Kif18B interacts with EB1 and controls astral microtubule length during mitosis

Regulation of microtubule (MT) dynamics is essential for proper spindle assembly and organization. Kinesin-8 family members are plus-end-directed motors that modulate plus-end MT dynamics by acting as MT depolymerases or as MT plus-end capping proteins. In this paper, we show that the human kinesin-8 Kif18B functions during mitosis to control astral MT organization. Kif18B is a MT plus-tip-tracking protein that localizes to the nucleus in interphase and is enriched at astral MT plus ends during early mitosis. Knockdown of Kif18B caused spindle defects, resulting in an increased number and length of MTs. A yeast two-hybrid screen identified an interaction of the C-terminal domain of Kif18B with the plus-end MT-binding protein EB1. EB1 knockdown disrupted Kif18B targeting to MT plus ends, indicating that EB1/Kif18B interaction is physiologically important. This interaction is direct, as the far C-terminal end of Kif18B is sufficient for binding to EB1 in vitro. Overexpression of this domain is sufficient for plus-end MT targeting in cells; however, targeting is enhanced by the motor domain, which cooperates with the tail to achieve proper Kif18B localization at MT plus ends. Our results suggest that Kif18B is a new MT dynamics regulatory protein that interacts with EB1 to control astral MT length.     

Microtubule stabilization triggers the plus-end accumulation of Kif18A/kinesin-8

The precise control of spindle microtubule (MT) dynamics is essential for chromosome capture and alignment. Kif18A/kinesin-8, an essential regulator of kinetochore MT dynamics, accumulates at its plus-ends in metaphase but not prometaphase cells. The underlying mechanism of time-dependent and kinetochore MT-specific plus-end accumulation of Kif18A is unknown. Here, we examined the factors required for the MT plus-end accumulation of Kif18A. In Eg5 inhibitor-treated cells, Kif18A localized along the MTs in the monopolar spindle and rarely accumulated at their plus-ends, indicating that MT-kinetochore association was not sufficient to induce Kif18A accumulation. In contrast, taxol treatment triggered the rapid MT plus-end accumulation of Kif18A regardless of kinetochore association. Furthermore, Aurora B inhibitor-induced stabilization of the plus-ends of kinetochore MTs promoted the plus-end accumulation of Kif18A. In the absence of Kif18A, treatment with taxol but not Eg5 inhibitor causes highly elongated mitotic MTs, suggesting the importance of plus-end accumulation for the MT length-controlling activity of Kif18A. Taken together, we propose that there is a mutual regulation of kinetochore MT plus-end dynamics and Kif18A accumulation, which may contribute to the highly regulated and ordered changes in kinetochore MT dynamics during chromosome congression and oscillation.     

A non-motor microtubule binding site is essential for the high processivity and mitotic function of kinesin-8 Kif18A

Background

Members of the kinesin-8 subfamily are plus end-directed molecular motors that accumulate at the plus-ends of kinetochore-microtubules (kt-MTs) where they regulate MT dynamics. Loss of vertebrate kinesin-8 function induces hyperstable MTs and elongated mitotic spindles accompanied by severe chromosome congression defects. It has been reported that the motility of human kinesin-8, Kif18A, is required for its accumulation at the plus tips of kt-MTs.

Methodology/Findings

Here, we investigate how Kif18A localizes to the plus-ends of kt-MTs. We find that Kif18A lacking its C-terminus does not accumulate on the tips of kt-MTs and fails to fulfill its mitotic function. In vitro studies reveal that Kif18A possesses a non-motor MT binding site located within its C-proximal 121 residues. Using single molecule measurements we find that Kif18A is a highly processive motor and, furthermore, that the C-terminal tail is essential for the high processivity of Kif18A.

Conclusion/Significance

These results show that Kif18A like its yeast orthologue is a highly processive motor. The ability of Kif18A to walk on MTs for a long distance without dissociating depends on a non-motor MT binding site located at the C-terminus of Kif18A. This C-proximal tail of Kif18A is essential for its plus-end accumulation and mitotic function. These findings advance our understanding of how Kif18A accumulates at the tips of kt-MTs to fulfill its function in mitosis.     

Aurora B and Kif2A control microtubule length for assembly of a functional central spindle during anaphase

The central spindle is built during anaphase by coupling antiparallel microtubules (MTs) at a central overlap zone, which provides a signaling scaffold for the regulation of cytokinesis. The mechanisms underlying central spindle morphogenesis are still poorly understood. In this paper, we show that the MT depolymerase Kif2A controls the length and alignment of central spindle MTs through depolymerization at their minus ends. The distribution of Kif2A was limited to the distal ends of the central spindle through Aurora B–dependent phosphorylation and exclusion from the spindle midzone. Overactivation or inhibition of Kif2A affected interchromosomal MT length and disorganized the central spindle, resulting in uncoordinated cell division. Experimental data and model simulations suggest that the steady-state length of the central spindle and its symmetric position between segregating chromosomes are predominantly determined by the Aurora B activity gradient. On the basis of these results, we propose a robust self-organization mechanism for central spindle formation.     

Aurora A,MCAK, and Kif18b promote Eg5-independent spindle formation

Inhibition of the microtubule (MT) motor protein Eg5 results in a mitotic arrest due to the formation of monopolar spindles, making Eg5 an attractive target for anti-cancer therapies. However, Eg5-independent pathways for bipolar spindle formation exist, which might promote resistance to treatment with Eg5 inhibitors. To identify essential components for Eg5-independent bipolar spindle formation, we performed a genome-wide siRNA screen in Eg5-independent cells (EICs). We find that the kinase Aurora A and two kinesins, MCAK and Kif18b, are essential for bipolar spindle assembly in EICs and in cells with reduced Eg5 activity. Aurora A promotes bipolar spindle assembly by phosphorylating Kif15, hereby promoting Kif15 localization to the spindle. In turn, MCAK and Kif18b promote bipolar spindle assembly by destabilizing the astral MTs. One attractive way to interpret our data is that, in the absence of MCAK and Kif18b, excessive astral MTs generate inward pushing forces on centrosomes at the cortex that inhibit centrosome separation. Together, these data suggest a novel function for astral MTs in force generation on spindle poles and how proteins involved in regulating microtubule length can contribute to bipolar spindle assembly.     

A tethering mechanism controls the processivity and kinetochore-microtubule plus-end enrichment of the kinesin-8 Kif18A

Metaphase chromosome positioning depends on Kif18A, a kinesin-8 that accumulates at and suppresses the dynamics of K-MT plus ends. By engineering Kif18A mutants that suppress MT dynamics but fail to concentrate at K-MT plus ends, we identify a mechanism that allows Kif18A to accumulate at K-MT plus ends to a level required to suppress chromosome movements. Enrichment of Kif18A at K-MT plus ends depends on its C-terminal tail domain, while the ability of Kif18A to suppress MT growth is conferred by the N-terminal motor domain. The Kif18A tail contains a second MT-binding domain that diffuses along the MT lattice, suggesting that it tethers the motor to the MT track. Consistently, the tail enhances Kif18A processivity and is crucial for it to accumulate at K-MT plus ends. The heightened processivity of Kif18A, conferred by its tail domain, thus promotes concentration of Kif18A at K-MT plus ends, where it suppresses their dynamics to control chromosome movements.     

DDA3 recruits microtubule depolymerase Kif2a to spindle poles and controls spindle dynamics and mitotic chromosome movement

Dynamic turnover of the spindle is a driving force for chromosome congression and segregation in mitosis. Through a functional genomic analysis, we identify DDA3 as a previously unknown regulator of spindle dynamics that is essential for mitotic progression. DDA3 depletion results in a high frequency of unaligned chromosomes, a substantial reduction in tension across sister kinetochores at metaphase, and a decrease in the velocity of chromosome segregation at anaphase. DDA3 associates with the mitotic spindle and controls microtubule (MT) dynamics. Mechanistically, DDA3 interacts with the MT depolymerase Kif2a in an MT-dependent manner and recruits Kif2a to the mitotic spindle and spindle poles. Depletion of DDA3 increases the steady-state levels of spindle MTs by reducing the turnover rate of the mitotic spindle and by increasing the rate of MT polymerization, which phenocopies the effects of partial knockdown of Kif2a. Thus, DDA3 represents a new class of MT-destabilizing protein that controls spindle dynamics and mitotic progression by regulating MT depolymerases.     

HURP regulates chromosome congression by modulating kinesin Kif18A function

Chromosome biorientation and congression during mitosis require precise control of microtubule dynamics [1-4]. The?dynamics of kinetochore microtubules (K-MTs) are regulated by a variety of microtubule-associated proteins (MAPs) [4-9]. Recently, a MAP known as HURP (hepatoma upregulated protein) was identified [10-12]. During mitosis, Ran-guanosine 5'-triphosphate (RanGTP) releases HURP from the importin β inhibitory complex and allows it to localize to the kinetochore fiber (k-fiber) [12, 13]. HURP stabilizes k-fibers and promotes chromosome congression [12, 14, 15]. However, the molecular mechanism underlying the role of HURP in regulating chromosome congression remains elusive. Here, we show that overexpression of the N-terminal microtubule binding domain (1-278 aa, HURP(278)) of HURP induces a series of mitotic defects that mimic the effects of Kif18A depletion. In addition, coimmunoprecipitation and bimolecular fluorescence complementation assays identify Kif18A as a novel interaction partner of HURP. Furthermore, quantitative results from live-cell imaging analyses illustrate that HURP regulates Kif18A localization and dynamics at the plus end of K-MTs. Lastly, misaligned chromosomes in HURP(278)-overexpressing cells can be partially rescued by the overexpression of Kif18A. Our results demonstrate in part the regulatory mechanism for Kif18A during chromosome congression and provide new insights into the mechanism of chromosome movement at the metaphase plate.     

Efficient mitosis in human cells lacking poleward microtubule flux

Chromosome segregation relies on the dynamic properties of spindle microtubules (MTs). Poleward MT flux contributes to spindle dynamics through the disassembly of MT minus ends at spindle poles coupled to the continuous poleward transport of spindle MTs. Despite being conserved in metazoan cells, the function of flux remains controversial because flux rates differ widely in different cell types. In meiotic systems, the rate of flux nearly matches that of chromosome movement, but in mitotic systems, flux is significantly slower than chromosome movement. Here, we show that spindles in human mitotic cells depleted of the kinesin-13 proteins Kif2a and MCAK lack detectable flux and that such cells frequently fail to segregate all chromosomes appropriately at anaphase. Elimination of flux reduces poleward chromosome velocity approximately 20%, but does not hinder bipolar spindle assembly, chromosome alignment, or mitotic progression. Thus, mitosis proceeds efficiently in human cells lacking detectable poleward MT flux. These data demonstrate that in human cultured cells, kinetochores are sufficient to effectively power chromosome movement, leading us to speculate that flux is maintained in these cells to fulfill other functional roles such as error correction or kinetochore regulation.     

Kinesin-8 molecular motors: putting the brakes on chromosome oscillations

Recent studies suggest that the human Kinesin-8 molecular motor Kif18A has a role in chromosome congression. Specifically, these studies find that Kif18A promotes chromosome congression by attenuating chromosome oscillation magnitudes. Together with recent modeling work, in vitro studies, and the analysis of in vivo yeast data, these reports reveal how Kinesin-8 molecular motors might control chromosome oscillation amplitudes by spatially regulating the dynamic instability of microtubule plus-ends within the mitotic spindle.     

Molecular basis for specific regulation of neuronal Kinesin-3 motors by doublecortin family proteins

Doublecortin (Dcx) defines a growing family of microtubule (MT)-associated proteins (MAPs) involved in neuronal migration and process outgrowth. We show that Dcx is essential for the function of Kif1a, a kinesin-3 motor protein that traffics synaptic vesicles. Neurons lacking Dcx and/or its structurally conserved paralogue, doublecortin-like kinase 1 (Dclk1), show impaired Kif1a-mediated transport of Vamp2, a cargo of Kif1a, with decreased run length. Human disease-associated mutations in Dcx's linker sequence (e.g., W146C, K174E) alter Kif1a/Vamp2 transport by disrupting Dcx/Kif1a interactions without affecting Dcx MT binding. Dcx specifically enhances binding of the ADP-bound Kif1a motor domain to MTs. Cryo-electron microscopy and subnanometer-resolution image reconstruction reveal the kinesin-dependent conformational variability of MT-bound Dcx and suggest a model for MAP-motor crosstalk on MTs. Alteration of kinesin run length by?MAPs represents a previously undiscovered mode of control of kinesin transport and provides?a mechanism for regulation of MT-based transport by local signals.     

γ‐Tubulin Ring Complexes and EB1 play antagonistic roles in microtubule dynamics and spindle positioning

γ‐Tubulin is critical for microtubule (MT) assembly and organization. In metazoa, this protein acts in multiprotein complexes called γ‐Tubulin Ring Complexes (γ‐TuRCs). While the subunits that constitute γ‐Tubulin Small Complexes (γ‐TuSCs), the core of the MT nucleation machinery, are essential, mutation of γ‐TuRC‐specific proteins in Drosophila causes sterility and morphological abnormalities via hitherto unidentified mechanisms. Here, we demonstrate a role of γ‐TuRCs in controlling spindle orientation independent of MT nucleation activity, both in cultured cells and in vivo, and examine a potential function for γ‐TuRCs on astral MTs. γ‐TuRCs locate along the length of astral MTs, and depletion of γ‐TuRC‐specific proteins increases MT dynamics and causes the plus‐end tracking protein EB1 to redistribute along MTs. Moreover, suppression of MT dynamics through drug treatment or EB1 down‐regulation rescues spindle orientation defects induced by γ‐TuRC depletion. Therefore, we propose a role for γ‐TuRCs in regulating spindle positioning by controlling the stability of astral MTs.     

Functional analysis of human microtubule-based motor proteins, the kinesins and dyneins, in mitosis/cytokinesis using RNA interference

Microtubule (MT)-based motor proteins, kinesins and dyneins, play important roles in multiple cellular processes including cell division. In this study, we describe the generation and use of an Escherichia coli RNase III-prepared human kinesin/dynein esiRNA library to systematically analyze the functions of all human kinesin/dynein MT motor proteins. Our results indicate that at least 12 kinesins are involved in mitosis and cytokinesis. Eg5 (a member of the kinesin-5 family), Kif2A (a member of the kinesin-13 family), and KifC1 (a member of the kinesin-14 family) are crucial for spindle formation; KifC1, MCAK (a member of the kinesin-13 family), CENP-E (a member of the kinesin-7 family), Kif14 (a member of the kinesin-3 family), Kif18 (a member of the kinesin-8 family), and Kid (a member of the kinesin-10 family) are required for chromosome congression and alignment; Kif4A and Kif4B (members of the kinesin-4 family) have roles in anaphase spindle dynamics; and Kif4A, Kif4B, MKLP1, and MKLP2 (members of the kinesin-6 family) are essential for cytokinesis. Using immunofluorescence analysis, time-lapse microscopy, and rescue experiments, we investigate the roles of these 12 kinesins in detail.     

A computational model predicts Xenopus meiotic spindle organization

The metaphase spindle is a dynamic bipolar structure crucial for proper chromosome segregation, but how microtubules (MTs) are organized within the bipolar architecture remains controversial. To explore MT organization along the pole-to-pole axis, we simulated meiotic spindle assembly in two dimensions using dynamic MTs, a MT cross-linking force, and a kinesin-5-like motor. The bipolar structures that form consist of antiparallel fluxing MTs, but spindle pole formation requires the addition of a NuMA-like minus-end cross-linker and directed transport of MT depolymerization activity toward minus ends. Dynamic instability and minus-end depolymerization generate realistic MT lifetimes and a truncated exponential MT length distribution. Keeping the number of MTs in the simulation constant, we explored the influence of two different MT nucleation pathways on spindle organization. When nucleation occurs throughout the spindle, the simulation quantitatively reproduces features of meiotic spindles assembled in Xenopus egg extracts.     

Kinetochore dynein is required for chromosome motion and congression independent of the spindle checkpoint

During mitosis, the motor molecule cytoplasmic dynein plays key direct and indirect roles in organizing microtubules (MTs) into a functional spindle. At this time, dynein is also recruited to kinetochores, but its role or roles at these organelles remain vague, partly because inhibiting dynein globally disrupts spindle assembly [1-4]. However, dynein can be selectively depleted from kinetochores by disruption of ZW10 [5], and recent studies with this approach conclude that kinetochore-associated dynein (KD) functions to silence the spindle-assembly checkpoint (SAC) [6]. Here we use dynein-antibody microinjection and the RNAi of ZW10 to explore the role of KD in chromosome behavior during mitosis in mammals. We find that depleting or inhibiting KD prevents the rapid poleward motion of attaching kinetochores but not kinetochore fiber (K fiber) formation. However, after kinetochores attach to the spindle, KD is required for stabilizing kinetochore MTs, which it probably does by generating tension on the kinetochore, and in its absence, chromosome congression is defective. Finally, depleting KD reduces the velocity of anaphase chromosome motion by approximately 40%, without affecting the rate of poleward MT flux. Thus, in addition to its role in silencing the SAC, KD is important for forming and stabilizing K fibers and in powering chromosome motion.     

Microtubule dynamics in the spindle. Theoretical aspects of assembly/disassembly reactions in vivo

The mitotic spindle contains several classes of microtubules (MTs) whose lengths change independently during mitosis. Precise control over MT polymerization and depolymerization during spindle formation, anaphase chromosome movements, and spindle breakdown is necessary for successful cell division. This model proposes the site of addition and removal of MT subunits in each of four classes of spindle MTs at different stages of mitosis, and suggests how this addition and removal is controlled. We propose that spindle poles and kinetochores significantly alter the assembly-disassembly kinetics of associated MT ends. Control of MT length is further modulated by localized forces affecting assembly and disassembly kinetics of individual sets of MTs.     

A unique kinesin-8 surface loop provides specificity for chromosome alignment

Microtubule length control is essential for the assembly and function of the mitotic spindle. Kinesin-like motor proteins that directly attenuate microtubule dynamics make key contributions to this control, but the specificity of these motors for different subpopulations of spindle microtubules is not understood. Kif18A (kinesin-8) localizes to the plus ends of the relatively slowly growing kinetochore fibers (K-fibers) and attenuates their dynamics, whereas Kif4A (kinesin-4) localizes to mitotic chromatin and suppresses the growth of highly dynamic, nonkinetochore microtubules. Although Kif18A and Kif4A similarly suppress microtubule growth in vitro, it remains unclear whether microtubule-attenuating motors control the lengths of K-fibers and nonkinetochore microtubules through a common mechanism. To address this question, we engineered chimeric kinesins that contain the Kif4A, Kif18B (kinesin-8), or Kif5B (kinesin-1) motor domain fused to the C-terminal tail of Kif18A. Each of these chimeric kinesins localizes to K-fibers; however, K-fiber length control requires an activity specific to kinesin-8s. Mutational studies of Kif18A indicate that this control depends on both its C-terminus and a unique, positively charged surface loop, called loop2, within the motor domain. These data support a model in which microtubule-attenuating kinesins are molecularly “tuned” to control the dynamics of specific subsets of spindle microtubules.     

The kinesin-8 motor Kif18A suppresses kinetochore movements to control mitotic chromosome alignment

During vertebrate cell division, chromosomes oscillate with periods of smooth motion interrupted by abrupt reversals in direction. These oscillations must be spatially constrained in order to align and segregate chromosomes with high fidelity, but the molecular mechanism for this activity is uncertain. We report here that the human kinesin-8 Kif18A has a primary role in the control of chromosome oscillations. Kif18A accumulates as a gradient on kinetochore microtubules in a manner dependent on its motor activity. Quantitative analyses of kinetochore movements reveal that Kif18A reduces the amplitude of preanaphase oscillations and slows poleward movement during anaphase. Thus, the microtubule-depolymerizing kinesin Kif18A has the unexpected function of suppressing chromosome movements. Based on these findings, we propose a molecular model in which Kif18A regulates kinetochore microtubule dynamics to control mitotic chromosome positioning.     

The human kinesin Kif18A is a motile microtubule depolymerase essential for chromosome congression

BACKGROUND: The accurate alignment of chromosomes at the spindle equator is fundamental for the equal distribution of the genome in mitosis and thus for the genetic integrity of eukaryotes. Although it is well established that chromosome movements are coupled to microtubule dynamics, the underlying mechanism is not well understood. RESULTS: By combining RNAi-depletion experiments with in vitro biochemical assays, we demonstrate that the human kinesin Kif18A is a motile microtubule depolymerase essential for chromosome congression in mammalian tissue culture cells. We show that in vitro Kif18A is a slow plus-end-directed kinesin that possesses microtubule depolymerizing activity. Notably, Kif18A like its yeast ortholog Kip3p depolymerizes longer microtubules more quickly than shorter ones. In vivo, Kif18A accumulates in mitosis where it localizes close to the plus ends of kinetochore microtubules. The depletion of Kif18A induces aberrantly long mitotic spindles and loss of tension across sister kinetochores, resulting in the activation of the Mad2-dependent spindle-assembly checkpoint. Live-cell microscopy studies revealed that in Kif18A-depleted cells, chromosomes move at reduced speed and completely fail to align at the spindle equator. CONCLUSIONS: These studies identify Kif18A as a dual-functional kinesin and a key component of chromosome congression in mammalian cells.     

Xorbit/CLASP links dynamic microtubules to chromosomes in the Xenopus meiotic spindle

A family of microtubule (MT)-binding proteins, Orbit/multiple asters/cytoplasmic linker protein-associated protein, has emerged as an important player during mitosis, but their functional mechanisms are poorly understood. In this study, we used meiotic egg extracts to gain insight into the role of the Xenopus laevis homologue Xorbit in spindle assembly and function. Xorbit immunodepletion or its inhibition by a dominant-negative fragment resulted in chromosome alignment defects and aberrant MT structures, including monopolar and small spindles. Xorbit-depleted extracts failed to nucleate MTs around chromatin-coated beads, indicating its essential requirement for spindle assembly in the absence of centrosomes and kinetochores. Xorbit's MT stabilizing effect was most apparent during anaphase, when spindle MTs depolymerized rapidly upon Xorbit inhibition. Biochemical interaction between a COOH-terminal Xorbit fragment and the kinetochore-associated kinesin centromeric protein E may contribute to Xorbit's role in chromosome congression. We propose that Xorbit tethers dynamic MT plus ends to kinetochores and chromatin, providing a stabilizing activity that is crucial for spindle assembly and chromosome segregation.