Thirtyfold multiplex genotyping of the p53 gene using solid phase capturable dideoxynucleotides and mass spectrometry

A mass spectrometry (MS) based multiplex genotyping method using solid phase capturable (SPC) dideoxynucleotides and single base extension (SBE), named the SPC-SBE, has been developed for mutation detection. We report here the simultaneous genotyping of 30 potential point mutation sites in exons 5, 7, and 8 of the human p53 gene in one tube using the SPC-SBE method. The 30 mutation sites, including the most frequently mutated p53 codons, were chosen to explore the high multiplexing scope of the SPC-SBE method. Thirty primers specific to each potential mutation site were designed to yield SBE products with sufficient mass differences. This was achieved by tuning the mass of some primers using modified nucleotides. Genomic DNA was amplified by multiplex PCR to produce amplicons of the three p53 exons. The 30 primers were combined with the PCR products and biotinylated dideoxynucleotides for SBE to generate 3'-biotinylated extension DNA products. These products were then captured by streptavidin-coated magnetic beads, while the unextended primers and other components in the reaction were washed away. The pure extension DNA products were subsequently released from the solid phase and analyzed with MS. We simultaneously genotyped 30 potential mutation sites in the p53 gene from Wilms' tumor, head and neck tumor, and colorectal tumor. Both homozygous and heterozygous genotypes were accurately determined with digital resolution. This is the highest level of multiplex genotyping reported thus far using MS, indicating that the approach might be applicable to screening a repertoire of genotypes in candidate genes as potential disease markers.     

Solid phase capturable dideoxynucleotides for multiplex genotyping using mass spectrometry

We report an approach using solid phase capturable biotinylated dideoxynucleotides (biotin-ddNTPs) in single base extension for multiplex genotyping by mass spectrometry (MS). In this method, oligonucleotide primers that have different molecular weights and that are specific to the polymorphic sites in the DNA template are extended with biotin-ddNTPs by DNA polymerase to generate 3′-biotinylated DNA products. These products are then captured by streptavidin-coated solid phase magnetic beads, while the unextended primers and other components in the reaction are washed away. The pure extension DNA products are subsequently released from the solid phase and analyzed by matrix-assisted laser desorption/ionization time-of-flight MS. The mass of the extension products is determined using a stable oligonucleotide as a common internal mass standard. Since only the pure extension DNA products are introduced to the MS for analysis, the resulting mass spectrum is free of non-extended primer peaks and their associated dimers, which increases the accuracy and scope of multiplexing in single nucleotide polymorphism (SNP) analysis. The solid phase purification approach also facilitates desalting of the captured oligonucleotides, which is essential for accurate mass measurement by MS. We selected four biotin-ddNTPs with distinct molecular weights to generate extension products that have a 2-fold increase in mass difference compared to that with conventional ddNTPs. This increase in mass difference provides improved resolution and accuracy in detecting heterozygotes in the mass spectrum. Using this method, we simultaneously distinguished six nucleotide variations on synthetic DNA templates mimicking mutations in the p53 gene and two disease-associated SNPs in the human hereditary hemochromatosis gene.     

Microbead device for isolating biotinylated oligonucleotides for use in mass spectrometric analysis

We describe a prototypical device for isolating biotinylated oligonucleotides for use in mass spectrometric analysis. It consists of monomeric avidin-coated microbeads trapped in a pipette tip and has been used for genotyping single nucleotide polymorphisms (SNPs) with the previously developed solid phase capture-single base extension (SPC-SBE) method. The device reduces processing time for genotyping by SPC-SBE and allows direct spotting of sample for rapid analysis by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). In addition, it allows simultaneous processing of multiple samples and can be reused after regeneration of beads with no carryover effects. These results indicate that the microbead device is a low-cost tool that enhances sample cleanup prior to MS for SNP genotyping.     

Single nucleotide polymorphism detection by combinatorial fluorescence energy transfer tags and biotinylated dideoxynucleotides

Combinatorial fluorescence energy transfer (CFET) tags, constructed by exploiting energy transfer and combinatorial synthesis, allow multiple biological targets to be analyzed simultaneously. We here describe a multiplex single nucleotide polymorphism (SNP) assay based on single base extension (SBE) using CFET tags and biotinylated dideoxynucleotides (biotin-ddNTPs). A library of CFET-labeled oligonucleotide primers was mixed with biotin-ddNTPs, DNA polymerase and the DNA templates containing the SNPs in a single tube. The nucleotide at the 3′-end of each CFET-labeled oligonucleotide primer was complementary to a particular SNP in the template. Only the CFET-labeled primer that is fully complementary to the DNA template was extended by DNA polymerase with a biotin-ddNTP. We isolated the DNA extension fragments that carry a biotin at the 3′-end by capture with streptavidin-coated magnetic beads, while the unextended primers were eliminated. The biotinylated fluorescent DNA fragments were subsequently analyzed in a multicolor fluorescence electrophoresis system. The distinct fluorescence signature and electrophoretic mobility of each DNA extension product in the electropherogram coded the SNPs without the use of a sizing standard. We simultaneously distinguished six nucleotide variations in synthetic DNA templates and a PCR product from the retinoblastoma tumor suppressor gene. The use of CFET-labeled primers and biotin-ddNTPs coupled with the specificity of DNA polymerase in SBE offered a multiplex method for detecting SNPs.     

Mitochondrial single nucleotide polymorphism genotyping by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry using cleavable biotinylated dideoxynucleotides

Characterization of mitochondrial DNA (mtDNA) single nucleotide polymorphisms (SNPs) and mutations is crucial for disease diagnosis, which requires accurate and sensitive detection methods and quantification due to mitochondrial heteroplasmy. We report here the characterization of mutations for myoclonic epilepsy with ragged red fibers syndrome using chemically cleavable biotinylated dideoxynucleotides and a mass spectrometry (MS)-based solid phase capture (SPC) single base extension (SBE) assay. The method effectively eliminates unextended primers and primer dimers, and the presence of cleavable linkers between the base and biotin allows efficient desalting and release of the DNA products from solid phase for MS analysis. This approach is capable of high multiplexing, and the use of different length linkers for each of the purines and each of the pyrimidines permits better discrimination of the four bases by MS. Both homoplasmic and heteroplasmic genotypes were accurately determined on different mtDNA samples. The specificity of the method for mtDNA detection was validated by using mitochondrial DNA-negative cells. The sensitivity of the approach permitted detection of less than 5% mtDNA heteroplasmy levels. This indicates that the SPC-SBE approach based on chemically cleavable biotinylated dideoxynucleotides and MS enables rapid, accurate, and sensitive genotyping of mtDNA and has broad applications for genetic analysis.     

MagSNiPer: a new single nucleotide polymorphism typing method based on single base extension, magnetic separation, and chemiluminescence

We have developed a new method for typing single nucleotide polymorphisms (SNPs), MagSNiPer, based on single base extension, magnetic separation, and chemiluminescence. Single base nucleotide extension reaction is performed with a biotinylated primer whose 3' terminus is contiguous to the SNP site with a tag-labeled ddNTP. Then the primers are captured by magnetic-coated beads with streptavidin, and unincorporated labeled ddNTP is removed by magnetic separation. The magnetic beads are incubated with anti-tag antibody conjugated with alkaline phosphatase. After the removal of excess conjugates by magnetic separation, SNP typing is performed by measuring chemiluminescence. The incorporation of labeled ddNTP is monitored by chemiluminescence induced by alkaline phosphatase. MagSNiPer is a simple and robust SNP typing method with a wide dynamic range and high sensitivity. Using MagSNiPer, we could perform SNP typing with as little as 10(-17) mol of template DNA.     

A simple procedure for the analysis of single nucleotide polymorphisms facilitates map-based cloning in Arabidopsis

We developed a modified allele-specific PCR procedure for assaying single nucleotide polymorphisms (SNPs) and used the procedure (called SNAP for single-nucleotide amplified polymorphisms) to generate 62 Arabidopsis mapping markers. SNAP primers contain a single base pair mismatch within three nucleotides from the 3' end of one allele (the specific allele) and in addition have a 3' mismatch with the nonspecific allele. A computer program called SNAPER was used to facilitate the design of primers that generate at least a 1,000-fold difference in the quantity of the amplification products from the specific and nonspecific SNP alleles. Because SNAP markers can be readily assayed by electrophoresis on standard agarose gels and because a public database of over 25,000 SNPs is available between the Arabidopsis Columbia and Landsberg erecta ecotypes, the SNAP method greatly facilitates the map-based cloning of Arabidopsis genes defined by a mutant phenotype.     

Single nucleotide polymorphism genotyping using allele-specific PCR and fluorescence melting curves

We present a PCR method for identification of single nucleotide polymorphisms (SNPs), using allele-specific primers designed for selective amplification of each allele. Matching the SNP at the 3' end of the forward or reverse primer, and additionally incorporating a 3' mismatch to prevent amplification of the incorrect allele, results in selectivity of the allele-specific primers. DNA melting analysis with fluorescent SYBR Green affords detection of the PCR products. By incorporating a GC-rich sequence into one of the two allele-specific primers to increase the melting temperature, both alleles can be measured simultaneously at their respective melting temperatures. Applying the DNA melting analysis to SNPs in ApoE and ABCA1 yielded results identical to those obtained with other genotyping methods. This provides a cost-effective, high-throughput method for amplification and scoring of SNPs.     

Genotools SNP manager: a new software for automated high-throughput MALDI-TOF mass spectrometry SNP genotyping

Analysis of single nucleotide polymorphisms (SNPs) is a rapidly growing field of research that provides insights into the most common type of differences between individual genomes. The resulting information has a strong impact in the fields of pharmacogenomics, drug development, forensic medicine, and diagnostics of specific disease markers. The technique of matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF MS) has been shown to be a highly suitable tool for the analysis of DNA. It supplies a very versatile method for addressing a high-throughput SNP genotyping approach. Here, we present the Bruker genotools SNP MANAGER, a new software tool suitable for highly automated MALDI-TOF MS SNP genotyping. The genotools SNP MANAGER administers the sample preparation data, calculates masses of allele-specific primer extension products, performs genotyping analysis, and displays the results. In the current study, we have used the genotools SNP MANAGER to perform an automated duplex SNP analysis of two biallelic markers from the promoter of the gene encoding the inflammatory mediator interleukin-6.     

SOP3: a web-based tool for selection of oligonucleotide primers for single nucleotide polymorphism analysis by Pyrosequencing

SOP3 is a web-based software tool for designing oligonucleotide primers for use in the analysis of single nucleotide polymorphisms (SNPs). Accessible via the Internet, the application is optimized for developing the PCR and sequencing primers that are necessary for Pyrosequencing. The application accepts as input gene name, SNP reference sequence number, or chromosomal nucleotide location. Output can be parsed by gene name, SNP reference number, heterozygosity value, location, chromosome, or function. The location of an individual polymorphism, such as an intron, exon, or 5' or 3' untranslated region is indicated, as are whether nucleotide changes in an exon are associated with a change in an amino acid sequence. SOP3 presents for each entry a set of forward and biotinylated reverse PCR primers as well as a sequencing primer for use during the analysis of SNPs by Pyrosequencing. Theoretical pyrograms for each allele are calculated and presented graphically. The method has been tested in the development of Pyrosequencing assays for determining SNPs and for deletion/insertion polymorphisms in the human genome. Of the SOP3-designed primer sets that were tested, a large majority of the primer sets have successfully produced PCR products and Pyrosequencing data.     

Multiplex automated primer extension analysis: simultaneous genotyping of several polymorphisms.

Accurate and fast genotyping of single nucleotide polymorphisms (SNPs) is of significant scientific importance for linkage and association studies. We report here an automated fluorescent method we call multiplex automated primer extension analysis (MAPA) that can accurately genotype multiple known SNPs simultaneously. This is achieved by substantially improving a commercially available protocol (SNaPshot). This protocol relies on the extension of a primer that ends one nucleotide 5'of a given SNP with fluorescent dideoxy-NTPs (minisequencing), followed by analysis on an ABI PRisMS 377 Semi-Automated DNA Sequencer Our modification works by multiplexing the initial reaction that produces the DNA template for primer extension and/or multiplexing several primers (corresponding to several SNPs) in the same primer extension reaction. Then, we run each multiplexed reaction on a single gel lane. We demonstrate that MAPA can be used to genotype up to four SNPs simultaneously, even in compound heterozygote samples, with complete accuracy (based on concordance with sequencing results). We also show that primer design, unlike the DNA template purification method, can significantly affect genotyping accuracy, and we suggest useful guidelines for quick optimization.     

A multiplexing single nucleotide polymorphism typing method based on restriction-enzyme-mediated single-base extension and capillary electrophoresis

Millions of single nucleotide polymorphisms (SNPs) have been identified in recent years. This provides a great opportunity for large-scale association and population studies. However, many high-throughput SNP typing techniques require expensive and dedicated instruments, which render them out of reach for many laboratories. To meet the need of these laboratories, we here report a method that uses widely available DNA sequencer for SNP typing. This method uses a type II restriction enzyme to create extendable ends at target polymorphic sites and uses single-base extension (SBE) to discriminate alleles. In this design, a restriction site is engineered in one of the two polymerase chain reaction (PCR) primers so that the restriction endonuclease cuts immediately upstream of the targeted SNP site. The digestion of the PCR products generates a 5'-overhang structure at the targeted polymorphic site. This 5'-overhang structure then serves as a template for SBE reaction to generate allele-specific products using fluorescent dye-terminator nucleotides. Following the SBE, the allele-specific products with different sizes can be resolved by DNA sequencers. Through primer design, we can create a series of PCR products that vary in size and contain only one restriction enzyme recognition site. This allows us to load many PCR products in a single capillary/lane. This method, restriction-enzyme-mediated single-base extension, is demonstrated by typing multiple SNPs simultaneously for 44 DNA samples. By multiplexing PCR and pooling multiplexed reactions together, this method has the potential to score 50-100 SNPs/capillary/run if the sizes of PCR products are arranged at every 5-10 bases from 100 to 600 base range.     

Single-nucleotide polymorphisms: analysis by mass spectrometry

Matrix-assisted laser desorption-ionization (MALDI) mass spectrometry has evolved as a powerful method for analyzing nucleic acids. Here we provide protocols for genotyping single-nucleotide polymorphisms (SNPs) by MALDI based on PCR and primer extension to generate allele-specific products. Furthermore, we present three different approaches for sample preparation of primer-extension products before MALDI analysis and discuss their potential areas of application. The first approach, the 'GOOD' assay, is a purification-free procedure that uses DNA-modification chemistry, including alkylation of phosphorothioate linkages in the extension primers. The other two approaches use either solid-phase extraction or microarray purification for the purification of primer-extension products. Depending on the reaction steps of the various approaches, the protocols take about 6-8 hours.     

A novel MALDI-TOF based methodology for genotyping single nucleotide polymorphisms

A new MALDI-TOF based detection assay was developed for analysis of single nucleotide polymorphisms (SNPs). It is a significant modification on the classic three-step minisequencing method, which includes a polymerase chain reaction (PCR), removal of excess nucleotides and primers, followed by primer extension in the presence of dideoxynucleotides using modified thermostable DNA polymerase. The key feature of this novel assay is reliance upon deoxynucleotide mixes, lacking one of the nucleotides at the polymorphic position. During primer extension in the presence of depleted nucleotide mixes, standard thermostable DNA polymerases dissociate from the template at positions requiring a depleted nucleotide; this principal was harnessed to create a genotyping assay. The assay design requires a primer- extension primer having its 3'-end one nucleotide upstream from the interrogated site. The assay further utilizes the same DNA polymerase in both PCR and the primer extension step. This not only simplifies the assay but also greatly reduces the cost per genotype compared to minisequencing methodology. We demonstrate accurate genotyping using this methodology for two SNPs run in both singleplex and duplex reactions. We term this assay nucleotide depletion genotyping (NUDGE). Nucleotide depletion genotyping could be extended to other genotyping assays based on primer extension such as detection by gel or capillary electrophoresis.     

Rapid identification of single nucleotide polymorphisms by fluorescence-based capillary electrophoresis

We describe the application of two different fluorescence-based techniques (ddNTP primer extension and single-strand conformation polymorphism (SSCP)) to the detection of single nucleotide polymorphisms (SNPs) by capillary electrophoresis. The ddNTP primer extension technique is based on the extension, in the presence of fluorescence-labeled dideoxy nucleotides (ddNTP, terminators), of an unlabeled oligonucleotide primer that binds to the complementary template immediately adjacent to the mutant nucleotide position. Given that there are no unlabeled dNTPs, a single ddNTP is added to its 3' end, resulting in a fluorescence-labeled primer extension product which is readily separated by capillary electrophoresis. On the other hand, the non-radioisotopic version of SSCP established in this study uses fluorescent dye to label the PCR products, which are also analyzed by capillary electrophoresis. These procedures were used to identify a well-defined SNP in exon 7 of the human p53 gene in DNA samples isolated from two human cell lines (CEM and THP-1 cells). The results revealed a heterozygous single-base transition (G to A) at nucleotide position 14071 in CEM cells, proving that both fluorescence-based ddNTP primer extension and SSCP are rapid, simple, robust, specific and with no ambiguity in interpretation for the detection of well-defined SNPs.     

Design and synthesis of a photocleavable biotinylated nucleotide for DNA analysis by mass spectrometry

We report here the design, synthesis and evaluation of a novel photocleavable (PC) biotinylated nucleotide analog, dUTP-PC-Biotin, for DNA polymerase extension reaction to isolate DNA products for mass spectrometry (MS) analysis. This nucleotide analog has a biotin moiety attached to the 5-position of 2′-deoxyribouridine 5′-triphosphate via a photocleavable 2-nitrobenzyl linker. We have demonstrated that dUTP-PC-Biotin can be faithfully incorporated by the DNA polymerase Thermo Sequenase into the growing DNA strand in a DNA polymerase extension reaction and that its incorporation does not hinder the addition of the subsequent nucleotide. Therefore, the DNA extension fragments generated by using the dUTP-PC-Biotin can be efficiently isolated by a streptavidin-coated surface and recovered by near-UV light irradiation at room temperature in mild condition for further analysis without using any chemicals or heat. Single and multiple primer extension reactions were performed using the dUTP-PC-Biotin to generate DNA products for MALDI-TOF MS analysis. Such nucleotide analogs that carry a biotin and a photocleavable linker will allow the isolation and purification of DNA products under mild conditions for MS-based genetic analysis by DNA sequencing or multiplex single nucleotide polymorphism (SNP) detection. Furthermore, these nucleotide analogs should also be useful in isolating DNA–protein complexes under non-denaturing conditions.     

Direct molecular haplotyping by melting curve analysis of hybridization probes: beta 2-adrenergic receptor haplotypes as an example

Direct determination of the association of multiple genetic polymorphisms, or haplotyping, in individual samples is challenging because of chromosome diploidy. Here, we describe the ability of hybridization probes, commonly used as genotyping tools, to establish single nucleotide polymorphism (SNP) haplotypes in a single step. Three haplotypes found in the beta 2-adrenergic receptor (β2AR) gene and characterized by three different SNPs combinations are presented as examples. Each combination of SNPs has a unique stability, recorded by its melting temperature, even when intervening sequences from the template must loop out during probe hybridization. In the course of this study, two haplotypes in β2AR not described previously were discovered. This approach provides a tool for molecular haplotyping that should prove useful in clinical molecular genetics diagnostics and pharmacogenetic research where methods for direct haplotyping are needed.     

应用变性高效液相色谱技术建立胸苷酸合成酶基因多态检测平台

TS基因5′非翻译区(5′ untranslation region, 5′UTR)增强子区域(TS enhancer region, TSER)存在28 bp的2次(2R)、3次(3R)的串联重复多态, 在3R等位基因第二次重复中还存在一个G→C的单核苷酸多态性(single nucleotide polymorphisms, SNPs), 同时在3′非翻译区(3′ untranslation region, 3′ UTR)存在6个碱基片段缺失/插入多态。这些多态形式的存在影响了TS基因mRNA的稳定和翻译效率, 并可导致不同TS基因型肿瘤患者对以5-fuorouracil (5-FU)为基础的化疗疗效产生差异。为提高TS基因型临床检测的效率和准确性, 方便、快捷、准确和自动化区分各种纯合及杂合基因型, 设计多重PCR反应, 同时扩增TS基因5′ 和3′ 非翻译区多态所处片段。利用DHPLC技术建立TS基因多态性检测平台, 在非变性条件下, 通过优化DHPLC 洗脱梯度, 同时检测5′ TSER区的串联重复多态和3′ UTR片段长度多态; 在变性条件下, 检测5′ TSER区单核苷酸多态。同时采用PCR-RFLP和DNA 测序方法, 验证DHPLC分析结果。     

Site-directed mutagenesis by overlap extension using the polymerase chain reaction

Overlap extension represents a new approach to genetic engineering. Complementary oligodeoxyribonucleotide (oligo) primers and the polymerase chain reaction are used to generate two DNA fragments having overlapping ends. These fragments are combined in a subsequent 'fusion' reaction in which the overlapping ends anneal, allowing the 3' overlap of each strand to serve as a primer for the 3' extension of the complementary strand. The resulting fusion product is amplified further by PCR. Specific alterations in the nucleotide (nt) sequence can be introduced by incorporating nucleotide changes into the overlapping oligo primers. Using this technique of site-directed mutagenesis, three variants of a mouse major histocompatibility complex class-I gene have been generated, cloned and analyzed. Screening of mutant clones revealed at least a 98% efficiency of mutagenesis. All clones sequenced contained the desired mutations, and a low frequency of random substitution estimated to occur at approx. 1 in 4000 nt was detected. This method represents a significant improvement over standard methods of site-directed mutagenesis because it is much faster, simpler and approaches 100% efficiency in the generation of mutant product.     

Allele-specific long-range PCR/sequencing method for allelic assignment of multiple single nucleotide polymorphisms

We report an allele-specific sequencing method using allele-specific long-range polymerase chain reaction (PCR) to determine if multiple (specifically, more than three) single nucleotide polymorphisms (SNPs) are located on the same allele. We sequenced the glucocorticoid receptor (GR) gene as a model and detected four nucleotide changes, including two novel variations, in intron 4 and exons 6, 8, and 9 alpha in four of the investigated cell lines. The terminal SNPs (intron 4 and exon 9 alpha) were separated by 19 kb. Following SNP identification, the first round PCR allele-specific primers are designed at the both distal SNP sites (intron 4 and exon 9 alpha), placing the SNP positions at the primer 3'-end. Using these first round PCR products as template, the second round PCR was performed to separately amplify exons 6 and 8. These second round PCR products were subsequently sequenced. The sequencing results showed that the four SNPs were located on the same allele, i.e., forming a haplotype. This allele-specific long-range PCR/sequencing (ALP/S) method is rapid and applicable to the allelic assignment for more than three SNPs.