Aqueous synthesis of CdTe/CdS/ZnS quantum dots and their optical and chemical properties

In this paper, we described a strategy for synthesis of thiol‐coated CdTe/CdS/ZnS (core–shell–shell) quantum dots (QDs) via aqueous synthesis approach. The synthesis conditions were systematically optimized, which included the size of CdTe core, the refluxing time and the number of monolayers and the ligands, and then the chemical and optical properties of the as‐prepared products were investigated. We found that the mercaptopropionic acid (MPA)‐coated CdTe/CdS/ZnS QDs presented highly photoluminescent quantum yields (PL QYs), good photostability and chemical stability, good salt tolerance and pH tolerance and favorable biocompatibility. The characterization of high‐resolution transmission electron microscopy (HRTEM), X‐ray powder diffraction (XRD) and fluorescence correlation spectroscopy (FCS) showed that the CdTe/CdS/ZnS QDs had good monodispersity and crystal structure. The fluorescence life time spectra demonstrated that CdTe/CdS/ZnS QDs had a longer lifetime in contrast to fluorescent dyes and CdTe QDs. Furthermore, the MPA‐stabilized CdTe/CdS/ZnS QDs were applied for the imaging of cells. Compared with current synthesis methods, our synthesis approach was reproducible and simple, and the reaction conditions were mild. More importantly, our method was cost‐effective, and was very suitable for large‐scale synthesis of CdTe/CdS/ZnS QDs for future applications. Copyright © 2010 John Wiley & Sons, Ltd.     

Dark‐red‐emitting CdTe/Cd1‐xZnxS core/shell quantum dots: preparation and properties

CdTe nanocrystals (NCs) were fabricated through an organic synthesis. The growth and properties of CdTe NCs depended strongly on the preparation conditions. In a reaction system of octadecene and tetradecylphosphonic acid (TDPA), the growth was slow. CdTe NCs with cubic‐like morphology were created in trioctylamine (TOA) using octadecylphosphonic acid (ODPA)‐CdO or TDPA‐CdO as precursors. The TOA and ODPA system gives rise to NCs with high photoluminescence (PL) efficiencies (12%). A Cd_xZn_1‐xS shell coating on the CdTe core, gave rise to tunable dark red PL (630–670 nm). The morphology and PL properties of the CdTe cores were drastically affected by shell coating and this determined the properties of CdTe/Cd_xZn_1‐xS NCs. Small CdTe NCs were easily coated with Cd_xZn_1‐xS shells. The resulting core/shell NCs revealed a spherical morphology. However, shell growth became slow when large CdTe cores were used. This is ascribed to the cores with a cubic‐like morphology. CdS interlayer plays an important role for the formation of the CdTe/Cd_xZn_1‐xS NCs because the experimental result indicated it is difficult to coat CdTe NCs with a ZnS shell. The core/shell NCs benefited from a Cd_xZn_1‐xS composite shell because CdTe/CdS NCs created via a similar procedure revealed a low PL efficiency. Copyright © 2012 John Wiley & Sons, Ltd.     

Molecular spectroscopic studies on the interactions of rhein and emodin with thioglycolic acid‐capped core/shell CdTe/CdS quantum dots and their analytical applications

Water‐soluble thioglycolic acid (TGA)‐capped core/shell CdTe/CdS quantum dots (QDs) were synthesized. The interactions of rhein and emodin with TGA‐CdTe/CdS QDs were evaluated by fluorescence and ultraviolet‐visible absorption spectroscopy. Experimental results showed that the high fluorescence intensity of TGA‐CdTe/CdS QDs could be effectively quenched in the presence of rhein (or emodin) at 570 nm, which may have resulted from an electron transfer process from excited TGA‐CdTe/CdS QDs to rhein (or emodin). The quenching intensity was in proportion to the concentration of both rhein and emodin in a certain range. Under optimized conditions, the linear ranges of TGA‐CdTe/CdS QDs fluorescence intensity versus the concentration of rhein and emodin were 0.09650–60 µg/mL and 0.1175–70 µg/mL with a correlation coefficient of 0.9984 and 0.9965, respectively. The corresponding detection limits (3σ/S) of rhein and emodin were 28.9 and 35.2 ng/mL, respectively. This proposed method was applied to determine rhein and emodin in human urine samples successfully with remarkable advantages such as high sensitivity, short analysis time, low cost and easy operation. Based on this, a simple, rapid and highly sensitive method to determine rhein (or emodin) was proposed. Copyright © 2014 John Wiley & Sons, Ltd.     

Size‐dependent temperature sensitivity of photoluminescence peak position of CdTe quantum dots

The size dependence of the temperature coefficient (sensitivity) of the photoluminescence (PL) peak position of CdTe quantum dots stabilized by thioglycolic acid in aqueous solution has been investigated. Temperature sensitivity increases as the average radius of CdTe quantum dots decraeases. This must be taken into account in the design of solar light concentrators and light‐emmiting diode‐monitors as well as other technologies in which a fine tuning of the light emission is important. Copyright © 2013 John Wiley & Sons, Ltd.     

Novel fluoroimmunoassays for detecting ochratoxin A using CdTe quantum dots

Novel direct and indirect competitive fluorescence‐linked immunosorbent assays (c FLISA and ic FLISA) for detection of ochratoxin A (OTA) were described using CdTe quantum dots (QDs) as fluorescent label. CdTe QDs were successfully synthesized, which had an emission wavelength of 615 nm. The high purity monoclonal antibody against OTA was prepared through cell thawing and the octylic acid‐ammonium sulfate method. The OTA MAbs were successfully coupled with CdTe QDs, and which also retained the original biological activity. The 50% inhibition values (IC₅₀) of the c FLISA and ic FLISA were 0.630 ng/mL, 0.234 ng/mL, the limits of detection (LOD) were 7.06 × 10^–3 and 4.15 × 10^–3 ng/mL, and detection ranges were 7.06 × 10^–3 ? 18.34 ng/mL and 4.15 × 10^–3 ? 4.88 ng/mL, in‐order. The recoveries were 96.0–104.7% along with coefficients of variation (CVs) below 10%. The FLISA provided novel method for determination of OTA and the potential of MAb–CdTe QDs for the establishment of fluorescent immunochromatographic test strip.

     

CdTe/ZnS quantum dots as fluorescent probes for ammonium determination

Novel CdTe/ZnS quantum dot (QD) probes based on the quenching effect were proposed for the simple, rapid, and specific determination of ammonium in aqueous solutions. The QDs were modified using 3‐mercaptopropionic acid, and the fluorescence responses of the CdTe/ZnS QD probes to ammonium were detected through regularity quenching. The quenching levels of the CdTe/ZnS QDs and ammonium concentration showed a good linear relationship between 4.0 × 10^?6 and 5.0 × 10^?4 mol/L; the detection limit was 3.0 × 10^?7 mol/L. Ammonium contents in synthetic explosion soil samples were measured to determine the practical applications of the QD probes and a probable quenching mechanism was described. Copyright © 2015 John Wiley & Sons, Ltd.     

Deposition of CdS,CdS/ZnSe and CdS/ZnSe/ZnS shells around CdSeTe alloyed core quantum dots: effects on optical properties

In this work, we synthesized water‐soluble L ‐cysteine‐capped alloyed CdSeTe core quantum dots (QDs) and investigated the structural and optical properties of deposition of each of CdS, CdS/ZnSe and CdS/ZnSe/ZnS shell layers. Photophysical results showed that the overcoating of a CdS shell around the alloyed CdSeTe core [quantum yield (QY) = 8.4%] resulted in effective confinement of the radiative exciton with an improved QY value of 93.5%. Subsequent deposition of a ZnSe shell around the CdSeTe/CdS surface decreased the QY value to 24.7%, but an increase in the QY value of up to 49.5% was observed when a ZnS shell was overcoated around the CdSeTe/CdS/ZnSe surface. QDs with shell layers showed improved stability relative to the core. Data obtained from time‐resolved fluorescence measurements provided useful insight into variations in the photophysical properties of the QDs upon the formation of each shell layer. Our study suggests that the formation of CdSeTe/CdS core/shell QDs meets the requirements of quality QDs in terms of high photoluminescence QY and stability, hence further deposition of additional shells are not necessary in improving the optical properties of the core/shell QDs. Copyright © 2015 John Wiley & Sons, Ltd.     

Imaging Escherichia coli using functionalized core/shell CdSe/CdS quantum dots

The internalization of a series of water-soluble CdSe/CdS quantum dots (QDs) stabilized by citrate, isocitrate, succinate, and malate by Escherichia coli is established by epifluorescence and confocal fluorescence scanning microscopy, fluorimetry, and UV–vis spectroscopy on whole and lysed bacterial cells. The organic-acid-stabilized QDs span a range in size from 3.8±1.1 to 6.0±2.4 nm with emission wavelengths from 540 to 630 nm. QDs of different sizes (i.e., 3.8–6 nm) can enter the bacterium and be detected on different fluorescence channels with little interference from other QDs as a result of the distinct emission profiles (i.e., 540–630 nm, respectively). Costaining QD-labeled E. coli with 4′,6-diamidino-2-phenylindole dihydrochloride (DAPI) demonstrates that the QDs and DAPI are colocalized within E. coli, whereas costaining QD-labeled E. coli with membrane dye FM4-64 shows that the FM4-64 is localized in the outer bacterial membrane and that the QDs are inside.Electronic Supplementary Material Supplementary material is available to authorized users in the online version of this article at .     

Synthesis of highly luminescent and biocompatible CdTe/CdS/ZnS quantum dots using microwave irradiation: a comparative study of different ligands

We compared the effects of several ligands frequently used in aqueous synthesis, including L‐cysteine, L‐cysteine hydrochloride, N‐acetyl‐L‐cysteine (NAC), glutathione and 3‐mercaptopropionic acid, for microwave synthesis of CdTe quantum dots (QDs) in a sealed vessel with varied temperatures and times, and then developed a rapid microwave‐assisted protocol for preparing highly luminescent, photostable and biocompatible CdTe/CdS/ZnS core–multishell QDs. The effects of molecular structures of these ligands on QD synthesis under high temperatures were explored. Among these ligands, NAC was found to be the optimal ligand in terms of the optical properties of resultant QDs and reaction conditions. The emission wavelength of NAC‐capped CdTe QDs could reach 700 nm in 5 min by controlling the reaction temperature, and the resultant CdTe/CdS/ZnS core–multishell QDs could achieve the highest quantum yields up to 74% with robust photostability. In addition, the effects of temperature, growth time and shell–precursor ratio on shell growth were examined. Finally, cell culturing indicated the low cytotoxicity of CdTe/CdS/ZnS core–multishell QDs as compared to CdTe and CdTe/CdS QDs, suggesting their high potential for applications in biomedical imaging and diagnostics. Copyright © 2014 John Wiley & Sons, Ltd.     

Fluorescence quenching investigation on the interaction of glutathione‐CdTe/CdS quantum dots with sanguinarine and its analytical application

Water‐soluble glutathione (GSH)‐capped core/shell CdTe/CdS quantum dots (QDs) were synthesized. In pH 5.4 sodium phosphate buffer medium, the interaction between GSH‐CdTe/CdS QDs and sanguinarine (SA) was investigated by spectroscopic methods, including fluorescence spectroscopy and ultraviolet‐visible absorption spectroscopy. Addition of SA to GSH‐CdTe/CdS QDs results in fluorescence quenching of GSH‐CdTe/CdS QDs. Quenching intensity was in proportion to the concentration of SA in a certain range. Investigation of the quenching mechanism, proved that the fluorescence quenching of GSH‐CdTe/CdS QDs by SA is a result of electron transfer. Based on the quenching of the fluorescence of GSH‐CdTe/CdS QDs by SA, a novel, simple, rapid and specific method for SA determination was proposed. The detection limit for SA was 3.4 ng/mL and the quantitative determination range was 0.2–40.0 µg/mL with a correlation coefficient of 0.9988. The method has been applied to the determination of SA in synthetic samples and fresh urine samples of healthy human with satisfactory results. Copyright © 2013 John Wiley & Sons, Ltd.     

Effect of concentration and shell thickness on the optical behavior of aqueous CdTe/ZnSe core/shell quantum dots (QDs) exposed to ionizing radiation

In this work CdTe/ZnSe core/shell quantum dots (QDs) were synthesized via a simple, rapid and room temperature photochemical approach. Optical properties of aqueous prepared CdTe/ZnSe QDs were studied systematically under gamma irradiation with dose range of 0 Gy to 20 kGy. The obtained results showed a regular red shift behavior versus gamma irradiation dose, in photoluminescence peak and absorption edge of the CdTe/ZnSe QDs. Structural properties of CdTe/ZnSe QDs before and after gamma irradiation were characterized by means of X-ray diffraction (XRD), Raman and Fourier-transform infrared (FT-IR) analyses. The obtained results showed that the crystalline structure of CdTe/ZnSe core/shell QDs did not change after gamma irradiation. Concentration and shell thickness as two important factors on the sensitivity of CdTe/ZnSe QDs in front of gamma irradiation have been investigated. Based on this study, CdTe/ZnSe QDs are suggested as good candidates for gamma dosimeter.     

Study on the fluorescence resonance energy transfer between CdS quantum dots and Eosin Y

Water‐soluble CdS quantum dots (QDs) were prepared using mercaptoacetic acid (TGA) as the stabilizer in an aqueous system. A fluorescence resonance energy transfer (FRET) system was constructed between water‐soluble CdS QDs (donor) and Eosin Y (acceptor). Several factors that impacted the fluorescence spectra of the FRET system, such as pH (3.05–10.10), concentration of Eosin Y (2–80 mg/L) and concentration of CdS QDs (2–80 mg/L), were investigated and refined. Donor‐to‐acceptor ratios, the energy transfer efficiency (E) and the distance (r) between CdS QDs and Eosin Y were obtained. The results showed that a FRET system could be established between water‐soluble CdS QDs and Eosin Y at pH 5.0; donor‐to‐acceptor ratios demonstrated a 1: 8 proportion of complexes; the energy transfer efficiency (E) and the distance (r) between the QDs and Eosin Y were 20.07% and 4.36 nm,respectively. Copyright © 2014 John Wiley & Sons, Ltd.     

Fluorescent probe for detection of Cu2+ using core‐shell CdTe/ZnS quantum dots

Core‐shell CdTe/ZnS quantum dots capped with 3‐mercaptopropionic acid (MPA) were successfully synthesized in aqueous medium by hydrothermal synthesis. These quantum dots have advantages compared to traditional quantum dots with limited biological applications, high toxicity and tendency to aggregate. The concentration of Cu²⁺ has a significant impact on the fluorescence intensity of quantum dots (QDs), therefore, a rapid sensitive and selective fluorescence probe has been proposed for the detection of Cu²⁺ in aqueous solution. Under optimal conditions, the fluorescence intensity of CdTe/ZnS QDs was linearly proportional to the concentration of Cu²⁺ in the range from 2.5 × 10^–9 M to 17.5 × 10^–7 M with the limit of 1.5 × 10^–9 M and relative standard deviation of 0.23%. The quenching mechanism is static quenching with recoveries of 97.30–102.75%. Copyright © 2015 John Wiley & Sons, Ltd.     

Resonance Rayleigh‐scattering spectral method for the determination of some aminoglycoside antibiotics using CdTe quantum dots as a probe

A novel method is used for the determination of some aminoglycoside antibiotics (AGs) such as etimicin (ETM), isepamicin (ISP) and amikacin (AMK). It is based on the resonance Rayleigh scattering (RRS) intensities enhanced by AGs‐induced CdTe quantum dots aggregation. Under the optimum conditions, the increments in RRS intensity were directly proportional to the concentration of AGs in certain ranges. At the same time, the second‐order scattering, the frequency‐doubling scattering and the frequency‐trebling scattering intensities were also enhanced and their increments were proportional to the concentration of AGs. Among them, the RRS method had the highest sensitivity; the linear ranges and detection limits for ETM, ISP and AMK were 0.085–7.2, 0.0067–1.2, 0.017–6.0 and 0.025, 0.0051, 0.0020 μg mL^?1. This method was applied to the measurement of AGs in human serum and urine with satisfactory results. In addition, the reaction mechanism and the reasons for the enhancement of RRS are discussed using fluorescence, RRS, transmission electron microscope technology and quantum chemistry method. Copyright © 2009 John Wiley & Sons, Ltd.     

A sensitive fluorescent nanosensor for chloramphenicol based on molecularly imprinted polymer‐capped CdTe quantum dots

A novel fluorescent nanosensor using molecularly imprinted silica nanospheres embedded CdTe quantum dots (CdTe@SiO₂@MIP) was developed for detection and quantification of chloramphenicol (CAP). The imprinted sensor was prepared by synthesis of molecularly imprinting polymer (MIP) on the hydrophilic CdTe quantum dots via reverse microemulsion method using small amounts of solvents. The resulting CdTe@SiO₂@MIP nanoparticles were characterized by fluorescence, UV–vis absorption and FT‐IR spectroscopy and transmission electron microscopy. They preserved 48% of fluorescence quantum yield of the parent quantum dots. CAP remarkably quenched the fluorescence of prepared CdTe@SiO₂@MIP, probably via electron transfer mechanism. Under the optimal conditions, the relative fluorescence intensity of CdTe@SiO₂@MIP decreased with increasing CAP by a Stern–Volmer type equation in the concentration range of 40–500 µg L^–1. The corresponding detection limit was 5.0 µg L^–1. The intra‐day and inter‐day values for the precision of the proposed method were all <4%. The developed sensor had a good selectivity and was applied to determine CAP in spiked human and bovine serum and milk samples with satisfactory results. Copyright © 2015 John Wiley & Sons, Ltd.     

Development of acetylcholinesterase biosensor based on CdTe quantum dots/gold nanoparticles modified chitosan microspheres interface

In this paper, a novel acetylcholinesterase (AChE) biosensor was constructed by modifying glassy carbon electrode with CdTe quantum dots (QDs) and excellent conductive gold nanoparticles (GNPs) though chitosan microspheres to immobilize AChE. Since GNPs have shown widespread use particularly for constructing electrochemical biosensors through their high electron-transfer ability, the combined AChE exhibited high affinity to its substrate and thus a sensitive, fast and cheap method for determination of monocrotophos. The combination of CdTe QDs and GNPs promoted electron transfer and catalyzed the electro-oxidation of thiocholine, thus amplifying the detection sensitivity. This novel biosensing platform based on CdTe QDs-GNPs composite responded even more sensitively than that on CdTe QDs or GNPs alone because of the presence of synergistic effects in CdTe-GNPs film. The inhibition of monocrotophos was proportional to its concentration in two ranges, from 1 to 1000ngmL(-1) and from 2 to 15mugmL(-1), with a detection limit of 0.3ngmL(-1). The proposed biosensor showed good precision and reproducibility, acceptable stability and accuracy in garlic samples analysis.     

Highly luminescent hybrid SiO2‐coated CdTe quantum dots: synthesis and properties

Novel hybrid SiO₂‐coated CdTe quantum dots (QDs) were created using CdTe QDs coated with a hybrid SiO₂ shell containing Cd²⁺ ions and a sulfur source via a sol–gel process in aqueous solution. Aqueous CdTe QDs with tunable emitting color created through a reaction between cadmium chloride and sodium hydrogen telluride was used as cores for the preparation of hybrid SiO₂‐coated CdTe QDs. In our experiments we found that the surface state of the cores and preparation conditions that affect the formation of the hybrid SiO₂ shell also greatly affect photoluminescence of the hybrid SiO₂‐coated CdTe QDs. The generation of CdS‐like clusters in the vicinity of the CdTe QDs, caused the quantum size effect of the QDs to be greatly reduced, which changes photoluminescence properties of the hybrid QDs fundamentally. Namely, the novel hybrid SiO₂ shell played an important role in generating a series of specific optical properties. In addition, the novel hybrid SiO₂ shell can be created if no CdTe QD is added. In order to gain an insight into the inter structure of the hybrid shell, we characterized the hybrid SiO₂‐coated CdTe QDs using X‐ray diffraction analysis and discuss the formation mechanism of such a hybrid structure. This work is significant because the novel hybrid SiO₂‐coated CdTe QDs with its excellent properties can be used in many applications, such as biolabeling and optoelectronic devices. Copyright © 2013 John Wiley & Sons, Ltd.     

Photoluminescence properties of hybrid SiO2‐coated CdTe/CdSe quantum dots

Hybrid SiO₂‐coated CdTe/CdSe quantum dots (QDs) were prepared using CdTe/CdSe QDs prepared by hydrothermal synthesis. A CdSe interlayer made CdTe/CdSe cores with unique type II heterostructures. The hybrid SiO₂‐coated CdTe/CdSe QDs revealed excellent photoluminescence (PL) properties compared with hybrid SiO₂‐coated CdTe QDs. Because of the existence of spatial separations of carriers in the type II CdTe/CdSe core/shell QDs, the hybrid QDs had a relatively extended PL lifetime and high stability in phosphate‐buffered saline buffer solutions. This is ascribed to the unique components and stable surface state of hybrid SiO₂‐coated CdTe/CdSe QDs. During the stabilization test in phosphate‐buffered saline buffer solutions, both static and dynamic quenching occurred. The quenching mechanism of the hybrid QDs was not suited with the Stern–Volmer equation. However, the relative stable surface of CdTe/CdSe QDs resulted in lower degradation and relative high PL quantum yields compared with hybrid SiO₂‐coated CdTe QDs. As a result, hybrid SiO₂‐coated CdTe/CdSe QDs can be used in bioapplications. Copyright © 2013 John Wiley & Sons, Ltd.     

Graphite oxide‐dispersed CdTe quantum dots nanocomposite for flexible display luminescent membranes

A quantum dot (QD) dispersant material was prepared using graphite oxide (GO). Luminescent films were prepared using polyvinyl alcohol as the polymer matrix. First, water‐soluble CdTe QDs were prepared by wet chemistry and GO was synthesized using a modified Hummers method. X‐Ray diffraction tests showed that the GO reflection peak [001] was 11.9°, which indicates that the d‐spacing is 0.7431 nm; atomic force microscopy showed a GO thickness of 200 nm. Fourier transform infrared spectra showed vibrations at 1624 cm^?1 for the carbonyl groups, and 3260 cm^?1 for the GO samples; the ‐C–O vibration was at 1320 cm^?1 and ‐COOH, ?OH vibrations were at 950 cm^?1. Fluorescent tests showed that pH had an impact on the QD colloidal stability. GO was neutralized before use as the host media for the GO/QDs nanocomposite. The results proved that the resultant nanocomposite is promising for use in brightness enhancement films in flexible displays.     

Sensitive detection of sodium cromoglycate with glutathione‐capped CdTe quantum dots as a novel fluorescence probe

A sensitive and simple analytical strategy for the detection of sodium cromoglycate (SCG) has been established based on a readily detectable fluorescence quenching effect of SCG for glutathione‐capped (GSH‐capped) CdTe quantum dots (QDs). The fluorescence of GSH‐capped CdTe QDs could be efficiently quenched by SCG through electron transfer from GSH‐capped CdTe QDs to SCG. Under optimum conditions, the response was linearly proportional to the concentration of SCG between 0.6419 and 100 µg/mL, with a correlation coefficient (R) of 0.9964; the detection limit (3δ/K) was 0.1926 µg/mL. The optimum conditions and the influence of coexisting foreign substances on the reaction were also investigated. The very effective and simple method reported here has been successfully applied to the determination of SCG in synthetic and real samples. It is believed that the established approach could have good prospects for application in the fields of clinical diseases diagnosis and treatment. Copyright © 2015 John Wiley & Sons, Ltd.