Housekeeping sortase facilitates the cell wall anchoring of pilus polymers in Corynebacterium diphtheriae

Many surface proteins in Gram-positive bacteria are covalently linked to the cell wall through a transpeptidation reaction catalysed by the enzyme sortase. Corynebacterium diphtheriae encodes six sortases, five of which are devoted to the assembly of three distinct types of pilus fibres--SrtA for the SpaA-type pilus, SrtB/SrtC for the SpaD-type pilus, and SrtD/SrtE for the SpaH-type pilus. We demonstrate here the function of SrtF, the so-called housekeeping sortase, in the cell wall anchoring of pili. We show that a multiple deletion mutant strain expressing only SrtA secretes a large portion of SpaA polymers into the culture medium, with concomitant decrease in the cell wall-linked pili. The same phenotype is observed with the mutant that is missing SrtF alone. By contrast, a strain that expresses only SrtF displays surface-linked pilins but no polymers. Therefore, SrtF can catalyse the cell wall anchoring of pilin monomers as well as pili, but it does not polymerize pilins. We show that SrtA and SrtF together generate wild-type levels of the SpaA-type pilus on the bacterial surface. Furthermore, by regulating the expression of SpaA in the cell, we demonstrate that the SrtF function becomes critical when the SpaA level is sufficiently high. Together, these findings provide key evidence for a two-stage model of pilus assembly: pilins are first polymerized by a pilus-specific sortase, and the resulting fibre is then attached to the cell wall by either the cognate sortase or the housekeeping sortase.     

Sortases and pilin elements involved in pilus assembly of Corynebacterium diphtheriae

Corynebacterium diphtheriae SpaA pili are composed of three pilin subunits, SpaA, SpaB and SpaC. SpaA, the major pilin protein, is distributed uniformly along the pilus shaft, whereas SpaB is observed at regular intervals, and SpaC seems to be positioned at the pilus tip. Pilus assembly in C. diphtheriae requires the pilin motif and the C-terminal sorting signal of SpaA, and is proposed to occur by a mechanism of ordered cross-linking, whereby pilin-specific sortase enzymes cleave precursor proteins at sorting signals and involve the side-chain amino groups of pilin motif sequences to generate covalent linkages between pilin subunits. We show here that two elements of SpaA pilin precursor, the pilin motif and the sorting signal, are together sufficient to promote the polymerization of an otherwise secreted protein by a process requiring the function of the sortase A gene (srtA). Five other sortase genes are dispensable for SpaA pilus assembly. Further, the incorporation of SpaB into SpaA pili requires a glutamic acid residue within the E box motif of SpaA, a feature that is found to be conserved in other Gram-positive pathogens that encode sortase and pilin subunit genes with sorting signals and pilin motifs. When the main fimbrial subunit of Actinomyces naeslundii type I fimbriae, FimA, is expressed in corynebacteria, C. diphtheriae strain NCTC13129 polymerized FimA to form short fibres. Although C. diphtheriae does not depend on other actinomycetal genes for FimA polymerization, this process involves the pilin motif and the sorting signal of FimA as well as corynebacterial sortase D (SrtD). Thus, pilus assembly in Gram-positive bacteria seems to occur by a universal mechanism of ordered cross-linking of precursor proteins, the multiple conserved features of which are recognized by designated sortase enzymes.     

Assembly of pili on the surface of Corynebacterium diphtheriae

Pili of Gram-negative pathogens are formed from pilin precursor molecules by non-covalent association within the outer membrane envelope. Gram-positive microbes employ the cell wall peptidoglycan as a surface organelle for the covalent attachment of proteins, however, an assembly pathway for pili has not yet been revealed. We show here that pili of Corynebacterium diphtheriae are composed of three pilin subunits, SpaA, SpaB and SpaC. SpaA, the major pilin protein, is distributed uniformly along the pilus shaft, whereas SpaB is observed at regular intervals and SpaC seems positioned at the pilus tip. Assembled pili are released from the bacterial surface by treatment with murein hydrolase, suggesting that the pilus fibres may be anchored to the cell wall envelope. All three pilin subunit proteins are synthesized as precursors carrying N-terminal signal peptides and C-terminal sorting signals. Some, but not all, of the six sortase genes encoded in the genome of C. diphtheriae are required for precursor processing, pilus assembly or cell wall envelope attachment. Pilus assembly is proposed to occur by a mechanism of ordered cross-linking, whereby pilin-specific sortase enzymes cleave precursor proteins at sorting signals and involve the side chain amino groups of pilin motif sequences to generate links between pilin subunits. This covalent tethering of adjacent pilin subunits appears to have evolved in many Gram-positive pathogens that encode sortase and pilin subunit genes with sorting signals and pilin motifs.     

Assembly of distinct pilus structures on the surface of Corynebacterium diphtheriae

Different surface organelles contribute to specific interactions of a pathogen with host tissues or infectious partners. Multiple pilus gene clusters potentially encoding different surface structures have been identified in several gram-positive bacterial genomes sequenced to date, including actinomycetales, clostridia, corynebacteria, and streptococci. Corynebacterium diphtheriae has been shown to assemble a pilus structure, with sortase SrtA essential for the assembly of a major subunit SpaA and two minor proteins, SpaB and SpaC. We report here the characterization of a second pilus consisting of SpaD, SpaE, and SpaF, of which SpaD and SpaE form the pilus shaft and SpaF may be located at the pilus tip. The structure of the SpaDEF pilus contains no SpaABC pilins as detected by immunoelectron microscopy. Neither deletion of spaA nor sortase srtA abolishes SpaDEF pilus formation. The assembly of the SpaDEF pilus requires specific sortases located within the SpaDEF pilus gene cluster. Although either sortase SrtB or SrtC is sufficient to polymerize SpaDF, the incorporation of SpaE into the SpaD pili requires sortase SrtB. In addition, an alanine in place of the lysine of the SpaD pilin motif abrogates pilus polymerization. Thus, SpaD, SpaE, and SpaF constitute a different pilus structure that is independently assembled and morphologically distinct from the SpaABC pili and possibly other pili of C. diphtheriae.     

The basal and major pilins in the Corynebacterium diphtheriae SpaA pilus adopt similar structures that competitively react with the pilin polymerase

Many species of pathogenic gram-positive bacteria display covalently crosslinked protein polymers (called pili or fimbriae) that mediate microbial adhesion to host tissues. These structures are assembled by pilus-specific sortase enzymes that join the pilin components together via lysine-isopeptide bonds. The archetypal SpaA pilus from Corynebacterium diphtheriae is built by the ^CdSrtA pilus-specific sortase, which crosslinks lysine residues within the SpaA and SpaB pilins to build the shaft and base of the pilus, respectively. Here, we show that ^CdSrtA crosslinks SpaB to SpaA via a K139(SpaB)-T494(SpaA) lysine-isopeptide bond. Despite sharing only limited sequence homology, an NMR structure of SpaB reveals striking similarities with the N-terminal domain of SpaA (^NSpaA) that is also crosslinked by ^CdSrtA. In particular, both pilins contain similarly positioned reactive lysine residues and adjacent disordered AB loops that are predicted to be involved in the recently proposed “latch” mechanism of isopeptide bond formation. Competition experiments using an inactive SpaB variant and additional NMR studies suggest that SpaB terminates SpaA polymerization by outcompeting ^NSpaA for access to a shared thioester enzyme–substrate reaction intermediate.     

Corynebacterium diphtheriae employs specific minor pilins to target human pharyngeal epithelial cells

Adherence to host tissues mediated by pili is pivotal in the establishment of infection by many bacterial pathogens. Corynebacterium diphtheriae assembles on its surface three distinct pilus structures. The function and the mechanism of how various pili mediate adherence, however, have remained poorly understood. Here we show that the SpaA-type pilus is sufficient for the specific adherence of corynebacteria to human pharyngeal epithelial cells. The deletion of the spaA gene, which encodes the major pilin forming the pilus shaft, abolishes pilus assembly but not adherence to pharyngeal cells. In contrast, adherence is greatly diminished when either minor pilin SpaB or SpaC is absent. Antibodies directed against either SpaB or SpaC block bacterial adherence. Consistent with a direct role of the minor pilins, latex beads coated with SpaB or SpaC protein bind specifically to pharyngeal cells. Therefore, tissue tropism of corynebacteria for pharyngeal cells is governed by specific minor pilins. Importantly, immunoelectron microscopy and immunofluorescence studies reveal clusters of minor pilins that are anchored to cell surface in the absence of a pilus shaft. Thus, the minor pilins may also be cell wall anchored in addition to their incorporation into pilus structures that could facilitate tight binding to host cells during bacterial infection.     

Acyl Enzyme Intermediates in Sortase-Catalyzed Pilus Morphogenesis in Gram-Positive Bacteria

In gram-positive bacteria, covalently linked pilus polymers are assembled by a specific transpeptidase enzyme called pilus-specific sortase. This sortase is postulated to cleave the LPXTG motif of a pilin precursor between threonine and glycine and to form an acyl enzyme intermediate with the substrate. Pilus polymerization is believed to occur through the resolution of this intermediate upon specific nucleophilic attack by the conserved lysine located within the pilin motif of another pilin monomer, which joins two pilins with an isopeptide bond formed between threonine and lysine. Here, we present evidence for sortase reaction intermediates in Corynebacterium diphtheriae. We show that truncated SrtA mutants that are loosely bound to the cytoplasmic membrane form high-molecular-weight complexes with SpaA polymers secreted into the extracellular milieu. These complexes are not formed with SpaA pilin mutants that have alanine substitutions in place of threonine in the LPXTG motif or lysine in the pilin motif. The same phenotype is observed with alanine substitutions of either the conserved cysteine or histidine residue of SrtA known to be required for catalysis. Remarkably, the assembly of SpaA pili, or the formation of intermediates, is abolished with a SrtA mutant missing the membrane-anchoring domain. We infer that pilus polymerization involves the formation of covalent pilin-sortase intermediates, which occurs within a molecular platform on the exoplasmic face of the cytoplasmic membrane that brings together both sortase and its cognate substrates in close proximity to each other, likely surrounding a secretion apparatus. We present electron microscopic data in support of this picture.Adherence to specific host tissue is a key step in bacterial colonization and the establishment of a successful infection by bacterial pathogens. Bacteria express a variety of adhesive cell surface molecules to bind host cells or other substrates in their natural habitat. The proteinaceous filaments known as pili or fimbriae are a clinically important class of these molecules. Both gram-negative and gram-positive bacteria express pili (6, 8). The gram-positive bacterial pili are unique in three respects (12, 25, 31). First, they represent heterodimeric or heterotrimeric protein polymers in which individual pilin subunits are covalently joined to each other (2, 9, 32). Second, the polymer itself is covalently attached to the cell wall (3, 31). Third, unlike pilus assembly in gram-negative bacteria, many of which require chaperones (26), the polymerization of the gram-positive pili and their cell wall attachment require specific transpeptidase enzymes called sortases (31).Mazmanian and colleagues discovered the sortase SrtA as an enzyme that linked the surface protein A of Staphylococcus aureus to its cell wall (15). Genome sequences revealed that sortases are ubiquitously expressed in gram-positive bacteria, including significant pathogens, such as Actinomyces naeslundii, Bacillus cereus, Corynebacterium diphtheriae, Enterococcus faecalis, Streptococcus agalactiae, and Streptococcus pneumoniae (4, 5, 28). Sortases are classified according to their functions and phylogenic relationships (4, 5). The class that closely matches SrtA of S. aureus in structure and function is now called a housekeeping sortase. Its function is to attach numerous surface proteins to the cell wall (16). Common to each of these cell surface proteins is a cell wall sorting signal with an LPXTG motif that is absolutely necessary for cell wall anchoring (18). Elegant genetic, biochemical, and structural work by the Schneewind laboratory illuminated the universal reaction mechanism of protein sorting in the gram-positive cell wall (14). Cell wall anchoring of surface proteins is catalyzed in two steps. In the first step, SrtA cleaves the TG peptide bond of the LPXTG motif of protein A and forms an acyl enzyme intermediate involving the threonine of protein A and the catalytic cysteine of sortase (22, 27, 29). In the second step, the cleaved protein A is transferred to the cell wall when a nucleophile amine from the lipid II precursor attacks and resolves the acyl enzyme intermediate (20, 21, 30). This seminal work formed the basis of our current model of pilus assembly catalyzed by pilus-specific sortases (12).We have used C. diphtheriae as a model for studies of the mechanism of pilus biogenesis. The corynebacterial genome encodes six different sortases (32). We now know that while five of these sortases (SrtA to -E) are devoted to pilus assembly, even the housekeeping sortase, SrtF, is required for efficient attachment of pili to the cell wall (23). Corynebacteria produce three distinct types of heterotrimeric pili, which are encoded by three pilus islands, each encoding three pilins (namely, SpaABC, SpaDEF, and SpaGHI) plus one or two cognate sortases essential for the assembly of the respective pilus (7, 24, 32). In each case, the prototype pilus represents a shaft structure made of a specific major pilin (namely, SpaA, SpaD, and SpaH) (12). Each type of pilus also contains a minor pilin at the tip (SpaC, SpaF, and SpaG) and another minor pilin dispersed along the shaft, as well as at the base of the pilus (SpaB, SpaE, and SpaI) (12). How are these polymers assembled, and how are they attached to the cell wall? All pilin proteins are predicted to contain in their amino termini a hydrophobic signal sequence necessary for export to the exoplasm by the Sec machinery. In addition, like the cell wall-anchored protein A of S. aureus, a cell wall sorting signal including the LPXTG motif is also present at the carboxy terminus of each of the Spa proteins of corynebacteria and other pilus proteins found in different gram-positive organisms (17). It is thus logical to imagine that the pilus-specific sortase utilizes the LPXTG motif for pilus polymerization, its cell wall anchoring, or both. Substantial genetic, biochemical, and ultrastructural analyses have proved this prediction. Consequently, Ton-That and Schneewind proposed a model of pilus assembly which posited that the basic mechanism of catalysis is conserved between cell wall sorting of surface proteins and the assembly of the pilus (31).According to our current working model (Fig. ​(Fig.1A),1A), the prototype SpaA pilus is assembled as follows. SrtA, which is essential and also specific for SpaA pilus formation, captures and cleaves cognate pilins at the LPXTG motif and forms an acyl enzyme intermediate. To form a dimer of SpaA and SpaC, the proposed tip entity, a conserved lysine in the SpaA pilin motif attacks the Cys-Thr bond of the SpaC-SrtA acyl enzyme intermediate. Shaft formation ensues by the cyclic addition of SpaA to the SpaC-SpaA dimer and the SpaC-SpaA_n oligomer formed in the preceding reaction. When a SpaB is attached to the growing pilus terminus by a similar mechanism involving a critical lysine of SpaB, it acts as a switch, terminating pilus polymerization in favor of cell wall anchoring (11). This happens by the classic resolution reaction mentioned above, which involves the lipid II precursor (28), followed by its linkage to the cell wall (11). Alternatively, the SpaB-containing pilus can elongate further by adding a SpaA subunit to SpaB (11). This model explains all the available genetic and biochemical data we have obtained so far in the corynebacterial system, as well as other systems reported by various investigators.Open in a separate windowFIG. 1.(A) Working model of pilus assembly in C. diphtheriae. Spa pilins are synthesized in the cytoplasm and transported across the cytoplasmic membrane by the Sec machinery. The membrane-bound pilus-specific sortase SrtA cleaves the Spa pilins at the LPXTG motif and forms an acyl enzyme intermediate with the substrates. Pilus polymerization occurs when this intermediate is resolved by a nucleophilic attack by the lysine residue within the pilin motif of an adjacent intermediate. Cell wall anchoring terminates pilus polymerization when SpaB is incorporated into the pilus base by the housekeeping sortase, SrtF (see the text for details). (B) Membrane localization of the pilus-specific sortase SrtA. Corynebacteria grown to mid-log phase were separated from the culture medium (M) by centrifugation. The cell wall (W) was removed from its protoplast by muramidase treatment of the cells. The protoplasts were lysed, and membrane (P*) and cytoplasmic (C) compartments were obtained by ultracentrifugation. Protein samples were separated on 4 to 12% Tris-glycine gradient gels and detected by immunoblotting them with the specific antisera α-SrtA, α-SecA, and α-SpaA. The positions of molecular mass markers (kDa) are indicated. WT, wild type.Significantly, there has been no report demonstrating the proposed intermediates of pilus assembly, to our knowledge. The present study was initiated to explore this key element of our model of pilus assembly, as well as the localization of the sortase in the membrane and its organization in the exoplasmic membrane in relation to the cognate pilins and the general secretion machinery.     

Sortase A substrate specificity in GBS pilus 2a cell wall anchoring

Streptococcus agalactiae, also referred to as Group B Streptococcus (GBS), is one of the most common causes of life-threatening bacterial infections in infants. In recent years cell surface pili have been identified in several Gram-positive bacteria, including GBS, as important virulence factors and promising vaccine candidates. In GBS, three structurally distinct types of pili have been discovered (pilus 1, 2a and 2b), whose structural subunits are assembled in high-molecular weight polymers by specific class C sortases. In addition, the highly conserved housekeeping sortase A (SrtA), whose main role is to link surface proteins to bacterial cell wall peptidoglycan by a transpeptidation reaction, is also involved in pili cell wall anchoring in many bacteria. Through in vivo mutagenesis, we demonstrate that the LPXTG sorting signal of the minor ancillary protein (AP2) is essential for pilus 2a anchoring. We successfully produced a highly purified recombinant SrtA (SrtA(ΔN40)) able to specifically hydrolyze the sorting signal of pilus 2a minor ancillary protein (AP2-2a) and catalyze in vitro the transpeptidation reaction between peptidoglycan analogues and the LPXTG motif, using both synthetic fluorescent peptides and recombinant proteins. By contrast, SrtA(ΔN40) does not catalyze the transpeptidation reaction with substrate-peptides mimicking sorting signals of the other pilus 2a subunits (the backbone protein and the major ancillary protein). Thus, our results add further insight into the proposed model of GBS pilus 2a assembly, in which SrtA is required for pili cell wall covalent attachment, acting exclusively on the minor accessory pilin, representing the terminal subunit located at the base of the pilus.     

Characterization of the SpaCBA pilus fibers in the probiotic Lactobacillus rhamnosus GG

Lactobacillus rhamnosus GG is a human intestinal isolate that has been studied intensively because of its probiotic properties. We have previously shown that L. rhamnosus GG produces proteinaceous pili that earlier had been observed only in Gram-positive pathogens (M. Kankainen et al., Proc. Natl. Acad. Sci. U. S. A. 106:17193-17198, 2009). These pili were found to be encoded by the spaCBA gene cluster, and the pilus-associated SpaC pilin was shown to confer on the cells a mucus-binding ability. In addition to the spaCBA cluster, another putative pilus cluster, spaFED, was predicted from the L. rhamnosus GG genome sequence. Herein, we show that only SpaCBA pili are produced by L. rhamnosus, and we describe a detailed analysis of cell wall-associated and affinity-purified SpaCBA pili by Western blotting and immunogold electron microscopy. Our results indicate that SpaCBA pili are heterotrimeric protrusions with a SpaA subunit as the shaft-forming major pilin. Only a few SpaB subunits could be observed in pilus fibers. Instead, SpaB pilins were found at pilus bases, as assessed by immunogold double labeling of thin sections of cells, suggesting that SpaB is involved in the termination of pilus assembly. The SpaC adhesin was present along the whole pilus length at numbers nearly equaling those of SpaA. The relative amount and uniform distribution of SpaC within pili not only makes it possible to exert both long-distance and intimate contact with host tissue but also provides mucus-binding strength, which explains the prolonged intestinal residency times observed for L. rhamnosus GG compared to that of nonpiliated lactobacilli.     

Assembly mechanism of FCT region type 1 pili in serotype M6 Streptococcus pyogenes

The human pathogen Streptococcus pyogenes produces diverse pili depending on the serotype. We investigated the assembly mechanism of FCT type 1 pili in a serotype M6 strain. The pili were found to be assembled from two precursor proteins, the backbone protein T6 and ancillary protein FctX, and anchored to the cell wall in a manner that requires both a housekeeping sortase enzyme (SrtA) and pilus-associated sortase enzyme (SrtB). SrtB is primarily required for efficient formation of the T6 and FctX complex and subsequent polymerization of T6, whereas proper anchoring of the pili to the cell wall is mainly mediated by SrtA. Because motifs essential for polymerization of pilus backbone proteins in other Gram-positive bacteria are not present in T6, we sought to identify the functional residues involved in this process. Our results showed that T6 encompasses the novel VAKS pilin motif conserved in streptococcal T6 homologues and that the lysine residue (Lys-175) within the motif and cell wall sorting signal of T6 are prerequisites for isopeptide linkage of T6 molecules. Because Lys-175 and the cell wall sorting signal of FctX are indispensable for substantial incorporation of FctX into the T6 pilus shaft, FctX is suggested to be located at the pilus tip, which was also implied by immunogold electron microscopy findings. Thus, the elaborate assembly of FCT type 1 pili is potentially organized by sortase-mediated cross-linking between sorting signals and the amino group of Lys-175 positioned in the VAKS motif of T6, thereby displaying T6 and FctX in a temporospatial manner.     

Structural differences between the Streptococcus agalactiae housekeeping and pilus-specific sortases: SrtA and SrtC1

The assembly of pili on the cell wall of Gram-positive bacteria requires transpeptidase enzymes called sortases. In Streptococcus agalactiae, the PI-1 pilus island of strain 2603V/R encodes two pilus-specific sortases (SrtC1 and SrtC2) and three pilins (GBS80, GBS52 and GBS104). Although either pilus-specific sortase is sufficient for the polymerization of the major pilin, GBS80, incorporation of the minor pilins GBS52 and GBS104 into the pilus structure requires SrtC1 and SrtC2, respectively. The S. agalactiae housekeeping sortase, SrtA, whose gene is present at a different location and does not catalyze pilus polymerization, was shown to be involved in cell wall anchoring of pilus polymers. To understand the structural basis of sortases involved in such diverse functions, we determined the crystal structures of S. agalactiae SrtC1 and SrtA. Both enzymes are made of an eight-stranded beta-barrel core with variations in their active site architecture. SrtA exhibits a catalytic triad arrangement similar to that in Streptococcus pyogenes SrtA but different from that in Staphylococcus aureus SrtA. In contrast, the SrtC1 enzyme contains an N-terminal helical domain and a 'lid' in its putative active site, which is similar to that seen in Streptococcus pneumoniae pilus-specific sortases, although with subtle differences in positioning and composition. To understand the effect of such differences on substrate recognition, we have also determined the crystal structure of a SrtC1 mutant, in which the conserved DP(W/F/Y) motif was replaced with the sorting signal motif of GBS80, IPNTG. By comparing the structures of WT wild type SrtA and SrtC1 and the 'lid' mutant of SrtC1, we propose that structural elements within the active site and the lid may be important for defining the role of specific sortase in pili biogenesis.     

Sortase from Staphylococcus aureus does not contain a thiolate-imidazolium ion pair in its active site

Many surface proteins are anchored to the cell wall by the action of sortase enzymes, a recently discovered family of cysteine transpeptidases. As the surface proteins of human pathogens are frequently required for virulence, the sortase-mediated anchoring reaction represents a potential target for new anti-infective agents. It has been suggested that the sortase from Staphylococcus aureus (SrtA), may use a similar catalytic strategy as the papain cysteine proteases, holding its Cys184 side chain in an active configuration through a thiolate-imidazolium ion interaction with residue His120. To investigate the mechanism of transpeptidation, we have synthesized a peptidyl-vinyl sulfone substrate mimic that irreversibly inhibits SrtA. Through the study of the pH dependence of SrtA inhibition and NMR, we have estimated the pKas of the active site thiol (Cys184) and imidazole (His120) to be approximately 9.4 and 7.0, respectively. These measurements are inconsistent with the existence of a thiolate-imidazolium ion pair and suggest a general base catalysis mechanism during transpeptidation.     

Pilin and Sortase Residues Critical for Endocarditis- and Biofilm-Associated Pilus Biogenesis in Enterococcus faecalis

Enterococci commonly cause hospital-acquired infections, such as infective endocarditis and catheter-associated urinary tract infections. In animal models of these infections, a long hairlike extracellular protein fiber known as the endocarditis- and biofilm-associated (Ebp) pilus is an important virulence factor for Enterococcus faecalis. For Ebp and other sortase-assembled pili, the pilus-associated sortases are essential for fiber formation as they create covalent isopeptide bonds between the sortase recognition motif and the pilin-like motif of the pilus subunits. However, the molecular requirements governing the incorporation of the three pilus subunits (EbpA, EbpB, and EbpC) have not been investigated in E. faecalis. Here, we show that a Lys residue within the pilin-like motif of the EbpC subunit was necessary for EbpC polymerization. However, incorporation of EbpA into the pilus fiber only required its sortase recognition motif (LPXTG), while incorporation of EbpB only required its pilin-like motif. Only the sortase recognition motif would be required for incorporation of the pilus tip subunit, while incorporation of the base subunit would only require the pilin recognition motif. Thus, these data support a model with EbpA at the tip and EbpB at the base of an EbpC polymer. In addition, the housekeeping sortase, SrtA, was found to process EbpB and its predicted catalytic Cys residue was required for efficient cell wall anchoring of mature Ebp pili. Thus, we have defined molecular interactions involved in fiber polymerization, minor subunit organization, and pilus subcellular compartmentalization in the E. faecalis Ebp pilus system. These studies advance our understanding of unique molecular mechanisms of sortase-assembled pilus biogenesis.     

Pilus Biogenesis in Lactococcus lactis: Molecular Characterization and Role in Aggregation and Biofilm Formation

The genome of Lactococcus lactis strain IL1403 harbors a putative pilus biogenesis cluster consisting of a sortase C gene flanked by 3 LPxTG protein encoding genes (yhgD, yhgE, and yhhB), called here pil. However, pili were not detected under standard growth conditions. Over-expression of the pil operon resulted in production and display of pili on the surface of lactococci. Functional analysis of the pilus biogenesis machinery indicated that the pilus shaft is formed by oligomers of the YhgE pilin, that the pilus cap is formed by the YhgD pilin and that YhhB is the basal pilin allowing the tethering of the pilus fibers to the cell wall. Oligomerization of pilin subunits was catalyzed by sortase C while anchoring of pili to the cell wall was mediated by sortase A. Piliated L. lactis cells exhibited an auto-aggregation phenotype in liquid cultures, which was attributed to the polymerization of major pilin, YhgE. The piliated lactococci formed thicker, more aerial biofilms compared to those produced by non-piliated bacteria. This phenotype was attributed to oligomers of YhgE. This study provides the first dissection of the pilus biogenesis machinery in a non-pathogenic Gram-positive bacterium. Analysis of natural lactococci isolates from clinical and vegetal environments showed pili production under standard growth conditions. The identification of functional pili in lactococci suggests that the changes they promote in aggregation and biofilm formation may be important for the natural lifestyle as well as for applications in which these bacteria are used.     

Type III pilus of corynebacteria: Pilus length is determined by the level of its major pilin subunit

Multiple pilus gene clusters have been identified in several gram-positive bacterial genomes sequenced to date, including the Actinomycetales, clostridia, streptococci, and corynebacteria. The genome of Corynebacterium diphtheriae contains three pilus gene clusters, two of which have been previously characterized. Here, we report the characterization of the third pilus encoded by the spaHIG cluster. By using electron microscopy and biochemical analysis, we demonstrate that SpaH forms the pilus shaft, while SpaI decorates the structure and SpaG is largely located at the pilus tip. The assembly of the SpaHIG pilus requires a specific sortase located within the spaHIG pilus gene cluster. Deletion of genes specific for the synthesis and polymerization of the other two pilus types does not affect the SpaHIG pilus. Moreover, SpaH but not SpaI or SpaG is essential for the formation of the filament. When expressed under the control of an inducible promoter, the amount of the SpaH pilin regulates pilus length; no pili are assembled from an SpaH precursor that has an alanine in place of the conserved lysine of the SpaH pilin motif. Thus, the spaHIG pilus gene cluster encodes a pilus structure that is independently assembled and antigenically distinct from other pili of C. diphtheriae. We incorporate these findings in a model of sortase-mediated pilus assembly that may be applicable to many gram-positive pathogens.     

Roles of the sortases of Streptococcus pneumoniae in assembly of the RlrA pilus

Pili have been observed on the surface of several gram-positive bacteria, including Streptococcus pneumoniae. The S. pneumoniae strain TIGR4 pilus is composed of three structural subunit proteins encoded in the rlrA pathogenicity islet, RrgA, RrgB, and RrgC. RrgB comprises the pilus backbone, RrgA is observed at intervals along surface pili, while RrgC is found in a loosely defined relationship with RrgA. We investigated the incorporation of each subunit into pili and the reliance of such placement on each of the other subunits. Both accessory subunits RrgA and RrgC are present in similar quantities in pili of all sizes. However, neither protein is required for the polymerization of RrgB, suggesting a nonessential role for RrgA and RrgC in the initiation of pilus assembly. Additionally, the rlrA islet encodes three sortases, SrtC-1, SrtC-2, and SrtC-3 (formerly SrtB, SrtC, and SrtD), which are divergent in sequence from the housekeeping sortase, SrtA. We determined the contributions of these four sortases to pilus assembly and found that SrtA is dispensable for pilus assembly and localization to the cell wall. Instead, SrtC-1, SrtC-2, and SrtC-3 are responsible for pilus assembly and exhibit functional redundancy with respect to backbone assembly and cell wall localization. A level of specificity and coordination among the class C sortases was revealed by the finding that SrtC-1 and SrtC-3 are required for the incorporation of the accessory subunits and by showing a deleterious effect on pilus assembly upon alteration of the cell wall sorting signals of the accessory subunit proteins.     

The minor pilin subunit Sgp2 is necessary for assembly of the pilus encoded by the srtG cluster of Streptococcus suis

Gram-positive pili are composed of covalently bound pilin subunits whose assembly is mediated via a pilus-specific sortase(s). Major subunits constitute the pilus backbone and are therefore essential for pilus formation. Minor subunits are also incorporated into the pilus, but they are considered to be dispensable for backbone formation. The srtG cluster is one of the putative pilus gene clusters identified in the major swine pathogen Streptococcus suis. It consists of one sortase gene (srtG) and two putative pilin subunit genes (sgp1 and sgp2). In this study, by constructing mutants for each of the genes in the cluster and by both immunoblotting and immunogold electron microscopic analysis with antibodies against Sgp1 and Sgp2, we found that the srtG cluster mediates the expression of pilus-like structures in S. suis strain 89/1591. In this pilus, Sgp1 forms the backbone, whereas Sgp2 is incorporated as the minor subunit. In accordance with the current model of pilus assembly by Gram-positive organisms, the major subunit Sgp1 was indispensable for backbone formation and the cognate sortase SrtG mediated the polymerization of both subunits. However, unlike other well-characterized Gram-positive bacterial pili, the minor subunit Sgp2 was required for polymerization of the major subunit Sgp1. Because Sgp2 homologues are encoded in several other Gram-positive bacterial pilus gene clusters, in some types of pili, minor pilin subunits may contribute to backbone formation by a novel mechanism.     

Structure and Assembly of Group B Streptococcus Pilus 2b Backbone Protein

Group B Streptococcus (GBS) is a major cause of invasive disease in infants. Like other Gram-positive bacteria, GBS uses a sortase C-catalyzed transpeptidation mechanism to generate cell surface pili from backbone and ancillary pilin precursor substrates. The three pilus types identified in GBS contain structural subunits that are highly immunogenic and are promising candidates for the development of a broadly-protective vaccine. Here we report the X-ray crystal structure of the backbone protein of pilus 2b (BP-2b) at 1.06Å resolution. The structure reveals a classical IgG-like fold typical of the pilin subunits of other Gram-positive bacteria. The crystallized portion of the protein (residues 185-468) encompasses domains D2 and D3 that together confer high stability to the protein due to the presence of an internal isopeptide bond within each domain. The D2+D3 region, lacking the N-terminal D1 domain, was as potent as the entire protein in conferring protection against GBS challenge in a well-established mouse model. By site-directed mutagenesis and complementation studies in GBS knock-out strains we identified the residues and motives essential for assembly of the BP-2b monomers into high-molecular weight complexes, thus providing new insights into pilus 2b polymerization.     

Bacillus anthracis sortase A (SrtA) anchors LPXTG motif-containing surface proteins to the cell wall envelope

Cell wall-anchored surface proteins of gram-positive pathogens play important roles during the establishment of many infectious diseases, but the contributions of surface proteins to the pathogenesis of anthrax have not yet been revealed. Cell wall anchoring in Staphylococcus aureus occurs by a transpeptidation mechanism requiring surface proteins with C-terminal sorting signals as well as sortase enzymes. The genome sequence of Bacillus anthracis encodes three sortase genes and eleven surface proteins with different types of cell wall sorting signals. Purified B. anthracis sortase A cleaved peptides encompassing LPXTG motif-type sorting signals between the threonine (T) and the glycine (G) residues in vitro. Sortase A activity could be inhibited by thiol-reactive reagents, similar to staphylococcal sortases. B. anthracis parent strain Sterne 34F(2), but not variants lacking the srtA gene, anchored the collagen-binding MSCRAMM (microbial surface components recognizing adhesive matrix molecules) BasC (BA5258/BAS4884) to the bacterial cell wall. These results suggest that B. anthracis SrtA anchors surface proteins bearing LPXTG motif sorting signals to the cell wall envelope of vegetative bacilli.     

Pilus biogenesis of Gram‐positive bacteria: Roles of sortases and implications for assembly

Successful adherence, colonization, and survival of Gram‐positive bacteria require surface proteins, and multiprotein assemblies called pili. These surface appendages are attractive pharmacotherapeutic targets and understanding their assembly mechanisms is essential for identifying a new class of ‘anti‐infectives’ that do not elicit microbial resistance. Molecular details of the Gram‐negative pilus assembly are available indepth, but the Gram‐positive pilus biogenesis is still an emerging field and investigations continue to reveal novel insights into this process. Pilus biogenesis in Gram‐positive bacteria is a biphasic process that requires enzymes called pilus‐sortases for assembly and a housekeeping sortase for covalent attachment of the assembled pilus to the peptidoglycan cell wall. Emerging structural and functional data indicate that there are at least two groups of Gram‐positive pili, which require either the Class C sortase or Class B sortase in conjunction with LepA/SipA protein for major pilin polymerization. This observation suggests two distinct modes of sortase‐mediated pilus biogenesis in Gram‐positive bacteria. Here we review the structural and functional biology of the pilus‐sortases from select streptococcal pilus systems and their role in Gram‐positive pilus assembly.