A new silver nanochain SERS analytical platform to detect trace hexametaphosphate with a rhodamine S molecular probe

Using AgNO₃ as the precursor, stable silver nanochain (AgNC) sols, orange‐red in color, were prepared using hydrazine hydrate. A strong surface plasmon resonance Rayleigh scattering (RRS) peak occurred at 420 nm plus two surface plasmon resonance (SPR) absorption peaks at 410 nm and 510 nm. Rhodamine S (RhS) cationic dye was absorbed on the as‐prepared AgNC substrate to obtain a RhS–AgNC surface‐enhanced Raman scattering (SERS) nanoprobe that exhibited a strong SERS peak at 1506 cm^–1 and a strong RRS peak at 375 nm. Upon addition of the analyte sodium hexametaphosphate (HP), it reacted with RhS, which resulted in a decrease in the SERS and RRS peaks that was studied in detail. The decreased SERS and RRS intensities correlated linearly with HP concentration in the range of 0.0125–0.3 µmol/L and 0.05–1.0 µmol/L, with a detection limit of 6 nmol/L and 20 nmol/L HP respectively. Due to advantages of high sensitivity, good selectivity and simple operation, the RhS molecular probes were used to determine HP concentration in real samples. Copyright © 2015 John Wiley & Sons, Ltd.     

A nanogold resonance Rayleigh scattering method for determination of trace As based on the hydride nanoreaction

In H₂SO₄ solution, As(III) was reduced to arsine (AsH₃) by NaBH₄, and was absorbed in HAuCl₄ solution to form nanogold particles (NGs) that exhibited a resonance Rayleigh scattering (RRS) effect at 370 nm. Under the selected conditions, when the As(III) concentration increased the RRS peak also increased due to the formation of more NGs. There was a linear correlation between RRS intensity and As(III) concentration in the range 6–1000 ng/mL, with a detection limit of 3 ng/mL. This new hydride generation–nanogold reaction RRS (HG–NG RRS) method was applied to determine trace amounts of As in milk samples, with satisfactory results. Copyright © 2015 John Wiley & Sons, Ltd.     

A simple and sensitive resonance Rayleigh scattering method for determination of As(III) using aptamer‐modified nanogold as a probe

A simple and selective aptamer (ssDNA)‐modified nanogold probe (AussDNA) was prepared for the determination of trace As(III) in HEPES buffer solution (pH 8.2) containing 0.05 mol/L NaCl. The method coupled the aptamer reaction of AussDNA–As(III) and the resonance Rayleigh scattering (RRS) of nanogold aggregations at 278 nm. When the As(III) concentration increased, the RRS intensity at 278 nm increased to form more nanogold aggregation and a stable As(III)–ssDNA complex. Under selected conditions, the increased RRS intensity (ΔI) was linear to the concentration of As(III) in the range 3.8–230.4 ng/mL, with a detection limit of 1.9 ng/mL. This RRS method was applied to detect As(III) in water samples, with simplicity, sensitivity and selectivity. Copyright © 2013 John Wiley & Sons, Ltd.     

Interaction of proteins with aluminum(III)–chlorophosphonazo III by resonance Rayleigh scattering method

In weak acid medium, aluminum(III) can react with chlorophosphonazo III [CPA(III), H₈L] to form a 1:1 coordination anion [Al(OH)(H₄L)]^2‐. At the same time, proteins such as bovine serum albumin (BSA), lysozyme (Lyso) and human serum albumin (HSA) existed as large cations with positive charges, which further combined with [Al(OH)(H₄L)]^2‐ to form a 1:4 chelate. This resulted in significant enhancement of resonance Rayleigh scattering (RRS), second‐order scattering (SOS) and frequency doubling scattering (FDS). In this study, we investigated the interaction between [Al(OH)(H₄L)]^2‐ and proteins, optimization of the reaction conditions and the spectral characteristics of RRS, SOS and FDS. The maximum RRS wavelengths of different protein systems were located at 357–370 nm. The maximum SOS and FDS wavelengths were located at 546 and 389 nm, respectively. The scattering intensities (ΔI) of the three methods were proportional to the concentration of the proteins, within certain ranges, and the detection limits of the most sensitive RRS method were 2.6–9.3 ng/mL. Moreover, the chelate reaction mechanism or the reasons for the enhancement of RRS were discussed through absorption spectra, fluorescence spectra and circular dichroism (CD) spectra. Copyright © 2013 John Wiley & Sons, Ltd.     

A new and highly sensitive resonance Rayleigh scattering assay for lysozyme using aptamer–nanogold as a probe

Gold nanoparticles (GN), 10 nm in size, were modified by using lysozyme aptamer (Apt) to obtain a stable Apt–GN probe in pH 8.05 Tris/HCl buffer solutions containing 0.04 mol/L NaCl. Upon addition of lysozyme (LYS), it reacted with the Apt of the probe to form a very stable Apt–LYS complex and to release GNs, which aggregated to form large clusters with a resonance Rayleigh scattering (RRS) peak at 368 nm. The enhanced peak intensity, ΔI, was linear to the LYS concentration in the range 0.2–5.2 nmol/L, with a detection limit of 0.05 nmol/L. The influence of foreign substance was tested, and the results showed that this RRS method has high selectivity. This Apt–GN RRS method was applied to the analysis of LYS in a real sample, with satisfactory results. Copyright © 2014 John Wiley & Sons, Ltd.     

A simple and rapid resonance Rayleigh scattering method for detection of indigo carmine in soft drink

A novel method that uses acridine orange (AO) to detect indigo carmine (IC) in soft drinks was developed. The method is highly sensitive and is based on a resonance Rayleigh scattering (RRS) technique. In Britton–Robinson (BR) buffer solution, pH 4.3, the weak RRS intensity of AO was greatly enhanced by the addition of IC, with the maximum peak located at 332 nm. Under optimum conditions, it was found that the enhanced RRS intensity was proportional to the concentration of IC over a range of 2–32 × 10^?6 mol/L. A low detection limit of 2.4 × 10^?8 mol/L was achieved. The sensitivity and selectivity of the method are high enough to permit the determination of trace amounts of IC without any significant interference from high levels of other components such as common anions and other amino acids. Finally, the concentration of IC in three different soft drinks was determined with satisfactory results. Copyright © 2016 John Wiley & Sons, Ltd.     

Effects of the interaction between Na2Wo4‐6‐benzylaminopurine anionic chelate and rhodamine 6G on the resonance Rayleigh scattering and fluorescence spectra and their analytical applications

In pH 4.99‐6.06 Britton‐Robinson (BR) buffer medium, 6‐benzylaminopurine (6‐BA) reacted with Na₂WO₄ to form 1:1 anionic chelate (6‐BA·WO₄)^2‐, which further reacted with rhodamine 6G to form ternary ion complexes at room temperature. This resulted in a significant enhancement of resonance Rayleigh scattering (RRS) with a maximum RRS wavelength of 316 nm. Meanwhile, the fluorescence of the solution was quenched and excitation (λ_ex) and emission (λ_em) wavelengths of the fluorescence were 290 and 559 nm, respectively. Intensities of RRS enhancing (ΔI_RRS) and fluorescence quenching (ΔI_F) were directly proportional to concentrations of 6‐BA. As a result, RRS and fluorescence quenching for determination of trace amounts of 6‐BA were developed. Under optimal conditions, linear ranges and detection limits of the two methods were 0.05‐15.00 µg/mL and 8.2 ng/mL (RRS), 0.50‐15.00 µg/mL and 17.0 ng/mL, respectively. It was found that the RRS method was superior to fluorescence quenching. The influence of these methods were investigated and results showed that RRS had good selectivity. RRS was applied to determine 6‐BA in vegetable samples with satisfactory results. Furthermore, the reaction mechanisms of the ternary ion‐association system are discussed. In addition, the polarization experiment revealed that the resonance light scattering (RLS) peak of Na₂WO₄‐6‐BA‐R6G consisted mainly of depolarized resonance fluorescence and resonance scattering. It was speculated that light emission fluorescence energy (E_L) transformed into resonance light scattering energy (E_RLS), which was a key reason for enhancement of RRS. Copyright © 2012 John Wiley & Sons, Ltd.     

Comparison of interactions between human serum albumin and silver nanoparticles of different sizes using spectroscopic methods

Three different sizes (15.9 ± 2.1 nm, 26.4 ± 3.2 nm and 39.8 ± 4.0 nm, respectively) of citrate‐coated silver nanoparticles (SNPs) have been synthesized and characterized. The interactions of the synthesized SNPs with human serum albumin (HSA) at physiological pH have been systematically studied by UV‐vis absorption spectroscopy, fluorescence spectroscopy, synchronous fluorescence spectroscopy, three‐dimensional fluorescence spectroscopy and circular dichroism (CD) spectroscopy. The results indicate that the SNPs can bind to HSA with high affinity and quench the intrinsic fluorescence of HSA. The binding constants and quenching rate constants were calculated. The apparent association constants (K_app) values are 2.14 × 10⁴ M^–1 for 15.9 nm SNP, 1.65 × 10⁴ M^–1 for 26.4 nm SNP and 1.37 × 10⁴ M^–1 for 39.8 nm SNP, respectively. The values of binding constant obtained from the fluorescence quenching data match well with that determined from the absorption spectral changes. These results suggest that the smaller SNPs have stronger interactions to HSA than the larger ones at the same concentrations. Synchronous fluorescence, three‐dimensional fluorescence and CD spectroscopy studies show that the synthesized SNPs can induce slight conformational changes in HSA. Copyright © 2014 John Wiley & Sons, Ltd.     

Graphite oxide‐dispersed CdTe quantum dots nanocomposite for flexible display luminescent membranes

A quantum dot (QD) dispersant material was prepared using graphite oxide (GO). Luminescent films were prepared using polyvinyl alcohol as the polymer matrix. First, water‐soluble CdTe QDs were prepared by wet chemistry and GO was synthesized using a modified Hummers method. X‐Ray diffraction tests showed that the GO reflection peak [001] was 11.9°, which indicates that the d‐spacing is 0.7431 nm; atomic force microscopy showed a GO thickness of 200 nm. Fourier transform infrared spectra showed vibrations at 1624 cm^?1 for the carbonyl groups, and 3260 cm^?1 for the GO samples; the ‐C–O vibration was at 1320 cm^?1 and ‐COOH, ?OH vibrations were at 950 cm^?1. Fluorescent tests showed that pH had an impact on the QD colloidal stability. GO was neutralized before use as the host media for the GO/QDs nanocomposite. The results proved that the resultant nanocomposite is promising for use in brightness enhancement films in flexible displays.     

Study on the interaction between erythrosine B and the cardiac drug amiodarone using fluorescence,scattering, and absorbance spectra and their analytical application

In an acidic buffered solution, erythrosine B can react with amiodarone to form an association complex, which not only generates great enhancement in resonance Rayleigh scattering (RRS) spectrum of erythrosine B at 346.5 nm but also results in quenching of fluorescence spectra of erythrosine B at λ_emission = 550.4 nm/λ_excitation = 528.5 nm. In addition, the formed erythrosine B–amiodarone complex produces a new absorbance peak at 555 nm. The spectral characteristics of the RRS, absorbance, and fluorescence spectra, as well as the optimum analytical conditions, were studied and investigated. As a result, new spectroscopic methods were developed to determine amiodarone by utilizing erythrosine B as a probe. Moreover, the ICH guidelines were used to validate the developed RRS, photometric, and fluorimetric methods. The enhancements in the absorbance and the RRS intensity and the decrease in the fluorescence intensity of the used probe were proportional to the concentration of amiodarone in ranges of 2.5–20.0, 0.2–2.5, and 0.25–1.75 μg/mL, respectively. Furthermore, limit of detection values were 0.52 ng/mL for the spectrophotometric method, 0.051 μg/mL for the RRS method, and 0.075 μg/mL for the fluorimetric method. Moreover, with good recoveries, the developed spectroscopic procedures were applied to analyze amiodarone in its commercial tablets.     

Resonance Rayleigh-scattering method for the determination of proteins with gold nanoparticle probe

Gold nanoparticles with a 12-nm diameter were used as probes for the determination of proteins by resonance Rayleigh-scattering techniques. In weak acidic solution, large amounts of citrate anions will self-assemble on the surface of positively charged gold nanoparticles to form supermolecular compounds with negative charges. Below the isoelectric point, proteins with positive charges such as human serum albumin (HSA), bovine serum albumin (BSA), and ovalbumin (Ova) can bind gold nanoparticles to form larger volume products (the diameter of the binding product of gold nanoparticles with HSA is 23 nm.) through electrostatic force, hydrogen bonds, and hydrophobic effects, which can result in a red shift of the maximum absorption wavelength, the remarkable enhancement of the resonance Rayleigh-scattering intensity (RRS), and the appearance of the RRS spectra. At the same time, the second-order-scattering (SOS) and frequency-doubling-scattering (FDS) intensities are also enhanced. The binding products of gold nanoparticles with different proteins have similar spectral characteristics and the maximum wavelengths are located near 303 nm for RRS, 540 nm for SOS, and 390 for FDS, respectively. The scattering enhancement (DeltaI) is directly proportional to the concentration of proteins. Among them, the RRS method has the highest sensitivity and the detection limits are 0.38 ng/ml for HSA, 0.45 ng/ml for BSA, and 0.56 ng/ml for Ova, separately. The methods have good selectivity. A new RRS method for the determination of trace proteins using a gold nanoparticle probe has been developed. Because gold nanoparticle probes do not need to be modified chemically in advance, the method is very simple and fast.     

SERS quantitative detection of trace human chorionic gonadotropin using a label‐free Victoria blue B as probe in the aggregated immunonanogold sol substrate

Nanogold particles (NG) were modified by anti‐rabbit antibody (RAb) against human chorionic gonadotropin to obtain an immunonanogold probe (ING). In pH 7.0 Na₂HPO₄‐citrate buffer solution containing KCl, ING probes formed large aggregates in which Victoria blue B (VBB) molecules were adsorbed on the surface and which exhibited strong surface‐enhanced Raman scattering (SERS) at a peak of 1612 cm^–1. After addition of human chorionic gonadotropin (hCG) an immune reaction with the ING probe occurred to form dispersive ING–hCG complexes with non‐SERS activity that led to a decreased SERS peak at 1612 cm^–1. The decreased SERS intensity was linear to the concentration of hCG over 2.4–73.2 ng/mL. The ING reaction was studied in detail by SERS, scanning electron microscope (SEM), resonance Rayleigh scattering (RRS), surface plasmon resonance (SPR) absorption and laser scattering techniques. SERS quenching was observed and discussed. Copyright © 2014 John Wiley & Sons, Ltd.     

Study on the resonance Rayleigh scattering and resonance non‐linear scattering spectra of ion‐association complexes of [PdI4]2−‐protein systems and their analytical applications

In an acid medium solution, proteins such as bovine serum albumin, human serum albumin, ovalbumin, hemoglobin, lysozyme, γ‐globulin, α‐chymotrypsin and papain could react with [PdI₄]^2? by virtue of electrostatic attraction and hydrophobic force to form ion‐association complexes. As a result, the resonance Rayleigh scattering (RRS) and resonance nonlinear scattering such as second‐order scattering (SOS) and frequency doubling scattering (FDS) intensities were enhanced greatly and new scattering spectra appeared. The maximum scattering peaks of RRS, SOS and FDS were at 367, 720 and 370 nm, respectively. The enhanced RRS, SOS and FDS intensities were directly proportional to the concentrations of proteins. The detection limits for the different proteins were 2.4–11.8 ng/mL for RRS method, 9.5–47.9 ng/mL for SOS method and 4.6–18.5 ng/mL for FDS method. In this work, the influences of the interaction of [PdI₄]^2? with proteins on spectral characteristics of RRS, SOS and FDS were investigated and the optimum conditions were tested. Meanwhile, the effects of coexisting substances were tested and the results showed that the method exhibited a good selectivity. Based on the above research, a highly sensitive, simple and rapid method for the determination of trace amounts of proteins by resonance light scattering technique has been developed. It can be applied to the determination of proteins in tablet, human serum and urine samples. Copyright © 2009 John Wiley & Sons, Ltd.     

Study on the interaction between palladium(II)–lincomycin chelate and erythosine by absorption,fluorescence and resonance Rayleigh scattering spectra and its analytical applications

In pH 5.0–5.4 HAc–NaAc buffer solution, lincomycin (Linco) reacted with Pd(II) to form 1:1 cationic chelate, which could further react with erythrosine (Ery) to form 1:1 ion‐association complexes (Pd–Linco)Ery. As a result, not only were the absorption and fluorescence spectra changed, but also the resonance Rayleigh scattering (RRS) intensity was greatly enhanced. These phenomena offered useful means for the determination of Linco by spectrophotometry, fluorescence and RRS methods. The linear range and detection limit of Linco were 0.20–3.00 µg/mL and 0.057 µg/mL, 0.20–4.80 µg/mL and 0.061 µg/mL, 0.05–2.70 µg/mL and 0.015 µg/mL for the spectrophotometric, fluorescence quenching and RRS methods, respectively. Among these, the RRS method obtained the highest sensitivity. Therefore, the optimum reaction conditions and the influences of coexisting substances were investigated using the RRS method. A simple, sensitive and rapid method has been developed for the determination of Linco in either the pharmaceutical form or human body fluids, and the reasons for RRS enhancement are discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

Aptasensor for amplified IgE sensing based on fluorescence quenching by graphene oxide

Water‐soluble graphene oxide (GO) with a two‐dimensional layered nanostructure was synthesized and used as a quencher to construct a highly sensitive and selective fluorescence resonance energy transfer (FRET) aptasensor for sensing Immunoglobulin E (IgE). The fluorescein isothiocyanate (FITC)‐labeled aptamer could be adsorbed stably onto the surface of GO via π → π stacking interaction, which led to the occurrence of FRET from FITC to GO, and the fluorescence of FITC‐labeled aptamer was quenched by GO via energy transfer. In the presence of IgE, the fluorescence was recovered due to a higher affinity between the aptamer and IgE compared with interactions between GO and the aptamer, leading to a high signal‐to‐background ratio. The fluorescence intensity of the aptamer increased in proportion to the amount of IgE in the sample,so that IgE could be detected with a linear range of 60–225 pM and a detection limit of 22 pM. The assay was highly selective because the aptamer was unaffected by the presence of immunoglobulin G (IgG), human serum albumin (HSA) and bovine serum albumin (BSA). The practical application of the proposed aptasensor was successfully carried out for the determination of IgE in human serum samples. Copyright © 2012 John Wiley & Sons, Ltd.     

Resonance Rayleigh scattering methods for the determination of chitosan with Congo red as probe

Two methods were presented for the sensitive and selective determination of chitosan (CTS) with Congo red (CR) as probe based on resonance Rayleigh scattering (RRS) intensities in health products. In weakly acidic buffer solution, the binding of CTS to CR, could result in the enhancement of the RRS intensities. Moreover, after adding OP emulsifier (octyl‐phenyl polyoxyethylene ether) to the system, the RRS intensities showed more significantly enhancement. The maximum RRS signals for the CTS–CR system and the CTS–CR–OP system were located at 380 nm and 376 nm, respectively. Under optimum experimental conditions, the increased RRS intensities (ΔI) of these two systems were linear to CTS concentration in the range of 0.40–8.00 μg/ml and 0.05–1.00 μg/ml. Their limits of detection (LOD) were 44.81 ng/ml and 6.99 ng/ml, which indicated that the latter system was more sensitive than the former. In this work, the optimum conditions and the effects of some foreign substances on the determination were studied. In addition, the effect of the molecular weight of CTS and the reasons for the enhancement of resonance light scattering were discussed. Finally, these two methods were applied to the determination of chitosan in health products with satisfactory results.     

Blue excitable green emitting Ce3+ doped CaS phosphor for w‐LEDs

CaS:Ce³⁺ is an efficient green‐emitting (535 nm) phosphor, excitable with blue light (450–470 nm) and was synthesized via a solid‐state reaction method by heating under a reducing atmosphere. The luminescent properties, photoluminescent (PL) excitation and emission of the phosphor were analyzed by spectrofluorophotometry. The excitation and emission peaks of the CaS:Ce³⁺ phosphor lay in the visible region, which made them relevant for light‐emitting diode (LED) application for the generation of white light. Judd‐Oflet parameters were calculated and revealed that green light emitted upon blue illumination. The prepared phosphor had strong blue absorption at 470 nm and a broad green emission band range from 490–590 nm with the peak at 537 nm. The characteristics of the CaS:Ce³⁺ phosphor make it suitable for use as a wavelength tunable green emitting phosphor for three band white LEDs pumped by a blue LED (470 nm). The Commission International de l'Eclairage co‐ordinates were calculated by a spectrophotometric method using the spectral energy distribution (0.304, 0.526) and confirm the green emission. The potential application of this phosphor is as a phosphor‐converted white light‐emitting diode. Copyright © 2015 John Wiley & Sons, Ltd.     

High‐performance liquid chromatography study of gatifloxacin and sparfloxacin using erythrosine as post‐column resonance Rayleigh scattering reagent and mechanism study

Herein, a highly selective high‐performance liquid chromatography (HPLC) coupled with resonance Rayleigh scattering (RRS) method was developed to detect gatifloxacin (GFLX) and sparfloxacin (SPLX). GFLX and SPLX were first separated by HPLC, then, in pH 4.4 Britton–Robinson (BR) buffer medium, protonic quaternary ammonia cation of GFLX and SPLX reacted with erythrosine (ERY) to form 1:1 ion‐association complexes, which resulted in a significant enhancement of RRS signal. The experimental conditions of HPLC and post‐column RRS have been investigated, including detection wavelength, flow rate, pH, reacting tube length and reaction temperature. Reaction mechanism were studied in detail by calculating the distribution fraction. The maximum RRS signals for GFLX and SPLX were recorded at λ_ex = λ_em = 330 nm. The detection limits were 3.8 ng ml^?1 for GFLX and 17.5 ng ml^?1 for SPLX at a signal‐to‐noise ratio of 3. The developed method was successfully applied to the determination of GFLX and SPLX in water samples. Recoveries from spiked water samples were 97.56–98.85%.     

Resonance Rayleigh scattering technique as a detection method for the RP‐HPLC determination of local anaesthetics in human urine

A highly selective and sensitive method of reversed phase high‐performance liquid chromatography (RP‐HPLC) coupled with resonance Rayleigh scattering (RRS) was developed for the determination of procaine, bupivacaine and tetracaine. Separation of three local anaesthetics was achieved at 35 °C on a C₁₈ column. The mobile phase was 30: 70 (v/v) acetonitrile/triethylamine–phosphoric acid buffer (pH 2.9) at flow rate of 0.3 mL/min. The RRS detection was conducted by taking advantage of the strong RRS enhancement of the local anaesthetics with erythrosine reaction in an acidic medium. Under optimum conditions, the limit of detection (S/N = 3) values were in the range of 2.4–11.2 ng/mL. Recoveries from spiked human urine samples were 95.8%–104.5%. The proposed method applied to the determination of local anaesthetics in human urine achieved satisfactory results. In addition, the mechanism of the reaction is fully discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

Fluorimetric determination of proteins using 4‐chloro‐(2′‐hydroxylophenylazo)rhodanine–Ti(IV) complex as a spectral probe

A novel method for the determination of proteins was developed, based on the enhancement of fluorescence with 4‐chloro‐(2′‐hydroxylophenylazo)rhodanine–Ti(IV) [ClHARP–Ti(IV)] complex as a fluorescence probe. The excitation and emission wavelengths of the system were 335 nm and 376 nm, respectively. The presence of bis(2‐ethylhexyl)sulphosuccinate sodium salt (AOT) microemulsion greatly increased the sensitivity of the system. Under optimal conditions, four kinds of proteins, including bovine serum albumin (BSA), human serum albumin (HSA), egg albumin (Ova), and γ‐globin (γ‐G) were studied. The detection limits were 0.182 µg/mL for BSA, 0.0788 µg/mL for HSA, 0.216 µg/mL for Ova and 0.484 µg/mL for γ‐G. The linear ranges of the calibration were 0–12.0, 0–10.0, 0–18.0 and 0–18.0 µg/mL, respectively. The method possessed high sensitivity, good selectivity and was applied to the analysis of protein in milk powder and cornmeal with satisfactory results. Copyright © 2008 John Wiley & Sons, Ltd.