Determination of bergenin based on the electrochemiluminescence quenching of tris(2,2′‐bipyridine)‐ruthenium(II)

Quenching effects of bergenin, based on the electrochemiluminescence (ECL) of the tris(2,2′‐bipyridyl)‐ruthenium(II) (Ru(bpy)₃²⁺)/tri‐n‐propylamine (TPrA) system in aqueous solution, is been described. The quenching behavior can be observed with a 100‐fold excess of bergenin over Ru(bpy)₃²⁺. In the presence of 0.1 m TPrA, the Stern–Volmer constant (K_SV) of the ECL quenching is as high as 1.16 × 10⁴ M^?1 for bergenin. The logarithmic plot of the inhibited ECL versus logarithmic plot of the concentration of bergenin was linear over the range 3.0 × 10^?6–1.0 × 10^?4 mol/L. The corresponding limit of detection was 6.0 × 10^?7 mol/L for bergenin (S/N = 3). In the mechanism of quenching it is believed that the competition of the active free radicals between Ru(bpy)₃²⁺/TPrA and bergenin was the key factor for the ECL inhibition of the system. Photoluminescence, cyclic voltammetry, coupled with bulk electrolysis, supports the supposition mechanism of the Ru(bpy)₃²⁺/TPrA–bergenin system. Copyright © 2015 John Wiley & Sons, Ltd.     

Determination of ketotifen fumarate by capillary electrophoresis with tris(2,2′‐bipyridyl) ruthenium(II) electrochemiluminescence detection

On the basis of an europium (III)‐doped Prussian blue analog film modifying platinum electrode as the working electrode, a Ru(bpy)₃²⁺‐based electrochemiluminescence (ECL) assay coupled with capillary electrophoresis has been first established for the determination of ketotifen fumarate (KTF). Analytes were injected onto a separation capillary of 50 cm length (50 μm i.d., 360 μm o.d.) by electrokinetic injection for 10 s at 10 kV. Parameters related to the separation and detection were discussed and optimized. It was proved that 15 mm phosphate buffer at pH 8.0 could achieve the most favorable resolution, and the highest sensitivity of detection was obtained using the detection potential at 1.25 V and 5 mm Ru(bpy)₃²⁺ in 100 mm phosphate buffer at pH 8.0 in the detection reservoir. Under the optimized conditions, the ECL intensity was in proportion to KTF concentration over the range from 3.0 × 10^?8 to 5.0 × 10^?6 g mL^?1 with a detection limit of 2.1 × 10^?8 g mL^?1 (3σ). The relative standard deviations of the ECL intensity and the migration time were 0.95 and 0.26%, respectively. The developed method was successfully applied to determine KTF contents in pharmaceuticals and human urine with recoveries between 99.5 and 107.0%. Copyright © 2010 John Wiley & Sons, Ltd.     

Flow‐injection analysis for meloxicam based on tris(2,2′‐bipyridine) ruthenium(II)–Ce(IV) chemiluminescent system

It was found that meloxicam could enhance the chemiluminescence (CL) of the tris(2,2'‐bipyridine) ruthenium(II)–Ce(IV) system in the medium of sulfate acid. Based on this phenomenon a new flow‐injection system with chemiluminescent detection has been proposed for determination of meloxicam. Under optimum conditions, meloxicam had a good linear relationship with the CL intensity in the concentration range of 6.0  10^?4 to 1.0 µg/mL and the detection limit was 3.7 × 10^?4 µg/mL. The proposed method was applied to detect meloxicam in tablets and a satisfactory recovery was obtained. The possible mechanism for this CL system is also discussed in this paper. Copyright © 2009 John Wiley & Sons, Ltd.     

Electrochemiluminescence of tris(2,2′‐bipyridyl)ruthenium and its applications in bioanalysis: a review

Electrochemiluminescence (ECL) of tris(2,2’‐bipyridyl)ruthenium(II) [Ru(bpy)₃²⁺] is an active research area and includes the synthesis of ECL‐active materials, mechanistic studies and broad applications. Extensive research has been focused on this area, due to its scientific and practical importance. In this mini‐review we focus on the bio‐related applications of ECL. After a brief introduction to Ru(bpy)₃²⁺ ECL and its mechanisms, its application in constructing an effective bioassay is discussed in detail. Three types of ECL assay are covered: DNA, immunoassay and functional nucleic acid sensors. Finally, future directions for these assays are discussed. Copyright © 2011 John Wiley & Sons, Ltd.     

Quantitative electrochemiluminescence detection of proteins: Avidin-based sensor and tris(2,2'-bipyridine) ruthenium(II) label

Quantitative electrochemiluminescence (ECL) detection of a model protein, bovine serum albumin (BSA) was achieved via biotin–avidin interaction using an avidin-based sensor and a well-developed ECL system of tris(2,2′-bipyridine) ruthenium(II) derivative as label and tri-n-propylamine (TPA) as coreactant. To detect the protein, avidin was linked to the glassy carbon electrode through passive adsorptions and covalent interaction with carboxylate-terminated carbon nanotubes that was used as binder to immobilize avidin onto the electrode. Then, biotinylated BSA tagged with tris(2,2′-bipyridine) ruthenium(II) label was attached to the prepared avidin surface. After binding of BSA labeled with tris(2,2′-bipyridine) ruthenium(II) derivative to the surface-immobilized avidin through biotin, ECL response was generated when the self-assembled modified electrode was immersed in a TPA-containing electrolyte solution. Such double protein labeling protocol with a biotin label for biorecognition and ruthenium label for ECL detection facilitated the detection of protein compared to the classical double antibody sandwich format. The ECL intensity was linearly proportional to the feed concentration of BSA over two orders of magnitude in the range of 15 nM to 7.5 μM. The detection limit was estimated to be 1.5 nM. Further application to the lysozyme analysis was carried out to validate the present approach for an effective and favorable protocol for the quantitative detection of proteins. The dynamic range of lysozyme was from 0.001 g L⁻¹ to 0.1 g L⁻¹ and the detection limit was 0.1 mg L⁻¹. Electrochemical impedance and cyclic voltammetric measurements along with some necessary control experiments were conducted to characterize the successful formation of self-assembled modified electrodes and to grant the whole detection process.     

Self‐quenching in the electrochemiluminescence of Ru(bpy)32+ using ascorbic acid as co‐reactant

In this study, electrochemiluminescence (ECL) of Ru(bpy)₃²⁺ (bpy = 2,2′‐bipyridyl) using ascorbic acid (H₂A) as co‐reactant was investigated in an aqueous solution. When H₂A was co‐existent in a Ru(bpy)₃²⁺‐containing buffer solution, ECL peaks were observed at a potential corresponding to the oxidation of Ru(bpy)₃²⁺, and the intensity was proportional to H₂A concentration at lower concentration levels. The formation of the excited state *Ru(bpy)₃²⁺ was confirmed to result from the co‐reaction between Ru(bpy)₃³⁺and the intermediate of ascorbate anion radical (A⁻•), which showed the maximum ECL at pH = 8.8. It is our first finding that the ECL intensity would be quenched significantly when the concentration of H₂A was relatively higher, or upon ultrasonic irradiation. In most instances, quenching is observed with four‐fold excess of H₂A over Ru(bpy)₃²⁺. The diffusional self‐quenching scheme as well as the possible reaction pathways involved in the Ru(bpy)₃²⁺–H₂A ECL system are discussed in this study. Copyright © 2008 John Wiley & Sons, Ltd.     

Highly sensitive electrochemiluminescence determination of etamsylate using a low‐cost electrochemical flow‐through cell based on a tris(2, 2'‐bipyridyl)ruthenium(II)–Nafion‐modified carbon paste electrode

A simple and sensitive electrochemiluminescence (ECL) method for the determination of etamsylate has been developed by coupling an electrochemical flow‐through cell with a tris(2,2'‐bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺)–Nafion‐modified carbon electrode. It is based on the oxidized Ru(bpy)₃²⁺ on the electrode surface reacting with etamsylate and producing an excellent ECL signal. Under optimized experimental conditions, the proposed method allows the measurement of etamsylate over the range of 8–1000 ng/mL with a correlation coefficient of r = 0.9997 (n = 7) and a limit of detection of 1.57 ng/mL (3σ), the relative standard deviation (RSD) for 1000 ng/mL etamsylate (n = 7) is 0.96%. The immobilized Ru(bpy)₃²⁺ carbon paste electrode shows good electrochemical and photochemical stability. This method is rapid, simple, sensitive and has good reproducibility. It has been successfully applied to the determination of the studied etamsylate in pharmaceutical preparations with satisfactory results. The possible ECL reaction mechanism has also been discussed. Copyright © 2013 John Wiley & Sons, Ltd.     

Perturbation of the tris(2,2′‐bipyridine) ruthenium(II)‐catalyzed Belousov–Zhabotinsky oscillating chemiluminescence reaction by l‐cysteine and its application

Perturbation of the tris(2,2′‐bipyridine)ruthenium(II) [Ru(bpy)₃²⁺]‐catalyzed Belousov–Zhabotinsky (BZ) oscillating chemiluminescence (CL) reaction induced by l ‐cysteine was observed in the closed system. It was found that the CL intensity was decreased in the presence of l ‐cysteine. Meanwhile, oscillation period and oscillating induction period were prolonged. The sufficient reproducible induction period was used as parameter for the analytical application of oscillating CL reaction. Under the optimum conditions, the changes in the oscillating CL induction period were linearly proportional to the concentration of l ‐cysteine in the range from 8.0 × 10^?7 to 5.0 × 10^?5 mol L^?1 (r = 0.997) with a detection limit of 4.3 × 10^?7 mol L^?1. The possible mechanism of l ‐cysteine perturbation on the oscillating CL reaction was also discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

Long‐lived electrochemiluminescence of ruthenium (II) complexes/tri‐n‐propylamine in aqueous solutions

Although the clinical use of immunoassays based on the oxidative‐reduction electrochemiluminescence (ECL) of tris(2,2′‐bipyridine)ruthenium (II)/tri‐n‐propylamine has been a great success, elucidation of the ECL generation mechanism still remains unsatisfactory. We report here our experimental observations of long‐lived luminescence that remains detectable for several seconds after termination of electrochemical heterogeneous oxidation. Long‐lived luminescence was observed in both a surfactant‐free buffer and a surfactant‐containing broadly used commercial buffer under different conditions. The slow decay of emission seems to have been unnoticed in previous ECL mechanistic studies. Within the frame of the reaction schemes so far proposed, its origin is inconclusively ascribed to the reductive‐oxidation process of ruthenium (II) complex, that is Ru(bpy)₃²⁺ → Ru(bpy)₃¹⁺ → Ru(bpy)₃²⁺* → Ru(bpy)₃²⁺ with the involvement of the tri‐n‐propylamine‐derived radical cation. It is anticipated that long‐lived ECL will suggest a research approach to separate some homogeneous reactions from the complicated reaction system and therefore help to resolve the mechanistic mystery.     

In-situ produced ascorbic acid as coreactant for an ultrasensitive solid-state tris(2,2'-bipyridyl) ruthenium(II) electrochemiluminescence aptasensor

Herein, an ultrasensitive solid-state tris(2,2'-bipyridyl) ruthenium(II) (Ru(bpy)(3)(2+)) electrochemiluminescence (ECL) aptasensor using in-situ produced ascorbic acid as coreactant was successfully constructed for detection of thrombin. Firstly, the composite of Ru(bpy)(3)(2+) and platinum nanoparticles (Ru-PtNPs) were immobilized onto Nafion coated glass carbon electrode, followed by successive adsorption of streptavidin-alkaine phosphatase conjugate (SA-ALP) and biotinylated anti-thrombin aptamer to successfully construct an ECL aptasensor for thrombin determination. In our design, Pt nanoparticles in Ru(bpy)(3)(2+)-Nafion film successfully inhibited the migration of Ru(bpy)(3)(2+) into the electrochemically hydrophobic region of Nafion and facilitated the electron transfer between Ru(bpy)(3)(2+) and electrode surface. Furthermore, ALP on the electrode surface could catalyze hydrolysis of ascorbic acid 2-phosphate to in-situ produce ascorbic acid, which co-reacted with Ru(bpy)(3)(2+) to obtain quite fast, stable and greatly amplified ECL signal. The experimental results indicated that the aptasensor exhibited good response for thrombin with excellent sensitivity, selectivity and stability. A linear range of 1 × 10(-15)-1 × 10(-8) M with an ultralow detection limit of 0.33 fM (S/N=3) was obtained. Thus, this procedure has great promise for detection of thrombin present at ultra-trace levels during early stage of diseases.     

Preliminary electrochemiluminescence study of allantoin in the presence of tris(2,2'-bipyridine) ruthenium (II).

Electrochemiluminescence (ECL) based on allantoin and tris(2,2'-bipyridine)ruthenium (II) [Ru(bpy)3 (2+)] was studied in aqueous alkaline buffer solution (pH 11.0). In a flowing system, the eluted allantoin was mixed with 1.0 mmol/L Ru(bpy)3 (2+). When the solution passed through a thin layer flow electrolytic cell equipped with a glassy carbon disc electrode (22.1 mm2), both hydroxyl groups of allantoin and Ru(bpy)3 (2+) were oxidized at the potential of +1.50 V (vs. Ag/AgCl). The luminescence with lambdamax 610 nm caused by the reaction of electrolytically formed Ru(bpy)3 (2+) with alkoxide radical to generate the excited state of Ru(bpy)3 (2+*). A possible ECL process of allantoin in Ru(bpy)3 (2+) alkaline solution has been discussed. In addition, the factors affecting the ECL response of allantoin are also investigated.     

Electrochemiluminescence of an electrocatalytic action of etimicin on Tris(2,2′‐bipyridyl)ruthenium(II) immobilized in Nafion modified carbon paste electrode

A sensitive electrochemiluminescence (ECL) detection of etimicin at Tris(2,2′‐bipyridyl)ruthenium(II) [Ru(bpy)₃²⁺]–Nafion modified carbon paste electrodes was developed. The immobilized Ru(bpy)₃²⁺ shows good electrochemical and photochemical activities. Electrochemical and electrochemiluminescence characterizations of the modified carbon electrodes were made by means of cyclic voltammetry and electrochemical impendence spectroscopy. The modified electrode showed an electrocatalytic response to the oxidation of etimicin, producing a sensitized ECL signal. The ECL sensor showed a linear response to etimicin in the range of 8.0–160.0 ng mL^?1 with a detection limit of 6.7 ng mL^?1. This method for etimicin determination possessed good sensitivity and reproducibility with a coefficient of variation of 5.1% (n = 7) at 100 ng mL^?1. The ECL sensor showed good selectivity and long‐term stability. Its surface could be renewed quickly and reproducibly by a simple polish step. Copyright © 2009 John Wiley & Sons, Ltd.     

Sensitive determination of bromhexine hydrochloride based on its quenching effect on luminol/H2O2 electrochemiluminescence system

In this paper, the electrochemiluminescence (ECL) behavior of luminol/H₂O₂ system in the presence of bromhexine hydrochloride (BrH) was investigated. It was found that the ECL intensity of luminol/H₂O₂ system on a platinum electrode could be intensely quenched by BrH owing to the scavenging superoxide radical ability of BrH, and therefore the sensitive determination of BrH was possible. Under optimal conditions, the quenched ECL intensity was linear to the concentration of BrH in a wide range of 0.08 to 500 μM, with a detection limit of 0.02 μM (signal‐to‐noise ratio (S/N) = 3). This ECL method possessed the merits of rapid, simple and sensitive, and was successfully applied to the BrH quantification in pharmaceutical preparations with satisfactory recoveries of 91.0 ± 4.0 to 106.5 ± 3.4%. The possible route of the quenched ECL of luminol/H₂O₂ in the presence of BrH was also discussed.     

Diastereomeric resolution of p‐chloromandelic acid with (R)‐phenylethylamine

The optical resolution of p‐chloromandelic acid using (R)‐α‐phenylethylamine as resolving agent was presented. The effect of solvents, molar ratio of racemate to the resolving agent, filtration temperature as well as the amount of solvent on resolution was investigated by orthogonal experimentation. The binary melting point phase diagram and crystal structure analysis of diastereomeric salts rationalized the success of the resolution. Chirality, 2010. © 2009 Wiley‐Liss, Inc.     

Photoproducts from the photolysis of tris(bipyridine)ruthenium(II) chloride in dimethylformamide

Six photoproducts were observed in the photolysis of [Ru(bpy)₃]²⁺ in N,N-dimethylformamide (DMF) in the presence of chloride ions. The primary products were cis-[Ru(bpy)₂Cl₂] and cis-[Ru(bpy)₂-(DMF)Cl]⁺. The remaining ruthenium products, which were thermally unstable to varying degrees, were cis-[Ru(bpy)₂Cl₂]⁺, [Ru(bpy)₃]⁺, and a binuclear species we have tentatively identified as [Ru(bpy)₂Cl]₂ⁿ⁺ (n = 3 or 4).     

Synthesis, photoluminescence and electrochemiluminescence of ruthenium(II) polypyridyl complexes based on bipyridine derivatives with carbazole moieties

Six complexes (1-6) with the type of [Ru(bpy)₂L]X₂ (1-3: L = L1-L3, X = Cl⁻; 4-6: L = L1-L3, X = PF₆⁻) were synthesized based on 2,2′-bipyridine and three 2,2′-bipyridine derivatives L1, L2 and L3 (L1 = 5,5′-dibromo-2,2′-bipyridine, L2 = 5-bromo-5′-carbazolyl-2,2′-bipyridine, L3 = 5,5′-dicarbazolyl-2,2′-bipyridine). The complexes 1-6 were characterized by ¹H NMR, MS(ESI) and IR spectra, along with the X-ray crystal structure analysis for 1, 5 and 6. Their photophysical properties and electrochemiluminescence (ECL) properties were investigated in detail. In the UV-Vis absorption spectra, all complexes 1-6 show strong intraligand (π → π^∗) transitions and metal-ligand charge transfer (MLCT, dπ (Ru) → π^∗) bands. Upon the excitation wavelengths at ∼508 nm, all complexes 1-6 exhibit typical MLCT emission of ruthenium(II) polypyridyl complexes. The introduction of carbazole moieties improves the MLCT absorption and emission intensity. The ruthenium(II) complexes 1-6 exhibit good electrochemiluminescence (ECL) properties in [Ru(bpy)₂L]²⁺/tri-n-propylamine (TPrA) acetonitrile solution and the complexes with PF₆⁻ showed higher ECL emission intensity than that of the complexes with Cl⁻ based on the same ligands.     

Flow‐injection chemiluminescent determination of estrogen benzoate using the tris(1,10‐phenanthroline) ruthenium(II)–permanganate system

Chemiluminescence (CL) detection for the determination of estrogen benzoate, using the reaction of tris(1,10–phenanthroline)ruthenium(II)–Na₂SO₃–permanganate, is described. This method is based on the CL reaction of estrogen benzoate (EB) with acidic potassium permanganate and tris(1,10–phenanthroline)ruthenium(II). The CL intensity is greatly enhanced when Na₂SO₃ is added. After optimization of the different experimental parameters, a calibration graph for estrogen benzoate is linear in the range 0.05–10 µg/mL. The 3 s limit of detection is 0.024 µg/mL and the relative standard deviation was 1.3% for 1.0 µg/mL estrogen benzoate (n = 11). This proposed method was successfully applied to commercial injection samples and emulsion cosmetics. The mechanism of CL reaction was also studied. Copyright © 2011 John Wiley & Sons, Ltd.     

Separation and determination of bupivacaine in plasma by capillary electrophoresis with tris(2,2'-bipyridyl)ruthenium(II) electrochemiluminescence detection.

A new, rapid, selective and sensitive method is described for determination of bupivacaine by capillary electrophoresis coupled with tris(2,2'-bipyridyl)ruthenium(II) [Ru(bpy)(3)2+] electrochemiluminescence detection. The influence of parameters such as detection potential, Ru(bpy)(3)2+ concentration, buffer concentration and pH, injection time and separation voltage on separation efficiency and ECL peak intensity was systematically investigated. Under optimized conditions, the calibration curve was linear in the range 0.02-10 microg/mL. The RSD was 4.0% (n = 6). The detection limit was 3 ng/mL. The recoveries obtained were about 90%. This method was tested in the analysis of plasma samples taken from a rat after it had received bupivacaine injections.