Kinetic analysis of Drosophila muscle myosin isoforms suggests a novel mode of mechanochemical coupling

The molecular mechanism of myosin function was addressed by measuring transient kinetic parameters of naturally occurring and chimeric Drosophila muscle myosin isoforms. We assessed the native embryonic isoform, the native indirect flight muscle isoform, and two chimeric isoforms containing converter domains exchanged between the indirect flight muscle and embryonic isoforms. Myosin was purified from the indirect flight muscles of transgenic flies, and S1 was produced by alpha-chymotryptic digestion. Previous studies in vertebrate and scallop myosins have shown a correlation between actin filament velocity in motility assays and cross-bridge detachment rate, specifically the rate of ADP release. In contrast, our study showed no correlation between the detachment rate and actin filament velocity in Drosophila myosin isoforms and further that the converter domain does not significantly influence the biochemical kinetics governing the detachment of myosin from actin. We suggest that evolutionary pressure on a single muscle myosin gene may maintain a fast detachment rate in all isoforms. As a result, the attachment rate and completion of the power stroke or the equilibrium between actin.myosin.ADP states may define actin filament velocity for these myosin isoforms.     

What limits the velocity of fast-skeletal muscle contraction in mammals?

In rat skeletal muscle the unloaded shortening velocity (Vo) is defined by the myosin isoform expressed in the muscle fibre. In 2001 we suggested that ADP release from actomyosin in solution (controlled by k(-AD)) was of the right size to limit Vo. However, to compare mechanical and solution kinetic data required a series of corrections to compensate for the differences in experimental conditions (0.5 M KCl, 22 degrees C for kinetic assays of myosin, 200 mM ionic strength, 12 degrees C to measure Vo). Here, a method was developed to prepare heavy meromyosin (HMM) from pure myosin isoforms isolated from single muscle fibres and to study k(-AD) (determined from the affinity of the acto-myosin complex for ADP, KAD) and the rate of ATP-induced acto-HMM dissociation (controlled by K1k+2) under the same experimental condition used to measure Vo). In fast-muscle myosin isolated from a wide range of mammalian muscles, k(-AD) was found to be too fast to limit Vo, whereas K1k+2 was of the right magnitude for ATP-induced dissociation of the cross-bridge to limit shortening velocity. The result was unexpected and prompted further experiments using the stopped-flow approach on myosin subfragment-1 (S1) and HMM obtained from bulk preparations of rabbit and rat muscle. These confirmed that the rate of cross-bridge dissociation by ATP limits the velocity of contraction for fast myosin II isoforms at 12 degrees C, while k(-AD) limits the velocity of slow myosin II isoforms. Extrapolating our data to 37 degrees C suggests that at physiological temperature the rate of ADP dissociation may limit Vo for both isoforms.     

ATP consumption and efficiency of human single muscle fibers with different myosin isoform composition

Chemomechanical transduction was studied in single fibers isolated from human skeletal muscle containing different myosin isoforms. Permeabilized fibers were activated by laser-pulse photolytic release of 1.5 mM ATP from p(3)-1-(2-nitrophenyl)ethylester of ATP. The ATP hydrolysis rate in the muscle fibers was determined with a fluorescently labeled phosphate-binding protein. The effects of varying load and shortening velocity during contraction were investigated. The myosin isoform composition was determined in each fiber by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. At 12 degrees C large variations (three- to fourfold) were found between slow and fast (2A and 2A-2B) fibers in their maximum shortening velocity, peak power output, velocity at which peak power is produced, isometric ATPase activity, and tension cost. Isometric tension was similar in all fiber groups. The ATP consumption rate increased during shortening in proportion to shortening velocity. At 12 degrees C the maximum efficiency was similar (0.21-0.27) for all fiber types and was reached at a higher speed of shortening for the faster fibers. In all fibers, peak efficiency increased to approximately 0.4 when the temperature was raised from 12 degrees C to 20 degrees C. The results were simulated with a kinetic scheme describing the ATPase cycle, in which the rate constant controlling ADP release is sensitive to the load on the muscle. The main difference between slow and fast fibers was reproduced by increasing the rate constant for the hydrolysis step, which was rate limiting at low loads. Simulation of the effect of increasing temperature required an increase in the force per cross-bridge and an acceleration of the rate constants in the reaction pathway.     

Actomyosin-ADP States, Interhead Cooperativity, and the Force-Velocity Relation of Skeletal Muscle

Despite intense efforts to elucidate the molecular mechanisms that determine the maximum shortening velocity and the shape of the force-velocity relationship in striated muscle, our understanding of these mechanisms remains incomplete. Here, this issue is addressed by means of a four-state cross-bridge model with significant explanatory power for both shortening and lengthening contractions. Exploration of the parameter space of the model suggests that an actomyosin-ADP state (AM^∗ADP) that is separated from the actual ADP release step by a strain-dependent isomerization is important for determining both the maximum shortening velocity and the shape of the force-velocity relationship. The model requires a velocity-dependent, cross-bridge attachment rate to account for certain experimental findings. Of interest, the velocity dependence for shortening contraction is similar to that for population of the AM^∗ADP state (with a velocity-independent attachment rate). This accords with the idea that attached myosin heads in the AM^∗ADP state position the partner heads for rapid attachment to the next site along actin, corresponding to the apparent increase in attachment rate in the model.     

Magnesium Modulates Actin Binding and ADP Release in Myosin Motors

We examined the magnesium dependence of five class II myosins, including fast skeletal muscle myosin, smooth muscle myosin, β-cardiac myosin (CMIIB), Dictyostelium myosin II (DdMII), and nonmuscle myosin IIA, as well as myosin V. We found that the myosins examined are inhibited in a Mg²⁺-dependent manner (0.3–9.0 mm free Mg²⁺) in both ATPase and motility assays, under conditions in which the ionic strength was held constant. We found that the ADP release rate constant is reduced by Mg²⁺ in myosin V, smooth muscle myosin, nonmuscle myosin IIA, CMIIB, and DdMII, although the ADP affinity is fairly insensitive to Mg²⁺ in fast skeletal muscle myosin, CMIIB, and DdMII. Single tryptophan probes in the switch I (Trp-239) and switch II (Trp-501) region of DdMII demonstrate these conserved regions of the active site are sensitive to Mg²⁺ coordination. Cardiac muscle fiber mechanic studies demonstrate cross-bridge attachment time is increased at higher Mg²⁺ concentrations, demonstrating that the ADP release rate constant is slowed by Mg²⁺ in the context of an activated muscle fiber. Direct measurements of phosphate release in myosin V demonstrate that Mg²⁺ reduces actin affinity in the M·ADP·P_i state, although it does not change the rate of phosphate release. Therefore, the Mg²⁺ inhibition of the actin-activated ATPase activity observed in class II myosins is likely the result of Mg²⁺-dependent alterations in actin binding. Overall, our results suggest that Mg²⁺ reduces the ADP release rate constant and rate of attachment to actin in both high and low duty ratio myosins.     

Dynamics of myosin-driven skeletal muscle contraction: I. Steady-state force generation

Skeletal muscle contraction is a canonical example of motor-driven force generation. Despite the long history of research in this topic, a mechanistic explanation of the collective myosin force generation is lacking. We present a theoretical model of muscle contraction based on the conformational movements of individual myosins and experimentally measured chemical rate constants. Detailed mechanics of the myosin motor and the geometry of the sarcomere are taken into account. Two possible scenarios of force generation are examined. We find only one of the scenarios can give rise to a plausible contraction mechanism. We propose that the synchrony in muscle contraction is due to a force-dependent ADP release step. Computational results of a half sarcomere with 150 myosin heads can explain the experimentally measured force-velocity relationship and efficiency data. We predict that the number of working myosin motors increases as the load force is increased, thus showing synchrony among myosin motors during muscle contraction. We also find that titin molecules anchoring the thick filament are passive force generators in assisting muscle contraction.     

Shaking the myosin family tree: biochemical kinetics defines four types of myosin motor

Although all myosin motors follow the same basic cross-bridge cycle, they display a large variety in the rates of transition between different states in the cycle, allowing each myosin to be finely tuned for a specific task. Traditionally, myosins have been classified by sequence analysis into a large number of sub-families (∼35). Here we use a different method to classify the myosin family members which is based on biochemical and mechanical properties. The key properties that define the type of mechanical activity of the motor are duty ratio (defined as the fraction of the time myosin remains attached to actin during each cycle), thermodynamic coupling of actin and nucleotide binding to myosin and the degree of strain-sensitivity of the ADP release step. Based on these properties we propose to classify myosins into four different groups: (I) fast movers, (II) slow/efficient force holders, (III) strain sensors and (IV) gates.     

The latch-bridge hypothesis of smooth muscle contraction

In contrast to striated muscle, both normalized force and shortening velocities are regulated functions of cross-bridge phosphorylation in smooth muscle. Physiologically this is manifested as relatively fast rates of contraction associated with transiently high levels of cross-bridge phosphorylation. In sustained contractions, Ca2+, cross-bridge phosphorylation, and ATP consumption rates fall, a phenomenon termed "latch". This review focuses on the Hai and Murphy (1988a) model that predicted the highly non-linear dependence of force on phosphorylation and a directly proportional dependence of shortening velocity on phosphorylation. This model hypothesized that (i) cross-bridge phosphorylation was obligatory for cross-bridge attachment, but also that (ii) dephosphorylation of an attached cross-bridge reduced its detachment rate. The resulting variety of cross-bridge cycles as predicted by the model could explain the observed dependencies of force and velocity on cross-bridge phosphorylation. New evidence supports modifications for more general applicability. First, myosin light chain phosphatase activity is regulated. Activation of myosin phosphatase is best demonstrated with inhibitory regulatory mechanisms acting via nitric oxide. The second modification of the model incorporates cooperativity in cross-bridge attachment to predict improved data on the dependence of force on phosphorylation. The molecular basis for cooperativity is unknown, but may involve thin filament proteins absent in striated muscle.     

The slow skeletal muscle isoform of myosin shows kinetic features common to smooth and non-muscle myosins

Fast and slow mammalian muscle myosins differ in the heavy chain sequences (MHC-2, MHC-1) and muscles expressing the two isoforms contract at markedly different velocities. One role of slow skeletal muscles is to maintain posture with low ATP turnover, and MHC-1 expressed in these muscles is identical to heavy chain of the beta-myosin of cardiac muscle. Few studies have addressed the biochemical kinetic properties of the slow MHC-1 isoform. We report here a detailed analysis of the MHC-1 isoform of the rabbit compared with MHC-2 and focus on the mechanism of ADP release. We show that MHC-1, like some non-muscle myosins, shows a biphasic dissociation of actin-myosin by ATP. Most of the actin-myosin dissociates at up to approximately 1000 s(-1), a very similar rate constant to MHC-2, but 10-15% of the complex must go through a slow isomerization (approximately 20 s(-1)) before ATP can dissociate it. Similar slow isomerizations were seen in the displacement of ADP from actin-myosin.ADP and provide evidence of three closely related actin-myosin.ADP complexes, a complex in rapid equilibrium with free ADP, a complex from which ADP is released at the rate required to define the maximum shortening velocity of slow muscle fibers (approximately 20 s(-1)), and a third complex that releases ADP too slowly (approximately 6 s(-1)) to be on the main ATPase pathway. The role of these actin-myosin.ADP complexes in the mechanochemistry of slow muscle contraction is discussed in relation to the load dependence of ADP release.     

Kinetics and thermodynamics of the rate-limiting conformational change in the actomyosin V mechanochemical cycle

We used FRET to examine the kinetics and thermodynamics of structural changes associated with ADP release in myosin V, which is thought to be a strain-sensitive step in many muscle and non-muscle myosins. We also explored essential dynamics using FIRST/FRODA starting with three different myosin V X-ray crystal structures to examine intrinsic flexibility and correlated motions. Our steady-state and time-resolved FRET analysis demonstrates a temperature-dependent reversible conformational change in the nucleotide-binding pocket (NBP). Our kinetic results demonstrate that the NBP goes from a closed to an open conformation prior to the release of ADP, while the actin-binding cleft remains closed. Interestingly, we find that the temperature dependence of the maximum actin-activated myosin V ATPase rate is similar to the pocket opening step, demonstrating that this is the rate-limiting structural transition in the ATPase cycle. Thermodynamic analysis demonstrates that the transition from the open to closed NBP conformation is unfavorable because of a decrease in entropy. The intrinsic flexibility analysis is consistent with conformational entropy playing a role in this transition as the MV.ADP structure is highly flexible compared to the MV.APO structure. Our experimental and modeling studies support the conclusion of a novel post-power-stroke actomyosin.ADP state in which the NBP and actin-binding cleft are closed. The novel state may be important for strain sensitivity as the transition from the closed to open NBP conformation may be altered by lever arm position.     

Cardiac ventricular myosin and slow skeletal myosin exhibit dissimilar chemomechanical properties despite bearing the same myosin heavy chain isoform

The myosin II motors are ATP-powered force-generating machines driving cardiac and muscle contraction. Myosin II heavy chain isoform-beta (β-MyHC) is primarily expressed in the ventricular myocardium and in slow-twitch muscle fibers, such as M. soleus. M. soleus–derived myosin II (SolM-II) is often used as an alternative to the ventricular β-cardiac myosin (βM-II); however, the direct assessment of biochemical and mechanical features of the native myosins is limited. By employing optical trapping, we examined the mechanochemical properties of native myosins isolated from the rabbit heart ventricle and soleus muscles at the single-molecule level. We found purified motors from the two tissue sources, despite expressing the same MyHC isoform, displayed distinct motile and ATPase kinetic properties. We demonstrate βM-II was approximately threefold faster in the actin filament–gliding assay than SolM-II. The maximum actomyosin (AM) detachment rate derived in single-molecule assays was also approximately threefold higher in βM-II, while the power stroke size and stiffness of the “AM rigor” crossbridge for both myosins were comparable. Our analysis revealed a higher AM detachment rate for βM-II, corresponding to the enhanced ADP release rates from the crossbridge, likely responsible for the observed differences in the motility driven by these myosins. Finally, we observed a distinct myosin light chain 1 isoform (MLC1sa) that associates with SolM-II, which might contribute to the observed kinetics differences between βM-II and SolM-II. These results have important implications for the choice of tissue sources and justify prerequisites for the correct myosin heavy and light chains to study cardiomyopathies.     

Myosin essential light chain in health and disease

The essential light chain of myosin (ELC) is known to be important for structural stability of the alpha-helical lever arm domain of the myosin head, but its function in striated muscle contraction is poorly understood. Two ELC isoforms are expressed in fast skeletal muscle, a long isoform and its NH(2)-terminal approximately 40 amino acid shorter counterpart, whereas only the long ELC is observed in the heart. Biochemical and structural studies revealed that the NH(2)-terminus of the long ELC can make direct contacts with actin, but the effects of the ELC on the affinity of myosin for actin, ATPase, force, and the kinetics of force generating myosin cross-bridges are inconclusive. Myosin containing the long ELC has been shown to have slower cross-bridge kinetics than myosin with the short isoform. A difference was also reported among myosins with long isoforms. Increased shortening velocity was observed in atrial compared with ventricular muscle fibers. The common findings suggest that ELC provides the fine tuning of the myosin motor function, which is regulated in an isoform and tissue-dependent manner. The functional importance of the ELC is further implicated by the discovery of ELC mutations associated with Familial Hypertrophic Cardiomyopathy. The pathological phenotypes vary in severity, but more notably, almost all ELC mutations result in sudden cardiac death at a young age. This review summarizes the functional roles of striated muscle ELC in normal healthy muscle and in disease. Transgenic animal models and phenotypic characterization of ELC-mediated remodeling of the heart are also discussed.     

Kinetic and spectroscopic evidence for three actomyosin:ADP states in smooth muscle

Smooth muscle myosin II undergoes an additional movement of the regulatory domain with ADP release that is not seen with fast skeletal muscle myosin II. In this study, we have examined the interactions of smooth muscle myosin subfragment 1 with ADP to see if this additional movement corresponds to an identifiable state change. These studies indicate that for this myosin:ADP, both the catalytic site and the actin-binding site can each assume one of two conformations. Relatively loose coupling between these two binding sites leads to three discrete actin-associated ADP states. Following an initial, weakly bound state, binding of myosin:ADP to actin shifts the equilibrium toward a mixture of two states that each bind actin strongly but differ in the conformation of their catalytic sites. By contrast, fast myosins, including Dictyostelium myosin II, have reciprocal coupling between the actin- and ADP-binding sites, so that either actin or nucleotide, but not both, can be tightly bound. This uncoupling, which generates a second strongly bound actomyosin ADP state in smooth muscle, would prolong the fraction of the ATPase cycle time that this actomyosin spends in a force-generating conformation and may be central to explaining the physiologic differences between this and other myosins.     

Kinetic analysis of the slow skeletal myosin MHC-1 isoform from bovine masseter muscle

Several heavy chain isoforms of class II myosins are found in muscle fibres and show a large variety of different mechanical activities. Fast myosins (myosin heavy chain (MHC)-II-2) contract at higher velocities than slow myosins (MHC-II-1, also known as beta-myosin) and it has been well established that ADP binding to actomyosin is much tighter for MHC-II-1 than for MHC-II-2. Recently, we reported several other differences between MHC-II isoforms 1 and 2 of the rabbit. Isoform II-1 unlike II-2 gave biphasic dissociation of actomyosin by ATP, the ATP-cleavage step was significantly slower for MHC-II-1 and the slow isoforms showed the presence of multiple actomyosin-ADP complexes. These results are in contrast to published data on MHC-II-1 from bovine left ventricle muscle, which was more similar to the fast skeletal isoform. Bovine MHC-II-1 is the predominant isoform expressed in both the ventricular myocardium and slow skeletal muscle fibres such as the masseter and is an important source of reference work for cardiac muscle physiology. This work examines and extends the kinetics of bovine MHC-II-1. We confirm the primary findings from the work on rabbit soleus MHC-II-1. Of significance is that we show that the affinity of ADP for bovine masseter myosin in the absence of actin (represented by the dissociation constant K(D)) is weaker than originally described for bovine cardiac myosin and thus the thermodynamic coupling between ADP and actin binding to myosin is much smaller (K(AD)/K(D) approximately 5 instead of K(AD)/K(D) approximately 50). This may indicate a distinct type of mechanochemical coupling for this group of myosin motors. We also find that the ATP-hydrolysis rate is much slower for bovine MHC-II-1 (19 s(-1)) than reported previously (138 s(-1)). We discuss how this work fits into a broader characterisation of myosin motors from across the myosin family.     

Kinetic mechanism of the fastest motor protein, Chara myosin

Chara corallina class XI myosin is by far the fastest molecular motor. To investigate the molecular mechanism of this fast movement, we performed a kinetic analysis of a recombinant motor domain of Chara myosin. We estimated the time spent in the strongly bound state with actin by measuring rate constants of ADP dissociation from actin.motor domain complex and ATP-induced dissociation of the motor domain from actin. The rate constant of ADP dissociation from acto-motor domain was >2800 s(-1), and the rate constant of ATP-induced dissociation of the motor domain from actin at physiological ATP concentration was 2200 s(-1). From these data, the time spent in the strongly bound state with actin was estimated to be <0.82 ms. This value is the shortest among known values for various myosins and yields the duty ratio of <0.3 with a V(max) value of the actin-activated ATPase activity of 390 s(-1). The addition of the long neck domain of myosin Va to the Chara motor domain largely increased the velocity of the motility without increasing the ATP hydrolysis cycle rate, consistent with the swinging lever model. In addition, this study reveals some striking kinetic features of Chara myosin that are suited for the fast movement: a dramatic acceleration of ADP release by actin (1000-fold) and extremely fast ATP binding rate.     

A kinetic mechanism for the fast movement of Chara myosin

Endoplasmic streaming of characean cells of Nitella or Chara is known to be in the range 30-100 microm/second. The Chara myosin extracted from the cells and fixed onto a glass surface was found to move muscle actin filaments at a velocity of 60 microm/second. This is ten times faster than that of skeletal muscle myosin (myosin II). In this study, the displacement caused by single Chara myosin molecules was measured using optical trapping nanometry. The step size of Chara myosin was approximately 19nm. This step size is longer than that of skeletal muscle myosin but shorter than that of myosin V. The dwell time of the steps was relatively long, and this most likely resulted from two rate-limiting steps, the dissociation of ADP and the binding of ATP. The rate of ADP release from Chara myosin after the completion of the force-generation step was similar to that of myosin V, but was considerably slower than that of skeletal muscle myosin. The 19nm step size and the dwell time obtained could not explain the fast movement. The fast movement could be explained by the load-dependent release of ADP. As the load imposed on the myosin decreased, the rate of ADP release increased. We propose that the interaction of Chara myosin with an actin filament resulted in a negative load being imposed on other myosin molecules interacting with the same actin filament. This resulted in an accelerated release of ADP and the fast sliding movement.     

The myosin cross-bridge cycle and its control by twitchin phosphorylation in catch muscle

The anterior byssus retractor muscle of Mytilus edulis was used to characterize the myosin cross-bridge during catch, a state of tonic force maintenance with a very low rate of energy utilization. Addition of MgATP to permeabilized muscles in high force rigor at pCa > 8 results in a rapid loss of some force followed by a very slow rate of relaxation that is characteristic of catch. The fast component is slowed 3-4-fold in the presence of 1 mM MgADP, but the distribution between the fast and slow (catch) components is not dependent on [MgADP]. Phosphorylation of twitchin results in loss of the catch component. Fewer than 4% of the myosin heads have ADP bound in rigor, and the time course (0.2-10 s) of ADP formation following release of ATP from caged ATP is similar whether or not twitchin is phosphorylated. This suggests that MgATP binding to the cross-bridge and subsequent splitting are independent of twitchin phosphorylation, but detachment occurs only if twitchin is phosphorylated. A similar dependence of detachment on twitchin phosphorylation is seen with AMP-PNP and ATPgammaS. Single turnover experiments on bound ADP suggest an increase in the rate of release of ADP from the cross-bridge when catch is released by phosphorylation of twitchin. Low [Ca(2+)] and unphosphorylated twitchin appear to cause catch by 1) markedly slowing ADP release from attached cross-bridges and 2) preventing detachment following ATP binding to the rigor cross-bridge.     

Nucleotide pocket thermodynamics measured by EPR reveal how energy partitioning relates myosin speed to efficiency

We have used spin-labeled ADP to investigate the dynamics of the nucleotide-binding pocket in a series of myosins, which have a range of velocities. Electron paramagnetic resonance spectroscopy reveals that the pocket is in equilibrium between open and closed conformations. In the absence of actin, the closed conformation is favored. When myosin binds actin, the open conformation becomes more favored, facilitating nucleotide release. We found that faster myosins favor a more closed pocket in the actomyosin•ADP state, with smaller values of ΔH⁰ and ΔS⁰, even though these myosins release ADP at a faster rate. A model involving a partitioning of free energy between work-generating steps prior to rate-limiting ADP release explains both the unexpected correlation between velocity and opening of the pocket and the observation that fast myosins are less efficient than slow myosins.     

Effects of MgATP, MgADP, and Pi on actin movement by smooth muscle myosin.

To test the idea that the in vitro motility assay is a simplified model system for muscle contraction, the MgATP-dependent movement of actin filaments by thiophosphorylated smooth muscle myosin was characterized in the presence of the products MgADP and inorganic phosphate. The dependence of actin filament velocity on MgATP concentration was hyperbolic with a maximum velocity of 0.6 micron/s and an apparent Km = 40 microM (30 degrees C). MgADP competitively inhibited actin movement by MgATP with a Ki = 0.25 mM. Inorganic phosphate did not affect actin filament velocity in the presence of 1 mM MgATP, but competitively inhibited movement in the presence of 50 microM MgATP with a Ki = 9.5 mM. The effects of ADP and Pi on velocity agree with fiber mechanical studies, confirming that the motility assay is an excellent system to investigate the molecular mechanisms of force generation and shortening in smooth muscle. The rate at which rigor cross-bridges can be recruited to move actin filaments was observed by initiating cross-bridge cycling from rigor by flash photolysis of caged MgATP. Following the flash, which results in a rapid increase in MgATP concentration, actin filaments experienced a MgATP-dependent delay prior to achieving steady state velocity. The delay at low MgATP concentrations was interpreted as evidence that motion generating cross-bridges are slowed by a load due to a transiently high percentage of rigor cross-bridges immediately following MgATP release.     

In vitro actin filament sliding velocities produced by mixtures of different types of myosin.

Using in vitro motility assays, we examined the sliding velocity of actin filaments generated by pairwise mixings of six different types of actively cycling myosins. In isolation, the six myosins translocated actin filaments at differing velocities. We found that only small proportions of a more slowly translating myosin type could significantly inhibit the sliding velocity generated by a myosin type that translocated filaments rapidly. In other experiments, the addition of noncycling, unphosphorylated smooth and nonmuscle myosin to actively translating myosin also inhibited the rapid sliding velocity, but to a significantly reduced extent. The data were analyzed in terms of a model derived from the original working cross-bridge model of A.F. Huxley. We found that the inhibition of rapidly translating myosins by slowly cycling was primarily dependent upon only a single parameter, the cross-bridge detachment rate at the end of the working powerstroke. In contrast, the inhibition induced by the presence of noncycling, unphosphorylated myosins required a change in another parameter, the transition rate from the weakly attached actomyosin state to the strongly attached state at the beginning of the cross-bridge power stroke.