ArsD residues Cys12, Cys13, and Cys18 form an As(III)-binding site required for arsenic metallochaperone activity

The ArsA ATPase is the catalytic subunit of the ArsAB pump encoded by the arsRDABC operon of Escherichia coli plasmid R773. ArsD is a metallochaperone that delivers As(III) to ArsA, increasing its affinity for As(III), thus conferring resistance to environmental concentrations of arsenic. R773 ArsD is a homodimer with three vicinal cysteine pairs, Cys(12)-Cys(13), Cys(112)-Cys(113), and Cys(119)-Cys(120), in each subunit. Each vicinal pair binds As(III) or Sb(III). Alignment of the primary sequence of homologues of ArsD indicates that only the first vicinal cysteine pair, Cys(12)-Cys(13), and an additional cysteine, Cys(18), are conserved. The effect of cysteine-to-alanine substitutions and truncations were examined. By yeast two-hybrid analysis, nearly all of the ArsD mutants were able to interact with wild type ArsD, indicating that the mutations do not interfere with dimerization. ArsD mutants with alanines substituting for Cys(112), Cys(113), Cys(119), or Cys(120) individually or in pairs or truncations lacking the vicinal pairs retained ability to interact with ArsA and to activate its ATPase activity. Cells expressing these mutants retained ArsD-enhanced As(III) efflux and resistance. In contrast, mutants with substitutions of conserved Cys(12), Cys(13), or Cys(18), individually or in pairs, were unable to activate ArsA or to enhance the activity of the ArsAB pump. We propose that ArsD residues Cys(12), Cys(13), and Cys(18), but not Cys(112), Cys(113), Cys(119), or Cys(120), are required for delivery of As(III) to and activation of the ArsAB pump.     

Role of vicinal cysteine pairs in metalloid sensing by the ArsD As(III)-responsive repressor

ArsD is a 120-residue repressor that regulates expression of the arsRDABC arsenical resistance operon of plasmid R773 in Escherichia coli. ArsD is released from arsRDABC promoter DNA by binding of the compounds with the metalloids As(III) or Sb(III). ArsD has three vicinal cysteine pairs, Cys-12 and Cys-13, Cys-112 and Cys-113 and Cys-119 and Cys-120. In this study, the role of these three cysteine pairs was investigated. Mutation or deletion of Cys-119-Cys-120 had no effect on repression or metalloid responsiveness in vivo or in vitro. Mutagenesis of either the Cys-12-Cys-13 pair or the Cys-112-Cys-113 pair had no effect on repression but produced loss of inducibility, suggesting that both Cys-12-Cys-13 and Cys-112-Cys-113 may be required for As(III) or Sb(III) responsiveness. Assays of binding of wild-type and mutant ArsDs by As(III) affinity chromatography showed that each of the three vicinal cysteine pairs is capable of binding As(III) independently. The effect of As(III) or Sb(III) on intrinsic protein fluorescence was used to examine the properties of individual cysteine pairs. The fluorescence of Trp-97 was shown to be quenched by the addition of Sb(III) or As(III). The vicinal Cys-112-Cys-113 pair was required for the majority of the metalloid-dependent quenching of Trp-97 fluorescence. The data are consistent with a model in which Cys-12-Cys-13 and Cys-112-Cys-113 form independent As(III) binding sites, both of which are required for in vivo ArsD function.     

ArsD: an As(III) metallochaperone for the ArsAB As(III)-translocating ATPase

The toxic metalloid arsenic is widely disseminated in the environment and causes a variety of health and environment problems. As an adaptation to arsenic-contaminated environments, organisms have developed resistance systems. Many ars operons contain only three genes, arsRBC. Five gene ars operons have two additional genes, arsD and arsA, and these two genes are usually adjacent to each other. ArsA from Escherichia coli plasmid R773 is an ATPase that is the catalytic subunit of the ArsAB As(III) extrusion pump. ArsD was recently identified as an arsenic chaperone to the ArsAB pump, transferring the trivalent metalloids As(III) and Sb(III) to the ArsA subunit of the pump. This increases the affinity of ArsA for As(III), resulting in increased rates if extrusion and resistance to environmentally relevant concentrations of arsenite. ArsD is a homodimer with three vicinal cysteine pairs, Cys12–Cys13, Cys112–Cys113 and Cys119–Cys120, in each subunit. Each vicinal pair binds one As(III) or Sb(III). ArsD mutants with alanines substituting for Cys112, Cys113, Cys119 or Cys120, individually or in pairs or truncations lacking the vicinal pairs, retained ability to interact with ArsA, to activate its ATPase activity. Cells expressing these mutants retained ArsD-enhanced As(III) efflux and resistance. In contrast, mutants with substitutions of conserved Cys12, Cys13 or Cys18, individually or in pairs, were unable to activate ArsA or to enhance the activity of the ArsAB pump. It is proposed that ArsD residues Cys12, Cys13 and Cys18, but not Cys112, Cys113, Cys119 or Cys120, are required for delivery of As(III) to and activation of the ArsAB pump.     

Genetic mapping of the interface between the ArsD metallochaperone and the ArsA ATPase

The ArsD metallochaperone delivers trivalent metalloids, As(III) or Sb(III), to the ArsA ATPase, the catalytic subunit of the ArsAB As(III) efflux pump. Transfer of As(III) increases the affinity of ArsA for As(III), allowing resistance to environmental arsenic concentrations. As(III) transfer is channelled from chaperone to ATPase, implying that ArsD and ArsA form an interface at their metal binding sites. A genetic approach was used to test this hypothesis. Thirteen ArsD mutants exhibiting either weaker or stronger interaction with ArsA were selected by either repressed transactivator yeast two-hybrid or reverse yeast two-hybrid assays. Additionally, Lys-37 and Lys-62 were identified as being involved in ArsD function by site-directed mutagenesis and chemical modification. Substitution at either position with arginine was tolerated, suggesting participation of a positive charge. By yeast two-hybrid analysis K37A and K62A mutants lost interaction with ArsA. All 15 mutations were mapped on the surface of the ArsD structure, and their locations are consistent with a structural model generated by in silico docking. Four are close to metalloid binding site residues Cys-12, Cys-13 and Cys-18, and seven are on the surface of helix 1. These results suggest that the interface involves one surface of helix 1 and the metalloid binding site.     

The ArsD As(III) metallochaperone

Arsenic, a toxic metalloid widely existing in the environment, causes a variety of health problems. The ars operon encoded by Escherichia coli plasmid R773 has arsD and arsA genes, where ArsA is an ATPase that is the catalytic subunit of the ArsAB As(III) extrusion pump, and ArsD is an arsenic chaperone for ArsA. ArsD transfers As(III) to ArsA and increases the affinity of ArsA for As(III), allowing resistance to environmental concentrations of arsenic. Cys12, Cys13 and Cys18 in ArsD form a three sulfur-coordinated As(III) binding site that is essential for metallochaperone activity. ATP hydrolysis by ArsA is required for transfer of As(III) from ArsD to ArsA, suggesting that transfer occurs with a conformation of ArsA that transiently forms during the catalytic cycle. The 1.4 Å x-ray crystal structure of ArsD shows a core of four ??-strands flanked by four ??-helices in a thioredoxin fold. Docking of ArsD with ArsA was modeled in silico. Independently ArsD mutants exhibiting either weaker or stronger interaction with ArsA were selected. The locations of the mutations mapped on the surface of ArsD are consistent with the docking model. The results suggest that the interface with ArsA involves one surface of ??1 helix and metalloid binding site of ArsD.     

Disulfide bond structure and N-glycosylation sites of the extracellular domain of the human interleukin-6 receptor

The high affinity interleukin-6 (IL-6) receptor is a hexameric complex consisting of two molecules each of IL-6, IL-6 receptor (IL-6R), and the high affinity converter and signaling molecule, gp130. The extracellular "soluble" part of the IL-6R (sIL-6R) consists of three domains: an amino-terminal Ig-like domain and two fibronectin-type III (FN III) domains. The two FN III domains comprise the cytokine-binding domain defined by a set of 4 conserved cysteine residues and a WSXWS sequence motif. Here, we have determined the disulfide structure of the human sIL-6R by peptide mapping in the absence and presence of reducing agent. Mass spectrometric analysis of these peptides revealed four disulfide bonds and two free cysteines. The disulfides Cys102-Cys113 and Cys146-Cys157 are consistent with known cytokine-binding domain motifs, and Cys28-Cys77 with known Ig superfamily domains. An unusual cysteine connectivity between Cys6-Cys174, which links the Ig-like and NH2-terminal FN III domains causing them to fold back onto each other, has not previously been observed among cytokine receptors. The two free cysteines (Cys192 and Cys258) were detected as cysteinyl-cysteines, although a small proportion of Cys258 was reactive with the alkylating agent 4-vinylpyridine. Of the four potential N-glycosylation sites, carbohydrate moieties were identified on Asn36, Asn74, and Asn202, but not on Asn226.     

Resonance assignments and secondary structure prediction of the As(III) metallochaperone ArsD in solution

ArsD is a metallochaperone that delivers As(III) to the ArsA ATPase, the catalytic subunit of the ArsAB pump encoded by the arsRDABC operon of Escherichia coli plasmid R773. Conserved ArsD cysteine residues (Cys¹², Cys¹³ and Cys¹⁸) construct the As(III) binding site of the protein, however a global structural understanding of this arsenic binding remains unclear. We have obtained NMR assignments for ArsD as a starting point for probing structural changes on the protein that occur in response to metalloid binding and upon formation of a complex with ArsA. The predicted solution structure of ArsD is in agreement with recently published crystallographic structural results.     

Interchain cysteine bridges control entry of progesterone to the central cavity of the uteroglobin dimer.

The progesterone-binding protein uteroglobin has been expressed in Escherichia coli in an unfused, soluble form. Like mature uteroglobin from rabbit endometrium (UG), the E.coli produced uteroglobin (UG1) dimerizes in vitro, forms an antiparallel dimer with Cys3-Cys69' and Cys69-Cys3' disulfide bonds and binds progesterone under reducing conditions. In order to analyze the dimerization and the reduction dependence of progesterone binding in more detail, we separately replaced cysteine 3 and cysteine 69 by serines. Under reducing conditions, both uteroglobin variants (UG1-3Ser and UG1-69Ser) bind progesterone with the same affinity as the wild-type suggesting that both cysteine residues are not directly involved in progesterone binding. In contrast to the wild-type protein, both cysteine variants also bind progesterone with high affinity in the absence of reducing agents. In addition, UG1-3Ser and UG1-69Ser both form covalently linked homodimers. Thus, unnatural Cys69-69' and Cys3-3' disulfide bonds exist in UG1-3Ser and UG1-69Ser, respectively. These data together with computer models based on X-ray diffraction data strongly support the idea that progesterone reaches its binding site located in an internal hydrophobic cavity via a hydrophobic tunnel along helices 1 and 4. Under non-reducing conditions the tunnel is closed by two disulfide bridges (Cys3-Cys69' and Cys69-Cys3') that lie in the most flexible region of the dimer. Reduction or replacement of a cysteine residue enables conformational changes that open the channel allowing progesterone to enter.     

Characterization of the metalloactivation domain of an arsenite/antimonite resistance pump

The ArsAB extrusion pump encoded by the ars operon of Escherichia coli plasmid R773 confers resistance to the toxic trivalent metalloids arsenite [As(III)] and antimonite [Sb(III)]. The ArsA ATPase, the catalytic subunit of the pump, has two homologous halves, A1 and A2. At the interface of these two halves are two nucleotide-binding domains and a metalloid-binding domain. Cys-113 and Cys-422 have been shown to form a high-affinity metalloid binding site. The crystal structure of ArsA shows two other bound metalloid atoms, one liganded to Cys-172 and His-453, and the other liganded to His-148 and Ser-420. The contribution of those putative metalloid sites was examined. There was little effect of mutagenesis of residues His-148 and Ser-420 on metalloid binding. However, a C172A ArsA mutant and C172A/H453A double mutant exhibited significantly decreased affinity for Sb(III). These results suggest first that there is only a single high-affinity metalloid binding site in ArsA, and second that Cys-172 controls the affinity of this site for metalloid and hence the efficiency of metalloactivation of the ArsAB efflux pump.     

The tethering arm of the EGF receptor is required for negative cooperativity and signal transduction

The EGF receptor is a classical receptor-tyrosine kinase. In the absence of ligand, the receptor adopts a closed conformation in which the dimerization arm of subdomain II interacts with the tethering arm in subdomain IV. Following the binding of EGF, the receptor opens to form a symmetric, back-to-back dimer. Although it is clear that the dimerization arm of subdomain II is central to the formation of receptor dimers, the role of the tethering arm of subdomain IV (residues 561-585) in this configuration is not known. Here we use (125)I-EGF binding studies to assess the functional role of the tethering arm in the EGF receptor dimer. Mutation of the three major residues that contribute to tethering (D563A,H566A,K585A-EGF receptor) did not significantly alter either the ligand binding properties or the signaling properties of the EGF receptor. By contrast, breaking the Cys(558)-Cys(567) disulfide bond through double alanine replacements or deleting the loop entirely led to a decrease in the negative cooperativity in EGF binding and was associated with small changes in downstream signaling. Deletion of the Cys(571)-Cys(593) disulfide bond abrogated cooperativity, resulting in a high affinity receptor and increased sensitivity of downstream signaling pathways to EGF. Releasing the Cys(571)-Cys(593) disulfide bond resulted in extreme negative cooperativity, ligand-independent kinase activity, and impaired downstream signaling. These data demonstrate that the tethering arm plays an important role in supporting cooperativity in ligand binding. Because cooperativity implies subunit-subunit interactions, these results also suggest that the tethering arm contributes to intersubunit interactions within the EGF receptor dimer.     

Cys-113 and Cys-422 form a high affinity metalloid binding site in the ArsA ATPase

The arsRDABC operon of Escherichia coli plasmid R773 encodes the ArsAB extrusion pump for the trivalent metalloids As(III) and Sb(III). ArsA, the catalytic subunit has two homologous halves, A1 and A2. Each half has a consensus signal transduction domain that physically connects the nucleotide-binding domain to the metalloid-binding domain. The relation between metalloid binding by ArsA and transport through ArsB is unclear. In this study, direct metalloid binding to ArsA was examined. The results show that ArsA binds a single Sb(III) with high affinity only in the presence of Mg(2+)-nucleotide. Mutation of the codons for Cys-113 and Cys-422 eliminated Sb(III) binding to purified ArsA. C113A/C422A ArsA has basal ATPase activity similar to that of the wild type but lacks metalloid-stimulated activity. Accumulation of metalloid was assayed in intact cells, where reduced uptake results from active extrusion by the ArsAB pump. Cells expressing the arsA(C113A/C422A)B genes had an intermediate level of metalloid resistance and accumulation between those expressing only arsB alone and those expressing wild type arsAB genes. The results indicate that, whereas metalloid stimulation of ArsA activity enhances the ability of the pump to reduce the intracellular concentration of metalloid, high affinity binding of metalloid by ArsA is not obligatory for transport or resistance. Yet, in mixed populations of cells bearing either arsAB or arsA(C113A/C422A)B growing in subtoxic concentrations of arsenite, cells bearing wild type arsAB replaced cells with mutant arsA(C113A/C422A)B in less than 1 week, showing that the metalloid binding site confers an evolutionary advantage.     

Binding and transport of metal ions at the dimer interface of the Escherichia coli metal transporter YiiP

YiiP is a representative member of the cation diffusion facilitator (CDF) family, a class of ubiquitous metal transporters that play an essential role in metal homeostasis. Recently, a pair of Zn2+/Cd2+-selective binding sites has been localized to two highly conserved aspartyl residues (Asp157), each in a 2-fold-symmetry-related transmembrane segment 5 (TM5) of a YiiP homodimer. Here we report the functional and structural interactions between Asp157 and yet another highly conserved Asp49 in the TM2. Calorimetric binding analysis indicated that Asp49 and Asp157 contribute to a common Cd2+ binding site in each subunit. Copper phenanthroline oxidation of YiiP(D49C), YiiP(D157C), and YiiP(D49C/D157C) yielded inter- and intra-subunit cross-links among Cys49 and Cys157, consistent with the spatial proximity of two (Asp49-Asp157) sites at the dimer interface. Hg2+ binding to YiiP(D49C) or YiiP(D49C/D157C) also yielded a Cys49-Hg2+-Cys49 biscysteinate complex across the dimer interface, further establishing the interfacial location of a (Asp49-Asp157)2 bimetal binding center. Two bound Cd2+ ions were found transported cooperatively with a sigmoidal dependence on the Cd2+ concentration (n = 1.4). The binding affinity, transport cooperativity, and rate were modestly reduced by either a D49C or D157C mutation, but greatly diminished when all the bidentate aspartate O-ligands in (Asp49-Asp157)2 were replaced by the monodentate cysteine S-ligands. The functional significance of these findings is discussed based on the unique coordination chemistry of aspartyl residues and a model for the translocation pathway of metal ions at the YiiP dimer interface.     

An engineered intersubunit disulfide enhances the stability and DNA binding of the N-terminal domain of lambda repressor

Site-directed mutagenesis has been used to replace Tyr-88 at the dimer interface of the N-terminal domain of lambda repressor with cysteine. Computer model building had suggested that this substitution would allow formation of an intersubunit disulfide without disruption of the dimer structure [Pabo, C. O., & Suchanek, E. G. (1986) Biochemistry (preceding paper in this issue)]. We find that the Cys-88 protein forms a disulfide-bonded dimer that is very stable to reduction by dithiothreitol and has increased operator DNA binding activity. The covalent Cys88-Cys88' dimer is also considerably more stable than the wild-type protein to thermal denaturation or urea denaturation. As a control, Tyr-85 was replaced with cysteine. A Cys85-Cys85' disulfide cannot form without disrupting the wild-type structure, and we find that this disulfide bond reduces the DNA binding activity and stability of the N-terminal domain.     

Allochromatium vinosum DsrC: solution-state NMR structure, redox properties, and interaction with DsrEFH, a protein essential for purple sulfur bacterial sulfur oxidation

Sequenced genomes of dissimilatory sulfur-oxidizing and sulfate-reducing bacteria containing genes coding for DsrAB, the enzyme dissimilatory sulfite reductase, inevitably also contain the gene coding for the 12-kDa DsrC protein. DsrC is thought to have a yet unidentified role associated with the activity of DsrAB. Here we report the solution structure of DsrC from the sulfur-oxidizing purple sulfur bacterium Allochromatium vinosum determined with NMR spectroscopy in reducing conditions, and we describe the redox behavior of two conserved cysteine residues upon transfer to an oxidizing environment. In reducing conditions, the DsrC structure is disordered in the highly conserved carboxy-terminus. We present multiple lines of evidence that, in oxidizing conditions, a strictly conserved cysteine (Cys111) at the penultimate position in the sequence forms an intramolecular disulfide bond with Cys100, which is conserved in DsrC in all organisms with DsrAB. While an intermolecular Cys111-Cys111 disulfide-bonded dimer is rapidly formed under oxidizing conditions, the intramolecularly disulfide-bonded species (Cys100-Cys111) is the thermodynamically stable form of the protein under these conditions. Treatment of the disulfidic forms with reducing agent regenerates the monomeric species that was structurally characterized. Using a band-shift technique under nondenaturing conditions, we obtained evidence for the interaction of DsrC with heterohexameric DsrEFH, a protein encoded in the same operon. Mutation of Cys100 to serine prevented formation of the DsrC species assigned as an intramolecular disulfide in oxidizing conditions, while still allowing formation of the intermolecular Cys111-Cys111 dimer. In the reduced form, this mutant protein still interacted with DsrEFH. This was not the case for the Cys111Ser and Cys100Ser/Cys111Ser mutants, both of which also did not form protein dimers. Our observations highlight the central importance of the carboxy-terminal DsrC cysteine residues and are consistent with a role as a sulfur-substrate binding/transferring protein, as well as with an electron-transfer function via thiol-disulfide interchanges.     

Crystal structure of Escherichia coli thiol peroxidase in the oxidized state: insights into intramolecular disulfide formation and substrate binding in atypical 2-Cys peroxiredoxins

Thioredoxin-dependent thiol peroxidase (Tpx) from Escherichia coli represents a group of antioxidant enzymes that are widely distributed in pathogenic bacterial species and which belong to the peroxiredoxin (Prx) family. Bacterial Tpxs are unique in that the location of the resolving cysteine (CR) is different from those of other Prxs. E. coli Tpx (EcTpx) shows substrate specificity toward alkyl hydroperoxides over H2O2 and is the most potent reductant of alkyl hydroperoxides surpassing AhpC and BCP, the other E. coli Prx members. Here, we present the crystal structure of EcTpx in the oxidized state determined at 2.2-A resolution. The structure revealed that Tpxs are the second type of atypical 2-Cys Prxs with an intramolecular disulfide bond formed between the peroxidatic (CP, Cys61) and resolving (Cys95) cysteine residues. The extraordinarily long N-terminal chain of EcTpx folds into a beta-hairpin making the overall structure very compact. Modeling suggests that, in atypical 2-Cys Prxs, the CR-loop as well as the CP-loop may alternately assume the fully folded or locally unfolded conformation depending on redox states, as does the CP-loop in typical 2-Cys Prxs. EcTpx exists as a dimer stabilized by hydrogen bonds. Its substrate binding site extends to the dimer interface. A modeled structure of the reduced EcTpx in complex with 15-hydroperoxyeicosatetraenoic acid suggests that the size and shape of the binding site are particularly suited for long fatty acid hydroperoxides consistent with its greater reactivity.     

Structural determinants of substrate access to the disulfide oxidase Erv2p

Erv2p is a small, dimeric FAD-dependent sulfhydryl oxidase that generates disulfide bonds in the lumen of the endoplasmic reticulum. Mutagenic and structural studies suggest that Erv2p uses an internal thiol-transfer relay between the FAD-proximal active site cysteine pair (Cys121-Cys124) and a second cysteine pair (Cys176-Cys178) located in a flexible, substrate-accessible C-terminal tail of the adjacent dimer subunit. Here, we demonstrate that Cys176 and Cys178 are the only amino acids in the tail region required for disulfide transfer and that their relative positioning within the tail peptide is important for activity. However, intragenic suppressor mutations could be isolated that bypass the requirement for Cys176 and Cys178. These mutants were found to disrupt Erv2p dimerization and to increase the activity of Erv2p for thiol substrates such as glutathione. We propose that the two Erv2p subunits act together to direct the disulfide transfer to specific substrates. One subunit provides the catalytic domain composed of the active site cysteine residues and the FAD cofactor, while the second subunit appears to have two functions: it facilitates disulfide transfer to substrates via the tail cysteine residues, while simultaneously shielding the active site cysteine residues from non-specific reactions.     

The Functions of Crucial Cysteine Residues in the Arsenite Methylation Catalyzed by Recombinant Human Arsenic (III) Methyltransferase

Arsenic (III) methyltransferase (AS3MT) is a cysteine (Cys)-rich enzyme that catalyzes the biomethylation of arsenic. To investigate how these crucial Cys residues promote catalysis, we used matrix-assisted laser desorption ionization-time of flight-mass spectrometry (MALDI-TOF-MS) to analyze Cys residues in recombinant human arsenic (III) methyltransferase (hAS3MT). We detected two disulfide bonds, Cys250-Cys32 and Cys368-Cys369, in hAS3MT. The Cys250-Cys32 disulfide bond was reduced by glutathione (GSH) or other disulfide bond reductants before the enzymatic methylation of arsenite (iAs³⁺). In addition to exposing residues around the active sites, cleavage of the Cys250-Cys32 pair modulated the conformation of hAS3MT. This adjustment may stabilize the binding of S-Adenosyl-L-methionine (AdoMet) and favor iAs³⁺ binding to hAS3MT. Additionally, we observed the intermediate of Cys250-S-adenosylhomocysteine (AdoHcy), suggesting that Cys250 is involved in the transmethylation. In recovery experiments, we confirmed that trivalent arsenicals were substrates for hAS3MT, methylation of arsenic occurred on the enzyme, and an intramolecular disulfide bond might be formed after iAs³⁺ was methylated to dimethylarsinous acid (DMA³⁺). In this work, we clarified both the functional roles of GSH and the crucial Cys residues in iAs³⁺ methylation catalyzed by hAS3MT.     

Kinetic characterization of native and cysteine 112-modified glutathione S-transferase A1-1: reassessment of nonsubstrate ligand binding

We have prepared human glutathione S-transferase isoform A1-1 (GST A1-1) which has been chemically modified at cysteine 112. These modifications include formation of mixed disulfides with glutathione ("glutathiolation") and cross-linkage of the GST dimer with bis-maleimides reacting with the equivalent Cys 112 residues of the two monomers. This residue (Cys 112) lies adjacent to the hydrophobic substrate binding site, and its side chain thiol projects into the large, solvent-filled cleft which is widely reported in the literature to be the binding site of nonsubstrate ligands. Both types of modification block this intersubunit cleft region and significantly change its chemical environment. Kinetic experiments with these altered enzymes revealed that neither type of modification affects the catalytic activity of GST A1-1 or the binding of nonsubstrate ligands. The lack of an effect on glutathione conjugation activity is somewhat surprising given the proximity of cysteine 112 to the hydrophobic substrate binding site. More surprising, however, is the observation that modification at cysteine 112 has no effect on the binding of nonsubstrate ligands. Furthermore, two of these ligands, lithocholic acid and estradiol disulfate, unexpectedly exhibited competitive inhibition of the unmodified enzyme, suggesting that they bind in the hydrophobic substrate site rather than some accessory ligand binding site. Together, these results strongly argue against the intersubunit cleft as the nonsubstrate ligand binding site and prompt a reassessment of how these ligands interact with GST A1-1.