Asymmetric epoxidation of alpha-olefins having neighboring sugar chiral templates and alternating copolymerization with dicarboxylic anhydrides

Sugar-substituted epoxides 5-8 were synthesized by asymmetric epoxidation (in CH(2)Cl(2)/water) of alpha-olefins having neighboring sugars (1-4) by use of an achiral oxidant (MCPBA), in which the sugar moiety acted as a chiral template. The diastereoselectivities depend on the methylene spacer between vinyl group and carbohydrate derivatives. The methylene spacer between sugar and vinyl groups influenced the diastereoselectvity. In the case of epoxidation of 4 at 27 degrees C for 24 h, the diastereoselectivity was the highest (99/1). Copolymerizations of 5-8 with succinic anhydride were attained at 100 degrees C for 72 h to give poly(ethylene succinate) having pendant carbohydrate [poly(SAn-alt-5), M(n) = 1.4 x 10(3); poly(SAn-alt-6), M(n) = 2.2 x10(3); poly(SAn-alt-7), M(n) = 2.9 x 10(3); poly(SAn-alt-8), M(n) = 1.8 x 10(3)]. The methylene spacer between sugar and epoxide has an effect on the reactivity of epoxide in copolymerization as well as the diastereoselectivity. Alternating copolymerization of 7 and glutaric anhydride gave a polyester of M(n) 4.2 x10(3).     

Evidence of nitric oxide and angiotensin II regulation of circulation and cutaneous drinking in Bufo marinus

The nitric oxide synthase inhibitor N(G)-nitro-L-arginine methyl ester (l-NAME) increased vascular resistance (VR) 10% above baseline of 3.08+/-0.08 (n=11) mmHg/mL/min at 10 mg/kg and 20% above 3.05+/-0.08 (n=9) at 50 mg/kg in anesthetized toads (Bufo marinus). Blood pressure was unaffected by either dose of L-NAME. Blood flow decreased at the higher dose of L-NAME. L-arginine (300 mg/kg) reversed the effects of L-NAME on VR and blood flow in toads treated with 10 mg/kg but not with 50 mg/kg. Injection of 50 mg/kg L-NAME into empty-bladder toads produced a 10% decrease in water uptake, J(v), resulting in a J(v) of 1,267+/-11 cm(3)/cm(2)/s x 10(-7) (n=9) compared to 1,385+/-12 (n=8) for controls. Injection of 10 microg/kg angiotensin II (ANG II) increased J(v) 15% across the pelvic patch (J(v), cm(3)/cm(2)/s x 10(-7)), resulting in a J(v) of 1,723+/-12 cm(3)/cm(2)/s x 10(-7) (n=8) compared to 1,471+/-12 (n=8) for controls. It is hypothesized that during cutaneous drinking blood flow into the capillary bed of the pelvic patch is regulated by nitric oxide and ANG II.     

The two modes of binding of Ru(phen)(2)dppz(2+) to DNA: thermodynamic evidence and kinetic studies

The binding of Ru(phen)(2)dppz(2+) (dppz=dipyrido[3,2-a:2',3'-c]phenazine) to DNA was investigated at pH 7.0 and 25 degrees C using stopped-flow and spectrophotometric methods. Equilibrium measurements show that two modes of binding, whose characteristics depend on the polymer to dye ratio (C(P)/C(D)), are operative. The binding mode occurring for values of C(P)/C(D) higher than 3 exhibits positive cooperativity, which is confirmed by kinetic experiments. The reaction parameters are K=2 x 10(3)M(-1), omega=550, n=1, k(r)=(1.9+/-0.5) x 10(7)M(-1)s(-1) and k(d)=(9.5+/-2.5)x10(3)s(-1) at I=0.012 M. The results are discussed in terms of prevailing surface interaction with DNA grooves accompanied by partial intercalation of the dppz residue. The other binding mode becomes operative for C(P)/C(D)<3 and the equilibria analysis shows this is an ordinary intercalation mode (K=1.3 x 10(6) M(-1), n=1.5 at I=0.012 M and K=2 x 10(5) M(-1), n=1.2 at I=0.21 M). Similar behaviour is displayed by double-stranded poly(A).     

Dehydration polycondensation of dicarboxylic acids and diols using sublimating strong brønsted acids

We investigated catalytic activities of strong br?nsted acids for dehydration polycondensations of dicarboxylic acids and diols, which were carried out at low temperature (<100 °C) under reduced pressure (0.3-3 mmHg). Strong Br?nsted acids, bis(perfluoroalkanesulfonyl)imide and perfluoroalkanesulfonic acid, showed higher activity than p-toluenesulfonic acid or rare-earth catalysts at 60 °C. In particular, bis(nonafluorobutanesulfonyl)imide (Nf(2)NH) showed the highest activity to synthesize not only aliphatic polyester (M(n) > 19000) but also aromatic polyester (M(n) > 7000). The used Nf(2)NH was sublimated from the reaction flask during polycondensation, and the sublimate, Nf(2)NH, was extra pure so that we can reuse the catalyst without loss of the activity in the dehydration polycondensations.     

Bile acids: XLVIII. Separation of conjugated bile acids by high-pressure liquid chromatography

Major conjugated bile acids of human bile have been resolved by high-pressure liquid chromatography. The elutions are carried out in two stages on Corasil II or μPorasil columns; first, an alkaline solvent system (2-propanol/ethyl acetate/water/7n ammonium hydroxide, 260:600:50:3) was used for separation into groups: tauro-dihydroxy derivatives, taurocholate, glyco-dihydroxy derivatives, and glycocholate. The fraction containing glyco-dihydroxy conjugates was separated by rechromatography in acetonitrile/acetic acid, 400:10, and the fraction containing tauro-dihydroxy conjugates could be partially resolved by rechromatography in acetonitrile/acetic acid/formic acid (97%)/water, 500:10:5:10. Three samples of prepared human bile have been similarly treated.     

Molecular Sieving by the Bacillus megaterium Cell Wall and Protoplast

Passive permeabilities of the cell wall and protoplast of Bacillus megaterium strain KM were characterized by use of 50 hydrophilic probing molecules (tritiated water, sugars, dextrans, glycols, and polyglycols) which varied widely in size. Weight per cent uptake values (R(w)) were measured at diffusional equilibrium under conditions that negated the influences of adsorption or active transport. Plots of R(w) for intact cells as a function of number-average molecular weight ( M(n)) or Einstein-Stokes hydrodynamic radius ( r(ES)) of the solutes showed three phases: a protoplast uptake phase with a polydisperse exclusion threshold of M(n) = 0.6 x 10(3) to 1.1 x 10(3), r(ES) = 0.6 to 1.1 nm; a cell wall uptake phase with a polydisperse exclusion threshold of M(n) = 0.7 x 10(5) to 1.2 x 10(5), r(ES) congruent with 8.3 nm; and a total exclusion phase. Isolated cell walls showed only the latter two phases. However, it became evident that the cell wall selectively passed only the smallest molecules in a heterodisperse polymer sample. When the molecular-weight distributions of polyglycol samples ( M(n) = 1,000, 1,450, and 3,350) were determined by analytical gel chromatography before and after uptake by intact cells or isolated cell walls, a quasi-monodisperse exclusion threshold was obtained corresponding to M(n) = 1,200, r(ES) = 1.1 nm. The permeability of isolated protoplasts was assessed by the relative ability of solutes to effect osmotic stabilization. An indefinite exclusion threshold, evident even with monodisperse sugars, was attributed to lengthwise orientation of the penetrating rod-shaped molecules. Altogether, the best estimate of the limiting equivalent porosity of the protoplast was 0.4 to 0.6 nm in radius and of the cell wall, 1.1 nm.     

Metabolism of straight saturated medium chain length (C9 to C12) dicarboxylic acids

A method utilizing thin-layer chromatography, high performance liquid chromatography, and mass spectrometry was developed for the quantification of C9, C10, C11, and C12 dicarboxylic acids in serum, urine, and feces of human volunteers and rats after oral administration of the acids. The method allowed good resolution and measurement of the dicarboxylic acids at nanogram levels. In humans, excretion was independent of the dosage; about 60% of C9, 17% of C10, 5% of C11, and 1% of C12 were excreted in the urine during the first 12 hours after administration. The concentration of the acids in serum peaked between 2 and 3 hours. Excretion was also independent of dosage in rats. About 2.5% of C, 2.1% of C10, 1.8% of C11, and 1.6% of C12 were excreted in the urine over a period of 5 days. The serum concentration and the urinary excretion of the diacids reached a maximum at the second day after the oral dose. In both humans and rats, the dicarboxylic acids found in serum and urine were 2, 4, or 6 carbon atoms shorter than the corresponding administered diacid. This indicates that there was beta-oxidation of the ingested diacids to some extent. The administration of [1,9-14C]azeliac acid and of [10,11-3H]dodecandioic acid confirmed the occurrence of beta-oxidation, and led to elucidation of the fate of the ingested diacids that were not excreted as such in the urine.     

Determination of monoenoic fatty acid double bond position by permanganate-periodate oxidation followed by high-performance liquid chromatography of carboxylic acid phenacyl esters

This investigation was carried out to develop methods for a reverse-phase, high-performance liquid chromatography analysis of the monocarboxylic and dicarboxylic acids produced by permanganate-periodate oxidation of monoenoic fatty acids. Oxidation reactions were performed using [U-14C]oleic acid and [U-14C]oleic acid methyl ester in order to measure reaction yields and product distributions. The 14C-labeled oxidation products consisted of nearly equal amounts of monocarboxylic and dicarboxylic acid (or dicarboxylic acid monomethyl ester), with few side products (yield greater than 98%). Conversion of the carboxylic acids to phenacyl esters proceeded to completion. HPLC of carboxylic acid phenacyl esters was performed using a C18 column with a linear solvent gradient beginning with acetonitrile/water (1/1) and ending with 100% acetonitrile. Excellent resolution was achieved for all components of a mixture of C5 through C12 monocarboxylic acid phenacyl esters and C6 through C11 dicarboxylic acid phenacyl esters. Resolution was also achieved for all components of a mixture of C5 through C12 monocarboxylic acid phenacyl esters and C6 through C11 dicarboxylic acid monomethyl, monophenacyl esters. The resolution obtained by HPLC demonstrates that, for a wide range of monoenoic fatty acids, both products of a permanganate-periodate oxidation can be identified on a single chromatogram. Free fatty acids and fatty acid methyl esters were analyzed with equal success. Neither the oxidation nor the esterification reaction caused detectable hydrolysis of methyl ester. The method is illustrated for free acids and methyl esters of 14:1 (cis-9), 16:1 (cis-9), 18:1 (cis-6), 18:1 (cis-9), and 18:1 (cis-11).     

Interaction of ApoA-1 and ApoE-3 with triglyceride-phospholipid emulsions containing increasing cholesterol concentrations. Model of triglyceride-rich nascent and remnant lipoproteins

The cholesterol content of triglyceride-rich lipoproteins increases during their catabolism in circulation. We therefore studied the binding of the exchangeable apoprotein apoA-1 and apoE-3 to triolein-rich emulsions with increasing cholesterol content. Five emulsion systems containing 83.1-88.8% (w/w) triolein, 9.3-10.1% egg yolk phosphatidylcholine, and 1.1-7.3% cholesterol were isolated from sonicated lipid mixtures by flotation. Negative stain EM of emulsions containing 1.1 and 7.3% cholesterol showed polydisperse populations of large spherical particles with diameters of 106 +/- 39 and 108 +/- 57 nm. These values are similar to particle diameters calculated from the lipid composition data. No lamellar structures were observed by EM, even after addition of apoA-1 at a molar ratio to lecithin of 10(-2). Apolipoproteins apoA-1 and apoE-3 bound to the particles in a saturable manner without altering particle morphology. We found a dissociation constant Kd = 7.4 x 10(-7) M and a binding capacity N = 3.9 x 10(-3) proteins/lecithin for apoA-1 with particles containing 1.1% cholesterol; the Kd and N values for apoE-3 were very similar. When the emulsion particles were saturated with cholesterol at 7.3%, the protein binding capacity N sharply decreased to 0.6 x 10(-3) (apoA-1) and 0.7 x 10(-3) proteins/lecithin (apoE-3), but the Kd values were virtually unchanged. No change in N occurred when the particle cholesterol content was increased from 1.1 to 3.7%, which spans the normal physiological range. These results suggest that increases in lipoprotein cholesterol content above 3.7% may be responsible for impaired apoprotein redistribution and altered metabolism of remnants such as beta-VLDL.     

Synthesis of Poly[APMA]-DOTA-64Cu conjugates for interventional radionuclide therapy of prostate cancer: assessment of intratumoral retention by micro-positron emission tomography

To develop new radiopharmaceuticals for interventional radionuclide therapy of locally recurrent prostate cancer, poly[N-(3-aminopropyl)methacrylamide] [poly(APMA)] polymers were synthesized by free radical precipitation polymerization in acetone-dimethylsulfoxide using N,N'-azobis(isobutyronitrile) as the initiator. The polymers were characterized with nuclear magnetic resonance, size exclusion chromatography, and dynamic light scattering (M(n) = 2.40 x 10(4), M(w)/M(n) = 1.87). Subsequently, poly[APMA] was coupled with 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid (DOTA) using 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride as an activator, followed by conjugation with (64)Cu radionuclide. Prolonged retention of poly[APMA]-DOTA-(64)Cu conjugates within the tumor tissues was demonstrated by micro-positron emission tomography at 24 hours following intra-tumoral injection of the conjugates to human prostate xenografts in mice. The data suggest that the poly[APMA]-DOTA-(64)Cu conjugates might be useful for interventional radionuclide therapy of locally recurrent prostate cancer in humans.     

Structure and chain conformation of beta-glucan isolated from Auricularia auricula-judae

From Auricularia auricula-judae, a water soluble beta-D-glucan, named as AAG, was isolated by extraction with 70% ethanol/water solution. Its chemical structure was analyzed by gas chromatography (GC), gas chromatography-mass spectrometry (GC-MS), matrix-assisted laser desorption /ionization (MALDI)-time of flight (TOF), and 1D, 2D NMR. AAG was detected, for the first time, to be composed of a main chain of (1-->4)-linked D-glucopyranosyl with glucopyranosyl side groups at O6. With the help of MALDI-TOF-MS, the sequence and the distribution of glucuronic acid were determined and the content of glucuronic acid is about 19%. Five fractions were prepared from the AAG sample in water by ultrasonic degradation method. Their molecular weight, size, and shape (chain conformation) were studied by dynamics light scattering (DLS), static laser light scattering (LLS), size exclusion chromatography combined LLS (SEC-LLS) and viscometry in 0.1M NaCl aqueous solution at 25 degrees C. The dependence of intrinsic viscosity ([eta]) on Mw for this polysaccharide was established to be [eta] = 1.22 x10(-3)Mw (1.00) (cm3 g(-1)) in the range of Mw from 3.40 x 10(4) to 2.88 x 10(5). The conformational parameters of the AAG polysaccharide were found to be 820 nm(-1) for molar mass per unit contour length (ML), 12.3 nm for persistence length (q) and 2.1 for rho (s2(1/2)/Rh). The results suggested that the polysaccharide exists as extended chains in 0.1M NaCl aqueous solution. The chemical structure of AAG containing glucuronic acid and side groups led to steric hindrance, resulting in the increased stiffness of the chains.     

Effects of sperm concentrations and culture media on fertilization and development of in vitro matured pig oocytes

This study was carried out to investigate the effects of sperm concentrations and culture media on fertilization and development of in vitro matured pig oocytes. The concentrations of frozen-thawed sperm were 0.2 x 10(7), 2 x 10(7), 20 x 10(7) and 200 x 10(7)/ml, respectively. Culture media were NCSU-23, HEPES-buffered (25 mM) NCSU-23, PZM-3 and PZM-4, respectively. Increasing the sperm concentration from 0.2 x 10(7) to 2 x 10(7)/ml, significantly increased the penetration rate. Also, increasing the sperm concentration from 20 x 10(7) to 200 x 10(7)/ml increased the penetration rate from 62.1% to 69.9%, respectively, with no differences between these two concentrations. A similar pattern was observed for polyspermic penetration and male pronucleus formation. The mean number of sperm per oocyte significantly increased in the 20 x 10(7)/ml and again in the 200 x 10(7)/ml sperm concentrations. The percentage of blastocysts from cleaved oocytes at the 2 x 10(7)/ml sperm concentration was significantly higher than that at the 0.2 x 10(7), 20 x 10(7) and 200 x 10(7)/ml sperm concentrations. The percentage of blastocysts from cleaved oocytes and the cell numbers per blastocyst were significantly higher in the HEPES-buffered NCSU-23 culture medium than in the NCSU-23, PZM-3 and PZM-4 culture media under a gas atmosphere of 5% CO2 in air.     

Piezoelectric-excited millimeter-sized cantilever (PEMC) sensors detect Bacillus anthracis at 300 spores/mL

Piezoelectric-excited millimeter-sized cantilever (PEMC) sensors consisting of a piezoelectric and a borosilicate glass layer with a sensing area of 2.48 mm2 were fabricated. Antibody specific to Bacillus anthracis (BA, Sterne strain 7702) spores was immobilized on PEMC sensors, and exposed to spores (300 to 3x10(6) spores/mL). The resonant frequency decreased at a rate proportional to the spore concentration and reached a steady state frequency change of 5+/-5 Hz (n=3), 92+/-7 Hz (n=3), 500+/-10 Hz (n=3), 1030+/-10 Hz (n=2), and 2696+/-6 Hz (n=2) corresponding to 0, 3x10(2), 3x10(3), 3x10(4), and 3x10(6) spores/mL, respectively. The reduction in resonant frequency is proportional to the change in cantilever mass, and thus the observed changes are due to the attachment of spores on the sensor surface. Selectivity of the antibody-functionalized sensor was determined with samples of BA (3x10(6)/mL) mixed with Bacillus thuringiensis (BT; 1.5x10(9)/mL) in various volume ratios that yielded BA:BT ratios of 1:0, 1:125, 1:250, 1:500 and 0:1. The corresponding resonance frequency decreases were, respectively, 2345, 1980, 1310, 704 and 10 Hz. Sample containing 100% BT spores (1.5x10(9)/mL and no BA) gave a steady state frequency decrease of 10 Hz, which is within noise level of the sensor, indicating excellent selectivity. The observed binding rate constant for the pure BA and BT-containing samples ranged from 0.105 to 0.043 min-1 in the spore concentration range 300 to 3x10(6)/mL. These results show that detection of B. anthracis spore at a very low concentration (300 spores/mL) and with high selectivity in presence of another Bacillus spore (BT) can be accomplished using piezoelectric-excited millimeter-sized cantilever sensors.     

Acacia senegal gum: continuum of molecular species differing by their protein to sugar ratio, molecular weight, and charges

The main chemical and physical features of the Acacia senegal exudate gum and its molecular fractions isolated by chromatographies were determined using a wide variety of methods. Three main molecular fractions were isolated after hydrophobic interaction chromatography (HIC) and biochemical analyses confirmed the presence of an arabinogalactan-peptide (FI), an arabinogalactan-protein (FII), and a glycoprotein (FIII) fraction as described commonly in the literature. Further purification of FIII using size exclusion chromatography revealed three distinct populations. A wide molecular weight distribution within each population with the presence of at least two distinct molecular species per population was identified by high performance size exclusion chromatography coupled to on line multi-angle laser light scattering (HPSEC-MALLS). In addition, both sugars content (neutral and uronic acids) and UV profiles revealed that FIII was composed of a continuum of molecular species differing both by their protein-to-sugar ratio and molecular weight. FI and FII had average molecular weight M(w) of 2.86 x 10(5) and 1.86 x 10(6) g.mol(-1), respectively, and a low polydispersity index (M(w)()/M(n) approximately 1.3). The three populations identified in FIII after HIC separation had M(w) of 2.67 x 10(6), 7.76 x 10(5), and 2.95 x 10(5) g.mol(-1) and very low polydispersity indexes (1.13, 1.04, and 1.01). Estimation of the polypeptide backbone length in the three fractions gave 43, 2253, and 4443 amino acid residues, respectively, hydroxyproline (Hyp) and serine being the most prominent residues within FI and FII, Hyp and Asx (asparagine + aspartic acid) within FIII. Secondary structure prediction from circular dichroism data resulted in polyproline II, beta-sheet, and random coil structures for FII and FIII, whereas no secondary structure was identified in FI. The existence of exposed tryptophanyl residues to the solvent was noticed by fluorescence in FII and FIII, tryptophan residues being absent from FI. In addition, 8-5' non cyclic diferulic acid was identified to be covalently linked to carbohydrate moieties of FII. Infrared spectroscopy identified the different vibrations of saccharidic and peptidic bonds with absorbance amplitudes in agreement with sugar and protein elementary analyses. Titration measurements in order to evaluate the number of charges on total Acacia gum and its molecular fractions revealed that 100% of charges came from polysaccharidic moieties (i.e., glucuronic acids) in FI. Charges coming from polysaccharidic moieties were of 91.3% and 37.9% for FII and FIII, respectively, the remaining 8.7% and 62.1% charges in FII and FIII molecular fractions coming from the polypeptidic backbone.     

Dietary supplementation with a source of omega-3 fatty acids increases sperm number and the duration of ejaculation in boars

Development of nutritional strategies to increase the production of fertile sperm would further enhance the distribution of superior genetic material by AI. The objective was to determine the effects of a dietary source of omega-3 fatty acids in boars on semen characteristics and sexual behavior. Boars were fed daily 2.2 kg of a diet top-dressed with 0.3 kg of corn (controls; n=12) or 0.3 kg of a supplement containing 31% omega-3 fatty acids (n=12) for 16 weeks. Semen was collected weekly and for boars that received the supplement containing omega-3 fatty acids, total sperm per ejaculate averaged 84.3+/-2.3 x 10(9) (mean+/-S.E.M.) during Weeks 0-7, and increased (P=0.02) to 95.6+/-2.3 x 10(9) during Weeks 8-15. Control boars averaged 86.3+/-2.3 x 10(9) sperm per ejaculate during Weeks 0-7 and 86.4+/-2.3 x 10(9) during Weeks 8-15. Other semen characteristics were similar (P>0.1) between groups. Duration of ejaculation was affected by treatment (343.9s for controls and 388.8s for boars fed omega-3 fatty acids; S.E.M.=15.7; P=0.05). In summary, semen characteristics and sexual behavior were altered in boars fed a supplement containing omega-3 fatty acids. Boar semen is typically diluted to create AI doses containing 3 x 10(9) sperm each; therefore, use of the supplement increased the number of potential AI doses by approximately three per ejaculate after the initial 7 week supplementation period.     

Inhibition of mucin secretion in a colonic adenocarcinoma cell line by DIDS and potassium channel blockers

The factors which influence the exocytosis of mucins are not well characterized. Since the physical properties of mucins may be affected significantly by the co-secretion of electrolytes and water, we studied the relationship between ion movement and mucin secretion in T84 cells, a human colonic adenocarcinoma cell line which has been well characterized with respect to apical chloride secretion. Secretion of mucin was assessed by immunoassay of mucin appearing in the medium within 30 min of stimulation. Cells were grown on plastic in DMEM/Ham's F12 medium and experiments were carried out at 70% confluence. Mucin secretion was stimulated by the calcium ionophore A23187, or A23187 plus vasoactive intestinal polypeptide. Stimulated mucin secretion was not affected by loop diuretics (furosemide (1 x 10(-3) M) or bumetanide (1 x 10(-4) M)), with or without the addition of ouabain (5 x 10(-5) M) and amiloride (1 x 10(-5) M), making it unlikely that transcellular chloride movements in necessary for mucin secretion. However, 4,4'-diisothiocyanostilbene-2,2'-disulfonic acid (DIDS; (1 x 10(-5) and 5 x 10(-5) M) and three potassium channel blockers BaCl2 (1 x 10(-3) and 5 x 10(-3) M), tetraethylammonium chloride (1 x 10(-2) M) and quinine (5 x 10(-4) M) inhibited mucin secretion. A DIDS-sensitive chloride channel or chloride/bicarbonate exchanger and a Ca2(+)-dependent potassium channel may play important roles in mucin secretion. Since plasma membranes are sparingly permeable to DIDS, the DIDS-sensitive site is likely to be on the apical plasma membrane, perhaps at an initiation locus for exocytosis.     

The role of surface physicochemical properties in determining the distribution of the autochthonous microflora in mineral water bottles

Investigation of the distribution of the viable autochthonous microflora in three brands of 1-2-month-old bottled mineral water showed that 1.8 x 10(4) (S.E.M. 8.9 x 10(3), n = 5) to 1.2 x 10(5) (S.E.M. 1.3 x 10(4), n = 5) cfu ml-1 were planktonic cells while 11 (S.E.M. 4, n = 5)-632 (S.E.M. 176, n = 5) cfu cm-2 were found in the biofilm. The biofilm represented between 0.03 and 1.79% of the total viable microbial population in the 1.5 litre bottles studied. Scanning electron microscopy studies showed that the cells adhering to the polyethylene terephthalate (PET) bottles were predominantly rod-shaped, sparsely distributed over the surface. In contrast, the cells adhering to the high density polyethylene (HDPE) caps were found to be mainly clumps of coccoid cells, suggesting that the bottle may provide different microhabitats for different microfloras. Large-scale roughness, such as that observed as lettering inside the cap (average height (z) = 93 microns) was associated with a 46-fold increase in cell numbers. Increased small-scale roughness, as measured by atomic force microscopy on PET and HDPE surfaces (average roughness (Ra) = 5-551 (nm), showed no correlation with adhesion. Investigations of surface hydrophobicity by the sessile drop technique showed that contact angles (theta) were greater on the HDPE caps (theta = 89-96 degrees) than on the PET surfaces (theta = 69-80 degrees). However, no correlation was found between contact angle and attached cell numbers. Measurements of surface electrostatic charge by streaming potential showed that the PET carried an overall negative charge, measuring -15.9 to -16.6 mV in mineral water. No significant change in charge occurred when the monomer composition of the PET was altered. It was concluded that surface roughness, in particular the scale of surface topographical features, is the most important physicochemical surface characteristic determining the distribution of the autochthonous microflora in mineral water bottles.     

Synthesis of sugar-substituted poly(phenylenevinylene)s

Sugar-containing PPVs, poly{2-[O-(2-acetamido-2-deoxy-beta-D-glucopyranosyl)]-5-methoxy-p-phenylenevinylene-alt-p-phenylenevinylene} (PPV-GlcNAc) and poly{2,5-bis-[O-(beta-d-glucopyranosyl)]-p-phenylenevinylene-alt-p-phenylenevinylene} (PPV-Glc(2)), were synthesized via Heck reaction of p-divinylbenzene (DVB) with O-glycosylated hydroquinones, 2,5-dibromo-4-methoxyphenyl 2-acetamido-3,4,6-tri-O-acetyl-2-deoxy-beta-D-glucopyranoside (3) and 1,4-bis(O-2,3,4,6-tetra-O-acetyl-beta-D-glucopyranosyl)-2,5-dibromobenzene (6), respectively. Acetyl protecting groups of the PPVs are completely removable under mild conditions (yield 69-87%). The structures were confirmed using (1)H NMR and IR spectra. Size exclusion chromatography (SEC) (eluent: DMF, polystyrene standards) measurements indicated that respective M(n) and M(w)/M(n) values of the obtained polymers are 4.49 x 10(3) and 2.3(5) (PPV-GlcNAc) and 3.86 x 10(3) and 1.3(9) (PPV-Glc(2)). These sugar-containing PPVs are soluble in water/DMF (8/2, v/v) and are recognized by Concanavalin A (Con A), D-glucose-binding protein. Blue shift of lambda(max) of the conjugated polymer backbone was confirmed when the glucose-substituted PPV interacts with Con A. Based on those binding properties, these results revealed that the obtained PPVs with pendant sugars have capabilities for detection of biological stimuli.     

The inhibitory effect of cytosolic fraction of human decidua on prostaglandin synthesis

To elucidate the mechanism of suppression of prostaglandin (PG) production in decidua in early pregnancy, the PG synthetase activity of decidua and mid-secretory endometrium was studied. The microsomal fractions and their supernatants were prepared from the tissue by ultracentrifugation at 105,000 g. The standard incubation mixture consisted of the microsomal fraction and 14C arachidonic acid with cofactors, with incubation being carried out for 10 minutes at 37 degrees C. After extraction, the radioactivity of PGE2 was measured and PG synthetase activity was assayed. The apparent Km value for PG synthetase in decidua was 4.6 +/- 0.14 x 10(-6) M (n = 4), whereas that in endometrium was 4.6 +/- 1.18 x 10(-6) M (n = 3). Subsequently, kinetic studies on PG synthetase inhibitor in decidua were carried out. When sheep seminal vesicle was used as an enzyme source, the decidual supernatant showed competitive inhibition. The inhibitory substance in decidua was inactivated after incubation for 15 minutes at 65 degrees C. It seems likely that the suppression of PG biosynthesis in human decidua in early pregnancy is not due to the difference in PG synthetase found in decidua and in endometrium, but due to the existence of PG synthetase inhibitor in decidua.     

Candida cloacae oxidation of long-chain fatty acids to dioic acids

Candida cloacae cells oxidize long-chain fatty acids to their corresponding dicarboxylic acids (dioic acids) at rates dependent on their chain length and degree of saturation. This is despite the well-known toxicity of the fatty acids. Among the saturated substrates, the oxidation is limited to lauric acid (C12). The addition of pristane (5% v/v), which acts as an inert carrier for the poorly water-soluble substrate, boosts the oxidation of lauric acid to a rate that is comparable to that of dodecane. When dissolved in pristane, myristic (C14) and palmitic (C16) acids are effective carbon sources for C. cloacae, but dioic acid production is very low. Media glucose concentration and pH also influence cell growth and productivity. After the glucose is depleted, oxidation is optimal at a low pH. A two-phase (pristane/water) reaction was tested in a 2-l stirred tank bioreactor in which growth and oxidation were separated. A 50% w/w conversion of lauric acid (10 g/l) to dodecanedioic acid was achieved. The bioreactor also alleviated poor mass transfer characteristics experienced in shake flasks.