Effects of cysteine to serine substitutions in the two inter-chain disulfide bonds of insulin

Using site-directed mutagenesis we deleted the two inter-chain disulfide bonds of insulin, separately or both, by substitution of the cysteine residues with serine. Deletion of A20-B19 or both of the two inter-chain disulfide bonds resulted in the complete loss of secretion of the mutant single-chain porcine insulin precursor (PIP) from Saccharomyces cerevisiae cells. Removal of the A7-B7 disulfide bond resulted in a large reduction of secretion, but we could obtain the mutant for analysis of its biological and some physico-chemical properties. The A7-B7 disulfide bond deleted insulin mutant retained only 0.1% receptor-binding activity compared with porcine insulin, and its in vivo biological potency measured by mouse convulsion assay was also very low. We also studied some physico-chemical properties of the mutant using circular dichroism, native polyacrylamide gel electrophoresis and reversed-phase HPLC, which revealed some structural changes of the mutant peptides compared to native insulin. The present study shows that the two inter-chain disulfide bonds are important for efficient in vivo folding/secretion of PIP from yeast, especially the A20-B19 disulfide bond, and that the A7-B7 disulfide bond is crucial for maintaining the native conformation and biological activity of insulin.     

Role of disulfide bonds in the structure and activity of human insulin

Insulin contains two inter-chain disulfide bonds between the A and B chains (A7-B7 and A20-B19), and one intra-chain linkage in the A chain (A6-A11). To investigate the role of each disulfide bond in the structure, function and stability of the molecule, three des mutants of human insulin, each lacking one of the three disulfide bonds, were prepared by enzymatic conversion of refolded mini-proinsulins. Structural and biological studies of the three des mutants revealed that all three disulfide bonds are essential for the receptor binding activity of insulin, whereas the different disulfide bonds make different contributions to the overall structure of insulin. Deletion of the A20-B19 disulfide bond had the most substantial influence on the structure as indicated by loss of ordered secondary structure, increased susceptibility to proteolysis, and markedly reduced compactness. Deletion of the A6-A11 disulfide bond caused the least perturbation to the structure. In addition, different refolding efficiencies between the three des mutants suggest that the disulfide bonds are formed sequentially in the order A20-B19, A7-B7 and A6-A11 in the folding pathway of proinsulin.     

Dissecting the role of disulfide bonds on the amyloid formation of insulin

Disulfide bonds play a critical role in the stability and folding of proteins. Here, we used insulin as a model system, to investigate the role of its individual disulfide bond during the amyloid formation of insulin. Tris(2-carboxyethyl)phosphine (TCEP) was applied to reduce two of the three disulfide bonds in porcine insulin and the reduced disulfide bonds were then alkylated by iodoacetamide. Three disulfide bond-modified insulin analogs, INS-2 (lack of A6-A11), INS-3 (lack of A7-B7) and INS-6 (lack of both A6-A11 and A7-B7), were obtained. Far-UV circular dichroism (CD) spectroscopy results indicated that the secondary structure of INS-2 was the closest to insulin under neutral conditions, followed by INS-3 and INS-6, whereas in an acidic solution all analogs were essentially unfolded. To test how these modifications affect the amyloidogenicity of insulin, thioflavin-T (ThT) fluorescence and transmission electronic microscopy (TEM) were performed. Our results showed that all analogs were more prone to aggregation than insulin, with the order of aggregation rates being INS-6>INS-3>INS-2. Cross-linking of unmodified proteins (PICUP) assay results showed that analogs without A6-A11 (INS-2 and INS-6) have a higher potential for oligomerization than insulin and INS-3, which is accompanied with a higher cytotoxicity as the hemolytic assays of human erythrocytes suggested. The results indicated that breakage of A7-B7 induced more unfolding of the insulin structure and a higher amyloidogenicity than breakage of A6-A11, but breakage of A6-A11 caused a significant cytotoxicity increase and a higher potency to form high order toxic oligomers.     

Role of the phenylalanine B25 side chain in directing insulin interaction with its receptor. Steric and conformational effects

To gain an understanding of the causes of decreased biological activity in insulins bearing amino acid substitutions at position B25 and the importance of the PheB25 side chain in directing hormone-receptor interactions, we have prepared a variety of insulin analogs and have studied both their interactions with isolated canine hepatocytes and their abilities to stimulate glucose oxidation by isolated rat adipocytes. The semisynthetic analogs fall into three structural classes: (a) analogs in which the COOH-terminal 5, 6, or 7 residues of the insulin B-chain have been deleted, but in which the COOH-terminal residue of the B-chain has been derivatized by alpha-carboxamidation; (b) analogs in which PheB25 has been replaced by unnatural aromatic or natural L-amino acids; and (c) analogs in which the COOH-terminal 5 residues of the insulin B-chain have been deleted and in which residue B25 has been replaced by selected alpha-carboxamidated amino acids. Our results showed that (a) insulin residues B26-B30 can be deleted without decrease in biological potency, whereas deletion of residues B25-B30 and B24-B30 causes a marked and cumulative decrease in potency; (b) replacement of PheB25 in insulin by Leu or Ser results in analogs with biological potency even less than that observed when residues B25-B30 are deleted; (c) the side chain bulk of naphthyl(1)-alanine or naphthyl(2)-alanine at position B25 is well tolerated during insulin interactions with receptor, whereas that of homophenylalanine is not; and (d) the decreased biological potency attending substitution of insulin PheB25 by Ala, Ser, Leu, or homophenylalanine is reversed, in part or in total, by deletion of COOH-terminal residues B26-B30. Additional experiments showed that the rate of dissociation of receptor-bound 125I-labeled insulin from isolated hepatocytes is enhanced by incubating cells with insulin or [naphthyl(2)-alanineB25]insulin, but not with analogs in which PheB25 is replaced by serine, leucine, or homophenylalanine; deletion of residues B26-B30, however, results in analogs that enhance the rate of dissociation of receptor-bound insulin in all cases studied. We conclude that (a) steric hindrance involving the COOH-terminal domain of the B chain plays a major role in directing the interaction of insulin with its receptor; (b) the initial negative effect of this domain is reversed upon the filling of a site reflecting interaction of the receptor and the beta-aromatic ring of the PheB25 side chain.(ABSTRACT TRUNCATED AT 400 WORDS)     

Contribution of disulfide bonds to the conformational stability and catalytic activity of ribonuclease A.

Disulfide bonds between the side chains of cysteine residues are the only common crosslinks in proteins. Bovine pancreatic ribonuclease A (RNase A) is a 124-residue enzyme that contains four interweaving disulfide bonds (Cys26-Cys84, Cys40-Cys95, Cys58-Cys110, and Cys65-Cys72) and catalyzes the cleavage of RNA. The contribution of each disulfide bond to the conformational stability and catalytic activity of RNase A has been determined by using variants in which each cystine is replaced independently with a pair of alanine residues. Thermal unfolding experiments monitored by ultraviolet spectroscopy and differential scanning calorimetry reveal that wild-type RNase A and each disulfide variant unfold in a two-state process and that each disulfide bond contributes substantially to conformational stability. The two terminal disulfide bonds in the amino-acid sequence (Cys26-Cys84 and Cys58-Cys110) enhance stability more than do the two embedded ones (Cys40-Cys95 and Cys65-Cys72). Removing either one of the terminal disulfide bonds liberates a similar number of residues and has a similar effect on conformational stability, decreasing the midpoint of the thermal transition by almost 40 degrees C. The disulfide variants catalyze the cleavage of poly(cytidylic acid) with values of kcat/Km that are 2- to 40-fold less than that of wild-type RNase A. The two embedded disulfide bonds, which are least important to conformational stability, are most important to catalytic activity. These embedded disulfide bonds likely contribute to the proper alignment of residues (such as Lys41 and Lys66) that are necessary for efficient catalysis of RNA cleavage.     

Further studies on the structural requirements for mast cell degranulating (MCD) peptide-mediated histamine release

Mast cell degranulating (MCD) peptide was modified in its two disulfide bridges and in the two arginine residues in order to measure the ability of these analogs to induce histamine release from mast cells in vitro. Analogs prepared were [Ala^3,15]MCD, [Ala^5,19]MCD, [Orn¹⁶]MCD, and [Orn^7,16]MCD. Their histamine-releasing activity was determined spectrofluorometrically with peritoneal mast cells. The monocyclic analogs in which the cysteine residues were replaced pairwise with alanine residues showed three-to ten-fold diminished histamine-releasing activity respectively, compared with the parent MCD peptide. Substantial increases in activity were observed where arginine residues were replaced by ornithines. The ornithine-mono substituted analog showed an almost six-fold increase and the ornithine-doubly substituted analog three-fold increase in histamine-releasing activity compared with the parent MCD peptide. The structural changes associated with these activities were followed by circular dichroism (CD) spectroscopy. Changes in the shape and ellipticity of the CD spectra reflected a role for the disulfide bonds and the two arginine residues in the overall conformation and biological activity of the molecule.     

Structure-function relationships for the IL-2 receptor system. V. Structure-activity analysis of modified and truncated forms of the Tac receptor protein: site-specific mutagenesis of cysteine residues

IL-2R on activated lymphocytes contain the Tac protein. As part of an effort to characterize this molecule, we examined the structure-activity relationship for each of its 12 Cys residues. A preliminary map of intramolecular disulfide bonding was derived by analysis of cystine-linked enzymatic fragments of the Tac protein. The results indicated that disulfide bonds linked Cys-3 with Cys-147, Cys-131 with Cys-163, and Cys-28,30 with Cys-59,61. The contribution of the Cys residues to an active protein conformation was tested by site-specific mutagenesis, followed by expression of the modified molecules in murine L cells. The results indicated that Cys-192 and -225 could be replaced without affecting ligand binding. In contrast, modification of any of the other 10 Cys residues, either singly or in combinations corresponding to the predicted disulfide bonds, greatly reduced the ability of the corresponding protein to bind IL-2 or either of two mAb (anti-Tac and 7G7/B6) which recognize the Tac protein. Each of the latter mutations also interfered with the molecule's post-translational modification and cell-surface expression. Consistent with these findings, transfection of the L cells with vectors containing truncated Tac cDNA inserts resulted in secretion of Tac fragments capable of ligand binding when the polypeptide chains terminated after Cys-163 (the 10th Cys residue in the full length molecule), but resulted in inactive fragments of Tac which were poorly secreted when they terminated before Cys-163. These findings emphasize the remarkable sensitivity of the active conformation of the Tac molecule to each of the postulated intramolecular disulfide bonds.     

The folding nucleus of the insulin superfamily: a flexible peptide model foreshadows the native state

Oxidative folding of insulin-like growth factor I (IGF-I) and single-chain insulin analogs proceeds via one- and two-disulfide intermediates. A predominant one-disulfide intermediate in each case contains the canonical A20-B19 disulfide bridge (cystines 18-61 in IGF-I and 19-85 in human proinsulin). Here, we describe a disulfide-linked peptide model of this on-pathway intermediate. One peptide fragment (19 amino acids) spans IGF-I residues 7-25 (canonical positions B8-B26 in the insulin superfamily); the other (18 amino acids) spans IGF-I residues 53-70 (positions A12-A21 and D1-D8). Containing only half of the IGF-I sequence, the disulfide-linked polypeptide (designated IGF-p) is not well ordered. Nascent helical elements corresponding to native alpha-helices are nonetheless observed at 4 degrees C. Furthermore, (13)C-edited nuclear Overhauser effects establish transient formation of a native-like partial core; no non-native nuclear Overhauser effects are observed. Together, these observations suggest that early events in the folding of insulin-related polypeptides are nucleated by a native-like molten subdomain containing Cys(A20) and Cys(B19). We propose that nascent interactions within this subdomain orient the A20 and B19 thiolates for disulfide bond formation and stabilize the one-disulfide intermediate once formed. Substitutions in the corresponding region of insulin are associated with inefficient chain combination and impaired biosynthetic expression. The intrinsic conformational propensities of a flexible disulfide-linked peptide thus define a folding nucleus, foreshadowing the structure of the native state.     

Solution structure and activity of the synthetic four-disulfide bond Mediterranean mussel defensin (MGD-1)

MGD-1 is a 39-residue defensin-like peptide isolated from the edible Mediterranean mussel, Mytilus galloprovincialis. This peptide is characterized by the presence of four disulfide bonds. We report here its solid-phase synthesis and an easy way to improve the yield of the four native disulfide bonds. Synthetic and native MGD-1 display similar antibacterial activity, suggesting that the hydroxylation of Trp28 observed in native MGD-1 is not involved in the antimicrobial effect. The three-dimensional solution structure of MGD-1 has been established using (1)H NMR and mainly consists of a helical part (Asn7-Ser16) and two antiparallel beta-strands (Arg20-Cys25 and Cys33-Arg37), together giving rise to the common cystine-stabilized alpha-beta motif frequently observed in scorpion toxins. In MGD-1, the cystine-stabilized alpha-beta motif is stabilized by four disulfide bonds (Cys4-Cys25, Cys10-Cys33, Cys14-Cys35, and Cys21-Cys38), instead of by the three disulfide bonds commonly found in arthropod defensins. Except for the Cys21-Cys38 disulfide bond which is solvent-exposed, the three others belong to the particularly hydrophobic core of the highly constrained structure. Moreover, the C4-P5 amide bond in the cis conformation characterizes the MGD-1 structure. MGD-1 and insect defensin A possess similar bactericidal anti-Gram-positive activity, suggesting that the fourth disulfide bond of MGD-1 is not essential for the biological activity. In agreement with the general features of antibacterial peptides, the MGD-1 and defensin A structures display a typical distribution of positively charged and hydrophobic side chains. The positively charged residues of MGD-1 are located in three clusters. For these two defensin peptides isolated from insects and mollusks, it appears that the rather well conserved location of certain positively charged residues and of the large hydrophobic cluster are enough to generate the bactericidal potency and the Gram-positive specificity.     

Elongation of the interchain disulfide bridges of insulin. A synthetic analog.

The sythesis and isolation in purified form of an analog of insulin with the interchain disulfide bridges elongated by a methylene group is described. This analog differs from the parent molecule in that the cystein residues occupying positions A-7 and A-20 and involved in the formation of the two interchain disulfide bridges of insulin have been replaced by homocysteine residues. For the synthesis of this compound the Hcy-7, 20-A chain of sheep insulin was chemically synthesized and isolated in the S-sulfonated form. Conversion of the latter product to the sulfhydryl derivative and combination with the S-sulfonated form of the B chain of sheep insulin yielded the [Hcy-7, 20-A] insulin. Isolation of the analog from the combination mixture was effected by chromatography on a carboxymethylcellulose column with acetate buffer (pH 3.3) and an exponential sodium chloride gradient. This analog, by the mouse convulsion assay methods and in doses at least 40-fold higher than those normally used for insulin assay, was inactive. By the radioimmunoassay method this synthetic analog was found to possess a potency of 2 i.u./mg. It is concluded that the biological activity of insulin depends critically on a particular geometry conferred on the molecule by the proper placement of the A and B chains.     

Synthesis, and functional properties of a modified human insulin A-chain: implication in a 'mini-insulin' structure determination

The design and total synthesis of a novel insulin A-chain mutant, analogue 3, is reported. In this compound, the cysteines implied in the two insulin inter-chain disulfide bridges are replaced by two serines (residues Ser(A7) and Ser(A20)) and the intra-A-chain disulfide bridge (residues Cys(A6) and Cys(A11)) is conserved. This A-chain analogue (3) has been tested in three in vitro cell culture assays, using insulin as a reference. The data clearly showed that analogue 3 mimics insulin effects on DNA synthesis, glucose uptake and glycogen synthesis without loss of potency as compared to insulin. To our knowledge, these are the first results showing that an isolated insulin chain displays functional properties similar to those of insulin. The implication of these new findings in insulin structure-function relationships and in a 'mini-insulin' structure determination is discussed.     

Studies on the total synthesis of an A7,B7-dicarbainsulin. III. Assembly of segments and generation of biological activity

As a further contribution to the synthesis of an insulin analogue with a stable A7-B7 interchain bond, the synthesis of A(8-21) by solution methods, and of B(9-25) as well as [7-(2,7-diaminosuberic acid)]B(1-8) by solid phase methods is described. In the latter compound, the amino group of the diaminosuberic acid residue was acylated with A(1-6), and the resulting "U-peptide" sequentially elongated with the C-terminal A- and finally B-chain sequences. The conversion of the product into the disulfide moiety gave a mixture which could not be resolved by currently available methods. However, the low biological activity of the crude product indicates that the A7-B7 disulfide bond is not crucially important for the activity of insulin.     

Roles of Individual Disulfide Bridges in the Conformation and Activity of μ-Conotoxin GIIIA,a Peptide Blocker of Muscle Sodium Channels

Seven analogs of μ-conotoxin GIIIA (μ-GIIIA), a specific blocker of muscle sodium channels, were synthesized by replacing stepwise the three cystine residues with Ala. The circular dichroism spectra of the analogs suggested that the deletion of disulfide bonds gradually randamized a conformation. The inhibitory effects on the twitch contractions of the rat diaphragm showed that the deletion of one disulfide bond reduced the potency to less than 1 % of control. Monocyclic analogs and a linear analog were almost inactive. Therefore, all three disulfide bridges are essential for stabilizing the specific conformation of μ-GIIIA to show biological activity.     

In situ maleimide bridging of disulfides and a new approach to protein PEGylation

The introduction of non-natural entities into proteins by chemical modification has numerous applications in fundamental biological science and for the development and manipulation of peptide and protein therapeutics. The reduction of native disulfide bonds provides a convenient method to access two nucleophilic cysteine residues that can serve as ideal attachment points for such chemical modification. The optimum bioconjugation strategy utilizing these cysteine residues should include the reconstruction of a bridge to mimic the role of the disulfide bond, maintaining structure and stability of the protein. Furthermore, the bridging chemical modification should be as rapid as possible to prevent problems associated with protein unfolding, aggregation, or disulfide scrambling. This study reports on an in situ disulfide reduction-bridging strategy that ensures rapid sequestration of the free cysteine residues in a bridge, using dithiomaleimides. This approach is then used to PEGylate the peptide hormone somatostatin and retention of biological activity is demonstrated.     

Evidence for difference in the roles of two cysteine residues involved in disulfide bond formation in the folding of human lysozyme

Human lysozyme is made up of 130 amino acid residues and has four disulfide bonds at Cys6-Cys128, Cys30-Cys116, Cys65-Cys81, and Cys77-Cys95. Our previous results using the Saccharomyces cerevisiae secretion system indicate that the individual disulfide bonds of human lysozyme have different functions in the correct in vivo folding and enzymatic activity of the protein (Taniyama, Y., Yamamoto, Y., Nakao, M., Kikuchi, M., and Ikehara, M. (1988) Biochem. Biophys. Res. Commun. 152, 962-967). In this paper, we report the results of experiments that were focused on the roles of Cys65 and Cys81 in the folding of human lysozyme protein in yeast. A mutant protein (C81A), in which Cys81 was replaced with Ala, had almost the same enzymatic activity and conformation as those of the native enzyme. On the other hand, another mutant (C65A), in which Cys65 was replaced with Ala, was not found to fold correctly. These results indicate that Cys81 is not a requisite for both correct folding and activity, whereas Cys65 is indispensable. The mutant protein C81A is seen to contain a new, non-native disulfide bond at Cys65-Cys77. The possible occurrence of disulfide bond interchange during our mapping experiments cannot be ruled out by the experimental techniques presently available, but characterization of other mutant proteins and computer analysis suggest that the intramolecular exchange of disulfide bonds is present in the folding pathway of human lysozyme in vivo.     

Development of specific and non-specific somatostatin analogs

Biological activity of six somatostatin analogs has been investigated. In these analogs, disulfide bond is replaced by ethylene bond cyclized with alpha-amino suberic acid. In addition, they contain unique D-configuration in both Trp8 and Cys14 moiety with dicarba substitution. An analog of the short chain length, C omega 7-cyclo (Phe6-Phe7-D-Trp8-Lys9-Thr10-Phe11-D-Asu14) (analog 4) has suppressive effect for GH, but not for other hormones. Analog 6, C omega 9-cyclo(Asn5-Phe6-Phe7-D-Trp8-Lys9-Thr10-Ph e11-Thr12-D-Asu14), has suppressed GH and insulin secretion, but not for gastrin and glucagon. Analog 1, C omega 11-cyclo (Lys4-Asn5-Phe6-Phe7-D-Trp8-Lys9-Thr10-Phe11- Thr12-Ser13-D-Asu14] and 5, C omega 9-cyclo (Lys4-Asn5-Phe6-Phe7-D-Trp8-Lys9-Thr10-Phe11-D-+ ++Asu14) have broad suppressive effect for GH, gastrin, insulin and glucagon release after arginine infusion. The shortest analog, analog 2, C omega 5-cyclo (Phe7-D-Trp8-Lys9-Thr10-D-Asu14) has weak suppressive effect of GH, insulin and glucagon secretion, and it is suggested that Phe6 and Phe11 are necessary for the appearance of suppressive effect of GH. Specific analog, analog 4, may be useful for the future treatment for acromegaly and diabetic retinopathy. Nonspecific analogs, 1 and 5 are candidates for the clinical application of wide variety.     

Dynamics and thermodynamic properties of CXCL7 chemokine

Chemokines form a family of signaling proteins mainly responsible for directing the traffic of leukocytes, where their biological activity can be modulated by their oligomerization state. We characterize the dynamics and thermodynamic stability of monomer and homodimer structures of CXCL7, one of the most abundant platelet chemokines, using experimental methods that include circular dichroism (CD) and nuclear magnetic resonance (NMR) spectroscopy, and computational methods that include the anisotropic network model (ANM), molecular dynamics (MD) simulations and the distance constraint model (DCM). A consistent picture emerges for the effects of dimerization and Cys5‐Cys31 and Cys7‐Cys47 disulfide bonds formation. The presence of disulfide bonds is not critical for maintaining structural stability in the monomer or dimer, but the monomer is destabilized more than the dimer upon removal of disulfide bonds. Disulfide bonds play a key role in shaping the characteristics of native state dynamics. The combined analysis shows that upon dimerization flexibly correlated motions are induced between the 30s and 50s loop within each monomer and across the dimer interface. Interestingly, the greatest gain in flexibility upon dimerization occurs when both disulfide bonds are present, and the homodimer is least stable relative to its two monomers. These results suggest that the highly conserved disulfide bonds in chemokines facilitate a structural mechanism that is tuned to optimally distinguish functional characteristics between monomer and dimer. Proteins 2015; 83:1987–2007. © 2015 Wiley Periodicals, Inc.     

Study of a major intermediate in the oxidative folding of leech carboxypeptidase inhibitor: contribution of the fourth disulfide bond

The oxidative folding pathway of leech carboxypeptidase inhibitor (LCI; four disulfide bonds) proceeds through the formation of two major intermediates (III-A and III-B) that contain three native disulfide bonds and act as strong kinetic traps in the folding process. The III-B intermediate lacks the Cys19-Cys43 disulfide bond that links the beta-sheet core with the alpha-helix in wild-type LCI. Here, an analog of this intermediate was constructed by replacing Cys19 and Cys43 with alanine residues. Its oxidative folding follows a rapid sequential flow through one, two, and three disulfide species to reach the native form; the low accumulation of two disulfide intermediates and three disulfide (scrambled) isomers accounts for a highly efficient reaction. The three-dimensional structure of this analog, alone and in complex with carboxypeptidase A (CPA), was determined by X-ray crystallography at 2.2A resolution. Its overall structure is very similar to that of wild-type LCI, although the residues in the region adjacent to the mutation sites show an increased flexibility, which is strongly reduced upon binding to CPA. The structure of the complex also demonstrates that the analog and the wild-type LCI bind to the enzyme in the same manner, as expected by their inhibitory capabilities, which were similar for all enzymes tested. Equilibrium unfolding experiments showed that this mutant is destabilized by approximately 1.5 kcal mol(-1) (40%) relative to the wild-type protein. Together, the data indicate that the fourth disulfide bond provides LCI with both high stability and structural specificity.     

Receptor binding activity and cytosolic free calcium response by synthetic endothelin analogs in cultured rat vascular smooth muscle cells

Using a variety of synthetic analogs of porcine endothelin (pET), we have studied the effects of these analogs on receptor binding activity and cytosolic free Ca2+ concentrations ([Ca2+]i) in cultured rat vascular smooth muscle cells (VSMC). Removal of C-terminal Trp21 residue, truncated derivatives pET(1-15) and (16-21), substitution of disulfide bond, Cys(3-11) or Cys(1-15), by Cys (Acm), all resulted in a complete loss of receptor binding activity and [Ca2+]i response, while N-terminal elongation of Lys-Arg residues, but not oxidation of Met7 residue, decreased receptor binding activity and [Ca2+]i response. [Cys1-15,Cys3-11]pET was far more potent than [Cys1-11,Cys3-15]pET in receptor binding and [Ca2+]i response. These data indicate that the C-terminal Trp21 as well as the proper double cyclic structure formed by the intramolecular disulfide bonds of the pET molecule are essential for receptor binding and subsequent [Ca2+]i increase in rat VSMC.     

Stability and structure-forming properties of the two disulfide bonds of alpha-conotoxin GI

alpha-Conotoxin GI is a 13 residue snail toxin peptide cross-linked by Cys2-Cys7 and Cys3-Cys13 disulfide bridges. The formation of the two disulfide bonds by thiol/disulfide exchange with oxidized glutathione (GSSG) has been characterized. To characterize formation of the first disulfide bond in each of the two pathways by which the two disulfide bonds can form, two model peptides were synthesized in which Cys3 and Cys13 (Cono-1) or Cys2 and Cys7 (Cono-2) were replaced by alanines. Equilibrium constants were determined for formation of the single disulfide bonds of Cono-1 and Cono-2, and an overall equilibrium constant was measured for formation of the two disulfide bonds of alpha-conotoxin GI in pH 7.00 buffer and in pH 7. 00 buffer plus 8 M urea using concentrations obtained by HPLC analysis of equilibrium thiol/disulfide exchange reaction mixtures. The results indicate a modest amount of cooperativity in the formation of the second disulfide bond in both of the two-step pathways by which alpha-conotoxin GI folds into its native structure at pH 7.00. However, when considered in terms of the reactive thiolate species, the results indicate substantial cooperativity in formation of the second disulfide bond. The solution conformational and structural properties of Cono-1, Cono-2, and alpha-conotoxin GI were studied by 1H NMR to identify structural features which might facilitate formation of the disulfide bonds or are induced by formation of the disulfide bonds. The NMR data indicate that both Cono-1 and Cono-2 have some secondary structure in solution, including some of the same secondary structure as alpha-conotoxin GI, which facilitates formation of the second disulfide bond by thiol/disulfide exchange. However, both Cono-1 and Cono-2 are considerably less structured than alpha-conotoxin GI, which indicates that formation of the second disulfide bond to give the Cys2-Cys7, Cys3-Cys13 pairing induces considerable structure into the backbone of the peptide.