experimental data with detailed numerical simulations, the near‐field and far‐field scattering effects are separated of gold nanorods (Au NRs), and confidently attribute part of the performance enhancement to the enhanced absorption caused by backscattering. While, a secondary contribution from the Au NRs that partially protrude inside the active layer and exhibit strong near‐fields due to localized surface plasmon resonance effects is also observed but is minor in magnitude. Furthermore, another important contribution to the enhanced performance is electrical in nature and comes from the increased charge collection probability.     

Use of ZnO:Tb down‐conversion phosphor for Ag nanoparticle plasmon absorption using a He–Cd ultraviolet laser

Although noble metal nanoparticles (NPs) have attracted some attention for potentially enhancing the luminescence of rare earth ions for phosphor lighting applications, the absorption of energy by NPs can also be beneficial in biological and polymer applications where local heating is desired, e.g. photothermal applications. Strong interaction between incident laser light and NPs occurs only when the laser wavelength matches the NP plasmon resonance. Although lasers with different wavelengths are available and the NP plasmon resonance can be tuned by changing its size and shape or the dielectric medium (host material), in this work, we consider exciting the plasmon resonance of Ag NPs indirectly with a He–Cd UV laser using the down‐conversion properties of Tb³⁺ ions in ZnO. The formation of Ag NPs was confirmed by X‐ray diffraction, transmission electron microscopy and UV–vis diffuse reflectance measurements. Radiative energy transfer from the Tb³⁺ ions to the Ag NPs resulted in quenching of the green luminescence of ZnO:Tb and was studied by means of spectral overlap and lifetime measurements. The use of a down‐converting phosphor, possibly with other rare earth ions, to indirectly couple a laser to the plasmon resonance wavelength of metal NPs is therefore successfully demonstrated and adds to the flexibility of such systems. Copyright © 2016 John Wiley & Sons, Ltd.     

Numerical investigation of thermal response of laser-irradiated biological tissue phantoms embedded with gold nanoshells

The work presented in this paper focuses on numerically investigating the thermal response of gold nanoshells-embedded biological tissue phantoms with potential applications into photo-thermal therapy wherein the interest is in destroying the cancerous cells with minimum damage to the surrounding healthy cells. The tissue phantom has been irradiated with a pico-second laser. Radiative transfer equation (RTE) has been employed to model the light-tissue interaction using discrete ordinate method (DOM). For determining the temperature distribution inside the tissue phantom, the RTE has been solved in combination with a generalized non-Fourier heat conduction model namely the dual phase lag bio-heat transfer model. The numerical code comprising the coupled RTE-bio-heat transfer equation, developed as a part of the current work, has been benchmarked against the experimental as well as the numerical results available in the literature. It has been demonstrated that the temperature of the optical inhomogeneity inside the biological tissue phantom embedded with gold nanoshells is relatively higher than that of the baseline case (no nanoshells) for the same laser power and operation time. The study clearly underlines the impact of nanoshell concentration and its size on the thermal response of the biological tissue sample. The comparative study concerned with the size and concentration of nanoshells showed that 60 nm nanoshells with concentration of 5×10¹⁵ mm⁻³ result into the temperature levels that are optimum for the irreversible destruction of cancer infected cells in the context of photo-thermal therapy. To the best of the knowledge of the authors, the present study is one of the first attempts to quantify the influence of gold nanoshells on the temperature distributions inside the biological tissue phantoms upon laser irradiation using the dual phase lag heat conduction model.     

In situ growth of gold nanoparticles by enzymatic glucose oxidation within alginate gel matrix

In situ growth of gold nanoparticles (Au NPs) was performed in an alginate gel matrix co‐encapsulating Au NP seeds and glucose oxidase (GOx) for the development of a glucose‐sensing platform. We observed a simultaneous growth of Au NPs in the alginate matrix through the reduction of AuCl by H₂O₂ on Au NP seeds. The detection of the glucose level was carried out successfully via the coupling of Au NP enlargement with the oxidation of glucose catalyzed by the immobilized GOx. The enlargement of Au NPs in the alginate matrix exhibited only a red‐shift in absorbance maxima, while the generation of small Au NPs in a free solution caused a blue‐shift in higher glucose concentrations. This study shows that the co‐encapsulation of metal NPs and bioreceptor in a gel matrix may provide a simple route for the fabrication of an optical biosensor. Biotechnol. Bioeng. 2010;105: 210–214. © 2009 Wiley Periodicals, Inc.     

Bioaccumulation of silver and gold nanoparticles in organs and tissues of rats studied by neutron activation analysis

Bioaccumulation of silver (Ag) and gold (Au) nanoparticles (NPs) with mean sizes of 35 nm and 6 nm, respectively, has been studied after their intragastric administration to rats at a dose of 100 μg/kg of body weight for 28 or 14 days. The organs and tissues (liver, kidney, spleen, heart, gonads, brain, and blood) were subjected to thermal neutron activation, and, then, the activity of the ^110mAg and ¹⁹⁸Au isotopes generated was measured. The NPs of both metals were detected in all biological samples studied, the highest specific weight and content of Ag NP being found in the liver, and those of Au being found in kidneys of animals. The content of Ag NPs detected in the brain was 66.4 ± 5.6 ng (36 ng/g tissue), no more than 7% of these NPs being localized in the lumen of brain blood vessels. The content of Ag and Au NPs found in organs and tissues of rats could be regarded as nonhazardous (nontoxic) in accordance with the known literature data.