L‐Cysteine capped CdTe–CdS core–shell quantum dots: preparation,characterization and immuno‐labeling of HeLa cells

Functionalized CdTe–CdS core–shell quantum dots (QDs) were synthesized in aqueous solution via water‐bathing combined hydrothermal method using L‐cysteine (L‐Cys) as a stabilizer. This method possesses both the advantages of water‐bathing and hydrothermal methods for preparing high‐quality QDs with markedly reduced synthesis time, and better stability than a lone hydrothermal method. The QDs were characterized by transmission electronic microscopy and powder X‐ray diffraction and X‐ray photoelectron spectroscopy. The CdTe–CdS QDs with core–shell structure showed both enhanced fluorescence and better photo stability than nude CdTe QDs. After conjugating with antibody rabbit anti‐CEACAM8 (CD67), the as‐prepared l ‐Cys capped CdTe–CdS QDs were successfully used as fluorescent probes for the direct immuno‐labeling and imaging of HeLa cells. It was indicated that this kind of QD would have application potential in bio‐labeling and cell imaging. Copyright © 2009 John Wiley & Sons, Ltd.     

Water‐soluble mercaptoundecanoic acid (MUA)‐coated CdTe quantum dots: one‐step microwave synthesis,characterization and cancer cell imaging

ABSTRACT: In this study, a one‐step approach for aqueous synthesis of highly luminescent semiconductors, CdTe quantum dots (QDs), using long‐chain thiols‐mercaptoundecanoic acid (MUA) as surface ligand, was developed in a microwave irradiation system. The synthetic conditions were systematically investigated. The as‐prepared MUA‐coated QDs were characterized by various spectroscopy techniques, transmission electron microscopy (TEM) and X‐ray powder diffraction (XRD). The experimental results document that MUA‐coated CdTe QDs have small diameter, good stability, high luminescence and long lifetime. Particularly, it was confirmed, using fluorescence correlation spectroscopy (FCS) that, compared with other ligand, MUA formed a thicker ligand layer on the QD surfaces, which will help their stability and conjugation with biomolecules. Furthermore, MUA‐coated QDs were successfully used for HeLa cell imaging. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis of near‐infrared‐emitting CdTeSe and CdZnTeSe quantum dots

We exploited the synthesis of near‐infrared (NIR) emitting ternary‐alloyed CdTeSe and quaternary‐alloyed CdZnTeSe quantum dots (QDs) with rod and tetrapod morphologies, which have tunable emission in the NIR electromagnetic spectrum. The morphologies of the QDs depended strongly on their growth kinetics, probably due to the coordinating ligands used in the preparation. Using oleic acid, stearic acid and hexadecylamine as ligands and keeping the same reaction parameters, QDs with tetrapod and rod morphologies were created. Not only had the capping ligands influenced the morphologies of QDs, but also they influenced the optical properties of QDs. The molar ratios of Cd/Zn and Te/Se upon preparation were adjusted for investigating the effect of composition on the properties of resulting QDs. By varying the composition of QDs, the photoluminescence (PL) wavelength of QDs was tuned from 650 nm to 800 nm. To enhance PL efficiency and stability, QDs were coated with a CdZnS shell. As NIR PL has numerous advantages in biological imaging detection, these QDs hold great potential for application. Copyright © 2012 John Wiley & Sons, Ltd.     

Hydrothermal synthesis for high‐quality glutathione‐capped CdxZn1 – xSe and CdxZn1 – xSe/ZnS alloyed quantum dots and its application in Hg(II) sensing

High‐quality Cd_xZn_{1 – x}Se and Cd_xZn_{1 – x}Se/ZnS core/shell quantum dots (QDs) emitting in the violet–green spectral range have been successfully prepared using hydrothermal methods. The obtained aqueous Cd_xZn_{1 – x}Se and Cd_xZn_{1 – x}Se/ZnS QDs exhibit a tunable photoluminescence (PL) emission (from 433.5 nm to 501.2 nm) and a favorable narrow photoluminescence bandwidth [full width at half maximum (FWHM): 30–42 nm]. After coating with a ZnS shell, the quantum yield increases from 40.2% to 48.1%. These Cd_xZn_{1 – x}Se and Cd_xZn_{1 – x}Se/ZnS QDs were characterized by transmission electron microscopy, X‐ray diffraction, X‐ray photoelectron spectroscopy and Fourier transform infrared (FTIR) spectroscopy. To further understand the alloying mechanism, the growth kinetics of Cd_xZn_{1 – x}Se were investigated through measuring the fluorescence spectra and X‐ray diffraction spectra at different growth intervals. The results demonstrate that the inverted ZnSe/CdSe core/shell structure is formed initially after the injection of Cd²⁺. With further heating, the core/shell structured ZnSe/CdSe is transformed into alloyed Cd_xZn_{1 – x}Se QDs with the diffusion of Cd²⁺ into ZnSe matrices. With increasing the reaction temperature from 100 °C to 180 °C, the duration time of the alloying process decreases from 210 min to 20 min. In addition, the cytotoxicity of Cd_xZn_{1 – x}Se and Cd_xZn_{1 – x}Se/ZnS QDs were investigated. The results indicate that the as‐prepared Cd_xZn_{1 – x}Se/ZnS QDs have low cytotoxicity, which makes them a promising probe for cell imaging. Finally, the as‐prepared Cd_xZn_{1 – x}Se/ZnS QDs were utilized to ultrasensitively and selectively detect Hg²⁺ ions with a low detection limit (1.8 nM).     

d‐penicillamine capped cadmium telluride quantum dots as a novel fluorometric sensor of copper(II)

d ‐penicillamine‐capped cadmium telluride quantum dots (DPA‐capped CdTe QDs) were synthesized as the new fluorescent semiconductor nanocrystal in aqueous solution. Fourier transmission infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, ultraviolet‐visible and photoluminescence spectroscopy were used for characterization of the QDs. Based on the quenching effect of Cu²⁺ ions on the fluorescence intensity of DPA‐capped CdTe QDs, a new fluorometric sensor for copper(II) detection was developed that showed good linearity over the concentration range 5 × 10^–9–3 × 10^–6 m with the detection limit 0.4 × 10^–9 m . Owing to the strong affinity of the DPA to copper(II), the sensor showed appropriate selectivity for copper(II) compared with conventional QDs. The DPA‐capped CdTe QDs was successfully applied for determination of Cu²⁺ concentration in river, well and tap waters with satisfactory results. Copyright © 2013 John Wiley & Sons, Ltd.     

Characterization and cancer cell targeted imaging properties of human antivascular endothelial growth factor monoclonal antibody conjugated CdTe/ZnS quantum dots

High luminescence quantum yield water‐soluble CdTe/ZnS core/shell quantum dots (QDs) stabilized with thioglycolic acid were synthesized. QDs were chemically coupled to fully humanized antivascular endothelial growth factor₁₆₅ monoclonal antibodies to produce fluorescent probes. These probes can be used to assay the biological affinity of the antibody. The properties of QDs conjugated to an antibody were characterized by ultraviolet and visible spectrophotometry, fluorescent spectrophotometry, sodium dodecyl sulfate–polyacrylamide gel electrophoresis, transmission electron microscopy and fluorescence microscopy. Cell‐targeted imaging was performed in human breast cancer cell lines. The cytotoxicity of bare QDs and fluorescent probes was evaluated in the MCF‐7 cells with an MTT viability assay. The results proved that CdTe/ZnS QD–monoclonal antibody nanoprobes had been successfully prepared with excellent spectral properties in target detections. Surface modification by ZnS shell could mitigate the cytotoxicity of cadmium‐based QDs. The therapeutic effects of antivascular endothelial growth factor antibodies towards cultured human cancer cells were confirmed by MTT assay. Copyright © 2014 John Wiley & Sons, Ltd.     

Aqueous synthesis of CdTe/CdS/ZnS quantum dots and their optical and chemical properties

In this paper, we described a strategy for synthesis of thiol‐coated CdTe/CdS/ZnS (core–shell–shell) quantum dots (QDs) via aqueous synthesis approach. The synthesis conditions were systematically optimized, which included the size of CdTe core, the refluxing time and the number of monolayers and the ligands, and then the chemical and optical properties of the as‐prepared products were investigated. We found that the mercaptopropionic acid (MPA)‐coated CdTe/CdS/ZnS QDs presented highly photoluminescent quantum yields (PL QYs), good photostability and chemical stability, good salt tolerance and pH tolerance and favorable biocompatibility. The characterization of high‐resolution transmission electron microscopy (HRTEM), X‐ray powder diffraction (XRD) and fluorescence correlation spectroscopy (FCS) showed that the CdTe/CdS/ZnS QDs had good monodispersity and crystal structure. The fluorescence life time spectra demonstrated that CdTe/CdS/ZnS QDs had a longer lifetime in contrast to fluorescent dyes and CdTe QDs. Furthermore, the MPA‐stabilized CdTe/CdS/ZnS QDs were applied for the imaging of cells. Compared with current synthesis methods, our synthesis approach was reproducible and simple, and the reaction conditions were mild. More importantly, our method was cost‐effective, and was very suitable for large‐scale synthesis of CdTe/CdS/ZnS QDs for future applications. Copyright © 2010 John Wiley & Sons, Ltd.     

High quantum yield and well‐dispersed quantum dots luminescent composite through sodium carboxymethyl starch

It is a challenging task to prepare well‐dispersed and highly luminescent quantum dots (QDs) powder and a new strategy is reported in this article. Sodium carboxymethyl starch (CMS‐Na) was employed in this work to prepare the QDs–starch composite. Ultraviolet (UV) light shows that the blank starches had no fluorescence, while the QDs‐starches were highly luminescent. Scanning electron microscopy (SEM) observation shows that the QDs–starch composite has the typical particle morphology with the diameter around 200 nm. Energy dispersive X‐ray spectroscopy (EDX) results show that there are intensive tellurium (Te) and cadmium (Cd) element signals. Combined fluorescent lifetime and steady‐state spectrometer show that the QDs–starch quantum yields (QYs) increase when the QDs loading increases from 1 × 10^?6 mol/g to 2 × 10^?6 mol/g, but when the loadings further increase, the QYs decrease slightly. For the red colour (λ_em = 660 nm) QDs, the QYs can reach to as high as 28.2%, and for the other colour QDs they can also have the QYs above 22%. Time‐resolved photobleaching experiments show that the fluorescent QDs–starch composite has a half‐decay time of 40.23 s. These results indicate that the CMS‐Na is a promising QDs dispersant to obtain high QY QD composites.     

Solid‐phase synthesis of graphene quantum dots from the food additive citric acid under microwave irradiation and their use in live‐cell imaging

The work demonstrated that solid citric acid, one of the most common food additives, can be converted to graphene quantum dots (GQDs) under microwave heating. The as‐prepared GQDs were further characterized by various analytical techniques like transmission electron microscopy, atomic force microscopy, X‐ray diffraction, X–ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, fluorescence and UV‐visible spectroscopy. Cytotoxicity of the GQDs was evaluated using HeLa cells. The result showed that the GQDs almost did not exhibit cytotoxicity at concentrations as high as 1000 µg mL^–1. In addition, it was found that the GQDs showed good solubility, excellent photostability, and excitation‐dependent multicolor photoluminescence. Subsequently, the multicolor GQDs were successfully used as a fluorescence light‐up probe for live‐cell imaging. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of ZnSe and ZnSe:Cu quantum dots by a room temperature photochemical (UV‐assisted) approach using Na2SeO3 as Se source and investigating optical properties

In this study, ZnSe and ZnSe:Cu quantum dots (QDs) were synthesized using Na₂SeO₃ as the Se source by a rapid and room temperature photochemical (UV‐assisted) approach. Thioglycolic acid (TGA) was employed as the capping agent and UV illumination activated the chemical reactions. Synthesized QDs were successfully characterized using X‐ray diffraction (XRD), transmission electron microscopy (TEM), photoluminescence (PL) and UV–visible (UV–vis) spectroscopy, Fourier transform‐infrared (FT‐IR), and energy dispersive X‐ray spectroscopy (EDX). XRD analysis demonstrated the cubic zinc blend phase QDs. TEM images indicated that round‐shaped particles were formed, most of which had a diameter of about 4 nm. The band gap of the ZnSe QDs was higher than that for ZnSe in bulk. PL spectra indicated an emission with three peaks related to the excitonic, surface trap states and deep level (DL) states. The band gap and QD emission were tunable only by UV illumination time during synthesis. ZnSe:Cu showed green emission due to transition of electrons from the Conduction band (CB) or surface trap states to the ²T₂ acceptor levels of Cu²⁺. The emission was increased by increasing the Cu²⁺ ion concentration, such that the optimal value of PL intensity was obtained for the nominal mole ratio of Cu:Zn 1.5%.     

Synthesis of carbon‐based quantum dots from starch extracts: Optical investigations

Carbon‐based quantum dots (C‐QDs) were synthesized through microwave‐assisted carbonization of an aqueous starch suspension mediated by sulphuric and phosphoric acids. The as‐prepared C‐QDs showed blue, green and yellow luminescence without the addition of any surface‐passivating agent. The C‐QDs were further analyzed by UV?vis spectroscopy to measure the optical response of the organic compound. The energy gaps revealed narrow sizing of C‐QDs in the semiconductor range. The optical refractive index and dielectric constant were investigated. The C‐QDs size distribution was characterized. The results suggested an easy route to the large scale production of C‐QDs materials.     

Construction of photodynamic‐effect immunofluorescence probes by a complex of quantum dots,immunoglobulin G and chlorin e6 and their application in HepG2 cell killing

In this study, tri‐functional immunofluorescent probes (Ce6–IgG–QDs) based on covalent combinations of quantum dots (QDs), immunoglobulin G (IgG) and chlorin e6 (Ce6) were developed and their photodynamic ability to induce the death of cancer cells was demonstrated. Strategically, one type of second‐generation photosensitizer, Ce6, was first coupled with anti‐IgG antibody using the EDC/NHS cross‐linking method to construct the photosensitive immunoconjugate Ce6–IgG. Then, a complex of Ce6–IgG–QDs immunofluorescent probes was obtained in succession by covalently coupling Ce6–IgG to water soluble CdTe QDs. The as‐manufactured Ce6–IgG–QDs maintained the bio‐activities of both the antigen–antibody‐based tumour targeting effects of IgG and the photodynamic‐related anticancer activities of Ce6. By way of polyclonal antibody interaction with rabbit anti‐human epidermal growth factor receptor (anti‐EGFR antibody, N‐terminus), Ce6–IgG–QDs were labelled indirectly onto the surface of human hepatocarcinoma (HepG2) cells in cell recognition and killing experiments. The results indicated that the Ce6–IgG–QDs probes have excellent tumour cell selectivity and higher photosensitivity in photodynamic therapy (PDT) compared with Ce6 alone, due to their antibody‐based specific recognition and location of HepG2 cells and the photodynamic effects of Ce6 killed cells based on efficient fluorescence resonance energy transfer between QDs and Ce6. Copyright © 2015 John Wiley & Sons, Ltd.     

Aqueous synthesis of highly stable CdTe/ZnS Core/Shell quantum dots for bioimaging

In this work, we report the synthesis, characterization and biological application of highly stable CdTe/ZnS (cadmium tellurite/zinc sulphide) Core/Shell (CS) quantum dots (QDs) capped with mercaptosuccinic acid (MSA). The CS QDs were synthesized using a simple one‐pot aqueous method. The synthesized CdTe/ZnS CS QDs were found to exhibit excellent stability even 100 days after preparation and also showed better photoluminescence quantum yield (PLQY) of about 50% compared with that of only CdTe QDs which was nearly 12%. The formation of the CdTe/ZnS CS was confirmed by high‐resolution transmission electron microscopy (HR‐TEM), and Fourier transform infra‐red (FTIR) and X‐ray diffraction (XRD) analyses. Further, on extending our study towards bioimaging of E. coli cells using the QDs samples, we found that CdTe/ZnS CS QDs showed better results compared with CdTe QDs.     

Highly luminescent hybrid SiO2‐coated CdTe quantum dots: synthesis and properties

Novel hybrid SiO₂‐coated CdTe quantum dots (QDs) were created using CdTe QDs coated with a hybrid SiO₂ shell containing Cd²⁺ ions and a sulfur source via a sol–gel process in aqueous solution. Aqueous CdTe QDs with tunable emitting color created through a reaction between cadmium chloride and sodium hydrogen telluride was used as cores for the preparation of hybrid SiO₂‐coated CdTe QDs. In our experiments we found that the surface state of the cores and preparation conditions that affect the formation of the hybrid SiO₂ shell also greatly affect photoluminescence of the hybrid SiO₂‐coated CdTe QDs. The generation of CdS‐like clusters in the vicinity of the CdTe QDs, caused the quantum size effect of the QDs to be greatly reduced, which changes photoluminescence properties of the hybrid QDs fundamentally. Namely, the novel hybrid SiO₂ shell played an important role in generating a series of specific optical properties. In addition, the novel hybrid SiO₂ shell can be created if no CdTe QD is added. In order to gain an insight into the inter structure of the hybrid shell, we characterized the hybrid SiO₂‐coated CdTe QDs using X‐ray diffraction analysis and discuss the formation mechanism of such a hybrid structure. This work is significant because the novel hybrid SiO₂‐coated CdTe QDs with its excellent properties can be used in many applications, such as biolabeling and optoelectronic devices. Copyright © 2013 John Wiley & Sons, Ltd.     

Determination of naphazoline hydrochloride in biological and pharmaceutical samples by a quantum dot‐assisted chemiluminescence system using response‐surface methodology

A simple and highly sensitive chemiluminescence (CL) method is reported for the determination of naphazoline hydrochloride (NH). It was found that the weak CL from the reaction of luminol and KIO₄ in an alkaline medium could be highly amplified by cysteine‐capped cadmium telluride quantum dots (QDs) and the enhanced CL was effectively quenched by NH and this finding was utilized as a basis for the determination of NH. The QDs were synthesized in aqueous medium and characterized by X‐ray diffraction (XRD), transmission electron microscopy (TEM), and UV‐vis and photoluminescence spectroscopy. A possible mechanism was proposed for the CL system based on radical identification experiments, along with CL spectrum of the system. The experimental parameters were optimized by the reliable response surface methodology (RSM). Under the optimized experimental conditions, the proposed method allowed the determination of NH over the range of 5.0 × 10^‐10–2.0 × 10^‐7 mol/L (r² = 0.9993, n = 10). The precision (RSD%) of the method, obtained from five replicate determinations of 2.0 and 150 nmol/L NH, was found to be 1.0% and 1.3%, respectively. The method was successfully applied to the determination of NH in pharmaceutical formulations and human urine and serum samples with results corroborated with the aid of those obtained from a standard method. Copyright © 2014 John Wiley & Sons, Ltd.     

Ultrasensitive detection of glibenclamide based on its enhancing effect on the fluorescence emission of CdTe quantum dots

Glibenclamide (GB), as a sulfonylurea‐based medication is commonly prescribed for the treatment of type 2 diabetes. Due to its increasing consumption, there is a need to develop a simple, fast, and reliable detection method to follow its concentration in pharmaceutical and biological samples. Herein, a novel fluorometric method is developed for the sensitive measurement of GB. The method is based on the enhancing effect of GB on the fluorescence emission of mercaptopropionic acid (MPA) capped cadmium telluride quantum dots (CdTe QDs). QDs were synthesized in aqueous solution and were characterized by fluorescence spectroscopy, transmission electron microscopy (TEM), X‐ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT‐IR). Fluorescence intensity of QDs was enhanced by adding GB in a very low concentration. The effect of operative factors such as pH, buffer, contact time and concentration of CdTe QDs were investigated and in the optimized condition, a linear increase was achieved for the emission intensity of QDs by increasing GB concentration in the range 49–345 ng mL^?1, with a detection limit of 17.84 ng mL^?1. The offered method has an acceptable precision (relative standard deviations were < 2.8%) and was satisfactorily applied for the determination of GB in pharmaceutical products and human urine samples.     

Aqueous synthesis of highly luminescent surface Mn2+‐doped CdTe quantum dots as a potential multimodal agent

Mn²⁺‐doped CdTe quantum dots (QDs) were synthesized directly via a facile surface doping strategy in aqueous solution. The best optical property emerged when the added amount of Mn²⁺ was 5% compared to Cd²⁺ in the CdTe nanoparticles and the reaction temperature was 60 °C. The fluorescence and magnetic properties of the QDs were studied. The as‐prepared Mn²⁺‐doped CdTe QDs have high quantum yield (48.13%) and a narrow distribution with an average diameter of 3.7 nm. The utility of biological imaging was also studied. Depending on the high quantum yield, cells in culture were illuminated and made more distinct from each other compared to results obtained with normal QDs. They also have a prominent longitudinal relaxivity value (r₁ = 4.2 mM^?1s^?1), which could indicate that the Mn²⁺‐doped CdTe QDs can be used as a potential multimodal agent for fluorescence and magnetic resonance imaging. Copyright © 2014 John Wiley & Sons, Ltd.     

A simple and sensitive label‐free fluorescence sensing of heparin based on Cdte quantum dots

A rapid, simple and sensitive label‐free fluorescence method was developed for the determination of trace amounts of an important drug, heparin. This new method was based on water‐soluble glutathione‐capped CdTe quantum dots (CdTe QDs) as the luminescent probe. CdTe QDs were prepared according to the published protocol and the sizes of these nanoparticles were verified through transmission electron microscopy (TEM), X‐ray diffraction (XRD) and dynamic light scattering (DLS) with an average particle size of about 7 nm. The fluorescence intensity of glutathione‐capped CdTe QDs increased with increasing heparin concentration. These changes were followed as the analytical signal. Effective variables such as pH, QD concentration and incubation time were optimized. At the optimum conditions, with this optical method, heparin could be measured within the range 10.0–200.0 ng mL^?1 with a low limit of detection, 2.0 ng mL^?1. The constructed fluorescence sensor was also applied successfully for the determination of heparin in human serum. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and characterization of cadmium selenide quantum dots doped by europium and investigation of their chemiluminescence properties and antibacterial activities

Nanoparticles of cadmium selenide (CdSe) doped with europium, were synthesized as stabilizing agents using thioglycolic acid ligand. This method is based on the enhancing effect of CdSe quantum dots (QDs) doped with europium on chemiluminescence (CL) emission. This emission was generated by mixing CdSe QDs with manganese (II), iron (II) and chrome (II) sulfates as catalysts in the presence of hydrogen peroxide (H₂O₂). The structural characteristics and morphology of these nanoparticles were investigated by scanning electron microscopy, Fourier transform infrared spectroscopy, ultraviolet–visible absorption spectroscopy, X‐ray pattern and dynamic light scattering methods. The CdSe QDs doped with europium were used as the sensitizer in a luminol?hydrogen peroxide CL system. The sensitized CdSe QDs were analyzed for antibacterial activity against Gram‐positive or Gram‐negative bacteria. The results showed that the CdSe QDs are effective against all the studied bacteria, effectiveness was especially higher for Bacillus subtilis.     

Direct and indirect immunolabelling of HeLa cells with quantum dots

With excellent optical properties, quantum dots (QDs) have been made as attractive molecular probes for labelling cells in biological research. In this study high‐quality CdSe QDs prepared in a paraffin–oleic acid system were used as fluorescent labels in direct and indirect detection of carcinoembryonic antigen (CEA), a cancer marker expressed on the surface of HeLa cells. The primary antibody (Ab) (rabbit anti‐CEA8) and secondary Ab (goat anti‐rabbit IgG) were covalently linked to carboxyl‐functioned CdSe QDs, and both the QDs–antibody and QDs–IgG probes were successfully used to label HeLa cells. The present study demonstrates the practicability of CdSe QDs as an attractive type of fluorescent labels for biological applications such as protein probes and cell imaging. Copyright © 2008 John Wiley & Sons, Ltd.