Importance of product/reactant equilibration in the kinetics of the phosphoglucose isomerization reaction by differential stopped flow microcalorimetry

The kinetics for the isomerization of fructose-6-phosphate to glucose-6-phosphate (F6P --> G6P) by baker's yeast phosphoglucose isomerase (PGI) with regard to k(cat) and K(m) were determined from analysis of differential stopped flow microcalorimeter measurements using the integrated form of the Michaelis-Menten rate equation. Values for K(m) (F6P --> G6P) that were determined at pH 8.0 and ionic strength 0.1M at 293.4, 298.4, 303.4, and 311.5K exhibited a linear dependence on the substrate concentration at each temperature because of the substrate-product equilibrium. The minimum values for K(m) ranged from 2.62+/-0.55 mM at 293.4K to 7.8+/-4.8mM at 311.5K and were the same as the minimum values for the reverse reaction (G6P --> F6P) at 293.4 K and 298.4 K. Minimum values for k(cat) increased with temperature, from 2.78+/-0.34s(-1) at 293.4K to 11.4+/-1.0s(-1) at 311.5K, and for the reverse reaction, G6P --> F6P, from 0.852+/-0.086 s(-1) at 293.4K to 1.46+/-0.06s(-1) at 298.4K. The enzyme efficiency at 311.5K is close to the collision rate for a diffusion-controlled process in solution. The [F6P]/[G6P] equilibrium constants were determined from comparison of the values of k(cat) in both directions and were 0.307+/-0.053 at 293.4K and 0.395+/-0.033 at 298.4K. The heats of reaction in the F6P --> G6P direction increased from -8.96+/-0.26 kJmol(-1) at 311.5K to -8.27+/-0.40 kJmol(-1) at 293.4K, a value in fair agreement with 7.01+/-0.32 kJmol(-1) in the opposite G6P --> F6P direction.     

Kinetics of the hydrolysis of N-benzoyl-l-serine methyl ester catalysed by bromelain and by papain. Analysis of modifier mechanisms by lattice nomography, computational methods of parameter evaluation for substrate-activated catalyses and consequences of postulated non-productive binding in bromelain- and papain-catalysed hydrolyses

1. N-Benzoyl-l-serine methyl ester was synthesized and evaluated as a substrate for bromelain (EC 3.4.22.4) and for papain (EC 3.4.22.2). 2. For the bromelain-catalysed hydrolysis at pH7.0, plots of [S(0)]/v(i) (initial substrate concn./initial velocity) versus [S(0)] are markedly curved, concave downwards. 3. Analysis by lattice nomography of a modifier kinetic mechanism in which the modifier is substrate reveals that concave-down [S(0)]/v(i) versus [S(0)] plots can arise when the ratio of the rate constants that characterize the breakdown of the binary (ES) and ternary (SES) complexes is either less than or greater than 1. In the latter case, there are severe restrictions on the values that may be taken by the ratio of the dissociation constants of the productive and non-productive binary complexes. 4. Concave-down [S(0)]/v(i) versus [S(0)] plots cannot arise from compulsory substrate activation. 5. Computational methods, based on function minimization, for determination of the apparent parameters that characterize a non-compulsory substrate-activated catalysis are described. 6. In an attempt to interpret the catalysis by bromelain of the hydrolysis of N-benzoyl-l-serine methyl ester in terms of substrate activation, the general substrate-activation model was simplified to one in which only one binary ES complex (that which gives rise directly to products) can form. 7. In terms of this model, the bromelain-catalysed hydrolysis of N-benzoyl-l-serine methyl ester at pH7.0, I=0.1 and 25 degrees C is characterized by K(m) (1) (the dissociation constant of ES)=1.22+/-0.73mm, k (the rate constant for the breakdown of ES to E+products, P)=1.57x10(-2)+/-0.32x10(-2)s(-1), K(a) (2) (the dissociation constant that characterizes the breakdown of SES to ES and S)=0.38+/-0.06m, and k' (the rate constant for the breakdown of SES to E+P+S)=0.45+/-0.04s(-1). 8. These parameters are compared with those in the literature that characterize the bromelain-catalysed hydrolysis of alpha-N-benzoyl-l-arginine ethyl ester and of alpha-N-benzoyl-l-arginine amide; K(m) (1) and k for the serine ester hydrolysis are somewhat similar to K(m) and k(cat.) for the arginine amide hydrolysis and K(as) and k' for the serine ester hydrolysis are somewhat similar to K(m) and k(cat.) for the arginine ester hydrolysis. 9. A previous interpretation of the inter-relationships of the values of k(cat.) and K(m) for the bromelain-catalysed hydrolysis of the arginine ester and amide substrates is discussed critically and an alternative interpretation involving substantial non-productive binding of the arginine amide substrate to bromelain is suggested. 10. The parameters for the bromelain-catalysed hydrolysis of the serine ester substrate are tentatively interpreted in terms of non-productive binding in the binary complex and a decrease of this type of binding by ternary complex-formation. 11. The Michaelis parameters for the papain-catalysed hydrolysis of the serine ester substrate (K(m)=52+/-4mm, k(cat.)=2.80+/-0.1s(-1) at pH7.0, I=0.1, 25.0 degrees C) are similar to those for the papain-catalysed hydrolysis of methyl hippurate. 12. Urea and guanidine hydrochloride at concentrations of 1m have only small effects on the kinetic parameters for the hydrolysis of the serine ester substrate catalysed by bromelain and by papain.     

Kinetics of substrate transglycosylation by glycoside hydrolase family 3 glucan (1-->3)-beta-glucosidase from the white-rot fungus Phanerochaete chrysosporium

To elucidate the interaction between substrate inhibition and substrate transglycosylation of retaining glycoside hydrolases (GHs), a steady-state kinetic study was performed for the GH family 3 glucan (1-->3)-beta-glucosidase from the white-rot fungus Phanerochaete chrysosporium, using laminarioligosaccharides as substrates. When laminaribiose was incubated with the enzyme, a transglycosylation product was detected by thin-layer chromatography. The product was purified by size-exclusion chromatography, and was identified as a 6-O-glucosyl-laminaribiose (beta-D-Glcp-(1-->6)-beta-D-Glcp-(1-->3)-D-Glc) by 1H NMR spectroscopy and electrospray ionization mass spectrometry analysis. In steady-state kinetic studies, an apparent decrease of laminaribiose hydrolysis was observed at high concentrations of the substrate, and the plots of glucose production versus substrate concentration were thus fitted to a modified Michaelis-Menten equation including hydrolytic and transglycosylation parameters (K(m), K(m2), k(cat), k(cat2)). The rate of 6-O-glucosyl-laminaribiose production estimated by high-performance anion-exchange chromatography coincided with the theoretical rate calculated using these parameters, clearly indicating that substrate inhibition of this enzyme is fully explained by substrate transglycosylation. Moreover, when K(m), k(cat), and affinity for glucosyl-enzyme intermediates (K(m2)) were estimated for laminarioligosaccharides (DP=3-5), the K(m) value of laminaribiose was approximately 5-9 times higher than those of the other oligosaccharides (DP=3-5), whereas the K(m2) values were independent of the DP of the substrates. The kinetics of transglycosylation by the enzyme could be well interpreted in terms of the subsite affinities estimated from the hydrolytic parameters (K(m) and k(cat)), and a possible mechanism of transglycosylation is proposed.     

Microscopic rate-constants for substrate binding and acylation in cold-adaptation of trypsin I from Atlantic cod

Temperature imposes limits on where life can thrive and this is evident in the evolution of the basic structural properties of proteins. Cold-adaptation of enzymes is one example, where the catalytic rate constant (k(cat)) is increased compared with hot-acclimated homologous under identical assay conditions. Trypsin I from Atlantic cod (Gadus morhua) has catalytic efficiency (k(cat)/K(m)) for amide hydrolysis that is 17-fold larger than observed for bovine trypsin. Here, the individual rate-constants for association of substrate (k(1)), dissociation of substrate (k(-1)), and acylation of the enzyme (k(2)) have been determined using benzoyl-Arg-p-nitroanilide or benzyloxycarbonyl-Gly-Pro-Arg-p-nitroanilide as substrates. Rather unexpectedly, by far the largest difference (37-fold increase) was observed in k(1), the rate constant for binding of substrate. The cold-adaptation of the dissociation and catalytic steps were not as prominent (increased by 3.7-fold). The length of substrate did have an effect by increasing the reaction rate by 70-fold, and again, the step most affected was the initial binding-step.     

Assay for glucose oxidase from Aspergillus niger and Penicillium amagasakiense by Fourier transform infrared spectroscopy

A simple and direct assay method for glucose oxidase (EC 1.1.3.4) from Aspergillus niger and Penicillium amagasakiense was investigated by Fourier transform infrared spectroscopy. This enzyme catalyzed the oxidation of d-glucose at carbon 1 into d-glucono-1,5-lactone and hydrogen peroxide in phosphate buffer in deuterium oxide ((2)H(2)O). The intensity of the d-glucono-1,5-lactone band maximum at 1212 cm(-1) due to CO stretching vibration was measured as a function of time to study the kinetics of d-glucose oxidation. The extinction coefficient epsilon of d-glucono-1,5-lactone was determined to be 1.28 mM(-1)cm(-1). The initial velocity is proportional to the enzyme concentration by using glucose oxidase from both A. niger and P. amagasakiense either as cell-free extracts or as purified enzyme preparations. The kinetic constants (V(max), K(m), k(cat), and k(cat)/K(m)) determined by Lineweaver-Burk plot were 433.78+/-59.87U mg(-1) protein, 10.07+/-1.75 mM, 1095.07+/-151.19s(-1), and 108.74 s(-1)mM(-1), respectively. These data are in agreement with the results obtained by a spectrophotometric method using a linked assay based on horseradish peroxidase in aqueous media: 470.36+/-42.83U mg(-1) protein, 6.47+/-0.85 mM, 1187.77+/-108.16s(-1), and 183.58 s(-1)mM(-1) for V(max), K(m), k(cat), and k(cat)/K(m), respectively. Therefore, this spectroscopic method is highly suited to assay for glucose oxidase activity and its kinetic parameters by using either cell-free extracts or purified enzyme preparations with an additional advantage of performing a real-time measurement of glucose oxidase activity.     

Catalytic reaction pathway for the mitogen-activated protein kinase ERK2

The structural, functional, and regulatory properties of the mitogen-activated protein kinases (MAP kinases) have long attracted considerable attention owing to the critical role that these enzymes play in signal transduction. While several MAP kinase X-ray crystal structures currently exist, there is by comparison little mechanistic information available to correlate the structural data with the known biochemical properties of these molecules. We have employed steady-state kinetic and solvent viscosometric techniques to characterize the catalytic reaction pathway of the MAP kinase ERK2 with respect to the phosphorylation of a protein substrate, myelin basic protein (MBP), and a synthetic peptide substrate, ERKtide. A minor viscosity effect on k(cat) with respect to the phosphorylation of MBP was observed (k(cat) = 10 +/- 2 s(-1), k(cat)(eta) = 0.18 +/- 0.05), indicating that substrate processing occurs via slow phosphoryl group transfer (12 +/- 4 s(-1)) followed by the faster release of products (56 +/- 4 s(-1)). At an MBP concentration extrapolated to infinity, no significant viscosity effect on k(cat)/K(m(ATP)) was observed (k(cat)/K(m(ATP)) = 0.2 +/- 0.1 microM(-1) s(-1), k(cat)/K(m(ATP))(eta) = -0.08 +/- 0.04), consistent with rapid-equilibrium binding of the nucleotide. In contrast, at saturating ATP, a full viscosity effect on k(cat)/K(m) for MBP was apparent (k(cat)/K(m(MBP)) = 2.4 +/- 1 microM(-1) s(-1), k(cat)/K(m(MBP))(eta) = 1.0 +/- 0.1), while no viscosity effect was observed on k(cat)/K(m) for the phosphorylation of ERKtide (k(cat)/K(m(ERKtide)) = (4 +/- 2) x 10(-3) microM(-1) s(-1), k(cat)/K(m(ERKtide))(eta) = -0.02 +/- 0.02). This is consistent with the diffusion-limited binding of MBP, in contrast to the rapid-equilibrium binding of ERKtide, to form the ternary Michaelis complex. Calculated values for binding constants show that the estimated value for K(d(MBP)) (/= 1.5 mM). The dramatically higher catalytic efficiency of MBP in comparison to that of ERKtide ( approximately 600-fold difference) is largely attributable to the slow dissociation rate of MBP (/=56 s(-1)), from the ERK2 active site.     

Substrate specificity of penicillin acylase from Streptomyces lavendulae

The kinetic parameters of several substrates of penicillin acylase from Streptomyces lavendulae have been determined. The enzyme hydrolyses phenoxymethyl penicillin (penicillin V) and other penicillins with aliphatic acyl-chains such as penicillin F, dihydroF, and K. The best substrate was penicillin K (octanoyl penicillin) with a k(cat)/K(m) of 165.3 mM(-1) s(-1). The enzyme hydrolyses also chromogenic substrates as NIPOAB (2-nitro-5-phenoxyacetamido benzoic acid), NIHAB (2-nitro-5-hexanoylamido benzoic acid) or NIOAB (2-nitro-5-octanoylamido benzoic acid), however failed to hydrolyse phenylacetil penicillin (penicillin G) or NIPAB (2-nitro-5-phenylacetamido benzoic acid) and penicillins with polar substituents in the acyl moiety. These results suggest that the structure of the acyl moiety of the substrate is more determinant than the amino moiety for enzyme specificity. The enzyme was inhibited by several organic acids and the extent of inhibition changed with the hydrophobicity of the acid. The best inhibitor was octanoic acid with a K(i) of 0.8 mM. All the results, taking together, point to an active site highly hydrophobic for this penicillin acylase from Streptomyces lavendulae.     

Biochemical analysis of the substrate specificity of the beta-ketoacyl-acyl carrier protein synthase domain of module 2 of the erythromycin polyketide synthase

The beta-ketoacyl-acyl carrier protein synthase (KS) domain of the modular 6-deoxyerythronolide B synthase (DEBS) catalyzes the fundamental chain building reaction of polyketide biosynthesis. The KS-catalyzed reaction involves two discrete steps consisting of formation of an acyl-enzyme intermediate generated from the incoming acylthioester substrate and an active site cysteine residue, and the conversion of this intermediate to the beta-ketoacyl-acyl carrier protein product by a decarboxylative condensation with a paired methylmalonyl-SACP. We have determined the rate constants for the individual biochemical steps by a combination of protein acylation and transthioesterification experiments. The first-order rate constant (k(2)) for formation of the acyl-enzyme intermediate from [1-(14)C]-(2S,3R)-2-methyl-3-hydroxypentanoyl-SNAC (2) and recombinant DEBS module 2 is 5.8 +/- 2.6 min(-)(1), with a dissociation constant (K(S)) of 3.5 +/- 2.8 mM. The acyl-enzyme adduct was formed at a near-stoichiometric ratio of approximately 0.8:1. Transthioesterification between unlabeled diketide-SNAC 2 and N-[1-(14)C-acetyl]cysteamine gave a k(exch) of 0.15 +/- 0.06 min(-)(1), with a K(m) for HSNAC of 5.7 +/- 4.9 mM and a K(m) for 2 of 5.3 +/- 0.9 mM. Under the conditions that were used, k(exch) was equal to k(-)(2), the first-order rate constant for reversal of the acyl-enzyme-forming reaction. Since the rate of the decarboxylative condensation is much greater that the rate of reversion to the starting material (k(3) > k(-)(2)), formation of the acyl-enzyme adduct is effectively irreversible, thereby establishing that the observed value of the specificity constant (k(cat)/K(m)) is solely a reflection of the intrinsic substrate specificity of the KS-catalyzed acyl-enzyme-forming reaction. These findings were also extended to a panel of diketide- and triketide-SNAC analogues, revealing that some substrate analogues that are not converted to product by DEBS module 2 form dead-end acyl-enzyme intermediates.     

Analyzing the catalytic mechanism of the Fe-type nitrile hydratase from Comamonas testosteroni Ni1

In order to gain insight into the catalytic mechanism of Fe-type nitrile hydratases (NHase), the pH and temperature dependence of the kinetic parameters k cat, K m, and k cat/ K m along with the solvent isotope effect were examined for the Fe-type NHase from Comamonas testosteroni Ni1 ( CtNHase). CtNHase was found to exhibit a bell-shaped curve for plots of relative activity vs pH over pH values 4-10 for the hydration of acrylonitrile and was found to display maximal activity at pH approximately 7.2. Fits of these data provided a p K ES1 value of 6.1 +/- 0.1, a p K ES2 value of 9.1 +/- 0.2 ( k' cat = 10.1 +/- 0.3 s (-1)), a p K E1 value of 6.2 +/- 0.1, and a p K E2 value of 9.2 +/- 0.1 ( k' cat/ K' m of 2.0 +/- 0.2 s (-1) mM (-1)). Proton inventory studies indicate that two protons are transferred in the rate-limiting step of the reaction at pH 7.2. Since CtNHase is stable to 25 degrees C, an Arrhenius plot was constructed by plotting ln( k cat) vs 1/ T, providing an E a of 33.3 +/- 1.5 kJ/mol. Delta H degrees of ionization values were also determined, thus helping to identify the ionizing groups exhibiting the p K ES1 and p K ES2 values. Based on Delta H degrees ion data, p K ES1 is assigned to betaTyr68 while p K ES2 is assigned to betaArg52, betaArg157, or alphaSer116 (NHases are alpha 2beta 2 heterotetramers). Given the strong similarities in the kinetic data obtained for both Co- and Fe-type NHase enzymes, both types of NHase enzymes likely hydrate nitriles in a similar fashion.     

Kinetic and biochemical analysis of the mechanism of action of lysine 5,6-aminomutase

Lysine 5,6-aminomutase (5,6-LAM) catalyzes the reversible and nearly isoenergetic transformations of D-lysine into 2,5-diaminohexanoate (2,5-DAH) and of L-beta-lysine into 3,5-diaminohexanoate (3,5-DAH). The activity of 5,6-LAM depends on pyridoxal-5(')-phosphate (PLP) and adenosylcobalamin. The currently postulated multistep mechanism involves at least 12 steps, two of which involve hydrogen transfer. The deuterium kinetic isotope effects on k(cat) and k(cat)/K(m) have been found to be 10.4+/-0.3 and 8.3+/-1.9, respectively, in the reaction of DL-lysine-3,3,4,4,5,5,6,6-d(8). The corresponding isotope effects for reaction of DL-lysine-4,4,5,5-d(4) are 8.5+/-0.7 and 7.1+/-1.2, respectively. Neither cob(II)alamin nor a free radical can be detected in the steady state by UV-Vis spectrophotometry or electron paramagnetic resonance (EPR) spectroscopy. Therefore, hydrogen abstraction from carbon-5 of the substrate side chain is rate limiting in the mechanism. DL-4-Oxalysine is an alternative substrate for 5,6-LAM. DL-4-Oxalysine reacts irreversibly because the product breaks down into ammonia, acetaldehyde, and DL-serine. The value of K(m) for the reaction of DL-4-oxalysine is lower than that for DL-lysine and that of k(cat) for DL-4-oxalysine is slightly lower than that for DL-lysine. As measured by values of k(cat)/K(m), 5,6-LAM uses DL-4-oxalysine essentially as efficiently as the best substrates, D-lysine and L-beta-lysine, and more efficiently than DL-lysine. DL-4-Oxalysine induces the same suicide inactivation by electron transfer as do the biological substrates. The putative substrate-related radical intermediate is not sufficiently stabilized by the nonbonding 4-oxa electrons to be detectable by EPR spectroscopy.     

A fluorimetric method for the determination of pepsin activity

An intramolecularly quenched fluorogenic peptide containing o-aminobenzoyl (Abz) and ethylenediamine 2,4-dinitrophenyl (Eddnp) groups at amino- and carboxyl-terminal amino acid residues, Abz-Lys-Pro-Ile-Glu-Phe-Phe-Arg-Leu-Eddnp, was hydrolyzed by purified human pepsin, gastricsin, and gastric juice uniquely at the Phe-Phe bond. Kinetic parameters determined for purified pepsin were K(m)=0.68+/-0.11 microM; k(cat)=6.3+/-0.16s(-1); k(cat)/K(m)=9.26s(-1) microM(-1); Gastricsin showed K(m)=2.69+/-0.18 microM; k(cat)=0.03+/-0.005s(-1); k(cat)/K(m)=0.011s(-1) microM(-1). Gastric juice (21 samples) from subjects without gastric disorders at endoscopy examination showed activities varying from 0.0008 to 9.72 micromolml(-1)min(-1). Pepstatin A inhibition of gastric juice enzymatic activity was complete at 3.4x10(-5)M (final concentration) inhibitor. In the proposed method the presence of a unique scissile bond in the synthetic substrate provides a direct ratio between enzymatic activity and amount of substrate hydrolyzed, and a unique step reaction facilitates the use of this assay for the determination of the activity of aspartic proteinases in biological fluids and during enzyme purification procedures.     

Characterization of an arginine:pyruvate transaminase in arginine catabolism of Pseudomonas aeruginosa PAO1

The arginine transaminase (ATA) pathway represents one of the multiple pathways for L-arginine catabolism in Pseudomonas aeruginosa. The AruH protein was proposed to catalyze the first step in the ATA pathway, converting the substrates L-arginine and pyruvate into 2-ketoarginine and L-alanine. Here we report the initial biochemical characterization of this enzyme. The aruH gene was overexpressed in Escherichia coli, and its product was purified to homogeneity. High-performance liquid chromatography and mass spectrometry (MS) analyses were employed to detect the presence of the transamination products 2-ketoarginine and L-alanine, thus demonstrating the proposed biochemical reaction catalyzed by AruH. The enzymatic properties and kinetic parameters of dimeric recombinant AruH were determined by a coupled reaction with NAD(+) and L-alanine dehydrogenase. The optimal activity of AruH was found at pH 9.0, and it has a novel substrate specificity with an order of preference of Arg > Lys > Met > Leu > Orn > Gln. With L-arginine and pyruvate as the substrates, Lineweaver-Burk plots of the data revealed a series of parallel lines characteristic of a ping-pong kinetic mechanism with calculated V(max) and k(cat) values of 54.6 +/- 2.5 micrromol/min/mg and 38.6 +/- 1.8 s(-1). The apparent K(m) and catalytic efficiency (k(cat)/K(m)) were 1.6 +/- 0.1 mM and 24.1 mM(-1) s(-1) for pyruvate and 13.9 +/- 0.8 mM and 2.8 mM(-1) s(-1) for l-arginine. When L-lysine was used as the substrate, MS analysis suggested Delta(1)-piperideine-2-carboxylate as its transamination product. These results implied that AruH may have a broader physiological function in amino acid catabolism.     

Effects of mutations of the active site arginine residues in 4-oxalocrotonate tautomerase on the pKa values of active site residues and on the pH dependence of catalysis.

The unusually low pK(a) value of the general base catalyst Pro-1 (pK(a) = 6.4) in 4-oxalocrotonate tautomerase (4-OT) has been ascribed to both a low dielectric constant at the active site and the proximity of the cationic residues Arg-11 and Arg-39 [Stivers, J. T., Abeygunawardana, C., Mildvan, A. S., Hajipour, G., and Whitman, C. P. (1996) Biochemistry 35, 814-823]. In addition, the pH-rate profiles in that study showed an unidentified protonated group essential for catalysis with a pK(a) of 9.0. To address these issues, the pK(a) values of the active site Pro-1 and lower limit pK(a) values of arginine residues were determined by direct (15)N NMR pH titrations. The pK(a) values of Pro-1 and of the essential acid group were determined independently from pH-rate profiles of the kinetic parameters of 4-OT in arginine mutants of 4-OT and compared with those of wild type. The chemical shifts of all of the Arg Nepsilon resonances in wild-type 4-OT and in the R11A and R39Q mutants were found to be independent of pH over the range 4.9-9.7, indicating that no arginine is responsible for the kinetically determined pK(a) of 9.0 for an acidic group in free 4-OT. With the R11A mutant, where k(cat)/K(m) was reduced by a factor of 10(2.9), the pK(a) of Pro-1 was not significantly altered from that of the wild-type enzyme (pK(a) = 6.4 +/- 0.2) as revealed by both direct (15)N NMR titration (pK(a) = 6.3 +/- 0.1) and the pH dependence of k(cat)/K(m) (pK(a) = 6.4 +/- 0.2). The pH-rate profiles of both k(cat)/K(m) and k(cat) for the reaction of the R11A mutant with the dicarboxylate substrate, 2-hydroxymuconate, showed humps, i.e., sharply defined maxima followed by nonzero plateaus. The humps disappeared in the reaction with the monocarboxylate substrate, 2-hydroxy-2,4-pentadienoate, indicating that, unlike the wild-type enzyme which reacts only with the dianionic form of the dicarboxylic substrate, the R11A mutant reacts with both the 6-COOH and 6-COO(-) forms, with the 6-COOH form being 12-fold more active. This reversal in the preferred ionization state of the 6-carboxyl group of the substrate that occurs upon mutation of Arg-11 to Ala provides strong evidence that Arg-11 interacts with the 6-carboxylate of the substrate. In the R39Q mutant, where k(cat)/K(m) was reduced by a factor of 10(3), the kinetically determined pK(a) value for Pro-1 was 4.6 +/- 0.2, while the ionization of Pro-1 showed negative cooperativity with an apparent pK(a) of 7.1 +/- 0.1 determined by 1D (15)N NMR. From the Hill coefficient of 0.54, it can be shown that the apparent pK(a) value of 7.1 could result most simply from the averaging of two limiting pK(a) values of 4.6 and 8.2. Mutation of Arg-39, by altering the structure of the beta-hairpin which covers the active site, could result in an increase in the solvent exposure of Pro-1, raising its upper limit pK(a) value to 8.2. In the R39A mutant, the kinetically determined pK(a) of Pro-1 was also low, 5.0 +/- 0.2, indicating that in both the R39Q and R39A mutants, only the sites with low pK(a) values were kinetically operative. With the fully active R61A mutant, the kinetically determined pK(a) of Pro-1 (pK(a) = 6.5 +/- 0.2) agreed with that of wild-type 4-OT. It is concluded that the unusually low pK(a) of Pro-1 shows little contribution from electrostatic effects of the nearby cationic Arg-11, Arg-39, and Arg-61 residues but results primarily from a site of low local dielectric constant.     

Subsites of trypsin active site favor catalysis or substrate binding.

Enzymes enhance chemical reaction rates by lowering the activation energy, the energy barrier of the reaction leading to products. This occurs because enzymes bind the high-energy intermediate of the reaction (the transition state) more strongly than the substrate. We studied details of this process by determining the substrate binding energy (DeltaG(s), calculated from K(m) values) and the activation energy (DeltaG(T), determined from k(cat)/K(m) values) for the trypsin-catalyzed hydrolysis of oligopeptides. Plots of DeltaG(T) versus DeltaG(s) for oligopeptides with 15 amino acid replacements at each of the positions P(1)', P(1), and P(2) were straight lines, as predicted by a derived equation that relates DeltaG(T) and DeltaG(s). The data led to the conclusion that the trypsin active site has subsites that bind moieties of substrate and of transition state in characteristic ratios, whichever substrate is used. This was unexpected and means that each subsite characteristically favors substrate binding or catalysis.     

Mechanistic studies of the yeast polyamine oxidase Fms1: kinetic mechanism, substrate specificity, and pH dependence

The flavoprotein oxidase Fms1 from Saccharomyces cerevisiae catalyzes the oxidation of spermine and N(1)-acetylspermine to yield spermidine and 3-aminopropanal or N-acetyl-3-aminopropanal. The kinetic mechanism of the enzyme has been determined with both substrates. The initial velocity patterns are ping-pong, consistent with reduction being kinetically irreversible. Reduction of Fms1 by either substrate is biphasic. The rate constant for the rapid phase varies with the substrate concentration, with limiting rates for reduction of the enzyme of 126 and 1410 s(-1) and apparent K(d) values of 24.3 and 484 μM for spermine and N(1)-acetylspermine, respectively. The rapid phase is followed by a concentration-independent phase that is slower than turnover. The reaction of the reduced enzyme with oxygen is monophasic, with a rate constant of 402 mM(-1) s(-1) with spermine at 25 °C and 204 mM(-1) s(-1) with N(1)-acetylspermine at 4 °C and pH 9.0. This step is followed by rate-limiting product dissociation. The k(cat)/K(amine)-pH profiles are bell-shaped, with an average pK(a) value of 9.3 with spermine and pK(a) values of 8.3 and 9.6 with N(1)-acetylspermine. Both profiles are consistent with the active forms of substrates having two charged nitrogens. The pH profiles for the rate constant for flavin reduction show pK(a) values of 8.3 and 7.2 for spermine and N(1)-acetylspermine, respectively, for groups that must be unprotonated; these pK(a) values are assigned to the substrate N4. The k(cat)/K(O(2))-pH profiles show pK(a) values of 7.5 for spermine and 6.8 for N(1)-acetylspermine. With both substrates, the k(cat) value decreases when a single residue is protonated.     

Natural substrate assay for chitinases using high-performance liquid chromatography: a comparison with existing assays

The determination of kinetic parameters of chitinases using natural substrates is difficult due to low K(m) values, which require the use of low substrate concentrations that are hard to measure. Using the natural substrate (GlcNAc)(4), we have developed an assay for the determination of k(cat) and K(m)values of chitinases. Product concentrations as low as 0.5 microM were detected using normal-phase high-performance liquid chromatography (HPLC) with an amide 80 column (0.20 x 25 cm) using spectrophotometric detection at 210 nm. By means of this assay, k(cat) and K(m)values for chitinases A (ChiA) and B (ChiB) of Serratia marcescens were found to be 33+/-1s(-1) and 9+/-1 microM and 28+/-2s(-1) and 4+/-2 microM, respectively. For ChiB, these values were compared to those found with commonly used substrates where the leaving group is a (nonnatural) chromophore, revealing considerable differences. For example, assays with 4-methylumbelliferyl-(GlcNAc)(2) yielded a k(cat) value of 18+/-2s(-1) and a K(m) value of 30+/-6 microM. For two ChiB mutants containing a Trp --> Ala mutation in the +1 or +2 subsites, the natural substrate and the 4-methylumbelliferyl-(GlcNAc)(2) assays yielded rather similar K(m) values (5-fold difference at most) but showed dramatic differences in k(cat) values (up to 90-fold). These results illustrate the risk of using artificial substrates for characterization of chitinases and, thus, show that the new HPLC-based assay is a valuable tool for future chitinase research.     

Rapid determination of enzyme kinetics from fluorescence: overcoming the inner filter effect

Fluorescence change is convenient for monitoring enzyme kinetics. Unfortunately, it loses linearity as the absorbance of the fluorescent substrate increases with concentration. When the sum of absorbance at excitation and emission wavelengths exceeds 0.08, this inner filtering effect (IFE) alters apparent initial velocities, K(m), and k(cat). The IFE distortion of apparent initial velocities can be corrected without doing fluorophore dilution assays. Using the substrate's extinction coefficients at excitation and emission wavelengths, the inner filter effect can be modeled during curve fitting for more accurate Michaelis-Menten parameters. A faster and simpler approach is to derive k(cat) and K(m) from progress curves. Strategies to obtain reliable and reproducible estimates of k(cat) and K(m) from only two or three progress curves are illustrated using matrix metalloproteinase 12 and alkaline phosphatase. Accurate estimates of concentration of enzyme-active sites and specificity constant k(cat)/K(m) (from one progress curve with [S]相似文献   

Biochemical evidence for an editing role of thioesterase II in the biosynthesis of the polyketide pikromycin

The pikromycin biosynthetic gene cluster contains the pikAV gene encoding a type II thioesterase (TEII). TEII is not responsible for polyketide termination and cyclization, and its biosynthetic role has been unclear. During polyketide biosynthesis, extender units such as methylmalonyl acyl carrier protein (ACP) may prematurely decarboxylate to generate the corresponding acyl-ACP, which cannot be used as a substrate in the condensing reaction by the corresponding ketosynthase domain, rendering the polyketide synthase module inactive. It has been proposed that TEII may serve as an "editing" enzyme and reactivate these modules by removing acyl moieties attached to ACP domains. Using a purified recombinant TEII we have tested this hypothesis by using in vitro enzyme assays and a range of acyl-ACP, malonyl-ACP, and methylmalonyl-ACP substrates derived from either PikAIII or the loading didomain of DEBS1 (6-deoxyerythronolide B synthase; AT(L)-ACP(L)). The pikromycin TEII exhibited high K(m) values (>100 microm) with all substrates and no apparent ACP specificity, catalyzing cleavage of methylmalonyl-ACP from both AT(L)-ACP(L) (k(cat)/K(m) 3.3 +/- 1.1 m(-1) s(-1)) and PikAIII (k(cat)/K(m) 2.9 +/- 0.9 m(-1) s(-1)). The TEII exhibited some acyl-group specificity, catalyzing hydrolysis of propionyl (k(cat)/K(m) 15.8 +/- 1.8 m(-1) s(-1)) and butyryl (k(cat)/K(m) 17.5 +/- 2.1 m(-1) s(-1)) derivatives of AT(L)-ACP(L) faster than acetyl (k(cat)/K(m) 4.9 +/- 0.7 m(-1) s(-1)), malonyl (k(cat)/K(m) 3.9 +/- 0.5 m(-1) s(-1)), or methylmalonyl derivatives. PikAIV containing a TEI domain catalyzed cleavage of propionyl derivative of AT(L)-ACP(L) at a dramatically lower rate than TEII. These results provide the first unequivocal in vitro evidence that TEII can hydrolyze acyl-ACP thioesters and a model for the action of TEII in which the enzyme remains primarily dissociated from the polyketide synthase, preferentially removing aberrant acyl-ACP species with long half-lives. The lack of rigorous substrate specificity for TEII may explain the surprising observation that high level expression of the protein in Streptomyces venezuelae leads to significant (>50%) titer decreases.     

Unraveling the catalytic mechanism of nitrile hydratases

To elucidate a detailed catalytic mechanism for nitrile hydratases (NHases), the pH and temperature dependence of the kinetic constants k(cat) and K(m) for the cobalt-type NHase from Pseudonocardia thermophila JCM 3095 (PtNHase) were examined. PtNHase was found to exhibit a bell-shaped curve for plots of relative activity versus pH at pH 3.2-11 and was found to display maximal activity between pH 7.2 and 7.8. Fits of these data provided pK(E)(S1) and pK(E)(S2) values of 5.9 +/- 0.1 and 9.2 +/- 0.1 (k(cat)' = 130 +/- 1 s(-1)), respectively, and pK(E)(1) and pK(E)(2) values of 5.8 +/- 0.1 and 9.1 +/- 0.1 (k(cat)'/K(m)' = (6.5 +/- 0.1) x 10(3) s(-1) mm(-1)), respectively. Proton inventory studies indicated that two protons are transferred in the rate-limiting step of the reaction at pH 7.6. Because PtNHase is stable at 60 degrees C, an Arrhenius plot was constructed by plotting ln(k(cat)) versus 1/T, providing E(a) = 23.0 +/- 1.2 kJ/mol. The thermal stability of PtNHase also allowed DeltaH(0) ionization values to be determined, thus helping to identify the ionizing groups exhibiting the pK(E)(S1) and pK(E)(S2) values. Based on DeltaH(0)(ion) data, pK(E)(S1) is assigned to betaTyr(68), whereas pK(E)(S2) is assigned to betaArg(52), betaArg(157), or alphaSer(112) (NHases are alpha(2)beta(2)-heterotetramers). A combination of these data with those previously reported for NHases and synthetic model complexes, along with sequence comparisons of both iron- and cobalt-type NHases, allowed a novel catalytic mechanism for NHases to be proposed.     

The alpha-chymotryptic ydrolysis of glycine esters

1. The alpha-chymotrypsin-catalysed hydrolysis of N-acetylglycine ethyl and thiolethyl esters was investigated at pH7.90 and 25 degrees over a wide range of substrate concentrations. 2. The Lineweaver-Burk plots for these substrates are markedly curved, and it is shown that the curvature is due solely to the ;enzyme-blank' reaction. The rate of this reaction is proportional to free enzyme concentration in the range 10-100mum, with a pseudo-first-order rate constant of approx. 1x10(-3)sec.(-1). Correction for this reaction by the procedure described leads to linear plots. It is shown that the significance of the enzyme-blank reaction depends on the value of k(0)/K(m) for the substrate under investigation. 3. Interpretation of the curvature in the Lineweaver-Burk plots by previous workers in terms of activation by excess of substrate is shown to be erroneous. 4. Values of K(m) 387mm and k(0) 0.039sec.(-1), and K(m) 41mm and k(0) 0.23sec.(-1), were obtained for the ethyl and thiolethyl esters of N-acetylglycine respectively. The literature values for the methyl esters of N-acetyl- and N-propionyl-glycine have been corrected by the procedure described. The new values agree much better with current theories of alpha-chymotrypsin mechanism and specificity. 5. The kinetic parameters for the ethyl and thiolethyl esters indicate the absence of an electrophilic component in the catalytic mechanism of alpha-chymotrypsin, and the importance of the ester function in substrate binding.