Diversity in host clone performance within a Chinese hamster ovary cell line

Much effort has been expended to improve the capabilities of individual Chinese hamster ovary (CHO) host cell lines to synthesize recombinant therapeutic proteins (rPs). However, given the increasing variety in rP molecular types and formats it may be advantageous to employ a toolbox of CHO host cell lines in biomanufacturing. Such a toolbox would contain a panel of hosts with specific capabilities to synthesize certain molecular types at high volumetric concentrations and with the correct product quality (PQ). In this work, we examine a panel of clonally derived host cell lines isolated from CHOK1SV for the ability to manufacture two model proteins, an IgG4 monoclonal antibody (Mab) and an Fc‐fusion protein (etanercept). We show that these host cell lines vary in their relative ability to synthesize these proteins in transient and stable pool production format. Furthermore, we examined the PQ attributes of the stable pool‐produced Mab and etanercept (by N‐glycan ultra performance liquid chromatography (UPLC) and liquid chromatography ‐ tandem mass spectrometry (LC‐MS/MS), respectively), and uncovered substantial variation between the host cell lines in Mab N‐glycan micro‐heterogeneity and etanercept N and O‐linked macro‐heterogeneity. To further investigate the capabilities of these hosts to act as cell factories, we examined the glycosylation pathway gene expression profiles as well as the levels of endoplasmic reticulum (ER) and mitochondria in the untransfected hosts. We uncovered a moderate correlation between ER mass and the volumetric product concentration in transient and stable pool Mab production. This work demonstrates the utility of leveraging diversity within the CHOK1SV pool to identify new host cell lines with different performance characteristics. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:1187–1200, 2015     

Improving the efficiency of CHO cell line generation using glutamine synthetase gene knockout cells

Although Chinese hamster ovary (CHO) cells, with their unique characteristics, have become a major workhorse for the manufacture of therapeutic recombinant proteins, one of the major challenges in CHO cell line generation (CLG) is how to efficiently identify those rare, high‐producing clones among a large population of low‐ and non‐productive clones. It is not unusual that several hundred individual clones need to be screened for the identification of a commercial clonal cell line with acceptable productivity and growth profile making the cell line appropriate for commercial application. This inefficiency makes the process of CLG both time consuming and laborious. Currently, there are two main CHO expression systems, dihydrofolate reductase (DHFR)‐based methotrexate (MTX) selection and glutamine synthetase (GS)‐based methionine sulfoximine (MSX) selection, that have been in wide industrial use. Since selection of recombinant cell lines in the GS‐CHO system is based on the balance between the expression of the GS gene introduced by the expression plasmid and the addition of the GS inhibitor, L‐MSX, the expression of GS from the endogenous GS gene in parental CHOK1SV cells will likely interfere with the selection process. To study endogenous GS expression's potential impact on selection efficiency, GS‐knockout CHOK1SV cell lines were generated using the zinc finger nuclease (ZFN) technology designed to specifically target the endogenous CHO GS gene. The high efficiency (～2%) of bi‐allelic modification on the CHO GS gene supports the unique advantages of the ZFN technology, especially in CHO cells. GS enzyme function disruption was confirmed by the observation of glutamine‐dependent growth of all GS‐knockout cell lines. Full evaluation of the GS‐knockout cell lines in a standard industrial cell culture process was performed. Bulk culture productivity improved two‐ to three‐fold through the use of GS‐knockout cells as parent cells. The selection stringency was significantly increased, as indicated by the large reduction of non‐producing and low‐producing cells after 25 µM L‐MSX selection, and resulted in a six‐fold efficiency improvement in identifying similar numbers of high‐productive cell lines for a given recombinant monoclonal antibody. The potential impact of GS‐knockout cells on recombinant protein quality is also discussed. Biotechnol. Bioeng. 2012; 109:1007–1015. © 2011 Wiley Periodicals, Inc.     

Auditioning of CHO host cell lines using the artificial chromosome expression (ACE) technology

In order to maximize recombinant protein expression in mammalian cells many factors need to be considered such as transfection method, vector construction, screening techniques and culture conditions. In addition, the host cell line can have a profound effect on the protein expression. However, auditioning or directly comparing host cell lines for optimal protein expression may be difficult since most transfection methods are based on random integration of the gene of interest into the host cell genome. Thus it is not possible to determine whether differences in expression between various host cell lines are due to the phenotype of the host cell itself or genetic factors such as gene copy number or gene location. To improve cell line generation, the ACE System was developed based on pre‐engineered artificial chromosomes with multiple recombination acceptor sites. This system allows for targeted transfection and has been effectively used to rapidly generate stable CHO cell lines expressing high levels of monoclonal antibody. A key feature of the ACE System is the ability to isolate and purify ACEs containing the gene(s) of interest and transfect the same ACEs into different host cell lines. This feature allows the direct auditioning of host cells since the host cells have been transfected with ACEs that contain the same number of gene copies in the same genetic environment. To investigate this audition feature, three CHO host cell lines (CHOK1SV, CHO‐S and DG44) were transfected with the same ACE containing gene copies of a human monoclonal IgG1 antibody. Clonal cell lines were generated allowing a direct comparison of antibody expression and stability between the CHO host cells. Results showed that the CHOK1SV host cell line expressed antibody at levels of more than two to five times that for DG44 and CHO‐S host cell lines, respectively. To confirm that the ACE itself was not responsible for the low antibody expression seen in the CHO‐S based clones, the ACE was isolated and purified from these cells and transfected back into fresh CHOK1SV cells. The resulting expression of the antibody from the ACE newly transfected into CHOK1SV increased fivefold compared to its expression in CHO‐S and confirmed that the differences in expression between the different CHO host cells was due to the cell phenotype rather than differences in gene copy number and/or location. These results demonstrate the utility of the ACE System in providing a rapid and direct technique for auditioning host cell lines for optimal recombinant protein expression. Biotechnol. Bioeng. 2009; 104: 526–539 © 2009 Wiley Periodicals, Inc.     

Development of a highly-efficient CHO cell line generation system with engineered SV40E promoter

Chinese hamster ovary (CHO) cells have been one of the most widely used host cells for the manufacture of therapeutic recombinant proteins. An effective and efficient clinical cell line development process, which could quickly identify those rare, high-producing cell lines among a large population of low and non-productive cells, is of considerable interest to speed up biological drug development. In the glutamine synthetase (GS)-CHO expression system, selection of top-producing cell lines is based on controlling the balance between the expression level of GS and the concentration of its specific inhibitor, l-methionine sulfoximine (MSX). The combined amount of GS expressed from plasmids that have been introduced through transfection and the endogenous CHO GS gene determine the stringency and efficiency of selection. Previous studies have shown significant improvement in selection stringency by using GS-knockout CHO cells, which eliminate background GS expression from the endogenous GS gene in CHOK1SV cells. To further improve selection stringency, a series of weakened SV40E promoters have been generated and used to modulate plasmid-based GS expression with the intent of manipulating GS-CHO selection, finely adjusting the balance between GS expression and GS inhibitor (MSX) levels. The reduction of SV40E promoter activities have been confirmed by TaqMan RT-PCR and GFP expression profiling. Significant productivity improvements in both bulk culture and individual clonal cell line have been achieved with the combined use of GS-knockout CHOK1SV cells and weakened SV40E promoters driving GS expression in the current cell line generation process. The selection stringency was significantly increased, as indicated by the shift towards higher distribution of producing-cell populations, even with no MSX added into cell culture medium. The potential applications of weakened SV40E promoter and GS-knockout cells in development of targeted integration and transient CHO expression systems are also discussed.     

Chinese hamster ovary K1 host cell enables stable cell line development for antibody molecules which are difficult to express in DUXB11‐derived dihydrofolate reductase deficient host cell

Therapeutic monoclonal antibodies (mAb) are often produced in Chinese hamster ovary (CHO) cells. Three commonly used CHO host cells for generating stable cell lines to produce therapeutic proteins are dihydrofolate reductase (DHFR) positive CHOK1, DHFR‐deficient DG44, and DUXB11‐based DHFR deficient CHO. Current Genentech commercial full‐length antibody products have all been produced in the DUXB11‐derived DHFR‐deficient CHO host. However, it has been challenging to develop stable cell lines producing an appreciable amount of antibody proteins in the DUXB11‐derived DHFR‐deficient CHO host for some antibody molecules and the CHOK1 host has been explored as an alternative approach. In this work, stable cell lines were developed for three antibody molecules in both DUXB11‐based and CHOK1 hosts. Results have shown that the best CHOK1 clones produce about 1 g/l for an antibody mAb1 and about 4 g/l for an antibody mAb2 in 14‐day fed batch cultures in shake flasks. In contrast, the DUXB11‐based host produced ～0.1 g/l for both antibodies in the same 14‐day fed batch shake flask production experiments. For an antibody mAb3, both CHOK1 and DUXB11 host cells can generate stable cell lines with the best clone in each host producing ～2.5 g/l. Additionally, studies have shown that the CHOK1 host cell has a larger endoplasmic reticulum and higher mitochondrial mass. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:980–985, 2013     

CHOK1SV GS-KO SSI expression system: A combination of the Fer1L4 locus and glutamine synthetase selection

There are an ever-increasing number of biopharmaceutical candidates in clinical trials fueling an urgent need to streamline the cell line development process. A critical part of the process is the methodology used to generate and screen candidate cell lines compatible with GMP manufacturing processes. The relatively large amount of clone phenotypic variation observed from conventional “random integration” (RI)-based cell line construction is thought to be the result of a combination of the position variegation effect, genome plasticity and clonal variation. Site-specific integration (SSI) has been used by several groups to temper the influence of the position variegation effect and thus reduce variability in expression of biopharmaceutical candidates. Following on from our previous reports on the application of the Fer1L4 locus for SSI in CHOK1SV (10E9), we have combined this locus and a CHOK1SV glutamine synthetase knockout (GS-KO) host to create an improved expression system. The host, CHOK1SV GS-KO SSI (HD7876), was created by homology directed integration of a targetable landing pad flanked with incompatible Frt sequences in the Fer1L4 gene. The targeting vector contains a promoterless GS expression cassette and monoclonal antibody (mAb) expression cassettes, flanked by Frt sites compatible with equivalent sites flanking the landing pad in the host cell line. SSI clones expressing four antibody candidates, selected in a streamlined cell line development process, have mAb titers which rival RI (1.0–4.5 g/L) and robust expression stability (100% of clones stable through the 50 generation “manufacturing window” which supports commercial manufacturing at 12,000 L bioreactor scale).     

Methionine sulfoximine supplementation enhances productivity in GS–CHOK1SV cell lines through glutathione biosynthesis

In Lonza Biologics' GS Gene Expression System?, recombinant protein‐producing GS–CHOK1SV cell lines are generated by transfection with an expression vector encoding both GS and the protein product genes followed by selection in MSX and glutamine‐free medium. MSX is required to inhibit endogenous CHOK1SV GS, and in effect create a glutamine auxotrophy in the host that can be complemented by the expression vector encoded GS in selected cell lines. However, MSX is not a specific inhibitor of GS as it also inhibits the activity of GCL (a key enzyme in the glutathione biosynthesis pathway) to a similar extent. Glutathione species (GSH and GSSG) have been shown to provide both oxidizing and reducing equivalents to ER‐resident oxidoreductases, raising the possibility that selection for transfectants with increased GCL expression could result in the isolation of GS–CHOKISV cell lines with improved capacity for recombinant protein production. In this study we have begun to address the relationship between MSX supplementation, the amount of intracellular GCL subunit and mAb production from a panel of GS–CHOK1SV cell lines. We then evaluated the influence of reduced GCL activity on batch culture of an industrially relevant mAb‐producing GS–CHOK1SV cell line. To the best of our knowledge, this paper describes for the first time the change in expression of GCL subunits and recombinant mAb production in these cell lines with the degree of MSX supplementation in routine subculture. Our data also shows that partial inhibition of GCL activity in medium containing 75 µM MSX increases mAb productivity, and its more specific inhibitor BSO used at a concentration of 80 µM in medium increases the specific rate of mAb production eight‐fold and the concentration in harvest medium by two‐fold. These findings support a link between the inhibition of glutathione biosynthesis and recombinant protein production in industrially relevant systems and provide a process‐driven method for increasing mAb productivity from GS–CHOK1SV cell lines. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 33:17–25, 2017     

Recombinase‐mediated cassette exchange (RMCE) for monoclonal antibody expression in the commercially relevant CHOK1SV cell line

To meet product quality and cost parameters for therapeutic monoclonal antibody (mAb) production, cell lines are required to have excellent growth, stability, and productivity characteristics. In particular, cell line generation stability is critical to the success of a program, especially where high cell line generation numbers are required for large in‐market supply. However, a typical process for developing such cell lines is laborious, lengthy, and costly. In this study, we applied a FLP/FRT recombinase‐mediated cassette exchange (RMCE) system to build a site‐specific integration (SSI) system for mAb expression in the commercially relevant CHOK1SV cell line. Using a vector with a FRT‐flanked mAb expression cassette, we generated a clonal cell line with good productivity, long‐term production stability, and low mAb gene‐copy number indicating the vector was located in a ‘hot‐spot.’ A SSI host cell line was made by removing the mAb genes from the ‘hot‐spot’ by RMCE, creating a ‘landing pad’ containing two recombination cassettes that allow targeting of one or two copies of recombinant genes. Cell lines made from this host exhibited excellent growth and productivity profiles, and stability for at least 100 generations in the absence of selection agents. Importantly, while clones containing two copies had higher productivity than single copy clones, both were stable over many generations. Taken together, this study suggests the use of FLP‐based RMCE to develop SSI host cells for mAb production in CHOK1SV offers significant savings in both resources and overall cell line development time, leading to a shortened ‘time‐to‐clinic’ for therapeutic mAbs. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:1645–1656, 2015     

Development of transfection and high-producer screening protocols for the CHOK1SV cell system

To date, the FDA has approved 18 monoclonal antibody (MAb) therapeutic drugs with targets ranging from asthma and rheumatoid arthritis to leukemia. Many of these approved products are produced in Chinese hamster ovary cells (CHO) making CHO a significant and relevant host system. We studied the applicability of CHOK1SV cells as a potential host cell line for MAb production in terms of timelines, achievable titers, transfectant stability, and reproducibility. CHOK1SV, developed by Lonza Biologics, is a suspension, protein-free-adapted CHOK1-derivative utilizing the glutamine synthetase (GS) gene expression system. CHOK1SV expresses the GS enzyme endogenously; thus, positive transfectants were obtained under the dual selection of methionine sulfoximine (MSX) and glutamine-free media. We examined outgrowth efficiencies, specific productivities, and achievable batch titers of three different IgG MAbs transfected into CHOK1SV. Reducing the MSX concentration in the initial selection medium resulted in a decreased incubation time required for transfectant colonies to appear. Specific productivities of “high-producers” ranged between 11 and 49 pg/c/d with batch titers ranging from 105 to 519 mg/L. Transfectant stability and the effects of MSX also were investigated, which indicated that the addition of MSX was necessary to maintain stable MAb production. Cell growth was stable regardless of MSX concentration.     

Rapid protein production using CHO stable transfection pools

During early preclinical development of therapeutic proteins, representative materials are often required for process development, such as for pharmacokinetic/pharmacodynamic studies in animals, formulation design, and analytical assay development. To rapidly generate large amounts of representative materials, transient transfection is commonly used. Because of the typical low yields with transient transfection, especially in CHO cells, here we describe an alternative strategy using stable transfection pool technology. Using stable transfection pools, gram quantities of monoclonal antibody (Mab) can be generated within 2 months post‐transfection. Expression levels for monoclonal antibodies can be achieved ranging from 100 mg/L to over 1000 mg/L. This methodology was successfully scaled up to a 200 L scale using disposable bioreactor technology for ease of rapid implementation. When fluorescence‐activated cell sorting was implemented to enrich the transfection pools for high producers, the productivity could be improved by about three‐fold. We also found that an optimal production time window exists to achieve the highest yield because the transfection pools were not stable and productivity generally decreased over length in culture. The introduction of Universal chromatin‐opening elements elements into the expression vectors led to significant productivity improvement. The glycan distribution of the Mab product generated from the stable transfection pools was comparable to that from the clonal stable cell lines. © 2010 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Gene amplification in Chinese hamster DNA repair deficient mutants

In order to study the possible relationship between gene amplification and DNA repair we analyzed the amplification of the CAD gene in four mutants hypersensitive to UV light (CHO43RO, CHO7PV, UV5 and UV61) isolated in vitro from Chinese hamster cell lines (CHO-K1 and AA8). These mutants are characterized by different defects in the nucleotide excision repair mechanism and represent complementation groups 1, 9, 2, and 6 respectively. To evaluate the amplification ability of each cell line we measured the rate of appearance of PALA resistant clones with the Luria and Delbrück fluctuation test. Resistance to PALA is mainly due to amplification of the CAD gene. In the mutants CHO43RO, UV5 and CHO7PV we reproducibly found an amplification rate lower than in the parental cell lines (2–5 times), while in UV61 the amplification rate was about 4 times higher. This result indicates that each mutant is characterized by a specific amplification ability and that the unefficient removal of UV induced DNA damage can be associated with either a higher or a lower amplification rate. However, the analysis of randomly isolated CHO-K1 clones with normal UV sensitivity has shown variability in their amplification ability, making it difficult to relate the specific amplification ability of the mutants to the DNA repair defect and suggesting clonal heterogeneity of the parental population.     

Differences in optimal pH and temperature for cell growth and antibody production between two Chinese hamster ovary clones derived from the same parental clone

To investigate clonal variations of recombinant Chinese hamster ovary (rCHO) clones in response to culture pH and temperature, serum-free suspension cultures of two antibody-producing CHO clones (clones A and B), which were isolated from the same parental clone by the limiting dilution method, were performed in a bioreactor at pH values in the range of 6.8-7.6, and two different temperatures, 33 degrees C and 37 degrees C. In regard to cell growth, clone A and clone B displayed similar responses to temperature, although their degree of response differed. In contrast, clones A and B displayed different responses to temperature in regard to antibody production. In the case of clone A, no significant increase in maximum antibody concentration was achieved by lowering the culture temperature. The maximum antibody concentration obtained at 33 degrees C (pH 7.4) and 37 degrees C (pH 7.0) were 82.0 +/- 2.6 and 73.2 +/- 4.1 microg/ml, respectively. On the other hand, in the case of clone B, an approximately 2.5-fold increase in maximum antibody concentration was achieved by lowering the culture temperature. The enhanced maximum antibody concentration of clone B at 33 degrees C (132.6 +/- 14.9 microg/ml at pH 7.2) was due to not only enhanced specific antibody productivity but also to prolonged culture longevity. At 33 degrees C, the culture longevity of clone A also improved, but not as much as that of clone B. Taken together, CHO clones derived from the same parental clone displayed quite different responses to culture temperature and pH with regards antibody production, suggesting that environmental parameters such as temperature and pH should be optimized for each CHO clone.     

Effects of clonal variation on growth, metabolism, and productivity in response to trophic factor stimulation: a study of Chinese hamster ovary cells producing a recombinant monoclonal antibody

The growth, metabolism, and productivity of five Chinese hamster ovary (CHO) clones were explored in response to stimulation with insulin (5 mg/L) and LONG^®R³IGF-I (20 μg/L or 100 μg/L). All five clones were derived from the same parental CHO cell line (DG44) and produced the same recombinant monoclonal antibody, with varying specific productivities. There was no uniform response among the clones to stimulation with the different trophic factors. One of the high productivity clones (clone D) exhibited significantly better growth in response to LONG^®R³IGF-I; whereas the other clones showed equivalent or slightly better growth in the presence of insulin. Three out of the five clones had higher specific productivities in the presence of insulin (although not statistically significant); one was invariant, and the final clone exhibited slightly higher specific productivity in the presence of LONG^®R³IGF-I. Total product titers exhibited moderate variation between culture conditions, again with neither trophic factor being clearly superior. Overall product titers were affected by variations in both integrated viable cell density and specific productivity. Nutrient uptake and metabolite generation patterns varied strongly between clones and much less with culture conditions. These results point to the need for careful clonal analysis when selecting clones, particularly for platform processes where media and culture conditions are predetermined.

Electronic supplementary material

The online version of this article (doi:10.1007/s10616-011-9388-z) contains supplementary material, which is available to authorized users.     

Model‐based investigation of intracellular processes determining antibody Fc‐glycosylation under mild hypothermia

Despite the positive effects of mild hypothermic conditions on monoclonal antibody (mAb) productivity (q_mAb) during mammalian cell culture, the impact of reduced culture temperature on mAb Fc‐glycosylation and the mechanism behind changes in the glycan composition are not fully established. The lack of knowledge about the regulation of dynamic intracellular processes under mild hypothermia restricts bioprocess optimization. To address this issue, a mathematical model that quantitatively describes Chinese hamster ovary (CHO) cell behavior and metabolism, mAb synthesis and mAb N‐linked glycosylation profile before and after the induction of mild hypothermia is constructed. Results from this study show that the model is capable of representing experimental results well in all of the aspects mentioned above, including the N‐linked glycosylation profile of mAb produced under mild hypothermia. Most importantly, comparison between model simulation results for different culture temperatures suggests the reduced rates of nucleotide sugar donor production and galactosyltransferase (GalT) expression to be critical contributing factors that determine the variation in Fc‐glycan profiles between physiological and mild hypothermic conditions in stable CHO transfectants. This is then confirmed using experimental measurements of GalT expression levels, thereby closing the loop between the experimental and the computational system. The identification of bottlenecks within CHO cell metabolism under mild hypothermic conditions will aid bioprocess optimization, for example, by tailoring feeding strategies to improve NSD production, or manipulating the expression of specific glycosyltransferases through cell line engineering. Biotechnol. Bioeng. 2017;114: 1570–1582. © 2016 The Authors. Biotechnology and Bioengineering Published by Wiley Periodicals Inc.     

Modulation of mAb quality attributes using microliter scale fed‐batch cultures

A high‐throughput DoE approach performed in a 96‐deepwell plate system was used to explore the impact of media and feed components on main quality attributes of a monoclonal antibody. Six CHO‐S derived clonal cell lines expressing the same monoclonal antibody were tested in two different cell culture media with six components added at three different levels. The resulting 384 culture conditions including controls were simultaneously tested in fed‐batch conditions, and process performance such as viable cell density, viability, and product titer were monitored. At the end of the culture, supernatants from each condition were purified and the product was analyzed for N‐glycan profiles, charge variant distribution, aggregates, and low molecular weight forms. The screening described here provided highly valuable insights into the factors and combination of factors that can be used to modulate the quality attributes of a molecule. The approach also revealed specific intrinsic differences of the selected clonal cell lines ‐ some cell lines were very responsive in terms of changes in performance or quality attributes, whereas others were less affected by the factors tested in this study. Moreover, it indicated to what extent the attributes can be impacted within the selected experimental design space. The outcome correlated well with confirmations performed in larger cell culture volumes such as small‐scale bioreactors. Being fast and resource effective, this integrated high‐throughput approach can provide information which is particularly useful during early stage cell culture development. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:571–583, 2014     

Generation of stable, high-producing CHO cell lines by lentiviral vector-mediated gene transfer in serum-free suspension culture

Lentivirus‐derived vectors (LVs) were studied for the generation of stable recombinant Chinese hamster ovary (CHO) cell lines. Stable pools and clones expressing the enhanced green fluorescent protein (eGFP) were selected via fluorescence‐activated cell sorting (FACS). For comparison, cell pools and cell lines were also generated by transfection, using the LV transfer plasmid alone. The level and stability of eGFP expression was greater in LV‐transduced cell lines and pools than in those established by transfection. CHO cells were also infected at two different multiplicities of infection with an LV co‐expressing eGFP and a tumor necrosis factor receptor:Fc fusion protein (TNFR:Fc). At 2‐day post‐infection, clonal cell lines with high eGFP‐specific fluorescence were recovered by FACS. These clones co‐expressed TNFR:Fc with yields of 50–250 mg/L in 4‐day cultures. The recovered cell lines maintained stable expression over 3 months in serum‐free suspension culture without selection. In conclusion, LV‐mediated gene transfer provided an efficient alternative to plasmid transfection for the generation of stable and high‐producing recombinant cell lines. Biotechnol. Bioeng. 2011; 108:600–610. © 2010 Wiley Periodicals, Inc.     

N‐linked glycosylation is an important parameter for optimal selection of cell lines producing biopharmaceutical human IgG

We studied the variations in N‐linked glycosylation of human IgG molecules derived from 105 different stable cell lines each expressing one of the six different antibodies. Antibody expression was based on glutamine synthetase selection technology in suspension growing CHO‐K1SV cells. The glycans detected on the Fc fragment were mainly of the core‐fucosylated complex type containing zero or one galactose and little to no sialic acid. The glycosylation was highly consistent for the same cell line when grown multiple times, indicating the robustness of the production and glycan analysis procedure. However, a twofold to threefold difference was observed in the level of galactosylation and/or non‐core‐fucosylation between the 105 different cell lines, suggesting clone‐to‐clone variation. These differences may change the Fc‐mediated effector functions by such antibodies. Large variation was also observed in the oligomannose‐5 glycan content, which, when present, may lead to undesired rapid clearance of the antibody in vivo. Statistically significant differences were noticed between the various glycan parameters for the six different antibodies, indicating that the variable domains and/or light chain isotype influence Fc glycosylation. The glycosylation altered when batch production in shaker was changed to fed‐batch production in bioreactor, but was consistent again when the process was scaled from 400 to 5,000 L. Taken together, the observed clone‐to‐clone glycosylation variation but batch‐to‐batch consistency provides a rationale for selection of optimal production cell lines for large‐scale manufacturing of biopharmaceutical human IgG. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009