Determination of amlodipine using terbium‐sensitized luminescence in the presence of europium(III) as a co‐luminescence reagent

A sensitive time‐resolved luminescence method for the determination of amlodipine (AM) in methanol and in aqueous solution is described. The method is based on the luminescence sensitization of terbium (Tb³⁺) by formation of a ternary complex with AM in the presence of tri‐n‐octylphosphine oxide (TOPO) as co‐ligand, dodecylbenzenesulfate as surfactant and europium ion as a co‐luminescence reagent. The signal for Tb–AM–TOPO is monitored at λ_ex = 242 nm and λ_em = 550 nm. Optimum conditions for the formation of the complex in aqueous system were 0.015 m Tris (hydroxylmethyl) amino methane buffer, pH 9.0, TOPO (1.0 × 10^–4 m ), Eu³⁺ (2.0 × 10^–7 m ), dodecylbenzenesulfate (0.14%) and 6.0 × 10^–5 m of Tb³⁺, which allows the determination of 10–50 ppb of AM with a limit of detection of 1.2 ppb. The relative standard deviations of the method range between 0.1 and 0.2% indicated excellent reproducibility of the method. The proposed method was successfully applied for the assay of AM in pharmaceutical formulations and in plasma samples. Average recoveries of 98.5 ± 0.2% and 95.2 ± 0.2% were obtained for AM in tablet and plasma samples respectively. Copyright © 2013 John Wiley & Sons, Ltd.     

Fluorescence enhancement of europium (III) perchlorate by 1,10‐phenanthroline on the 1‐(naphthalen‐2‐yl)‐2‐(phenylsulthio)ethanone complex and luminescence mechanism

A novel ligand, 1‐(naphthalen‐2‐yl)‐2‐(phenylsulthio)ethanone was synthesized using a new method and its two europium (Eu) (III) complexes were synthesized. The compounds were characterized by elemental analysis, coordination titration analysis, molar conductivity, infrared, thermo gravimetric analyzer‐differential scanning calorimetry (TGA‐DSC), ¹H NMR and UV spectra. The composition was suggested as EuL₅ · (ClO₄)₃ · 2H₂O and EuL₄ · phen(ClO₄)₃ · 2H₂O (L = C₁₀H₇COCH₂SOC₆H₅). The fluorescence spectra showed that the Eu(III) displayed strong characteristic metal‐centered fluorescence in the solid state. The ternary rare earth complex showed stronger fluorescence intensity than the binary rare earth complex in such material. The strongest characteristic fluorescence emission intensity of the ternary system was 1.49 times as strong as that of the binary system. The phosphorescence spectra were also discussed. Copyright © 2014 John Wiley & Sons, Ltd.     

Circularly polarized luminescence of Sm (III) and Eu (III) complexes with chiral ligand (R/S)‐BINAPO

Luminescent lanthanide (III) ions have been exploited for circularly polarized luminescence (CPL) for decades. However, very few of these studies have involved chiral samarium (III) complexes. Complexes are prepared by mixing axial chiral ligands (R/S))‐2,2’‐bis(diphenylphosphoryl)‐1,1′‐binaphthyl (BINAPO) with europium and samarium Tris (trifluoromethane sulfonate) (Eu (OTf)₃ and Sm (OTf)₃). Luminescence‐based titration shows that the complex formed is Ln((R/S)‐BINAPO)₂(OTf)₃, where Ln = Eu or Sm. The CPL spectra are reported for Eu((R/S)‐BINAPO)₂(OTf)₃ and Sm((R/S)‐BINAPO)₂(OTf)₃. The sign of the dissymmetry factors, g_em, was dependent upon the chirality of the BINAPO ligand, and the magnitudes were relatively large. Of all of the complexes in this study, Sm((S)‐BINAPO)₂(OTf)₃ has the largest g_em = 0.272, which is one of the largest recorded for a chiral Sm³⁺ complex. A theoretical three‐dimensional structural model of the complex that is consistent with the experimental observations is developed and refined. This report also shows that (R/S)‐BINAPO are the only reported ligands where g_em (Sm³⁺) > g_em (Eu³⁺).     

Synthesis and properties of a new red luminescence europium complex containing a 2‐(benzimidazol‐2‐yl)‐8‐octyloxyquinoline as the second ligand

A new Eu(III) complex, Eu(III)(DBM)₃BIOQ, has been synthesized with dibenzoylmethane (DBM) as the first ligand and 2‐(benzimidazol‐2‐yl)‐8‐octyloxyquinoline (BIOQ) as the second ligand. The stability of the complex was analysed by DSC–TG. The results show that the Eu(III) complex has a relatively high thermal stability with a melting point of 235 °C and a decomposition temperature (onset) of 252 °C. The fluorescence properties of the compound were also investigated. The fluorescence results reveal that the as‐prepared complex shows the characteristic maximum emission spectra of Eu(III) at 611 nm (λ_ex = 350 nm). In addition, the photoluminescence spectrum of the complex in the solid state exhibits a single and symmetrical emission band at 611 nm, with a full width at half‐maximum of 4.7 nm, showing high colour purity. This finding indicates the possibility for the development of brighter red luminescent materials. Copyright © 2011 John Wiley & Sons, Ltd.     

Luminescent studies of binuclear ternary europium(III) pyridineoxide tetrazolate complexes containing bis‐phosphine oxide as auxiliary co‐ligands

A new class of antenna chromophores so called ‘tetrazolates’ have not been explored much for lanthanide luminescencent complexes. However, we have already published several articles considering pyridineoxide tetrazolates as sensitizer with lanthanide ions. Although this class of antenna attracted much less attention because of its poor photoluminescence quantum yields (tris‐pyridineoxide tetrazolate europium complex = 13% in solution) we tried and successfully achieved to improve the photoluminescence quantum yields for this particular antenna molecule by replacing coordinated water from the inner coordination sphere of europium ion by introducing phosphine oxides as additional chromophore. In the present article the two bis‐phosphine oxides attach two molecules of tris‐pyridineoxide tetrazolate europium(III) complex which leads to the improvement of the overall molar absorption coefficients as well as photo‐physical properties of the complexes. We found more than two‐fold increase (31% in solution) in photoluminescence quantum yield with one of the coordinated phosphine oxides comparing with that of tris‐pyridineoxide tetrazolate europium(III) complex.     

Synthesis,characterization and luminescent properties of europium complexes with 2,4,6‐tris‐(2‐pyridyl)‐s‐triazine as highly efficient sensitizers

Using 2,4,6‐tris‐(2‐pyridyl)‐s‐triazine (TPTZ) as a neutral ligand, and p‐hydroxybenzoic acid, terephthalic acid and nitrate as anion ligands, five novel europium complexes have been synthesized. These complexes were characterized using elemental analysis, rare earth coordination titrations, UV/vis absorption spectroscopy and infrared spectroscopy. Luminescence spectra, luminescence lifetime and quantum efficiency were investigated and the mechanism discussed in depth. The results show that the complexes have excellent emission intensities, long emission lifetimes and high quantum efficiencies. The superior luminescent properties of the complexes may be because the triplet energy level of the ligands matches well with the lowest excitation state energy level of Eu³⁺. Moreover, changing the ratio of the ligands and metal ions leads to different luminescent properties. Among the complexes, Eu₂(TPTZ)₂(C₈H₄O₄)(NO₃)₄(C₂H₅OH)·H₂O shows the strongest luminescence intensity, longest emission lifetime and highest quantum efficiency. Copyright © 2015 John Wiley & Sons, Ltd.     

Chemiluminescence determination of naproxen based on europium(III)‐sensitized KIO4–H2O2 reaction

A simple and sensitive chemiluminescence (CL) method combined with flow injection technique was developed for the determination of naproxen. It was based upon the weak CL signal arising from the reaction of KIO₄ with H₂O₂ being significantly increased by naproxen in the presence of europium(III) ion. The experimental conditions that affected the CL signal were carefully optimized and the CL reaction mechanism was briefly discussed. Under the optimum conditions, the increment of CL intensity was proportional to the concentration of naproxen ranging from 5.0 × 10^?8 to 5.0 × 10^?6 g/mL. The detection limit was 1 × 10^?8 g/mL naproxen and the relative standard deviation for 5.0 × 10^?7 g/mL naproxen solution was 2.1% (n = 11). The proposed method was applied to the determination of naproxen in tablets and in spiked human urine samples with satisfactory results. Copyright © 2009 John Wiley & Sons, Ltd.     

Luminescence enhancement of terbium(III) perchlorate by 2,2′‐dipyridyl on bis(benzylsulfinyl)methane complex and luminescence mechanism

A novel ternary complex, Tb₂L₄·L′·(ClO₄)₆·8H₂O, has been synthesized using bis(benzylsulfinyl)methane as the first ligand L and 2,2′‐dipyridyl as the second ligand L′. The ternary complex was characterized by element analysis, molar conductivity, coordination titration analysis, infrared, thermogravimetric‐differential scanning calorimetric and ultraviolet spectra. The results indicated that the composition of the complex was Tb₂L₄·L′·(ClO₄)₆·8H₂O (L = C₆H₅CH₂SOCH₂SOCH₂C₆H₅; L′ = Dipy). Fourier transform infrared results revealed that the perchlorate group was bonded with the Tb(III) ion by the oxygen atom, and the coordination was bidentate. The fluorescent spectra illustrated that the complex displayed characteristic fluorescence in the solid state. After the introduction of the second ligand, 2,2‐dipyridyl, the relative emission intensity and fluorescence lifetime of the ternary complex Tb₂L₄·L′·(ClO₄)₆·8H₂O were enhanced compared to the binary complex TbL_2.5(ClO₄)₃·3H₂O. This indicated that the presence of both organic ligand bis(benzylsulfinyl)methane and the second ligand 2,2‐dipyridyl could sensitize the fluorescence intensity of Tb(III) ion, and introduction of the 2,2‐dipyridyl group resulted in an enhancement of the fluorescence of the Tb(III) ternary rare earth complex. The strongest characteristic fluorescence emission intensity of the ternary complex was 9.36 times that of the binary complex. The phosphorescence spectra and fluorescence lifetime of the complex were also measured. Copyright © 2014 John Wiley & Sons, Ltd.     

Circularly polarized luminescence of Eu(III) complexes with chiral 1,1′-bi-2-naphtol-derived bisphosphate ligands

The interest for lanthanide circularly polarized luminescence (CPL) has been quickly growing for 10 years. However, very few of these studies have involved correlation between the dissymmetry factor (g_lum) and the chemical modifications in a series of chiral ligands. Four polymeric compounds of Eu(III) were prepared by using a series of binaphtyl derivatives for which the size of the π system as well as the number of stereogenic elements (i.e., the binaphtyl moiety) are modulated. The resulting {[Eu(hfac)₃((S)/(R)-L^x)]}_n (x = 1 and 3) and {[Eu(hfac)₃((S,S,S)/(R,R,R)-L^x)]}_n (x = 2 and 4) have been characterized by powder X-ray diffraction by comparison with the X-ray structures on single crystal of the Dy(III) analogs. In solution, the structure of the complexes is deeply modified and becomes monomeric. The nature of the ligand induces change in the shape of the CPL spectra in CH₂Cl₂ solution. Furthermore, a large |g_lum| = 0.12 of the magnetic-dipole transition for the [Eu(hfac)₃((S,S,S)/(R,R,R)-L²)] complex involving the ligand with three stereogenic elements and an extended ?? system has been measured. This report also shows CPL measurements in solid state for the series of {[Eu(hfac)₃((S)/(R)-L^x)]}_n (x = 1 and 3) and {[Eu(hfac)₃((S,S,S)/(R,R,R)-L^x)]}_n (x = 2 and 4) polymers.     

Synthesis and luminescence properties of 2‐(benzylcarbamoyl)phenyl derivatives and their europium complexes

Six novel 2‐(benzylcarbamoyl)phenyl derivatives were synthesized and characterized by ¹H‐NMR, mass spectrometry, infrared spectra and elemental analysis. Their europium complexes were prepared and characterized by elemental analysis, EDTA titrimetric analysis, IR and UV spectra as well as molar conductivity measurements. The luminescence properties of these complexes were investigated and results show that 2‐(benzylcarbamoyl)phenyl derivatives possess high selectivity and good coordination with the europium ion. Complex Eu‐2‐(benzylcarbamoyl)phenyl‐2‐phenylacetate showed green luminescence that was emitted by the ligand of 2‐(benzylcarbamoyl)phenyl‐2‐phenylacetate, while other complexes showed the characteristic red luminescence of europium ion and also possessed high luminescence intensity. Copyright © 2012 John Wiley & Sons, Ltd.     

Effect of γ‐irradiation on thermal and thermoluminescence properties of polystyrene/europium (III) oxide composite film

In the present study, polystyrene:europium (III) oxide polymer films at a ratio of 95:5 wt% were prepared using a solution casting technique. These polymeric films were irradiated with 5, 25 and 50 kGy γ‐radiation doses and their thermoluminescence (TL) and thermal properties were studied as a function of radiation dose. Analysis of Fourier transform infrared spectra revealed different modes of vibration and polymer–filler interaction. Reduction of vibrational modes with radiation dose was observed. The TL glow curve intensity was observed to increase with increasing radiation dose and to become broader in the 378 K and 444 K regions. Detrapping of electrons implied by the glow curve was caused by thermally induced macromolecular motion, concurrent with β‐relaxation in polystyrene. The TL glow curve parameters were computed using a glow curve deconvolution method. Differential scanning calorimetry analysis indicated that the glass transition temperature (T_g) increased with increase in dose, suggesting crosslinking of the polymer chain. Scanning electron microscopy analysis evidenced the change in surface morphology due to γ‐irradiation.     

Synthesis and luminescence properties of novel 8‐hydroxyquinoline derivatives and their Eu(III) complexes

Six novel 8‐hydroxyquinoline derivatives were synthesized using 2‐methyl‐8‐hydroxyquinoline and para‐substituted phenol as the main starting materials, and were characterized by ¹H nuclear magnetic resonance (NMR), mass spectrometry (MS), ultraviolet (UV) light analysis and infra‐red (IR) light analysis. Their complexes with Eu(III) were also prepared and characterized by elemental analysis, molar conductivity, UV light analysis, IR light analysis, and thermogravimetric–differential thermal analysis (TG–DTA). The results showed that the ligand coordinated well with Eu(III) ions and had excellent thermal stability. The structure of the target complex was EuY^1–6(NO₃)₃.2H₂O. The luminescence properties of the target complexes were investigated, the results indicated that all target complexes had favorable luminescence properties and that the introduction of an electron‐donating group could enhance the luminescence intensity of the corresponding complexes, but the addition of an electron‐withdrawing group had the opposite effect. Among all the target complexes, the methoxy‐substituted complex (–OCH₃) had the highest fluorescence intensity and the nitro‐substituted complex (–NO₂) had the weakest fluorescence intensity. The results showed that 8‐hydroxyquinoline derivatives had good energy transfer efficiency for the Eu(III) ion. All the target complexes had a relatively high fluorescence quantum yield. The fluorescence quantum yield of the complex EuY³(NO₃)₃.2H₂O was highest among all target complexes and was up to 0.628. Because of excellent luminescence properties and thermal stabilities of the Eu(III) complexes, they could be used as promising candidate luminescent materials.     

No effect of host–parasite co‐evolution on host range expansion

Antagonistic co‐evolution between hosts and parasites (reciprocal selection for resistance and infectivity) is hypothesized to play an important role in host range expansion by selecting for novel infectivity alleles, but tests are lacking. Here, we determine whether experimental co‐evolution between a bacterium (Pseudomonas fluorescens SBW25) and a phage (SBW25Φ2) affects interstrain host range: the ability to infect different strains of P. fluorescens other than SBW25. We identified and tested a genetically and phenotypically diverse suite of co‐evolved phage variants of SBW25Φ2 against both sympatric and allopatric co‐evolving hosts (P. fluorescens SBW25) and a large set of other P. fluorescens strains. Although all co‐evolved phage had a greater host range than the ancestral phage and could differentially infect co‐evolved variants of P. fluorescens SBW25, none could infect any of the alternative P. fluorescens strains. Thus, parasite generalism at one genetic scale does not appear to affect generalism at other scales, suggesting fundamental genetic constraints on parasite adaptation for this virus.     

Recovery of poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) from Ralstonia eutropha cultures with non‐halogenated solvents

Reduced downstream costs, together with high purity recovery of polyhydroxyalkanoate (PHA), will accelerate the commercialization of high quality PHA‐based products. In this work, a process was designed for effective recovery of the copolymer poly(hydroxybutyrate‐co‐hydroxyhexanoate) (P(HB‐co‐HHx)) containing high levels of HHx (>15 mol%) from Ralstonia eutropha biomass using non‐halogenated solvents. Several non‐halogenated solvents (methyl isobutyl ketone, methyl ethyl ketone, and butyl acetate and ethyl acetate) were found to effectively dissolve the polymer. Isoamyl alcohol was found to be not suitable for extraction of polymer. All PHA extractions were performed from both dry and wet cells at volumes ranging from 2 mL to 3 L using a PHA to solvent ratio of 2% (w/v). Ethyl acetate showed both high recovery levels and high product purities (up to 99%) when using dry cells as starting material. Recovery from wet cells, however, eliminates a biomass drying step during the downstream process, potentially saving time and cost. When wet cells were used, methyl isobutyl ketone (MIBK) was shown to be the most favorable solvent for PHA recovery. Purities of up to 99% and total recovery yields of up to 84% from wet cells were reached. During polymer recovery with either MIBK or butyl acetate, fractionation of the extracted PHA occurred, based on the HHx content of the polymer. PHA with higher HHx content (17–30 mol%) remained completely in solution, while polymer with a lower HHx content (11–16 mol%) formed a gel‐like phase. All PHA in solution could be precipitated by addition of threefold volumes of n‐hexane or n‐heptane to unfiltered PHA solutions. Effective recycling of the solvents in this system is predicted due to the large differences in the boiling points between solvent and precipitant. Our findings show that two non‐halogenated solvents are good candidates to replace halogenated solvents like chloroform for recovery of high quality PHA. Biotechnol. Bioeng. 2013; 110: 461–470. © 2012 Wiley Periodicals, Inc.     

Investigation of ifosfamide nephrotoxicity induced in a liver–kidney co‐culture biochip

In this article, we present a liver–kidney co‐culture model in a micro fluidic biochip. The liver was modeled using HepG2/C3a and HepaRG cell lines and the kidney using MDCK cell lines. To demonstrate the synergic interaction between both organs, we investigated the effect of ifosfamide, an anticancerous drug. Ifosfamide is a prodrug which is metabolized by the liver to isophosforamide mustard, an active metabolite. This metabolism process also leads to the formation of chloroacetaldehyde, a nephrotoxic metabolite and acrolein a urotoxic one. In the biochips of MDCK cultures, we did not detect any nephrotoxic effects after 72 h of 50 µM ifosfamide exposure. However, in the liver–kidney biochips, the same 72 h exposure leads to a nephrotoxicity illustrated by a reduction of the number of MDCK cells (up to 30% in the HepaRG‐MDCK) when compared to untreated co‐cultures or treated MDCK monocultures. The reduction of the MDCK cell number was not related to a modification of the cell cycle repartition in ifosfamide treated cases when compared to controls. The ifosfamide biotransformation into 3‐dechloroethylifosfamide, an equimolar byproduct of the chloroacetaldehyde production, was detected by mass spectrometry at a rate of apparition of 0.3 ± 0.1 and 1.1 ± 0.3 pg/h/biochips in HepaRG monocultures and HepaRG‐MDCK co‐cultures respectively. Any metabolite was detected in HepG2/C3a cultures. Furthermore, the ifosfamide treatment in HepaRG‐MDCK co‐culture system triggered an increase in the intracellular calcium release in MDCK cells on contrary to the treatment on MDCK monocultures. As 3‐dechloroethylifosfamide is not toxic, we have tested the effect of equimolar choloroacetaldehyde concentration onto the MDCK cells. At this concentration, we found a quite similar calcium perturbation and MDCK nephrotoxicity via a reduction of 30% of final cell numbers such as in the ifosfamide HepaRG‐MDCK co‐culture experiments. Our results suggest that ifosfamide nephrotoxicity in a liver–kidney micro fluidic co‐culture model using HepaRG‐MDCK cells is induced by the metabolism of ifosfamide into chloroacetaldehyde whereas this pathway is not functional in HepG2/C3a‐MDCK model. This study demonstrates the interest in the development of systemic organ–organ interactions using micro fluidic biochips. It also illustrated their potential in future predictive toxicity model using in vitro models as alternative methods. Biotechnol. Bioeng. 2013; 110: 597–608. © 2012 Wiley Periodicals, Inc.     

Redox potential changes during ATP‐dependent corrinoid reduction determined by redox titrations with europium(II)–DTPA

Corrinoids are essential cofactors of enzymes involved in the C₁ metabolism of anaerobes. The active, super‐reduced [Co^I] state of the corrinoid cofactor is highly sensitive to autoxidation. In O‐demethylases, the oxidation to inactive [Co^II] is reversed by an ATP‐dependent electron transfer catalyzed by the activating enzyme (AE). The redox potential changes of the corrinoid cofactor, which occur during this reaction, were studied by potentiometric titration coupled to UV/visible spectroscopy. By applying europium(II)–diethylenetriaminepentaacetic acid (DTPA) as a reductant, we were able to determine the midpoint potential of the [Co^II]/[Co^I] couple of the protein‐bound corrinoid cofactor in the absence and presence of AE and/or ATP. The data revealed that the transfer of electrons from a physiological donor to the corrinoid as the electron‐accepting site is achieved by increasing the potential of the corrinoid cofactor from ?530 ± 15 mV to ?250 ± 10 mV (E_SHE, pH 7.5). The first 50 to 100 mV of the shift of the redox potential seem to be caused by the interaction of nucleotide‐bound AE with the corrinoid protein or its cofactor. The remaining 150–200 mV had to be overcome by the chemical energy of ATP hydrolysis. The experiments revealed that Eu(II)–DTPA, which was already known as a powerful reducing agent, is a suitable electron donor for titration experiments of low‐potential redox centers. Furthermore, the results of this study will contribute to the understanding of thermodynamically unfavorable electron transfer processes driven by the power of ATP hydrolysis.     

En route to economical eco‐friendly solvent system in enhancing sustainable recovery of poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) copolymer

Separation of poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) [P(3HB‐co‐4HB)] from bacterial cell matter is a critical step in the downstream process with respect to material quality and eco‐balance as P(3HB‐co‐4HB) is widely used for biomedical applications. Therefore, an efficient and eco‐based extraction of P(3HB‐co‐4HB) using a combination of NaOH and Lysol in digesting the non‐polymeric cell material (NPCM) digestion is developed. The NaOH and Lysol show synergistic influence on the copolymer extraction at a high purity and recovery of 97 and 98 wt% respectively. The optimized cell digestion method was found applicable to a vast batch of cells containing copolymers from various 4HB monomer compositions. At the largest extraction volume of 100 L, P(3HB‐co‐4HB) with a purity of 89 wt% was extracted with a maximum recovery of 90 wt%. The method developed has also eliminated the cell pretreatment step. The extraction method developed in this research has not only produced an economic and efficient copolymer recovery but has also retained the copolymer quality, in term of its molecular weight and thermal properties. It demonstrates a practical and promising downstream processing method in recovering the copolymer effectively from the bacterial biomass.     

Chemiluminescence method for the determination of piroxicam by the enhancement of the tris‐(4,7‐diphenyl‐1,10‐phenanthrolinedisulphonic acid) ruthenium(II) (RuBPS)–cerium(IV) system and its application

A simple, rapid chemiluminescence (CL) method was described for the determination of piroxicam, a commonly used analgesic agent drug. A strong CL signal was detected when cerium(IV) sulphate was injected into tris‐(4,7‐diphenyl‐1,10‐phenanthrolinedisulphonic acid) ruthenium(II) (RuBPS)–piroxicam solution. The CL signal was proportional to the concentration of piroxicam in the range 2.8 × 10^–8–1.2 × 10^–5 mol/L. The detection limit was 2 × 10^–8 mol/L and the relative standard deviation (RSD) was 3.7% (c = 7.0 × 10^–7 mol/L piroxicam; n = 11). The proposed method was applied to the determination of piroxicam in pharmaceutical preparations in capsules, spiked serum and urine samples with satisfactory results. Copyright © 2008 John Wiley & Sons, Ltd.