Placental Transfer of a Fully Human IgG2 Monoclonal Antibody in the Cynomolgus Monkey,Rat, and Rabbit: A Comparative Assessment from during Organogenesis to Late Gestation

Understanding species differences in the placental transfer of monoclonal antibodies is important to inform species selection for nonclinical safety assessment, interpret embryo‐fetal changes observed in these studies, and extrapolate their human relevance. Data presented here for a fully human immunoglobulin G2 monoclonal antibody (IgG2X) revealed that, during organogenesis, in both the cynomolgus monkey (gestation day 35 [gd35]) and the rat (gd10) the extent of IgG2X placental transfer (approximately 0.5% maternal plasma concentration, MPC) was similar to the limited published human data for endogenous IgG. At this early gestational stage, IgG2X placental transfer was approximately 6‐fold higher in the rabbit (gd10). By the end of organogenesis, rat embryonic plasma concentrations (gd16) exceeded those in the cynomolgus monkey (gd50) by approximately 3‐fold. These data suggest that relative to the cynomolgus monkey, the rabbit (and to a lesser extent the rat) may overestimate potential harmful effects to the human embryo during this critical period of development. Beyond organogenesis, fetal IgG2X plasma concentrations increased approximately 10‐fold early in the second trimester (gd50–70) in the cynomolgus monkey and remained relatively unchanged thereafter (at approximately 5% MPC). Late gestational assessment was precluded in rabbits due to immunogenicity, but in rats, fetal IgG2X plasma concentrations increased more than 6‐fold from gd16 to gd21 (reaching approximately 15% MPC). In rats, maternal exposure consistent with that achieved by ICH S6(R1) high‐dose selection criteria resulted in embryonic plasma concentrations, reaching pharmacologically relevant levels during organogenesis. Furthermore, dose proportional exposure in both mothers and embryos indicated that this was unlikely to occur at the lower therapeutic dose levels used in humans     

Species‐specificity of ethylene glycol‐induced developmental toxicity: toxicokinetic and whole embryo culture studies in the rabbit

High‐dose gavage exposure to ethylene glycol (EG) is teratogenic in rats, but not rabbits. To investigate the reason for this species difference, toxicokinetic and whole embryo culture (WEC) studies were conducted in gestation day 9 New Zealand White rabbits, and the data compared to very similar data previously generated in pregnant rats. In the toxicokinetic study, maximal levels of unchanged EG in rabbits were comparable to those reported for rats. However, maximal levels of EG's teratogenic metabolite, glycolic acid (GA), in rabbit maternal blood and embryo were only 46% and 10% of the respective levels in rats. The toxicokinetic profile suggested that the lower GA levels in rabbits were due to a slower rate of maternal metabolism of EG to GA, slow uptake of GA into the yolk sac cavity fluid which surrounds the embryo, and negligible transfer via the visceral yolk sac (VYS) placenta. In the WEC study, exposure of rabbit conceptuses to high concentrations (≤12.5 mM) of GA was without effect, which contrasts with reported effects in rat WEC at ≥3 mM. Overall, these data implicate toxicokinetics as an important factor underlying the species difference, although intrinsic insensitivity of the rabbit embryo might also be involved. Integration of these findings with published human data suggest that the rabbit is the more relevant model for human EG exposure, based on the negligible role of the rabbit VYS in placental transfer (humans lack a VYS) and similar rates of EG metabolism and extraembryonic fluid turnover. Birth Defects Res (Part B) 2008. © 2008 Wiley‐Liss, Inc.     

Linear pharmacokinetic parameters for monoclonal antibodies are similar within a species and across different pharmacological targets: A comparison between human,cynomolgus monkey and hFcRn Tg32 transgenic mouse using a population-modeling approach

The linear pharmacokinetics (PK) of therapeutic monoclonal antibodies (mAbs) can be considered a class property with values that are similar to endogenous IgG. Knowledge of these parameters across species could be used to avoid unnecessary in vivo PK studies and to enable early PK predictions and pharmacokinetic/pharmacodynamic (PK/PD) simulations. In this work, population-pharmacokinetic (popPK) modeling was used to determine a single set of ‘typical’ popPK parameters describing the linear PK of mAbs in human, cynomolgus monkey and transgenic mice expressing the human neonatal Fc receptor (hFcRn Tg32), using a rich dataset of 27 mAbs. Non-linear PK was excluded from the datasets and a 2-compartment model was applied to describe mAb disposition. Typical human popPK estimates compared well with data from comparator mAbs with linear PK in the clinic. Outliers with higher than typical clearance were found to have non-specific interactions in an affinity-capture self-interaction nanoparticle spectroscopy assay, offering a potential tool to screen out these mAbs at an early stage. Translational strategies were investigated for prediction of human linear PK of mAbs, including use of typical human popPK parameters and allometric exponents from cynomolgus monkey and Tg32 mouse. Each method gave good prediction of human PK with parameters predicted within 2-fold. These strategies offer alternative options to the use of cynomolgus monkeys for human PK predictions of linear mAbs, based on in silico methods (typical human popPK parameters) or using a rodent species (Tg32 mouse), and call into question the value of completing extensive in vivo preclinical PK to inform linear mAb PK.     

Impact of IgG Fc‐Oligosaccharides on Recombinant Monoclonal Antibody Structure,Stability, Safety,and Efficacy

Glycosylation of the conserved asparagine residue in the CH2 domain is the most common posttranslational modification of recombinant monoclonal antibodies. Ideally, a consistent oligosaccharide profile should be maintained from early clinical material to commercial material for the development of recombinant monoclonal therapeutics, though variation in the profile is a typical result of process changes. The risk of oligosaccharide variation posed to further development is required to be thoroughly evaluated based on its impact on antibody structure, stability, efficacy and safety. The variation should be controlled within a range so that there is no detrimental impact on safety and efficacy and thus allowing the use of early phase safety and efficacy data to support project advancement to later phase. This review article focuses on the current scientific understanding of the commonly observed oligosaccharides found in recombinant monoclonal antibodies and their impact on structure, stability and biological functions, which are the basis to evaluate safety and efficacy. It also provides a brief discussion on critical quality attribute (CQA) assessment with regard to oligosaccharides based on the mechanism of action (MOA). © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1173–1181, 2017     

Inhibition of bovine sperm‐oocyte fusion by a monoclonal antibody recognising the TEC‐2 epitope on bovine oocytes

The TEC‐2 antigenic determinant is a carbohydrate epitope located on a glycoprotein carrier molecule. In the mouse, this epitope is expressed on the zona pellucida and plasma membrane of the oocyte and is associated with the ZP2 glycoprotein and involved in the secondary sperm receptor mechanism. On the bovine oocyte expression is confined to the plasma membrane. The aim of this study was to determine the role the TEC‐2 epitope plays during fertilization in the bovine species using the monoclonal antibody TEC‐02. Incubating oocytes with the TEC‐02 antibody prior to fertilization inhibited cleavage in a dose‐dependent manner—the cleavage rate decreased as the concentration of the antibody increased. Significantly more sperm were bound to oocytes exposed to TEC‐02 (12 sperm/oocyte) compared to oocytes that were not incubated with the antibody (4 sperm/oocyte). Oocytes treated with the TEC‐02 antibody had a 7.5 ± 3.2% fusion rate and no cortical granule exocytosis compared with oocytes not exposed to the antibody, with 86.5 ± 5.8% of sperm‐oocyte fusions and release of cortical granules. The block to sperm‐oocyte fertilization observed in the pretreated group was overcome using intracytoplasmic sperm injection as the method of fertilization that bypassed the fusion process. Although sperm were binding to the oolemma these results suggest that fusion was not occurring and this may be due to the antibody occupying TEC‐2 epitope sites involved in the fusion process. In conclusion, the TEC‐2 epitope seems to be involved in sperm‐oocyte interaction in the bovine species and appears to be involved specifically during the fusion events of fertilization. Mol. Reprod. Dev. 54:173–178, 1999. © 1999 Wiley‐Liss, Inc.     

A Predictive Mathematical Model of Cell Cycle,Metabolism, and Apoptosis of Monoclonal Antibody‐Producing GS–NS0 Cells

The monoclonal antibody (mAb) industry is witnessing unprecedented growth, with an increasing range of new molecules and biosimilars as well as disease targets approved than ever before. Competition necessitates pharmaceutical companies to reduce development/production costs and time‐to‐market. To this aim, mathematical modeling can aid traditional experiment‐only‐based process development by reducing the design space, integrating scales, and assisting in identifying optimal operating conditions in less time and with lower expense. Mathematical models have been employed by other industries for control and optimization purposes and are important decisional tools for testing scenarios, process configurations, operating conditions, etc. Herein, a predictive, experimentally validated mathematical model that captures cellular metabolism and growth with cell cycle, cell death (apoptosis), and mAb production in GS–NS0 cells is presented. The model utilizes cellular, metabolic, and gene expression data, highlighting how multiple data sources can be integrated in one tool with the aim of optimizing mammalian cell bioprocessing.     

Model‐based investigation of intracellular processes determining antibody Fc‐glycosylation under mild hypothermia

Despite the positive effects of mild hypothermic conditions on monoclonal antibody (mAb) productivity (q_mAb) during mammalian cell culture, the impact of reduced culture temperature on mAb Fc‐glycosylation and the mechanism behind changes in the glycan composition are not fully established. The lack of knowledge about the regulation of dynamic intracellular processes under mild hypothermia restricts bioprocess optimization. To address this issue, a mathematical model that quantitatively describes Chinese hamster ovary (CHO) cell behavior and metabolism, mAb synthesis and mAb N‐linked glycosylation profile before and after the induction of mild hypothermia is constructed. Results from this study show that the model is capable of representing experimental results well in all of the aspects mentioned above, including the N‐linked glycosylation profile of mAb produced under mild hypothermia. Most importantly, comparison between model simulation results for different culture temperatures suggests the reduced rates of nucleotide sugar donor production and galactosyltransferase (GalT) expression to be critical contributing factors that determine the variation in Fc‐glycan profiles between physiological and mild hypothermic conditions in stable CHO transfectants. This is then confirmed using experimental measurements of GalT expression levels, thereby closing the loop between the experimental and the computational system. The identification of bottlenecks within CHO cell metabolism under mild hypothermic conditions will aid bioprocess optimization, for example, by tailoring feeding strategies to improve NSD production, or manipulating the expression of specific glycosyltransferases through cell line engineering. Biotechnol. Bioeng. 2017;114: 1570–1582. © 2016 The Authors. Biotechnology and Bioengineering Published by Wiley Periodicals Inc.     

High‐efficiency affinity precipitation of multiple industrial mAbs and Fc‐fusion proteins from cell culture harvests using Z‐ELP‐E2 nanocages

Affinity precipitation using Z‐elastin‐like polypeptide‐functionalized E2 protein nanocages has been shown to be a promising alternative to Protein A chromatography for monoclonal antibody (mAb) purification. We have previously described a high‐yielding, affinity precipitation process capable of rapidly capturing mAbs from cell culture through spontaneous, multivalent crosslinking into large aggregates. To challenge the capabilities of this technology, nanocage affinity precipitation was investigated using four industrial mAbs (mAbs A–D) and one Fc fusion protein (Fc A) with diverse molecular properties. A molar binding ratio of 3:1 Z:mAb was sufficient to precipitate >95% mAb in solution for all molecules evaluated at ambient temperature without added salt. The effect of solution pH on aggregation kinetics was studied using a simplified two‐step model to investigate the protein interactions that occur during mAb–nanocage crosslinking and to determine the optimal solution pH for precipitation. After centrifugation, the pelleted mAb–nanocage complex remained insoluble and was capable of being washed at pH ≥ 5 and eluted with at pH < 4 with >90% mAb recovery for all molecules. The four mAbs and one Fc fusion were purified from cell culture using optimal process conditions, and >94% yield and >97% monomer content were obtained. mAb A–D purification resulted in a 99.9% reduction in host cell protein and >99.99% reduction in DNA from the cell culture fluids. Nanocage affinity precipitation was equivalent to or exceeded expected Protein A chromatography performance. This study highlights the benefits of nanoparticle crosslinking for enhanced affinity capture and presents a robust platform that can be applied to any target mAb or Fc‐containing proteins with minimal optimization of process parameters.     

Synthetic sRNA‐Based Engineering of Escherichia coli for Enhanced Production of Full‐Length Immunoglobulin G

Production of monoclonal antibodies (mAbs) receives considerable attention in the pharmaceutical industry. There has been an increasing interest in the expression of mAbs in Escherichia coli for analytical and therapeutic applications in recent years. Here, a modular synthetic biology approach is developed to rationally engineer E. coli by designing three functional modules to facilitate high‐titer production of immunoglobulin G (IgG). First, a bicistronic expression system is constructed and the expression of the key genes in the pyruvate metabolism is tuned by the technologies of synthetic sRNA translational repression and gene overexpression, thus enhancing the cellular material and energy metabolism of E. coli for IgG biosynthesis (module 1). Second, to prevent the IgG biodegradation by proteases, the expression of a number of key proteases is identified and inhibited via synthetic sRNAs (module 2). Third, molecular chaperones are co‐expressed to promote the secretion and folding of IgG (module 3). Synergistic integration of the three modules into the resulting recombinant E. coli results in a yield of the full‐length IgG ≈150 mg L^?1 in a 5L fed‐batch bioreactor. The modular synthetic biology approach could be of general use in the production of recombinant mAbs.     

Isolation of B subunit‐specific monoclonal antibody clones that strongly neutralize the toxicity of Shiga toxin 2

Shiga toxin 2 (Stx2)‐specific mAb‐producing hybridoma clones were generated from mice. Because mice tend to produce small amounts of B subunit (Stx2B)‐specific antibodies at the polyclonal antibody level after immunization via the parenteral route, mice were immunized intranasally with Stx2 toxoids with a mutant heat‐labile enterotoxin as a mucosal adjuvant; 11 different hybridoma clones were obtained in two trials. Six of them were A subunit (Stx2A)‐specific whereas five were Stx2B‐specific antibody‐producing clones. The in vitro neutralization activity of Stx2B‐specific mAbs against Stx2 was greater than that of Stx2A‐specific mAbs on HeLa229 cells. Furthermore, even at low concentrations two of the Stx2B‐specific mAbs (45 and 75D9) completely inhibited receptor binding and showed in vivo neutralization activity against a fivefold median lethal dose of Stx2 in mice. In western blot analysis, these Stx2B‐specific neutralization antibodies did not react to three different mutant forms of Stx2, each amino acid residue of which was associated with receptor binding. Additionally, the nucleotide sequences of the V_H and V_L regions of clones 45 and 75D9 were determined. Our Stx2B‐specific mAbs may be new candidates for the development of mouse‐human chimeric Stx2‐neutralizing antibodies which have fewer adverse effects than animal antibodies for enterohemorrhagic Escherichia coli infection.     

The effect of low intensity ultraviolet‐C light on monoclonal antibodies

As part of an investigation to identify potential new viral reduction strategies, ultraviolet‐C (UV‐C) light was examined. Although this technology has been known for decades to possess excellent virus inactivation capabilities, UV‐C light can also introduce significant unwanted damage to proteins. To study the effect on monoclonal antibodies, three different antibodies were subjected to varying levels of UV‐C light using a novel dosing device from Bayer Technology Services GmbH. The range of fluencies (or doses) covered was between 0 and 300 J/m² at a wavelength of 254 nm. Product quality data generated from the processed pools showed only minimal damage done to the antibodies. Aggregate formation was low for two of the three antibodies tested. Acidic and basic variants increased for all three antibodies, with the basic species increasing more than the acidic species. Peptide maps made for the three sets of pools showed no damage to two of the three antibody backbones, whereas the third antibody had very low levels of methionine oxidation evident. Samples held at 2–8°C for 33 days showed no increase in aggregates or charge variants, indicating that the proteins did not degrade and were not damaged further by reactive or catalytic species that may have been created on exposure to UV‐C light. Overall, UV‐C light was shown to induce very little damage to monoclonal antibodies at lower fluencies and appears to be a viable option for viral inactivation in biotechnology applications. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Development of downstream processing to minimize beta‐glucan impurities in GMP‐manufactured therapeutic antibodies

The presence of impurities or contaminants in biological products such as monoclonal antibodies (mAb) could affect efficacy or cause adverse reactions in patients. ICH guidelines (Q6A and Q6B) are in place to regulate the level of impurities within clinical drug products. An impurity less often reported and, therefore, lacking regulatory guideline is beta‐glucan. Beta‐glucans are polysaccharides of d ‐glucose monomers linked by (1‐3) beta‐glycosidic bonds, and are produced by prokaryotic and eukaryotic organisms, including plants. They may enter manufacturing processes via raw materials such as cellulose‐based membrane filters or sucrose. Here we report the detection of beta‐glucan contamination of a monoclonal IgE antibody (MOv18), manufactured in our facility for a first‐in‐human, first‐in‐class clinical trial in patients with cancer. Since beta‐glucans have potential immunostimulatory properties and can cause symptomatic infusion reactions, it was of paramount importance to identify the source of beta‐glucans in our product and to reduce the levels to clinically insignificant concentrations. We identified beta‐glucans in sucrose within the formulation buffer and within the housing storage buffer of the virus removal filter. We also detected low level beta‐glucan contamination in two of four commercially available antibodies used in oncology. Both formulation buffers contained sucrose. We managed to reduce levels of beta‐glucan in our product 10‐fold, by screening all sucrose raw material, filtering the sucrose by Posidyne® membrane filtration, and by incorporating extra wash steps when preparing the virus removal filter. The beta‐glucan levels now lie within a range that is unlikely to cause clinically significant immunological effects. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:1494–1502, 2016     

Development of Immunoreagents for Diagnostics of CagA‐Positive Helicobacter pylori Infections

Background: Helicobacter pylori strains expressing cytotoxic CagA protein are more likely to provoke severe gastric mucosal pathology and cause adenocarcinoma development than that lacking CagA. Determination of the CagA‐status of a pathogen, therefore, is regarded as informative approach in H. pylori infection diagnostics and disease risk prediction. Materials and Methods: Molecular cloning, recombinant protein expression in Escherichia coli, affinity chromatography, electrophoresis and commonly used techniques of hybridoma production and screening were used as well as different immunosorbent assays and Western blot procedures. Results: Four overlapping N‐terminally His₆‐tagged recombinant fragments of CagA that covered the entire CagA sequence were produced and purified. An ELISA for specific anti‐CagA serum antibodies detection was developed and evaluated. Utilizing recombinant fragments, the first set of monoclonal antibodies against CagA‐antigen was produced and characterized. Three antibodies recognized distinct linear epitopes inside conserved regions of the cytotoxin whereas the epitope of the forth antibody was mapped in the variable area of CagA. The monoclonal antibodies allowed discriminating CagA‐positive and CagA‐negative H. pylori strains by means of Western blot and immunosorbent assays. Conclusions: The use of recombinant protein technology allowed obtaining pure CagA antigen, thus providing new perspectives for development of immunodiagnostic reagents. The set of monoclonal antibodies is a valuable tool for determination of CagA‐status of H. pylori infection and for the investigation of cytotoxin molecule as well.     

Site‐specific proteolytic degradation of IgG monoclonal antibodies expressed in tobacco plants

Plants are promising hosts for the production of monoclonal antibodies (mAbs). However, proteolytic degradation of antibodies produced both in stable transgenic plants and using transient expression systems is still a major issue for efficient high‐yield recombinant protein accumulation. In this work, we have performed a detailed study of the degradation profiles of two human IgG1 mAbs produced in plants: an anti‐HIV mAb 2G12 and a tumour‐targeting mAb H10. Even though they use different light chains (κ and λ, respectively), the fragmentation pattern of both antibodies was similar. The majority of Ig fragments result from proteolytic degradation, but there are only a limited number of plant proteolytic cleavage events in the immunoglobulin light and heavy chains. All of the cleavage sites identified were in the proximity of interdomain regions and occurred at each interdomain site, with the exception of the V_L/C_L interface in mAb H10 λ light chain. Cleavage site sequences were analysed, and residue patterns characteristic of proteolytic enzymes substrates were identified. The results of this work help to define common degradation events in plant‐produced mAbs and raise the possibility of predicting antibody degradation patterns ‘a priori’ and designing novel stabilization strategies by site‐specific mutagenesis.     

An Immunocytochemical Technique for Analysis of Regulation of Genes Encoding Early Differentiation Marker Antigens in an Oocyte Translation System

Monoclonal antibodies are useful probes for analyzing cells at the molecular level at various developmental stages. Although identification of the genes encoding tissue- and stage-specific antigens could be informative for further molecular analysis, gene cloning is usually a time-consuming step, particularly when a monoclonal antibody is the only probe available. We describe here an immunocytochemical method for preliminary and immediate analysis of the regulation of antigen-coding genes. mRNAs purified from stage 27 and 38 Xenopus tadpoles were fractionated by size and injected into newt oocytes, from which frozen sections were prepared for immunostaining with tissue-specific monoclonal antibodies. Both of the antigens we tested, which are early markers for differentiating epidermal cells of Xenopus tadpoles, were detected in mRNA injected oocytes, but not in control oocytes. Immunostaining for each of the antigens showed that their relative levels in stage 27 and 38 tadpole tissue were reflected in those oocytes injected with mRNA purified from tadpoles of the respective stages. We suggest that this oocyte translation system combined with immuaostaining provides for rapid analysis of changes in levels of antigen coding mRNAs throughout development.     

Multistage aqueous two‐phase extraction of a monoclonal antibody from cell supernatant

This article presents results of continuous multistage aqueous two‐phase extraction of an immunoglobulin G1 from cell supernatant in a mixer‐settler unit. An aqueous two‐phase system consisting of polyethylene glycol 2000, phosphate salt, and water was applied without and with sodium chloride (NaCl). Influences of different parameters such as throughput, phase ratio, and stage number on the extraction performance were analyzed. For systems without NaCl, the extraction was carried out as a washing step. An increase of stage number from one to five stages enabled to increase the immunoglobulin G1 purity from 11.8 to 32.6% at a yield of nearly 90%. Furthermore, a reduction of product phase volume due to a higher phase ratio led to an increase of purity from 20.8 to 29.6% in a three‐stage countercurrent extraction. For experiments with NaCl moderate partitioning conditions were adjusted by adding 8 wt% NaCl. In that case, the extraction was carried out as a stripping step. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:925–936, 2015