Transition metals as catalysts of "autoxidation" reactions

Superoxide (O2-), hydrogen peroxide (H2O2), and hydroxyl radical (.OH) produced from the "autoxidation" of biomolecules, such as ascorbate, catecholamines, or thiols, have been implicated in numerous toxicities. However, the direct reaction of dioxygen with the vast majority of biomolecules, including those listed above, is spin forbidden, a condition which imposes a severe kinetic limitation on this reaction pathway. Therefore, an alternate mechanism must be invoked to explain the "autoxidations" reactions frequently reported. Transition metals are efficient catalysts of redox reactions and their reactions with dioxygen are not spin restricted. Therefore it is likely that the "autoxidation" observed for many biomolecules is, in fact, metal catalyzed. In this paper we discuss: 1) the quantum mechanic, thermodynamic, and kinetic aspects of the reactions of dioxygen with biomolecules; 2) the involvement of transition metals in biomolecule oxidation; and 3) the biological implications of metal catalyzed oxidations. We hypothesize that true autoxidation of biomolecules does not occur in biological systems, instead the "autoxidation" of biomolecules is the result of transition metals bound by the biomolecules.     

A systematic methodology for defining coarse-grained sites in large biomolecules

Coarse-grained (CG) models of biomolecules have recently attracted considerable interest because they enable the simulation of complex biological systems on length-scales and timescales that are inaccessible for atomistic molecular dynamics simulation. A CG model is defined by a map that transforms an atomically detailed configuration into a CG configuration. For CG models of relatively small biomolecules or in cases that the CG and all-atom models have similar resolution, the construction of this map is relatively straightforward and can be guided by chemical intuition. However, it is more challenging to construct a CG map when large and complex domains of biomolecules have to be represented by relatively few CG sites. This work introduces a new and systematic methodology called essential dynamics coarse-graining (ED-CG). This approach constructs a CG map of the primary sequence at a chosen resolution for an arbitrarily complex biomolecule. In particular, the resulting ED-CG method variationally determines the CG sites that reflect the essential dynamics characterized by principal component analysis of an atomistic molecular dynamics trajectory. Numerical calculations illustrate this approach for the HIV-1 CA protein dimer and ATP-bound G-actin. Importantly, since the CG sites are constructed from the primary sequence of the biomolecule, the resulting ED-CG model may be better suited to appropriately explore protein conformational space than those from other CG methods at the same degree of resolution.     

Protein carboxyl amidation increases the potential extent of protein polyethylene glycol conjugation

Chemical coupling of polyethylene glycol (PEG) to therapeutic proteins reduces their immunogenicity and prolongs their circulating half-life. The limitation of this approach is the number and distribution of sites on proteins available for PEGylation (the N terminus and the -amino group of lysines). To increase the extent of PEGylation, we have developed a method to increase the number of PEGylation sites in a model protein, recombinant methionine alpha,gamma-lyase (recombinant methioninase; rMETase), an enzyme cancer therapeutic cloned from Pseudomonas putida. rMETase was first PEGylated with methoxypolyethylene glycol succinimidyl glutarate-5000 with a molar ratio of PEG:rMETase of 15:1. The carboxyl groups of the initially PEGylated protein were then conjugated with diaminobutane, resulting in carboxyl amidation. This reaction was catalyzed by 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide, a water-soluble carbodiimide. The steric hindrance provided by the PEG chains already coupled to the protein prevented cross-linking between rMETase molecules during the carboxyl amidation reaction. The carboxyl-amidated PEGylated rMETase was hyper-PEGylated at a molar ratio of PEG to PEG-rMETase of 60:1. Biochemical analysis indicated that 13 PEG chains were coupled to each subunit of rMETase after hyper-PEGylation compared with 6-8 PEG chains attached to the non-carboxyl-amidated PEG-rMETase. Approximately 15-20% of the non-PEGylated rMETase activity was retained in the hyper-PEGylated molecule. Immunogenicity of the hyper-PEG-rMETase was significantly reduced relative to PEG-rMETase and rMETase. Initial results suggest that hyper-PEGylation may become a new strategy for PEGylation of protein biologics.     

Interpreting correlated motions using normal mode analysis

With the increased popularity of normal mode analyses in structural biology, it is important to carefully consider how to best utilize the results for gaining biological insights without over interpretation. The discussion in this article argues that for the purpose of identifying correlated motions in biomolecules, a case separate from concomitant conformational changes of structural motifs, it is generally important to use a large number of normal modes. This is illustrated through three increasingly complex examples. The simplest case includes two bilinearly coupled harmonic oscillators and serves as a straightforward problem where the important considerations are explicit and transparent. The argument is then generalized to include a system of N-coupled harmonic oscillators and finally to a realistic biomolecule. Although a small number of normal modes are useful for probing structural flexibility, it is clear that a much larger number of modes are required for properly investigating correlated motions in biomolecules.     

Mono-, bi-, or tridentate ligands? The labeling of peptides with 99mTc-carbonyls

The labeling of targeting peptides with (99m)Tc is a useful concept for the diagnosis of various diseases such as cancer. Although in research for at least one decade, only a very few radiopharmaceuticals based on peptides are in clinical use. The difficulty of labeling, and the resulting authenticity of the new vector, is largely responsible for this observation. In this overview, we present an alternate strategy based on the organometallic fac-[(99m)Tc(CO)(3)](+) core for introducing (99m)Tc in biomolecules in general and in peptides in particular. The three coordination sites available in [(99m)Tc(OH(2))(3)(CO)(3)](+) can be occupied with many different ligand types, pendant to a biomolecule and serving as the anchor group for labeling. This makes the appropriate choice difficult. We intend to present some useful concepts for the practice. Monodentate chelators are robust but bear the risk of multiple binding of biomolecules. Coordinating a bidentate ligand of choice prior to labeling bypasses this problem and enables a systematic drug discovery by variation of the bidentate ligand. Bidentate ligands attached to the biomolecule are stronger but occasionally require protection of the remaining site by a monodentate ligand. Both approaches refer to a mixed-ligand [2+1] approach. Tridentate chelators are the most efficient but need some protecting group chemistry in order to achieve selectivity for the coupling process. Examples with cysteine and histidine are presented. This article aims to provide versatile and reproducible approaches for the labeling of biomolecules while not focusing on particular systems. It should be left to the readers to derive a strategy for their own peptide.     

Preservation of key biomolecules in the fossil record: current knowledge and future challenges

We have developed a model based on the analyses of modern and Pleistocene eggshells and mammalian bones which can be used to understand the preservation of amino acids and other important biomolecules such as DNA in fossil specimens. The model is based on the following series of diagenetic reactions and processes involving amino acids: the hydrolysis of proteins and the subsequent loss of hydrolysis products from the fossil matrix with increasing geologic age; the racemization of amino acids which produces totally racemized amino acids in 10(5)-10(6) years in most environments on the Earth; the introduction of contaminants into the fossil that lowers the enantiomeric (D:L) ratios produced via racemization; and the condensation reactions between amino acids, as well as other compounds with primary amino groups, and sugars which yield humic acid-like polymers. This model was used to evaluate whether useful amino acid and DNA sequence information is preserved in a variety of human, amber-entombed insect and dinosaur specimens. Most skeletal remains of evolutionary interest with respect to the origin of modern humans are unlikely to preserve useful biomolecular information although those from high latitude sites may be an exception. Amber-entombed insects contain well-preserved unracemized amino acids, apparently because of the anhydrous nature of the amber matrix, and thus may contain DNA fragments which have retained meaningful genetic information. Dinosaur specimens contain mainly exogenous amino acids, although traces of endogenous amino acids may be present in some cases. Future ancient biomolecule research which takes advantage of new methologies involving, for example, humic acid cleaving reagents and microchip-based DNA-protein detection and sequencing, along with investigations of very slow biomolecule diagenetic reactions such as the racemization of isoleucine at the beta-carbon, will lead to further enhancements of our understanding of biomolecule preservation in the fossil record.     

Surface manipulation of biomolecules for cell microarray applications

Many biological events, such as cellular communication, antigen recognition, tissue repair and DNA linear transfer, are intimately associated with biomolecule interactions at the solid-liquid interface. To facilitate the study and use of these biological events for biodevice and biomaterial applications, a sound understanding of how biomolecules behave at interfaces and a concomitant ability to manipulate biomolecules spatially and temporally at surfaces is required. This is particularly true for cell microarray applications, where a range of biological processes must be duly controlled to maximize the efficiency and throughput of these devices. Of particular interest are transfected-cell microarrays (TCMs), which significantly widen the scope of microarray genomic analysis by enabling the high-throughput analysis of gene function within living cells. This article reviews this current research focus, discussing fundamental and applied research into the spatial and temporal surface manipulation of DNA, proteins and other biomolecules and the implications of this work for TCMs.     

Proportions with extraneous variance: two dependent samples.

Data which appear to be binomial proportions sometimes exhibit heterogeneity which results in greater variation than would be exhibited under the binomial distribution. Previous work by the author (Kleinman [1973]) in which estimates of the heterogeneity variances are obtained and used in weighting is extended to the case of comparing means in two dependent samples. The resulting empirical weighting estimates are asymptotically equivalent to exact least squares estimates and Monte Carlo studies for sample size 10 indicate high efficiency relative to exact least squares estimates.     

The number distribution for involved lymph nodes in cancer

The number of involved lymph nodes exhibits considerable heterogeneity within populations. Here, the implications of population heterogeneity are explored with respect to the kinematics of nodal metastases. Data from the National Cancer Institute's Surveillance, Epidemiology, and End Results program for 224656 breast, 12404 gastric, 18015 rectal, 4117 cervical and 2443 laryngeal cancers as well as 9118 melanomas were used to construct frequency distributions for the number of involved nodes which were then fitted to the negative binomial distribution. The negative binomial distribution described the heterogeneity in nodal involvement well. The patterns of nodal involvement can be explained by either of two models: one where involved nodes could seed further nodal metastases, the other where the number of nodal metastases in any individual was randomly distributed, with the deviations between patients accounted for by population heterogeneity. Since the number of sampled nodes similarly approximated a negative binomial distribution, random involvement with superimposed population heterogeneity would more credibly explain both sets of observations.     

Micropatterning of biomolecules on glass surfaces modified with various functional groups using photoactivatable biotin

Biomolecule patterning by photolithographic methods has considerable advantages because a large number of different biomolecules can be assembled on a spatial area by a combinatorial method and complex biomolecule patterning can be created in situ in closed environments such as microfluidic channels. Here, a photobiotin was used as the photoactivatable reagent to create patterned arrays of biomolecules. The variability of photobiotin deposition on glass substrates modified with a variety of materials having carboxyl, lysine, aldehyde, amine groups, and BSA (bovine serum albumin) was characterized by subsequent derivatization with Cy3-labeled streptavidin. The fluorescence images of the photobiotin patterned glass surfaces showed that the BSA/aldehyde-coated glass could be considered as the most appropriate substrate to immobilize photobiotin, in view of the homogeneous immobilization of biomolecules with high density in defined regions and the reduction of nonspecific binding to the surface. In streptavidin equilibrium adsorption assays, the maximum amount of streptavidin-Cy3 bound to the BSA/aldehyde-coated glass surface continued to rise with increasing streptavidin-Cy3 concentration until 12.0 microg/mL was reached and the surface then became saturated. Also, a line array of biotin-labeled single-strand probe DNAs was created on the BSA/aldehyde-coated glass by photolysis of photobiotin through a slit-type mask and biotin/streptavidin/biotin chemistry, extended to a quantitative measurement of the concentrations of target DNA. The results of target DNA analysis showed linearity over a wide range from 0.5 ng/mL to 5 microg/mL and were reproducible.     

Recent advances in exploiting ionic liquids for biomolecules: Solubility,stability and applications

The technological utility of biomolecules (e.g. proteins, enzymes and DNA) can be significantly enhanced by combining them with ionic liquids (ILs) – potentially attractive ”green“ and ”designer“ solvents – rather than using in conventional organic solvents or water. In recent years, ILs have been used as solvents, cosolvents, and reagents for biocatalysis, biotransformation, protein preservation and stabilization, DNA solubilization and stabilization, and other biomolecule‐based applications. Using ILs can dramatically enhance the structural and chemical stability of proteins, DNA, and enzymes. This article reviews the recent technological developments of ILs in protein‐, enzyme‐, and DNA‐based applications. We discuss the different routes to increase biomolecule stability and activity in ILs, and the design of biomolecule‐friendly ILs that can dissolve biomolecules with minimum alteration to their structure. This information will be helpful to design IL‐based processes in biotechnology and the biological sciences that can serve as novel and selective processes for enzymatic reactions, protein and DNA stability, and other biomolecule‐based applications.     

The micronucleus test: statistical design and analysis.

Alternative statistical procedures are discussed which may be employed to compare the incidences among treatment groups of micronucleated polychromatic and normochromatic erythrocytes and their ratios. Comparison of incidences of micronucleated polychromatic erythrocytes using a sequential sampling strategy based on the negative binomial distribution is shown to require fewer animals for the same sensitivity of test than a similar procedure based on the binomial distribution. The sequential test is superior, both in power and number of animals required, to an alternative 1-stage test based on the same distribution. The procedure described permits the investigator to optimize the number of animals in each test group and the number of cells counted per animal to detect a predetermined increase in the incidence of micronucleated cells over that observed in the control population within chosen limits of type I and type II error. An alternative sequential approach based on the binomial distribution is presented, which is applicable when the number of cells analyzed per animal is variable.     

DOTA derivatives for site-specific biomolecule-modification via click chemistry: synthesis and comparison of reaction characteristics

Due to the high stability of its complexes with many M(2+) and M(3+)-ions, DOTA (1,4,7,10-tetraazacyclododecane-N,N',N″,N?-tetraacetic acid) is the most commonly used chelator for the derivatization and radiolabeling of bioactive molecules. Most of the currently used DOTA derivatives comprise amine-reactive functionalities, limiting their application to the derivatization of fully protected molecules or otherwise resulting in randomly distributed conjugation sites of undefined number. Click chemistry reactions are a valuable alternative to this unspecific conjugation as they proceed efficiently and chemoselectively under mild conditions allowing a site-specific derivatization of unprotected biomolecules. In this work, we describe straightforward syntheses of DOTA derivatives containing thiol, maleimide, aminooxy, aldehyde, alkyne, and azide functionalities, amenable to the currently most often used click chemistry reactions. Furthermore, the efficiency of the respective click reactions introducing DOTA into bioactive molecules was investigated. For each of the synthesized DOTA synthons, the site-specific and efficient conjugation to Tyr(3)-octreotate could be shown. Among these, the addition and oxime formation reactions proceeded fast and without side reactions, giving the products in high yields of 64-83% after purification. The copper-catalyzed triazole formation reactions produced some side-products, giving the desired products in lower, but still reasonable overall yields of 19-25%. All synthesized peptide-DOTA-conjugates were labeled with (68)Ga in high radiochemical yields of 96-99% and high specific activities providing compounds of high purity, demonstrating the applicability of all synthons for biomolecule modification and subsequent radiolabeling.     

Oviposition pattern of phytophagous insects: on the importance of host population heterogeneity

Frequency distributions of insect immatures per host are often fitted to contagious distributions, such as the negative binomial, to deduce oviposition pattern. However, different mechanisms can be involved for each theoretical distribution and additional biological information is needed to correctly interpret the fits. We chose the chestnut weevil Curculio elephas, a pest of the European chestnut Castanea sativa, as a model to illustrate the difficulties of inferring oviposition pattern from fits to theoretical distributions and from the variance/mean ratio. From field studies over 13–16 years, we show that 20 out of the 31 yearly distributions available fit a negative binomial and 25 a zero-inflated Poisson (ZIP). No distribution fits a Poisson distribution. The ZIP distribution assumes heterogeneity within the fruit population. There are two categories of host: the first comprises chestnuts unsuitable for weevil oviposition or in excess relative to the number of weevil females, and the second comprises suitable fruits in which oviposition behavior is random. Our results confirm this host heterogeneity. According to the ZIP distribution, the first category of hosts includes on average 74% of the chestnuts. A negative binomial distribution may be generated by either true or false contagion. We show that neither interference between weevil females, nor spatial variation in the infestation rate exist. Consequently, the observed distributions of immatures are not the result of false contagion. Nevertheless, we cannot totally exlude true contagion of immatures. In this paper we discuss the difficulty of testing true contagion in natural conditions. These results show that we cannot systematically conclude in favour of contagion when fitting a distribution such as the negative binomial or when a variance/mean ratio is higher than unity. Received: 22 September 1997 / Accepted: 15 December 1997     

Influence of parental density on the distribution pattern of eggs in the common cabbage butterfly,Pieris rapae crucivora

To investigate the relation between the distribution pattern of eggs and the parental density in the common cabbage butterfly, Pieris rapae crucivora, the countings of egg number per plant were made on both cabbage plants cultivated in the farm and planted in the net house in which the female butterflies were released at various densities. The frequency distribution of eggs fits well to the negative binomial excepting the cases where they agree withPoisson series, and the degree of aggregation expressed as the reciprocal of the parameter, 1/k, tends to decrease as the egg or parental density increases. At the same parental density, however, the distribution of eggs can be described by the negative binomial with a common parameter, k_c, regardless of the difference in the density of laid eggs. In the case where a single female butterfly lays eggs, the spatial pattern of egg distribution is always lean, while its frequencies conform toPoisson or the negative binomial series. This lean changes toward patchy with increasing the parental density. From these results, it is concluded that the degree of aggregation in the distribution of eggs decreases with the increase of the parental density.     

Cold-plasma modification of oxide surfaces for covalent biomolecule attachment

While many processes have been developed to modify the surface of glass and other oxides for biomolecule attachment, they rely primarily upon wet chemistry and are costly and time-consuming. We describe a process that uses a cold plasma and a subsequent in vacuo vapor-phase reaction to terminate a variety of oxide surfaces with epoxide chemical groups. These epoxide groups can react with amine-containing biomolecules, such as proteins and modified oligonucleotides, to form strong covalent linkages between the biomolecules and the treated surface. The use of a plasma activation step followed by an in vacuo vapor-phase reaction allows for the precise control of surface functional groups, rather than the mixture of functionalities normally produced. By maintaining the samples under vacuum throughout the process, adsorption of contaminants is effectively eliminated. This process modifies a range of different oxide surfaces, is fast, consumes a minimal amount of reagents, and produces attachment densities for bound biomolecules that are comparable to or better than commercially available substrates.     

Nicotinic acetylcholine receptor probed with a photoactivatable agonist: improved labeling specificity by addition of CeIV/glutathione. Extension to laser flash photolabeling.

The molecular structure of Torpedo marmorata acetylcholine binding sites has been investigated previously by photoaffinity labeling. However, besides the nicotine molecule [Middleton et al. (1991) Biochemistry 30, 6987-6997], all other photosensitive probes used for this purpose interacted only with closed receptor states. In the perspective of mapping the functional activated state, we synthesized and developed a new photoactivatable agonist of nAChR capable of alkylation of the acetylcholine (ACh) binding sites, as reported previously [Kotzyba-Hibert et al. (1997) Bioconjugate Chem. 8, 472-480]. Here, we describe the setup of experimental conditions that were made in order to optimize the photolabeling reaction and in particular its specificity. We found that subsequent addition of the oxidant ceric ion (CeIV) and reduced glutathione before the photolabeling step lowered considerably nonspecific labeling (over 90% protection with d-tubocurarine) without affecting the binding properties of the ACh binding sites. As a consequence, irradiation at 360 nm for 20 min in these new conditions gave satisfactory coupling yields (7.5%). A general mechanism was proposed to explain the successive reactions occurring and their drastic effect on the specificity of the labeling reaction. Last, these incubation conditions can be extended to nanosecond pulsed laser photolysis leading to the same specific photoincorporation as for usual irradiations (8.5% coupling yield of ACh binding sites, 77% protection with carbamylcholine). Laser flash photocoupling of a diazocyclohexadienoyl probe on nAChR was achieved for the first time. Taken together, these data indicate that future investigation of the molecular dynamics of allosteric transitions occurring at the activated ACh binding sites should be possible.     

Carbohydrate and protein immobilization onto solid surfaces by sequential Diels-Alder and azide-alkyne cycloadditions

We demonstrate the applicability of sequential Diels-Alder and azide-alkyne [3 + 2] cycloaddition reactions (click chemistry) for the immobilization of carbohydrates and proteins onto a solid surface. An alpha,omega-poly(ethylene glycol) (PEG) linker carrying alkyne and cyclodiene terminal groups was synthesized and immobilized onto an N-(epsilon-maleimidocaproyl) (EMC)-functionalized glass slide via an aqueous Diels-Alder reaction. In the process, an alkyne-terminated PEGylated surface was provided for the conjugation of azide-containing biomolecules via click chemistry, which proceeded to completion at low temperature and in aqueous solvent. As anticipated, alkyne, azide, cyclodiene, and EMC are independently stable and do not react with common organic reagents nor functional groups in biomolecules. Given an appropriate PEG linker, sequential Diels-Alder and azide-alkyne [3 + 2] cycloaddition reactions provide an effective strategy for the immobilization of a wide range of functionally complex substances onto solid surfaces.     

Conjugating Enzymes Involved in Xenobiotic Metabolism of Organic Xenobiotics in Plants

Phytoremediation of organic pollutants has become a topic of great interest in many countries due to the increasing number of recorded spill sites. When applying plant remediation techniques to unknown pollutant mixtures, information on the uptake rates as well as on the final fate of the compounds is generally lacking. A range of compounds are easily taken up by plants, whereas others may stay motionless and recalcitrant in the soil or sediment. Uptake is a necessary prerequisite for close contact between the pollutant and the detoxifying enzymes of plants that are localized in the cytosol of living cells. The presence and activity of these enzymes is crucial for a potential metabolization and further degradation of the chemicals under consideration. Conjugation to biomolecules is regarded as a beneficial detoxification reaction. The present review summarizes several prerequisites for pollutant uptake and discusses information on conjugating detoxification reactions. The final fate of compounds is critically discussed and perspectives for phytoremediation are given.