Construction of a promoter collection for genes co-expression in filamentous fungus Trichoderma reesei

Trichoderma reesei is the preferred organism for producing industrial cellulases. However, cellulases derived from T. reesei have their highest activity at acidic pH. When the pH value increased above 7, the enzyme activities almost disappeared, thereby limiting the application of fungal cellulases under neutral or alkaline conditions. A lot of heterologous alkaline cellulases have been successfully expressed in T. reesei to improve its cellulolytic profile. To our knowledge, there are few reports describing the co-expression of two or more heterologous cellulases in T. reesei. We designed and constructed a promoter collection for gene expression and co-expression in T. reesei. Taking alkaline cellulase as a reporter gene, we assessed our promoters with strengths ranging from 4 to 106 % as compared to the pWEF31 expression vector (Lv D, Wang W, Wei D (2012) Construction of two vectors for gene expression in Trichoderma reesei. Plasmid 67(1):67–71). The promoter collection was used in a proof-of-principle approach to achieve the co-expression of an alkaline endoglucanase and an alkaline cellobiohydrolase. We observed higher activities of both cellulose degradation and biostoning by the co-expression of an endoglucanase and a cellobiohydrolase than the activities obtained by the expression of only endoglucanase or cellobiohydrolase. This study makes the process of engineering expression of multiple genes easier in T. reesei.     

强启动子glaA介导cbhB基因在黑曲霉中的表达

黑曲霉纤维素酶三类不同酶系中,纤维二糖水解酶基因表达处于很低水平,导致纤维素酶总体活力水平不高。为构建黑曲霉纤维素酶高产菌株,采用基因工程方法,全基因合成拼接黑曲霉高表达葡萄糖淀粉酶基因glaA的强启动子片段与纤维二糖水解酶基因cbhB编码区片段,然后将杂合基因克隆到二元载体pCAMBIA1301上,重组质粒通过农杆菌介导转化黑曲霉分生孢子,携带杂合基因的T-DNA片段插入到黑曲霉转化子的染色体上,共筛选到48个具有潮霉素抗性的转化子。纤维素酶活力水平测定结果显示,转化子A3-9的CMC酶活力最高,为野生型黑曲霉菌株的1.31倍;转化子B1-7与A3-6的滤纸酶活力最高,为野生型黑曲霉菌株2.51倍。另外,初步分析了杂合基因在黑曲霉中的表达所需的诱导条件。     

Flow cytometric sorting of the filamentous fungus Trichoderma reesei for improved strains

Metabolic measurements and screening of Trichoderma reesei have conventionally been performed during the hyphal stage of fungal development. To determine if flow cytometric measurements of protein expression could be made on germinating spores we created a gene construct, placing the Renilla reniformis green fluorescent protein gene under control of the cellobiohydrolase I (cbh1) promoter and terminator of T. reesei. This vector was transformed into T. reesei and GFP expression was measured in germlings by flow cytometry. Fluorescence associated with GFP expression was observed in germlings grown under conditions known to induce cellulases in Trichoderma. Spores were mutated using UV light and germinating spores were screened for increased GFP expression using high-speed cell sorting, to select for strains with genetic changes associated with increased protein expression. Secondary screens for cellulase production were conducted in microtitre plates. Flow cytometric screening of germinating spores expressing GFP yielded a mutant with improved ability to hydrolyse biomass.     

pSAT RNA interference vectors: a modular series for multiple gene down-regulation in plants

RNA interference (RNAi) is a powerful tool for functional gene analysis, which has been successfully used to down-regulate the levels of specific target genes, enabling loss-of-function studies in living cells. Hairpin (hp) RNA expression cassettes are typically constructed on binary plasmids and delivered into plant cells by Agrobacterium-mediated genetic transformation. Realizing the importance of RNAi for basic plant research, various vectors have been developed for RNAi-mediated gene silencing, allowing the silencing of single target genes in plant cells. To further expand the collection of available tools for functional genomics in plant species, we constructed a set of modular vectors suitable for hpRNA expression under various constitutive promoters. Our system allows simple cloning of the target gene sequences into two distinct multicloning sites and its modular design provides a straightforward route for replacement of the expression cassette's regulatory elements. More importantly, our system was designed to facilitate the assembly of several hpRNA expression cassettes on a single plasmid, thereby enabling the simultaneous suppression of several target genes from a single vector. We tested the functionality of our new vector system by silencing overexpressed marker genes (green fluorescent protein, DsRed2, and nptII) in transgenic plants. Various combinations of hpRNA expression cassettes were assembled in binary plasmids; all showed strong down-regulation of the reporter genes in transgenic plants. Furthermore, assembly of all three hpRNA expression cassettes, combined with a fourth cassette for the expression of a selectable marker, resulted in down-regulation of all three different marker genes in transgenic plants. This vector system provides an important addition to the plant molecular biologist's toolbox, which will significantly facilitate the use of RNAi technology for analyses of multiple gene function in plant cells.     

High accumulation of bioactive peptide in transgenic rice seeds by expression of introduced multiple genes

We have developed a simple binary vector construction system for the simultaneous expression of multiple genes in plants. Up to three independent gene cassettes can be easily integrated into one binary vector using the MultiSite Gateway System. Using this system, we produced transgenic rice plants that accumulated high levels of the hypocholesterolaemic peptide lactostatin (IIAEK) in endosperm. Binary vectors were constructed that could accommodate up to three independent modified glutelin gene cassettes encoding multimer lactostatin in the variable regions. Eight construct permutations were used for rice transformation. We measured the accumulation of lactostatin expressed as a glutelin fusion protein in the mature seeds of 105 independent transgenic rice lines. A general correlation was observed between accumulation level and gene number in the vector constructs, indicating that a higher accumulation of lactostatin was obtained from transgenic rice plants containing the maximum number of gene inserts. These results indicate that this strategy is applicable for the selection of transgenic lines containing large amounts of bioactive peptides in rice seeds.     

Genetic engineering of Trichoderma to produce strains with novel cellulase profiles.

Genetic engineering has been used to modify the proportion of different cellulases produced by a hypercellulolytic Trichoderma reesei mutant strain. A general expression vector, pAMH110, containing the promoter and terminator sequences of the strongly expressed main cellobiohydrolase 1 (cbh1) gene was used to overexpress a cDNA coding for EGI, the major endoglucanase (1,4,beta-D-glucan glucanohydrolase, EC 3.2.1.4). An in vitro modified cbh1 cDNA, incapable of coding for active enzyme, was used to inactivate the major cellobiohydrolase (1,4-beta-D-glucan cellobiohydrolase, EC 3.2.1.91) gene. In this way, new strains producing elevated amounts of the specific endoglucanase 1 (EGI) and/or lacking the major cellobiohydrolase (CBHI) were produced, and these have been further characterized.     

Functional display of fungal cellulases from <Emphasis Type="Italic">Trichoderma </Emphasis><Emphasis Type="Italic">reesei</Emphasis> on phage M13

To test whether the phage display technology could be applied in cellulase engineering, phagemids harboring the genes encoding the mature forms of cellobiohydrolase I (CBH I) and endoglucanase I (EG I) from filamentous fungus Trichoderma reesei were constructed, respectively. CBH I and EG I fused to the phage coat protein encoded by the g3 gene were expressed and displayed on phage M13. The phage-bound cellulases retained their activities as determined by hydrolysis of the corresponding substrates, Also, their binding abilities to insoluble cellulose substrate were confirmed by an ELISA method. Overall, these results demonstrate that cellulases can be displayed on phage surface while maintaining their biological function, thus providing an alternative for directed evolution and high-throughput screening for improved cellulases.     

嗜热毛壳菌外切葡聚糖纤维二糖水解酶的纯化和部分性质研究

研究液体发酵嗜热毛壳菌(Chaetomium thermophilum)产生的一种外切葡聚糖纤维二糖水解酶的分离纯化及特性。粗酶液经硫酸铵沉淀、DEAE-Sepharose Fast Flow阴离子层析、Sephacryl S-100分子筛层析、Q Sepharose Fast Flow强阴离子层析等步骤后获得凝胶电泳均一的外切葡聚糖纤维二糖水解酶。经12.5%SDS-PAGE和凝胶过滤层析方法测得该酶的分子量大小约为66.3kDa和67.1kDa。该酶反应的最适温度和pH值分别为65℃和5.0。在60℃以下酶比较稳定,在70℃酶的半衰期为1h,在80℃下保温20min仍具有20%的活性,该酶的热稳定性较中温真菌的同类酶高,与国外报道的嗜热真菌的同类酶热稳定性接近。以pNPC为底物的Km值为0.956mmol/L。     

里氏木霉双基因同步缺失菌株的构建与甘露聚糖酶表达研究

在里氏木霉中建立了一个快速的双基因位点同步同源重组新方法,较好解决了里氏木霉基因逐个敲除周期长等问题。研究以里氏木霉自身甘露聚糖酶基因（man5A）为重组表达的报告基因,通过一步转化,将该基因定点整合入纤维二糖水解酶Ⅰ（cbh1）基因位点,同时缺失主要的两个纤维素酶基因（cbh1、cbh2）,得到重组工程菌Man12。将重组工程菌Man12与出发菌株Tu6Δku70进行摇瓶发酵,结果显示,重组菌株的甘露聚糖酶产量比出发菌株提高10倍,而纤维素酶产量降低了60%,胞外总蛋白分泌水平降低了40%。Real-time PCR检测甘露聚糖酶基因（man5A）的转录水平,发现重组菌株较出发菌株提高了25倍。在里氏木霉中首次报道了通过一步转化实现两个基因同步定点整合的方法,对利用基因工程手段构建高效表达重组蛋白的里氏木霉工程菌株具有一定的指导意义。     

A fluorescent cassette-based strategy for engineering multiple domain fusion proteins

Background

The engineering of fusion proteins has become increasingly important and most recently has formed the basis of many biosensors, protein purification systems, and classes of new drugs. Currently, most fusion proteins consist of three or fewer domains, however, more sophisticated designs could easily involve three or more domains. Using traditional subcloning strategies, this requires micromanagement of restriction enzymes sites that results in complex workaround solutions, if any at all.

Results

Therefore, to aid in the efficient construction of fusion proteins involving multiple domains, we have created a new expression vector that allows us to rapidly generate a library of cassettes. Cassettes have a standard vector structure based on four specific restriction endonuclease sites and using a subtle property of blunt or compatible cohesive end restriction enzymes, they can be fused in any order and number of times. Furthermore, the insertion of PCR products into our expression vector or the recombination of cassettes can be dramatically simplified by screening for the presence or absence of fluorescence.

Conclusions

Finally, the utility of this new strategy was demonstrated by the creation of basic cassettes for protein targeting to subcellular organelles and for protein purification using multiple affinity tags.

     

Rational design and construction of multi-copy biomanufacturing islands in mammalian cells

Cell line development is a critical step in the establishment of a biopharmaceutical manufacturing process. Current protocols rely on random transgene integration and amplification. Due to considerable variability in transgene integration profiles, this workflow results in laborious screening campaigns before stable producers can be identified. Alternative approaches for transgene dosage increase and integration are therefore highly desirable. In this study, we present a novel strategy for the rapid design, construction, and genomic integration of engineered multiple-copy gene constructs consisting of up to 10 gene expression cassettes. Key to this strategy is the diversification, at the sequence level, of the individual gene cassettes without altering their protein products. We show a computational workflow for coding and regulatory sequence diversification and optimization followed by experimental assembly of up to nine gene copies and a sentinel reporter on a contiguous scaffold. Transient transfections in CHO cells indicates that protein expression increases with the gene copy number on the scaffold. Further, we stably integrate these cassettes into a pre-validated genomic locus. Altogether, our findings point to the feasibility of engineering a fully mapped multi-copy recombinant protein ‘production island’ in a mammalian cell line with greatly reduced screening effort, improved stability, and predictable product titers.     

MHF组蛋白折叠复合体组分编码基因MHF1过表达对重组酿酒酵母纤维素酶生产的影响

【背景】重组酿酒酵母可用于生产多种药用蛋白和工业酶等外源蛋白,但蛋白分泌水平低是限制其异源蛋白高效生产的重要因素。异源蛋白表达和分泌过程可能会对宿主细胞产生多种胁迫,因此,研究胁迫响应相关基因对重组酵母异源蛋白生产的影响具有重要意义。Mhf1p是MHF组蛋白折叠复合体的组分之一,与DNA损伤修复及维持基因组稳定性有关,但其对异源蛋白生产的作用尚不清楚。【目的】研究MHF1过表达对重组酿酒酵母蛋白生产的影响。【方法】在分泌表达纤维素酶的重组酿酒酵母菌株中利用基于CRISPR-Cas9的基因组编辑技术整合过表达MHF1,分析其对产酶的影响,并探讨影响产酶的分子机理。【结果】与出发菌株相比,过表达MHF1菌株的外切纤维素酶CBH酶活性提高了38%。对过表达MHF1的CBH生产菌株中蛋白合成和分泌途径相关基因转录水平进行检测,发现与对照菌株相比,CBH1基因和与分泌相关的SEC22、ERV29等基因在不同时间点呈现不同程度显著上调。【结论】MHF1过表达可促进酿酒酵母异源外切纤维素酶的生产,并影响外源酶基因和分泌途径基因的表达,可能通过对多基因的协同表达影响促进产酶。     

Establishing a dual knock-out cell line by lentivirus based combined CRISPR/Cas9 and Loxp/Cre system

The clustered regulatory interspersed short palindromic repeat (CRISPR)/CRISPR-associated protein (Cas) system has been widely used for gene knock-out. Lentiviral vectors have been commonly used as a delivery method for this system, however, prolonged Cas9/sgRNA expression due to lentiviral integration can lead to accumulating off-target mutations. To solve this issue in engineering a gene knock-out cell line, this study established a novel system, which was composed of two lentiviral vectors. One lentiviral vector carried simultaneously sgRNAs and CRISPR/Cas9 expression cassettes targeting single or multiple gene(s); the other lentiviral vector carried Cre that could remove excess sgRNAs and Cas9 expression cassettes in the genome after gene targeting was achieved. To prove the principle, two candidate genes, extracellular matrix protein 1 (ECM1) and progranulin (PGRN), both highly expressed in MDA-MB-231 cells, were selected for testing the novel system. A dual knock-out of ECM1 and PGRN was successfully achieved in MDA-MB-231 cell line, with the sgRNAs and Cas9 expression cassettes being removed by Cre. This system should have great potential in applications for multiple genes knock-out in vitro.     

Recombinant Cellulase Accumulation in the Leaves of Mature,Vegetatively Propagated Transgenic Sugarcane

The cost of enzymes that hydrolyse lignocellulosic substrates to fermentable sugars needs to be reduced to make cellulosic ethanol a cost-competitive liquid transport fuel. Sugarcane is a perennial crop and the successful integration of cellulase transgenes into the sugarcane production system requires that transgene expression is stable in the ratoon. Herein, we compared the accumulation of recombinant fungal cellobiohydrolase I (CBH I), fungal cellobiohydrolase II (CBH II), and bacterial endoglucanase (EG) in the leaves of mature, initial transgenic sugarcane plants and their mature ratoon. Mature ratoon events containing equivalent or elevated levels of active CBH I, CBH II, and EG in the leaves were identified. Further, we have demonstrated that recombinant fungal CBH I and CBH II can resist proteolysis during sugarcane leaf senescence, while bacterial EG cannot. These results demonstrate the stability of cellulase enzyme transgene expression in transgenic sugarcane and the utility of sugarcane as a biofactory crop for production of cellulases.     

A baculovirus superinfection system: efficient vehicle for gene transfer into Drosophila S2 cells

The baculovirus expression vector system is considered to be a safe, powerful, but cell-lytic heterologous protein expression system in insect cells. We show here that there is a new baculovirus system for efficient gene transfer and expression using the popular and genetically well-understood Drosophila S2 cells. The recombinant baculovirus was constructed to carry an enhanced green fluorescent protein under the control of polyhedrin promoter as a fluorescent selection marker in the Sf21 cell line. Recombinant baculoviruses were then used to transduce S2 cells with target gene expression cassettes containing a Drosophila heat shock protein 70, an actin 5C, or a metallothionein promoter. Nearly 100% of the S2 cells showed evidence of gene expression after infection. The time course for the optimal protein expression peaked at 24 to 36 h postinfection, which is significantly earlier than a polyhedrin-driven protein expression in Sf21 cells. Importantly, S2 cells did not appear to be lysed after infection, and the protein expression levels are comparable to those of proteins under the control of polyhedrin promoter in several lepidopteran cell lines. Most surprisingly, S2 cells permit repetitive infections of multiple baculoviruses over time. These findings clearly suggest that this baculovirus-S2 system may effect the efficient gene transfer and expression system of the well-characterized Drosophila S2 cells.     

Combinatorial metabolic pathway assembly in the yeast genome with RNA-guided Cas9

The yeast Saccharomyces cerevisiae is an important industrial platform for the production of grain and cellulosic ethanol, isobutanol, butanediol, isoprenoids, and other chemicals. The construction of a successful production strain usually involves multiple gene knockouts and chromosomal integration of expression cassettes to redirect the metabolic fluxes for the conversion of sugars and other feed stocks into the desired product. RNA-guided Cas9 based genome editing has been demonstrated in many prokaryotic and eukaryotic hosts including S. cerevisiae, in which it has been additionally exploited as a tool for metabolic engineering. To extend the utilization of RNA-guided Cas9 as a metabolic pathway building tool, we demonstrated the direct assembly and chromosomal integration of up to 17 overlapping DNA fragments encoding the beta-carotene biosynthetic pathway. Furthermore, we generated a combinatorial strain library for the beta-carotene biosynthetic pathway, directly integrated into the yeast genome to create a diverse library of strains. This enabled the screening of combinatorial libraries in stable chromosomally integrated strains for rapid improvements of product titers. This combinatorial approach for pathway assembly will significantly accelerate the current speed of metabolic engineering for S. cerevisiae as an industrial platform, and increase the number of strains that can be simultaneously evaluated for enzyme screening, expression optimization and protein engineering to achieve the titer, rate and yield necessary for the commercialization of new industrial fermentation products.     

Isolation of cellulolytic enzymes from moldy silage by new culture-independent strategy

A culture-independent strategy has been developed for investigation of cellulases in moldy silage. By the qualitative differences in the adsorption of cellulases on lingo-cellulosics, a new cellobiohydrolase (CBH) with apparent molecular mass of 194 kDa was isolated and characterized. The entire extracellular proteins of silage were separated by two-dimensional gel electrophoresis, and five potential endoglucanases were identified by activity staining. These results demonstrate the feasibility of direct screening cellulases from environment without microorganism cultivation and this strategy could be expected to facilitate the research of uncultured microorganisms.