Myosin-X: a molecular motor at the cell's fingertips

Research in several areas, including unconventional myosins and deafness genes, has converged recently on a group of myosins whose tails contain myosin tail homology 4 (MyTH4) and band 4.1, ezrin, radixin, moesin (FERM) domains. Although these 'MyTH-FERM' myosins are not present in yeast and plants, they are present in slime molds, worms, flies and mammals, where they mediate interactions between the cytoskeleton and the plasma membrane. The most broadly distributed MyTH-FERM myosin in vertebrate cells appears to be myosin-X (Myo10). This myosin can act as a link to integrins and microtubules, stimulate the formation of filopodia and undergo a novel form of motility within filopodia.     

Comparative analysis of the MyTH4-FERM myosins reveals insights into the determinants of actin track selection in polarized epithelia

MyTH4-FERM (MF) myosins evolved to play a role in the creation and function of a variety of actin-based membrane protrusions that extend from cells. Here we performed an analysis of the MF myosins, Myo7A, Myo7B, and Myo10, to gain insight into how they select for their preferred actin networks. Using enterocytes that create spatially separated actin tracks in the form of apical microvilli and basal filopodia, we show that actin track selection is principally guided by the mode of oligomerization of the myosin along with the identity of the motor domain, with little influence from the specific composition of the lever arm. Chimeric variants of Myo7A and Myo7B fused to a leucine zipper parallel dimerization sequence in place of their native tails both selected apical microvilli as their tracks, while a truncated Myo10 used its native antiparallel coiled-coil to traffic to the tips of filopodia. Swapping lever arms between the Class 7 and 10 myosins did not change actin track preference. Surprisingly, fusing the motor-neck region of Myo10 to a leucine zipper or oligomerization sequences derived from the Myo7A and Myo7B cargo proteins USH1G and ANKS4B, respectively, re-encoded the actin track usage of Myo10 to apical microvilli with significant efficiency.     

Localization of a class III myosin to filopodia tips in transfected HeLa cells requires an actin-binding site in its tail domain

Bass Myo3A, a class III myosin, was expressed in HeLa cells as a GFP fusion in order to study its cellular localization. GFP-Myo3A localized to the cytoplasm and to the tips of F-actin bundles in filopodia, a localization that is consistent with the observed concentration toward the distal ends of F-actin bundles in photoreceptor cells. A mutation in the motor active site resulted in a loss of filopodia localization, suggesting that Myo3A motor activity is required for filopodial tip localization. Deletion analyses showed that the NH2-terminal kinase domain is not required but the CO2H-terminal 22 amino acids of the Myo3A tail are required for filopodial localization. Expression of this tail fragment alone produced fluorescence associated with F-actin throughout the cytoplasm and filopodia and a recombinant tail fragment bound to F-actin in vitro. An actin-binding motif was identified within this tail fragment, and a mutation within this motif abolished both filopodia localization by Myo3A and F-actin binding by the tail fragment alone. Calmodulin localized to filopodial tips when coexpressed with Myo3A but not in the absence of Myo3A, an observation consistent with the previous proposal that class III myosins bind calmodulin and thereby localize it in certain cell types.     

The UCS domain protein She4p binds to myosin motor domains and is essential for class I and class V myosin function

BACKGROUND: Myosins are motor proteins involved in processes like cell motility, vesicle transport, or cytokinesis. In a variety of organisms, a novel group of proteins forming the UCS (UNC-45/CRO1/SHE4) domain-containing family are essential for proper myosin function. The Saccharomyces cerevisae UCS domain protein She4p is involved in two myosin-requiring events, endocytosis and mRNA localization. RESULTS: In contrast to UCS domain proteins from other organisms that interact with class II myosins, we demonstrate that She4p associates with yeast class I and class V myosins. She4p binds to motor domains of class V myosin Myo4p and class I myosin Myo5p, and this binding depends on She4p's UCS domain. In vivo, She4p is essential for the function and localization of Myo3p, Myo4p, and Myo5p (but not of Myo2p) and for colocalization of class I myosins with cortical actin patches. In vitro, She4p stimulates binding of Myo5p to filamentous actin. Wild-type She4p, but not a mutant lacking the UCS domain, accumulates in a cap-like structure at the bud tip. This localization requires Myo2p and actin, suggesting a Myo2-dependent mechanism by which She4p is targeted to the bud cap. Localization of She4p is essential for proper positioning and myosin-actin association of cortical Myo5p. CONCLUSIONS: Our results suggest that She4p is a novel myosin motor domain binding protein and operates as a localized regulator of myosin function of class I and likely class V myosins.     

Myosin-X is an unconventional myosin that undergoes intrafilopodial motility

Filopodia are thin cellular protrusions that are important in cell motility and neuronal growth cone guidance. The actin filaments that make up the core of a filopodium undergo continuous retrograde flow towards the cell body. Surface receptors or particles can couple to this retrograde flow and can also move forward to the tips of filopodia, although the molecular basis of forward transport is unknown. We report here that myosin-X (Myo10 or M10), the founding member of a novel class of myosins, localizes to the tips of filopodia and undergoes striking forward and rearward movements within filopodia, which we term intrafilopodial motility. The movements of the GFP-M10 puncta correspond to forward and rearward movements of phase-dense granules along the filopodia. Finally, overexpressing full-length M10 (but not truncated forms of M10) causes an increase in the number and length of filopodia, indicating that M10 or its cargo may function in filopodial dynamics. The localization and movements of M10 strongly suggest that it functions as a motor for intrafilopodial motility.     

The Myosin IXb motor activity targets the myosin IXb RhoGAP domain as cargo to sites of actin polymerization

Myosin IXb (Myo9b) is a single-headed processive myosin that exhibits Rho GTPase-activating protein (RhoGAP) activity in its tail region. Using live cell imaging, we determined that Myo9b is recruited to extending lamellipodia, ruffles, and filopodia, the regions of active actin polymerization. A functional motor domain was both necessary and sufficient for targeting Myo9b to these regions. The head domains of class IX myosins comprise a large insertion in loop2. Deletion of the large Myo9b head loop 2 insertion abrogated the enrichment in extending lamellipodia and ruffles, but enhanced significantly the enrichment at the tips of filopodia and retraction fibers. The enrichment in the tips of filopodia and retraction fibers depended on four lysine residues C-terminal to the loop 2 insertion and the tail region. Fluorescence recovery after photobleaching and photoactivation experiments in lamellipodia revealed that the dynamics of Myo9b was comparable to that of actin. The exchange rates depended on the Myo9b motor region and motor activity, and they were also dependent on the turnover of F-actin. These results demonstrate that Myo9b functions as a motorized RhoGAP molecule in regions of actin polymerization and identify Myo9b head sequences important for in vivo motor properties.     

Myosin X regulates netrin receptors and functions in axonal path-finding

Netrins regulate axon path-finding during development, but the underlying mechanisms are not well understood. Here, we provide evidence for the involvement of the unconventional myosin X (Myo X) in netrin-1 function. We find that Myo X interacts with the netrin receptor deleted in colorectal cancer (DCC) and neogenin, a DCC-related protein. Expression of Myo X redistributes DCC to the cell periphery or to the tips of neurites, whereas its silencing prevents DCC distribution in neurites. Moreover, expression of DCC, but not neogenin, stimulates Myo X-mediated formation and elongation of filopodia, suggesting that Myo X function may be differentially regulated by DCC and neogenin. The involvement of Myo X in netrin-1 function was further supported by the effects of inhibiting Myo X function in neurons. Cortical explants derived from mouse embryos expressing a motor-less Myo X exhibit reduced neurite outgrowth in response to netrin-1 and chick commissural neurons expressing the motor-less Myo X, or in which Myo X is silenced using microRNA (miRNA), show impaired axon projection in vivo. Taken together, these results identify a novel role for Myo X in regulating netrin-1 function.     

Vav family proteins are required for optimal regulation of PLCgamma2 by integrin alphaIIbbeta3

Vav proteins belong to the family of guanine-nucleotide-exchange factors for the Rho/Rac family of small G-proteins. In addition, they serve as important adapter proteins for the activation of PLCgamma (phospholipase Cgamma) isoforms by ITAM (immunoreceptor tyrosine-based activation motif) receptors, including the platelet collagen receptor GPVI (glycoprotein VI). Vav proteins are also regulated downstream of integrins, including the major platelet integrin alphaIIbbeta3, which has recently been shown to regulate PLCgamma2. In the present study, we have investigated the role of Vav family proteins in filopodia and lamellipodia formation on fibrinogen using platelets deficient in Vav1 and Vav3. Wild-type mouse platelets undergo a limited degree of spreading on fibrinogen, characterized by the formation of numerous filopodia and limited lamellipodia structures. Platelets deficient in Vav1 and Vav3 exhibit reduced filopodia and lamellipodia formation during spreading on fibrinogen. This is accompanied by reduced alphaIIbbeta3-mediated PLCgamma2 tyrosine phosphorylation and reduced Ca(2+) mobilization. In contrast, the G-protein agonist thrombin stimulates full spreading of control and Vav1/3-deficient platelets. Consistent with this, stimulation of F-actin (filamentous actin) formation and Rac activation by thrombin is not altered in Vav-deficient cells. These results demonstrate that Vav1 and Vav3 are required for optimal spreading and regulation of PLCgamma2 by integrin alphaIIbbeta3, but that their requirement is by-passed upon G-protein receptor activation.     

Myosin 1G Is an Abundant Class I Myosin in Lymphocytes Whose Localization at the Plasma Membrane Depends on Its Ancient Divergent Pleckstrin Homology (PH) Domain (Myo1PH)

Class I myosins, which link F-actin to membrane, are largely undefined in lymphocytes. Mass spectrometric analysis of lymphocytes identified two short tail forms: (Myo1G and Myo1C) and one long tail (Myo1F). We investigated Myo1G, the most abundant in T-lymphocytes, and compared key findings with Myo1C and Myo1F. Myo1G localizes to the plasma membrane and associates in an ATP-releasable manner to the actin-containing insoluble pellet. The IQ+tail region of Myo1G (Myo1C and Myo1F) is sufficient for membrane localization, but membrane localization is augmented by the motor domain. The minimal region lacks IQ motifs but includes: 1) a PH-like domain; 2) a “Pre-PH” region; and 3) a “Post-PH” region. The Pre-PH predicted α helices may contribute electrostatically, because two conserved basic residues on one face are required for optimal membrane localization. Our sequence analysis characterizes the divergent PH domain family, Myo1PH, present also in long tail myosins, in eukaryotic proteins unrelated to myosins, and in a probable ancestral protein in prokaryotes. The Myo1G Myo1PH domain utilizes the classic lipid binding site for membrane association, because mutating either of two basic residues in the “signature motif” destroys membrane localization. Mutation of each basic residue of the Myo1G Myo1PH domain reveals another critical basic residue in the β3 strand, which is shared only by Myo1D. Myo1G differs from Myo1C in its phosphatidylinositol 4,5-bisphosphate dependence for membrane association, because membrane localization of phosphoinositide 5-phosphatase releases Myo1C from the membrane but not Myo1G. Thus Myo1PH domains likely play universal roles in myosin I membrane association, but different isoforms have diverged in their binding specificity.     

The Loop2 Insertion of Type IX Myosin Acts as an Electrostatic Actin Tether that Permits Processive Movement

Although class IX myosins are single-headed, they demonstrate characteristics of processive movement along actin filaments. Double-headed myosins that move processively along actin filaments achieve this by successive binding of the two heads in a hand-over-hand mechanism. This mechanism, obviously, cannot operate in single-headed myosins. However, it has been proposed that a long class IX specific insertion in the myosin head domain at loop2 acts as an F-actin tether, allowing for single-headed processive movement. Here, we tested this proposal directly by analysing the movement of deletion constructs of the class IX myosin from Caenorhabditis elegans (Myo IX). Deletion of the large basic loop2 insertion led to a loss of processive behaviour, while deletion of the N-terminal head extension, a second unique domain of class IX myosins, did not influence the motility of Myo IX. The processive behaviour of Myo IX is also abolished with increasing salt concentrations. These observations directly demonstrate that the insertion located in loop2 acts as an electrostatic actin tether during movement of Myo IX along the actin track.     

Kinetic mechanism of myosin IXB and the contributions of two class IX-specific regions

Myosin IXb (Myo9b) was reported to be a single-headed, processive myosin. In its head domain it contains an N-terminal extension and a large loop 2 insertion that are specific for class IX myosins. We characterized the kinetic properties of purified, recombinant rat Myo9b, and we compared them with those of Myo9b mutants that had either the N-terminal extension or the loop 2 insertion deleted. Unlike other processive myosins, Myo9b exhibited a low affinity for ADP, and ADP release was not rate-limiting in the ATPase cycle. Myo9b is the first myosin for which ATP hydrolysis or an isomerization step after ATP binding is rate-limiting. Myo9b-ATP appeared to be in a conformation with a weak affinity for actin as determined by pyrene-actin fluorescence. However, in actin cosedimentation experiments, a subpopulation of Myo9b-ATP bound F-actin with a remarkably high affinity. Deletion of the N-terminal extension reduced actin affinity and increased the rate of nucleotide binding. Deletion of the loop 2 insertion reduced the actin affinity and altered the communication between actin and nucleotide-binding sites.     

Different degrees of lever arm rotation control myosin step size

Myosins are actin-based motors that are generally believed to move by amplifying small structural changes in the core motor domain via a lever arm rotation of the light chain binding domain. However, the lack of a quantitative agreement between observed step sizes and the length of the proposed lever arms from different myosins challenges this view. We analyzed the step size of rat myosin 1d (Myo1d) and surprisingly found that this myosin takes unexpectedly large steps in comparison to other myosins. Engineering the length of the light chain binding domain of rat Myo1d resulted in a linear increase of step size in relation to the putative lever arm length, indicative of a lever arm rotation of the light chain binding domain. The extrapolated pivoting point resided in the same region of the rat Myo1d head domain as in conventional myosins. Therefore, rat Myo1d achieves its larger working stroke by a large calculated approximately 90 degrees rotation of the light chain binding domain. These results demonstrate that differences in myosin step sizes are not only controlled by lever arm length, but also by substantial differences in the degree of lever arm rotation.     

Myosin-1A targets to microvilli using multiple membrane binding motifs in the tail homology 1 (TH1) domain

One of the most abundant components of the enterocyte brush border is the actin-based monomeric motor, myosin-1a (Myo1a). Within brush border microvilli, Myo1a carries out a number of critical functions at the interface between membrane and actin cytoskeleton. Proper physiological function of Myo1a depends on its ability to bind to microvillar membrane, an interaction mediated by a C-terminal tail homology 1 (TH1) domain. However, little is known about the mechanistic details of the Myo1a-TH1/membrane interaction. Structure-function analysis of Myo1a-TH1 targeting in epithelial cells revealed that an N-terminal motif conserved among class I myosins and a C-terminal motif unique to Myo1a-TH1 are both required for steady state microvillar enrichment. Purified Myo1a bound to liposomes composed of phosphatidylserine and phosphoinositol 4,5-bisphosphate, with moderate affinity in a charge-dependent manner. Additionally, peptides of the N- and C-terminal regions required for targeting were able to compete with Myo1a for binding to highly charged liposomes in vitro. Single molecule total internal reflection fluorescence microscopy showed that these motifs are also necessary for slowing the membrane detachment rate in cells. Finally, Myo1a-TH1 co-localized with both lactadherin-C2 (a phosphatidylserine-binding protein) and PLCδ1-PH (a phosphoinositol 4,5-bisphosphate-binding protein) in microvilli, but only lactaderin-C2 expression reduced brush border targeting of Myo1a-TH1. Together, our results suggest that Myo1a targeting to microvilli is driven by membrane binding potential that is distributed throughout TH1 rather than localized to a single motif. These data highlight the diversity of mechanisms that enable different class I myosins to target membranes in distinct biological contexts.     

The interaction between uPAR and vitronectin triggers ligand‐independent adhesion signalling by integrins

The urokinase‐type plasminogen activator receptor (uPAR) is a non‐integrin vitronectin (VN) cell adhesion receptor linked to the plasma membrane by a glycolipid anchor. Through structure–function analyses of uPAR, VN and integrins, we document that uPAR‐mediated cell adhesion to VN triggers a novel type of integrin signalling that is independent of integrin–matrix engagement. The signalling is fully active on VN mutants deficient in integrin binding site and is also efficiently transduced by integrins deficient in ligand binding. Although integrin ligation is dispensable, signalling is crucially dependent upon an active conformation of the integrin and its association with intracellular adaptors such as talin. This non‐canonical integrin signalling is not restricted to uPAR as it poses no structural constraints to the receptor mediating cell attachment. In contrast to canonical integrin signalling, where integrins form direct mechanical links between the ECM and the cytoskeleton, the molecular mechanism enabling the crosstalk between non‐integrin adhesion receptors and integrins is dependent upon membrane tension. This suggests that for this type of signalling, the membrane represents a critical component of the molecular clutch.     

Interaction of the endocytic scaffold protein Pan1 with the type I myosins contributes to the late stages of endocytosis

The yeast endocytic scaffold Pan1 contains an uncharacterized proline-rich domain (PRD) at its carboxy (C)-terminus. We report that the pan1-20 temperature-sensitive allele has a disrupted PRD due to a frame-shift mutation in the open reading frame of the domain. To reveal redundantly masked functions of the PRD, synthetic genetic array screens with a pan1DeltaPRD strain found genetic interactions with alleles of ACT1, LAS17 and a deletion of SLA1. Through a yeast two-hybrid screen, the Src homology 3 domains of the type I myosins, Myo3 and Myo5, were identified as binding partners for the C-terminus of Pan1. In vitro and in vivo assays validated this interaction. The relative timing of recruitment of Pan1-green fluorescent protein (GFP) and Myo3/5-red fluorescent protein (RFP) at nascent endocytic sites was revealed by two-color real-time fluorescence microscopy; the type I myosins join Pan1 at cortical patches at a late stage of internalization, preceding the inward movement of Pan1 and its disassembly. In cells lacking the Pan1 PRD, we observed an increased lifetime of Myo5-GFP at the cortex. Finally, Pan1 PRD enhanced the actin polymerization activity of Myo5-Vrp1 complexes in vitro. We propose that Pan1 and the type I myosins interactions promote an actin activity important at a late stage in endocytic internalization.     

Sequential roles for myosin-X in BMP6-dependent filopodial extension, migration, and activation of BMP receptors

Endothelial cell migration is an important step during angiogenesis, and its dysregulation contributes to aberrant neovascularization. The bone morphogenetic proteins (BMPs) are potent stimulators of cell migration and angiogenesis. Using microarray analyses, we find that myosin-X (Myo10) is a BMP target gene. In endothelial cells, BMP6-induced Myo10 localizes in filopodia, and BMP-dependent filopodial assembly decreases when Myo10 expression is reduced. Likewise, cellular alignment and directional migration induced by BMP6 are Myo10 dependent. Surprisingly, we find that Myo10 and BMP6 receptor ALK6 colocalize in a BMP6-dependent fashion. ALK6 translocates into filopodia after BMP6 stimulation, and both ALK6 and Myo10 possess intrafilopodial motility. Additionally, Myo10 is required for BMP6-dependent Smad activation, indicating that in addition to its function in filopodial assembly, Myo10 also participates in a requisite amplification loop for BMP signaling. Our data indicate that Myo10 is required to guide endothelial migration toward BMP6 gradients via the regulation of filopodial function and amplification of BMP signals.     

Myosin surface loop 4 modulates inhibition of actomyosin 1b ATPase activity by tropomyosin

Structural studies of the class I myosin, MyoE, led to the predictions that loop 4, a surface loop near the actin-binding region that is longer in class I myosins than in other myosin subclasses, might limit binding of myosins I to actin when actin-binding proteins, like tropomyosin, are present, and might account for the exclusion of myosin I from stress fibers. To test these hypotheses, mutant molecules of the related mammalian class I myosin, Myo1b, in which loop 4 was truncated (from an amino acid sequence of RMNGLDES to NGLD) or replaced with the shorter and distinct loop 4 found in Dictyostelium myosin II (GAGEGA), were expressed in vitro and their interaction with actin and with actin-tropomyosin was tested. Saturating amounts of expressed fibroblast tropomyosin-2 resulted in a decrease in the maximum actin-activated Mg2+-ATPase activity of wild-type Myo1b but had little or no effect on the actin-activated Mg2+-ATPase activity of the two mutants. In motility assays, few actin filaments bound tightly to Myo1b-WT-coated cover slips when tropomyosin-2 was present, whereas actin filaments both bound and were translocated by Myo1b-NGLD or Myo1b-GAGEGA in both the presence and absence of tropomyosin-2. When expressed in mammalian cells, like the wild type, the mutant myosins were largely excluded from tropomyosin-containing actin filaments, indicating that in the cell additional factors besides loop 4 determine targeting of myosins I to specific subpopulations of actin filaments.     

A model of stereocilia adaptation based on single molecule mechanical studies of myosin I

We have used an optical tweezers-based apparatus to perform single molecule mechanical experiments using the unconventional myosins, Myo1b and Myo1c. The single-headed nature and slow ATPase kinetics of these myosins make them ideal for detailed studies of the molecular mechanism of force generation by acto-myosin. Myo1c exhibits several features that have not been seen using fast skeletal muscle myosin II. (i) The working stroke occurs in two, distinct phases, producing an initial 3 nm and then a further 1.5 nm of movement. (ii) Two types of binding interaction were observed: short-lived ATP-independent binding events that produced no movement and longer-lived, ATP-dependent events that produced a full working stroke. The stiffness of both types of interaction was similar. (iii) In a new type of experiment, using feedback to apply controlled displacements to a single acto-myosin cross-bridge, we found abrupt changes in force during attachment of the acto-Myo1b cross-bridge, a result that is consistent with the classical 'T2' behaviour of single muscle fibres. Given that these myosins might exhibit the classical T2 behaviour, we propose a new model to explain the slow phase of sensory adaptation of the hair cells of the inner ear.     

The yeast class V myosins, Myo2p and Myo4p, are nonprocessive actin-based motors

The motor properties of the two yeast class V myosins, Myo2p and Myo4p, were examined using in vitro motility assays. Both myosins are active motors with maximum velocities of 4.5 microm/s for Myo2p and 1.1 microm/s for Myo4p. Myo2p motility is Ca(2+) insensitive. Both myosins have properties of a nonprocessive motor, unlike chick myosin-Va (M5a), which behaves as a processive motor when assayed under identical conditions. Additional support for the idea that Myo2p is a nonprocessive motor comes from actin cosedimentation assays, which show that Myo2p has a low affinity for F-actin in the presence of ATP and Ca(2+), unlike chick brain M5a. These studies suggest that if Myo2p functions in organelle transport, at least five molecules of Myo2p must be present per organelle to promote directed movement.