Ultrasound shear wave elastography measurement of the deep posterior cervical muscles: Reliability and ability to differentiate between muscle contraction states

The deep posterior cervical muscles (DPCM), specifically the semispinalis cervicis and cervical multifidus, are often impaired in patients with neck disorders and have been assessed by several imaging techniques. Prior ultrasound shear wave elastography (SWE) imaging and reliability assessments of the DPCM were performed utilizing similar positioning as assessments for the more superficial cervical extensors. Our objectives were to describe an SWE imaging technique for the DPCM, establish intra-rater reliability of DPCM SWE, and compare DPCM shear modulus during rest and submaximal contraction in both prone and seated positions in individuals without spinal pain. In sixteen participants, the DPCM was located using B‐mode ultrasound, then muscle shear modulus was assessed via SWE at both rest and with contraction against a 2‐kg resistance applied at the C2 spinous process. Within‐day intra‐rater reliability was moderate to good (ICC = 0.70–0.88). The DPCM were stiffer during contraction than at rest in the prone position (p = 0.002), and at rest in sitting versus at rest in prone (p = 0.003). Further research is needed to assess DPCM-specific SWE in symptomatic individuals and compare DPCM shear modulus to electromyography across contraction intensities.     

The effect of static neck flexion on mechanical and neuromuscular behaviors of the cervical spine

Occupations that involve sustained or repetitive neck flexion are associated with a higher incidence of neck pain. Little in vivo information is available on the impact of static neck flexion on cervical spinal tissue. The aim of this study was to assess changes in mechanical and neuromuscular behaviors to sustained neck flexion in healthy adults. Sixty healthy subjects aged 20–35 years participated in this study. The participants were exposed to static neck flexion at a fixed angle of full flexion for 10 min. Mechanical and neuromuscular responses of the cervical spine to sudden perturbations were measured pre- and post-exposure. Magnitude of load-relaxation during flexion exposure, stiffness, peak head angular velocity, and reflexive activities of cervical muscles were recorded. Effective neck stiffness decreased significantly, especially in female participants (P = 0.0001). The reflexive response of the cervical erector spinae muscles to head perturbation delayed significantly (P = 0.0001). Peak head angular velocity was significantly increased after exposure to neck flexion for 10 min, especially in female participants (P = 0.001). In the present study, static flexion resulted in changes in mechanical and neuromuscular behavior of the cervical spine, potentially leading to decreased stiffness of the cervical spine. The results confirm the importance of maintaining a correct head and neck position during work and improving the work environment to reduce the cervical spinal load and work-related neck pain.     

Effective muscle elongation positions for the neck extensor muscles: An ultrasonic shear wave elastography study

This study aimed to clarify the effective stretching positions for neck extensor muscles. Fifteen healthy men were measured shear moduli of the right neck extensor muscles using ultrasound shear wave elastography in following positions: rest (Rest), flexion (Flex), contralateral bending (Bend), flexion + contralateral bending (Flex → Bend), flexion + contralateral bending + contralateral rotation (Flex → Bend → ConRot), and flexion + contralateral bending + ipsilateral rotation (Flex → Bend → IpsRot). The increase in the shear modulus indicated a greater muscle elongation. Regarding the upper trapezius and splenius capitis, the shear moduli at Flex → Bend, Flex → Bend → ConRot, and Flex → Bend → IpsRot were significantly higher than those at Rest. The shear moduli at stretching positions, including contralateral bending, were significantly higher than those at Rest and Flex in the levator scapulae. The results indicated that the stretching position with a combination of flexion and contralateral bending could be effective for elongation of the upper trapezius and splenius capitis. Furthermore, the stretching positions including contralateral bending could be effective for the levator scapulae.     

Relationship between resting medial gastrocnemius stiffness and drop jump performance

Although the influence of the series elastic element of the muscle–tendon unit on jump performance has been investigated, the corresponding effect of the parallel elastic element remains unclear. This study examined the relationship between the resting calf muscle stiffness and drop jump performance. Twenty-four healthy men participated in this study. The shear moduli of the medial gastrocnemius and the soleus were measured at rest as an index of muscle stiffness using ultrasound shear wave elastography. The participants performed drop jumps from a 15 cm high box. The Spearman rank correlation coefficient was used to examine the relationships between shear moduli of the muscles and drop jump performance. The medial gastrocnemius shear modulus showed a significant correlation with the drop jump index (jump height/contact time) (r = 0.414, P = 0.044) and jump height (r = 0.411, P = 0.046), but not with contact time (P > 0.05). The soleus shear modulus did not correlate with these jump parameters (P > 0.05). These results suggest that the resting medial gastrocnemius stiffness can be considered as one of the factors that influence drop jump performance. Therefore, increase in resting muscle stiffness should enhance explosive athletic performance in training regimens.     

Linear relationship between electromyography and shear wave elastography measurements persists in deep muscles of the upper extremity

Recent works have demonstrated a linear relationship between muscle activation and shear modulus in various superficial muscles. As such, it may be possible to overcome limitations of traditional electromyography (EMG) methods by assessing activation using shear wave elastography. However, the relationship has not been wholly validated in deep muscles. This study measured the association between squared shear wave velocity, which is related to shear modulus, and activation within superficial and deep muscles. This relationship was also compared between surface and intramuscular EMG electrodes. We simultaneously recorded EMG and shear wave velocity in one deep (brachialis) and one superficial (brachioradialis) muscle in ten healthy individuals during isometric elbow flexion across a wide range of contraction intensities. Muscle activation and squared shear wave velocity demonstrated good reliability (ICC > 0.75) and showed a linear relationship (P < 0.05) for all muscle/EMG electrode type combinations (study conditions) after down-sampling. Study condition was not a significant within-subject factor to the slope or intercept of the relationship (P > 0.05). This work demonstrates that activation of both superficial and deep muscles can be assessed noninvasively using ultrasound shear wave elastography and is a critical step toward demonstrating elastography’s utility as an alternative to EMG.     

Altered activity of the serratus anterior during unilateral arm elevation in patients with cervical disorders

Altered activity in the axioscapular muscles is considered to be an important feature in patients with neck pain. The activity of the serratus anterior (SA) and trapezius muscles during arm elevation has not been investigated in these patients. The objectives of this study was to investigate whether there is a pattern of altered activity in the SA and trapezius in patients with insidious onset neck pain (IONP) (n = 22) and whiplash associated disorders (WAD) (n = 27). An asymptomatic group was selected for baseline measurements (n = 23).Surface electromyography was used to measure the onset of muscle activation and duration of muscle activity of the SA as well as the upper, middle, and lower trapezius during unilateral arm elevation in the three subject groups. Both arms were tested.With no interaction, the main effect for the onset of muscle activation and duration of muscle activity for serratus anterior was statistically significant among the groups. Post hoc comparison revealed a significantly delayed onset of muscle activation and less duration of muscle activity in the IONP group, and in the WAD group compared to the asymptomatic group. There were no group main effects or interaction effects for upper, middle and lower trapezius.This finding may have implications for scapular stability in these patients because the altered activity in the SA may reflect inconsistent or poorly coordinated muscle activation that may reduce the quality of neuromuscular performance and induce an increased load on the cervical and the thoracic spine.     

Shear modulus of multifidus and longissimus muscles measured using shear wave elastography correlates with muscle activity,but depends on image quality

Shear wave elastography (SWE) estimates shear modulus in muscle. This is interpreted as an index of muscle stiffness, but depends on muscle characteristics. This study evaluated relationship between shear modulus and myoelectric activity of lumbar multifidus and longissimus muscles to assess its validity. Intramuscular electromyography (EMG) of multifidus (deep [DM], superficial [SM] fibres) at L4/5, longissimus [LG] at L2, were recorded in nine healthy participants. Participants performed isometric trunk extension in side-lying from 0 to 30% maximal voluntary contraction (MVC) with EMG amplitude feedback. Using SWE, two regions of interest (ROI) were investigated in each muscle. Generally, shear modulus was moderately correlated with root mean squared (RMS) EMG (r = 0.50–0.78). Univariate and multiple regression analyses showed ultrasound/SWE features of ‘B-mode quality’ (24.5%), ‘%Void pixels’ (17.9%) and ‘Connective tissue’ (16.2%) explained most variation in the shear modulus/EMG relationship. Regression prediction scores generated using imaging features were correlated with r-coefficients of shear modulus/EMG relationship. When analysis was restricted to high quality data (i.e., regression prediction score above an a priori defined threshold), the shear modulus/EMG relationship increased to r = 0.70–0.96. Although a linear relationship between shear modulus/EMG was confirmed, supporting validity of SWE measures in anatomically distinct back muscles, this depends on image quality.     

Validity of Measurement of Shear Modulus by Ultrasound Shear Wave Elastography in Human Pennate Muscle

Ultrasound shear wave elastography is becoming a valuable tool for measuring mechanical properties of individual muscles. Since ultrasound shear wave elastography measures shear modulus along the principal axis of the probe (i.e., along the transverse axis of the imaging plane), the measured shear modulus most accurately represents the mechanical property of the muscle along the fascicle direction when the probe’s principal axis is parallel to the fascicle direction in the plane of the ultrasound image. However, it is unclear how the measured shear modulus is affected by the probe angle relative to the fascicle direction in the same plane. The purpose of the present study was therefore to examine whether the angle between the principal axis of the probe and the fascicle direction in the same plane affects the measured shear modulus. Shear modulus in seven specially-designed tissue-mimicking phantoms, and in eleven human in-vivo biceps brachii and medial gastrocnemius were determined by using ultrasound shear wave elastography. The probe was positioned parallel or 20° obliquely to the fascicle across the B-mode images. The reproducibility of shear modulus measurements was high for both parallel and oblique conditions. Although there was a significant effect of the probe angle relative to the fascicle on the shear modulus in human experiment, the magnitude was negligibly small. These findings indicate that the ultrasound shear wave elastography is a valid tool for evaluating the mechanical property of pennate muscles along the fascicle direction.     

Cervical spine posteroanterior stiffness differs with neck position

PurposeSpinal stiffness is commonly considered when treating patients with neck pain, but there are few studies reporting the objective measurement of cervical spine stiffness or the possible kinesiological factors that may affect its quantification. The aim of this study was to determine if the position of the neck affects cervical spine stiffness.MethodsAn instrumented stiffness assessment device measured posteroanterior cervical spine stiffness at C4 of 25 prone-lying asymptomatic subjects in three neck positions in randomised order: maximal flexion, maximal extension, and neutral. The device applied five standardised mechanical oscillatory pressures while measuring the applied force and concurrent displacement, defining stiffness as the slope of the linear portion of the force–displacement curve. Repeated measures analysis of variance with Bonferroni-adjusted post hoc comparisons determined whether stiffness differed between neck positions.ResultsThere was a significant difference in cervical spine stiffness between different neck positions (F_(1.6,38.0) = 16.6, P < 0.001). Stiffness was least in extension with a mean of 3.09 N/mm (95% CI 2.59, 3.58) followed by neutral (3.94, 95% CI 3.49, 4.39), and then flexion (4.32, 95% CI 3.96, 4.69).ConclusionWhen assessing cervical spine stiffness, neck position should be standardised to ensure maximal reliability and utility of stiffness judgments.     

Comparison of ultrasonographic characteristics of deep abdominal muscles in women with and without chronic neck pain: a case-control study

Objectives:To compare ultrasonography (USG) parameters of deep abdominal muscles (transversus abdominis-TrA, internal obliques-IO) between women with and without chronic neck pain (CNP).Methods:Women with CNP (n=18; mean-age=37.7 years; mean-BMI=22.7 kg/m²) and asymptomatic individuals (n=18; mean-age=36.1 years; mean-BMI=21.8 kg/m²) participated in the study. The activation of the deep neck flexors (ADNF) was measured using cranio-cervical flexion test. Muscle thickness, changes in thickness (ΔT), and contraction ratio (CR) of deep abdominal muscles were evaluated by ultrasonography device in two conditions: standard-protocol and during ADNF. For each condition, ultrasound image of abdominal muscles was captured at rest and during abdominal draw-in manoeuvre (ADIM).Results:Comparative statistics revealed no significant difference between groups regarding ultrasonography parameters in the standard-protocol (p>0.05). Besides, there was no difference in the CR of TrA and IO between groups in the two conditions. However, women with CNP showed less muscle thickness of TrAADIM during ADNF than the asymptomatic participants (p<0.05). The CNP group also had decreased ΔT of TrA(ADIM-rest) during ADNF compared to the asymptomatic group (p<0.05).Conclusions:The ultrasonography parameters of TrA suggest that motor control in the lumbar region is altered in women with CNP. The combination of cervical stabilization exercises with ADIM can be a novel strategy in the treatment of CNP.     

Effect of hip flexion angle on stiffness of the adductor longus muscle during isometric hip flexion

This study examined the effect of hip flexion angle on the stiffness of the adductor longus (AL) muscle during isometric hip flexion. Seventeen men were recruited. Ten participants performed submaximal voluntary contraction at 0%, 25%, 50%, and 75% of maximal voluntary contraction (MVC) during isometric hip flexion after performing MVC at 0°, 40°, and 80° of hip flexion. Seven participants performed submaximal voluntary tasks during isometric hip extension in addition to hip flexion task. The shear modulus of the AL muscle was used as the index of muscle stiffness, and was measured using ultrasound shear-wave elastography during the tasks at each contraction intensity for each hip flexion angle. During hip flexion, the shear modulus of the AL muscle was higher at 0° than at 40° and 80° of hip flexion at each contraction intensity (p < 0.016). Conversely, a significant effect was not found among hip flexion angle during hip extension at 75% of MVC (p = 0.867). These results suggest that mechanical stress of the AL muscle may be higher at 0° of hip flexion during isometric hip flexion.     

Discrete wavelet transform analysis of surface electromyography for the fatigue assessment of neck and shoulder muscles

Assessment of neuromuscular fatigue is essential for early detection and prevention of risks associated with work-related musculoskeletal disorders. In recent years, discrete wavelet transform (DWT) of surface electromyography (SEMG) has been used to evaluate muscle fatigue, especially during dynamic contractions when the SEMG signal is non-stationary. However, its application to the assessment of work-related neck and shoulder muscle fatigue is not well established. Therefore, the purpose of this study was to establish DWT analysis as a suitable method to conduct quantitative assessment of neck and shoulder muscle fatigue under dynamic repetitive conditions. Ten human participants performed 40 min of fatiguing repetitive arm and neck exertions while SEMG data from the upper trapezius and sternocleidomastoid muscles were recorded. The ten of the most commonly used wavelet functions were used to conduct the DWT analysis. Spectral changes estimated using power of wavelet coefficients in the 12–23 Hz frequency band showed the highest sensitivity to fatigue induced by the dynamic repetitive exertions. Although most of the wavelet functions tested in this study reasonably demonstrated the expected power trend with fatigue development and recovery, the overall performance of the “Rbio3.1” wavelet in terms of power estimation and statistical significance was better than the remaining nine wavelets.     

The relationship between muscle activation and shear elastic modulus of the sternocleidomastoid muscle during 3-D torque production

The sternocleidomastoid (SCM) is a primary neck torque generator, but the relationship between its muscle activation and shear elastic modulus during 3-D torque production is unknown. This study examined variations in neural control and shear elastic modulus of the SCM across various 3-D isometric torques. Our primary hypothesis was that the SCM would display similar preferred directions where muscle activity and shear elastic modulus were maximal during voluntary 3-D isometric torque production. Surface electromyography (EMG) and ultrasound shear wave elastography (SWE) data were collected from the SCM in 20 participants performing 3-D isometric target-matching at two different torque amplitudes. We used spherical statistics to compare the preferred directions calculated from the SWE and EMG data at 40% and 80% torque level during 3-D isometric torque production. We demonstrated a small but significant difference between EMG and SWE preferred directions, with the SWE preferred direction oriented more towards ipsilateral bending and less towards contralateral axial rotation than the preferred direction for the EMG data. We conclude that, although small differences exist, SCM shear elastic modulus is largely driven by activation during 3-D neck torques for healthy individuals.     

Voluntary activation of the trapezius muscle in cases with neck/shoulder pain compared to healthy controls

Subjects reporting neck/shoulder pain have been shown to generate less force during maximal voluntary isometric contractions (MVC) of the shoulder muscles compared to healthy controls. This has been suggested to be caused by a pain-related decrease in voluntary activation (VA) rather than lack of muscle mass. The aim of the present study was to investigate VA of the trapezius muscle during MVCs in subjects with and without neck/shoulder pain by use of the twitch interpolation technique.Ten cases suffering from pain and ten age and gender matched, healthy controls were included in the study. Upper trapezius muscle thickness was measured using ultrasonography and pain intensity was measured on a 100 mm visual analog scale (VAS). VA was calculated from five maximal muscle activation attempts. Superimposed stimuli were delivered to the accessory nerve at peak force and during a 2% MVC following the maximal contraction.Presented as mean ± SD for cases and controls, respectively: VAS; 16.0 ± 14.4 mm and 2.1 ± 4.1 mm (P = 0.004), MVC; 545 ± 161 N and 664 ± 195 N (P = 0.016), upper trapezius muscle thickness; 10.9 ± 1.9 mm and 10.4 ± 1.5 mm (P = 0.20), VA; 93.6 ± 14.2% and 96.3 ± 6.0% (P = 0.29).In spite of significantly eight-fold higher pain intensity and ∼20% lower MVC for cases compared to controls, no difference was found in VA. Possible explanations for the reduction in MVC could be differences in co-activation of antagonists and synergists as well as muscle quality.     

Shear wave elastography can assess the in-vivo nonlinear mechanical behavior of heel-pad

This study combines non-invasive mechanical testing with finite element (FE) modelling to assess for the first time the reliability of shear wave (SW) elastography for the quantitative assessment of the in-vivo nonlinear mechanical behavior of heel-pad. The heel-pads of five volunteers were compressed using a custom-made ultrasound indentation device. Tissue deformation was assessed from B-mode ultrasound and force was measured using a load cell to calculate the force – deformation graph of the indentation test. These results were used to design subject specific FE models and to inverse engineer the tissue’s hyperelastic material coefficients and its stress – strain behavior. SW speed was measured for different levels of compression (from 0% to 50% compression). SW speed for 0% compression was used to assess the initial stiffness of heel-pad (i.e. initial shear modulus, initial Young’s modulus). Changes in SW speed with increasing compressive loading were used to quantify the tissue’s nonlinear mechanical behavior based on the theory of acoustoelasticity. Statistical analysis of results showed significant correlation between SW-based and FE-based estimations of initial stiffness, but SW underestimated initial shear modulus by 64%(±16). A linear relationship was found between the SW-based and FE-based estimations of nonlinear behavior. The results of this study indicate that SW elastography is capable of reliably assessing differences in stiffness, but the absolute values of stiffness should be used with caution. Measuring changes in SW speed for different magnitudes of compression enables the quantification of the tissue’s nonlinear behavior which can significantly enhance the diagnostic value of SW elastography.     

A novel passive neck orthosis for patients with degenerative muscle diseases: Development & evaluation

The current study evaluated the effect of a passive neck orthosis, developed for patients suffering from progressive muscular diseases, on neck muscle activity in 10 adult healthy participants.The participants performed discrete head movements involving pure neck flexion (−10 to 30°), pure neck rotation (up to 30° left and right) and combined neck flexion-rotation (−10 to 30°) in steps of 10° by moving a cursor on a screen to reach predefined targets and staying on target for 10 s. Surface electromyography (EMG) was recorded from upper trapezius and sternocleidomastoid muscles and amplitudes were averaged over the static phases in trials with and without the orthosis. Moreover, the variability in head position and time required to perform the tasks were compared between conditions.Wearing the orthosis caused significant reductions (p = 0.027) in upper trapezius activity (a change of 0.2–1.5% EMGmax) while working against gravity. The activity level of the sternocleidomastoid muscle increased (p ≤ 0.025) by 0.3–1.0% EMGmax during pure and combined rotations without any pain reported.The orthosis showed potential to reduce the activity level of the upper trapezius muscle, the main load bearing muscle of the neck. Further study will be carried out to evaluate the effect in different patient groups.     

Quantifying extensibility of rotator cuff muscle with tendon rupture using shear wave elastography: A cadaveric study

Surgical repair for large rotator cuff tear remains challenging due to tear size, altered muscle mechanical properties, and poor musculotendinous extensibility. Insufficient extensibility might lead to an incomplete reconstruction; moreover, excessive stresses after repair may result in repair failure without healing. Therefore, estimates of extensibility of cuff muscles can help in pre-surgical planning to prevent unexpected scenarios during surgery. The purpose of this study was to determine if quantified mechanical properties of the supraspinatus muscle using shear wave elastography (SWE) could be used to predict the extensibility of the musculotendinous unit on cadaveric specimens. Forty-five fresh-frozen cadaveric shoulders (25 intact and 20 with rotator cuff tear) were used for the study. Passive stiffness of 4 anatomical regions in the supraspinatus muscle was first measured using SWE. After detaching the distal edge of supraspinatus muscle from other cuff muscles, the detached muscle was axially pulled with the scapula fixed. The correlation between the SWE modulus and the extensibility of the muscle under 30 and 60 N loads was assessed. There was a significant negative correlation between SWE measurements and the experimental extensibility. SWE modulus for the anterior-deep region in the supraspinatus muscle showed the strongest correlation with extensibility under 30 N (r = 0.70, P < 0.001) and 60 N (r = 0.68, P < 0.001). Quantitative SWE assessment for the supraspinatus muscle was highly correlated with extensibility of musculotendinous unit on cadaveric shoulders. This technique may be used to predict the extensibility for rotator cuff tears for pre-surgical planning.     

Flexion–relaxation ratio in computer workers with and without chronic neck pain

This study evaluated the flexion–relaxation phenomenon (FRP) and flexion–relaxation ratios (FR-ratios) using surface electromyography (sEMG) of the cervical extensor muscles of computer workers with and without chronic neck pain, as well as of healthy subjects who were not computer users. This study comprised 60 subjects 20–45 years of age, of which 20 were computer workers with chronic neck pain (CPG), 20 were computer workers without neck pain (NPG), and 20 were control individuals who do not use computers for work and use them less than 4 h/day for other purposes (CG). FRP and FR-ratios were analyzed using sEMG of the cervical extensors. Analysis of FR-ratios showed smaller values in the semispinalis capitis muscles of the two groups of workers compared to the control group. The reference FR-ratio (flexion relaxation ratio [FRR], defined as the maximum activity in 1 s of the re-extension/full flexion sEMG activity) was significantly higher in the computer workers with neck pain compared to the CG (CPG: 3.10, 95% confidence interval [CI95%] 2.50–3.70; NPG: 2.33, CI95% 1.93–2.74; CG: 1.99, CI95% 1.81–2.17; p < 0.001). The FR-ratios and FRR of sEMG in this study suggested that computer use could increase recruitment of the semispinalis capitis during neck extension (concentric and eccentric phases), which could explain our results. These results also suggest that the FR-ratios of the semispinalis may be a potential functional predictive neuromuscular marker of asymptomatic neck musculoskeletal disorders since even asymptomatic computer workers showed altered values. On the other hand, the FRR values of the semispinalis capitis demonstrated a good discriminative ability to detect neck pain, and such results suggested that each FR-ratio could have a different application.     

Differential effects of mental concentration and acute psychosocial stress on cervical muscle activity and posture

Physical and psychosocial stressors in the workplace have been independently associated with the development of neck pain, yet interactions among these risk factors remain unclear. The purpose of this study was to compare the effects of mentally challenging computer work performed with and without exposure to a psychosocial stressor on cervical muscle activity and posture. Changes in cervical posture and electromyography of upper trapezius, cervical extensor, and sternocleidomastoid muscles were compared between a resting seated posture at baseline, a low stress condition with mental concentration, and a high stress condition with mental concentration and psychosocial stress in sixty healthy office workers. Forward head posture significantly increased with mental concentration compared to baseline, but did not change with further introduction of the stressor. Muscle activity significantly increased from the low stress to high stress condition for both the dominant and non-dominant upper trapezius, with no corresponding change in activity of the cervical extensors or flexors between stress conditions. These findings suggest that upper trapezius muscles are selectively activated by psychosocial stress independent of changes in concentration or posture, which may have implications for the prevention of stress-related trapezius myalgia in the workplace.     

Specificity of resistance training responses in neck muscle size and strength

This study examined hypertrophy after head extension resistance training to assess which muscles of the complicated cervical neuromuscular system were used in this activity. We also determined if conventional resistance exercises, which are likely to evoke isometric action of the neck, induce generalized hypertrophy of the cervical muscle. Twenty-two active college students were studied. [mean (SE) age, weight and height: 21 (1) years, 71 (4) kg and 173 (3) cm, respectively]. Subjects were assigned to one of three groups: RESX (head extension exercise and other resistance exercises), RES (resistance exercises without specific neck exercise), or CON (no training). Groups RESX (n = 8) and RES (n = 6) trained 3 days/week for 12 weeks with large-muscle mass exercises (squat, deadlift, push press, bent row and mid-thigh pull). Group RESX also performed three sets of ten repetitions of a head extension exercise 3 days/week with a load equal to the 3 × 10 repetition maximum (RM). Group CON (n = 8) was a control group. The cross-sectional area (CSA) of nine individual muscles or muscle groups was determined by magnetic resonance imaging (MRI) of the cervical region. The CSA data were averaged over four contiguous transaxial slices in which all muscles of interest were visible. The 3 × 10 RM for the head extension exercise increased for RESX after training [from 17.9 (1.0) to 23.9 (1.4) kg, P < 0.05] but not for RES [from 17.6 (1.4) to 17.7 (1.9)␣kg] or CON [from 10.1 (2.2) to 10.3 (2.1) kg]. RESX showed an increase in total neck muscle CSA after training [from 19.5 (3.0) to 22.0 (3.6) cm², P < 0.05], but RES and CON did not [from 19.6 (2.9) to 19.7 (2.9)␣cm² and 17.0 (2.5) to 17.0 (2.4) cm², respectively]. This hypertrophy for RESX was due mainly to increases in CSA of 23.9 (3.2), 24.0 (5.8), and 24.9 (5.3)% for the splenius capitis, and semispinalis capitis and cervicis muscles, respectively. The lack of generalized neck muscle hypertrophy in RES was not due to insufficient training. For example, the CSA of their quadriceps femoris muscle group, as assessed by MRI, increased by 7 (1)% after this short-term training (P < 0.05). The results suggest that: (1) the splenius capitis, and semispinalis capitis and cervicis muscles are mainly responsible for head extension; (2) short-term resistance training does not provide a sufficient stimulus to evoke neck muscle hypertrophy unless specific neck exercises are performed; and (3) the postural role of head extensors provides modest loading in bipeds. Accepted: 15 October 1996