2‐(4‐Ethoxy phenyl)‐4‐phenyl quinoline organic phosphor for solution processed blue organic light‐emitting diodes

This paper reports the synthesis and characterization of 2‐(4‐ethoxyphenyl)‐4‐phenyl quinoline (OEt‐DPQ) organic phosphor using an acid‐catalyzed Friedlander reaction and the preparation of blended thin films by molecularly doping OEt‐DPQ in poly(methyl methacrylate) (PMMA) at different wt%. The molecular structure of the synthesized phosphor was confirmed by Fourier transform infra‐red (FTIR) spectroscopy and nuclear magnetic resonance spectra (NMR). Surface morphology and percent composition of the elements were assessed by scanning electron microscopy (SEM) and energy dispersive analysis of X‐rays (EDAX). The thermal stability and melting point of OEt‐DPQ and thin films were probed by thermo‐gravimetric analysis (TGA)/differential thermal analysis (DTA) and were found to be 80°C and 113.6°C, respectively. UV–visible optical absorption spectra of OEt‐DPQ in the solid state and blended films produced absorption bands in the range 260–340 nm, while photoluminescence (PL) spectra of OEt‐DPQ in the solid state and blended thin films demonstrated blue emission that was registered at 432 nm when excited at 363–369 nm. However, solvated OEt‐DPQ in chloroform, tetrahydrofuran or dichloromethane showed a blue shift of 31–43 nm. Optical absorption and emission parameters such as molar extinction coefficient (ε), energy gap (E_g), transmittance (T), reflectance (R), refractive index (n), oscillator energy (E₀) and oscillator strength (f), quantum yield (φ_f), oscillator energy (E₀), dispersion energy (E_d), Commission Internationale de l'Éclairage (CIE) co‐ordinates and energy yield fluorescence (E_F) were calculated to assess the phosphor's suitability as a blue emissive material for opto‐electronic applications such as organic light‐emitting diodes (OLEDs), flexible displays and solid‐state lighting technology.     

Synthesis and characterization of novel europium β‐diketonate organic complexes for solid‐state lighting

Volatile Eu complexes, namely Eu(TTA)₃Phen, Eu_(x)Y_(1‐x)(TTA)₃ Phen; Eu_(x)Tb_(1‐x)(TTA)₃Phen; Eu, europium; Y, yttrium; Tb, Terbium; TTA, thenoyltrifluoroacetone; and Phen, 1,10 phenanthroline were synthesized by maintaining stichiometric ratio. Various characterization techniques such as X‐ray diffraction (XRD), photoluminescence (PL) and thermo gravimetric analysis/differential thermal analysis (TGA/DTA) were carried out for the synthesized complexes. Diffractograms of all the synthesized complexes showed well‐resolved peaks, which revealed that pure and doped organic Eu³⁺ complexes were crystalline in nature. Of all the synthesized complexes, Eu_0.5 Tb_0.5(TTA)₃Phen showed maximum peak intensity, while the angle of maximum peak intensity for all complexes was almost the same with slightly different d‐values. A prominent sharp red emission line was observed at 611 nm when excited with light at 370 nm. It was observed that the intensity of red emissions increased for doped europium complexes Eu_(x)Y_(1‐x)(TTA)₃Phen and Eu_(x)Tb_(1‐x)(TTA)₃ Phen, when compared with Eu complexes. Emission intensity increased in the following order: Eu(TTA)₃Phen > Eu_0.5 Tb_0.5(TTA)₃Phen > Eu_0.4 Tb_0.6(TTA)₃Phen > Eu_0.5Y_0.5(TTA)₃Phen > Eu_0.4Y_0.6(TTA)₃Phen, proving their potential application in organic light‐emitting diodes (OLEDs). TGA showed that Eu complexes doped in Y³⁺ and Tb³⁺ have better thermal stability than pure Eu complex. DTA analysis showed that the melting temperature of Eu(TTA)₃ Phen was lower than doped Eu complexes. These measurements infer that all complexes were highly stable and could be used as emissive materials for the fabrication of OLEDs. Copyright © 2012 John Wiley & Sons, Ltd.     

Luminescence behavior of Li2Sr1‐3x/2EuxSiO4 red phosphors for LED applications

Red‐emitting Li₂Sr_1‐3x/2Eu_xSiO₄ 0≤x≤0.5) phosphors were synthesized at 900°C in air by a solid‐state reaction. The synthesized phosphors were characterized by X‐ray powder diffraction, photoluminescence (PL) excitation (PLE) and PL spectra. The results from the PLE spectra suggest that the strong 394 nm excitation peak associated with the ⁵L₆ state of Eu³⁺ ions is of significance for near ultraviolet pumped white light‐emitting diodes and solid‐state lighting. It is also noted that the position of the charge transfer state of Eu³⁺ ions shifts towards the higher energy side (blue shift) by increasing the content of Eu³⁺ ions. The predominant emissions of Eu³⁺ ions under 394 nm excitation are observed at 580, 593, 614, 656 and 708 nm, which are attributed to the ⁵D₀ → ⁷F_J (J = 0, 1, 2, 3 and 4), respectively. The PL results reveal that the optimal content of the red‐emitting Li₂Sr_1‐3x/2Eu_xSiO₄ phosphors is x = 0.475. Simulation of the white light excited by 394 nm near ultraviolet light has also been carried out for its potential white light‐emitting diode applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Novel Na+ doped Alq3 hybrid materials for organic light‐emitting diode (OLED) devices and flat panel displays

Pure and Na⁺‐doped Alq₃ complexes were synthesized by a simple precipitation method at room temperature, maintaining a stoichiometric ratio. These complexes were characterized by X‐ray diffraction, Fourier transform infrared (FTIR), UV/Vis absorption and photoluminescence (PL) spectra. The X‐ray diffractogram exhibits well‐resolved peaks, revealing the crystalline nature of the synthesized complexes, FTIR confirms the molecular structure and the completion of quinoline ring formation in the metal complex. UV/Vis absorption and PL spectra of sodium‐doped Alq₃ complexes exhibit high emission intensity in comparison with Alq₃ phosphor, proving that when doped in Alq₃, Na⁺ enhances PL emission intensity. The excitation spectra of the synthesized complexes lie in the range 242–457 nm when weak shoulders are also considered. Because the sharp excitation peak falls in the blue region of visible radiation, the complexes can be employed for blue chip excitation. The emission wavelength of all the synthesized complexes lies in the bluish green/green region ranging between 485 and 531 nm. The intensity of the emission wavelength was found to be elevated when Na⁺ is doped into Alq₃. Because both the excitation and emission wavelengths fall in the visible region of electromagnetic radiation, these phosphors can also be employed to improve the power conversion efficiency of photovoltaic cells by using the solar spectral conversion principle. Thus, the synthesized phosphors can be used as bluish green/green light‐emitting phosphors for organic light‐emitting diodes, flat panel displays, solid‐state lighting technology – a step towards the desire to reduce energy consumption and generate pollution free light. Copyright © 2014 John Wiley & Sons, Ltd.     

Intense green‐, red‐emitting Tb3+, Tb3+/Bi3+‐doped and Sm3+, Sm3+/La3+‐doped Ca2Al2SiO7 phosphors

This paper focuses on an optical study of a Tb³⁺/Bi³⁺‐doped and Sm³⁺/La³⁺‐ doped Ca₂Al₂SiO₇ phosphor synthesized using combustion methods. Here, Ca₂Al₂SiO₇:Sm³⁺ showed a red emission band under visible light excitation but, when it co‐doped with La³⁺ ions, the emission intensity was further enhanced. Ca₂Al₂SiO₇:Tb³⁺ shows the characteristic green emission band under near‐ultraviolet light excitation wavelengths, co‐doping with Bi³⁺ ions produced enhanced photoluminescence intensity with better colour tunable properties. The phosphor exhibited better phase purity and crystallinity, confirmed by X‐ray diffraction. Binding energies of Ca(2p), Al(2p), Si(2p), O(1s) were studied using X‐ray photoelectron spectroscopy. The reported phosphor may be a promising visible light excited red phosphor for light‐emitting diodes and energy conversion devices.     

Synthesis and characterization of pure and Li+ activated Alq3 complexes for green and blue organic light emitting diodes and display devices

Pure and Li⁺‐doped Alq₃ complexes were synthesized by simple precipitation method at room temperature, maintaining the stoichiometric ratio. These complexes were characterized by X‐ray diffraction, ultraviolet‐visible absorption and Fourier transform infrared and photoluminescence (PL) spectra. X‐ray diffraction analysis reveals the crystalline nature of the synthesized complexes, while Fourier transform infrared spectroscopy confirm the molecular structure, the completion of quinoline ring formation and presence of quinoline structure in the metal complex. Ultraviolet‐visible and PL spectra revealed that Li⁺ activated Alq₃ complexes exhibit the highest intensity in comparison to pure Alq₃ phosphor. Thus, Li⁺ enhances PL emission intensity when doped into Alq₃ phosphor. The excitation spectra lie in the range of 383–456 nm. All the synthesized complexes other than Liq give green emission, while Liq gives blue emission with enhanced intensity. Thus, he synthesized phosphors are the best suitable candidates for green‐ and blue‐emitting organic light emitting diode, PL liquid‐crystal display and solid‐state lighting applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis,crystal structure and fluorescence properties of terbium complexes with phenoxyacetic acid and 2,4,6‐tris‐(2‐pyridyl)‐s–triazine

Two complexes of Tb³⁺, Gd³⁺/Tb³⁺ and one heteronuclear crystal Gd³⁺/Tb³⁺ with phenoxyacetic acid (HPOA) and 2,4,6‐tris‐(2‐pyridyl)‐s–triazine (TPTZ) have been synthesized. Elemental analysis, rare earth coordination titration, inductively coupled plasma atomic emission spectrometry (ICP‐AES) and thermogravimetric analysis‐differential scanning calorimetry (TG‐DSC) analysis show that the two complexes are Tb₂(POA)₆(TPTZ)₂·6H₂O and TbGd(POA)₆(TPTZ)₂·6H₂O, respectively. The crystal structure of TbGd(POA)₆(TPTZ)₂·2CH₃OH was determined using single‐crystal X‐ray diffraction. The monocrystal belongs to the triclinic system with the P‐1 space group. In particular, each metal ion is coordinately bonded to three nitrogen atoms of one TPTZ and seven oxygen atoms of three phenoxyacetic ions. Furthermore, there exist two coordinate forms between C₆H₅OCH₂COO^– and the metal ions in the crystal. One is a chelating bidentate, the other is chelating and bridge coordinating. Fluorescence determination shows that the two complexes possess strong fluorescence emissions. Furthermore, the fluorescence intensity of the Gd³⁺/Tb³⁺ complex is much stronger than that of the undoped complex, which may result from a decrease in the concentration quench of Tb³⁺ ions, and intramolecular energy transfer from the ligands coordinated with Gd³⁺ ions to Tb³⁺ ions. Copyright © 2015 John Wiley & Sons, Ltd.     

Effect of different temperatures to remove reduction gas on the photoluminescence properties of Eu‐doped Li2(Ba1‐xSrx)SiO4 phosphors

In this study, Eu‐doped Li₂(Ba_1‐xSr_x)SiO₄ powders (x = 0, 0.2, 0.4, and 0.6) were synthesized at 850°C in a reduction atmosphere (5% H₂ + 95% N₂) for a duration of 1 h using a solid‐state reaction method. The reduction atmosphere was infused as the synthesis temperature reached 850°C, and was removed as the temperature dropped to 800–500°C. Li₂(Ba_1‐xSr_x)SiO₄ (or Li₂BaSiO₄), (Ba,Sr)₂SiO₄ (or BaSiO₄), and Li₄SiO₄ phases co‐existed in the synthesized Eu‐doped Li₂(Ba_1‐xSr_x)SiO₄ powders. A new finding was that the reduction atmosphere removing (RAR) temperature of the Li₂(Ba_1‐xSr_x)SiO₄ phosphors had a large effect on their photoluminescence excitation (PLE) and PL properties. Except for the 800°C‐RAR‐treated Li₂BaSiO₄ phosphor, PLE spectra of all other Li₂(Ba_1‐xSr_x)SiO₄ phosphors had one broad emission band with two emission peaks centred at ~242 and ~283 nm; these PL spectra had one broad emission band with one emission peak centred at 502–514 nm. We showed that the 800°C‐RAR‐treated Li₂BaSiO₄ phosphor emitted a red light and all other Li₂(Ba_1‐xSr_x)SiO₄ phosphors emitted a green light. Reasons for these results are discussed thoroughly.     

Structural and luminescence properties of Y2‐xGeMoO8:REx (RE = Eu,Tb) phosphors

Y_2‐xGeMoO₈:RE_x (RE = Eu, Tb) phosphors were synthesized using a facile sol–gel method. The morphology and structure of the phosphors were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X‐ray diffraction (XRD); while their luminescent properties were investigated by photoluminescence (PL) spectrometry. Our results reveal that all of these Y_2‐xGeMoO₈:RE_x (RE = Eu, Tb) phosphors adopted the tetragonal phase, belonging to Scheelite (CaWO₄) structure. The obtained YGeMoO₈:Eu phosphors exhibit a strong emission in the red light range which can be assigned to the ⁵D₀ → ⁷F₂ transition of Eu³⁺ when it is excited at 459 nm. Under 392 and 489 nm excitation, the YGeMoO₈:Tb phosphors present predominant green emission (⁵D₄ → ⁷F₅) at 540 nm. The highest emission of the phosphors can be achieved by adjusting the doping concentration to be 0.25 for Eu³⁺ and 0.15 for Tb³⁺, respectively. The promising luminescence properties of these materials indicate that they can be potentially applied to white‐light‐emitting diodes. Copyright © 2013 John Wiley & Sons, Ltd.     

Green‐light emission through energy transfer from Ce3+ to Tb3+ ions in the Li2SO4–Al2(SO4)3 system

An energy transfer process from Ce³⁺ to Tb³⁺ ions was successfully achieved in a Li₂SO₄–Al₂(SO₄)₃ mixed‐sulphate system. A wet‐chemical synthesis was employed to prepare the Li₂SO₄–Al₂(SO₄)₃ system by doping Ce³⁺ and Tb³⁺ ions individually as well as collectively. The phases were identified using X‐ray diffraction studies. The as‐prepared samples were characterized by FT‐IR and photoluminescence measurements. Green‐light emission was exhibited by Ce³⁺, Tb³⁺ co‐doped Li₂SO₄–Al₂(SO₄)₃ system, thus, indicating its potential as a material for display devices or in the lamp industry.     

Energy transfer between Ce3+ → Gd3+ or Tb3+ in KNaSO4 microphosphor

KNaSO₄ microphosphor doped with Ce,Gd and Ce,Tb and prepared by a wet chemical method was studied using X‐ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL) characterization. KNaSO₄ has a 5‐µm particle size detected by SEM. KNaSO₄:Ce³⁺,Tb³⁺ showed blue and green emission (at 494 nm, 557 nm, 590 nm) of Tb³⁺ due to ⁵D₄ → ⁷F_J (J = 4, 5, 6) transitions. KNaSO₄:Ce³⁺,Gd³⁺ showed luminescence in the ultraviolet (UV) light region at 314 nm for an excitation at 271 nm wavelength. It was observed that efficient energy transfer took place from Ce³⁺ → Gd³⁺ and Ce³⁺ → Tb³⁺ sublattices indicating that Ce³⁺ could effectively sensitize Gd³⁺ or Tb³⁺ (green emission). Ce³⁺ emission weakened and Gd³⁺ or Tb³⁺ enhanced the emission significantly in KNaSO₄. This paper discusses the development and understanding of photoluminescence and the effect of Tb³⁺ and Gd³⁺ on KNaSO₄:Ce³⁺. Copyright © 2015 John Wiley & Sons, Ltd.     

Improving green emission of Tb3+ ions in BaO‐B2O3‐P2O5 glasses by means of Al3+ ions

BaO‐B₂O₃‐P₂O₅ glasses doped with a fixed concentration of Tb³⁺ ions and varying concentrations of Al₂O₃ were synthesized, and the influence of the Al³⁺ ion concentration on the luminescence efficiency of the green emission of Tb³⁺ ions was investigated. The optical absorption, excitation, luminescence spectra and fluorescence decay curves of these glasses were recorded at ambient temperature. The emission spectra of terbium ions when excited at 393 nm exhibited two main groups of bands, corresponding to ⁵D₃ → ⁷F_j (blue region) and ⁵D₄ → 7F_j (green region). From these spectra, the radiative parameters, viz., spontaneous emission probability A, total emission probability A_T, radiative lifetime τ and fluorescent branching ratio β, of different transitions originating from the ⁵D₄ level of Tb³⁺ ions were evaluated based on the Judd‐Ofelt theory. A clear increase in the quantum efficiency and luminescence of the green emission of Tb³⁺ ions corresponding to ⁵D₄ → ⁷F₅ transition is observed with increases in the concentration of Al₂O₃ up to 3.0 mol%. The improvement in emission is attributed to the de‐clustering of terbium ions by Al³⁺ ions and also to the possible admixing of wave functions of opposite parities. Copyright © 2016 John Wiley & Sons, Ltd.     

Structure and photoluminescent properties of green‐emitting terbium‐doped GdV1−xPxO4 phosphor prepared by solution combustion method

Terbium‐doped gadolinium orthovanadate (GdVO₄:Tb³⁺), orthophosphate monohydrate (GdPO₄·H₂O:Tb³⁺) and orthovanadate–phosphate (GdV,PO₄:Tb³⁺) powder phosphors were synthesized using a solution combustion method. X‐Ray diffraction analysis confirmed the formation of crystalline GdVO₄, GdPO₄·H₂O and GdV,PO₄. Scanning electron microscopy images showed that the powder was composed of an agglomeration of particles of different shapes, ranging from spherical to oval to wire‐like structures. The chemical elements present were confirmed by energy dispersive spectroscopy, and the stretching mode frequencies were determined by Fourier transform infrared spectroscopy. UV–visible spectroscopy spectra showed a strong absorption band with a maximum at 200 nm assigned to the absorption of VO₄^3? and minor excitation bands assigned to f → f transitions of Tb³⁺. Four characteristic emission peaks were observed at 491, 546, 588 and 623 nm, and are attributed to ⁵D₄ → ⁷F_j (j = 6, 5, 4 and 3). The photoluminescent prominent green emission peak (⁵D₄ → ⁷F₅) was centred at 546 nm. The structure and possible mechanism of light emission from GdV_1?xP_xO₄:% Tb³⁺ are discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

Effect of thermal annealing on the structural and optical properties of tris‐(8‐hydroxyquinoline)aluminum(III) (Alq3) films

Tris‐(8‐hydroxyquionoline)aluminum (Alq₃) was synthesized and coated on to a glass substrate using the dip coating method. The structural and optical properties of the Alq₃ film after thermal annealing from 50°C to 300°C in 50° steps was studied. The films have been prepared with 2 to 16 layers (42–324 nm). The thickness and thermal annealing of Alq₃ films were optimized for maximum luminescence yield. The Fourier transform infrared spectrum confirms the formation of quinoline with absorption in the region 700 ? 500/cm. Partial sublimation and decomposition of quinoline ion was observed with the Alq₃ films annealed at 300°C. The X‐ray diffraction pattern of the Alq₃ film annealed at 50°C to 150°C reveals the amorphous nature of the films. The Alq₃ film annealed above 150°C were crystalline nature. Film annealed at 150°C exhibits a photoluminescence intensity maximum at 512 nm when excited at 390 nm. The Alq₃ thin film deposited with 10 layers (220 nm) at 150°C exhibited maximum luminescence yield. Copyright © 2014 John Wiley & Sons, Ltd.     

Luminescence study of Eu3+doped Li6Y(BO3)3 phosphor for solid‐state lighting

In this study, Li₆Y_1–xEu_x(BO₃)₃ phosphor was successfully synthesized using a modified solid‐state diffusion method. The Eu³⁺ ion concentration was varied at 0.05, 0.1, 0.2, 0.5 and 1 mol%. The phosphor was characterized for phase purity, morphology, luminescent properties and molecular transmission at room temperature. The XRD pattern suggests a result closely matching the standard JCPDS file (#80‐0843). The emission and excitation spectra were followed to discover the luminescence traits. The excitation spectra indicate that the current phosphor can be efficiently excited at 395 nm and at 466 nm (blue light) to give emission at 595 and 614 nm due to the ⁵D₀ → ⁷F_j transition of Eu³⁺ ions. Concentration quenching was observed at 0.5 mol% Eu³⁺ in the Li₆Y_1–xEu_x(BO₃)₃ host lattice. Strong red emission with CIE chromaticity coordinates of phosphor is x = 0.63 and y = 0.36 achieved with dominant red emission at 614 nm the ⁵D₀ → ⁷ F₂ electric dipole transition of Eu³⁺ ions. The novel Li₆Y_1–xEu_x(BO₃)₃ phosphor may be a suitable red‐emitting component for solid‐state lighting using double‐excited wavelengths, i.e. near‐UV at 395 nm and blue light at 466 nm. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and photoluminescence characteristics of (Y,Gd)BO3:RE (RE = Eu3+, Ce3+, Dy3+ and Tb3+) phosphors for blue chip and near‐UV white LEDs

A series of Eu³⁺‐, Ce³⁺‐, Dy³⁺‐ and Tb³⁺‐doped (Y,Gd)BO₃ phosphors was synthesized by a solid‐state diffusion method. X‐Ray diffraction confirmed their hexagonal structure and the scanning electron microscopy results showed crystalline particles. The excitation spectra revealed that (Y,Gd)BO₃ phosphors doped with Eu³⁺, Ce³⁺ , Dy³⁺ and Tb³⁺ are effectively excited with near UV‐light of 395 nm/blue light, 364, 351 and 314 nm, respectively. Photoluminescence spectra of Eu³⁺‐, Ce³⁺‐ and Tb³⁺/Dy³⁺‐doped phosphor showed intense emission of reddish orange, blue and white light, respectively. The phosphor Y_0.60Gd_0.38BO₃:Ce_0.02 showed CIE 1931 color coordinates of (0.158, 0.031) and better color purity compared with commercially available blue BAM:Eu²⁺ phosphor. The phosphor (Y,Gd)BO₃ doped with Eu³⁺, Dy³⁺ and Tb³⁺ showed CIE 1931 color coordinates of (0.667, 0.332), (0.251, 0.299) and (0.333, 0.391) respectively. Significant photoluminescence characteristics of the prepared phosphors indicate that they might serve as potential candidates for blue chip and near‐UV white light‐emitting diode applications. Copyright © 2015 John Wiley & Sons, Ltd.     

Eu3+‐activated Y2MoO6: a narrow band red‐emitting phosphor with strong near‐UV absorption

Near‐UV excited narrow line red‐emitting phosphors, Eu³⁺‐activated Y₂MoO₆ systems, were synthesized using a simple molten salt reaction. The structure and photoluminescence characteristics were investigated using X‐ray powder diffraction, UV–Vis absorption and fluorescent spectrophotometry. The excitation spectra show strong broad‐band absorptions in the near‐UV to blue light regions which match the radiation of near‐UV light‐emitting diode chips well. Under excitation of either near‐UV or blue light, intense red emission with a main peak of 611 nm is observed, ascribed to the ⁵D₀–⁷F₂ transition of Eu³⁺ ions; the optimal doping concentration is 20 mol%. The chromaticity coordinates (x = 0.65, y = 0.34) of the as‐obtained phosphor are very close to the National Television Standard Committee standard values (x = 0.67, y = 0.33). All these characteristics suggest that this material is a promising red‐emitting phosphor candidate for white‐LEDs based on near‐UV LED chips. Copyright © 2012 John Wiley & Sons, Ltd.     

Thermoluminescence and photoluminescence studies on γ‐ray‐irradiated Ce3+,Tb3+‐doped potassium chloride single crystals

Single crystals of KCl doped with Ce³⁺,Tb³⁺ were grown using the Bridgeman–Stockbarger technique. Thermoluminescence (TL), optical absorption, photoluminescence (PL), photo‐stimulated luminescence (PSL), and thermal‐stimulated luminescence (TSL) properties were studied after γ‐ray irradiation at room temperature. The glow curve of the γ‐ray‐irradiated crystal exhibits three peaks at 420, 470 and 525 K. F‐Light bleaching (560 nm) leads to a drastic change in the TL glow curve. The optical absorption measurements indicate that F‐ and V‐centres are formed in the crystal during γ‐ray irradiation. It was attempted to incorporate a broad band of cerium activator into the narrow band of terbium in the KCl host without a reduction in the emission intensity. Cerium co‐doped KCl:Tb crystals showed broad band emission due to the d–f transition of cerium and a reduction in the intensity of the emission peak due to ⁵D₃–⁷F_j (j = 3, 4) transition of terbium, when excited at 330 nm. These results support that energy transfer occurs from cerium to terbium in the KCl host. Co‐doping Ce³⁺ ions greatly intensified the excitation peak at 339 nm for the emission at 400 nm of Tb³⁺. The emission due to Tb³⁺ ions was confirmed by PSL and TSL spectra. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescence and energy‐transfer properties of color‐tunable Ca2Mg0.25Al1.5Si1.25O7:Ce3+/Eu2+/Tb3+ phosphors for ultraviolet light‐emitting diodes

A series of Ca₂Mg_0.25Al_1.5Si_1.25O₇:Ce³⁺/Eu²⁺/Tb³⁺ phosphors was been prepared via a conventional high temperature solid‐state reaction and their luminescence properties were studied. The emission spectra of Ca₂Mg_0.25Al_1.5Si_1.25O₇:Ce³⁺,Eu²⁺ and Ca₂Mg_0.25Al_1.5Si_1.25O₇:Ce³⁺,Tb³⁺ phosphors show not only a band due to Ce³⁺ ions (409 nm) but also as a band due to Eu²⁺ (520 nm) and Tb³⁺ (542 nm) ions. More importantly, the effective energy transfer from Ce³⁺ to Eu²⁺ and Tb³⁺ ions was confirmed and investigated by emission/excitation spectra and luminescent decay behaviors. Furthermore, the energy level scheme and energy transfer mechanism were investigated and were demonstrated to be of resonant type via dipole–dipole (Ce³⁺ to Eu²⁺) and dipole–quadrupole (Ce³⁺ to Tb³⁺) reactions, respectively. Under excitation at 350 nm, the emitting color could be changed from blue to green by adjusting the relative doping concentration of Ce³⁺ and Eu²⁺ ions as well as Ce³⁺ and Tb³⁺ ions. The above results indicate that Ca₂Mg_0.25Al_1.5Si_1.25O₇:Ce³⁺,Eu²⁺/Tb³⁺ are promising single‐phase blue‐to‐green phosphors for application in phosphor conversion white‐light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and photoluminescence properties of Sm3+‐doped YAl3(BO3)4 phosphor

A near ultraviolet excitable phosphor based on Sm³⁺‐doped YAl₃(BO₃)₄ has been synthesized by modified solid‐state reaction at 1000°C. The phase purity and photoluminescence (PL) behavior of the phosphor are studied in detail using the powder X‐ray diffraction technique and PL measurements. X‐ray diffraction reveals that the phase purity of YAl₃(BO₃)₄ critically depends upon the boric acid concentration. The phosphor has strong excitation at 406 nm in the near ultraviolet region (350–420 nm) and its emission peaks were monitored at 564, 599 and 643 nm. Further, detailed PL analysis demonstrates that the substitution of Sm³⁺ ions at sites of Y³⁺ and Al³⁺ ions enhances the PL efficiency of the phosphor appreciably. First, the PL efficiency of YAl₃(BO₃)₄:Sm³⁺ was compared with commercial (Y,Gd)BO₃:Eu³⁺ red phosphor. The Fourier transform infrared study provides essential information regarding the change in metal–oxygen bond vibrations of the phosphor. The morphology of the phosphor was investigated through scanning electron microscopy, which reveals that the phosphor possessed distorted spherical and rectangular shapes with average grain sizes in the range 0.5–1 µm. Copyright © 2013 John Wiley & Sons, Ltd.