Optimization and validation of spectrofluorimetric method for determination of cefadroxile and cefuroxime sodium in pharmaceutical formulations

A simple, accurate, precise and validated spectrofluorimetric method is proposed for the determination of two cephalosporins, namely, cefadroxile (cefa) and cefuroxime sodium (cefu) in pharmaceutical formulations. The method is based on a reaction between cephalosporins with 1,2‐naphthoquinone‐4‐sulfonate in alkaline medium, to form fluorescent derivatives that are extracted with chloroform and subsequently measured at 610 and 605 nm after excitation at 470 and 460 nm for cefa and cefu respectively. The optimum experimental conditions have been studied. Beer's law is obeyed over the concentrations of 20–70 ng/mL and 15–40 ng/mL for cefa and cefu, respectively. The detection limits were 4.46 ng/mL and 3.02 ng/mL with a linear regression correlation coefficient of 0.9984 and 0.998, and recoveries ranging 97.50–109.96% and 95.73–98.89% for cefa and cefu, respectively. The effects of pH, temperature, reaction time, 1,2‐naphthoquinone‐4‐sulfonic concentration and extraction solvent on the determination of cefa and cefu, have been examined. The proposed method can be applied for the determination of cefa and cefu in pharmaceutical formulations in quality control laboratories. Copyright © 2013 John Wiley & Sons, Ltd.     

New spectrofluorimetric method for determination of cephalosporins in pharmaceutical formulations

A simple, accurate, precise spectrofluorimetric method has been proposed for the determination of three cephalosporins, namely, cefixime (cefi), cephalexine (ceph), and cefotaxime sodium (cefo) in pharmaceutical formulations. This method is based on a reaction between cephalosporins with 8‐hydroxy‐1,3,6‐pyrenetrisulfonic acid trisodium salt (HPTS) in alkaline medium, at pH 12.0 for cefi and 13.0 for ceph and cefo to give highly fluorescent derivatives extracted with chloroform and subsequent measurements of the formed fluorescent products at 520, 500 and 510 nm after excitation at 480, 470 and 480 nm for cefi, ceph and cefo respectively. The optimum experimental conditions have been studied. Beer's law is obeyed over concentrations of 10–60 ng/mL, 5–35 ng/mL and 10–60 ng/mL for cefi, ceph and cefo, respectively. The detection limits were 4.20 ng/mL, 2.54 ng/mL and 4.09 ng/mL for cefi, ceph and cefo, respectively, with a linear regression correlation coefficient of 0.99783, 0.99705 and 0.9978 and recoveries in ranges 96.96–105.77, 96.13–102.55 and 95.45–105.39% for cefi, ceph and cefo, respectively. This method is simple and can be applied for the determination of cefi, ceph and cefo in pharmaceutical formulations in quality control laboratories. Copyright © 2012 John Wiley & Sons, Ltd.     

Utility of green chemistry for sustainable fluorescence derivatization approach for spectrofluorimetric quantification of Darolutamide as antineoplastic drug in pharmaceutical formulation and spiked human plasma

Darolutamide is an oral nonsteroidal androgen receptor antagonist used to delay the process of prostate cancer to metastatic disease and to increase the quality of life for people with advanced prostate cancer. Here, a second spectrofluorimetric method was advanced for quantifying Darolutamide in pharmaceutical formulation and spiked human plasma. This method depends on the fluorescence derivatization of Darolutamide with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole (NBD-Cl) at 75°C in a (pH 9) of borate buffer to produce a fluorescent derivative that can be detected at 520 nm after excitation at 460 nm. The method has been validated using ICH criteria, and it demonstrated linearity in the range 5–200 ng ml⁻¹_. The limit of detection (LOD) and limit of quantitation (LOQ) were 1.15 and 3.84 nm, respectively. The proposed method was applied precisely and accurately for quantifying Darolutamide within the pharmaceutical formulation and spiking human plasma without any interferences. Moreover, the method's sustainability was evaluated and compared with the published method using two greenness assessment tools termed analytical eco-scale and Analytical GREEnness (AGREE). These findings suggest that the method is more sustainable than the published method.     

Development and validation of a sensitive spectrofluorimetric method for the determination of amoxapine in human plasma and urine

A selective and sensitive spectrofluorimetric method was developed and validated for the determination of amoxapine in human plasma and urine. The developed method is based on labeling with 5‐dimethylaminonaphthalene‐1‐sulfonyl chloride (dansyl chloride) and monitoring at 397 nm (excitation)/514 nm (emission). The method was validated for linearity, limit of detection (LOD), limit of quantification (LOQ), precision, accuracy, recovery and robustness. The calibration curves were linear over a concentration range of 250–2500 and 50–1250 ng/mL for plasma and urine, respectively. The LOD values were calculated to be 13.31 and 13.17 ng/mL for plasma and urine, respectively. The proposed method was applied to study of amoxapine in human plasma and urine. Copyright © 2013 John Wiley & Sons, Ltd.     

Validated spectrofluorimetric method for determination of two phosphodiesterase inhibitors tadalafil and vardenafil in pharmaceutical preparations and spiked human plasma

A valid, sensitive and rapid spectrofluorimetric method has been developed and validated for determination of both tadalafil (TAD) and vardenafil (VAR) either in their pure form, in their tablet dosage forms or spiked in human plasma. This method is based on measurement of the native fluorescence of both drugs in acetonitrile at λ_em 330 and 470 nm after excitation at 280 and 275 nm for tadalafil and vardenafil, respectively. Linear relationships were obtained over the concentration range 4–40 and 10–250 ng/mL with a minimum detection of 1 and 3 ng/mL for tadalafil and vardenafil, respectively. Various experimental parameters affecting the fluorescence intensity were carefully studied and optimized. The developed method was applied successfully for the determination of tadalafil and vardenafil in bulk drugs and tablet dosage forms. Moreover, the high sensitivity of the proposed method permitted their determination in spiked human plasma. The developed method was validated in terms of specificity, linearity, lower limit of quantification (LOQ), lower limit of detection (LOD), precision and accuracy. The mean recoveries of the analytes in pharmaceutical preparations were in agreement with those obtained from the comparison methods, as revealed by statistical analysis of the obtained results using Student's t‐test and the variance ratio F‐test. Copyright © 2015 John Wiley & Sons, Ltd.     

Micellar‐based spectrofluorimetric method for the selective determination of ledipasvir in the presence of sofosbuvir: application to dosage forms and human plasma

A fast, low‐cost, sensitive, and selective spectrofluorimetric method for the determination of ledipasvir was developed and validated. The method is based on an enhancement in the native fluorescence intensity of ledipasvir by 500% of its original value by the formation of hydrogen bonds between the cited drug and Tween‐20 in the micellar system (pH = 5.0). All fluorescence measurements were carried out at 425 nm and 340 nm for emission and excitation wavelengths, respectively. A linear relationship between the concentration of ledipasvir and the observed fluorescence intensity was achieved in the range of 0.1–2.0 μg ml^?1 with 0.028, 0.084 μg ml^?1, for detection and quantitation limits, respectively. The acquired selectivity and sensitivity using the proposed method facilitate the analysis of ledipasvir in spiked human plasma with sufficient percentage recovery (95.36–99.30%). The proposed method was developed and validated according to International Council for Harmonisation (ICH) guidelines. Moreover, the cited drug was successfully determined in its pharmaceutical dosage form using the proposed method. In addition, the validity of the proposed results was statistically confirmed using Student's t‐test, variance ratio F‐test, and interval hypothesis test.     

A novel spectrofluorimetric method for determination of imatinib in pure,pharmaceutical preparation,human plasma,and human urine

The following paper represents a simple, highly sensitive, responsive validated and developed spectrofluorimetric method for estimation of imatinib (IMB) in its pure, commercial preparation, human urine and human blood plasma. The calibration curve was in the range 4–900 ng ml^?1 for pure form and urine and 8–900 ng ml^?1 for plasma in a medium contains carboxymethyl cellulose (CMC) and acetate buffer (pH 5) with excitation wavelength (λ_ex) 230 nm and emission wavelength (λ_em) 307 nm. The limit of detection (LOD) was 0.37 ng ml^?1 for the pure form, 0.64 ng ml^?1 for human urine, and 0.70 ng ml^?1 for human plasma, while the limit of quantitation (LOQ) was 1.2 for pure form, 1.91 for urine and 2.1 for plasma. The suggested method was successfully applied for evaluation of IMB in tablets within 99% mean percentage recovery. The excipients that are usually used as additives in pharmaceutical dosage form did not interfere with the suggested method. The method was efficiently used for estimation of IMB in human urine and human plasma. The effect of some cations that might be present in urine and plasma was also studied. The method was also focused on human volunteers and in vitro drug release.     

Condensation of heptaminol hydrochloride for its spectrofluorimetric determination in pure form and tablets: application in human plasma

A sensitive, simple, accurate and less expensive fluorimetric method was designed and validated for analysis of heptaminol HCl in both its pure and dosage forms, as well as in human plasma. The main principle used in the proposed approach was the condensation reaction between heptaminol's primary amino moiety and ethyl acetoacetate/formaldehyde reagents, giving a derivative that was highly fluorescent at 416 nm after excitation at 350 nm. Various experimental parameters that affected either the product's development or its stability were evaluated and optimized. The constructed calibration curve was linear over the range 0.2–2 μg/ml, with a good correlation coefficient (0.9996). Both the calculated limit of detection and limit of quantitation were 0.06 and 0.18 μg/ml, respectively. The presented approach was a success when used to determine Corasore® tablets and was validated according to International Council for Harmonisation guidelines.     

Highly sensitive spectrofluorimetric method for rapid determination of orciprenaline in biological fluids and pharmaceuticals

Orciprenaline sulphate (ORP) is a direct‐acting sympathomimetic with mainly beta‐adrenoceptor stimulant activity. It is used as a bronchodilator in the management of reversible airway obstruction. For the first time, a rapid highly sensitive spectrofluorimetric method is described that is relied on measuring the fluorescence spectra of ORP at acidic pH and without addition of any chemical reagents. The relative fluorescence intensity was measured at 310 nm and after excitation at 224 nm. ORP native fluorescence was calibrated in both water and acetonitrile as diluting solvents. The method was designed to estimate the drug in miscellaneous matrices with high accuracy and precision. Linear ranges of calibration curves were 30.0–400.0 ng/ml and 10.0–240.0 ng/ml in water and acetonitrile, respectively. The detection limits were calculated and reached as low as 3.3 and 3.1 ng/ml, respectively, representing the ultra‐sensitivity of the proposed method. This result permitted application of this method for spiked human plasma and urine and was used as a preliminary investigation with good percentage recovery (89.4–106.8%). The application was further extended to analyse ORP in its pharmaceutical formulations. The method was validated in compliance with International Council of Harmonization (ICH) Guidelines.     

A novel spectrofluorimetric method for determination of lomefloxacin adopting on zinc(II) chelation strategy: Application in human plasma

A new sensitive and instantaneous spectrofluorimetric method for efficient determination of lomefloxacin (LMX) in its pure, dosage form and human plasma was designed. The developed method depends on formation of a metal-chelation compound of LMX as a ligand with zinc(II) in a buffer of acetate (pH 5.5). The following parameters; type of metal, concentration of metal, pH, type of buffer and diluting solvent were optimized. After carefully investigation; 0.2 mM zinc, 2.0 ml acetate buffer (pH 5.5) and water as diluting solvent were set as optimum reaction conditions. Under these conditions, a large increase in the intensity of the fluorescence of LMX was attained at 450 after excitation at 284 nm. The limits of detection and quantification were 5.8 and 1.9 ng ml⁻¹, respectively, with linearity range of 10.0 to 500.0 ng ml⁻¹. The binding mode of LMX and zinc(II) ion (Zn²⁺) was found to be 2:1, respectively, and confirmed by Job's plot method. Furthermore, it extended to the analysis of LMX in the spiked plasma of humans with percentage recovery (98.70 ± 0.97 to 100.30 ± 1.69%, n = 3).     

Spectrofluorimetric method for the determination of sulpiride in pharmaceutical preparations and human plasma through derivatization with 2‐cyanoacetamide

A sensitive and accurate spectrofluorimetric method has been developed for the determination of sulpiride in pharmaceutical preparations and human plasma. The developed method is based on the derivatization reaction of 2‐cyanoacetamide with sulpiride in 30% ammonical solution. The fluorescent derivatized reaction product exhibited maximum fluorescence intensity at 379 nm after excitation at 330 nm. The optimum conditions for derivatization reactions were studied and the fluorescence intensity versus concentration plot was found to be linear over the concentration range 0.2–20.0 µg/mL with a correlation coefficient of 0.9985. The limit of detection (LOD) and limit of quantification (LOQ) were found to be 0.82 and 2.73 ng/mL, respectively. The proposed method was validated according to ICH guidelines. The effects of common excipients and co‐administered drugs were also studied. The accuracy of the method was checked using the standard addition method and percent recoveries were found to be in the range of 99.00–101.25% for pharmaceutical preparations and 97.00–97.80% for spiked human plasma. The method was successfully applied to commercial formulations and the results obtained for the proposed method were compared with a high‐performance liquid chromatography reference method and statistically evaluated using the Student's t‐test for accuracy and the variance ratio F‐test for precision. A reaction pathway was also proposed. Copyright © 2012 John Wiley & Sons, Ltd.     

Sensitive spectrofluorimetric determination of tizanidine in pharmaceutical preparations,human plasma and urine through derivatization with dansyl chloride

A sensitive spectrofluorimetric method was developed for the determination of tizanidine in human plasma, urine and pharmaceutical preparations. The method is based on reaction of tizanidine with 1‐dimethylaminonaphthalene‐5‐sulphonyl chloride (dansyl chloride) in an alkaline medium to form a highly fluorescent derivative that was measured at 511 nm after excitation at 383 nm. The different experimental parameters affecting the fluorescence intensity of tizanidine was carefully studied and optimized. The fluorescence–concentration plots were rectilinear over the ranges 50–500 and 20–300 ng/mL for plasma and urine, respectively, detection limits of 1.81 and 0.54 ng/mL and quantification limits of 5.43 and 1.62 ng/mL for plasma and urine, respectively. The method presents good performance in terms of linearity, detection and quantification limits, precision, accuracy and specificity. The proposed method was successfully applied for the determination of tizanidine in pharmaceutical preparations. The results obtained were compared with a reference method, using t‐ and F‐tests. Copyright © 2011 John Wiley & Sons, Ltd.     

Pharmacokinetic evaluation of daclatasvir and ledipasvir in healthy volunteers using a validated highly sensitive spectrofluorimetric method

A simple, highly sensitive and selective spectrofluorimetric method has been developed and fully validated for the determination of daclatasvir (DAC) and ledipasvir (LED) in tablets and human plasma. The method is based on measurement of the native fluorescence in methanol at λ_em 384 nm after excitation at λ_ex 318 nm for DAC and in acetonitrile at λ_em 402 nm after excitation at λ_ex 340 nm for LED. The fluorescence intensity (FI) concentration plot was rectilinear over the ranges 1.2–12, 0.1–18 ng ml^?1 and 9–90, 1–100 ng ml^?1 with a good correlation of r = 0.9994 to r = 0.9997 in standard solution and human plasma for DAC and LED, respectively. The extraction of analytes from plasma was performed using methanol and acetonitrile as a precipitating agent with lower limit of quantification (LLOQ) of 0.1 and 1.0 ng ml^?1 for DAC and LED; respectively. The proposed method was validated according to the US Food and Drug Administration (FDA) guidelines and successfully applied for estimating the pharmacokinetic parameters of DAC and LED following oral administrations of their tablets.     

Validated spectrofluorimetric method for the determination of tamsulosin in spiked human urine,pure and pharmaceutical preparations

A novel, sensitive and selective spectrofluorimetric method was developed for the determination of tamsulosin in spiked human urine and pharmaceutical preparations. The proposed method is based on the reaction of tamsulosin with 1‐dimethylaminonaphthalene‐5‐sulfonyl chloride in carbonate buffer pH 10.5 to yield a highly fluorescent derivative. The described method was validated and the analytical parameters of linearity, limit of detection (LOD), limit of quantification (LOQ), accuracy, precision, recovery and robustness were evaluated. The proposed method showed a linear dependence of the fluorescence intensity on drug concentration over the range 1.22 × 10^‐7 to 7.35 × 10^‐6 M. LOD and LOQ were calculated as 1.07 × 10^‐7 and 3.23 × 10^‐7 M, respectively. The proposed method was successfully applied for the determination of tamsulosin in pharmaceutical preparations and the obtained results were in good agreement with those obtained using the reference method. Copyright © 2013 John Wiley & Sons, Ltd.     

New spectrofluorimetric and spectrophotometric methods for the determination of the analgesic drug,nalbuphine in pharmaceutical and biological fluids

We describe the first studies of a simple and sensitive spectrofluorimetric and spectrophotometric methods for the analysis of nalbuphine (NLB) in dosage form and biological fluids. The spectrofluorimetric method was based on the oxidation of NLB with Ce(IV) to produce Ce(III) and its fluorescence was monitored at 352 nm after excitation at 250 nm. The spectrophotometric method involves addition of a known excess of Ce(IV) to NLB in acid medium, followed by determination of residual Ce(IV) by reacting with a fixed amount of methyl orange and measuring absorbance at 510 nm. In both methods, the amount of Ce(IV) reacted corresponds to the amount of NLB and measured fluorescence or absorbance were found to increase linearly with the concentration of NLB, which are corroborated by correlation coefficients of 0.9997 and 0.9999 for spectrofluorimetric and spectrophotometric methods, respectively. Different variables affecting the reaction conditions such as concentrations of Ce(IV), type and concentration of acid medium, reaction time, temperature, and diluting solvents were carefully studied and optimized. The accuracy and precision of the methods were evaluated on intra‐day and inter‐day basis. The proposed methods were successfully applied for the determination of NLB in pharmaceutical formulation and biological samples with good recoveries. Copyright © 2012 John Wiley & Sons, Ltd.     

Micelle‐enhanced spectrofluorimetric method for quantification of entacapone in tablets and human plasma

In this paper, a simple and highly sensitive spectrofluorimetric method was developed and validated for the determination of entacapone (ETC). The proposed method is based on forming a highly fluorescent product through the reduction of ETC with Zn/HCl. The produced fluorophore exhibits strong fluorescence at λ_em 345 nm after excitation at λ_ex 240 nm. The use of fluorescence enhancers such as Tween‐80 and carboxy methyl cellulose (CMC) greatly enhanced the fluorescence of the produced fluorophore by 150% and 200%, respectively. Calibration curves showed good linear regression (r2 > 0.9998) within test ranges of 0.05–2.0 and 0.02–1.80 μg mL^?1 with lower detection limits of 1.27 × 10^?2 and 4.8 × 10^?3 μg mL^?1 and lower quantification limits of 4.21 × 10^?2 and 1.61 × 10^?2 μg mL^?1 upon using Tween‐80 and or CMC, respectively. The method was successfully applied to the analysis of ETC in its pharmaceutical formulations (either alone or in presence of other co‐formulated drugs). The results were in good agreement with those obtained using the official method. The methods were further extended to determine the drug in human plasma samples, and to study the pharmacokinetics of ETC. The paper is the first report on the spectrofluorimetric determination of entacapone.     

Validated spectrofluorimetric method for the determination of clonazepam in pharmaceutical preparations

A simple, highly sensitive and validated spectrofluorimetric method was applied in the determination of clonazepam (CLZ). The method is based on reduction of the nitro group of clonazepam with zinc/CaCl₂, and the product is then reacted with 2‐cyanoacetamide (2‐CNA) in the presence of ammonia (25%) yielding a highly fluorescent product. The produced fluorophore exhibits strong fluorescence intensity at ?_em = 383 nm after excitation at ?_ex = 333 nm. The method was rectilinear over a concentration range of 0.1–0.5 ng/mL with a limit of detection (LOD) of 0.0057 ng/mL and a limit of quantification (LOQ) of 0.017 ng/mL. The method was fully validated and successfully applied to the determination of CLZ in its tablets with a mean percentage recovery of 100.10 ± 0.75%. Method validation according to ICH Guidelines was evaluated. Statistical analysis of the results obtained using the proposed method was successfully compared with those obtained using a reference method, and there was no significance difference between the two methods in terms of accuracy and precision. Copyright © 2015 John Wiley & Sons, Ltd.     

Spectrofluorimetric determination of oseltamivir phosphate through derivatization with o‐phthalaldehyde. Application to pharmaceutical preparations with a preliminary study on spiked plasma samples

A simple and sensitive spectrofluorimetric method has been developed and validated for the determination of oseltamivir phosphate (OST) in pharmaceutical preparations. The method is based on the reaction between oseltamivir phosphate and o‐phthalaldehyde in presence of 2‐mercapto‐ethanol in borate buffer, pH 10.8, to give a highly fluorescent product measured at 450 nm after excitation at 336 nm. The different experimental parameters affecting the development and stability of the reaction product were studied and optimized. The fluorescence intensity–concentration plot is rectilinear over the range 0.05–1.0 µg/mL, with a lower detection limit of 5 ng/mL and limit of quantitation of 16 ng/mL. The developed method was successfully applied to the analysis of the drug in its commercial capsules and suspension, mean recoveries of OST were 99.97 ± 1.67% and 100.17 ± 1.18%, respectively (n = 3). Statistical comparison of the results obtained by the proposed and comparison method revealed no significant difference in the performance of the two methods regarding accuracy and precision. The proposed method was further extended to in vitro determination of the studied drug in spiked human plasma as a preliminary investigation; the mean recovery (n = 3) was 98.68 ± 5.8%. A reaction pathway was postulated. Copyright © 2012 John Wiley & Sons, Ltd.     

Highly sensitive spectrofluorimetric method for the determination of the genotoxic methylglyoxal in glycerol-containing pharmaceuticals and dietary supplements

Methylglyoxal (MGO) is a genotoxic α-dicarbonyl compound. Recently, it was found to be formed in glycerol preparations during storage through auto-oxidation. A simple fluorimetric determination of the carcinogenic degradation product of glycerol, MGO, was developed and validated. The proposed method is based on the derivatization of MGO with 4-carbomethoxybenzaldehyde (CMBA) and ammonium acetate to yield a fluorescent imidazole derivative that can be measured at 415 nm after excitation at 322 nm. The optimized conditions were determined to be 0.2 M CMBA, 1.0 M ammonium acetate and a reaction time of 40 min at 90°C using ethanol as diluting solvent. The linear range was 10.0–200.0 ng/ml. Detection and quantification limits were 2.22 and 6.72 ng/ml, respectively. The proposed method was validated according to International Council for Harmonisation (ICH) guidelines and compared with the reported method and no significant difference was found. It was successfully applied for the determination of MGO in six different glycerol-containing pharmaceutical preparations and dietary supplements.     

A novel spectrofluorimetric method for the assay of pseudoephedrine hydrochloride in pharmaceutical formulations via derivatization with 4-chloro-7-nitrobenzofurazan

A new highly sensitive and specific spectrofluorimetric method has been developed to determine a sympathomimetic drug pseudoephedrine hydrochloride. The present method was based on derivatization with 4-chloro-7-nitrobenzofurazan in phosphate buffer at pH 7.8 to produce a highly fluorescent product which was measured at 532 nm (excitation at 475 nm). Under the optimized conditions a linear relationship and good correlation was found between the fluorescence intensity and pseudoephedrine hydrochloride concentration in the range of 0.5-5 μg mL(-1). The proposed method was successfully applied to the assay of pseudoephedrine hydrochloride in commercial pharmaceutical formulations with good accuracy and precision and without interferences from common additives. Statistical comparison of the results with a well-established method showed excellent agreement and proved that there was no significant difference in the accuracy and precision. The stoichiometry of the reaction was determined and the reaction pathway was postulated.