Synthesis of poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)/chitosan/silver nanocomposite material with enhanced antimicrobial activity

This work aims to shed light in the fabrication of poly(3‐hydroxybutyrate‐co‐44%‐4‐hydroxybutyrate)[P(3HB‐co‐44%4HB)]/chitosan‐based silver nanocomposite material using different contents of silver nanoparticle (SNP); 1–9 wt%. Two approaches were applied in the fabrication; namely solvent casting and chemical crosslinking via glutaraldehyde (GA). A detailed characterization was conducted in order to yield information regarding the nanocomposite material. X‐ray diffraction analysis exhibited the nature of the three components that exist in the nanocomposite films: P(3HB‐co‐4HB), chitosan, and SNP. In term of mechanical properties, tensile strength, and elongation at break were significantly improved up to 125% and 22%, respectively with the impregnation of the SNP. The melting temperature of the nanocomposite materials was increased whereas their thermal stability was slightly changed. Scanning electron microscopy images revealed that incorporation of 9 wt% of SNP caused agglomeration but the surface roughness of the material was significantly improved with the loading. Staphylococcus aureus and Escherichia coli were completely inhibited by the nanocomposite films with 7 and 9 wt% of SNP, respectively. On the other hand, degradation of the nanocomposite materials outweighed the degradation of the pure copolymer. These bioactive and biodegradable materials stand a good chance to serve the vast need of biomedical applications namely management and care of wound as wound dressing. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:1469–1479, 2014     

Preparation and characterization of novel chitosan/gelatin membranes using chitosan hydrogel

Chitin and chitosan are novel biomaterials. The novel chitosan/gelatin membranes were prepared using the suspension of chitosan hydrogel mixed with gelatin. The prepared chitosan/gelatin membranes were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), mechanical, swelling, and thermal studies. The morphology of these chitosan/gelatin membranes was found to be very smooth and homogeneous. The XRD studies showed that the chitosan/gelatin membranes have good compatibility and interaction between the chitosan and gelatin. The stress and elongation of chitosan/gelatin membranes on wet condition showed excellent when the mixture ratio of gelatin was 0.50. The prepared chitosan/gelatin membranes showed good swelling, mechanical and thermal properties. Cell adhesion studies were also carried out using human MG-63 osteoblast-like cells. The cells incubated with chitosan/gelatin membranes for 24 h were capable of forming cell adhesion. Thus the prepared chitosan/gelatin membranes are bioactive and are suitable for cell adhesion suggesting that these membranes can be used for tissue-engineering applications. Therefore, these novel chitosan/gelatin membranes are useful for biomedical applications.     

Study of the near-neutral pH-sensitivity of chitosan/gelatin hydrogels by turbidimetry and microcantilever deflection

The fundamental properties and pH-sensitivity of chitosan/gelating hydrogels were investigated using spectroscopic and microelectro mechanical (MEMS) measurement approaches. Turbidimetric titration revealed that there were electrostatic attractive interactions between tripolyphosphate (TPP), chitosan, and gelatin in the acidic pH range, depending on their degree of ionization. The pH-sensitive swelling behavior of the hydrogels was investigated by monitoring the deflection of hydrogel-coated microcantilevers, which exhibited a sensitive and repeatable response to solution pH. The deflection of the microcantilever increased as the pH decreased, and the response speed of the system exhibited a nearly linear relationship with pH. The effects of the pH and concentration of TPP solution, as well as the ratio of chitosan to gelatin in gel precursor solutions, on the pH sensitivity of the hydrogels were also investigated. It was found that the swelling of the hydrogel is mainly a result of chain relaxation of chitosan-TPP complexes caused by protonation of free amino groups in chitosan, which depends on the crosslinking density set during the formation of the network. An increase in initial crosslink density induced a decrease in swelling and pH sensitivity. It can be concluded from this study that pH-sensitive chitosan gel properties can be tuned by preparatory conditions and inclusion of gelatin. Furthermore, microcantilevers can be used as a platform for gaining increased understanding of environmentally sensitive polymers.     

Hydrogels of dihydroxypropyl chitosan crosslinked with irradiation at paste-like condition

In present study, a series of environmentally friendly hydrogel films were prepared from dihydroxypropyl chitosan (DHP-chitosan) using irradiation technique without any bifunctional crosslinking compounds. DHP-chitosan irradiated at high concentrated solution state (more than 10%, paste-like state) was found to introduce crosslinking structure. Crosslinking behavior, mechanical property, morphology, and swelling behavior of the hydrogel films were studied. It has been found that a concentration of 40% solution is the most effective for crosslinking. The hydrogel films of DHP-chitosan exhibited controllable mechanical property and typically pH-sensitive character in their swelling behavior. A preliminary biodegradation study confirmed that DHP-chitosan hydrogels also undergo biodegradation by enzymatic degradation test.     

Swelling and mechanical properties of biopolymer hydrogels containing chitosan and bovine serum albumin

Experimental and theoretical investigations of the swelling and mechanical properties of hydrogels formed from chitosan, bovine serum albumin (BSA), and chitosan/BSA mixtures cross-linked with genipin were performed. The properties of cross-linked chitosan hydrogels were explained in terms of its polyelectrolyte behavior, which led to a gradual increase in swelling ratio below the pK value, but whereby its swelling ability was eliminated by the presence of salt that screened the charges. Comparison of theoretical and experimental calculations of the swelling ratio, however, indicated that complications arising from wastage of cross-links, and formation of polymerized genipin cross-links must be considered before quantitative prediction can be achieved. Cross-linked BSA hydrogels swelled even in the presence of salt, and a marked increase in swelling was observed below pH = 3 that was explained as the result of an acid induced denaturation of the protein that led to unfolding of the molecule. Swollen BSA hydrogels were mechanically weak, however. Composite gels made from a cross-linked mixture of chitosan and BSA exhibited the swelling behavior of BSA combined with the mechanical properties of chitosan and were therefore considered most suitable for use in a gastric environment.     

Design and development of low cost polyurethane biopolymer based on castor oil and glycerol for biomedical applications

In the current study, we present the synthesis of novel low cost bio‐polyurethane compositions with variable mechanical properties based on castor oil and glycerol for biomedical applications. A detailed investigation of the physicochemical properties of the polymer was carried out by using mechanical testing, ATR‐FTIR, and X‐ray photoelectron spectroscopy (XPS). Polymers were also tested in short term in‐vitro cell culture with human mesenchymal stem cells to evaluate their biocompatibility for potential applications as biomaterial. FTIR analysis confirmed the synthesis of castor oil and glycerol based PU polymers. FTIR also showed that the addition of glycerol as co‐polyol increases crosslinking within the polymer backbone hence enhancing the bulk mechanical properties of the polymer. XPS data showed that glycerol incorporation leads to an enrichment of oxidized organic species on the surface of the polymers. Preliminary investigation into in vitro biocompatibility showed that serum protein adsorption can be controlled by varying the glycerol content with polymer backbone. An alamar blue assay looking at the metabolic activity of the cells indicated that castor oil based PU and its variants containing glycerol are non‐toxic to the cells. This study opens an avenue for using low cost bio‐polyurethane based on castor oil and glycerol for biomedical applications.     

Growth of human mesenchymal stem cells (MSCs) on films of enzymatically modified chitosan

Mesenchymal stem cells (MSCs) are known to be an attractive cell source for tissue engineering and regenerative medicine. One of the main limiting steps for clinical use or biotechnological purposes is the expansion step. The research of compatible biomaterials for MSCs expansion is recently regarded as an attractive topic. The aim of this study was to create new functional biomaterial for MSCs expansion by evaluating the impact of chitosan derivative films modified by enzymatic approach. First, chitosan particles were enzymatically modified with ferulic acid (FA) or ethyl ferulate (EF) under an eco‐friendly procedure. Then, films of chitosan and its modified derivatives were prepared and evaluated by physicochemical and biological properties. Results showed that the enzymatic grafting of FA or EF onto chitosan significantly increased hydrophobic and antioxidant properties of chitosan films. The MSCs cell viability on chitosan derivative films also increased depending on the film thickness and the quantity of grafted phenols. Furthermore, the cytotoxicity test showed the absence of toxic effect of chitosan derivative films towards MSCs cells. Cell morphology showed a well attached and spread phenotype of MSCs cells on chitosan derivative films. On the other hand, due to the higher phenol content of FA‐chitosan films, their hydrophobic, antioxidant properties and cell adhesion were improved in comparison with those of EF‐chitosan films. Finally, this enzymatic process can be considered as a promising process to favor MSCs cell growth as well as to create useful biomaterials for biomedical applications especially for tissue engineering. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:491–500, 2016     

Effect of crosslinking in chitosan/aloe vera-based membranes for biomedical applications

The positive interaction between polysaccharides with active phytochemicals found in medicinal plants may represent a strategy to create active wound dressing materials useful for skin repair. In the present work, blended membranes composed of chitosan (Cht) and aloe vera gel were prepared through the solvent casting, and were crosslinked with genipin to improve their properties. Topography, swelling, wettability, mechanical properties and in vitro cellular response of the membranes were investigated. With the incorporation of aloe vera gel into chitosan solution, the developed chitosan/aloe-based membranes displayed increased roughness and wettability; while the genipin crosslinking promoted the formation of stiffer membranes in comparison to those of the non-modified membranes. Moreover, in vitro cell culture studies evidenced that the L929 cells have high cell viability, confirmed by MTS test and calcein-AM staining. The findings suggested that both blend compositions and crosslinking affected the physico-chemical properties and cellular behavior of the developed membranes.     

Combined effects of direct current stimulation and immobilized BMP‐2 for enhancement of osteogenesis

Direct current (DC) stimulation has been used to promote bone repair and osteogenesis, but problems associated with the implanted metal electrodes may limit its application and compromise the therapeutic results. The replacement of the metal electrodes with a biodegradable conductive polymer film can potentially overcome these problems. In our work, polypyrrole/chitosan films comprising polypyrrole nanoparticles dispersed in a chitosan matrix were prepared. The polypyrrole/chitosan film meets the requirements for DC delivery, as indicated by its electrical conductivity, biodegradability, and mechanical properties. The film supports osteoblast growth to the same degree as dentine discs (a bone‐like mineralized substrate), confirming that it is non‐cytotoxic. Our results showed that optimal DC stimulation was achieved with 200 µA for 4 h per day, and under this condition, osteoblast metabolic activity on Day 7 increased by 1.8‐fold over that without DC stimulation. To further improve osteogenesis on the polypyrrole/chitosan film, bone morphogenetic protein‐2 (BMP‐2) was covalently immobilized on the film surface. Osteoblasts cultured on the BMP‐2‐functionalized polypyrrole/chitosan film and subjected to the optimal DC stimulation exhibited a significant increase in cellular metabolic activity (2.3‐fold on Day 7), ALP activity (1.7‐fold on Day 21) and mineralization (twofold on Day 21) over those cultured on polypyrrole/chitosan film without DC stimulation. Osteogenic gene expression results showed that BMP‐2 and DC stimulation by itself enhanced osteoblast differentiation, and a combination of these two factors resulted in synergistic effects on osteoblast differentiation and maturation. Biotechnol. Bioeng. 2013; 110: 1466–1475. © 2012 Wiley Periodicals, Inc.     

Biomimetic repeat protein derived from Xenopus tropicalis for fibrous scaffold fabrication

Collagen, silk, and elastin are the fibrous proteins consist of representative amino acid repeats. Because these proteins exhibited distinguishing mechanical properties, they have been utilized in diverse applications, such as fiber‐based sensors, filtration membranes, supporting materials, and tissue engineering scaffolds. Despite their infinite prevalence and potential, most studies have only focused on a few repeat proteins. In this work, the hypothetical protein with a repeat motif derived from the frog Xenopus tropicalis was obtained and characterized for its potential as a novel protein‐based material. The codon‐optimized recombinant frog repeat protein, referred to as ‘xetro’, was produced at a high rate in a bacterial system, and an acid extraction‐based purified xetro protein was successfully fabricated into microfibers and nanofibers using wet spinning and electrospinning, respectively. Specifically, the wet‐spun xetro microfibers demonstrated about 2‐ and 1.5‐fold higher tensile strength compared with synthetic polymer polylactic acid and cross‐linked collagen, respectively. In addition, the wet‐spun xetro microfibers showed about sevenfold greater stiffness than collagen. Therefore, the mass production potential and greater mechanical properties of the xetro fiber may result in these fibers becoming a new promising fiber‐based material for biomedical engineering. © 2015 Wiley Periodicals, Inc. Biopolymers 103: 659–664, 2015.     

Film-forming process and biocide assessment of high-molecular-weight chitosan as determined by combined ATR-FTIR spectroscopy and antimicrobial assays

This pioneering study reported about the film-forming properties of high-molecular-weight chitosan as followed in situ by attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy, and has implications in fields such as biomedical, pharmaceutical, packaging, and coating applications. From the results, it was observed that immediately after dissolution in an acetic acid aqueous solution and subsequent casting over the ATR crystal, the formed carboxylate antimicrobial (-NH3+ -OOCH) species are not stable in the film formulation and become reduced over time; further assays confirmed previous research, which suggested that the presence and stability of these groups is strongly dependent, among other factors, on storage conditions. As-received chitosan and chitosan neutralized in NaOH films did not exhibit biocide performance towards Staphylococcus aureus. The antimicrobial tests were also found to strongly relate the presence of a sufficient quantity of these carboxylate groups to the chitosan activity as a biocide agent. Moreover, a novel methodology based on the use of a normalized infrared band centered at 1405 cm(-1) is proposed which can be correlated with the antimicrobial character of the biopolymer.     

Tuning the Hydrophilic/Hydrophobic Balance to Control the Structure of Chitosan Films and Their Protein Release Behavior

The control over the crystallinity of chitosan and chitosan/ovalbumin films can be achieved via an appropriate balance of the hydrophilic/hydrophobic interactions during the film formation process, which then controls the release kinetics of ovalbumin. Chitosan films were prepared by solvent casting. The presence of the anhydrous allomorph can be viewed as a probe of the hydrophobic conditions at the neutralization step. The semicrystalline structure, the swelling behavior of the films, the protein/chitosan interactions, and the release behavior of the films were impacted by the DA and the film processing parameters. At low DAs, the chitosan films neutralized in the solid state corresponded to the most hydrophobic environment, inducing the crystallization of the anhydrous allomorph with and without protein. The most hydrophilic conditions, leading to the hydrated allomorph, corresponded to non-neutralized films for the highest DAs. For the non-neutralized chitosan acetate (amorphous) films, the swelling increased when the DA decreased, whereas for the neutralized chitosan films, the swelling decreased. The in vitro release of ovalbumin (model protein) from chitosan films was controlled by their swelling behavior. For fast swelling films (DA?=?45%), a burst effect was observed. On the contrary, a lag time was evidenced for DA?=?2.5% with a limited release of the protein. Furthermore, by blending chitosans (DA?=?2.5% and 45%), the release behavior was improved by reducing the burst effect and the lag time. The secondary structure of ovalbumin was partially maintained in the solid state, and the ovalbumin was released under its native form.     

Potential of 2D crosslinked sericin membranes with improved biostability for skin tissue engineering

Silk sericin protein is a natural, hydrophilic, macromolecular glycoprotein mainly synthesized in the middle silk gland of the silkworm. It constitutes 25–30% of the silk cocoon. Sericin proteins have antioxidant, antimicrobial, UV-resistant properties, promote wound healing and support cell proliferation even in serum-free media. Most of the sericin is discarded as waste in silk processing industries. This study aims at improving the mechanical strength and stability of sericin extracted from the silk cocoons during processing and utilize it as a biocompatible natural biopolymer in biomedical applications. Crosslinked sericin membranes, from the cocoon of non-mulberry tropical silkworm, Antheraea mylitta, were prepared using gluteraldehyde as the crosslinking agent. Physical and structural characteristics of the membranes were analyzed using scanning electron microscopy, atomic force microscopy, Fourier transform infrared spectroscopy and X-ray diffraction along with swelling and degradation studies. The secondary structure of the membrane indicates that crosslinking provides a more integrated structure that significantly improves the stability and mechanical strength of the membranes. In vitro cytocompatibility of the membranes was evaluated by MTT assay and cell cycle analysis of feline fibroblast cells. The adherence, growth and proliferation patterns of cells on membranes were assessed by confocal microscopy, which demonstrated that the latter is non-toxic and supports cell growth. Cell cycle analyses indicate cytocompatibility with normal cell cycle pattern. This study reveals that silk sericin protein can be used as a biocompatible natural biopolymer for various applications in the biomedical field.     

Effect of solvent-dependent viscoelastic properties of chitosan membranes on the permeation of 2-phenylethanol

The viscoelastic behaviour of chitosan was followed by dynamic mechanical analysis (DMA) while the sample was immersed in gradient compositions of water/ethanol mixtures. The swelling equilibrium of chitosan membranes, both crosslinked with genipin or not, increased linearly with the water content. Increasing the water content, it was simultaneously observed a peak in the loss factor (around 25 vol.%) and a reduction of the storage modulus, which was attributed to the α-relaxation of chitosan. This was the first time that the glass transition dynamics in a polymer was monitored in immersion conditions where the composition of the plasticizer in the bath is changed in a controlled way. The water content at which tan δ presented a maximum increased with both increasing frequency and increasing crosslinking density. The permeability decreased steadily with the ethanol content, reaching very low values around the glass transition. Therefore we hypothesize that conformational mobility of the polymeric chains may play an important role in the diffusion properties of molecules trough polymeric matrices.     

Synthesis, characterization, cytotoxicity and antibacterial studies of chitosan, O-carboxymethyl and N,O-carboxymethyl chitosan nanoparticles

Chitosan (CS) is a naturally occurring biopolymer. It has important biological properties such as biocompatibility, antifungal and antibacterial activity, wound healing ability, anticancerous property, anticholesteremic properties, and immunoenhancing effect. Recently, CS nanoparticles have been used for biomedical applications. However, due to the limited solubility of CS in water its water-soluble derivatives are preferred for the above said applications. In this work, the nanoparticles of CS and its water-soluble derivatives such as O-carboxymethyl chitosan (O-CMC) and N,O-carboxymethyl chitosan (N,O-CMC) was synthesized and characterized. In addition, cytotoxicity and antibacterial activity of the prepared nanoparticles was also evaluated for biomedical applications.     

Silk scaffolds connected with different naturally occurring biomaterials for prostate cancer cell cultivation in 3D

In the present work, different biopolymer blend scaffolds based on the silk protein fibroin from Bombyx mori (BM) were prepared via freeze‐drying method. The chemical, structural, and mechanical properties of the three dimensional (3D) porous silk fibroin (SF) composite scaffolds of gelatin, collagen, and chitosan as well as SF from Antheraea pernyi (AP) and the recombinant spider silk protein spidroin (SSP1) have been systematically investigated, followed by cell culture experiments with epithelial prostate cancer cells (LNCaP) up to 14 days. Compared to the pure SF scaffold of BM, the blend scaffolds differ in porous morphology, elasticity, swelling behavior, and biochemical composition. The new composite scaffold with SSP1 showed an increased swelling degree and soft tissue like elastic properties. Whereas, in vitro cultivation of LNCaP cells demonstrated an increased growth behavior and spheroid formation within chitosan blended scaffolds based on its remarkable porosity, which supports nutrient supply matrix. Results of this study suggest that silk fibroin matrices are sufficient and certain SF composite scaffolds even improve 3D cell cultivation for prostate cancer research compared to matrices based on pure biomaterials or synthetic polymers.     

Antioxidant,Cytotoxic and Antimicrobial Activity of Chitosan Preparations Extracted from Ganoderma Lucidum Mushroom

Two chitosan extracts were prepared by chemical and enzymatic treatment of Ganoderma lucidum mushroom, as an alternative source to crustacean shells. The molecular weight of the enzymatic extract was lower than that of the chemical one and of shrimp chitosan, as determined by viscosity measurements. Characteristic signals were identified in the ¹H‐NMR spectra and high deacetylation degree indicated good physico‐chemical properties for both mushroom chitosan extracts. The scavenging capacity of mushroom chitosan extracts was moderate against the synthetic radicals of 2,2′‐azinobis(3‐ethylbenzothiazoline‐6‐sulfonic acid) (ABTS) and 1,1‐diphenyl‐2‐picrylhydrazyl (DPPH), but higher values were observed for the enzymatic extract, compared to the chemical extract and shrimp chitosan. In vitro cytotoxicity was evaluated in L929 mouse fibroblast cell lines and the results of MTT assay showed good cytocompatibility in the tested range of concentrations. The growth of Gram‐positive bacteria was inhibited more than Gram‐negative bacteria in the presence of mushroom chitosan extracts, in particular by the chemical one, indicating their efficiency as antimicrobial agents. All these results strengthen the evidence of mushroom polysaccharide preparations availability for biomedical applications.     

Effect of Formulation and Process Parameters on Chitosan Microparticles Prepared by an Emulsion Crosslinking Technique

There are many studies about the synthesis of chitosan microparticles; however, most of them have very low production rate, have wide size distribution, are difficult to reproduce, and use harsh crosslinking agents. Uniform microparticles are necessary to obtain repeatable drug release behavior. The main focus of this investigation was to study the effect of the process and formulation parameters during the preparation of chitosan microparticles in order to produce particles with narrow size distribution. The technique evaluated during this study was emulsion crosslinking technique. Chitosan is a biocompatible and biodegradable material but lacks good mechanical properties; for that reason, chitosan was ionically crosslinked with sodium tripolyphosphate (TPP) at three different ratios (32, 64, and 100%). The model drug used was acetylsalicylic acid (ASA). During the preparation of the microparticles, chitosan was first mixed with ASA and then dispersed in oil containing an emulsifier. The evaporation of the solvents hardened the hydrophilic droplets forming microparticles with spherical shape. The process and formulation parameters were varied, and the microparticles were characterized by their morphology, particle size, drug loading efficiency, and drug release behavior. The higher drug loading efficiency was achieved by using 32% mass ratio of TPP to chitosan. The average microparticle size was 18.7 μm. The optimum formulation conditions to prepare uniform spherical microparticles were determined and represented by a region in a triangular phase diagram. The drug release analyses were evaluated in phosphate buffer solution at pH 7.4 and were mainly completed at 24 h.     

Sequence and domain arrangements influence mechanical properties of elastin‐like polymeric elastomers

Elastin is the polymeric, extracellular matrix protein that provides properties of extensibility and elastic recoil to large arteries, lung parenchyma, and other tissues. Elastin assembles by crosslinking through lysine residues of its monomeric precursor, tropoelastin. Tropoelastin, as well as polypeptides based on tropoelastin sequences, undergo a process of self‐assembly that aligns lysine residues for crosslinking. As a result, both the full‐length monomer as well as elastin‐like polypeptides (ELPs) can be made into biomaterials whose properties resemble those of native polymeric elastin. Using both full‐length human tropoelastin (hTE) as well as ELPs, we and others have previously reported on the influence of sequence and domain arrangements on self‐assembly properties. Here we investigate the role of domain sequence and organization on the tensile mechanical properties of crosslinked biomaterials fabricated from ELP variants. In general, substitutions in ELPs involving similiar domain types (hydrophobic or crosslinking) had little effect on mechanical properties. However, modifications altering either the structure or the characteristic sequence style of these domains had significant effects on such properties. In addition, using a series of deletion and replacement constructs for full‐length hTE, we provide new insights into the role of conserved domains of tropoelastin in determining mechanical properties. © 2012 Wiley Periodicals, Inc. Biopolymers 99: 392–407, 2013.     

A new route for chitosan immobilization onto polyethylene surface

Low-density polyethylene (LDPE) belongs to commodity polymer materials applied in biomedical applications due to its favorable mechanical and chemical properties. The main disadvantage of LDPE in biomedical applications is low resistance to bacterial infections. An antibacterial modification of LDPE appears to be a solution to this problem. In this paper, the chitosan and chitosan/pectin multilayer was immobilized via polyacrylic acid (PAA) brushes grafted on the LDPE surface. The grafting was initiated by a low-temperature plasma treatment of the LDPE surface. Surface and adhesive properties of the samples prepared were investigated by surface analysis techniques. An antibacterial effect was confirmed by inhibition zone measurements of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The chitosan treatment of LDPE led to the highest and most clear inhibition zones (35mm(2) for E. coli and 275mm(2) for S. aureus).